Interface UpdateResolverEndpointRequest.Builder
- All Superinterfaces:
AwsRequest.Builder
,Buildable
,CopyableBuilder<UpdateResolverEndpointRequest.Builder,
,UpdateResolverEndpointRequest> Route53ResolverRequest.Builder
,SdkBuilder<UpdateResolverEndpointRequest.Builder,
,UpdateResolverEndpointRequest> SdkPojo
,SdkRequest.Builder
- Enclosing class:
UpdateResolverEndpointRequest
-
Method Summary
Modifier and TypeMethodDescriptionThe name of the Resolver endpoint that you want to update.overrideConfiguration
(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer) Add an optional request override configuration.overrideConfiguration
(AwsRequestOverrideConfiguration overrideConfiguration) Add an optional request override configuration.protocols
(Collection<Protocol> protocols) The protocols you want to use for the endpoint.The protocols you want to use for the endpoint.protocolsWithStrings
(String... protocols) The protocols you want to use for the endpoint.protocolsWithStrings
(Collection<String> protocols) The protocols you want to use for the endpoint.resolverEndpointId
(String resolverEndpointId) The ID of the Resolver endpoint that you want to update.resolverEndpointType
(String resolverEndpointType) Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.resolverEndpointType
(ResolverEndpointType resolverEndpointType) Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.updateIpAddresses
(Collection<UpdateIpAddress> updateIpAddresses) Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack.updateIpAddresses
(Consumer<UpdateIpAddress.Builder>... updateIpAddresses) Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack.updateIpAddresses
(UpdateIpAddress... updateIpAddresses) Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack.Methods inherited from interface software.amazon.awssdk.awscore.AwsRequest.Builder
overrideConfiguration
Methods inherited from interface software.amazon.awssdk.utils.builder.CopyableBuilder
copy
Methods inherited from interface software.amazon.awssdk.services.route53resolver.model.Route53ResolverRequest.Builder
build
Methods inherited from interface software.amazon.awssdk.utils.builder.SdkBuilder
applyMutation, build
Methods inherited from interface software.amazon.awssdk.core.SdkPojo
equalsBySdkFields, sdkFields
-
Method Details
-
resolverEndpointId
The ID of the Resolver endpoint that you want to update.
- Parameters:
resolverEndpointId
- The ID of the Resolver endpoint that you want to update.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
name
The name of the Resolver endpoint that you want to update.
- Parameters:
name
- The name of the Resolver endpoint that you want to update.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
resolverEndpointType
Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.
Updating to
IPV6
type isn't currently supported.- Parameters:
resolverEndpointType
- Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.Updating to
IPV6
type isn't currently supported.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
resolverEndpointType
UpdateResolverEndpointRequest.Builder resolverEndpointType(ResolverEndpointType resolverEndpointType) Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.
Updating to
IPV6
type isn't currently supported.- Parameters:
resolverEndpointType
- Specifies the endpoint type for what type of IP address the endpoint uses to forward DNS queries.Updating to
IPV6
type isn't currently supported.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
updateIpAddresses
UpdateResolverEndpointRequest.Builder updateIpAddresses(Collection<UpdateIpAddress> updateIpAddresses) Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.
- Parameters:
updateIpAddresses
- Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
updateIpAddresses
Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.
- Parameters:
updateIpAddresses
- Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
updateIpAddresses
UpdateResolverEndpointRequest.Builder updateIpAddresses(Consumer<UpdateIpAddress.Builder>... updateIpAddresses) Specifies the IPv6 address when you update the Resolver endpoint from IPv4 to dual-stack. If you don't specify an IPv6 address, one will be automatically chosen from your subnet.
This is a convenience method that creates an instance of theUpdateIpAddress.Builder
avoiding the need to create one manually viaUpdateIpAddress.builder()
.When the
Consumer
completes,SdkBuilder.build()
is called immediately and its result is passed toupdateIpAddresses(List<UpdateIpAddress>)
.- Parameters:
updateIpAddresses
- a consumer that will call methods onUpdateIpAddress.Builder
- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
protocolsWithStrings
The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
- Parameters:
protocols
- The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
-
- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
-
protocolsWithStrings
The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
- Parameters:
protocols
- The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
-
- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
-
protocols
The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
- Parameters:
protocols
- The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
-
- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
-
protocols
The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
- Parameters:
protocols
- The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.For an inbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 and DoH-FIPS in combination.
-
Do53 alone.
-
DoH alone.
-
DoH-FIPS alone.
-
None, which is treated as Do53.
For an outbound endpoint you can apply the protocols as follows:
-
Do53 and DoH in combination.
-
Do53 alone.
-
DoH alone.
-
None, which is treated as Do53.
You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS. This is to prevent a sudden disruption to incoming traffic that relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic has transferred to using the DoH protocol, or DoH-FIPS, and then remove the Do53.
-
- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
-
overrideConfiguration
UpdateResolverEndpointRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration) Description copied from interface:AwsRequest.Builder
Add an optional request override configuration.- Specified by:
overrideConfiguration
in interfaceAwsRequest.Builder
- Parameters:
overrideConfiguration
- The override configuration.- Returns:
- This object for method chaining.
-
overrideConfiguration
UpdateResolverEndpointRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer) Description copied from interface:AwsRequest.Builder
Add an optional request override configuration.- Specified by:
overrideConfiguration
in interfaceAwsRequest.Builder
- Parameters:
builderConsumer
- AConsumer
to which an emptyAwsRequestOverrideConfiguration.Builder
will be given.- Returns:
- This object for method chaining.
-