public static interface UpdateAssociationRequest.Builder extends SsmRequest.Builder, SdkPojo, CopyableBuilder<UpdateAssociationRequest.Builder,UpdateAssociationRequest>
| Modifier and Type | Method and Description |
|---|---|
UpdateAssociationRequest.Builder |
applyOnlyAtCronInterval(Boolean applyOnlyAtCronInterval)
By default, when you update an association, the system runs it immediately after it is updated and then
according to the schedule you specified.
|
UpdateAssociationRequest.Builder |
associationId(String associationId)
The ID of the association you want to update.
|
UpdateAssociationRequest.Builder |
associationName(String associationName)
The name of the association that you want to update.
|
UpdateAssociationRequest.Builder |
associationVersion(String associationVersion)
This parameter is provided for concurrency control purposes.
|
UpdateAssociationRequest.Builder |
automationTargetParameterName(String automationTargetParameterName)
Specify the target for the association.
|
UpdateAssociationRequest.Builder |
calendarNames(Collection<String> calendarNames)
The names or Amazon Resource Names (ARNs) of the Systems Manager Change Calendar type documents you want to
gate your associations under.
|
UpdateAssociationRequest.Builder |
calendarNames(String... calendarNames)
The names or Amazon Resource Names (ARNs) of the Systems Manager Change Calendar type documents you want to
gate your associations under.
|
UpdateAssociationRequest.Builder |
complianceSeverity(AssociationComplianceSeverity complianceSeverity)
The severity level to assign to the association.
|
UpdateAssociationRequest.Builder |
complianceSeverity(String complianceSeverity)
The severity level to assign to the association.
|
UpdateAssociationRequest.Builder |
documentVersion(String documentVersion)
The document version you want update for the association.
|
UpdateAssociationRequest.Builder |
maxConcurrency(String maxConcurrency)
The maximum number of targets allowed to run the association at the same time.
|
UpdateAssociationRequest.Builder |
maxErrors(String maxErrors)
The number of errors that are allowed before the system stops sending requests to run the association on
additional targets.
|
UpdateAssociationRequest.Builder |
name(String name)
The name of the SSM document that contains the configuration information for the instance.
|
default UpdateAssociationRequest.Builder |
outputLocation(Consumer<InstanceAssociationOutputLocation.Builder> outputLocation)
An S3 bucket where you want to store the results of this request.
|
UpdateAssociationRequest.Builder |
outputLocation(InstanceAssociationOutputLocation outputLocation)
An S3 bucket where you want to store the results of this request.
|
UpdateAssociationRequest.Builder |
overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
Add an optional request override configuration.
|
UpdateAssociationRequest.Builder |
overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
Add an optional request override configuration.
|
UpdateAssociationRequest.Builder |
parameters(Map<String,? extends Collection<String>> parameters)
The parameters you want to update for the association.
|
UpdateAssociationRequest.Builder |
scheduleExpression(String scheduleExpression)
The cron expression used to schedule the association that you want to update.
|
UpdateAssociationRequest.Builder |
syncCompliance(AssociationSyncCompliance syncCompliance)
The mode for generating association compliance.
|
UpdateAssociationRequest.Builder |
syncCompliance(String syncCompliance)
The mode for generating association compliance.
|
UpdateAssociationRequest.Builder |
targetLocations(Collection<TargetLocation> targetLocations)
A location is a combination of AWS Regions and AWS accounts where you want to run the association.
|
UpdateAssociationRequest.Builder |
targetLocations(Consumer<TargetLocation.Builder>... targetLocations)
A location is a combination of AWS Regions and AWS accounts where you want to run the association.
|
UpdateAssociationRequest.Builder |
targetLocations(TargetLocation... targetLocations)
A location is a combination of AWS Regions and AWS accounts where you want to run the association.
|
UpdateAssociationRequest.Builder |
targets(Collection<Target> targets)
The targets of the association.
|
UpdateAssociationRequest.Builder |
targets(Consumer<Target.Builder>... targets)
The targets of the association.
|
UpdateAssociationRequest.Builder |
targets(Target... targets)
The targets of the association.
|
buildoverrideConfigurationequalsBySdkFields, sdkFieldscopyapplyMutation, buildUpdateAssociationRequest.Builder associationId(String associationId)
The ID of the association you want to update.
associationId - The ID of the association you want to update.UpdateAssociationRequest.Builder parameters(Map<String,? extends Collection<String>> parameters)
The parameters you want to update for the association. If you create a parameter using Parameter Store, you can reference the parameter using {{ssm:parameter-name}}
parameters - The parameters you want to update for the association. If you create a parameter using Parameter
Store, you can reference the parameter using {{ssm:parameter-name}}UpdateAssociationRequest.Builder documentVersion(String documentVersion)
The document version you want update for the association.
documentVersion - The document version you want update for the association.UpdateAssociationRequest.Builder scheduleExpression(String scheduleExpression)
The cron expression used to schedule the association that you want to update.
scheduleExpression - The cron expression used to schedule the association that you want to update.UpdateAssociationRequest.Builder outputLocation(InstanceAssociationOutputLocation outputLocation)
An S3 bucket where you want to store the results of this request.
outputLocation - An S3 bucket where you want to store the results of this request.default UpdateAssociationRequest.Builder outputLocation(Consumer<InstanceAssociationOutputLocation.Builder> outputLocation)
An S3 bucket where you want to store the results of this request.
This is a convenience that creates an instance of theInstanceAssociationOutputLocation.Builder
avoiding the need to create one manually via InstanceAssociationOutputLocation.builder().
When the Consumer completes, SdkBuilder.build() is called
immediately and its result is passed to outputLocation(InstanceAssociationOutputLocation).outputLocation - a consumer that will call methods on InstanceAssociationOutputLocation.BuilderoutputLocation(InstanceAssociationOutputLocation)UpdateAssociationRequest.Builder name(String name)
The name of the SSM document that contains the configuration information for the instance. You can specify Command or Automation documents.
You can specify AWS-predefined documents, documents you created, or a document that is shared with you from another account.
For SSM documents that are shared with you from other AWS accounts, you must specify the complete SSM document ARN, in the following format:
arn:aws:ssm:region:account-id:document/document-name
For example:
arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document
For AWS-predefined documents and SSM documents you created in your account, you only need to specify the
document name. For example, AWS-ApplyPatchBaseline or My-Document.
name - The name of the SSM document that contains the configuration information for the instance. You can
specify Command or Automation documents.
You can specify AWS-predefined documents, documents you created, or a document that is shared with you from another account.
For SSM documents that are shared with you from other AWS accounts, you must specify the complete SSM document ARN, in the following format:
arn:aws:ssm:region:account-id:document/document-name
For example:
arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document
For AWS-predefined documents and SSM documents you created in your account, you only need to specify
the document name. For example, AWS-ApplyPatchBaseline or My-Document.
UpdateAssociationRequest.Builder targets(Collection<Target> targets)
The targets of the association.
targets - The targets of the association.UpdateAssociationRequest.Builder targets(Target... targets)
The targets of the association.
targets - The targets of the association.UpdateAssociationRequest.Builder targets(Consumer<Target.Builder>... targets)
The targets of the association.
This is a convenience that creates an instance of theList.Builder avoiding the need to
create one manually via List#builder() .
When the Consumer completes, List.Builder#build() is called immediately and its
result is passed to #targets(List) .targets - a consumer that will call methods on List.Builder #targets(List) UpdateAssociationRequest.Builder associationName(String associationName)
The name of the association that you want to update.
associationName - The name of the association that you want to update.UpdateAssociationRequest.Builder associationVersion(String associationVersion)
This parameter is provided for concurrency control purposes. You must specify the latest association version
in the service. If you want to ensure that this request succeeds, either specify $LATEST, or
omit this parameter.
associationVersion - This parameter is provided for concurrency control purposes. You must specify the latest association
version in the service. If you want to ensure that this request succeeds, either specify
$LATEST, or omit this parameter.UpdateAssociationRequest.Builder automationTargetParameterName(String automationTargetParameterName)
Specify the target for the association. This target is required for associations that use an Automation document and target resources by using rate controls.
automationTargetParameterName - Specify the target for the association. This target is required for associations that use an
Automation document and target resources by using rate controls.UpdateAssociationRequest.Builder maxErrors(String maxErrors)
The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 instances and set MaxError to 10%, then the system stops sending the request when the sixth error is received.
Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
maxErrors - The number of errors that are allowed before the system stops sending requests to run the association
on additional targets. You can specify either an absolute number of errors, for example 10, or a
percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending
requests when the fourth error is received. If you specify 0, then the system stops sending requests
after the first error is returned. If you run an association on 50 instances and set MaxError to 10%,
then the system stops sending the request when the sixth error is received.
Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.
UpdateAssociationRequest.Builder maxConcurrency(String maxConcurrency)
The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
If a new instance starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new instance will process its association within the limit specified for MaxConcurrency.
maxConcurrency - The maximum number of targets allowed to run the association at the same time. You can specify a
number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%,
which means all targets run the association at the same time.
If a new instance starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new instance will process its association within the limit specified for MaxConcurrency.
UpdateAssociationRequest.Builder complianceSeverity(String complianceSeverity)
The severity level to assign to the association.
complianceSeverity - The severity level to assign to the association.AssociationComplianceSeverity,
AssociationComplianceSeverityUpdateAssociationRequest.Builder complianceSeverity(AssociationComplianceSeverity complianceSeverity)
The severity level to assign to the association.
complianceSeverity - The severity level to assign to the association.AssociationComplianceSeverity,
AssociationComplianceSeverityUpdateAssociationRequest.Builder syncCompliance(String syncCompliance)
The mode for generating association compliance. You can specify AUTO or MANUAL. In
AUTO mode, the system uses the status of the association execution to determine the compliance
status. If the association execution runs successfully, then the association is COMPLIANT. If
the association execution doesn't run successfully, the association is NON-COMPLIANT.
In MANUAL mode, you must specify the AssociationId as a parameter for the
PutComplianceItems API action. In this case, compliance data is not managed by State Manager. It is
managed by your direct call to the PutComplianceItems API action.
By default, all associations use AUTO mode.
syncCompliance - The mode for generating association compliance. You can specify AUTO or
MANUAL. In AUTO mode, the system uses the status of the association
execution to determine the compliance status. If the association execution runs successfully, then the
association is COMPLIANT. If the association execution doesn't run successfully, the
association is NON-COMPLIANT.
In MANUAL mode, you must specify the AssociationId as a parameter for the
PutComplianceItems API action. In this case, compliance data is not managed by State Manager.
It is managed by your direct call to the PutComplianceItems API action.
By default, all associations use AUTO mode.
AssociationSyncCompliance,
AssociationSyncComplianceUpdateAssociationRequest.Builder syncCompliance(AssociationSyncCompliance syncCompliance)
The mode for generating association compliance. You can specify AUTO or MANUAL. In
AUTO mode, the system uses the status of the association execution to determine the compliance
status. If the association execution runs successfully, then the association is COMPLIANT. If
the association execution doesn't run successfully, the association is NON-COMPLIANT.
In MANUAL mode, you must specify the AssociationId as a parameter for the
PutComplianceItems API action. In this case, compliance data is not managed by State Manager. It is
managed by your direct call to the PutComplianceItems API action.
By default, all associations use AUTO mode.
syncCompliance - The mode for generating association compliance. You can specify AUTO or
MANUAL. In AUTO mode, the system uses the status of the association
execution to determine the compliance status. If the association execution runs successfully, then the
association is COMPLIANT. If the association execution doesn't run successfully, the
association is NON-COMPLIANT.
In MANUAL mode, you must specify the AssociationId as a parameter for the
PutComplianceItems API action. In this case, compliance data is not managed by State Manager.
It is managed by your direct call to the PutComplianceItems API action.
By default, all associations use AUTO mode.
AssociationSyncCompliance,
AssociationSyncComplianceUpdateAssociationRequest.Builder applyOnlyAtCronInterval(Boolean applyOnlyAtCronInterval)
By default, when you update an association, the system runs it immediately after it is updated and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you update it. This parameter is not supported for rate expressions.
Also, if you specified this option when you created the association, you can reset it. To do so, specify the
no-apply-only-at-cron-interval parameter when you update the association from the command line.
This parameter forces the association to run immediately after updating it and according to the interval
specified.
applyOnlyAtCronInterval - By default, when you update an association, the system runs it immediately after it is updated and
then according to the schedule you specified. Specify this option if you don't want an association to
run immediately after you update it. This parameter is not supported for rate expressions.
Also, if you specified this option when you created the association, you can reset it. To do so,
specify the no-apply-only-at-cron-interval parameter when you update the association from
the command line. This parameter forces the association to run immediately after updating it and
according to the interval specified.
UpdateAssociationRequest.Builder calendarNames(Collection<String> calendarNames)
The names or Amazon Resource Names (ARNs) of the Systems Manager Change Calendar type documents you want to gate your associations under. The associations only run when that Change Calendar is open. For more information, see AWS Systems Manager Change Calendar.
calendarNames - The names or Amazon Resource Names (ARNs) of the Systems Manager Change Calendar type documents you
want to gate your associations under. The associations only run when that Change Calendar is open. For
more information, see AWS Systems Manager Change Calendar.UpdateAssociationRequest.Builder calendarNames(String... calendarNames)
The names or Amazon Resource Names (ARNs) of the Systems Manager Change Calendar type documents you want to gate your associations under. The associations only run when that Change Calendar is open. For more information, see AWS Systems Manager Change Calendar.
calendarNames - The names or Amazon Resource Names (ARNs) of the Systems Manager Change Calendar type documents you
want to gate your associations under. The associations only run when that Change Calendar is open. For
more information, see AWS Systems Manager Change Calendar.UpdateAssociationRequest.Builder targetLocations(Collection<TargetLocation> targetLocations)
A location is a combination of AWS Regions and AWS accounts where you want to run the association. Use this action to update an association in multiple Regions and multiple accounts.
targetLocations - A location is a combination of AWS Regions and AWS accounts where you want to run the association. Use
this action to update an association in multiple Regions and multiple accounts.UpdateAssociationRequest.Builder targetLocations(TargetLocation... targetLocations)
A location is a combination of AWS Regions and AWS accounts where you want to run the association. Use this action to update an association in multiple Regions and multiple accounts.
targetLocations - A location is a combination of AWS Regions and AWS accounts where you want to run the association. Use
this action to update an association in multiple Regions and multiple accounts.UpdateAssociationRequest.Builder targetLocations(Consumer<TargetLocation.Builder>... targetLocations)
A location is a combination of AWS Regions and AWS accounts where you want to run the association. Use this action to update an association in multiple Regions and multiple accounts.
This is a convenience that creates an instance of theList.Builder avoiding the need
to create one manually via List#builder() .
When the Consumer completes, List.Builder#build() is called immediately and
its result is passed to #targetLocations(List) .targetLocations - a consumer that will call methods on List.Builder #targetLocations(List) UpdateAssociationRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
AwsRequest.BuilderoverrideConfiguration in interface AwsRequest.BuilderoverrideConfiguration - The override configuration.UpdateAssociationRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
AwsRequest.BuilderoverrideConfiguration in interface AwsRequest.BuilderbuilderConsumer - A Consumer to which an empty AwsRequestOverrideConfiguration.Builder will be
given.