Class CreateAssociationRequest
- All Implemented Interfaces:
SdkPojo
,ToCopyableBuilder<CreateAssociationRequest.Builder,
CreateAssociationRequest>
-
Nested Class Summary
-
Method Summary
Modifier and TypeMethodDescriptionfinal AlarmConfiguration
Returns the value of the AlarmConfiguration property for this object.final Boolean
By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified.final String
Specify a descriptive name for the association.final String
Choose the parameter that will define how your automation will branch out.builder()
The names or Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under.The severity level to assign to the association.final String
The severity level to assign to the association.final String
The document version you want to associate with the targets.final Integer
duration()
The number of hours the association can run before it is canceled.final boolean
final boolean
equalsBySdkFields
(Object obj) Indicates whether some other object is "equal to" this one by SDK fields.final <T> Optional
<T> getValueForField
(String fieldName, Class<T> clazz) Used to retrieve the value of a field from any class that extendsSdkRequest
.final boolean
For responses, this returns true if the service returned a value for the CalendarNames property.final int
hashCode()
final boolean
For responses, this returns true if the service returned a value for the Parameters property.final boolean
hasTags()
For responses, this returns true if the service returned a value for the Tags property.final boolean
For responses, this returns true if the service returned a value for the TargetLocations property.final boolean
For responses, this returns true if the service returned a value for the TargetMaps property.final boolean
For responses, this returns true if the service returned a value for the Targets property.final String
The managed node ID.final String
The maximum number of targets allowed to run the association at the same time.final String
The number of errors that are allowed before the system stops sending requests to run the association on additional targets.final String
name()
The name of the SSM Command document or Automation runbook that contains the configuration information for the managed node.An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.The parameters for the runtime configuration of the document.final String
A cron expression when the association will be applied to the targets.final Integer
Number of days to wait after the scheduled day to run an association.static Class
<? extends CreateAssociationRequest.Builder> The mode for generating association compliance.final String
The mode for generating association compliance.tags()
Adds or overwrites one or more tags for a State Manager association.final List
<TargetLocation> A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association.A key-value mapping of document parameters to target resources.targets()
The targets for the association.Take this object and create a builder that contains all of the current property values of this object.final String
toString()
Returns a string representation of this object.Methods inherited from class software.amazon.awssdk.awscore.AwsRequest
overrideConfiguration
Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder
copy
-
Method Details
-
name
The name of the SSM Command document or Automation runbook that contains the configuration information for the managed node.
You can specify Amazon Web Services-predefined documents, documents you created, or a document that is shared with you from another Amazon Web Services account.
For Systems Manager documents (SSM documents) that are shared with you from other Amazon Web Services accounts, you must specify the complete SSM document ARN, in the following format:
arn:partition:ssm:region:account-id:document/document-name
For example:
arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document
For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example,
AWS-ApplyPatchBaseline
orMy-Document
.- Returns:
- The name of the SSM Command document or Automation runbook that contains the configuration information
for the managed node.
You can specify Amazon Web Services-predefined documents, documents you created, or a document that is shared with you from another Amazon Web Services account.
For Systems Manager documents (SSM documents) that are shared with you from other Amazon Web Services accounts, you must specify the complete SSM document ARN, in the following format:
arn:partition:ssm:region:account-id:document/document-name
For example:
arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document
For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need to specify the document name. For example,
AWS-ApplyPatchBaseline
orMy-Document
.
-
documentVersion
The document version you want to associate with the targets. Can be a specific version or the default version.
State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the
default
version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version todefault
.- Returns:
- The document version you want to associate with the targets. Can be a specific version or the default
version.
State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the
default
version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version todefault
.
-
instanceId
The managed node ID.
InstanceId
has been deprecated. To specify a managed node ID for an association, use theTargets
parameter. Requests that include the parameterInstanceID
with Systems Manager documents (SSM documents) that use schema version 2.0 or later will fail. In addition, if you use the parameterInstanceId
, you can't use the parametersAssociationName
,DocumentVersion
,MaxErrors
,MaxConcurrency
,OutputLocation
, orScheduleExpression
. To use these parameters, you must use theTargets
parameter.- Returns:
- The managed node ID.
InstanceId
has been deprecated. To specify a managed node ID for an association, use theTargets
parameter. Requests that include the parameterInstanceID
with Systems Manager documents (SSM documents) that use schema version 2.0 or later will fail. In addition, if you use the parameterInstanceId
, you can't use the parametersAssociationName
,DocumentVersion
,MaxErrors
,MaxConcurrency
,OutputLocation
, orScheduleExpression
. To use these parameters, you must use theTargets
parameter.
-
hasParameters
public final boolean hasParameters()For responses, this returns true if the service returned a value for the Parameters property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
parameters
The parameters for the runtime configuration of the document.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasParameters()
method.- Returns:
- The parameters for the runtime configuration of the document.
-
hasTargets
public final boolean hasTargets()For responses, this returns true if the service returned a value for the Targets property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
targets
The targets for the association. You can target managed nodes by using tags, Amazon Web Services resource groups, all managed nodes in an Amazon Web Services account, or individual managed node IDs. You can target all managed nodes in an Amazon Web Services account by specifying the
InstanceIds
key with a value of*
. For more information about choosing targets for an association, see About targets and rate controls in State Manager associations in the Amazon Web Services Systems Manager User Guide.Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasTargets()
method.- Returns:
- The targets for the association. You can target managed nodes by using tags, Amazon Web Services resource
groups, all managed nodes in an Amazon Web Services account, or individual managed node IDs. You can
target all managed nodes in an Amazon Web Services account by specifying the
InstanceIds
key with a value of*
. For more information about choosing targets for an association, see About targets and rate controls in State Manager associations in the Amazon Web Services Systems Manager User Guide.
-
scheduleExpression
A cron expression when the association will be applied to the targets.
- Returns:
- A cron expression when the association will be applied to the targets.
-
outputLocation
An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.
- Returns:
- An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.
-
associationName
Specify a descriptive name for the association.
- Returns:
- Specify a descriptive name for the association.
-
automationTargetParameterName
Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a capability of Amazon Web Services Systems Manager.
- Returns:
- Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a capability of Amazon Web Services Systems Manager.
-
maxErrors
The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set
MaxError
to 10%, then the system stops sending the request when the sixth error is received.Executions that are already running an association when
MaxErrors
is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, setMaxConcurrency
to 1 so that executions proceed one at a time.- Returns:
- The number of errors that are allowed before the system stops sending requests to run the association on
additional targets. You can specify either an absolute number of errors, for example 10, or a percentage
of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when
the fourth error is received. If you specify 0, then the system stops sending requests after the first
error is returned. If you run an association on 50 managed nodes and set
MaxError
to 10%, then the system stops sending the request when the sixth error is received.Executions that are already running an association when
MaxErrors
is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, setMaxConcurrency
to 1 so that executions proceed one at a time.
-
maxConcurrency
The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.
If a new managed node starts and attempts to run an association while Systems Manager is running
MaxConcurrency
associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified forMaxConcurrency
.- Returns:
- The maximum number of targets allowed to run the association at the same time. You can specify a number,
for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which
means all targets run the association at the same time.
If a new managed node starts and attempts to run an association while Systems Manager is running
MaxConcurrency
associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified forMaxConcurrency
.
-
complianceSeverity
The severity level to assign to the association.
If the service returns an enum value that is not available in the current SDK version,
complianceSeverity
will returnAssociationComplianceSeverity.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromcomplianceSeverityAsString()
.- Returns:
- The severity level to assign to the association.
- See Also:
-
complianceSeverityAsString
The severity level to assign to the association.
If the service returns an enum value that is not available in the current SDK version,
complianceSeverity
will returnAssociationComplianceSeverity.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromcomplianceSeverityAsString()
.- Returns:
- The severity level to assign to the association.
- See Also:
-
syncCompliance
The mode for generating association compliance. You can specify
AUTO
orMANUAL
. InAUTO
mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association isCOMPLIANT
. If the association execution doesn't run successfully, the association isNON-COMPLIANT
.In
MANUAL
mode, you must specify theAssociationId
as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the PutComplianceItems API operation.By default, all associations use
AUTO
mode.If the service returns an enum value that is not available in the current SDK version,
syncCompliance
will returnAssociationSyncCompliance.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsyncComplianceAsString()
.- Returns:
- The mode for generating association compliance. You can specify
AUTO
orMANUAL
. InAUTO
mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association isCOMPLIANT
. If the association execution doesn't run successfully, the association isNON-COMPLIANT
.In
MANUAL
mode, you must specify theAssociationId
as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the PutComplianceItems API operation.By default, all associations use
AUTO
mode. - See Also:
-
syncComplianceAsString
The mode for generating association compliance. You can specify
AUTO
orMANUAL
. InAUTO
mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association isCOMPLIANT
. If the association execution doesn't run successfully, the association isNON-COMPLIANT
.In
MANUAL
mode, you must specify theAssociationId
as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the PutComplianceItems API operation.By default, all associations use
AUTO
mode.If the service returns an enum value that is not available in the current SDK version,
syncCompliance
will returnAssociationSyncCompliance.UNKNOWN_TO_SDK_VERSION
. The raw value returned by the service is available fromsyncComplianceAsString()
.- Returns:
- The mode for generating association compliance. You can specify
AUTO
orMANUAL
. InAUTO
mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association isCOMPLIANT
. If the association execution doesn't run successfully, the association isNON-COMPLIANT
.In
MANUAL
mode, you must specify theAssociationId
as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager. It is managed by your direct call to the PutComplianceItems API operation.By default, all associations use
AUTO
mode. - See Also:
-
applyOnlyAtCronInterval
By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
- Returns:
- By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.
-
hasCalendarNames
public final boolean hasCalendarNames()For responses, this returns true if the service returned a value for the CalendarNames property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
calendarNames
The names or Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under. The associations only run when that change calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasCalendarNames()
method.- Returns:
- The names or Amazon Resource Names (ARNs) of the Change Calendar type documents you want to gate your associations under. The associations only run when that change calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.
-
hasTargetLocations
public final boolean hasTargetLocations()For responses, this returns true if the service returned a value for the TargetLocations property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
targetLocations
A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association. Use this action to create an association in multiple Regions and multiple accounts.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasTargetLocations()
method.- Returns:
- A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association. Use this action to create an association in multiple Regions and multiple accounts.
-
scheduleOffset
Number of days to wait after the scheduled day to run an association. For example, if you specified a cron schedule of
cron(0 0 ? * THU#2 *)
, you could specify an offset of 3 to run the association each Sunday after the second Thursday of the month. For more information about cron schedules for associations, see Reference: Cron and rate expressions for Systems Manager in the Amazon Web Services Systems Manager User Guide.To use offsets, you must specify the
ApplyOnlyAtCronInterval
parameter. This option tells the system not to run an association immediately after you create it.- Returns:
- Number of days to wait after the scheduled day to run an association. For example, if you specified a
cron schedule of
cron(0 0 ? * THU#2 *)
, you could specify an offset of 3 to run the association each Sunday after the second Thursday of the month. For more information about cron schedules for associations, see Reference: Cron and rate expressions for Systems Manager in the Amazon Web Services Systems Manager User Guide.To use offsets, you must specify the
ApplyOnlyAtCronInterval
parameter. This option tells the system not to run an association immediately after you create it.
-
duration
The number of hours the association can run before it is canceled. Duration applies to associations that are currently running, and any pending and in progress commands on all targets. If a target was taken offline for the association to run, it is made available again immediately, without a reboot.
The
Duration
parameter applies only when both these conditions are true:-
The association for which you specify a duration is cancelable according to the parameters of the SSM command document or Automation runbook associated with this execution.
-
The command specifies the
ApplyOnlyAtCronInterval
parameter, which means that the association doesn't run immediately after it is created, but only according to the specified schedule.
- Returns:
- The number of hours the association can run before it is canceled. Duration applies to associations that
are currently running, and any pending and in progress commands on all targets. If a target was taken
offline for the association to run, it is made available again immediately, without a reboot.
The
Duration
parameter applies only when both these conditions are true:-
The association for which you specify a duration is cancelable according to the parameters of the SSM command document or Automation runbook associated with this execution.
-
The command specifies the
ApplyOnlyAtCronInterval
parameter, which means that the association doesn't run immediately after it is created, but only according to the specified schedule.
-
-
-
hasTargetMaps
public final boolean hasTargetMaps()For responses, this returns true if the service returned a value for the TargetMaps property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
targetMaps
A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasTargetMaps()
method.- Returns:
- A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.
-
hasTags
public final boolean hasTags()For responses, this returns true if the service returned a value for the Tags property. This DOES NOT check that the value is non-empty (for which, you should check theisEmpty()
method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified. -
tags
Adds or overwrites one or more tags for a State Manager association. Tags are metadata that you can assign to your Amazon Web Services resources. Tags enable you to categorize your resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value, both of which you define.
Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.
This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the
hasTags()
method.- Returns:
- Adds or overwrites one or more tags for a State Manager association. Tags are metadata that you can assign to your Amazon Web Services resources. Tags enable you to categorize your resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value, both of which you define.
-
alarmConfiguration
Returns the value of the AlarmConfiguration property for this object.- Returns:
- The value of the AlarmConfiguration property for this object.
-
toBuilder
Description copied from interface:ToCopyableBuilder
Take this object and create a builder that contains all of the current property values of this object.- Specified by:
toBuilder
in interfaceToCopyableBuilder<CreateAssociationRequest.Builder,
CreateAssociationRequest> - Specified by:
toBuilder
in classSsmRequest
- Returns:
- a builder for type T
-
builder
-
serializableBuilderClass
-
hashCode
public final int hashCode()- Overrides:
hashCode
in classAwsRequest
-
equals
- Overrides:
equals
in classAwsRequest
-
equalsBySdkFields
Description copied from interface:SdkPojo
Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in anSdkPojo
class, and is generated based on a service model.If an
SdkPojo
class does not have any inherited fields,equalsBySdkFields
andequals
are essentially the same.- Specified by:
equalsBySdkFields
in interfaceSdkPojo
- Parameters:
obj
- the object to be compared with- Returns:
- true if the other object equals to this object by sdk fields, false otherwise.
-
toString
Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value. -
getValueForField
Description copied from class:SdkRequest
Used to retrieve the value of a field from any class that extendsSdkRequest
. The field name specified should match the member name from the corresponding service-2.json model specified in the codegen-resources folder for a given service. The class specifies what class to cast the returned value to. If the returned value is also a modeled class, theSdkRequest.getValueForField(String, Class)
method will again be available.- Overrides:
getValueForField
in classSdkRequest
- Parameters:
fieldName
- The name of the member to be retrieved.clazz
- The class to cast the returned object to.- Returns:
- Optional containing the casted return value
-
sdkFields
-