Class SendMessageBatchRequestEntry

java.lang.Object
software.amazon.awssdk.services.sqs.model.SendMessageBatchRequestEntry
All Implemented Interfaces:
Serializable, SdkPojo, ToCopyableBuilder<SendMessageBatchRequestEntry.Builder,SendMessageBatchRequestEntry>

@Generated("software.amazon.awssdk:codegen") public final class SendMessageBatchRequestEntry extends Object implements SdkPojo, Serializable, ToCopyableBuilder<SendMessageBatchRequestEntry.Builder,SendMessageBatchRequestEntry>

Contains the details of a single Amazon SQS message along with an Id.

See Also:
  • Method Details

    • id

      public final String id()

      An identifier for a message in this batch used to communicate the result.

      The Ids of a batch request need to be unique within a request.

      This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).

      Returns:
      An identifier for a message in this batch used to communicate the result.

      The Ids of a batch request need to be unique within a request.

      This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).

    • messageBody

      public final String messageBody()

      The body of the message.

      Returns:
      The body of the message.
    • delaySeconds

      public final Integer delaySeconds()

      The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue is applied.

      When you set FifoQueue, you can't set DelaySeconds per message. You can set this parameter only on a queue level.

      Returns:
      The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue is applied.

      When you set FifoQueue, you can't set DelaySeconds per message. You can set this parameter only on a queue level.

    • hasMessageAttributes

      public final boolean hasMessageAttributes()
      For responses, this returns true if the service returned a value for the MessageAttributes property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • messageAttributes

      public final Map<String,MessageAttributeValue> messageAttributes()

      Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasMessageAttributes() method.

      Returns:
      Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.
    • messageSystemAttributes

      public final Map<MessageSystemAttributeNameForSends,MessageSystemAttributeValue> messageSystemAttributes()

      The message system attribute to send Each message system attribute consists of a Name, Type, and Value.

      • Currently, the only supported message system attribute is AWSTraceHeader. Its type must be String and its value must be a correctly formatted X-Ray trace header string.

      • The size of a message system attribute doesn't count towards the total size of a message.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasMessageSystemAttributes() method.

      Returns:
      The message system attribute to send Each message system attribute consists of a Name, Type, and Value.

      • Currently, the only supported message system attribute is AWSTraceHeader. Its type must be String and its value must be a correctly formatted X-Ray trace header string.

      • The size of a message system attribute doesn't count towards the total size of a message.

    • hasMessageSystemAttributes

      public final boolean hasMessageSystemAttributes()
      For responses, this returns true if the service returned a value for the MessageSystemAttributes property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • messageSystemAttributesAsStrings

      public final Map<String,MessageSystemAttributeValue> messageSystemAttributesAsStrings()

      The message system attribute to send Each message system attribute consists of a Name, Type, and Value.

      • Currently, the only supported message system attribute is AWSTraceHeader. Its type must be String and its value must be a correctly formatted X-Ray trace header string.

      • The size of a message system attribute doesn't count towards the total size of a message.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasMessageSystemAttributes() method.

      Returns:
      The message system attribute to send Each message system attribute consists of a Name, Type, and Value.

      • Currently, the only supported message system attribute is AWSTraceHeader. Its type must be String and its value must be a correctly formatted X-Ray trace header string.

      • The size of a message system attribute doesn't count towards the total size of a message.

    • messageDeduplicationId

      public final String messageDeduplicationId()

      This parameter applies only to FIFO (first-in-first-out) queues.

      The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.

      • Every message must have a unique MessageDeduplicationId,

        • You may provide a MessageDeduplicationId explicitly.

        • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).

        • If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.

        • If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.

      • When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.

      • If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

      The MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues).

      If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.

      Amazon SQS continues to keep track of the message deduplication ID even after the message is received and deleted.

      The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation ( !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

      For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.

      Returns:
      This parameter applies only to FIFO (first-in-first-out) queues.

      The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.

      • Every message must have a unique MessageDeduplicationId,

        • You may provide a MessageDeduplicationId explicitly.

        • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).

        • If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.

        • If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.

      • When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.

      • If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

      The MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues).

      If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.

      Amazon SQS continues to keep track of the message deduplication ID even after the message is received and deleted.

      The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

      For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.

    • messageGroupId

      public final String messageGroupId()

      This parameter applies only to FIFO (first-in-first-out) queues.

      The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion.

      • You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.

      • ReceiveMessage might return messages with multiple MessageGroupId values. For each MessageGroupId, the messages are sorted by time sent. The caller can't specify a MessageGroupId.

      The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

      For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.

      MessageGroupId is required for FIFO queues. You can't use it for Standard queues.

      Returns:
      This parameter applies only to FIFO (first-in-first-out) queues.

      The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion.

      • You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.

      • ReceiveMessage might return messages with multiple MessageGroupId values. For each MessageGroupId, the messages are sorted by time sent. The caller can't specify a MessageGroupId.

      The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

      For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.

      MessageGroupId is required for FIFO queues. You can't use it for Standard queues.

    • toBuilder

      Description copied from interface: ToCopyableBuilder
      Take this object and create a builder that contains all of the current property values of this object.
      Specified by:
      toBuilder in interface ToCopyableBuilder<SendMessageBatchRequestEntry.Builder,SendMessageBatchRequestEntry>
      Returns:
      a builder for type T
    • builder

      public static SendMessageBatchRequestEntry.Builder builder()
    • serializableBuilderClass

      public static Class<? extends SendMessageBatchRequestEntry.Builder> serializableBuilderClass()
    • hashCode

      public final int hashCode()
      Overrides:
      hashCode in class Object
    • equals

      public final boolean equals(Object obj)
      Overrides:
      equals in class Object
    • equalsBySdkFields

      public final boolean equalsBySdkFields(Object obj)
      Description copied from interface: SdkPojo
      Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in an SdkPojo class, and is generated based on a service model.

      If an SdkPojo class does not have any inherited fields, equalsBySdkFields and equals are essentially the same.

      Specified by:
      equalsBySdkFields in interface SdkPojo
      Parameters:
      obj - the object to be compared with
      Returns:
      true if the other object equals to this object by sdk fields, false otherwise.
    • toString

      public final String toString()
      Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
      Overrides:
      toString in class Object
    • getValueForField

      public final <T> Optional<T> getValueForField(String fieldName, Class<T> clazz)
    • sdkFields

      public final List<SdkField<?>> sdkFields()
      Specified by:
      sdkFields in interface SdkPojo
      Returns:
      List of SdkField in this POJO. May be empty list but should never be null.