Class ProtocolDetails

java.lang.Object
software.amazon.awssdk.services.transfer.model.ProtocolDetails
All Implemented Interfaces:
Serializable, SdkPojo, ToCopyableBuilder<ProtocolDetails.Builder,ProtocolDetails>

@Generated("software.amazon.awssdk:codegen") public final class ProtocolDetails extends Object implements SdkPojo, Serializable, ToCopyableBuilder<ProtocolDetails.Builder,ProtocolDetails>

The protocol settings that are configured for your server.

See Also:
  • Method Details

    • passiveIp

      public final String passiveIp()

      Indicates passive mode, for FTP and FTPS protocols. Enter a single IPv4 address, such as the public IP address of a firewall, router, or load balancer. For example:

      aws transfer update-server --protocol-details PassiveIp=0.0.0.0

      Replace 0.0.0.0 in the example above with the actual IP address you want to use.

      If you change the PassiveIp value, you must stop and then restart your Transfer Family server for the change to take effect. For details on using passive mode (PASV) in a NAT environment, see Configuring your FTPS server behind a firewall or NAT with Transfer Family.

      Special values

      The AUTO and 0.0.0.0 are special values for the PassiveIp parameter. The value PassiveIp=AUTO is assigned by default to FTP and FTPS type servers. In this case, the server automatically responds with one of the endpoint IPs within the PASV response. PassiveIp=0.0.0.0 has a more unique application for its usage. For example, if you have a High Availability (HA) Network Load Balancer (NLB) environment, where you have 3 subnets, you can only specify a single IP address using the PassiveIp parameter. This reduces the effectiveness of having High Availability. In this case, you can specify PassiveIp=0.0.0.0. This tells the client to use the same IP address as the Control connection and utilize all AZs for their connections. Note, however, that not all FTP clients support the PassiveIp=0.0.0.0 response. FileZilla and WinSCP do support it. If you are using other clients, check to see if your client supports the PassiveIp=0.0.0.0 response.

      Returns:
      Indicates passive mode, for FTP and FTPS protocols. Enter a single IPv4 address, such as the public IP address of a firewall, router, or load balancer. For example:

      aws transfer update-server --protocol-details PassiveIp=0.0.0.0

      Replace 0.0.0.0 in the example above with the actual IP address you want to use.

      If you change the PassiveIp value, you must stop and then restart your Transfer Family server for the change to take effect. For details on using passive mode (PASV) in a NAT environment, see Configuring your FTPS server behind a firewall or NAT with Transfer Family.

      Special values

      The AUTO and 0.0.0.0 are special values for the PassiveIp parameter. The value PassiveIp=AUTO is assigned by default to FTP and FTPS type servers. In this case, the server automatically responds with one of the endpoint IPs within the PASV response. PassiveIp=0.0.0.0 has a more unique application for its usage. For example, if you have a High Availability (HA) Network Load Balancer (NLB) environment, where you have 3 subnets, you can only specify a single IP address using the PassiveIp parameter. This reduces the effectiveness of having High Availability. In this case, you can specify PassiveIp=0.0.0.0. This tells the client to use the same IP address as the Control connection and utilize all AZs for their connections. Note, however, that not all FTP clients support the PassiveIp=0.0.0.0 response. FileZilla and WinSCP do support it. If you are using other clients, check to see if your client supports the PassiveIp=0.0.0.0 response.

    • tlsSessionResumptionMode

      public final TlsSessionResumptionMode tlsSessionResumptionMode()

      A property used with Transfer Family servers that use the FTPS protocol. TLS Session Resumption provides a mechanism to resume or share a negotiated secret key between the control and data connection for an FTPS session. TlsSessionResumptionMode determines whether or not the server resumes recent, negotiated sessions through a unique session ID. This property is available during CreateServer and UpdateServer calls. If a TlsSessionResumptionMode value is not specified during CreateServer, it is set to ENFORCED by default.

      • DISABLED: the server does not process TLS session resumption client requests and creates a new TLS session for each request.

      • ENABLED: the server processes and accepts clients that are performing TLS session resumption. The server doesn't reject client data connections that do not perform the TLS session resumption client processing.

      • ENFORCED: the server processes and accepts clients that are performing TLS session resumption. The server rejects client data connections that do not perform the TLS session resumption client processing. Before you set the value to ENFORCED, test your clients.

        Not all FTPS clients perform TLS session resumption. So, if you choose to enforce TLS session resumption, you prevent any connections from FTPS clients that don't perform the protocol negotiation. To determine whether or not you can use the ENFORCED value, you need to test your clients.

      If the service returns an enum value that is not available in the current SDK version, tlsSessionResumptionMode will return TlsSessionResumptionMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from tlsSessionResumptionModeAsString().

      Returns:
      A property used with Transfer Family servers that use the FTPS protocol. TLS Session Resumption provides a mechanism to resume or share a negotiated secret key between the control and data connection for an FTPS session. TlsSessionResumptionMode determines whether or not the server resumes recent, negotiated sessions through a unique session ID. This property is available during CreateServer and UpdateServer calls. If a TlsSessionResumptionMode value is not specified during CreateServer, it is set to ENFORCED by default.

      • DISABLED: the server does not process TLS session resumption client requests and creates a new TLS session for each request.

      • ENABLED: the server processes and accepts clients that are performing TLS session resumption. The server doesn't reject client data connections that do not perform the TLS session resumption client processing.

      • ENFORCED: the server processes and accepts clients that are performing TLS session resumption. The server rejects client data connections that do not perform the TLS session resumption client processing. Before you set the value to ENFORCED, test your clients.

        Not all FTPS clients perform TLS session resumption. So, if you choose to enforce TLS session resumption, you prevent any connections from FTPS clients that don't perform the protocol negotiation. To determine whether or not you can use the ENFORCED value, you need to test your clients.

      See Also:
    • tlsSessionResumptionModeAsString

      public final String tlsSessionResumptionModeAsString()

      A property used with Transfer Family servers that use the FTPS protocol. TLS Session Resumption provides a mechanism to resume or share a negotiated secret key between the control and data connection for an FTPS session. TlsSessionResumptionMode determines whether or not the server resumes recent, negotiated sessions through a unique session ID. This property is available during CreateServer and UpdateServer calls. If a TlsSessionResumptionMode value is not specified during CreateServer, it is set to ENFORCED by default.

      • DISABLED: the server does not process TLS session resumption client requests and creates a new TLS session for each request.

      • ENABLED: the server processes and accepts clients that are performing TLS session resumption. The server doesn't reject client data connections that do not perform the TLS session resumption client processing.

      • ENFORCED: the server processes and accepts clients that are performing TLS session resumption. The server rejects client data connections that do not perform the TLS session resumption client processing. Before you set the value to ENFORCED, test your clients.

        Not all FTPS clients perform TLS session resumption. So, if you choose to enforce TLS session resumption, you prevent any connections from FTPS clients that don't perform the protocol negotiation. To determine whether or not you can use the ENFORCED value, you need to test your clients.

      If the service returns an enum value that is not available in the current SDK version, tlsSessionResumptionMode will return TlsSessionResumptionMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from tlsSessionResumptionModeAsString().

      Returns:
      A property used with Transfer Family servers that use the FTPS protocol. TLS Session Resumption provides a mechanism to resume or share a negotiated secret key between the control and data connection for an FTPS session. TlsSessionResumptionMode determines whether or not the server resumes recent, negotiated sessions through a unique session ID. This property is available during CreateServer and UpdateServer calls. If a TlsSessionResumptionMode value is not specified during CreateServer, it is set to ENFORCED by default.

      • DISABLED: the server does not process TLS session resumption client requests and creates a new TLS session for each request.

      • ENABLED: the server processes and accepts clients that are performing TLS session resumption. The server doesn't reject client data connections that do not perform the TLS session resumption client processing.

      • ENFORCED: the server processes and accepts clients that are performing TLS session resumption. The server rejects client data connections that do not perform the TLS session resumption client processing. Before you set the value to ENFORCED, test your clients.

        Not all FTPS clients perform TLS session resumption. So, if you choose to enforce TLS session resumption, you prevent any connections from FTPS clients that don't perform the protocol negotiation. To determine whether or not you can use the ENFORCED value, you need to test your clients.

      See Also:
    • setStatOption

      public final SetStatOption setStatOption()

      Use the SetStatOption to ignore the error that is generated when the client attempts to use SETSTAT on a file you are uploading to an S3 bucket.

      Some SFTP file transfer clients can attempt to change the attributes of remote files, including timestamp and permissions, using commands, such as SETSTAT when uploading the file. However, these commands are not compatible with object storage systems, such as Amazon S3. Due to this incompatibility, file uploads from these clients can result in errors even when the file is otherwise successfully uploaded.

      Set the value to ENABLE_NO_OP to have the Transfer Family server ignore the SETSTAT command, and upload files without needing to make any changes to your SFTP client. While the SetStatOption ENABLE_NO_OP setting ignores the error, it does generate a log entry in Amazon CloudWatch Logs, so you can determine when the client is making a SETSTAT call.

      If you want to preserve the original timestamp for your file, and modify other file attributes using SETSTAT, you can use Amazon EFS as backend storage with Transfer Family.

      If the service returns an enum value that is not available in the current SDK version, setStatOption will return SetStatOption.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from setStatOptionAsString().

      Returns:
      Use the SetStatOption to ignore the error that is generated when the client attempts to use SETSTAT on a file you are uploading to an S3 bucket.

      Some SFTP file transfer clients can attempt to change the attributes of remote files, including timestamp and permissions, using commands, such as SETSTAT when uploading the file. However, these commands are not compatible with object storage systems, such as Amazon S3. Due to this incompatibility, file uploads from these clients can result in errors even when the file is otherwise successfully uploaded.

      Set the value to ENABLE_NO_OP to have the Transfer Family server ignore the SETSTAT command, and upload files without needing to make any changes to your SFTP client. While the SetStatOption ENABLE_NO_OP setting ignores the error, it does generate a log entry in Amazon CloudWatch Logs, so you can determine when the client is making a SETSTAT call.

      If you want to preserve the original timestamp for your file, and modify other file attributes using SETSTAT, you can use Amazon EFS as backend storage with Transfer Family.

      See Also:
    • setStatOptionAsString

      public final String setStatOptionAsString()

      Use the SetStatOption to ignore the error that is generated when the client attempts to use SETSTAT on a file you are uploading to an S3 bucket.

      Some SFTP file transfer clients can attempt to change the attributes of remote files, including timestamp and permissions, using commands, such as SETSTAT when uploading the file. However, these commands are not compatible with object storage systems, such as Amazon S3. Due to this incompatibility, file uploads from these clients can result in errors even when the file is otherwise successfully uploaded.

      Set the value to ENABLE_NO_OP to have the Transfer Family server ignore the SETSTAT command, and upload files without needing to make any changes to your SFTP client. While the SetStatOption ENABLE_NO_OP setting ignores the error, it does generate a log entry in Amazon CloudWatch Logs, so you can determine when the client is making a SETSTAT call.

      If you want to preserve the original timestamp for your file, and modify other file attributes using SETSTAT, you can use Amazon EFS as backend storage with Transfer Family.

      If the service returns an enum value that is not available in the current SDK version, setStatOption will return SetStatOption.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from setStatOptionAsString().

      Returns:
      Use the SetStatOption to ignore the error that is generated when the client attempts to use SETSTAT on a file you are uploading to an S3 bucket.

      Some SFTP file transfer clients can attempt to change the attributes of remote files, including timestamp and permissions, using commands, such as SETSTAT when uploading the file. However, these commands are not compatible with object storage systems, such as Amazon S3. Due to this incompatibility, file uploads from these clients can result in errors even when the file is otherwise successfully uploaded.

      Set the value to ENABLE_NO_OP to have the Transfer Family server ignore the SETSTAT command, and upload files without needing to make any changes to your SFTP client. While the SetStatOption ENABLE_NO_OP setting ignores the error, it does generate a log entry in Amazon CloudWatch Logs, so you can determine when the client is making a SETSTAT call.

      If you want to preserve the original timestamp for your file, and modify other file attributes using SETSTAT, you can use Amazon EFS as backend storage with Transfer Family.

      See Also:
    • as2Transports

      public final List<As2Transport> as2Transports()

      Indicates the transport method for the AS2 messages. Currently, only HTTP is supported.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasAs2Transports() method.

      Returns:
      Indicates the transport method for the AS2 messages. Currently, only HTTP is supported.
    • hasAs2Transports

      public final boolean hasAs2Transports()
      For responses, this returns true if the service returned a value for the As2Transports property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • as2TransportsAsStrings

      public final List<String> as2TransportsAsStrings()

      Indicates the transport method for the AS2 messages. Currently, only HTTP is supported.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasAs2Transports() method.

      Returns:
      Indicates the transport method for the AS2 messages. Currently, only HTTP is supported.
    • toBuilder

      public ProtocolDetails.Builder toBuilder()
      Description copied from interface: ToCopyableBuilder
      Take this object and create a builder that contains all of the current property values of this object.
      Specified by:
      toBuilder in interface ToCopyableBuilder<ProtocolDetails.Builder,ProtocolDetails>
      Returns:
      a builder for type T
    • builder

      public static ProtocolDetails.Builder builder()
    • serializableBuilderClass

      public static Class<? extends ProtocolDetails.Builder> serializableBuilderClass()
    • hashCode

      public final int hashCode()
      Overrides:
      hashCode in class Object
    • equals

      public final boolean equals(Object obj)
      Overrides:
      equals in class Object
    • equalsBySdkFields

      public final boolean equalsBySdkFields(Object obj)
      Description copied from interface: SdkPojo
      Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in an SdkPojo class, and is generated based on a service model.

      If an SdkPojo class does not have any inherited fields, equalsBySdkFields and equals are essentially the same.

      Specified by:
      equalsBySdkFields in interface SdkPojo
      Parameters:
      obj - the object to be compared with
      Returns:
      true if the other object equals to this object by sdk fields, false otherwise.
    • toString

      public final String toString()
      Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
      Overrides:
      toString in class Object
    • getValueForField

      public final <T> Optional<T> getValueForField(String fieldName, Class<T> clazz)
    • sdkFields

      public final List<SdkField<?>> sdkFields()
      Specified by:
      sdkFields in interface SdkPojo
      Returns:
      List of SdkField in this POJO. May be empty list but should never be null.