Class DashIsoGroupSettings
- All Implemented Interfaces:
Serializable
,SdkPojo
,ToCopyableBuilder<DashIsoGroupSettings.Builder,
DashIsoGroupSettings>
- See Also:
-
Nested Class Summary
-
Method Summary
Modifier and TypeMethodDescriptionfinal List
<DashAdditionalManifest> By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job.Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one.final String
Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one.final String
baseUrl()
A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element.static DashIsoGroupSettings.Builder
builder()
final DashManifestStyle
Specify how MediaConvert writes SegmentTimeline in your output DASH manifest.final String
Specify how MediaConvert writes SegmentTimeline in your output DASH manifest.final String
Use Destination to specify the S3 output location and the output filename base.final DestinationSettings
Settings associated with the destination.DRM settings.final boolean
final boolean
equalsBySdkFields
(Object obj) Indicates whether some other object is "equal to" this one by SDK fields.final Integer
Length of fragments to generate (in seconds).final <T> Optional
<T> getValueForField
(String fieldName, Class<T> clazz) final boolean
For responses, this returns true if the service returned a value for the AdditionalManifests property.final int
hashCode()
final DashIsoHbbtvCompliance
Supports HbbTV specification as indicatedfinal String
Supports HbbTV specification as indicatedSpecify whether MediaConvert generates images for trick play.final String
Specify whether MediaConvert generates images for trick play.Tile and thumbnail settings applicable when imageBasedTrickPlay is ADVANCEDfinal Integer
Minimum time of initially buffered media that is needed to ensure smooth playout.final Double
Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset.Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest.final String
Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest.final DashIsoMpdProfile
Specify whether your DASH profile is on-demand or main.final String
Specify whether your DASH profile is on-demand or main.Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS).final String
Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS).final DashIsoSegmentControl
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length.final String
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length.final Integer
Specify the length, in whole seconds, of each segment.Specify how you want MediaConvert to determine the segment length.final String
Specify how you want MediaConvert to determine the segment length.static Class
<? extends DashIsoGroupSettings.Builder> Take this object and create a builder that contains all of the current property values of this object.final String
toString()
Returns a string representation of this object.Specify the video sample composition time offset mode in the output fMP4 TRUN box.final String
Specify the video sample composition time offset mode in the output fMP4 TRUN box.If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again.final String
If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again.Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder
copy
-
Method Details
-
hasAdditionalManifests
public final boolean hasAdditionalManifests()For responses, this returns true if the service returned a value for the AdditionalManifests property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
additionalManifests
By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasAdditionalManifests()
method.- Returns:
- By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
-
audioChannelConfigSchemeIdUri
Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.If the service returns an enum value that is not available in the current SDK version,
audioChannelConfigSchemeIdUri
will returnDashIsoGroupAudioChannelConfigSchemeIdUri.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromaudioChannelConfigSchemeIdUriAsString()
.- Returns:
- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
- See Also:
-
audioChannelConfigSchemeIdUriAsString
Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.If the service returns an enum value that is not available in the current SDK version,
audioChannelConfigSchemeIdUri
will returnDashIsoGroupAudioChannelConfigSchemeIdUri.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromaudioChannelConfigSchemeIdUriAsString()
.- Returns:
- Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
- See Also:
-
baseUrl
A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.- Returns:
- A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
-
dashManifestStyle
Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.If the service returns an enum value that is not available in the current SDK version,
dashManifestStyle
will returnDashManifestStyle.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdashManifestStyleAsString()
.- Returns:
- Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.
- See Also:
-
dashManifestStyleAsString
Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.If the service returns an enum value that is not available in the current SDK version,
dashManifestStyle
will returnDashManifestStyle.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromdashManifestStyleAsString()
.- Returns:
- Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.
- See Also:
-
destination
Use Destination to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.- Returns:
- Use Destination to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
-
destinationSettings
Settings associated with the destination. Will vary based on the type of destination- Returns:
- Settings associated with the destination. Will vary based on the type of destination
-
encryption
DRM settings.- Returns:
- DRM settings.
-
fragmentLength
Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.- Returns:
- Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
-
hbbtvCompliance
Supports HbbTV specification as indicatedIf the service returns an enum value that is not available in the current SDK version,
hbbtvCompliance
will returnDashIsoHbbtvCompliance.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromhbbtvComplianceAsString()
.- Returns:
- Supports HbbTV specification as indicated
- See Also:
-
hbbtvComplianceAsString
Supports HbbTV specification as indicatedIf the service returns an enum value that is not available in the current SDK version,
hbbtvCompliance
will returnDashIsoHbbtvCompliance.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromhbbtvComplianceAsString()
.- Returns:
- Supports HbbTV specification as indicated
- See Also:
-
imageBasedTrickPlay
Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.mdIf the service returns an enum value that is not available in the current SDK version,
imageBasedTrickPlay
will returnDashIsoImageBasedTrickPlay.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromimageBasedTrickPlayAsString()
.- Returns:
- Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.md
- See Also:
-
imageBasedTrickPlayAsString
Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.mdIf the service returns an enum value that is not available in the current SDK version,
imageBasedTrickPlay
will returnDashIsoImageBasedTrickPlay.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromimageBasedTrickPlayAsString()
.- Returns:
- Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.md
- See Also:
-
imageBasedTrickPlaySettings
Tile and thumbnail settings applicable when imageBasedTrickPlay is ADVANCED- Returns:
- Tile and thumbnail settings applicable when imageBasedTrickPlay is ADVANCED
-
minBufferTime
Minimum time of initially buffered media that is needed to ensure smooth playout.- Returns:
- Minimum time of initially buffered media that is needed to ensure smooth playout.
-
minFinalSegmentLength
Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.- Returns:
- Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
-
mpdManifestBandwidthType
Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.If the service returns an enum value that is not available in the current SDK version,
mpdManifestBandwidthType
will returnDashIsoMpdManifestBandwidthType.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frommpdManifestBandwidthTypeAsString()
.- Returns:
- Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
- See Also:
-
mpdManifestBandwidthTypeAsString
Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.If the service returns an enum value that is not available in the current SDK version,
mpdManifestBandwidthType
will returnDashIsoMpdManifestBandwidthType.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frommpdManifestBandwidthTypeAsString()
.- Returns:
- Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
- See Also:
-
mpdProfile
Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.If the service returns an enum value that is not available in the current SDK version,
mpdProfile
will returnDashIsoMpdProfile.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frommpdProfileAsString()
.- Returns:
- Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.
- See Also:
-
mpdProfileAsString
Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.If the service returns an enum value that is not available in the current SDK version,
mpdProfile
will returnDashIsoMpdProfile.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available frommpdProfileAsString()
.- Returns:
- Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.
- See Also:
-
ptsOffsetHandlingForBFrames
Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.If the service returns an enum value that is not available in the current SDK version,
ptsOffsetHandlingForBFrames
will returnDashIsoPtsOffsetHandlingForBFrames.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromptsOffsetHandlingForBFramesAsString()
.- Returns:
- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
- See Also:
-
ptsOffsetHandlingForBFramesAsString
Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.If the service returns an enum value that is not available in the current SDK version,
ptsOffsetHandlingForBFrames
will returnDashIsoPtsOffsetHandlingForBFrames.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromptsOffsetHandlingForBFramesAsString()
.- Returns:
- Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
- See Also:
-
segmentControl
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.If the service returns an enum value that is not available in the current SDK version,
segmentControl
will returnDashIsoSegmentControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsegmentControlAsString()
.- Returns:
- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
- See Also:
-
segmentControlAsString
When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.If the service returns an enum value that is not available in the current SDK version,
segmentControl
will returnDashIsoSegmentControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsegmentControlAsString()
.- Returns:
- When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
- See Also:
-
segmentLength
Specify the length, in whole seconds, of each segment. When you don't specify a value, MediaConvert defaults to 30. Related settings: Use Segment length control to specify whether the encoder enforces this value strictly. Use Segment control to specify whether MediaConvert creates separate segment files or one content file that has metadata to mark the segment boundaries.- Returns:
- Specify the length, in whole seconds, of each segment. When you don't specify a value, MediaConvert defaults to 30. Related settings: Use Segment length control to specify whether the encoder enforces this value strictly. Use Segment control to specify whether MediaConvert creates separate segment files or one content file that has metadata to mark the segment boundaries.
-
segmentLengthControl
Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.If the service returns an enum value that is not available in the current SDK version,
segmentLengthControl
will returnDashIsoSegmentLengthControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsegmentLengthControlAsString()
.- Returns:
- Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.
- See Also:
-
segmentLengthControlAsString
Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.If the service returns an enum value that is not available in the current SDK version,
segmentLengthControl
will returnDashIsoSegmentLengthControl.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsegmentLengthControlAsString()
.- Returns:
- Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.
- See Also:
-
videoCompositionOffsets
Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.If the service returns an enum value that is not available in the current SDK version,
videoCompositionOffsets
will returnDashIsoVideoCompositionOffsets.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromvideoCompositionOffsetsAsString()
.- Returns:
- Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
- See Also:
-
videoCompositionOffsetsAsString
Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.If the service returns an enum value that is not available in the current SDK version,
videoCompositionOffsets
will returnDashIsoVideoCompositionOffsets.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromvideoCompositionOffsetsAsString()
.- Returns:
- Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
- See Also:
-
writeSegmentTimelineInRepresentation
If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.If the service returns an enum value that is not available in the current SDK version,
writeSegmentTimelineInRepresentation
will returnDashIsoWriteSegmentTimelineInRepresentation.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromwriteSegmentTimelineInRepresentationAsString()
.- Returns:
- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
- See Also:
-
writeSegmentTimelineInRepresentationAsString
If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.If the service returns an enum value that is not available in the current SDK version,
writeSegmentTimelineInRepresentation
will returnDashIsoWriteSegmentTimelineInRepresentation.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromwriteSegmentTimelineInRepresentationAsString()
.- Returns:
- If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
- See Also:
-
toBuilder
Description copied from interface:ToCopyableBuilder
Take this object and create a builder that contains all of the current property values of this object.- Specified by:
toBuilder
in interfaceToCopyableBuilder<DashIsoGroupSettings.Builder,
DashIsoGroupSettings> - Returns:
- a builder for type T
-
builder
-
serializableBuilderClass
-
hashCode
public final int hashCode() -
equals
-
equalsBySdkFields
Description copied from interface:SdkPojo
Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in anSdkPojo
class, and is generated based on a service model.If an
SdkPojo
class does not have any inherited fields,equalsBySdkFields
andequals
are essentially the same.- Specified by:
equalsBySdkFields
in interfaceSdkPojo
- Parameters:
obj
- the object to be compared with- Returns:
- true if the other object equals to this object by sdk fields, false otherwise.
-
toString
Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value. -
getValueForField
-
sdkFields
-