Interface WafRegionalClient
- All Superinterfaces:
AutoCloseable
,AwsClient
,SdkAutoCloseable
,SdkClient
builder()
method.
This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
This is the AWS WAF Regional Classic API Reference for using AWS WAF Classic with the AWS resources, Elastic Load Balancing (ELB) Application Load Balancers and API Gateway APIs. The AWS WAF Classic actions and data types listed in the reference are available for protecting Elastic Load Balancing (ELB) Application Load Balancers and API Gateway APIs. You can use these actions and data types by means of the endpoints listed in AWS Regions and Endpoints. This guide is for developers who need detailed information about the AWS WAF Classic API actions, data types, and errors. For detailed information about AWS WAF Classic features and an overview of how to use the AWS WAF Classic API, see the AWS WAF Classic in the developer guide.
-
Field Summary
Modifier and TypeFieldDescriptionstatic final String
Value for looking up the service's metadata from theServiceMetadataProvider
.static final String
-
Method Summary
Modifier and TypeMethodDescriptiondefault AssociateWebAclResponse
associateWebACL
(Consumer<AssociateWebAclRequest.Builder> associateWebAclRequest) default AssociateWebAclResponse
associateWebACL
(AssociateWebAclRequest associateWebAclRequest) static WafRegionalClientBuilder
builder()
Create a builder that can be used to configure and create aWafRegionalClient
.static WafRegionalClient
create()
Create aWafRegionalClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
.default CreateByteMatchSetResponse
createByteMatchSet
(Consumer<CreateByteMatchSetRequest.Builder> createByteMatchSetRequest) default CreateByteMatchSetResponse
createByteMatchSet
(CreateByteMatchSetRequest createByteMatchSetRequest) default CreateGeoMatchSetResponse
createGeoMatchSet
(Consumer<CreateGeoMatchSetRequest.Builder> createGeoMatchSetRequest) default CreateGeoMatchSetResponse
createGeoMatchSet
(CreateGeoMatchSetRequest createGeoMatchSetRequest) default CreateIpSetResponse
createIPSet
(Consumer<CreateIpSetRequest.Builder> createIpSetRequest) default CreateIpSetResponse
createIPSet
(CreateIpSetRequest createIpSetRequest) default CreateRateBasedRuleResponse
createRateBasedRule
(Consumer<CreateRateBasedRuleRequest.Builder> createRateBasedRuleRequest) default CreateRateBasedRuleResponse
createRateBasedRule
(CreateRateBasedRuleRequest createRateBasedRuleRequest) default CreateRegexMatchSetResponse
createRegexMatchSet
(Consumer<CreateRegexMatchSetRequest.Builder> createRegexMatchSetRequest) default CreateRegexMatchSetResponse
createRegexMatchSet
(CreateRegexMatchSetRequest createRegexMatchSetRequest) default CreateRegexPatternSetResponse
createRegexPatternSet
(Consumer<CreateRegexPatternSetRequest.Builder> createRegexPatternSetRequest) default CreateRegexPatternSetResponse
createRegexPatternSet
(CreateRegexPatternSetRequest createRegexPatternSetRequest) default CreateRuleResponse
createRule
(Consumer<CreateRuleRequest.Builder> createRuleRequest) default CreateRuleResponse
createRule
(CreateRuleRequest createRuleRequest) default CreateRuleGroupResponse
createRuleGroup
(Consumer<CreateRuleGroupRequest.Builder> createRuleGroupRequest) default CreateRuleGroupResponse
createRuleGroup
(CreateRuleGroupRequest createRuleGroupRequest) default CreateSizeConstraintSetResponse
createSizeConstraintSet
(Consumer<CreateSizeConstraintSetRequest.Builder> createSizeConstraintSetRequest) default CreateSizeConstraintSetResponse
createSizeConstraintSet
(CreateSizeConstraintSetRequest createSizeConstraintSetRequest) createSqlInjectionMatchSet
(Consumer<CreateSqlInjectionMatchSetRequest.Builder> createSqlInjectionMatchSetRequest) createSqlInjectionMatchSet
(CreateSqlInjectionMatchSetRequest createSqlInjectionMatchSetRequest) default CreateWebAclResponse
createWebACL
(Consumer<CreateWebAclRequest.Builder> createWebAclRequest) default CreateWebAclResponse
createWebACL
(CreateWebAclRequest createWebAclRequest) createWebACLMigrationStack
(Consumer<CreateWebAclMigrationStackRequest.Builder> createWebAclMigrationStackRequest) Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket.createWebACLMigrationStack
(CreateWebAclMigrationStackRequest createWebAclMigrationStackRequest) Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket.default CreateXssMatchSetResponse
createXssMatchSet
(Consumer<CreateXssMatchSetRequest.Builder> createXssMatchSetRequest) default CreateXssMatchSetResponse
createXssMatchSet
(CreateXssMatchSetRequest createXssMatchSetRequest) default DeleteByteMatchSetResponse
deleteByteMatchSet
(Consumer<DeleteByteMatchSetRequest.Builder> deleteByteMatchSetRequest) default DeleteByteMatchSetResponse
deleteByteMatchSet
(DeleteByteMatchSetRequest deleteByteMatchSetRequest) default DeleteGeoMatchSetResponse
deleteGeoMatchSet
(Consumer<DeleteGeoMatchSetRequest.Builder> deleteGeoMatchSetRequest) default DeleteGeoMatchSetResponse
deleteGeoMatchSet
(DeleteGeoMatchSetRequest deleteGeoMatchSetRequest) default DeleteIpSetResponse
deleteIPSet
(Consumer<DeleteIpSetRequest.Builder> deleteIpSetRequest) default DeleteIpSetResponse
deleteIPSet
(DeleteIpSetRequest deleteIpSetRequest) deleteLoggingConfiguration
(Consumer<DeleteLoggingConfigurationRequest.Builder> deleteLoggingConfigurationRequest) deleteLoggingConfiguration
(DeleteLoggingConfigurationRequest deleteLoggingConfigurationRequest) default DeletePermissionPolicyResponse
deletePermissionPolicy
(Consumer<DeletePermissionPolicyRequest.Builder> deletePermissionPolicyRequest) default DeletePermissionPolicyResponse
deletePermissionPolicy
(DeletePermissionPolicyRequest deletePermissionPolicyRequest) default DeleteRateBasedRuleResponse
deleteRateBasedRule
(Consumer<DeleteRateBasedRuleRequest.Builder> deleteRateBasedRuleRequest) default DeleteRateBasedRuleResponse
deleteRateBasedRule
(DeleteRateBasedRuleRequest deleteRateBasedRuleRequest) default DeleteRegexMatchSetResponse
deleteRegexMatchSet
(Consumer<DeleteRegexMatchSetRequest.Builder> deleteRegexMatchSetRequest) default DeleteRegexMatchSetResponse
deleteRegexMatchSet
(DeleteRegexMatchSetRequest deleteRegexMatchSetRequest) default DeleteRegexPatternSetResponse
deleteRegexPatternSet
(Consumer<DeleteRegexPatternSetRequest.Builder> deleteRegexPatternSetRequest) default DeleteRegexPatternSetResponse
deleteRegexPatternSet
(DeleteRegexPatternSetRequest deleteRegexPatternSetRequest) default DeleteRuleResponse
deleteRule
(Consumer<DeleteRuleRequest.Builder> deleteRuleRequest) default DeleteRuleResponse
deleteRule
(DeleteRuleRequest deleteRuleRequest) default DeleteRuleGroupResponse
deleteRuleGroup
(Consumer<DeleteRuleGroupRequest.Builder> deleteRuleGroupRequest) default DeleteRuleGroupResponse
deleteRuleGroup
(DeleteRuleGroupRequest deleteRuleGroupRequest) default DeleteSizeConstraintSetResponse
deleteSizeConstraintSet
(Consumer<DeleteSizeConstraintSetRequest.Builder> deleteSizeConstraintSetRequest) default DeleteSizeConstraintSetResponse
deleteSizeConstraintSet
(DeleteSizeConstraintSetRequest deleteSizeConstraintSetRequest) deleteSqlInjectionMatchSet
(Consumer<DeleteSqlInjectionMatchSetRequest.Builder> deleteSqlInjectionMatchSetRequest) deleteSqlInjectionMatchSet
(DeleteSqlInjectionMatchSetRequest deleteSqlInjectionMatchSetRequest) default DeleteWebAclResponse
deleteWebACL
(Consumer<DeleteWebAclRequest.Builder> deleteWebAclRequest) default DeleteWebAclResponse
deleteWebACL
(DeleteWebAclRequest deleteWebAclRequest) default DeleteXssMatchSetResponse
deleteXssMatchSet
(Consumer<DeleteXssMatchSetRequest.Builder> deleteXssMatchSetRequest) default DeleteXssMatchSetResponse
deleteXssMatchSet
(DeleteXssMatchSetRequest deleteXssMatchSetRequest) default DisassociateWebAclResponse
disassociateWebACL
(Consumer<DisassociateWebAclRequest.Builder> disassociateWebAclRequest) default DisassociateWebAclResponse
disassociateWebACL
(DisassociateWebAclRequest disassociateWebAclRequest) default GetByteMatchSetResponse
getByteMatchSet
(Consumer<GetByteMatchSetRequest.Builder> getByteMatchSetRequest) default GetByteMatchSetResponse
getByteMatchSet
(GetByteMatchSetRequest getByteMatchSetRequest) default GetChangeTokenResponse
default GetChangeTokenResponse
getChangeToken
(Consumer<GetChangeTokenRequest.Builder> getChangeTokenRequest) default GetChangeTokenResponse
getChangeToken
(GetChangeTokenRequest getChangeTokenRequest) default GetChangeTokenStatusResponse
getChangeTokenStatus
(Consumer<GetChangeTokenStatusRequest.Builder> getChangeTokenStatusRequest) default GetChangeTokenStatusResponse
getChangeTokenStatus
(GetChangeTokenStatusRequest getChangeTokenStatusRequest) default GetGeoMatchSetResponse
getGeoMatchSet
(Consumer<GetGeoMatchSetRequest.Builder> getGeoMatchSetRequest) default GetGeoMatchSetResponse
getGeoMatchSet
(GetGeoMatchSetRequest getGeoMatchSetRequest) default GetIpSetResponse
getIPSet
(Consumer<GetIpSetRequest.Builder> getIpSetRequest) default GetIpSetResponse
getIPSet
(GetIpSetRequest getIpSetRequest) default GetLoggingConfigurationResponse
getLoggingConfiguration
(Consumer<GetLoggingConfigurationRequest.Builder> getLoggingConfigurationRequest) default GetLoggingConfigurationResponse
getLoggingConfiguration
(GetLoggingConfigurationRequest getLoggingConfigurationRequest) default GetPermissionPolicyResponse
getPermissionPolicy
(Consumer<GetPermissionPolicyRequest.Builder> getPermissionPolicyRequest) default GetPermissionPolicyResponse
getPermissionPolicy
(GetPermissionPolicyRequest getPermissionPolicyRequest) default GetRateBasedRuleResponse
getRateBasedRule
(Consumer<GetRateBasedRuleRequest.Builder> getRateBasedRuleRequest) default GetRateBasedRuleResponse
getRateBasedRule
(GetRateBasedRuleRequest getRateBasedRuleRequest) getRateBasedRuleManagedKeys
(Consumer<GetRateBasedRuleManagedKeysRequest.Builder> getRateBasedRuleManagedKeysRequest) getRateBasedRuleManagedKeys
(GetRateBasedRuleManagedKeysRequest getRateBasedRuleManagedKeysRequest) default GetRegexMatchSetResponse
getRegexMatchSet
(Consumer<GetRegexMatchSetRequest.Builder> getRegexMatchSetRequest) default GetRegexMatchSetResponse
getRegexMatchSet
(GetRegexMatchSetRequest getRegexMatchSetRequest) default GetRegexPatternSetResponse
getRegexPatternSet
(Consumer<GetRegexPatternSetRequest.Builder> getRegexPatternSetRequest) default GetRegexPatternSetResponse
getRegexPatternSet
(GetRegexPatternSetRequest getRegexPatternSetRequest) default GetRuleResponse
getRule
(Consumer<GetRuleRequest.Builder> getRuleRequest) default GetRuleResponse
getRule
(GetRuleRequest getRuleRequest) default GetRuleGroupResponse
getRuleGroup
(Consumer<GetRuleGroupRequest.Builder> getRuleGroupRequest) default GetRuleGroupResponse
getRuleGroup
(GetRuleGroupRequest getRuleGroupRequest) default GetSampledRequestsResponse
getSampledRequests
(Consumer<GetSampledRequestsRequest.Builder> getSampledRequestsRequest) default GetSampledRequestsResponse
getSampledRequests
(GetSampledRequestsRequest getSampledRequestsRequest) default GetSizeConstraintSetResponse
getSizeConstraintSet
(Consumer<GetSizeConstraintSetRequest.Builder> getSizeConstraintSetRequest) default GetSizeConstraintSetResponse
getSizeConstraintSet
(GetSizeConstraintSetRequest getSizeConstraintSetRequest) default GetSqlInjectionMatchSetResponse
getSqlInjectionMatchSet
(Consumer<GetSqlInjectionMatchSetRequest.Builder> getSqlInjectionMatchSetRequest) default GetSqlInjectionMatchSetResponse
getSqlInjectionMatchSet
(GetSqlInjectionMatchSetRequest getSqlInjectionMatchSetRequest) default GetWebAclResponse
getWebACL
(Consumer<GetWebAclRequest.Builder> getWebAclRequest) default GetWebAclResponse
getWebACL
(GetWebAclRequest getWebAclRequest) default GetWebAclForResourceResponse
getWebACLForResource
(Consumer<GetWebAclForResourceRequest.Builder> getWebAclForResourceRequest) default GetWebAclForResourceResponse
getWebACLForResource
(GetWebAclForResourceRequest getWebAclForResourceRequest) default GetXssMatchSetResponse
getXssMatchSet
(Consumer<GetXssMatchSetRequest.Builder> getXssMatchSetRequest) default GetXssMatchSetResponse
getXssMatchSet
(GetXssMatchSetRequest getXssMatchSetRequest) listActivatedRulesInRuleGroup
(Consumer<ListActivatedRulesInRuleGroupRequest.Builder> listActivatedRulesInRuleGroupRequest) listActivatedRulesInRuleGroup
(ListActivatedRulesInRuleGroupRequest listActivatedRulesInRuleGroupRequest) default ListByteMatchSetsResponse
default ListByteMatchSetsResponse
listByteMatchSets
(Consumer<ListByteMatchSetsRequest.Builder> listByteMatchSetsRequest) default ListByteMatchSetsResponse
listByteMatchSets
(ListByteMatchSetsRequest listByteMatchSetsRequest) default ListGeoMatchSetsResponse
default ListGeoMatchSetsResponse
listGeoMatchSets
(Consumer<ListGeoMatchSetsRequest.Builder> listGeoMatchSetsRequest) default ListGeoMatchSetsResponse
listGeoMatchSets
(ListGeoMatchSetsRequest listGeoMatchSetsRequest) default ListIpSetsResponse
default ListIpSetsResponse
listIPSets
(Consumer<ListIpSetsRequest.Builder> listIpSetsRequest) default ListIpSetsResponse
listIPSets
(ListIpSetsRequest listIpSetsRequest) listLoggingConfigurations
(Consumer<ListLoggingConfigurationsRequest.Builder> listLoggingConfigurationsRequest) listLoggingConfigurations
(ListLoggingConfigurationsRequest listLoggingConfigurationsRequest) default ListRateBasedRulesResponse
default ListRateBasedRulesResponse
listRateBasedRules
(Consumer<ListRateBasedRulesRequest.Builder> listRateBasedRulesRequest) default ListRateBasedRulesResponse
listRateBasedRules
(ListRateBasedRulesRequest listRateBasedRulesRequest) default ListRegexMatchSetsResponse
default ListRegexMatchSetsResponse
listRegexMatchSets
(Consumer<ListRegexMatchSetsRequest.Builder> listRegexMatchSetsRequest) default ListRegexMatchSetsResponse
listRegexMatchSets
(ListRegexMatchSetsRequest listRegexMatchSetsRequest) default ListRegexPatternSetsResponse
default ListRegexPatternSetsResponse
listRegexPatternSets
(Consumer<ListRegexPatternSetsRequest.Builder> listRegexPatternSetsRequest) default ListRegexPatternSetsResponse
listRegexPatternSets
(ListRegexPatternSetsRequest listRegexPatternSetsRequest) default ListResourcesForWebAclResponse
listResourcesForWebACL
(Consumer<ListResourcesForWebAclRequest.Builder> listResourcesForWebAclRequest) default ListResourcesForWebAclResponse
listResourcesForWebACL
(ListResourcesForWebAclRequest listResourcesForWebAclRequest) default ListRuleGroupsResponse
default ListRuleGroupsResponse
listRuleGroups
(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest) default ListRuleGroupsResponse
listRuleGroups
(ListRuleGroupsRequest listRuleGroupsRequest) default ListRulesResponse
default ListRulesResponse
listRules
(Consumer<ListRulesRequest.Builder> listRulesRequest) default ListRulesResponse
listRules
(ListRulesRequest listRulesRequest) default ListSizeConstraintSetsResponse
default ListSizeConstraintSetsResponse
listSizeConstraintSets
(Consumer<ListSizeConstraintSetsRequest.Builder> listSizeConstraintSetsRequest) default ListSizeConstraintSetsResponse
listSizeConstraintSets
(ListSizeConstraintSetsRequest listSizeConstraintSetsRequest) listSqlInjectionMatchSets
(Consumer<ListSqlInjectionMatchSetsRequest.Builder> listSqlInjectionMatchSetsRequest) listSqlInjectionMatchSets
(ListSqlInjectionMatchSetsRequest listSqlInjectionMatchSetsRequest) default ListSubscribedRuleGroupsResponse
default ListSubscribedRuleGroupsResponse
listSubscribedRuleGroups
(Consumer<ListSubscribedRuleGroupsRequest.Builder> listSubscribedRuleGroupsRequest) default ListSubscribedRuleGroupsResponse
listSubscribedRuleGroups
(ListSubscribedRuleGroupsRequest listSubscribedRuleGroupsRequest) default ListTagsForResourceResponse
listTagsForResource
(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) default ListTagsForResourceResponse
listTagsForResource
(ListTagsForResourceRequest listTagsForResourceRequest) default ListWebAcLsResponse
default ListWebAcLsResponse
listWebACLs
(Consumer<ListWebAcLsRequest.Builder> listWebAcLsRequest) default ListWebAcLsResponse
listWebACLs
(ListWebAcLsRequest listWebAcLsRequest) default ListXssMatchSetsResponse
default ListXssMatchSetsResponse
listXssMatchSets
(Consumer<ListXssMatchSetsRequest.Builder> listXssMatchSetsRequest) default ListXssMatchSetsResponse
listXssMatchSets
(ListXssMatchSetsRequest listXssMatchSetsRequest) default PutLoggingConfigurationResponse
putLoggingConfiguration
(Consumer<PutLoggingConfigurationRequest.Builder> putLoggingConfigurationRequest) default PutLoggingConfigurationResponse
putLoggingConfiguration
(PutLoggingConfigurationRequest putLoggingConfigurationRequest) default PutPermissionPolicyResponse
putPermissionPolicy
(Consumer<PutPermissionPolicyRequest.Builder> putPermissionPolicyRequest) default PutPermissionPolicyResponse
putPermissionPolicy
(PutPermissionPolicyRequest putPermissionPolicyRequest) The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfigurationstatic ServiceMetadata
default TagResourceResponse
tagResource
(Consumer<TagResourceRequest.Builder> tagResourceRequest) default TagResourceResponse
tagResource
(TagResourceRequest tagResourceRequest) default UntagResourceResponse
untagResource
(Consumer<UntagResourceRequest.Builder> untagResourceRequest) default UntagResourceResponse
untagResource
(UntagResourceRequest untagResourceRequest) default UpdateByteMatchSetResponse
updateByteMatchSet
(Consumer<UpdateByteMatchSetRequest.Builder> updateByteMatchSetRequest) default UpdateByteMatchSetResponse
updateByteMatchSet
(UpdateByteMatchSetRequest updateByteMatchSetRequest) default UpdateGeoMatchSetResponse
updateGeoMatchSet
(Consumer<UpdateGeoMatchSetRequest.Builder> updateGeoMatchSetRequest) default UpdateGeoMatchSetResponse
updateGeoMatchSet
(UpdateGeoMatchSetRequest updateGeoMatchSetRequest) default UpdateIpSetResponse
updateIPSet
(Consumer<UpdateIpSetRequest.Builder> updateIpSetRequest) default UpdateIpSetResponse
updateIPSet
(UpdateIpSetRequest updateIpSetRequest) default UpdateRateBasedRuleResponse
updateRateBasedRule
(Consumer<UpdateRateBasedRuleRequest.Builder> updateRateBasedRuleRequest) default UpdateRateBasedRuleResponse
updateRateBasedRule
(UpdateRateBasedRuleRequest updateRateBasedRuleRequest) default UpdateRegexMatchSetResponse
updateRegexMatchSet
(Consumer<UpdateRegexMatchSetRequest.Builder> updateRegexMatchSetRequest) default UpdateRegexMatchSetResponse
updateRegexMatchSet
(UpdateRegexMatchSetRequest updateRegexMatchSetRequest) default UpdateRegexPatternSetResponse
updateRegexPatternSet
(Consumer<UpdateRegexPatternSetRequest.Builder> updateRegexPatternSetRequest) default UpdateRegexPatternSetResponse
updateRegexPatternSet
(UpdateRegexPatternSetRequest updateRegexPatternSetRequest) default UpdateRuleResponse
updateRule
(Consumer<UpdateRuleRequest.Builder> updateRuleRequest) default UpdateRuleResponse
updateRule
(UpdateRuleRequest updateRuleRequest) default UpdateRuleGroupResponse
updateRuleGroup
(Consumer<UpdateRuleGroupRequest.Builder> updateRuleGroupRequest) default UpdateRuleGroupResponse
updateRuleGroup
(UpdateRuleGroupRequest updateRuleGroupRequest) default UpdateSizeConstraintSetResponse
updateSizeConstraintSet
(Consumer<UpdateSizeConstraintSetRequest.Builder> updateSizeConstraintSetRequest) default UpdateSizeConstraintSetResponse
updateSizeConstraintSet
(UpdateSizeConstraintSetRequest updateSizeConstraintSetRequest) updateSqlInjectionMatchSet
(Consumer<UpdateSqlInjectionMatchSetRequest.Builder> updateSqlInjectionMatchSetRequest) updateSqlInjectionMatchSet
(UpdateSqlInjectionMatchSetRequest updateSqlInjectionMatchSetRequest) default UpdateWebAclResponse
updateWebACL
(Consumer<UpdateWebAclRequest.Builder> updateWebAclRequest) default UpdateWebAclResponse
updateWebACL
(UpdateWebAclRequest updateWebAclRequest) default UpdateXssMatchSetResponse
updateXssMatchSet
(Consumer<UpdateXssMatchSetRequest.Builder> updateXssMatchSetRequest) default UpdateXssMatchSetResponse
updateXssMatchSet
(UpdateXssMatchSetRequest updateXssMatchSetRequest) Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close
Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName
-
Field Details
-
SERVICE_NAME
- See Also:
-
SERVICE_METADATA_ID
Value for looking up the service's metadata from theServiceMetadataProvider
.- See Also:
-
-
Method Details
-
associateWebACL
default AssociateWebAclResponse associateWebACL(AssociateWebAclRequest associateWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafNonexistentItemException, WafUnavailableEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Associates a web ACL with a resource, either an application load balancer or Amazon API Gateway stage.
- Parameters:
associateWebAclRequest
-- Returns:
- Result of the AssociateWebACL operation returned by the service.
- See Also:
-
associateWebACL
default AssociateWebAclResponse associateWebACL(Consumer<AssociateWebAclRequest.Builder> associateWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafNonexistentItemException, WafUnavailableEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Associates a web ACL with a resource, either an application load balancer or Amazon API Gateway stage.
This is a convenience which creates an instance of the
AssociateWebAclRequest.Builder
avoiding the need to create one manually viaAssociateWebAclRequest.builder()
- Parameters:
associateWebAclRequest
- AConsumer
that will call methods onAssociateWebAclRequest.Builder
to create a request.- Returns:
- Result of the AssociateWebACL operation returned by the service.
- See Also:
-
createByteMatchSet
default CreateByteMatchSetResponse createByteMatchSet(CreateByteMatchSetRequest createByteMatchSetRequest) throws WafDisallowedNameException, WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
ByteMatchSet
. You then use UpdateByteMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of theUser-Agent
header or the query string. For example, you can create aByteMatchSet
that matches any requests withUser-Agent
headers that contain the stringBadBot
. You can then configure AWS WAF to reject those requests.To create and configure a
ByteMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateByteMatchSet
request. -
Submit a
CreateByteMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateByteMatchSet
request. -
Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createByteMatchSetRequest
-- Returns:
- Result of the CreateByteMatchSet operation returned by the service.
- See Also:
-
-
createByteMatchSet
default CreateByteMatchSetResponse createByteMatchSet(Consumer<CreateByteMatchSetRequest.Builder> createByteMatchSetRequest) throws WafDisallowedNameException, WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
ByteMatchSet
. You then use UpdateByteMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of theUser-Agent
header or the query string. For example, you can create aByteMatchSet
that matches any requests withUser-Agent
headers that contain the stringBadBot
. You can then configure AWS WAF to reject those requests.To create and configure a
ByteMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateByteMatchSet
request. -
Submit a
CreateByteMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateByteMatchSet
request. -
Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateByteMatchSetRequest.Builder
avoiding the need to create one manually viaCreateByteMatchSetRequest.builder()
- Parameters:
createByteMatchSetRequest
- AConsumer
that will call methods onCreateByteMatchSetRequest.Builder
to create a request.- Returns:
- Result of the CreateByteMatchSet operation returned by the service.
- See Also:
-
-
createGeoMatchSet
default CreateGeoMatchSetResponse createGeoMatchSet(CreateGeoMatchSetRequest createGeoMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates an GeoMatchSet, which you use to specify which web requests you want to allow or block based on the country that the requests originate from. For example, if you're receiving a lot of requests from one or more countries and you want to block the requests, you can create an
GeoMatchSet
that contains those countries and then configure AWS WAF to block the requests.To create and configure a
GeoMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateGeoMatchSet
request. -
Submit a
CreateGeoMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateGeoMatchSet request. -
Submit an
UpdateGeoMatchSetSet
request to specify the countries that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createGeoMatchSetRequest
-- Returns:
- Result of the CreateGeoMatchSet operation returned by the service.
- See Also:
-
-
createGeoMatchSet
default CreateGeoMatchSetResponse createGeoMatchSet(Consumer<CreateGeoMatchSetRequest.Builder> createGeoMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates an GeoMatchSet, which you use to specify which web requests you want to allow or block based on the country that the requests originate from. For example, if you're receiving a lot of requests from one or more countries and you want to block the requests, you can create an
GeoMatchSet
that contains those countries and then configure AWS WAF to block the requests.To create and configure a
GeoMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateGeoMatchSet
request. -
Submit a
CreateGeoMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateGeoMatchSet request. -
Submit an
UpdateGeoMatchSetSet
request to specify the countries that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateGeoMatchSetRequest.Builder
avoiding the need to create one manually viaCreateGeoMatchSetRequest.builder()
- Parameters:
createGeoMatchSetRequest
- AConsumer
that will call methods onCreateGeoMatchSetRequest.Builder
to create a request.- Returns:
- Result of the CreateGeoMatchSet operation returned by the service.
- See Also:
-
-
createIPSet
default CreateIpSetResponse createIPSet(CreateIpSetRequest createIpSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates an IPSet, which you use to specify which web requests that you want to allow or block based on the IP addresses that the requests originate from. For example, if you're receiving a lot of requests from one or more individual IP addresses or one or more ranges of IP addresses and you want to block the requests, you can create an
IPSet
that contains those IP addresses and then configure AWS WAF to block the requests.To create and configure an
IPSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateIPSet
request. -
Submit a
CreateIPSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateIPSet
request to specify the IP addresses that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createIpSetRequest
-- Returns:
- Result of the CreateIPSet operation returned by the service.
- See Also:
-
-
createIPSet
default CreateIpSetResponse createIPSet(Consumer<CreateIpSetRequest.Builder> createIpSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates an IPSet, which you use to specify which web requests that you want to allow or block based on the IP addresses that the requests originate from. For example, if you're receiving a lot of requests from one or more individual IP addresses or one or more ranges of IP addresses and you want to block the requests, you can create an
IPSet
that contains those IP addresses and then configure AWS WAF to block the requests.To create and configure an
IPSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateIPSet
request. -
Submit a
CreateIPSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateIPSet
request to specify the IP addresses that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateIpSetRequest.Builder
avoiding the need to create one manually viaCreateIpSetRequest.builder()
- Parameters:
createIpSetRequest
- AConsumer
that will call methods onCreateIpSetRequest.Builder
to create a request.- Returns:
- Result of the CreateIPSet operation returned by the service.
- See Also:
-
-
createRateBasedRule
default CreateRateBasedRuleResponse createRateBasedRule(CreateRateBasedRuleRequest createRateBasedRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a RateBasedRule. The
RateBasedRule
contains aRateLimit
, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. TheRateBasedRule
also contains theIPSet
objects,ByteMatchSet
objects, and other predicates that identify the requests that you want to count or block if these requests exceed theRateLimit
.If you add more than one predicate to a
RateBasedRule
, a request not only must exceed theRateLimit
, but it also must match all the conditions to be counted or blocked. For example, suppose you add the following to aRateBasedRule
:-
An
IPSet
that matches the IP address192.0.2.44/32
-
A
ByteMatchSet
that matchesBadBot
in theUser-Agent
header
Further, you specify a
RateLimit
of 1,000.You then add the
RateBasedRule
to aWebACL
and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and theUser-Agent
header in the request must contain the valueBadBot
. Further, requests that match these two conditions must be received at a rate of more than 1,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 1,000 for a five-minute period, AWS WAF no longer blocks the requests.As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a
RateBasedRule
:-
A
ByteMatchSet
withFieldToMatch
ofURI
-
A
PositionalConstraint
ofSTARTS_WITH
-
A
TargetString
oflogin
Further, you specify a
RateLimit
of 1,000.By adding this
RateBasedRule
to aWebACL
, you could limit requests to your login page without affecting the rest of your site.To create and configure a
RateBasedRule
, perform the following steps:-
Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRule
request. -
Submit a
CreateRateBasedRule
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRule request. -
Submit an
UpdateRateBasedRule
request to specify the predicates that you want to include in the rule. -
Create and update a
WebACL
that contains theRateBasedRule
. For more information, see CreateWebACL.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createRateBasedRuleRequest
-- Returns:
- Result of the CreateRateBasedRule operation returned by the service.
- See Also:
-
-
createRateBasedRule
default CreateRateBasedRuleResponse createRateBasedRule(Consumer<CreateRateBasedRuleRequest.Builder> createRateBasedRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a RateBasedRule. The
RateBasedRule
contains aRateLimit
, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. TheRateBasedRule
also contains theIPSet
objects,ByteMatchSet
objects, and other predicates that identify the requests that you want to count or block if these requests exceed theRateLimit
.If you add more than one predicate to a
RateBasedRule
, a request not only must exceed theRateLimit
, but it also must match all the conditions to be counted or blocked. For example, suppose you add the following to aRateBasedRule
:-
An
IPSet
that matches the IP address192.0.2.44/32
-
A
ByteMatchSet
that matchesBadBot
in theUser-Agent
header
Further, you specify a
RateLimit
of 1,000.You then add the
RateBasedRule
to aWebACL
and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and theUser-Agent
header in the request must contain the valueBadBot
. Further, requests that match these two conditions must be received at a rate of more than 1,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 1,000 for a five-minute period, AWS WAF no longer blocks the requests.As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a
RateBasedRule
:-
A
ByteMatchSet
withFieldToMatch
ofURI
-
A
PositionalConstraint
ofSTARTS_WITH
-
A
TargetString
oflogin
Further, you specify a
RateLimit
of 1,000.By adding this
RateBasedRule
to aWebACL
, you could limit requests to your login page without affecting the rest of your site.To create and configure a
RateBasedRule
, perform the following steps:-
Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRule
request. -
Submit a
CreateRateBasedRule
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRule request. -
Submit an
UpdateRateBasedRule
request to specify the predicates that you want to include in the rule. -
Create and update a
WebACL
that contains theRateBasedRule
. For more information, see CreateWebACL.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateRateBasedRuleRequest.Builder
avoiding the need to create one manually viaCreateRateBasedRuleRequest.builder()
- Parameters:
createRateBasedRuleRequest
- AConsumer
that will call methods onCreateRateBasedRuleRequest.Builder
to create a request.- Returns:
- Result of the CreateRateBasedRule operation returned by the service.
- See Also:
-
-
createRegexMatchSet
default CreateRegexMatchSetResponse createRegexMatchSet(CreateRegexMatchSetRequest createRegexMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a RegexMatchSet. You then use UpdateRegexMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the
User-Agent
header or the query string. For example, you can create aRegexMatchSet
that contains aRegexMatchTuple
that looks for any requests withUser-Agent
headers that match aRegexPatternSet
with patternB[a@]dB[o0]t
. You can then configure AWS WAF to reject those requests.To create and configure a
RegexMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRegexMatchSet
request. -
Submit a
CreateRegexMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateRegexMatchSet
request. -
Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value, using a
RegexPatternSet
, that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createRegexMatchSetRequest
-- Returns:
- Result of the CreateRegexMatchSet operation returned by the service.
- See Also:
-
-
createRegexMatchSet
default CreateRegexMatchSetResponse createRegexMatchSet(Consumer<CreateRegexMatchSetRequest.Builder> createRegexMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a RegexMatchSet. You then use UpdateRegexMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the
User-Agent
header or the query string. For example, you can create aRegexMatchSet
that contains aRegexMatchTuple
that looks for any requests withUser-Agent
headers that match aRegexPatternSet
with patternB[a@]dB[o0]t
. You can then configure AWS WAF to reject those requests.To create and configure a
RegexMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRegexMatchSet
request. -
Submit a
CreateRegexMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateRegexMatchSet
request. -
Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value, using a
RegexPatternSet
, that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateRegexMatchSetRequest.Builder
avoiding the need to create one manually viaCreateRegexMatchSetRequest.builder()
- Parameters:
createRegexMatchSetRequest
- AConsumer
that will call methods onCreateRegexMatchSetRequest.Builder
to create a request.- Returns:
- Result of the CreateRegexMatchSet operation returned by the service.
- See Also:
-
-
createRegexPatternSet
default CreateRegexPatternSetResponse createRegexPatternSet(CreateRegexPatternSetRequest createRegexPatternSetRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
RegexPatternSet
. You then use UpdateRegexPatternSet to specify the regular expression (regex) pattern that you want AWS WAF to search for, such asB[a@]dB[o0]t
. You can then configure AWS WAF to reject those requests.To create and configure a
RegexPatternSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRegexPatternSet
request. -
Submit a
CreateRegexPatternSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateRegexPatternSet
request. -
Submit an UpdateRegexPatternSet request to specify the string that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createRegexPatternSetRequest
-- Returns:
- Result of the CreateRegexPatternSet operation returned by the service.
- See Also:
-
-
createRegexPatternSet
default CreateRegexPatternSetResponse createRegexPatternSet(Consumer<CreateRegexPatternSetRequest.Builder> createRegexPatternSetRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
RegexPatternSet
. You then use UpdateRegexPatternSet to specify the regular expression (regex) pattern that you want AWS WAF to search for, such asB[a@]dB[o0]t
. You can then configure AWS WAF to reject those requests.To create and configure a
RegexPatternSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRegexPatternSet
request. -
Submit a
CreateRegexPatternSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateRegexPatternSet
request. -
Submit an UpdateRegexPatternSet request to specify the string that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateRegexPatternSetRequest.Builder
avoiding the need to create one manually viaCreateRegexPatternSetRequest.builder()
- Parameters:
createRegexPatternSetRequest
- AConsumer
that will call methods onCreateRegexPatternSetRequest.Builder
to create a request.- Returns:
- Result of the CreateRegexPatternSet operation returned by the service.
- See Also:
-
-
createRule
default CreateRuleResponse createRule(CreateRuleRequest createRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
Rule
, which contains theIPSet
objects,ByteMatchSet
objects, and other predicates that identify the requests that you want to block. If you add more than one predicate to aRule
, a request must match all of the specifications to be allowed or blocked. For example, suppose that you add the following to aRule
:-
An
IPSet
that matches the IP address192.0.2.44/32
-
A
ByteMatchSet
that matchesBadBot
in theUser-Agent
header
You then add the
Rule
to aWebACL
and specify that you want to blocks requests that satisfy theRule
. For a request to be blocked, it must come from the IP address 192.0.2.44 and theUser-Agent
header in the request must contain the valueBadBot
.To create and configure a
Rule
, perform the following steps:-
Create and update the predicates that you want to include in the
Rule
. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRule
request. -
Submit a
CreateRule
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRule request. -
Submit an
UpdateRule
request to specify the predicates that you want to include in theRule
. -
Create and update a
WebACL
that contains theRule
. For more information, see CreateWebACL.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createRuleRequest
-- Returns:
- Result of the CreateRule operation returned by the service.
- See Also:
-
-
createRule
default CreateRuleResponse createRule(Consumer<CreateRuleRequest.Builder> createRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
Rule
, which contains theIPSet
objects,ByteMatchSet
objects, and other predicates that identify the requests that you want to block. If you add more than one predicate to aRule
, a request must match all of the specifications to be allowed or blocked. For example, suppose that you add the following to aRule
:-
An
IPSet
that matches the IP address192.0.2.44/32
-
A
ByteMatchSet
that matchesBadBot
in theUser-Agent
header
You then add the
Rule
to aWebACL
and specify that you want to blocks requests that satisfy theRule
. For a request to be blocked, it must come from the IP address 192.0.2.44 and theUser-Agent
header in the request must contain the valueBadBot
.To create and configure a
Rule
, perform the following steps:-
Create and update the predicates that you want to include in the
Rule
. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateRule
request. -
Submit a
CreateRule
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRule request. -
Submit an
UpdateRule
request to specify the predicates that you want to include in theRule
. -
Create and update a
WebACL
that contains theRule
. For more information, see CreateWebACL.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateRuleRequest.Builder
avoiding the need to create one manually viaCreateRuleRequest.builder()
- Parameters:
createRuleRequest
- AConsumer
that will call methods onCreateRuleRequest.Builder
to create a request.- Returns:
- Result of the CreateRule operation returned by the service.
- See Also:
-
-
createRuleGroup
default CreateRuleGroupResponse createRuleGroup(CreateRuleGroupRequest createRuleGroupRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
RuleGroup
. A rule group is a collection of predefined rules that you add to a web ACL. You use UpdateRuleGroup to add rules to the rule group.Rule groups are subject to the following limits:
-
Three rule groups per account. You can request an increase to this limit by contacting customer support.
-
One rule group per web ACL.
-
Ten rules per rule group.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createRuleGroupRequest
-- Returns:
- Result of the CreateRuleGroup operation returned by the service.
- See Also:
-
-
createRuleGroup
default CreateRuleGroupResponse createRuleGroup(Consumer<CreateRuleGroupRequest.Builder> createRuleGroupRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
RuleGroup
. A rule group is a collection of predefined rules that you add to a web ACL. You use UpdateRuleGroup to add rules to the rule group.Rule groups are subject to the following limits:
-
Three rule groups per account. You can request an increase to this limit by contacting customer support.
-
One rule group per web ACL.
-
Ten rules per rule group.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateRuleGroupRequest.Builder
avoiding the need to create one manually viaCreateRuleGroupRequest.builder()
- Parameters:
createRuleGroupRequest
- AConsumer
that will call methods onCreateRuleGroupRequest.Builder
to create a request.- Returns:
- Result of the CreateRuleGroup operation returned by the service.
- See Also:
-
-
createSizeConstraintSet
default CreateSizeConstraintSetResponse createSizeConstraintSet(CreateSizeConstraintSetRequest createSizeConstraintSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
SizeConstraintSet
. You then use UpdateSizeConstraintSet to identify the part of a web request that you want AWS WAF to check for length, such as the length of theUser-Agent
header or the length of the query string. For example, you can create aSizeConstraintSet
that matches any requests that have a query string that is longer than 100 bytes. You can then configure AWS WAF to reject those requests.To create and configure a
SizeConstraintSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateSizeConstraintSet
request. -
Submit a
CreateSizeConstraintSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateSizeConstraintSet
request. -
Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createSizeConstraintSetRequest
-- Returns:
- Result of the CreateSizeConstraintSet operation returned by the service.
- See Also:
-
-
createSizeConstraintSet
default CreateSizeConstraintSetResponse createSizeConstraintSet(Consumer<CreateSizeConstraintSetRequest.Builder> createSizeConstraintSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
SizeConstraintSet
. You then use UpdateSizeConstraintSet to identify the part of a web request that you want AWS WAF to check for length, such as the length of theUser-Agent
header or the length of the query string. For example, you can create aSizeConstraintSet
that matches any requests that have a query string that is longer than 100 bytes. You can then configure AWS WAF to reject those requests.To create and configure a
SizeConstraintSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateSizeConstraintSet
request. -
Submit a
CreateSizeConstraintSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of anUpdateSizeConstraintSet
request. -
Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateSizeConstraintSetRequest.Builder
avoiding the need to create one manually viaCreateSizeConstraintSetRequest.builder()
- Parameters:
createSizeConstraintSetRequest
- AConsumer
that will call methods onCreateSizeConstraintSetRequest.Builder
to create a request.- Returns:
- Result of the CreateSizeConstraintSet operation returned by the service.
- See Also:
-
-
createSqlInjectionMatchSet
default CreateSqlInjectionMatchSetResponse createSqlInjectionMatchSet(CreateSqlInjectionMatchSetRequest createSqlInjectionMatchSetRequest) throws WafDisallowedNameException, WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a SqlInjectionMatchSet, which you use to allow, block, or count requests that contain snippets of SQL code in a specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings.
To create and configure a
SqlInjectionMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateSqlInjectionMatchSet
request. -
Submit a
CreateSqlInjectionMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateSqlInjectionMatchSet request. -
Submit an UpdateSqlInjectionMatchSet request to specify the parts of web requests in which you want to allow, block, or count malicious SQL code.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createSqlInjectionMatchSetRequest
- A request to create a SqlInjectionMatchSet.- Returns:
- Result of the CreateSqlInjectionMatchSet operation returned by the service.
- See Also:
-
-
createSqlInjectionMatchSet
default CreateSqlInjectionMatchSetResponse createSqlInjectionMatchSet(Consumer<CreateSqlInjectionMatchSetRequest.Builder> createSqlInjectionMatchSetRequest) throws WafDisallowedNameException, WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a SqlInjectionMatchSet, which you use to allow, block, or count requests that contain snippets of SQL code in a specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings.
To create and configure a
SqlInjectionMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateSqlInjectionMatchSet
request. -
Submit a
CreateSqlInjectionMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateSqlInjectionMatchSet request. -
Submit an UpdateSqlInjectionMatchSet request to specify the parts of web requests in which you want to allow, block, or count malicious SQL code.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateSqlInjectionMatchSetRequest.Builder
avoiding the need to create one manually viaCreateSqlInjectionMatchSetRequest.builder()
- Parameters:
createSqlInjectionMatchSetRequest
- AConsumer
that will call methods onCreateSqlInjectionMatchSetRequest.Builder
to create a request. A request to create a SqlInjectionMatchSet.- Returns:
- Result of the CreateSqlInjectionMatchSet operation returned by the service.
- See Also:
-
-
createWebACL
default CreateWebAclResponse createWebACL(CreateWebAclRequest createWebAclRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
WebACL
, which contains theRules
that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluatesRules
in order based on the value ofPriority
for eachRule
.You also specify a default action, either
ALLOW
orBLOCK
. If a web request doesn't match any of theRules
in aWebACL
, AWS WAF responds to the request with the default action.To create and configure a
WebACL
, perform the following steps:-
Create and update the
ByteMatchSet
objects and other predicates that you want to include inRules
. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. -
Create and update the
Rules
that you want to include in theWebACL
. For more information, see CreateRule and UpdateRule. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateWebACL
request. -
Submit a
CreateWebACL
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateWebACL request. -
Submit an UpdateWebACL request to specify the
Rules
that you want to include in theWebACL
, to specify the default action, and to associate theWebACL
with a CloudFront distribution.
For more information about how to use the AWS WAF API, see the AWS WAF Developer Guide.
- Parameters:
createWebAclRequest
-- Returns:
- Result of the CreateWebACL operation returned by the service.
- See Also:
-
-
createWebACL
default CreateWebAclResponse createWebACL(Consumer<CreateWebAclRequest.Builder> createWebAclRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafDisallowedNameException, WafInvalidParameterException, WafLimitsExceededException, WafTagOperationException, WafTagOperationInternalErrorException, WafBadRequestException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates a
WebACL
, which contains theRules
that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluatesRules
in order based on the value ofPriority
for eachRule
.You also specify a default action, either
ALLOW
orBLOCK
. If a web request doesn't match any of theRules
in aWebACL
, AWS WAF responds to the request with the default action.To create and configure a
WebACL
, perform the following steps:-
Create and update the
ByteMatchSet
objects and other predicates that you want to include inRules
. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. -
Create and update the
Rules
that you want to include in theWebACL
. For more information, see CreateRule and UpdateRule. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateWebACL
request. -
Submit a
CreateWebACL
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateWebACL request. -
Submit an UpdateWebACL request to specify the
Rules
that you want to include in theWebACL
, to specify the default action, and to associate theWebACL
with a CloudFront distribution.
For more information about how to use the AWS WAF API, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateWebAclRequest.Builder
avoiding the need to create one manually viaCreateWebAclRequest.builder()
- Parameters:
createWebAclRequest
- AConsumer
that will call methods onCreateWebAclRequest.Builder
to create a request.- Returns:
- Result of the CreateWebACL operation returned by the service.
- See Also:
-
-
createWebACLMigrationStack
default CreateWebAclMigrationStackResponse createWebACLMigrationStack(CreateWebAclMigrationStackRequest createWebAclMigrationStackRequest) throws WafInternalErrorException, WafInvalidParameterException, WafInvalidOperationException, WafNonexistentItemException, WafEntityMigrationException, AwsServiceException, SdkClientException, WafException Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket. Then, in CloudFormation, you create a stack from the template, to create the web ACL and its resources in AWS WAFV2. Use this to migrate your AWS WAF Classic web ACL to the latest version of AWS WAF.
This is part of a larger migration procedure for web ACLs from AWS WAF Classic to the latest version of AWS WAF. For the full procedure, including caveats and manual steps to complete the migration and switch over to the new web ACL, see Migrating your AWS WAF Classic resources to AWS WAF in the AWS WAF Developer Guide.
- Parameters:
createWebAclMigrationStackRequest
-- Returns:
- Result of the CreateWebACLMigrationStack operation returned by the service.
- See Also:
-
createWebACLMigrationStack
default CreateWebAclMigrationStackResponse createWebACLMigrationStack(Consumer<CreateWebAclMigrationStackRequest.Builder> createWebAclMigrationStackRequest) throws WafInternalErrorException, WafInvalidParameterException, WafInvalidOperationException, WafNonexistentItemException, WafEntityMigrationException, AwsServiceException, SdkClientException, WafException Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket. Then, in CloudFormation, you create a stack from the template, to create the web ACL and its resources in AWS WAFV2. Use this to migrate your AWS WAF Classic web ACL to the latest version of AWS WAF.
This is part of a larger migration procedure for web ACLs from AWS WAF Classic to the latest version of AWS WAF. For the full procedure, including caveats and manual steps to complete the migration and switch over to the new web ACL, see Migrating your AWS WAF Classic resources to AWS WAF in the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateWebAclMigrationStackRequest.Builder
avoiding the need to create one manually viaCreateWebAclMigrationStackRequest.builder()
- Parameters:
createWebAclMigrationStackRequest
- AConsumer
that will call methods onCreateWebAclMigrationStackRequest.Builder
to create a request.- Returns:
- Result of the CreateWebACLMigrationStack operation returned by the service.
- See Also:
-
createXssMatchSet
default CreateXssMatchSetResponse createXssMatchSet(CreateXssMatchSetRequest createXssMatchSetRequest) throws WafDisallowedNameException, WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates an XssMatchSet, which you use to allow, block, or count requests that contain cross-site scripting attacks in the specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings.
To create and configure an
XssMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateXssMatchSet
request. -
Submit a
CreateXssMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateXssMatchSet request. -
Submit an UpdateXssMatchSet request to specify the parts of web requests in which you want to allow, block, or count cross-site scripting attacks.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
createXssMatchSetRequest
- A request to create an XssMatchSet.- Returns:
- Result of the CreateXssMatchSet operation returned by the service.
- See Also:
-
-
createXssMatchSet
default CreateXssMatchSetResponse createXssMatchSet(Consumer<CreateXssMatchSetRequest.Builder> createXssMatchSetRequest) throws WafDisallowedNameException, WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Creates an XssMatchSet, which you use to allow, block, or count requests that contain cross-site scripting attacks in the specified part of web requests. AWS WAF searches for character sequences that are likely to be malicious strings.
To create and configure an
XssMatchSet
, perform the following steps:-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aCreateXssMatchSet
request. -
Submit a
CreateXssMatchSet
request. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateXssMatchSet request. -
Submit an UpdateXssMatchSet request to specify the parts of web requests in which you want to allow, block, or count cross-site scripting attacks.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
CreateXssMatchSetRequest.Builder
avoiding the need to create one manually viaCreateXssMatchSetRequest.builder()
- Parameters:
createXssMatchSetRequest
- AConsumer
that will call methods onCreateXssMatchSetRequest.Builder
to create a request. A request to create an XssMatchSet.- Returns:
- Result of the CreateXssMatchSet operation returned by the service.
- See Also:
-
-
deleteByteMatchSet
default DeleteByteMatchSetResponse deleteByteMatchSet(DeleteByteMatchSetRequest deleteByteMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a ByteMatchSet. You can't delete a
ByteMatchSet
if it's still used in anyRules
or if it still includes any ByteMatchTuple objects (any filters).If you just want to remove a
ByteMatchSet
from aRule
, use UpdateRule.To permanently delete a
ByteMatchSet
, perform the following steps:-
Update the
ByteMatchSet
to remove filters, if any. For more information, see UpdateByteMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteByteMatchSet
request. -
Submit a
DeleteByteMatchSet
request.
- Parameters:
deleteByteMatchSetRequest
-- Returns:
- Result of the DeleteByteMatchSet operation returned by the service.
- See Also:
-
-
deleteByteMatchSet
default DeleteByteMatchSetResponse deleteByteMatchSet(Consumer<DeleteByteMatchSetRequest.Builder> deleteByteMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a ByteMatchSet. You can't delete a
ByteMatchSet
if it's still used in anyRules
or if it still includes any ByteMatchTuple objects (any filters).If you just want to remove a
ByteMatchSet
from aRule
, use UpdateRule.To permanently delete a
ByteMatchSet
, perform the following steps:-
Update the
ByteMatchSet
to remove filters, if any. For more information, see UpdateByteMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteByteMatchSet
request. -
Submit a
DeleteByteMatchSet
request.
This is a convenience which creates an instance of the
DeleteByteMatchSetRequest.Builder
avoiding the need to create one manually viaDeleteByteMatchSetRequest.builder()
- Parameters:
deleteByteMatchSetRequest
- AConsumer
that will call methods onDeleteByteMatchSetRequest.Builder
to create a request.- Returns:
- Result of the DeleteByteMatchSet operation returned by the service.
- See Also:
-
-
deleteGeoMatchSet
default DeleteGeoMatchSetResponse deleteGeoMatchSet(DeleteGeoMatchSetRequest deleteGeoMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a GeoMatchSet. You can't delete a
GeoMatchSet
if it's still used in anyRules
or if it still includes any countries.If you just want to remove a
GeoMatchSet
from aRule
, use UpdateRule.To permanently delete a
GeoMatchSet
from AWS WAF, perform the following steps:-
Update the
GeoMatchSet
to remove any countries. For more information, see UpdateGeoMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteGeoMatchSet
request. -
Submit a
DeleteGeoMatchSet
request.
- Parameters:
deleteGeoMatchSetRequest
-- Returns:
- Result of the DeleteGeoMatchSet operation returned by the service.
- See Also:
-
-
deleteGeoMatchSet
default DeleteGeoMatchSetResponse deleteGeoMatchSet(Consumer<DeleteGeoMatchSetRequest.Builder> deleteGeoMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a GeoMatchSet. You can't delete a
GeoMatchSet
if it's still used in anyRules
or if it still includes any countries.If you just want to remove a
GeoMatchSet
from aRule
, use UpdateRule.To permanently delete a
GeoMatchSet
from AWS WAF, perform the following steps:-
Update the
GeoMatchSet
to remove any countries. For more information, see UpdateGeoMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteGeoMatchSet
request. -
Submit a
DeleteGeoMatchSet
request.
This is a convenience which creates an instance of the
DeleteGeoMatchSetRequest.Builder
avoiding the need to create one manually viaDeleteGeoMatchSetRequest.builder()
- Parameters:
deleteGeoMatchSetRequest
- AConsumer
that will call methods onDeleteGeoMatchSetRequest.Builder
to create a request.- Returns:
- Result of the DeleteGeoMatchSet operation returned by the service.
- See Also:
-
-
deleteIPSet
default DeleteIpSetResponse deleteIPSet(DeleteIpSetRequest deleteIpSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes an IPSet. You can't delete an
IPSet
if it's still used in anyRules
or if it still includes any IP addresses.If you just want to remove an
IPSet
from aRule
, use UpdateRule.To permanently delete an
IPSet
from AWS WAF, perform the following steps:-
Update the
IPSet
to remove IP address ranges, if any. For more information, see UpdateIPSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteIPSet
request. -
Submit a
DeleteIPSet
request.
- Parameters:
deleteIpSetRequest
-- Returns:
- Result of the DeleteIPSet operation returned by the service.
- See Also:
-
-
deleteIPSet
default DeleteIpSetResponse deleteIPSet(Consumer<DeleteIpSetRequest.Builder> deleteIpSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes an IPSet. You can't delete an
IPSet
if it's still used in anyRules
or if it still includes any IP addresses.If you just want to remove an
IPSet
from aRule
, use UpdateRule.To permanently delete an
IPSet
from AWS WAF, perform the following steps:-
Update the
IPSet
to remove IP address ranges, if any. For more information, see UpdateIPSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteIPSet
request. -
Submit a
DeleteIPSet
request.
This is a convenience which creates an instance of the
DeleteIpSetRequest.Builder
avoiding the need to create one manually viaDeleteIpSetRequest.builder()
- Parameters:
deleteIpSetRequest
- AConsumer
that will call methods onDeleteIpSetRequest.Builder
to create a request.- Returns:
- Result of the DeleteIPSet operation returned by the service.
- See Also:
-
-
deleteLoggingConfiguration
default DeleteLoggingConfigurationResponse deleteLoggingConfiguration(DeleteLoggingConfigurationRequest deleteLoggingConfigurationRequest) throws WafInternalErrorException, WafNonexistentItemException, WafStaleDataException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes the LoggingConfiguration from the specified web ACL.
- Parameters:
deleteLoggingConfigurationRequest
-- Returns:
- Result of the DeleteLoggingConfiguration operation returned by the service.
- See Also:
-
deleteLoggingConfiguration
default DeleteLoggingConfigurationResponse deleteLoggingConfiguration(Consumer<DeleteLoggingConfigurationRequest.Builder> deleteLoggingConfigurationRequest) throws WafInternalErrorException, WafNonexistentItemException, WafStaleDataException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes the LoggingConfiguration from the specified web ACL.
This is a convenience which creates an instance of the
DeleteLoggingConfigurationRequest.Builder
avoiding the need to create one manually viaDeleteLoggingConfigurationRequest.builder()
- Parameters:
deleteLoggingConfigurationRequest
- AConsumer
that will call methods onDeleteLoggingConfigurationRequest.Builder
to create a request.- Returns:
- Result of the DeleteLoggingConfiguration operation returned by the service.
- See Also:
-
deletePermissionPolicy
default DeletePermissionPolicyResponse deletePermissionPolicy(DeletePermissionPolicyRequest deletePermissionPolicyRequest) throws WafInternalErrorException, WafStaleDataException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes an IAM policy from the specified RuleGroup.
The user making the request must be the owner of the RuleGroup.
- Parameters:
deletePermissionPolicyRequest
-- Returns:
- Result of the DeletePermissionPolicy operation returned by the service.
- See Also:
-
deletePermissionPolicy
default DeletePermissionPolicyResponse deletePermissionPolicy(Consumer<DeletePermissionPolicyRequest.Builder> deletePermissionPolicyRequest) throws WafInternalErrorException, WafStaleDataException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes an IAM policy from the specified RuleGroup.
The user making the request must be the owner of the RuleGroup.
This is a convenience which creates an instance of the
DeletePermissionPolicyRequest.Builder
avoiding the need to create one manually viaDeletePermissionPolicyRequest.builder()
- Parameters:
deletePermissionPolicyRequest
- AConsumer
that will call methods onDeletePermissionPolicyRequest.Builder
to create a request.- Returns:
- Result of the DeletePermissionPolicy operation returned by the service.
- See Also:
-
deleteRateBasedRule
default DeleteRateBasedRuleResponse deleteRateBasedRule(DeleteRateBasedRuleRequest deleteRateBasedRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RateBasedRule. You can't delete a rule if it's still used in any
WebACL
objects or if it still includes any predicates, such asByteMatchSet
objects.If you just want to remove a rule from a
WebACL
, use UpdateWebACL.To permanently delete a
RateBasedRule
from AWS WAF, perform the following steps:-
Update the
RateBasedRule
to remove predicates, if any. For more information, see UpdateRateBasedRule. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRateBasedRule
request. -
Submit a
DeleteRateBasedRule
request.
- Parameters:
deleteRateBasedRuleRequest
-- Returns:
- Result of the DeleteRateBasedRule operation returned by the service.
- See Also:
-
-
deleteRateBasedRule
default DeleteRateBasedRuleResponse deleteRateBasedRule(Consumer<DeleteRateBasedRuleRequest.Builder> deleteRateBasedRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RateBasedRule. You can't delete a rule if it's still used in any
WebACL
objects or if it still includes any predicates, such asByteMatchSet
objects.If you just want to remove a rule from a
WebACL
, use UpdateWebACL.To permanently delete a
RateBasedRule
from AWS WAF, perform the following steps:-
Update the
RateBasedRule
to remove predicates, if any. For more information, see UpdateRateBasedRule. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRateBasedRule
request. -
Submit a
DeleteRateBasedRule
request.
This is a convenience which creates an instance of the
DeleteRateBasedRuleRequest.Builder
avoiding the need to create one manually viaDeleteRateBasedRuleRequest.builder()
- Parameters:
deleteRateBasedRuleRequest
- AConsumer
that will call methods onDeleteRateBasedRuleRequest.Builder
to create a request.- Returns:
- Result of the DeleteRateBasedRule operation returned by the service.
- See Also:
-
-
deleteRegexMatchSet
default DeleteRegexMatchSetResponse deleteRegexMatchSet(DeleteRegexMatchSetRequest deleteRegexMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RegexMatchSet. You can't delete a
RegexMatchSet
if it's still used in anyRules
or if it still includes anyRegexMatchTuples
objects (any filters).If you just want to remove a
RegexMatchSet
from aRule
, use UpdateRule.To permanently delete a
RegexMatchSet
, perform the following steps:-
Update the
RegexMatchSet
to remove filters, if any. For more information, see UpdateRegexMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRegexMatchSet
request. -
Submit a
DeleteRegexMatchSet
request.
- Parameters:
deleteRegexMatchSetRequest
-- Returns:
- Result of the DeleteRegexMatchSet operation returned by the service.
- See Also:
-
-
deleteRegexMatchSet
default DeleteRegexMatchSetResponse deleteRegexMatchSet(Consumer<DeleteRegexMatchSetRequest.Builder> deleteRegexMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RegexMatchSet. You can't delete a
RegexMatchSet
if it's still used in anyRules
or if it still includes anyRegexMatchTuples
objects (any filters).If you just want to remove a
RegexMatchSet
from aRule
, use UpdateRule.To permanently delete a
RegexMatchSet
, perform the following steps:-
Update the
RegexMatchSet
to remove filters, if any. For more information, see UpdateRegexMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRegexMatchSet
request. -
Submit a
DeleteRegexMatchSet
request.
This is a convenience which creates an instance of the
DeleteRegexMatchSetRequest.Builder
avoiding the need to create one manually viaDeleteRegexMatchSetRequest.builder()
- Parameters:
deleteRegexMatchSetRequest
- AConsumer
that will call methods onDeleteRegexMatchSetRequest.Builder
to create a request.- Returns:
- Result of the DeleteRegexMatchSet operation returned by the service.
- See Also:
-
-
deleteRegexPatternSet
default DeleteRegexPatternSetResponse deleteRegexPatternSet(DeleteRegexPatternSetRequest deleteRegexPatternSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RegexPatternSet. You can't delete a
RegexPatternSet
if it's still used in anyRegexMatchSet
or if theRegexPatternSet
is not empty.- Parameters:
deleteRegexPatternSetRequest
-- Returns:
- Result of the DeleteRegexPatternSet operation returned by the service.
- See Also:
-
deleteRegexPatternSet
default DeleteRegexPatternSetResponse deleteRegexPatternSet(Consumer<DeleteRegexPatternSetRequest.Builder> deleteRegexPatternSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RegexPatternSet. You can't delete a
RegexPatternSet
if it's still used in anyRegexMatchSet
or if theRegexPatternSet
is not empty.
This is a convenience which creates an instance of the
DeleteRegexPatternSetRequest.Builder
avoiding the need to create one manually viaDeleteRegexPatternSetRequest.builder()
- Parameters:
deleteRegexPatternSetRequest
- AConsumer
that will call methods onDeleteRegexPatternSetRequest.Builder
to create a request.- Returns:
- Result of the DeleteRegexPatternSet operation returned by the service.
- See Also:
-
deleteRule
default DeleteRuleResponse deleteRule(DeleteRuleRequest deleteRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a Rule. You can't delete a
Rule
if it's still used in anyWebACL
objects or if it still includes any predicates, such asByteMatchSet
objects.If you just want to remove a
Rule
from aWebACL
, use UpdateWebACL.To permanently delete a
Rule
from AWS WAF, perform the following steps:-
Update the
Rule
to remove predicates, if any. For more information, see UpdateRule. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRule
request. -
Submit a
DeleteRule
request.
- Parameters:
deleteRuleRequest
-- Returns:
- Result of the DeleteRule operation returned by the service.
- See Also:
-
-
deleteRule
default DeleteRuleResponse deleteRule(Consumer<DeleteRuleRequest.Builder> deleteRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a Rule. You can't delete a
Rule
if it's still used in anyWebACL
objects or if it still includes any predicates, such asByteMatchSet
objects.If you just want to remove a
Rule
from aWebACL
, use UpdateWebACL.To permanently delete a
Rule
from AWS WAF, perform the following steps:-
Update the
Rule
to remove predicates, if any. For more information, see UpdateRule. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRule
request. -
Submit a
DeleteRule
request.
This is a convenience which creates an instance of the
DeleteRuleRequest.Builder
avoiding the need to create one manually viaDeleteRuleRequest.builder()
- Parameters:
deleteRuleRequest
- AConsumer
that will call methods onDeleteRuleRequest.Builder
to create a request.- Returns:
- Result of the DeleteRule operation returned by the service.
- See Also:
-
-
deleteRuleGroup
default DeleteRuleGroupResponse deleteRuleGroup(DeleteRuleGroupRequest deleteRuleGroupRequest) throws WafStaleDataException, WafInternalErrorException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafInvalidOperationException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RuleGroup. You can't delete a
RuleGroup
if it's still used in anyWebACL
objects or if it still includes any rules.If you just want to remove a
RuleGroup
from aWebACL
, use UpdateWebACL.To permanently delete a
RuleGroup
from AWS WAF, perform the following steps:-
Update the
RuleGroup
to remove rules, if any. For more information, see UpdateRuleGroup. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRuleGroup
request. -
Submit a
DeleteRuleGroup
request.
- Parameters:
deleteRuleGroupRequest
-- Returns:
- Result of the DeleteRuleGroup operation returned by the service.
- See Also:
-
-
deleteRuleGroup
default DeleteRuleGroupResponse deleteRuleGroup(Consumer<DeleteRuleGroupRequest.Builder> deleteRuleGroupRequest) throws WafStaleDataException, WafInternalErrorException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafInvalidOperationException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a RuleGroup. You can't delete a
RuleGroup
if it's still used in anyWebACL
objects or if it still includes any rules.If you just want to remove a
RuleGroup
from aWebACL
, use UpdateWebACL.To permanently delete a
RuleGroup
from AWS WAF, perform the following steps:-
Update the
RuleGroup
to remove rules, if any. For more information, see UpdateRuleGroup. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteRuleGroup
request. -
Submit a
DeleteRuleGroup
request.
This is a convenience which creates an instance of the
DeleteRuleGroupRequest.Builder
avoiding the need to create one manually viaDeleteRuleGroupRequest.builder()
- Parameters:
deleteRuleGroupRequest
- AConsumer
that will call methods onDeleteRuleGroupRequest.Builder
to create a request.- Returns:
- Result of the DeleteRuleGroup operation returned by the service.
- See Also:
-
-
deleteSizeConstraintSet
default DeleteSizeConstraintSetResponse deleteSizeConstraintSet(DeleteSizeConstraintSetRequest deleteSizeConstraintSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a SizeConstraintSet. You can't delete a
SizeConstraintSet
if it's still used in anyRules
or if it still includes any SizeConstraint objects (any filters).If you just want to remove a
SizeConstraintSet
from aRule
, use UpdateRule.To permanently delete a
SizeConstraintSet
, perform the following steps:-
Update the
SizeConstraintSet
to remove filters, if any. For more information, see UpdateSizeConstraintSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteSizeConstraintSet
request. -
Submit a
DeleteSizeConstraintSet
request.
- Parameters:
deleteSizeConstraintSetRequest
-- Returns:
- Result of the DeleteSizeConstraintSet operation returned by the service.
- See Also:
-
-
deleteSizeConstraintSet
default DeleteSizeConstraintSetResponse deleteSizeConstraintSet(Consumer<DeleteSizeConstraintSetRequest.Builder> deleteSizeConstraintSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a SizeConstraintSet. You can't delete a
SizeConstraintSet
if it's still used in anyRules
or if it still includes any SizeConstraint objects (any filters).If you just want to remove a
SizeConstraintSet
from aRule
, use UpdateRule.To permanently delete a
SizeConstraintSet
, perform the following steps:-
Update the
SizeConstraintSet
to remove filters, if any. For more information, see UpdateSizeConstraintSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteSizeConstraintSet
request. -
Submit a
DeleteSizeConstraintSet
request.
This is a convenience which creates an instance of the
DeleteSizeConstraintSetRequest.Builder
avoiding the need to create one manually viaDeleteSizeConstraintSetRequest.builder()
- Parameters:
deleteSizeConstraintSetRequest
- AConsumer
that will call methods onDeleteSizeConstraintSetRequest.Builder
to create a request.- Returns:
- Result of the DeleteSizeConstraintSet operation returned by the service.
- See Also:
-
-
deleteSqlInjectionMatchSet
default DeleteSqlInjectionMatchSetResponse deleteSqlInjectionMatchSet(DeleteSqlInjectionMatchSetRequest deleteSqlInjectionMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a SqlInjectionMatchSet. You can't delete a
SqlInjectionMatchSet
if it's still used in anyRules
or if it still contains any SqlInjectionMatchTuple objects.If you just want to remove a
SqlInjectionMatchSet
from aRule
, use UpdateRule.To permanently delete a
SqlInjectionMatchSet
from AWS WAF, perform the following steps:-
Update the
SqlInjectionMatchSet
to remove filters, if any. For more information, see UpdateSqlInjectionMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteSqlInjectionMatchSet
request. -
Submit a
DeleteSqlInjectionMatchSet
request.
- Parameters:
deleteSqlInjectionMatchSetRequest
- A request to delete a SqlInjectionMatchSet from AWS WAF.- Returns:
- Result of the DeleteSqlInjectionMatchSet operation returned by the service.
- See Also:
-
-
deleteSqlInjectionMatchSet
default DeleteSqlInjectionMatchSetResponse deleteSqlInjectionMatchSet(Consumer<DeleteSqlInjectionMatchSetRequest.Builder> deleteSqlInjectionMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a SqlInjectionMatchSet. You can't delete a
SqlInjectionMatchSet
if it's still used in anyRules
or if it still contains any SqlInjectionMatchTuple objects.If you just want to remove a
SqlInjectionMatchSet
from aRule
, use UpdateRule.To permanently delete a
SqlInjectionMatchSet
from AWS WAF, perform the following steps:-
Update the
SqlInjectionMatchSet
to remove filters, if any. For more information, see UpdateSqlInjectionMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteSqlInjectionMatchSet
request. -
Submit a
DeleteSqlInjectionMatchSet
request.
This is a convenience which creates an instance of the
DeleteSqlInjectionMatchSetRequest.Builder
avoiding the need to create one manually viaDeleteSqlInjectionMatchSetRequest.builder()
- Parameters:
deleteSqlInjectionMatchSetRequest
- AConsumer
that will call methods onDeleteSqlInjectionMatchSetRequest.Builder
to create a request. A request to delete a SqlInjectionMatchSet from AWS WAF.- Returns:
- Result of the DeleteSqlInjectionMatchSet operation returned by the service.
- See Also:
-
-
deleteWebACL
default DeleteWebAclResponse deleteWebACL(DeleteWebAclRequest deleteWebAclRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a WebACL. You can't delete a
WebACL
if it still contains anyRules
.To delete a
WebACL
, perform the following steps:-
Update the
WebACL
to removeRules
, if any. For more information, see UpdateWebACL. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteWebACL
request. -
Submit a
DeleteWebACL
request.
- Parameters:
deleteWebAclRequest
-- Returns:
- Result of the DeleteWebACL operation returned by the service.
- See Also:
-
-
deleteWebACL
default DeleteWebAclResponse deleteWebACL(Consumer<DeleteWebAclRequest.Builder> deleteWebAclRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafNonEmptyEntityException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes a WebACL. You can't delete a
WebACL
if it still contains anyRules
.To delete a
WebACL
, perform the following steps:-
Update the
WebACL
to removeRules
, if any. For more information, see UpdateWebACL. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteWebACL
request. -
Submit a
DeleteWebACL
request.
This is a convenience which creates an instance of the
DeleteWebAclRequest.Builder
avoiding the need to create one manually viaDeleteWebAclRequest.builder()
- Parameters:
deleteWebAclRequest
- AConsumer
that will call methods onDeleteWebAclRequest.Builder
to create a request.- Returns:
- Result of the DeleteWebACL operation returned by the service.
- See Also:
-
-
deleteXssMatchSet
default DeleteXssMatchSetResponse deleteXssMatchSet(DeleteXssMatchSetRequest deleteXssMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes an XssMatchSet. You can't delete an
XssMatchSet
if it's still used in anyRules
or if it still contains any XssMatchTuple objects.If you just want to remove an
XssMatchSet
from aRule
, use UpdateRule.To permanently delete an
XssMatchSet
from AWS WAF, perform the following steps:-
Update the
XssMatchSet
to remove filters, if any. For more information, see UpdateXssMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteXssMatchSet
request. -
Submit a
DeleteXssMatchSet
request.
- Parameters:
deleteXssMatchSetRequest
- A request to delete an XssMatchSet from AWS WAF.- Returns:
- Result of the DeleteXssMatchSet operation returned by the service.
- See Also:
-
-
deleteXssMatchSet
default DeleteXssMatchSetResponse deleteXssMatchSet(Consumer<DeleteXssMatchSetRequest.Builder> deleteXssMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafReferencedItemException, WafStaleDataException, WafNonEmptyEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Permanently deletes an XssMatchSet. You can't delete an
XssMatchSet
if it's still used in anyRules
or if it still contains any XssMatchTuple objects.If you just want to remove an
XssMatchSet
from aRule
, use UpdateRule.To permanently delete an
XssMatchSet
from AWS WAF, perform the following steps:-
Update the
XssMatchSet
to remove filters, if any. For more information, see UpdateXssMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of aDeleteXssMatchSet
request. -
Submit a
DeleteXssMatchSet
request.
This is a convenience which creates an instance of the
DeleteXssMatchSetRequest.Builder
avoiding the need to create one manually viaDeleteXssMatchSetRequest.builder()
- Parameters:
deleteXssMatchSetRequest
- AConsumer
that will call methods onDeleteXssMatchSetRequest.Builder
to create a request. A request to delete an XssMatchSet from AWS WAF.- Returns:
- Result of the DeleteXssMatchSet operation returned by the service.
- See Also:
-
-
disassociateWebACL
default DisassociateWebAclResponse disassociateWebACL(DisassociateWebAclRequest disassociateWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Removes a web ACL from the specified resource, either an application load balancer or Amazon API Gateway stage.
- Parameters:
disassociateWebAclRequest
-- Returns:
- Result of the DisassociateWebACL operation returned by the service.
- See Also:
-
disassociateWebACL
default DisassociateWebAclResponse disassociateWebACL(Consumer<DisassociateWebAclRequest.Builder> disassociateWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidParameterException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Removes a web ACL from the specified resource, either an application load balancer or Amazon API Gateway stage.
This is a convenience which creates an instance of the
DisassociateWebAclRequest.Builder
avoiding the need to create one manually viaDisassociateWebAclRequest.builder()
- Parameters:
disassociateWebAclRequest
- AConsumer
that will call methods onDisassociateWebAclRequest.Builder
to create a request.- Returns:
- Result of the DisassociateWebACL operation returned by the service.
- See Also:
-
getByteMatchSet
default GetByteMatchSetResponse getByteMatchSet(GetByteMatchSetRequest getByteMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the ByteMatchSet specified by
ByteMatchSetId
.- Parameters:
getByteMatchSetRequest
-- Returns:
- Result of the GetByteMatchSet operation returned by the service.
- See Also:
-
getByteMatchSet
default GetByteMatchSetResponse getByteMatchSet(Consumer<GetByteMatchSetRequest.Builder> getByteMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the ByteMatchSet specified by
ByteMatchSetId
.
This is a convenience which creates an instance of the
GetByteMatchSetRequest.Builder
avoiding the need to create one manually viaGetByteMatchSetRequest.builder()
- Parameters:
getByteMatchSetRequest
- AConsumer
that will call methods onGetByteMatchSetRequest.Builder
to create a request.- Returns:
- Result of the GetByteMatchSet operation returned by the service.
- See Also:
-
getChangeToken
default GetChangeTokenResponse getChangeToken(GetChangeTokenRequest getChangeTokenRequest) throws WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn't submit conflicting requests to AWS WAF.
Each create, update, or delete request must use a unique change token. If your application submits a
GetChangeToken
request and then submits a secondGetChangeToken
request before submitting a create, update, or delete request, the secondGetChangeToken
request returns the same value as the firstGetChangeToken
request.When you use a change token in a create, update, or delete request, the status of the change token changes to
PENDING
, which indicates that AWS WAF is propagating the change to all AWS WAF servers. UseGetChangeTokenStatus
to determine the status of your change token.- Parameters:
getChangeTokenRequest
-- Returns:
- Result of the GetChangeToken operation returned by the service.
- See Also:
-
getChangeToken
default GetChangeTokenResponse getChangeToken(Consumer<GetChangeTokenRequest.Builder> getChangeTokenRequest) throws WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn't submit conflicting requests to AWS WAF.
Each create, update, or delete request must use a unique change token. If your application submits a
GetChangeToken
request and then submits a secondGetChangeToken
request before submitting a create, update, or delete request, the secondGetChangeToken
request returns the same value as the firstGetChangeToken
request.When you use a change token in a create, update, or delete request, the status of the change token changes to
PENDING
, which indicates that AWS WAF is propagating the change to all AWS WAF servers. UseGetChangeTokenStatus
to determine the status of your change token.
This is a convenience which creates an instance of the
GetChangeTokenRequest.Builder
avoiding the need to create one manually viaGetChangeTokenRequest.builder()
- Parameters:
getChangeTokenRequest
- AConsumer
that will call methods onGetChangeTokenRequest.Builder
to create a request.- Returns:
- Result of the GetChangeToken operation returned by the service.
- See Also:
-
getChangeToken
default GetChangeTokenResponse getChangeToken() throws WafInternalErrorException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn't submit conflicting requests to AWS WAF.
Each create, update, or delete request must use a unique change token. If your application submits a
GetChangeToken
request and then submits a secondGetChangeToken
request before submitting a create, update, or delete request, the secondGetChangeToken
request returns the same value as the firstGetChangeToken
request.When you use a change token in a create, update, or delete request, the status of the change token changes to
PENDING
, which indicates that AWS WAF is propagating the change to all AWS WAF servers. UseGetChangeTokenStatus
to determine the status of your change token.- Returns:
- Result of the GetChangeToken operation returned by the service.
- See Also:
-
getChangeTokenStatus
default GetChangeTokenStatusResponse getChangeTokenStatus(GetChangeTokenStatusRequest getChangeTokenStatusRequest) throws WafNonexistentItemException, WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the status of a
ChangeToken
that you got by calling GetChangeToken.ChangeTokenStatus
is one of the following values:-
PROVISIONED
: You requested the change token by callingGetChangeToken
, but you haven't used it yet in a call to create, update, or delete an AWS WAF object. -
PENDING
: AWS WAF is propagating the create, update, or delete request to all AWS WAF servers. -
INSYNC
: Propagation is complete.
- Parameters:
getChangeTokenStatusRequest
-- Returns:
- Result of the GetChangeTokenStatus operation returned by the service.
- See Also:
-
-
getChangeTokenStatus
default GetChangeTokenStatusResponse getChangeTokenStatus(Consumer<GetChangeTokenStatusRequest.Builder> getChangeTokenStatusRequest) throws WafNonexistentItemException, WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the status of a
ChangeToken
that you got by calling GetChangeToken.ChangeTokenStatus
is one of the following values:-
PROVISIONED
: You requested the change token by callingGetChangeToken
, but you haven't used it yet in a call to create, update, or delete an AWS WAF object. -
PENDING
: AWS WAF is propagating the create, update, or delete request to all AWS WAF servers. -
INSYNC
: Propagation is complete.
This is a convenience which creates an instance of the
GetChangeTokenStatusRequest.Builder
avoiding the need to create one manually viaGetChangeTokenStatusRequest.builder()
- Parameters:
getChangeTokenStatusRequest
- AConsumer
that will call methods onGetChangeTokenStatusRequest.Builder
to create a request.- Returns:
- Result of the GetChangeTokenStatus operation returned by the service.
- See Also:
-
-
getGeoMatchSet
default GetGeoMatchSetResponse getGeoMatchSet(GetGeoMatchSetRequest getGeoMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the GeoMatchSet that is specified by
GeoMatchSetId
.- Parameters:
getGeoMatchSetRequest
-- Returns:
- Result of the GetGeoMatchSet operation returned by the service.
- See Also:
-
getGeoMatchSet
default GetGeoMatchSetResponse getGeoMatchSet(Consumer<GetGeoMatchSetRequest.Builder> getGeoMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the GeoMatchSet that is specified by
GeoMatchSetId
.
This is a convenience which creates an instance of the
GetGeoMatchSetRequest.Builder
avoiding the need to create one manually viaGetGeoMatchSetRequest.builder()
- Parameters:
getGeoMatchSetRequest
- AConsumer
that will call methods onGetGeoMatchSetRequest.Builder
to create a request.- Returns:
- Result of the GetGeoMatchSet operation returned by the service.
- See Also:
-
getIPSet
default GetIpSetResponse getIPSet(GetIpSetRequest getIpSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the IPSet that is specified by
IPSetId
.- Parameters:
getIpSetRequest
-- Returns:
- Result of the GetIPSet operation returned by the service.
- See Also:
-
getIPSet
default GetIpSetResponse getIPSet(Consumer<GetIpSetRequest.Builder> getIpSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the IPSet that is specified by
IPSetId
.
This is a convenience which creates an instance of the
GetIpSetRequest.Builder
avoiding the need to create one manually viaGetIpSetRequest.builder()
- Parameters:
getIpSetRequest
- AConsumer
that will call methods onGetIpSetRequest.Builder
to create a request.- Returns:
- Result of the GetIPSet operation returned by the service.
- See Also:
-
getLoggingConfiguration
default GetLoggingConfigurationResponse getLoggingConfiguration(GetLoggingConfigurationRequest getLoggingConfigurationRequest) throws WafInternalErrorException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the LoggingConfiguration for the specified web ACL.
- Parameters:
getLoggingConfigurationRequest
-- Returns:
- Result of the GetLoggingConfiguration operation returned by the service.
- See Also:
-
getLoggingConfiguration
default GetLoggingConfigurationResponse getLoggingConfiguration(Consumer<GetLoggingConfigurationRequest.Builder> getLoggingConfigurationRequest) throws WafInternalErrorException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the LoggingConfiguration for the specified web ACL.
This is a convenience which creates an instance of the
GetLoggingConfigurationRequest.Builder
avoiding the need to create one manually viaGetLoggingConfigurationRequest.builder()
- Parameters:
getLoggingConfigurationRequest
- AConsumer
that will call methods onGetLoggingConfigurationRequest.Builder
to create a request.- Returns:
- Result of the GetLoggingConfiguration operation returned by the service.
- See Also:
-
getPermissionPolicy
default GetPermissionPolicyResponse getPermissionPolicy(GetPermissionPolicyRequest getPermissionPolicyRequest) throws WafInternalErrorException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the IAM policy attached to the RuleGroup.
- Parameters:
getPermissionPolicyRequest
-- Returns:
- Result of the GetPermissionPolicy operation returned by the service.
- See Also:
-
getPermissionPolicy
default GetPermissionPolicyResponse getPermissionPolicy(Consumer<GetPermissionPolicyRequest.Builder> getPermissionPolicyRequest) throws WafInternalErrorException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the IAM policy attached to the RuleGroup.
This is a convenience which creates an instance of the
GetPermissionPolicyRequest.Builder
avoiding the need to create one manually viaGetPermissionPolicyRequest.builder()
- Parameters:
getPermissionPolicyRequest
- AConsumer
that will call methods onGetPermissionPolicyRequest.Builder
to create a request.- Returns:
- Result of the GetPermissionPolicy operation returned by the service.
- See Also:
-
getRateBasedRule
default GetRateBasedRuleResponse getRateBasedRule(GetRateBasedRuleRequest getRateBasedRuleRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RateBasedRule that is specified by the
RuleId
that you included in theGetRateBasedRule
request.- Parameters:
getRateBasedRuleRequest
-- Returns:
- Result of the GetRateBasedRule operation returned by the service.
- See Also:
-
getRateBasedRule
default GetRateBasedRuleResponse getRateBasedRule(Consumer<GetRateBasedRuleRequest.Builder> getRateBasedRuleRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RateBasedRule that is specified by the
RuleId
that you included in theGetRateBasedRule
request.
This is a convenience which creates an instance of the
GetRateBasedRuleRequest.Builder
avoiding the need to create one manually viaGetRateBasedRuleRequest.builder()
- Parameters:
getRateBasedRuleRequest
- AConsumer
that will call methods onGetRateBasedRuleRequest.Builder
to create a request.- Returns:
- Result of the GetRateBasedRule operation returned by the service.
- See Also:
-
getRateBasedRuleManagedKeys
default GetRateBasedRuleManagedKeysResponse getRateBasedRuleManagedKeys(GetRateBasedRuleManagedKeysRequest getRateBasedRuleManagedKeysRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of IP addresses currently being blocked by the RateBasedRule that is specified by the
RuleId
. The maximum number of managed keys that will be blocked is 10,000. If more than 10,000 addresses exceed the rate limit, the 10,000 addresses with the highest rates will be blocked.- Parameters:
getRateBasedRuleManagedKeysRequest
-- Returns:
- Result of the GetRateBasedRuleManagedKeys operation returned by the service.
- See Also:
-
getRateBasedRuleManagedKeys
default GetRateBasedRuleManagedKeysResponse getRateBasedRuleManagedKeys(Consumer<GetRateBasedRuleManagedKeysRequest.Builder> getRateBasedRuleManagedKeysRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of IP addresses currently being blocked by the RateBasedRule that is specified by the
RuleId
. The maximum number of managed keys that will be blocked is 10,000. If more than 10,000 addresses exceed the rate limit, the 10,000 addresses with the highest rates will be blocked.
This is a convenience which creates an instance of the
GetRateBasedRuleManagedKeysRequest.Builder
avoiding the need to create one manually viaGetRateBasedRuleManagedKeysRequest.builder()
- Parameters:
getRateBasedRuleManagedKeysRequest
- AConsumer
that will call methods onGetRateBasedRuleManagedKeysRequest.Builder
to create a request.- Returns:
- Result of the GetRateBasedRuleManagedKeys operation returned by the service.
- See Also:
-
getRegexMatchSet
default GetRegexMatchSetResponse getRegexMatchSet(GetRegexMatchSetRequest getRegexMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RegexMatchSet specified by
RegexMatchSetId
.- Parameters:
getRegexMatchSetRequest
-- Returns:
- Result of the GetRegexMatchSet operation returned by the service.
- See Also:
-
getRegexMatchSet
default GetRegexMatchSetResponse getRegexMatchSet(Consumer<GetRegexMatchSetRequest.Builder> getRegexMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RegexMatchSet specified by
RegexMatchSetId
.
This is a convenience which creates an instance of the
GetRegexMatchSetRequest.Builder
avoiding the need to create one manually viaGetRegexMatchSetRequest.builder()
- Parameters:
getRegexMatchSetRequest
- AConsumer
that will call methods onGetRegexMatchSetRequest.Builder
to create a request.- Returns:
- Result of the GetRegexMatchSet operation returned by the service.
- See Also:
-
getRegexPatternSet
default GetRegexPatternSetResponse getRegexPatternSet(GetRegexPatternSetRequest getRegexPatternSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RegexPatternSet specified by
RegexPatternSetId
.- Parameters:
getRegexPatternSetRequest
-- Returns:
- Result of the GetRegexPatternSet operation returned by the service.
- See Also:
-
getRegexPatternSet
default GetRegexPatternSetResponse getRegexPatternSet(Consumer<GetRegexPatternSetRequest.Builder> getRegexPatternSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RegexPatternSet specified by
RegexPatternSetId
.
This is a convenience which creates an instance of the
GetRegexPatternSetRequest.Builder
avoiding the need to create one manually viaGetRegexPatternSetRequest.builder()
- Parameters:
getRegexPatternSetRequest
- AConsumer
that will call methods onGetRegexPatternSetRequest.Builder
to create a request.- Returns:
- Result of the GetRegexPatternSet operation returned by the service.
- See Also:
-
getRule
default GetRuleResponse getRule(GetRuleRequest getRuleRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the Rule that is specified by the
RuleId
that you included in theGetRule
request.- Parameters:
getRuleRequest
-- Returns:
- Result of the GetRule operation returned by the service.
- See Also:
-
getRule
default GetRuleResponse getRule(Consumer<GetRuleRequest.Builder> getRuleRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the Rule that is specified by the
RuleId
that you included in theGetRule
request.
This is a convenience which creates an instance of the
GetRuleRequest.Builder
avoiding the need to create one manually viaGetRuleRequest.builder()
- Parameters:
getRuleRequest
- AConsumer
that will call methods onGetRuleRequest.Builder
to create a request.- Returns:
- Result of the GetRule operation returned by the service.
- See Also:
-
getRuleGroup
default GetRuleGroupResponse getRuleGroup(GetRuleGroupRequest getRuleGroupRequest) throws WafInternalErrorException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RuleGroup that is specified by the
RuleGroupId
that you included in theGetRuleGroup
request.To view the rules in a rule group, use ListActivatedRulesInRuleGroup.
- Parameters:
getRuleGroupRequest
-- Returns:
- Result of the GetRuleGroup operation returned by the service.
- See Also:
-
getRuleGroup
default GetRuleGroupResponse getRuleGroup(Consumer<GetRuleGroupRequest.Builder> getRuleGroupRequest) throws WafInternalErrorException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the RuleGroup that is specified by the
RuleGroupId
that you included in theGetRuleGroup
request.To view the rules in a rule group, use ListActivatedRulesInRuleGroup.
This is a convenience which creates an instance of the
GetRuleGroupRequest.Builder
avoiding the need to create one manually viaGetRuleGroupRequest.builder()
- Parameters:
getRuleGroupRequest
- AConsumer
that will call methods onGetRuleGroupRequest.Builder
to create a request.- Returns:
- Result of the GetRuleGroup operation returned by the service.
- See Also:
-
getSampledRequests
default GetSampledRequestsResponse getSampledRequests(GetSampledRequestsRequest getSampledRequestsRequest) throws WafNonexistentItemException, WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Gets detailed information about a specified number of requests--a sample--that AWS WAF randomly selects from among the first 5,000 requests that your AWS resource received during a time range that you choose. You can specify a sample size of up to 500 requests, and you can specify any time range in the previous three hours.
GetSampledRequests
returns a time range, which is usually the time range that you specified. However, if your resource (such as a CloudFront distribution) received 5,000 requests before the specified time range elapsed,GetSampledRequests
returns an updated time range. This new time range indicates the actual period during which AWS WAF selected the requests in the sample.- Parameters:
getSampledRequestsRequest
-- Returns:
- Result of the GetSampledRequests operation returned by the service.
- See Also:
-
getSampledRequests
default GetSampledRequestsResponse getSampledRequests(Consumer<GetSampledRequestsRequest.Builder> getSampledRequestsRequest) throws WafNonexistentItemException, WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Gets detailed information about a specified number of requests--a sample--that AWS WAF randomly selects from among the first 5,000 requests that your AWS resource received during a time range that you choose. You can specify a sample size of up to 500 requests, and you can specify any time range in the previous three hours.
GetSampledRequests
returns a time range, which is usually the time range that you specified. However, if your resource (such as a CloudFront distribution) received 5,000 requests before the specified time range elapsed,GetSampledRequests
returns an updated time range. This new time range indicates the actual period during which AWS WAF selected the requests in the sample.
This is a convenience which creates an instance of the
GetSampledRequestsRequest.Builder
avoiding the need to create one manually viaGetSampledRequestsRequest.builder()
- Parameters:
getSampledRequestsRequest
- AConsumer
that will call methods onGetSampledRequestsRequest.Builder
to create a request.- Returns:
- Result of the GetSampledRequests operation returned by the service.
- See Also:
-
getSizeConstraintSet
default GetSizeConstraintSetResponse getSizeConstraintSet(GetSizeConstraintSetRequest getSizeConstraintSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the SizeConstraintSet specified by
SizeConstraintSetId
.- Parameters:
getSizeConstraintSetRequest
-- Returns:
- Result of the GetSizeConstraintSet operation returned by the service.
- See Also:
-
getSizeConstraintSet
default GetSizeConstraintSetResponse getSizeConstraintSet(Consumer<GetSizeConstraintSetRequest.Builder> getSizeConstraintSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the SizeConstraintSet specified by
SizeConstraintSetId
.
This is a convenience which creates an instance of the
GetSizeConstraintSetRequest.Builder
avoiding the need to create one manually viaGetSizeConstraintSetRequest.builder()
- Parameters:
getSizeConstraintSetRequest
- AConsumer
that will call methods onGetSizeConstraintSetRequest.Builder
to create a request.- Returns:
- Result of the GetSizeConstraintSet operation returned by the service.
- See Also:
-
getSqlInjectionMatchSet
default GetSqlInjectionMatchSetResponse getSqlInjectionMatchSet(GetSqlInjectionMatchSetRequest getSqlInjectionMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the SqlInjectionMatchSet that is specified by
SqlInjectionMatchSetId
.- Parameters:
getSqlInjectionMatchSetRequest
- A request to get a SqlInjectionMatchSet.- Returns:
- Result of the GetSqlInjectionMatchSet operation returned by the service.
- See Also:
-
getSqlInjectionMatchSet
default GetSqlInjectionMatchSetResponse getSqlInjectionMatchSet(Consumer<GetSqlInjectionMatchSetRequest.Builder> getSqlInjectionMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the SqlInjectionMatchSet that is specified by
SqlInjectionMatchSetId
.
This is a convenience which creates an instance of the
GetSqlInjectionMatchSetRequest.Builder
avoiding the need to create one manually viaGetSqlInjectionMatchSetRequest.builder()
- Parameters:
getSqlInjectionMatchSetRequest
- AConsumer
that will call methods onGetSqlInjectionMatchSetRequest.Builder
to create a request. A request to get a SqlInjectionMatchSet.- Returns:
- Result of the GetSqlInjectionMatchSet operation returned by the service.
- See Also:
-
getWebACL
default GetWebAclResponse getWebACL(GetWebAclRequest getWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the WebACL that is specified by
WebACLId
.- Parameters:
getWebAclRequest
-- Returns:
- Result of the GetWebACL operation returned by the service.
- See Also:
-
getWebACL
default GetWebAclResponse getWebACL(Consumer<GetWebAclRequest.Builder> getWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the WebACL that is specified by
WebACLId
.
This is a convenience which creates an instance of the
GetWebAclRequest.Builder
avoiding the need to create one manually viaGetWebAclRequest.builder()
- Parameters:
getWebAclRequest
- AConsumer
that will call methods onGetWebAclRequest.Builder
to create a request.- Returns:
- Result of the GetWebACL operation returned by the service.
- See Also:
-
getWebACLForResource
default GetWebAclForResourceResponse getWebACLForResource(GetWebAclForResourceRequest getWebAclForResourceRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafInvalidParameterException, WafUnavailableEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the web ACL for the specified resource, either an application load balancer or Amazon API Gateway stage.
- Parameters:
getWebAclForResourceRequest
-- Returns:
- Result of the GetWebACLForResource operation returned by the service.
- See Also:
-
getWebACLForResource
default GetWebAclForResourceResponse getWebACLForResource(Consumer<GetWebAclForResourceRequest.Builder> getWebAclForResourceRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafInvalidParameterException, WafUnavailableEntityException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the web ACL for the specified resource, either an application load balancer or Amazon API Gateway stage.
This is a convenience which creates an instance of the
GetWebAclForResourceRequest.Builder
avoiding the need to create one manually viaGetWebAclForResourceRequest.builder()
- Parameters:
getWebAclForResourceRequest
- AConsumer
that will call methods onGetWebAclForResourceRequest.Builder
to create a request.- Returns:
- Result of the GetWebACLForResource operation returned by the service.
- See Also:
-
getXssMatchSet
default GetXssMatchSetResponse getXssMatchSet(GetXssMatchSetRequest getXssMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the XssMatchSet that is specified by
XssMatchSetId
.- Parameters:
getXssMatchSetRequest
- A request to get an XssMatchSet.- Returns:
- Result of the GetXssMatchSet operation returned by the service.
- See Also:
-
getXssMatchSet
default GetXssMatchSetResponse getXssMatchSet(Consumer<GetXssMatchSetRequest.Builder> getXssMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns the XssMatchSet that is specified by
XssMatchSetId
.
This is a convenience which creates an instance of the
GetXssMatchSetRequest.Builder
avoiding the need to create one manually viaGetXssMatchSetRequest.builder()
- Parameters:
getXssMatchSetRequest
- AConsumer
that will call methods onGetXssMatchSetRequest.Builder
to create a request. A request to get an XssMatchSet.- Returns:
- Result of the GetXssMatchSet operation returned by the service.
- See Also:
-
listActivatedRulesInRuleGroup
default ListActivatedRulesInRuleGroupResponse listActivatedRulesInRuleGroup(ListActivatedRulesInRuleGroupRequest listActivatedRulesInRuleGroupRequest) throws WafInternalErrorException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of ActivatedRule objects.
- Parameters:
listActivatedRulesInRuleGroupRequest
-- Returns:
- Result of the ListActivatedRulesInRuleGroup operation returned by the service.
- See Also:
-
listActivatedRulesInRuleGroup
default ListActivatedRulesInRuleGroupResponse listActivatedRulesInRuleGroup(Consumer<ListActivatedRulesInRuleGroupRequest.Builder> listActivatedRulesInRuleGroupRequest) throws WafInternalErrorException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of ActivatedRule objects.
This is a convenience which creates an instance of the
ListActivatedRulesInRuleGroupRequest.Builder
avoiding the need to create one manually viaListActivatedRulesInRuleGroupRequest.builder()
- Parameters:
listActivatedRulesInRuleGroupRequest
- AConsumer
that will call methods onListActivatedRulesInRuleGroupRequest.Builder
to create a request.- Returns:
- Result of the ListActivatedRulesInRuleGroup operation returned by the service.
- See Also:
-
listByteMatchSets
default ListByteMatchSetsResponse listByteMatchSets(ListByteMatchSetsRequest listByteMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of ByteMatchSetSummary objects.
- Parameters:
listByteMatchSetsRequest
-- Returns:
- Result of the ListByteMatchSets operation returned by the service.
- See Also:
-
listByteMatchSets
default ListByteMatchSetsResponse listByteMatchSets(Consumer<ListByteMatchSetsRequest.Builder> listByteMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of ByteMatchSetSummary objects.
This is a convenience which creates an instance of the
ListByteMatchSetsRequest.Builder
avoiding the need to create one manually viaListByteMatchSetsRequest.builder()
- Parameters:
listByteMatchSetsRequest
- AConsumer
that will call methods onListByteMatchSetsRequest.Builder
to create a request.- Returns:
- Result of the ListByteMatchSets operation returned by the service.
- See Also:
-
listByteMatchSets
default ListByteMatchSetsResponse listByteMatchSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of ByteMatchSetSummary objects.
- Returns:
- Result of the ListByteMatchSets operation returned by the service.
- See Also:
-
listGeoMatchSets
default ListGeoMatchSetsResponse listGeoMatchSets(ListGeoMatchSetsRequest listGeoMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of GeoMatchSetSummary objects in the response.
- Parameters:
listGeoMatchSetsRequest
-- Returns:
- Result of the ListGeoMatchSets operation returned by the service.
- See Also:
-
listGeoMatchSets
default ListGeoMatchSetsResponse listGeoMatchSets(Consumer<ListGeoMatchSetsRequest.Builder> listGeoMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of GeoMatchSetSummary objects in the response.
This is a convenience which creates an instance of the
ListGeoMatchSetsRequest.Builder
avoiding the need to create one manually viaListGeoMatchSetsRequest.builder()
- Parameters:
listGeoMatchSetsRequest
- AConsumer
that will call methods onListGeoMatchSetsRequest.Builder
to create a request.- Returns:
- Result of the ListGeoMatchSets operation returned by the service.
- See Also:
-
listGeoMatchSets
default ListGeoMatchSetsResponse listGeoMatchSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of GeoMatchSetSummary objects in the response.
- Returns:
- Result of the ListGeoMatchSets operation returned by the service.
- See Also:
-
listIPSets
default ListIpSetsResponse listIPSets(ListIpSetsRequest listIpSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of IPSetSummary objects in the response.
- Parameters:
listIpSetsRequest
-- Returns:
- Result of the ListIPSets operation returned by the service.
- See Also:
-
listIPSets
default ListIpSetsResponse listIPSets(Consumer<ListIpSetsRequest.Builder> listIpSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of IPSetSummary objects in the response.
This is a convenience which creates an instance of the
ListIpSetsRequest.Builder
avoiding the need to create one manually viaListIpSetsRequest.builder()
- Parameters:
listIpSetsRequest
- AConsumer
that will call methods onListIpSetsRequest.Builder
to create a request.- Returns:
- Result of the ListIPSets operation returned by the service.
- See Also:
-
listIPSets
default ListIpSetsResponse listIPSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of IPSetSummary objects in the response.
- Returns:
- Result of the ListIPSets operation returned by the service.
- See Also:
-
listLoggingConfigurations
default ListLoggingConfigurationsResponse listLoggingConfigurations(ListLoggingConfigurationsRequest listLoggingConfigurationsRequest) throws WafInternalErrorException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of LoggingConfiguration objects.
- Parameters:
listLoggingConfigurationsRequest
-- Returns:
- Result of the ListLoggingConfigurations operation returned by the service.
- See Also:
-
listLoggingConfigurations
default ListLoggingConfigurationsResponse listLoggingConfigurations(Consumer<ListLoggingConfigurationsRequest.Builder> listLoggingConfigurationsRequest) throws WafInternalErrorException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of LoggingConfiguration objects.
This is a convenience which creates an instance of the
ListLoggingConfigurationsRequest.Builder
avoiding the need to create one manually viaListLoggingConfigurationsRequest.builder()
- Parameters:
listLoggingConfigurationsRequest
- AConsumer
that will call methods onListLoggingConfigurationsRequest.Builder
to create a request.- Returns:
- Result of the ListLoggingConfigurations operation returned by the service.
- See Also:
-
listRateBasedRules
default ListRateBasedRulesResponse listRateBasedRules(ListRateBasedRulesRequest listRateBasedRulesRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleSummary objects.
- Parameters:
listRateBasedRulesRequest
-- Returns:
- Result of the ListRateBasedRules operation returned by the service.
- See Also:
-
listRateBasedRules
default ListRateBasedRulesResponse listRateBasedRules(Consumer<ListRateBasedRulesRequest.Builder> listRateBasedRulesRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleSummary objects.
This is a convenience which creates an instance of the
ListRateBasedRulesRequest.Builder
avoiding the need to create one manually viaListRateBasedRulesRequest.builder()
- Parameters:
listRateBasedRulesRequest
- AConsumer
that will call methods onListRateBasedRulesRequest.Builder
to create a request.- Returns:
- Result of the ListRateBasedRules operation returned by the service.
- See Also:
-
listRateBasedRules
default ListRateBasedRulesResponse listRateBasedRules() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleSummary objects.
- Returns:
- Result of the ListRateBasedRules operation returned by the service.
- See Also:
-
listRegexMatchSets
default ListRegexMatchSetsResponse listRegexMatchSets(ListRegexMatchSetsRequest listRegexMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RegexMatchSetSummary objects.
- Parameters:
listRegexMatchSetsRequest
-- Returns:
- Result of the ListRegexMatchSets operation returned by the service.
- See Also:
-
listRegexMatchSets
default ListRegexMatchSetsResponse listRegexMatchSets(Consumer<ListRegexMatchSetsRequest.Builder> listRegexMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RegexMatchSetSummary objects.
This is a convenience which creates an instance of the
ListRegexMatchSetsRequest.Builder
avoiding the need to create one manually viaListRegexMatchSetsRequest.builder()
- Parameters:
listRegexMatchSetsRequest
- AConsumer
that will call methods onListRegexMatchSetsRequest.Builder
to create a request.- Returns:
- Result of the ListRegexMatchSets operation returned by the service.
- See Also:
-
listRegexMatchSets
default ListRegexMatchSetsResponse listRegexMatchSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RegexMatchSetSummary objects.
- Returns:
- Result of the ListRegexMatchSets operation returned by the service.
- See Also:
-
listRegexPatternSets
default ListRegexPatternSetsResponse listRegexPatternSets(ListRegexPatternSetsRequest listRegexPatternSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RegexPatternSetSummary objects.
- Parameters:
listRegexPatternSetsRequest
-- Returns:
- Result of the ListRegexPatternSets operation returned by the service.
- See Also:
-
listRegexPatternSets
default ListRegexPatternSetsResponse listRegexPatternSets(Consumer<ListRegexPatternSetsRequest.Builder> listRegexPatternSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RegexPatternSetSummary objects.
This is a convenience which creates an instance of the
ListRegexPatternSetsRequest.Builder
avoiding the need to create one manually viaListRegexPatternSetsRequest.builder()
- Parameters:
listRegexPatternSetsRequest
- AConsumer
that will call methods onListRegexPatternSetsRequest.Builder
to create a request.- Returns:
- Result of the ListRegexPatternSets operation returned by the service.
- See Also:
-
listRegexPatternSets
default ListRegexPatternSetsResponse listRegexPatternSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RegexPatternSetSummary objects.
- Returns:
- Result of the ListRegexPatternSets operation returned by the service.
- See Also:
-
listResourcesForWebACL
default ListResourcesForWebAclResponse listResourcesForWebACL(ListResourcesForWebAclRequest listResourcesForWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of resources associated with the specified web ACL.
- Parameters:
listResourcesForWebAclRequest
-- Returns:
- Result of the ListResourcesForWebACL operation returned by the service.
- See Also:
-
listResourcesForWebACL
default ListResourcesForWebAclResponse listResourcesForWebACL(Consumer<ListResourcesForWebAclRequest.Builder> listResourcesForWebAclRequest) throws WafInternalErrorException, WafInvalidAccountException, WafNonexistentItemException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of resources associated with the specified web ACL.
This is a convenience which creates an instance of the
ListResourcesForWebAclRequest.Builder
avoiding the need to create one manually viaListResourcesForWebAclRequest.builder()
- Parameters:
listResourcesForWebAclRequest
- AConsumer
that will call methods onListResourcesForWebAclRequest.Builder
to create a request.- Returns:
- Result of the ListResourcesForWebACL operation returned by the service.
- See Also:
-
listRuleGroups
default ListRuleGroupsResponse listRuleGroups(ListRuleGroupsRequest listRuleGroupsRequest) throws WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleGroup objects.
- Parameters:
listRuleGroupsRequest
-- Returns:
- Result of the ListRuleGroups operation returned by the service.
- See Also:
-
listRuleGroups
default ListRuleGroupsResponse listRuleGroups(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest) throws WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleGroup objects.
This is a convenience which creates an instance of the
ListRuleGroupsRequest.Builder
avoiding the need to create one manually viaListRuleGroupsRequest.builder()
- Parameters:
listRuleGroupsRequest
- AConsumer
that will call methods onListRuleGroupsRequest.Builder
to create a request.- Returns:
- Result of the ListRuleGroups operation returned by the service.
- See Also:
-
listRuleGroups
default ListRuleGroupsResponse listRuleGroups() throws WafInternalErrorException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleGroup objects.
- Returns:
- Result of the ListRuleGroups operation returned by the service.
- See Also:
-
listRules
default ListRulesResponse listRules(ListRulesRequest listRulesRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleSummary objects.
- Parameters:
listRulesRequest
-- Returns:
- Result of the ListRules operation returned by the service.
- See Also:
-
listRules
default ListRulesResponse listRules(Consumer<ListRulesRequest.Builder> listRulesRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleSummary objects.
This is a convenience which creates an instance of the
ListRulesRequest.Builder
avoiding the need to create one manually viaListRulesRequest.builder()
- Parameters:
listRulesRequest
- AConsumer
that will call methods onListRulesRequest.Builder
to create a request.- Returns:
- Result of the ListRules operation returned by the service.
- See Also:
-
listRules
default ListRulesResponse listRules() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleSummary objects.
- Returns:
- Result of the ListRules operation returned by the service.
- See Also:
-
listSizeConstraintSets
default ListSizeConstraintSetsResponse listSizeConstraintSets(ListSizeConstraintSetsRequest listSizeConstraintSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of SizeConstraintSetSummary objects.
- Parameters:
listSizeConstraintSetsRequest
-- Returns:
- Result of the ListSizeConstraintSets operation returned by the service.
- See Also:
-
listSizeConstraintSets
default ListSizeConstraintSetsResponse listSizeConstraintSets(Consumer<ListSizeConstraintSetsRequest.Builder> listSizeConstraintSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of SizeConstraintSetSummary objects.
This is a convenience which creates an instance of the
ListSizeConstraintSetsRequest.Builder
avoiding the need to create one manually viaListSizeConstraintSetsRequest.builder()
- Parameters:
listSizeConstraintSetsRequest
- AConsumer
that will call methods onListSizeConstraintSetsRequest.Builder
to create a request.- Returns:
- Result of the ListSizeConstraintSets operation returned by the service.
- See Also:
-
listSizeConstraintSets
default ListSizeConstraintSetsResponse listSizeConstraintSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of SizeConstraintSetSummary objects.
- Returns:
- Result of the ListSizeConstraintSets operation returned by the service.
- See Also:
-
listSqlInjectionMatchSets
default ListSqlInjectionMatchSetsResponse listSqlInjectionMatchSets(ListSqlInjectionMatchSetsRequest listSqlInjectionMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of SqlInjectionMatchSet objects.
- Parameters:
listSqlInjectionMatchSetsRequest
- A request to list the SqlInjectionMatchSet objects created by the current AWS account.- Returns:
- Result of the ListSqlInjectionMatchSets operation returned by the service.
- See Also:
-
listSqlInjectionMatchSets
default ListSqlInjectionMatchSetsResponse listSqlInjectionMatchSets(Consumer<ListSqlInjectionMatchSetsRequest.Builder> listSqlInjectionMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of SqlInjectionMatchSet objects.
This is a convenience which creates an instance of the
ListSqlInjectionMatchSetsRequest.Builder
avoiding the need to create one manually viaListSqlInjectionMatchSetsRequest.builder()
- Parameters:
listSqlInjectionMatchSetsRequest
- AConsumer
that will call methods onListSqlInjectionMatchSetsRequest.Builder
to create a request. A request to list the SqlInjectionMatchSet objects created by the current AWS account.- Returns:
- Result of the ListSqlInjectionMatchSets operation returned by the service.
- See Also:
-
listSqlInjectionMatchSets
default ListSqlInjectionMatchSetsResponse listSqlInjectionMatchSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of SqlInjectionMatchSet objects.
- Returns:
- Result of the ListSqlInjectionMatchSets operation returned by the service.
- See Also:
-
listSubscribedRuleGroups
default ListSubscribedRuleGroupsResponse listSubscribedRuleGroups(ListSubscribedRuleGroupsRequest listSubscribedRuleGroupsRequest) throws WafNonexistentItemException, WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleGroup objects that you are subscribed to.
- Parameters:
listSubscribedRuleGroupsRequest
-- Returns:
- Result of the ListSubscribedRuleGroups operation returned by the service.
- See Also:
-
listSubscribedRuleGroups
default ListSubscribedRuleGroupsResponse listSubscribedRuleGroups(Consumer<ListSubscribedRuleGroupsRequest.Builder> listSubscribedRuleGroupsRequest) throws WafNonexistentItemException, WafInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleGroup objects that you are subscribed to.
This is a convenience which creates an instance of the
ListSubscribedRuleGroupsRequest.Builder
avoiding the need to create one manually viaListSubscribedRuleGroupsRequest.builder()
- Parameters:
listSubscribedRuleGroupsRequest
- AConsumer
that will call methods onListSubscribedRuleGroupsRequest.Builder
to create a request.- Returns:
- Result of the ListSubscribedRuleGroups operation returned by the service.
- See Also:
-
listSubscribedRuleGroups
default ListSubscribedRuleGroupsResponse listSubscribedRuleGroups() throws WafNonexistentItemException, WafInternalErrorException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of RuleGroup objects that you are subscribed to.
- Returns:
- Result of the ListSubscribedRuleGroups operation returned by the service.
- See Also:
-
listTagsForResource
default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest) throws WafInternalErrorException, WafInvalidParameterException, WafNonexistentItemException, WafBadRequestException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Retrieves the tags associated with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.
Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.
- Parameters:
listTagsForResourceRequest
-- Returns:
- Result of the ListTagsForResource operation returned by the service.
- See Also:
-
listTagsForResource
default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) throws WafInternalErrorException, WafInvalidParameterException, WafNonexistentItemException, WafBadRequestException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Retrieves the tags associated with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.
Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.
This is a convenience which creates an instance of the
ListTagsForResourceRequest.Builder
avoiding the need to create one manually viaListTagsForResourceRequest.builder()
- Parameters:
listTagsForResourceRequest
- AConsumer
that will call methods onListTagsForResourceRequest.Builder
to create a request.- Returns:
- Result of the ListTagsForResource operation returned by the service.
- See Also:
-
listWebACLs
default ListWebAcLsResponse listWebACLs(ListWebAcLsRequest listWebAcLsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of WebACLSummary objects in the response.
- Parameters:
listWebAcLsRequest
-- Returns:
- Result of the ListWebACLs operation returned by the service.
- See Also:
-
listWebACLs
default ListWebAcLsResponse listWebACLs(Consumer<ListWebAcLsRequest.Builder> listWebAcLsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of WebACLSummary objects in the response.
This is a convenience which creates an instance of the
ListWebAcLsRequest.Builder
avoiding the need to create one manually viaListWebAcLsRequest.builder()
- Parameters:
listWebAcLsRequest
- AConsumer
that will call methods onListWebAcLsRequest.Builder
to create a request.- Returns:
- Result of the ListWebACLs operation returned by the service.
- See Also:
-
listWebACLs
default ListWebAcLsResponse listWebACLs() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of WebACLSummary objects in the response.
- Returns:
- Result of the ListWebACLs operation returned by the service.
- See Also:
-
listXssMatchSets
default ListXssMatchSetsResponse listXssMatchSets(ListXssMatchSetsRequest listXssMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of XssMatchSet objects.
- Parameters:
listXssMatchSetsRequest
- A request to list the XssMatchSet objects created by the current AWS account.- Returns:
- Result of the ListXssMatchSets operation returned by the service.
- See Also:
-
listXssMatchSets
default ListXssMatchSetsResponse listXssMatchSets(Consumer<ListXssMatchSetsRequest.Builder> listXssMatchSetsRequest) throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of XssMatchSet objects.
This is a convenience which creates an instance of the
ListXssMatchSetsRequest.Builder
avoiding the need to create one manually viaListXssMatchSetsRequest.builder()
- Parameters:
listXssMatchSetsRequest
- AConsumer
that will call methods onListXssMatchSetsRequest.Builder
to create a request. A request to list the XssMatchSet objects created by the current AWS account.- Returns:
- Result of the ListXssMatchSets operation returned by the service.
- See Also:
-
listXssMatchSets
default ListXssMatchSetsResponse listXssMatchSets() throws WafInternalErrorException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafExceptionThis is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Returns an array of XssMatchSet objects.
- Returns:
- Result of the ListXssMatchSets operation returned by the service.
- See Also:
-
putLoggingConfiguration
default PutLoggingConfigurationResponse putLoggingConfiguration(PutLoggingConfigurationRequest putLoggingConfigurationRequest) throws WafInternalErrorException, WafNonexistentItemException, WafStaleDataException, WafServiceLinkedRoleErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Associates a LoggingConfiguration with a specified web ACL.
You can access information about all traffic that AWS WAF inspects using the following steps:
-
Create an Amazon Kinesis Data Firehose.
Create the data firehose with a PUT source and in the region that you are operating. However, if you are capturing logs for Amazon CloudFront, always create the firehose in US East (N. Virginia).
Do not create the data firehose using a
Kinesis stream
as your source. -
Associate that firehose to your web ACL using a
PutLoggingConfiguration
request.
When you successfully enable logging using a
PutLoggingConfiguration
request, AWS WAF will create a service linked role with the necessary permissions to write logs to the Amazon Kinesis Data Firehose. For more information, see Logging Web ACL Traffic Information in the AWS WAF Developer Guide.- Parameters:
putLoggingConfigurationRequest
-- Returns:
- Result of the PutLoggingConfiguration operation returned by the service.
- See Also:
-
-
putLoggingConfiguration
default PutLoggingConfigurationResponse putLoggingConfiguration(Consumer<PutLoggingConfigurationRequest.Builder> putLoggingConfigurationRequest) throws WafInternalErrorException, WafNonexistentItemException, WafStaleDataException, WafServiceLinkedRoleErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Associates a LoggingConfiguration with a specified web ACL.
You can access information about all traffic that AWS WAF inspects using the following steps:
-
Create an Amazon Kinesis Data Firehose.
Create the data firehose with a PUT source and in the region that you are operating. However, if you are capturing logs for Amazon CloudFront, always create the firehose in US East (N. Virginia).
Do not create the data firehose using a
Kinesis stream
as your source. -
Associate that firehose to your web ACL using a
PutLoggingConfiguration
request.
When you successfully enable logging using a
PutLoggingConfiguration
request, AWS WAF will create a service linked role with the necessary permissions to write logs to the Amazon Kinesis Data Firehose. For more information, see Logging Web ACL Traffic Information in the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
PutLoggingConfigurationRequest.Builder
avoiding the need to create one manually viaPutLoggingConfigurationRequest.builder()
- Parameters:
putLoggingConfigurationRequest
- AConsumer
that will call methods onPutLoggingConfigurationRequest.Builder
to create a request.- Returns:
- Result of the PutLoggingConfiguration operation returned by the service.
- See Also:
-
-
putPermissionPolicy
default PutPermissionPolicyResponse putPermissionPolicy(PutPermissionPolicyRequest putPermissionPolicyRequest) throws WafInternalErrorException, WafStaleDataException, WafNonexistentItemException, WafInvalidPermissionPolicyException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Attaches an IAM policy to the specified resource. The only supported use for this action is to share a RuleGroup across accounts.
The
PutPermissionPolicy
is subject to the following restrictions:-
You can attach only one policy with each
PutPermissionPolicy
request. -
The policy must include an
Effect
,Action
andPrincipal
. -
Effect
must specifyAllow
. -
The
Action
in the policy must bewaf:UpdateWebACL
,waf-regional:UpdateWebACL
,waf:GetRuleGroup
andwaf-regional:GetRuleGroup
. Any extra or wildcard actions in the policy will be rejected. -
The policy cannot include a
Resource
parameter. -
The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region.
-
The user making the request must be the owner of the RuleGroup.
-
Your policy must be composed using IAM Policy version 2012-10-17.
For more information, see IAM Policies.
An example of a valid policy parameter is shown in the Examples section below.
- Parameters:
putPermissionPolicyRequest
-- Returns:
- Result of the PutPermissionPolicy operation returned by the service.
- See Also:
-
-
putPermissionPolicy
default PutPermissionPolicyResponse putPermissionPolicy(Consumer<PutPermissionPolicyRequest.Builder> putPermissionPolicyRequest) throws WafInternalErrorException, WafStaleDataException, WafNonexistentItemException, WafInvalidPermissionPolicyException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Attaches an IAM policy to the specified resource. The only supported use for this action is to share a RuleGroup across accounts.
The
PutPermissionPolicy
is subject to the following restrictions:-
You can attach only one policy with each
PutPermissionPolicy
request. -
The policy must include an
Effect
,Action
andPrincipal
. -
Effect
must specifyAllow
. -
The
Action
in the policy must bewaf:UpdateWebACL
,waf-regional:UpdateWebACL
,waf:GetRuleGroup
andwaf-regional:GetRuleGroup
. Any extra or wildcard actions in the policy will be rejected. -
The policy cannot include a
Resource
parameter. -
The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region.
-
The user making the request must be the owner of the RuleGroup.
-
Your policy must be composed using IAM Policy version 2012-10-17.
For more information, see IAM Policies.
An example of a valid policy parameter is shown in the Examples section below.
This is a convenience which creates an instance of the
PutPermissionPolicyRequest.Builder
avoiding the need to create one manually viaPutPermissionPolicyRequest.builder()
- Parameters:
putPermissionPolicyRequest
- AConsumer
that will call methods onPutPermissionPolicyRequest.Builder
to create a request.- Returns:
- Result of the PutPermissionPolicy operation returned by the service.
- See Also:
-
-
tagResource
default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest) throws WafInternalErrorException, WafInvalidParameterException, WafLimitsExceededException, WafNonexistentItemException, WafBadRequestException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Associates tags with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.
Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can use this action to tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.
- Parameters:
tagResourceRequest
-- Returns:
- Result of the TagResource operation returned by the service.
- See Also:
-
tagResource
default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest) throws WafInternalErrorException, WafInvalidParameterException, WafLimitsExceededException, WafNonexistentItemException, WafBadRequestException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Associates tags with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource.
Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can use this action to tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.
This is a convenience which creates an instance of the
TagResourceRequest.Builder
avoiding the need to create one manually viaTagResourceRequest.builder()
- Parameters:
tagResourceRequest
- AConsumer
that will call methods onTagResourceRequest.Builder
to create a request.- Returns:
- Result of the TagResource operation returned by the service.
- See Also:
-
untagResource
default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest) throws WafInternalErrorException, WafInvalidParameterException, WafNonexistentItemException, WafBadRequestException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
- Parameters:
untagResourceRequest
-- Returns:
- Result of the UntagResource operation returned by the service.
- See Also:
-
untagResource
default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest) throws WafInternalErrorException, WafInvalidParameterException, WafNonexistentItemException, WafBadRequestException, WafTagOperationException, WafTagOperationInternalErrorException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
This is a convenience which creates an instance of the
UntagResourceRequest.Builder
avoiding the need to create one manually viaUntagResourceRequest.builder()
- Parameters:
untagResourceRequest
- AConsumer
that will call methods onUntagResourceRequest.Builder
to create a request.- Returns:
- Result of the UntagResource operation returned by the service.
- See Also:
-
updateByteMatchSet
default UpdateByteMatchSetResponse updateByteMatchSet(UpdateByteMatchSetRequest updateByteMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes ByteMatchTuple objects (filters) in a ByteMatchSet. For each
ByteMatchTuple
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change a
ByteMatchSetUpdate
object, you delete the existing object and add a new one. -
The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the
User-Agent
header. -
The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify the values for the AWS WAF API and the AWS CLI or SDKs, see
TargetString
in the ByteMatchTuple data type. -
Where to look, such as at the beginning or the end of a query string.
-
Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.
For example, you can add a
ByteMatchSetUpdate
object that matches web requests in whichUser-Agent
headers contain the stringBadBot
. You can then configure AWS WAF to block those requests.To create and configure a
ByteMatchSet
, perform the following steps:-
Create a
ByteMatchSet.
For more information, see CreateByteMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateByteMatchSet
request. -
Submit an
UpdateByteMatchSet
request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateByteMatchSetRequest
-- Returns:
- Result of the UpdateByteMatchSet operation returned by the service.
- See Also:
-
-
updateByteMatchSet
default UpdateByteMatchSetResponse updateByteMatchSet(Consumer<UpdateByteMatchSetRequest.Builder> updateByteMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes ByteMatchTuple objects (filters) in a ByteMatchSet. For each
ByteMatchTuple
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change a
ByteMatchSetUpdate
object, you delete the existing object and add a new one. -
The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the
User-Agent
header. -
The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify the values for the AWS WAF API and the AWS CLI or SDKs, see
TargetString
in the ByteMatchTuple data type. -
Where to look, such as at the beginning or the end of a query string.
-
Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.
For example, you can add a
ByteMatchSetUpdate
object that matches web requests in whichUser-Agent
headers contain the stringBadBot
. You can then configure AWS WAF to block those requests.To create and configure a
ByteMatchSet
, perform the following steps:-
Create a
ByteMatchSet.
For more information, see CreateByteMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateByteMatchSet
request. -
Submit an
UpdateByteMatchSet
request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateByteMatchSetRequest.Builder
avoiding the need to create one manually viaUpdateByteMatchSetRequest.builder()
- Parameters:
updateByteMatchSetRequest
- AConsumer
that will call methods onUpdateByteMatchSetRequest.Builder
to create a request.- Returns:
- Result of the UpdateByteMatchSet operation returned by the service.
- See Also:
-
-
updateGeoMatchSet
default UpdateGeoMatchSetResponse updateGeoMatchSet(UpdateGeoMatchSetRequest updateGeoMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes GeoMatchConstraint objects in an
GeoMatchSet
. For eachGeoMatchConstraint
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change an
GeoMatchConstraint
object, you delete the existing object and add a new one. -
The
Type
. The only valid value forType
isCountry
. -
The
Value
, which is a two character code for the country to add to theGeoMatchConstraint
object. Valid codes are listed in GeoMatchConstraintinvalid input: '$'Value.
To create and configure an
GeoMatchSet
, perform the following steps:-
Submit a CreateGeoMatchSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateGeoMatchSet request. -
Submit an
UpdateGeoMatchSet
request to specify the country that you want AWS WAF to watch for.
When you update an
GeoMatchSet
, you specify the country that you want to add and/or the country that you want to delete. If you want to change a country, you delete the existing country and add the new one.For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateGeoMatchSetRequest
-- Returns:
- Result of the UpdateGeoMatchSet operation returned by the service.
- See Also:
-
-
updateGeoMatchSet
default UpdateGeoMatchSetResponse updateGeoMatchSet(Consumer<UpdateGeoMatchSetRequest.Builder> updateGeoMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes GeoMatchConstraint objects in an
GeoMatchSet
. For eachGeoMatchConstraint
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change an
GeoMatchConstraint
object, you delete the existing object and add a new one. -
The
Type
. The only valid value forType
isCountry
. -
The
Value
, which is a two character code for the country to add to theGeoMatchConstraint
object. Valid codes are listed in GeoMatchConstraintinvalid input: '$'Value.
To create and configure an
GeoMatchSet
, perform the following steps:-
Submit a CreateGeoMatchSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateGeoMatchSet request. -
Submit an
UpdateGeoMatchSet
request to specify the country that you want AWS WAF to watch for.
When you update an
GeoMatchSet
, you specify the country that you want to add and/or the country that you want to delete. If you want to change a country, you delete the existing country and add the new one.For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateGeoMatchSetRequest.Builder
avoiding the need to create one manually viaUpdateGeoMatchSetRequest.builder()
- Parameters:
updateGeoMatchSetRequest
- AConsumer
that will call methods onUpdateGeoMatchSetRequest.Builder
to create a request.- Returns:
- Result of the UpdateGeoMatchSet operation returned by the service.
- See Also:
-
-
updateIPSet
default UpdateIpSetResponse updateIPSet(UpdateIpSetRequest updateIpSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes IPSetDescriptor objects in an
IPSet
. For eachIPSetDescriptor
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change an
IPSetDescriptor
object, you delete the existing object and add a new one. -
The IP address version,
IPv4
orIPv6
. -
The IP address in CIDR notation, for example,
192.0.2.0/24
(for the range of IP addresses from192.0.2.0
to192.0.2.255
) or192.0.2.44/32
(for the individual IP address192.0.2.44
).
AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
IPv6 addresses can be represented using any of the following formats:
-
1111:0000:0000:0000:0000:0000:0000:0111/128
-
1111:0:0:0:0:0:0:0111/128
-
1111::0111/128
-
1111::111/128
You use an
IPSet
to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you're receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create anIPSet
that specifies those IP addresses, and then configure AWS WAF to block the requests.To create and configure an
IPSet
, perform the following steps:-
Submit a CreateIPSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateIPSet
request to specify the IP addresses that you want AWS WAF to watch for.
When you update an
IPSet
, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one.You can insert a maximum of 1000 addresses in a single request.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateIpSetRequest
-- Returns:
- Result of the UpdateIPSet operation returned by the service.
- See Also:
-
-
updateIPSet
default UpdateIpSetResponse updateIPSet(Consumer<UpdateIpSetRequest.Builder> updateIpSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes IPSetDescriptor objects in an
IPSet
. For eachIPSetDescriptor
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change an
IPSetDescriptor
object, you delete the existing object and add a new one. -
The IP address version,
IPv4
orIPv6
. -
The IP address in CIDR notation, for example,
192.0.2.0/24
(for the range of IP addresses from192.0.2.0
to192.0.2.255
) or192.0.2.44/32
(for the individual IP address192.0.2.44
).
AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
IPv6 addresses can be represented using any of the following formats:
-
1111:0000:0000:0000:0000:0000:0000:0111/128
-
1111:0:0:0:0:0:0:0111/128
-
1111::0111/128
-
1111::111/128
You use an
IPSet
to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you're receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create anIPSet
that specifies those IP addresses, and then configure AWS WAF to block the requests.To create and configure an
IPSet
, perform the following steps:-
Submit a CreateIPSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateIPSet
request to specify the IP addresses that you want AWS WAF to watch for.
When you update an
IPSet
, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one.You can insert a maximum of 1000 addresses in a single request.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateIpSetRequest.Builder
avoiding the need to create one manually viaUpdateIpSetRequest.builder()
- Parameters:
updateIpSetRequest
- AConsumer
that will call methods onUpdateIpSetRequest.Builder
to create a request.- Returns:
- Result of the UpdateIPSet operation returned by the service.
- See Also:
-
-
updateRateBasedRule
default UpdateRateBasedRuleResponse updateRateBasedRule(UpdateRateBasedRuleRequest updateRateBasedRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes Predicate objects in a rule and updates the
RateLimit
in the rule.Each
Predicate
object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. TheRateLimit
specifies the number of requests every five minutes that triggers the rule.If you add more than one predicate to a
RateBasedRule
, a request must match all the predicates and exceed theRateLimit
to be counted or blocked. For example, suppose you add the following to aRateBasedRule
:-
An
IPSet
that matches the IP address192.0.2.44/32
-
A
ByteMatchSet
that matchesBadBot
in theUser-Agent
header
Further, you specify a
RateLimit
of 1,000.You then add the
RateBasedRule
to aWebACL
and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and theUser-Agent
header in the request must contain the valueBadBot
. Further, requests that match these two conditions much be received at a rate of more than 1,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests.As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a
RateBasedRule
:-
A
ByteMatchSet
withFieldToMatch
ofURI
-
A
PositionalConstraint
ofSTARTS_WITH
-
A
TargetString
oflogin
Further, you specify a
RateLimit
of 1,000.By adding this
RateBasedRule
to aWebACL
, you could limit requests to your login page without affecting the rest of your site.- Parameters:
updateRateBasedRuleRequest
-- Returns:
- Result of the UpdateRateBasedRule operation returned by the service.
- See Also:
-
-
updateRateBasedRule
default UpdateRateBasedRuleResponse updateRateBasedRule(Consumer<UpdateRateBasedRuleRequest.Builder> updateRateBasedRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes Predicate objects in a rule and updates the
RateLimit
in the rule.Each
Predicate
object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. TheRateLimit
specifies the number of requests every five minutes that triggers the rule.If you add more than one predicate to a
RateBasedRule
, a request must match all the predicates and exceed theRateLimit
to be counted or blocked. For example, suppose you add the following to aRateBasedRule
:-
An
IPSet
that matches the IP address192.0.2.44/32
-
A
ByteMatchSet
that matchesBadBot
in theUser-Agent
header
Further, you specify a
RateLimit
of 1,000.You then add the
RateBasedRule
to aWebACL
and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and theUser-Agent
header in the request must contain the valueBadBot
. Further, requests that match these two conditions much be received at a rate of more than 1,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests.As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a
RateBasedRule
:-
A
ByteMatchSet
withFieldToMatch
ofURI
-
A
PositionalConstraint
ofSTARTS_WITH
-
A
TargetString
oflogin
Further, you specify a
RateLimit
of 1,000.By adding this
RateBasedRule
to aWebACL
, you could limit requests to your login page without affecting the rest of your site.
This is a convenience which creates an instance of the
UpdateRateBasedRuleRequest.Builder
avoiding the need to create one manually viaUpdateRateBasedRuleRequest.builder()
- Parameters:
updateRateBasedRuleRequest
- AConsumer
that will call methods onUpdateRateBasedRuleRequest.Builder
to create a request.- Returns:
- Result of the UpdateRateBasedRule operation returned by the service.
- See Also:
-
-
updateRegexMatchSet
default UpdateRegexMatchSetResponse updateRegexMatchSet(UpdateRegexMatchSetRequest updateRegexMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, WafNonexistentItemException, WafNonexistentContainerException, WafInvalidOperationException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes RegexMatchTuple objects (filters) in a RegexMatchSet. For each
RegexMatchSetUpdate
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change a
RegexMatchSetUpdate
object, you delete the existing object and add a new one. -
The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the
User-Agent
header. -
The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet.
-
Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.
For example, you can create a
RegexPatternSet
that matches any requests withUser-Agent
headers that contain the stringB[a@]dB[o0]t
. You can then configure AWS WAF to reject those requests.To create and configure a
RegexMatchSet
, perform the following steps:-
Create a
RegexMatchSet.
For more information, see CreateRegexMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateRegexMatchSet
request. -
Submit an
UpdateRegexMatchSet
request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the identifier of theRegexPatternSet
that contain the regular expression patters you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateRegexMatchSetRequest
-- Returns:
- Result of the UpdateRegexMatchSet operation returned by the service.
- See Also:
-
-
updateRegexMatchSet
default UpdateRegexMatchSetResponse updateRegexMatchSet(Consumer<UpdateRegexMatchSetRequest.Builder> updateRegexMatchSetRequest) throws WafStaleDataException, WafInternalErrorException, WafDisallowedNameException, WafLimitsExceededException, WafNonexistentItemException, WafNonexistentContainerException, WafInvalidOperationException, WafInvalidAccountException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes RegexMatchTuple objects (filters) in a RegexMatchSet. For each
RegexMatchSetUpdate
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change a
RegexMatchSetUpdate
object, you delete the existing object and add a new one. -
The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the
User-Agent
header. -
The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet.
-
Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.
For example, you can create a
RegexPatternSet
that matches any requests withUser-Agent
headers that contain the stringB[a@]dB[o0]t
. You can then configure AWS WAF to reject those requests.To create and configure a
RegexMatchSet
, perform the following steps:-
Create a
RegexMatchSet.
For more information, see CreateRegexMatchSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateRegexMatchSet
request. -
Submit an
UpdateRegexMatchSet
request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the identifier of theRegexPatternSet
that contain the regular expression patters you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateRegexMatchSetRequest.Builder
avoiding the need to create one manually viaUpdateRegexMatchSetRequest.builder()
- Parameters:
updateRegexMatchSetRequest
- AConsumer
that will call methods onUpdateRegexMatchSetRequest.Builder
to create a request.- Returns:
- Result of the UpdateRegexMatchSet operation returned by the service.
- See Also:
-
-
updateRegexPatternSet
default UpdateRegexPatternSetResponse updateRegexPatternSet(UpdateRegexPatternSetRequest updateRegexPatternSetRequest) throws WafStaleDataException, WafInternalErrorException, WafLimitsExceededException, WafNonexistentItemException, WafNonexistentContainerException, WafInvalidOperationException, WafInvalidAccountException, WafInvalidRegexPatternException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes
RegexPatternString
objects in a RegexPatternSet. For eachRegexPatternString
object, you specify the following values:-
Whether to insert or delete the
RegexPatternString
. -
The regular expression pattern that you want to insert or delete. For more information, see RegexPatternSet.
For example, you can create a
RegexPatternString
such asB[a@]dB[o0]t
. AWS WAF will match thisRegexPatternString
to:-
BadBot
-
BadB0t
-
B@dBot
-
B@dB0t
To create and configure a
RegexPatternSet
, perform the following steps:-
Create a
RegexPatternSet.
For more information, see CreateRegexPatternSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateRegexPatternSet
request. -
Submit an
UpdateRegexPatternSet
request to specify the regular expression pattern that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateRegexPatternSetRequest
-- Returns:
- Result of the UpdateRegexPatternSet operation returned by the service.
- See Also:
-
-
updateRegexPatternSet
default UpdateRegexPatternSetResponse updateRegexPatternSet(Consumer<UpdateRegexPatternSetRequest.Builder> updateRegexPatternSetRequest) throws WafStaleDataException, WafInternalErrorException, WafLimitsExceededException, WafNonexistentItemException, WafNonexistentContainerException, WafInvalidOperationException, WafInvalidAccountException, WafInvalidRegexPatternException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes
RegexPatternString
objects in a RegexPatternSet. For eachRegexPatternString
object, you specify the following values:-
Whether to insert or delete the
RegexPatternString
. -
The regular expression pattern that you want to insert or delete. For more information, see RegexPatternSet.
For example, you can create a
RegexPatternString
such asB[a@]dB[o0]t
. AWS WAF will match thisRegexPatternString
to:-
BadBot
-
BadB0t
-
B@dBot
-
B@dB0t
To create and configure a
RegexPatternSet
, perform the following steps:-
Create a
RegexPatternSet.
For more information, see CreateRegexPatternSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateRegexPatternSet
request. -
Submit an
UpdateRegexPatternSet
request to specify the regular expression pattern that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateRegexPatternSetRequest.Builder
avoiding the need to create one manually viaUpdateRegexPatternSetRequest.builder()
- Parameters:
updateRegexPatternSetRequest
- AConsumer
that will call methods onUpdateRegexPatternSetRequest.Builder
to create a request.- Returns:
- Result of the UpdateRegexPatternSet operation returned by the service.
- See Also:
-
-
updateRule
default UpdateRuleResponse updateRule(UpdateRuleRequest updateRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes Predicate objects in a
Rule
. EachPredicate
object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to allow, block, or count. If you add more than one predicate to aRule
, a request must match all of the specifications to be allowed, blocked, or counted. For example, suppose that you add the following to aRule
:-
A
ByteMatchSet
that matches the valueBadBot
in theUser-Agent
header -
An
IPSet
that matches the IP address192.0.2.44
You then add the
Rule
to aWebACL
and specify that you want to block requests that satisfy theRule
. For a request to be blocked, theUser-Agent
header in the request must contain the valueBadBot
and the request must originate from the IP address 192.0.2.44.To create and configure a
Rule
, perform the following steps:-
Create and update the predicates that you want to include in the
Rule
. -
Create the
Rule
. See CreateRule. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRule request. -
Submit an
UpdateRule
request to add predicates to theRule
. -
Create and update a
WebACL
that contains theRule
. See CreateWebACL.
If you want to replace one
ByteMatchSet
orIPSet
with another, you delete the existing one and add the new one.For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateRuleRequest
-- Returns:
- Result of the UpdateRule operation returned by the service.
- See Also:
-
-
updateRule
default UpdateRuleResponse updateRule(Consumer<UpdateRuleRequest.Builder> updateRuleRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes Predicate objects in a
Rule
. EachPredicate
object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to allow, block, or count. If you add more than one predicate to aRule
, a request must match all of the specifications to be allowed, blocked, or counted. For example, suppose that you add the following to aRule
:-
A
ByteMatchSet
that matches the valueBadBot
in theUser-Agent
header -
An
IPSet
that matches the IP address192.0.2.44
You then add the
Rule
to aWebACL
and specify that you want to block requests that satisfy theRule
. For a request to be blocked, theUser-Agent
header in the request must contain the valueBadBot
and the request must originate from the IP address 192.0.2.44.To create and configure a
Rule
, perform the following steps:-
Create and update the predicates that you want to include in the
Rule
. -
Create the
Rule
. See CreateRule. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRule request. -
Submit an
UpdateRule
request to add predicates to theRule
. -
Create and update a
WebACL
that contains theRule
. See CreateWebACL.
If you want to replace one
ByteMatchSet
orIPSet
with another, you delete the existing one and add the new one.For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateRuleRequest.Builder
avoiding the need to create one manually viaUpdateRuleRequest.builder()
- Parameters:
updateRuleRequest
- AConsumer
that will call methods onUpdateRuleRequest.Builder
to create a request.- Returns:
- Result of the UpdateRule operation returned by the service.
- See Also:
-
-
updateRuleGroup
default UpdateRuleGroupResponse updateRuleGroup(UpdateRuleGroupRequest updateRuleGroupRequest) throws WafStaleDataException, WafInternalErrorException, WafNonexistentContainerException, WafNonexistentItemException, WafInvalidOperationException, WafLimitsExceededException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes ActivatedRule objects in a
RuleGroup
.You can only insert
REGULAR
rules into a rule group.You can have a maximum of ten rules per rule group.
To create and configure a
RuleGroup
, perform the following steps:-
Create and update the
Rules
that you want to include in theRuleGroup
. See CreateRule. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRuleGroup request. -
Submit an
UpdateRuleGroup
request to addRules
to theRuleGroup
. -
Create and update a
WebACL
that contains theRuleGroup
. See CreateWebACL.
If you want to replace one
Rule
with another, you delete the existing one and add the new one.For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateRuleGroupRequest
-- Returns:
- Result of the UpdateRuleGroup operation returned by the service.
- See Also:
-
-
updateRuleGroup
default UpdateRuleGroupResponse updateRuleGroup(Consumer<UpdateRuleGroupRequest.Builder> updateRuleGroupRequest) throws WafStaleDataException, WafInternalErrorException, WafNonexistentContainerException, WafNonexistentItemException, WafInvalidOperationException, WafLimitsExceededException, WafInvalidParameterException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes ActivatedRule objects in a
RuleGroup
.You can only insert
REGULAR
rules into a rule group.You can have a maximum of ten rules per rule group.
To create and configure a
RuleGroup
, perform the following steps:-
Create and update the
Rules
that you want to include in theRuleGroup
. See CreateRule. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateRuleGroup request. -
Submit an
UpdateRuleGroup
request to addRules
to theRuleGroup
. -
Create and update a
WebACL
that contains theRuleGroup
. See CreateWebACL.
If you want to replace one
Rule
with another, you delete the existing one and add the new one.For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateRuleGroupRequest.Builder
avoiding the need to create one manually viaUpdateRuleGroupRequest.builder()
- Parameters:
updateRuleGroupRequest
- AConsumer
that will call methods onUpdateRuleGroupRequest.Builder
to create a request.- Returns:
- Result of the UpdateRuleGroup operation returned by the service.
- See Also:
-
-
updateSizeConstraintSet
default UpdateSizeConstraintSetResponse updateSizeConstraintSet(UpdateSizeConstraintSetRequest updateSizeConstraintSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes SizeConstraint objects (filters) in a SizeConstraintSet. For each
SizeConstraint
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change a
SizeConstraintSetUpdate
object, you delete the existing object and add a new one. -
The part of a web request that you want AWS WAF to evaluate, such as the length of a query string or the length of the
User-Agent
header. -
Whether to perform any transformations on the request, such as converting it to lowercase, before checking its length. Note that transformations of the request body are not supported because the AWS resource forwards only the first
8192
bytes of your request to AWS WAF.You can only specify a single type of TextTransformation.
-
A
ComparisonOperator
used for evaluating the selected part of the request against the specifiedSize
, such as equals, greater than, less than, and so on. -
The length, in bytes, that you want AWS WAF to watch for in selected part of the request. The length is computed after applying the transformation.
For example, you can add a
SizeConstraintSetUpdate
object that matches web requests in which the length of theUser-Agent
header is greater than 100 bytes. You can then configure AWS WAF to block those requests.To create and configure a
SizeConstraintSet
, perform the following steps:-
Create a
SizeConstraintSet.
For more information, see CreateSizeConstraintSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateSizeConstraintSet
request. -
Submit an
UpdateSizeConstraintSet
request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateSizeConstraintSetRequest
-- Returns:
- Result of the UpdateSizeConstraintSet operation returned by the service.
- See Also:
-
-
updateSizeConstraintSet
default UpdateSizeConstraintSetResponse updateSizeConstraintSet(Consumer<UpdateSizeConstraintSetRequest.Builder> updateSizeConstraintSetRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes SizeConstraint objects (filters) in a SizeConstraintSet. For each
SizeConstraint
object, you specify the following values:-
Whether to insert or delete the object from the array. If you want to change a
SizeConstraintSetUpdate
object, you delete the existing object and add a new one. -
The part of a web request that you want AWS WAF to evaluate, such as the length of a query string or the length of the
User-Agent
header. -
Whether to perform any transformations on the request, such as converting it to lowercase, before checking its length. Note that transformations of the request body are not supported because the AWS resource forwards only the first
8192
bytes of your request to AWS WAF.You can only specify a single type of TextTransformation.
-
A
ComparisonOperator
used for evaluating the selected part of the request against the specifiedSize
, such as equals, greater than, less than, and so on. -
The length, in bytes, that you want AWS WAF to watch for in selected part of the request. The length is computed after applying the transformation.
For example, you can add a
SizeConstraintSetUpdate
object that matches web requests in which the length of theUser-Agent
header is greater than 100 bytes. You can then configure AWS WAF to block those requests.To create and configure a
SizeConstraintSet
, perform the following steps:-
Create a
SizeConstraintSet.
For more information, see CreateSizeConstraintSet. -
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of anUpdateSizeConstraintSet
request. -
Submit an
UpdateSizeConstraintSet
request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateSizeConstraintSetRequest.Builder
avoiding the need to create one manually viaUpdateSizeConstraintSetRequest.builder()
- Parameters:
updateSizeConstraintSetRequest
- AConsumer
that will call methods onUpdateSizeConstraintSetRequest.Builder
to create a request.- Returns:
- Result of the UpdateSizeConstraintSet operation returned by the service.
- See Also:
-
-
updateSqlInjectionMatchSet
default UpdateSqlInjectionMatchSetResponse updateSqlInjectionMatchSet(UpdateSqlInjectionMatchSetRequest updateSqlInjectionMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes SqlInjectionMatchTuple objects (filters) in a SqlInjectionMatchSet. For each
SqlInjectionMatchTuple
object, you specify the following values:-
Action
: Whether to insert the object into or delete the object from the array. To change aSqlInjectionMatchTuple
, you delete the existing object and add a new one. -
FieldToMatch
: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter. -
TextTransformation
: Which text transformation, if any, to perform on the web request before inspecting the request for snippets of malicious SQL code.You can only specify a single type of TextTransformation.
You use
SqlInjectionMatchSet
objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain snippets of SQL code in the query string and you want to block the requests, you can create aSqlInjectionMatchSet
with the applicable settings, and then configure AWS WAF to block the requests.To create and configure a
SqlInjectionMatchSet
, perform the following steps:-
Submit a CreateSqlInjectionMatchSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateSqlInjectionMatchSet
request to specify the parts of web requests that you want AWS WAF to inspect for snippets of SQL code.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateSqlInjectionMatchSetRequest
- A request to update a SqlInjectionMatchSet.- Returns:
- Result of the UpdateSqlInjectionMatchSet operation returned by the service.
- See Also:
-
-
updateSqlInjectionMatchSet
default UpdateSqlInjectionMatchSetResponse updateSqlInjectionMatchSet(Consumer<UpdateSqlInjectionMatchSetRequest.Builder> updateSqlInjectionMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes SqlInjectionMatchTuple objects (filters) in a SqlInjectionMatchSet. For each
SqlInjectionMatchTuple
object, you specify the following values:-
Action
: Whether to insert the object into or delete the object from the array. To change aSqlInjectionMatchTuple
, you delete the existing object and add a new one. -
FieldToMatch
: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter. -
TextTransformation
: Which text transformation, if any, to perform on the web request before inspecting the request for snippets of malicious SQL code.You can only specify a single type of TextTransformation.
You use
SqlInjectionMatchSet
objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain snippets of SQL code in the query string and you want to block the requests, you can create aSqlInjectionMatchSet
with the applicable settings, and then configure AWS WAF to block the requests.To create and configure a
SqlInjectionMatchSet
, perform the following steps:-
Submit a CreateSqlInjectionMatchSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateSqlInjectionMatchSet
request to specify the parts of web requests that you want AWS WAF to inspect for snippets of SQL code.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateSqlInjectionMatchSetRequest.Builder
avoiding the need to create one manually viaUpdateSqlInjectionMatchSetRequest.builder()
- Parameters:
updateSqlInjectionMatchSetRequest
- AConsumer
that will call methods onUpdateSqlInjectionMatchSetRequest.Builder
to create a request. A request to update a SqlInjectionMatchSet.- Returns:
- Result of the UpdateSqlInjectionMatchSet operation returned by the service.
- See Also:
-
-
updateWebACL
default UpdateWebAclResponse updateWebACL(UpdateWebAclRequest updateWebAclRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, WafSubscriptionNotFoundException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes ActivatedRule objects in a
WebACL
. EachRule
identifies web requests that you want to allow, block, or count. When you update aWebACL
, you specify the following values:-
A default action for the
WebACL
, eitherALLOW
orBLOCK
. AWS WAF performs the default action if a request doesn't match the criteria in any of theRules
in aWebACL
. -
The
Rules
that you want to add or delete. If you want to replace oneRule
with another, you delete the existingRule
and add the new one. -
For each
Rule
, whether you want AWS WAF to allow requests, block requests, or count requests that match the conditions in theRule
. -
The order in which you want AWS WAF to evaluate the
Rules
in aWebACL
. If you add more than oneRule
to aWebACL
, AWS WAF evaluates each request against theRules
in order based on the value ofPriority
. (TheRule
that has the lowest value forPriority
is evaluated first.) When a web request matches all the predicates (such asByteMatchSets
andIPSets
) in aRule
, AWS WAF immediately takes the corresponding action, allow or block, and doesn't evaluate the request against the remainingRules
in theWebACL
, if any.
To create and configure a
WebACL
, perform the following steps:-
Create and update the predicates that you want to include in
Rules
. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. -
Create and update the
Rules
that you want to include in theWebACL
. For more information, see CreateRule and UpdateRule. -
Create a
WebACL
. See CreateWebACL. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateWebACL request. -
Submit an
UpdateWebACL
request to specify theRules
that you want to include in theWebACL
, to specify the default action, and to associate theWebACL
with a CloudFront distribution.The
ActivatedRule
can be a rule group. If you specify a rule group as yourActivatedRule
, you can exclude specific rules from that rule group.If you already have a rule group associated with a web ACL and want to submit an
UpdateWebACL
request to exclude certain rules from that rule group, you must first remove the rule group from the web ACL, the re-insert it again, specifying the excluded rules. For details, see ActivatedRuleinvalid input: '$'ExcludedRules .
Be aware that if you try to add a RATE_BASED rule to a web ACL without setting the rule type when first creating the rule, the UpdateWebACL request will fail because the request tries to add a REGULAR rule (the default rule type) with the specified ID, which does not exist.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateWebAclRequest
-- Returns:
- Result of the UpdateWebACL operation returned by the service.
- See Also:
-
-
updateWebACL
default UpdateWebAclResponse updateWebACL(Consumer<UpdateWebAclRequest.Builder> updateWebAclRequest) throws WafStaleDataException, WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafReferencedItemException, WafLimitsExceededException, WafSubscriptionNotFoundException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes ActivatedRule objects in a
WebACL
. EachRule
identifies web requests that you want to allow, block, or count. When you update aWebACL
, you specify the following values:-
A default action for the
WebACL
, eitherALLOW
orBLOCK
. AWS WAF performs the default action if a request doesn't match the criteria in any of theRules
in aWebACL
. -
The
Rules
that you want to add or delete. If you want to replace oneRule
with another, you delete the existingRule
and add the new one. -
For each
Rule
, whether you want AWS WAF to allow requests, block requests, or count requests that match the conditions in theRule
. -
The order in which you want AWS WAF to evaluate the
Rules
in aWebACL
. If you add more than oneRule
to aWebACL
, AWS WAF evaluates each request against theRules
in order based on the value ofPriority
. (TheRule
that has the lowest value forPriority
is evaluated first.) When a web request matches all the predicates (such asByteMatchSets
andIPSets
) in aRule
, AWS WAF immediately takes the corresponding action, allow or block, and doesn't evaluate the request against the remainingRules
in theWebACL
, if any.
To create and configure a
WebACL
, perform the following steps:-
Create and update the predicates that you want to include in
Rules
. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. -
Create and update the
Rules
that you want to include in theWebACL
. For more information, see CreateRule and UpdateRule. -
Create a
WebACL
. See CreateWebACL. -
Use
GetChangeToken
to get the change token that you provide in theChangeToken
parameter of an UpdateWebACL request. -
Submit an
UpdateWebACL
request to specify theRules
that you want to include in theWebACL
, to specify the default action, and to associate theWebACL
with a CloudFront distribution.The
ActivatedRule
can be a rule group. If you specify a rule group as yourActivatedRule
, you can exclude specific rules from that rule group.If you already have a rule group associated with a web ACL and want to submit an
UpdateWebACL
request to exclude certain rules from that rule group, you must first remove the rule group from the web ACL, the re-insert it again, specifying the excluded rules. For details, see ActivatedRuleinvalid input: '$'ExcludedRules .
Be aware that if you try to add a RATE_BASED rule to a web ACL without setting the rule type when first creating the rule, the UpdateWebACL request will fail because the request tries to add a REGULAR rule (the default rule type) with the specified ID, which does not exist.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateWebAclRequest.Builder
avoiding the need to create one manually viaUpdateWebAclRequest.builder()
- Parameters:
updateWebAclRequest
- AConsumer
that will call methods onUpdateWebAclRequest.Builder
to create a request.- Returns:
- Result of the UpdateWebACL operation returned by the service.
- See Also:
-
-
updateXssMatchSet
default UpdateXssMatchSetResponse updateXssMatchSet(UpdateXssMatchSetRequest updateXssMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes XssMatchTuple objects (filters) in an XssMatchSet. For each
XssMatchTuple
object, you specify the following values:-
Action
: Whether to insert the object into or delete the object from the array. To change anXssMatchTuple
, you delete the existing object and add a new one. -
FieldToMatch
: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter. -
TextTransformation
: Which text transformation, if any, to perform on the web request before inspecting the request for cross-site scripting attacks.You can only specify a single type of TextTransformation.
You use
XssMatchSet
objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain cross-site scripting attacks in the request body and you want to block the requests, you can create anXssMatchSet
with the applicable settings, and then configure AWS WAF to block the requests.To create and configure an
XssMatchSet
, perform the following steps:-
Submit a CreateXssMatchSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateXssMatchSet
request to specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
- Parameters:
updateXssMatchSetRequest
- A request to update an XssMatchSet.- Returns:
- Result of the UpdateXssMatchSet operation returned by the service.
- See Also:
-
-
updateXssMatchSet
default UpdateXssMatchSetResponse updateXssMatchSet(Consumer<UpdateXssMatchSetRequest.Builder> updateXssMatchSetRequest) throws WafInternalErrorException, WafInvalidAccountException, WafInvalidOperationException, WafInvalidParameterException, WafNonexistentContainerException, WafNonexistentItemException, WafStaleDataException, WafLimitsExceededException, AwsServiceException, SdkClientException, WafException This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.
For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.
Inserts or deletes XssMatchTuple objects (filters) in an XssMatchSet. For each
XssMatchTuple
object, you specify the following values:-
Action
: Whether to insert the object into or delete the object from the array. To change anXssMatchTuple
, you delete the existing object and add a new one. -
FieldToMatch
: The part of web requests that you want AWS WAF to inspect and, if you want AWS WAF to inspect a header or custom query parameter, the name of the header or parameter. -
TextTransformation
: Which text transformation, if any, to perform on the web request before inspecting the request for cross-site scripting attacks.You can only specify a single type of TextTransformation.
You use
XssMatchSet
objects to specify which CloudFront requests that you want to allow, block, or count. For example, if you're receiving requests that contain cross-site scripting attacks in the request body and you want to block the requests, you can create anXssMatchSet
with the applicable settings, and then configure AWS WAF to block the requests.To create and configure an
XssMatchSet
, perform the following steps:-
Submit a CreateXssMatchSet request.
-
Use GetChangeToken to get the change token that you provide in the
ChangeToken
parameter of an UpdateIPSet request. -
Submit an
UpdateXssMatchSet
request to specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks.
For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.
This is a convenience which creates an instance of the
UpdateXssMatchSetRequest.Builder
avoiding the need to create one manually viaUpdateXssMatchSetRequest.builder()
- Parameters:
updateXssMatchSetRequest
- AConsumer
that will call methods onUpdateXssMatchSetRequest.Builder
to create a request. A request to update an XssMatchSet.- Returns:
- Result of the UpdateXssMatchSet operation returned by the service.
- See Also:
-
-
create
Create aWafRegionalClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
. -
builder
Create a builder that can be used to configure and create aWafRegionalClient
. -
serviceMetadata
-
serviceClientConfiguration
Description copied from interface:SdkClient
The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration- Specified by:
serviceClientConfiguration
in interfaceAwsClient
- Specified by:
serviceClientConfiguration
in interfaceSdkClient
- Returns:
- SdkServiceClientConfiguration
-