Interface NetworkFirewallAsyncClient
- All Superinterfaces:
AutoCloseable
,AwsClient
,SdkAutoCloseable
,SdkClient
builder()
method.The asynchronous client performs non-blocking I/O when configured with any
invalid reference
SdkAsyncHttpClient
This is the API Reference for Network Firewall. This guide is for developers who need detailed information about the Network Firewall API actions, data types, and errors.
-
The REST API requires you to handle connection details, such as calculating signatures, handling request retries, and error handling. For general information about using the Amazon Web Services REST APIs, see Amazon Web Services APIs.
To access Network Firewall using the REST API endpoint:
https://network-firewall.<region>.amazonaws.com
-
Alternatively, you can use one of the Amazon Web Services SDKs to access an API that's tailored to the programming language or platform that you're using. For more information, see Amazon Web Services SDKs.
-
For descriptions of Network Firewall features, including and step-by-step instructions on how to use them through the Network Firewall console, see the Network Firewall Developer Guide.
Network Firewall is a stateful, managed, network firewall and intrusion detection and prevention service for Amazon Virtual Private Cloud (Amazon VPC). With Network Firewall, you can filter traffic at the perimeter of your VPC. This includes filtering traffic going to and coming from an internet gateway, NAT gateway, or over VPN or Direct Connect. Network Firewall uses rules that are compatible with Suricata, a free, open source network analysis and threat detection engine. Network Firewall supports Suricata version 6.0.9. For information about Suricata, see the Suricata website.
You can use Network Firewall to monitor and protect your VPC traffic in a number of ways. The following are just a few examples:
-
Allow domains or IP addresses for known Amazon Web Services service endpoints, such as Amazon S3, and block all other forms of traffic.
-
Use custom lists of known bad domains to limit the types of domain names that your applications can access.
-
Perform deep packet inspection on traffic entering or leaving your VPC.
-
Use stateful protocol detection to filter protocols like HTTPS, regardless of the port used.
To enable Network Firewall for your VPCs, you perform steps in both Amazon VPC and in Network Firewall. For information about using Amazon VPC, see Amazon VPC User Guide.
To start using Network Firewall, do the following:
-
(Optional) If you don't already have a VPC that you want to protect, create it in Amazon VPC.
-
In Amazon VPC, in each Availability Zone where you want to have a firewall endpoint, create a subnet for the sole use of Network Firewall.
-
In Network Firewall, create stateless and stateful rule groups, to define the components of the network traffic filtering behavior that you want your firewall to have.
-
In Network Firewall, create a firewall policy that uses your rule groups and specifies additional default traffic filtering behavior.
-
In Network Firewall, create a firewall and specify your new firewall policy and VPC subnets. Network Firewall creates a firewall endpoint in each subnet that you specify, with the behavior that's defined in the firewall policy.
-
In Amazon VPC, use ingress routing enhancements to route traffic through the new firewall endpoints.
-
Field Summary
Modifier and TypeFieldDescriptionstatic final String
Value for looking up the service's metadata from theServiceMetadataProvider
.static final String
-
Method Summary
Modifier and TypeMethodDescriptionassociateFirewallPolicy
(Consumer<AssociateFirewallPolicyRequest.Builder> associateFirewallPolicyRequest) Associates a FirewallPolicy to a Firewall.associateFirewallPolicy
(AssociateFirewallPolicyRequest associateFirewallPolicyRequest) Associates a FirewallPolicy to a Firewall.associateSubnets
(Consumer<AssociateSubnetsRequest.Builder> associateSubnetsRequest) Associates the specified subnets in the Amazon VPC to the firewall.associateSubnets
(AssociateSubnetsRequest associateSubnetsRequest) Associates the specified subnets in the Amazon VPC to the firewall.builder()
Create a builder that can be used to configure and create aNetworkFirewallAsyncClient
.static NetworkFirewallAsyncClient
create()
Create aNetworkFirewallAsyncClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
.default CompletableFuture
<CreateFirewallResponse> createFirewall
(Consumer<CreateFirewallRequest.Builder> createFirewallRequest) Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.default CompletableFuture
<CreateFirewallResponse> createFirewall
(CreateFirewallRequest createFirewallRequest) Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.createFirewallPolicy
(Consumer<CreateFirewallPolicyRequest.Builder> createFirewallPolicyRequest) Creates the firewall policy for the firewall according to the specifications.createFirewallPolicy
(CreateFirewallPolicyRequest createFirewallPolicyRequest) Creates the firewall policy for the firewall according to the specifications.default CompletableFuture
<CreateRuleGroupResponse> createRuleGroup
(Consumer<CreateRuleGroupRequest.Builder> createRuleGroupRequest) Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.default CompletableFuture
<CreateRuleGroupResponse> createRuleGroup
(CreateRuleGroupRequest createRuleGroupRequest) Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.createTLSInspectionConfiguration
(Consumer<CreateTlsInspectionConfigurationRequest.Builder> createTlsInspectionConfigurationRequest) Creates an Network Firewall TLS inspection configuration.createTLSInspectionConfiguration
(CreateTlsInspectionConfigurationRequest createTlsInspectionConfigurationRequest) Creates an Network Firewall TLS inspection configuration.default CompletableFuture
<DeleteFirewallResponse> deleteFirewall
(Consumer<DeleteFirewallRequest.Builder> deleteFirewallRequest) Deletes the specified Firewall and its FirewallStatus.default CompletableFuture
<DeleteFirewallResponse> deleteFirewall
(DeleteFirewallRequest deleteFirewallRequest) Deletes the specified Firewall and its FirewallStatus.deleteFirewallPolicy
(Consumer<DeleteFirewallPolicyRequest.Builder> deleteFirewallPolicyRequest) Deletes the specified FirewallPolicy.deleteFirewallPolicy
(DeleteFirewallPolicyRequest deleteFirewallPolicyRequest) Deletes the specified FirewallPolicy.deleteResourcePolicy
(Consumer<DeleteResourcePolicyRequest.Builder> deleteResourcePolicyRequest) Deletes a resource policy that you created in a PutResourcePolicy request.deleteResourcePolicy
(DeleteResourcePolicyRequest deleteResourcePolicyRequest) Deletes a resource policy that you created in a PutResourcePolicy request.default CompletableFuture
<DeleteRuleGroupResponse> deleteRuleGroup
(Consumer<DeleteRuleGroupRequest.Builder> deleteRuleGroupRequest) Deletes the specified RuleGroup.default CompletableFuture
<DeleteRuleGroupResponse> deleteRuleGroup
(DeleteRuleGroupRequest deleteRuleGroupRequest) Deletes the specified RuleGroup.deleteTLSInspectionConfiguration
(Consumer<DeleteTlsInspectionConfigurationRequest.Builder> deleteTlsInspectionConfigurationRequest) Deletes the specified TLSInspectionConfiguration.deleteTLSInspectionConfiguration
(DeleteTlsInspectionConfigurationRequest deleteTlsInspectionConfigurationRequest) Deletes the specified TLSInspectionConfiguration.describeFirewall
(Consumer<DescribeFirewallRequest.Builder> describeFirewallRequest) Returns the data objects for the specified firewall.describeFirewall
(DescribeFirewallRequest describeFirewallRequest) Returns the data objects for the specified firewall.describeFirewallPolicy
(Consumer<DescribeFirewallPolicyRequest.Builder> describeFirewallPolicyRequest) Returns the data objects for the specified firewall policy.describeFirewallPolicy
(DescribeFirewallPolicyRequest describeFirewallPolicyRequest) Returns the data objects for the specified firewall policy.describeLoggingConfiguration
(Consumer<DescribeLoggingConfigurationRequest.Builder> describeLoggingConfigurationRequest) Returns the logging configuration for the specified firewall.describeLoggingConfiguration
(DescribeLoggingConfigurationRequest describeLoggingConfigurationRequest) Returns the logging configuration for the specified firewall.describeResourcePolicy
(Consumer<DescribeResourcePolicyRequest.Builder> describeResourcePolicyRequest) Retrieves a resource policy that you created in a PutResourcePolicy request.describeResourcePolicy
(DescribeResourcePolicyRequest describeResourcePolicyRequest) Retrieves a resource policy that you created in a PutResourcePolicy request.describeRuleGroup
(Consumer<DescribeRuleGroupRequest.Builder> describeRuleGroupRequest) Returns the data objects for the specified rule group.describeRuleGroup
(DescribeRuleGroupRequest describeRuleGroupRequest) Returns the data objects for the specified rule group.describeRuleGroupMetadata
(Consumer<DescribeRuleGroupMetadataRequest.Builder> describeRuleGroupMetadataRequest) High-level information about a rule group, returned by operations like create and describe.describeRuleGroupMetadata
(DescribeRuleGroupMetadataRequest describeRuleGroupMetadataRequest) High-level information about a rule group, returned by operations like create and describe.describeTLSInspectionConfiguration
(Consumer<DescribeTlsInspectionConfigurationRequest.Builder> describeTlsInspectionConfigurationRequest) Returns the data objects for the specified TLS inspection configuration.describeTLSInspectionConfiguration
(DescribeTlsInspectionConfigurationRequest describeTlsInspectionConfigurationRequest) Returns the data objects for the specified TLS inspection configuration.disassociateSubnets
(Consumer<DisassociateSubnetsRequest.Builder> disassociateSubnetsRequest) Removes the specified subnet associations from the firewall.disassociateSubnets
(DisassociateSubnetsRequest disassociateSubnetsRequest) Removes the specified subnet associations from the firewall.listFirewallPolicies
(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest) Retrieves the metadata for the firewall policies that you have defined.listFirewallPolicies
(ListFirewallPoliciesRequest listFirewallPoliciesRequest) Retrieves the metadata for the firewall policies that you have defined.default ListFirewallPoliciesPublisher
listFirewallPoliciesPaginator
(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest) This is a variant oflistFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest)
operation.default ListFirewallPoliciesPublisher
listFirewallPoliciesPaginator
(ListFirewallPoliciesRequest listFirewallPoliciesRequest) This is a variant oflistFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest)
operation.default CompletableFuture
<ListFirewallsResponse> listFirewalls
(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest) Retrieves the metadata for the firewalls that you have defined.default CompletableFuture
<ListFirewallsResponse> listFirewalls
(ListFirewallsRequest listFirewallsRequest) Retrieves the metadata for the firewalls that you have defined.default ListFirewallsPublisher
listFirewallsPaginator
(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest) This is a variant oflistFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest)
operation.default ListFirewallsPublisher
listFirewallsPaginator
(ListFirewallsRequest listFirewallsRequest) This is a variant oflistFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest)
operation.default CompletableFuture
<ListRuleGroupsResponse> listRuleGroups
(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest) Retrieves the metadata for the rule groups that you have defined.default CompletableFuture
<ListRuleGroupsResponse> listRuleGroups
(ListRuleGroupsRequest listRuleGroupsRequest) Retrieves the metadata for the rule groups that you have defined.default ListRuleGroupsPublisher
listRuleGroupsPaginator
(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest) This is a variant oflistRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest)
operation.default ListRuleGroupsPublisher
listRuleGroupsPaginator
(ListRuleGroupsRequest listRuleGroupsRequest) This is a variant oflistRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest)
operation.listTagsForResource
(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) Retrieves the tags associated with the specified resource.listTagsForResource
(ListTagsForResourceRequest listTagsForResourceRequest) Retrieves the tags associated with the specified resource.default ListTagsForResourcePublisher
listTagsForResourcePaginator
(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) This is a variant oflistTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest)
operation.default ListTagsForResourcePublisher
listTagsForResourcePaginator
(ListTagsForResourceRequest listTagsForResourceRequest) This is a variant oflistTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest)
operation.listTLSInspectionConfigurations
(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest) Retrieves the metadata for the TLS inspection configurations that you have defined.listTLSInspectionConfigurations
(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest) Retrieves the metadata for the TLS inspection configurations that you have defined.listTLSInspectionConfigurationsPaginator
(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest) This is a variant oflistTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest)
operation.listTLSInspectionConfigurationsPaginator
(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest) This is a variant oflistTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest)
operation.putResourcePolicy
(Consumer<PutResourcePolicyRequest.Builder> putResourcePolicyRequest) Creates or updates an IAM policy for your rule group or firewall policy.putResourcePolicy
(PutResourcePolicyRequest putResourcePolicyRequest) Creates or updates an IAM policy for your rule group or firewall policy.The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfigurationdefault CompletableFuture
<TagResourceResponse> tagResource
(Consumer<TagResourceRequest.Builder> tagResourceRequest) Adds the specified tags to the specified resource.default CompletableFuture
<TagResourceResponse> tagResource
(TagResourceRequest tagResourceRequest) Adds the specified tags to the specified resource.default CompletableFuture
<UntagResourceResponse> untagResource
(Consumer<UntagResourceRequest.Builder> untagResourceRequest) Removes the tags with the specified keys from the specified resource.default CompletableFuture
<UntagResourceResponse> untagResource
(UntagResourceRequest untagResourceRequest) Removes the tags with the specified keys from the specified resource.updateFirewallDeleteProtection
(Consumer<UpdateFirewallDeleteProtectionRequest.Builder> updateFirewallDeleteProtectionRequest) Modifies the flag,DeleteProtection
, which indicates whether it is possible to delete the firewall.updateFirewallDeleteProtection
(UpdateFirewallDeleteProtectionRequest updateFirewallDeleteProtectionRequest) Modifies the flag,DeleteProtection
, which indicates whether it is possible to delete the firewall.updateFirewallDescription
(Consumer<UpdateFirewallDescriptionRequest.Builder> updateFirewallDescriptionRequest) Modifies the description for the specified firewall.updateFirewallDescription
(UpdateFirewallDescriptionRequest updateFirewallDescriptionRequest) Modifies the description for the specified firewall.updateFirewallEncryptionConfiguration
(Consumer<UpdateFirewallEncryptionConfigurationRequest.Builder> updateFirewallEncryptionConfigurationRequest) A complex type that contains settings for encryption of your firewall resources.updateFirewallEncryptionConfiguration
(UpdateFirewallEncryptionConfigurationRequest updateFirewallEncryptionConfigurationRequest) A complex type that contains settings for encryption of your firewall resources.updateFirewallPolicy
(Consumer<UpdateFirewallPolicyRequest.Builder> updateFirewallPolicyRequest) Updates the properties of the specified firewall policy.updateFirewallPolicy
(UpdateFirewallPolicyRequest updateFirewallPolicyRequest) Updates the properties of the specified firewall policy.updateFirewallPolicyChangeProtection
(Consumer<UpdateFirewallPolicyChangeProtectionRequest.Builder> updateFirewallPolicyChangeProtectionRequest) Modifies the flag,ChangeProtection
, which indicates whether it is possible to change the firewall.updateFirewallPolicyChangeProtection
(UpdateFirewallPolicyChangeProtectionRequest updateFirewallPolicyChangeProtectionRequest) Modifies the flag,ChangeProtection
, which indicates whether it is possible to change the firewall.updateLoggingConfiguration
(Consumer<UpdateLoggingConfigurationRequest.Builder> updateLoggingConfigurationRequest) Sets the logging configuration for the specified firewall.updateLoggingConfiguration
(UpdateLoggingConfigurationRequest updateLoggingConfigurationRequest) Sets the logging configuration for the specified firewall.default CompletableFuture
<UpdateRuleGroupResponse> updateRuleGroup
(Consumer<UpdateRuleGroupRequest.Builder> updateRuleGroupRequest) Updates the rule settings for the specified rule group.default CompletableFuture
<UpdateRuleGroupResponse> updateRuleGroup
(UpdateRuleGroupRequest updateRuleGroupRequest) Updates the rule settings for the specified rule group.updateSubnetChangeProtection
(Consumer<UpdateSubnetChangeProtectionRequest.Builder> updateSubnetChangeProtectionRequest) updateSubnetChangeProtection
(UpdateSubnetChangeProtectionRequest updateSubnetChangeProtectionRequest) updateTLSInspectionConfiguration
(Consumer<UpdateTlsInspectionConfigurationRequest.Builder> updateTlsInspectionConfigurationRequest) Updates the TLS inspection configuration settings for the specified TLS inspection configuration.updateTLSInspectionConfiguration
(UpdateTlsInspectionConfigurationRequest updateTlsInspectionConfigurationRequest) Updates the TLS inspection configuration settings for the specified TLS inspection configuration.Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close
Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName
-
Field Details
-
SERVICE_NAME
- See Also:
-
SERVICE_METADATA_ID
Value for looking up the service's metadata from theServiceMetadataProvider
.- See Also:
-
-
Method Details
-
associateFirewallPolicy
default CompletableFuture<AssociateFirewallPolicyResponse> associateFirewallPolicy(AssociateFirewallPolicyRequest associateFirewallPolicyRequest) Associates a FirewallPolicy to a Firewall.
A firewall policy defines how to monitor and manage your VPC network traffic, using a collection of inspection rule groups and other settings. Each firewall requires one firewall policy association, and you can use the same firewall policy for multiple firewalls.
- Parameters:
associateFirewallPolicyRequest
-- Returns:
- A Java Future containing the result of the AssociateFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
associateFirewallPolicy
default CompletableFuture<AssociateFirewallPolicyResponse> associateFirewallPolicy(Consumer<AssociateFirewallPolicyRequest.Builder> associateFirewallPolicyRequest) Associates a FirewallPolicy to a Firewall.
A firewall policy defines how to monitor and manage your VPC network traffic, using a collection of inspection rule groups and other settings. Each firewall requires one firewall policy association, and you can use the same firewall policy for multiple firewalls.
This is a convenience which creates an instance of the
AssociateFirewallPolicyRequest.Builder
avoiding the need to create one manually viaAssociateFirewallPolicyRequest.builder()
- Parameters:
associateFirewallPolicyRequest
- AConsumer
that will call methods onAssociateFirewallPolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the AssociateFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
associateSubnets
default CompletableFuture<AssociateSubnetsResponse> associateSubnets(AssociateSubnetsRequest associateSubnetsRequest) Associates the specified subnets in the Amazon VPC to the firewall. You can specify one subnet for each of the Availability Zones that the VPC spans.
This request creates an Network Firewall firewall endpoint in each of the subnets. To enable the firewall's protections, you must also modify the VPC's route tables for each subnet's Availability Zone, to redirect the traffic that's coming into and going out of the zone through the firewall endpoint.
- Parameters:
associateSubnetsRequest
-- Returns:
- A Java Future containing the result of the AssociateSubnets operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
associateSubnets
default CompletableFuture<AssociateSubnetsResponse> associateSubnets(Consumer<AssociateSubnetsRequest.Builder> associateSubnetsRequest) Associates the specified subnets in the Amazon VPC to the firewall. You can specify one subnet for each of the Availability Zones that the VPC spans.
This request creates an Network Firewall firewall endpoint in each of the subnets. To enable the firewall's protections, you must also modify the VPC's route tables for each subnet's Availability Zone, to redirect the traffic that's coming into and going out of the zone through the firewall endpoint.
This is a convenience which creates an instance of the
AssociateSubnetsRequest.Builder
avoiding the need to create one manually viaAssociateSubnetsRequest.builder()
- Parameters:
associateSubnetsRequest
- AConsumer
that will call methods onAssociateSubnetsRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the AssociateSubnets operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
createFirewall
default CompletableFuture<CreateFirewallResponse> createFirewall(CreateFirewallRequest createFirewallRequest) Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.
The firewall defines the configuration settings for an Network Firewall firewall. The settings that you can define at creation include the firewall policy, the subnets in your VPC to use for the firewall endpoints, and any tags that are attached to the firewall Amazon Web Services resource.
After you create a firewall, you can provide additional settings, like the logging configuration.
To update the settings for a firewall, you use the operations that apply to the settings themselves, for example UpdateLoggingConfiguration, AssociateSubnets, and UpdateFirewallDeleteProtection.
To manage a firewall's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
To retrieve information about firewalls, use ListFirewalls and DescribeFirewall.
- Parameters:
createFirewallRequest
-- Returns:
- A Java Future containing the result of the CreateFirewall operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
createFirewall
default CompletableFuture<CreateFirewallResponse> createFirewall(Consumer<CreateFirewallRequest.Builder> createFirewallRequest) Creates an Network Firewall Firewall and accompanying FirewallStatus for a VPC.
The firewall defines the configuration settings for an Network Firewall firewall. The settings that you can define at creation include the firewall policy, the subnets in your VPC to use for the firewall endpoints, and any tags that are attached to the firewall Amazon Web Services resource.
After you create a firewall, you can provide additional settings, like the logging configuration.
To update the settings for a firewall, you use the operations that apply to the settings themselves, for example UpdateLoggingConfiguration, AssociateSubnets, and UpdateFirewallDeleteProtection.
To manage a firewall's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
To retrieve information about firewalls, use ListFirewalls and DescribeFirewall.
This is a convenience which creates an instance of the
CreateFirewallRequest.Builder
avoiding the need to create one manually viaCreateFirewallRequest.builder()
- Parameters:
createFirewallRequest
- AConsumer
that will call methods onCreateFirewallRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the CreateFirewall operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
createFirewallPolicy
default CompletableFuture<CreateFirewallPolicyResponse> createFirewallPolicy(CreateFirewallPolicyRequest createFirewallPolicyRequest) Creates the firewall policy for the firewall according to the specifications.
An Network Firewall firewall policy defines the behavior of a firewall, in a collection of stateless and stateful rule groups and other settings. You can use one firewall policy for multiple firewalls.
- Parameters:
createFirewallPolicyRequest
-- Returns:
- A Java Future containing the result of the CreateFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
createFirewallPolicy
default CompletableFuture<CreateFirewallPolicyResponse> createFirewallPolicy(Consumer<CreateFirewallPolicyRequest.Builder> createFirewallPolicyRequest) Creates the firewall policy for the firewall according to the specifications.
An Network Firewall firewall policy defines the behavior of a firewall, in a collection of stateless and stateful rule groups and other settings. You can use one firewall policy for multiple firewalls.
This is a convenience which creates an instance of the
CreateFirewallPolicyRequest.Builder
avoiding the need to create one manually viaCreateFirewallPolicyRequest.builder()
- Parameters:
createFirewallPolicyRequest
- AConsumer
that will call methods onCreateFirewallPolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the CreateFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
createRuleGroup
default CompletableFuture<CreateRuleGroupResponse> createRuleGroup(CreateRuleGroupRequest createRuleGroupRequest) Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.
You provide your rule group specification in your request using either
RuleGroup
orRules
.- Parameters:
createRuleGroupRequest
-- Returns:
- A Java Future containing the result of the CreateRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
createRuleGroup
default CompletableFuture<CreateRuleGroupResponse> createRuleGroup(Consumer<CreateRuleGroupRequest.Builder> createRuleGroupRequest) Creates the specified stateless or stateful rule group, which includes the rules for network traffic inspection, a capacity setting, and tags.
You provide your rule group specification in your request using either
RuleGroup
orRules
.
This is a convenience which creates an instance of the
CreateRuleGroupRequest.Builder
avoiding the need to create one manually viaCreateRuleGroupRequest.builder()
- Parameters:
createRuleGroupRequest
- AConsumer
that will call methods onCreateRuleGroupRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the CreateRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
createTLSInspectionConfiguration
default CompletableFuture<CreateTlsInspectionConfigurationResponse> createTLSInspectionConfiguration(CreateTlsInspectionConfigurationRequest createTlsInspectionConfigurationRequest) Creates an Network Firewall TLS inspection configuration. A TLS inspection configuration contains Certificate Manager certificate associations between and the scope configurations that Network Firewall uses to decrypt and re-encrypt traffic traveling through your firewall.
After you create a TLS inspection configuration, you can associate it with a new firewall policy.
To update the settings for a TLS inspection configuration, use UpdateTLSInspectionConfiguration.
To manage a TLS inspection configuration's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
To retrieve information about TLS inspection configurations, use ListTLSInspectionConfigurations and DescribeTLSInspectionConfiguration.
For more information about TLS inspection configurations, see Inspecting SSL/TLS traffic with TLS inspection configurations in the Network Firewall Developer Guide.
- Parameters:
createTlsInspectionConfigurationRequest
-- Returns:
- A Java Future containing the result of the CreateTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
createTLSInspectionConfiguration
default CompletableFuture<CreateTlsInspectionConfigurationResponse> createTLSInspectionConfiguration(Consumer<CreateTlsInspectionConfigurationRequest.Builder> createTlsInspectionConfigurationRequest) Creates an Network Firewall TLS inspection configuration. A TLS inspection configuration contains Certificate Manager certificate associations between and the scope configurations that Network Firewall uses to decrypt and re-encrypt traffic traveling through your firewall.
After you create a TLS inspection configuration, you can associate it with a new firewall policy.
To update the settings for a TLS inspection configuration, use UpdateTLSInspectionConfiguration.
To manage a TLS inspection configuration's tags, use the standard Amazon Web Services resource tagging operations, ListTagsForResource, TagResource, and UntagResource.
To retrieve information about TLS inspection configurations, use ListTLSInspectionConfigurations and DescribeTLSInspectionConfiguration.
For more information about TLS inspection configurations, see Inspecting SSL/TLS traffic with TLS inspection configurations in the Network Firewall Developer Guide.
This is a convenience which creates an instance of the
CreateTlsInspectionConfigurationRequest.Builder
avoiding the need to create one manually viaCreateTlsInspectionConfigurationRequest.builder()
- Parameters:
createTlsInspectionConfigurationRequest
- AConsumer
that will call methods onCreateTlsInspectionConfigurationRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the CreateTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- LimitExceededException Unable to perform the operation because doing so would violate a limit setting.
- InsufficientCapacityException Amazon Web Services doesn't currently have enough available capacity to fulfill your request. Try your request later.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteFirewall
default CompletableFuture<DeleteFirewallResponse> deleteFirewall(DeleteFirewallRequest deleteFirewallRequest) Deletes the specified Firewall and its FirewallStatus. This operation requires the firewall's
DeleteProtection
flag to beFALSE
. You can't revert this operation.You can check whether a firewall is in use by reviewing the route tables for the Availability Zones where you have firewall subnet mappings. Retrieve the subnet mappings by calling DescribeFirewall. You define and update the route tables through Amazon VPC. As needed, update the route tables for the zones to remove the firewall endpoints. When the route tables no longer use the firewall endpoints, you can remove the firewall safely.
To delete a firewall, remove the delete protection if you need to using UpdateFirewallDeleteProtection, then delete the firewall by calling DeleteFirewall.
- Parameters:
deleteFirewallRequest
-- Returns:
- A Java Future containing the result of the DeleteFirewall operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- UnsupportedOperationException The operation you requested isn't supported by Network Firewall.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteFirewall
default CompletableFuture<DeleteFirewallResponse> deleteFirewall(Consumer<DeleteFirewallRequest.Builder> deleteFirewallRequest) Deletes the specified Firewall and its FirewallStatus. This operation requires the firewall's
DeleteProtection
flag to beFALSE
. You can't revert this operation.You can check whether a firewall is in use by reviewing the route tables for the Availability Zones where you have firewall subnet mappings. Retrieve the subnet mappings by calling DescribeFirewall. You define and update the route tables through Amazon VPC. As needed, update the route tables for the zones to remove the firewall endpoints. When the route tables no longer use the firewall endpoints, you can remove the firewall safely.
To delete a firewall, remove the delete protection if you need to using UpdateFirewallDeleteProtection, then delete the firewall by calling DeleteFirewall.
This is a convenience which creates an instance of the
DeleteFirewallRequest.Builder
avoiding the need to create one manually viaDeleteFirewallRequest.builder()
- Parameters:
deleteFirewallRequest
- AConsumer
that will call methods onDeleteFirewallRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DeleteFirewall operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- UnsupportedOperationException The operation you requested isn't supported by Network Firewall.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteFirewallPolicy
default CompletableFuture<DeleteFirewallPolicyResponse> deleteFirewallPolicy(DeleteFirewallPolicyRequest deleteFirewallPolicyRequest) Deletes the specified FirewallPolicy.
- Parameters:
deleteFirewallPolicyRequest
-- Returns:
- A Java Future containing the result of the DeleteFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- UnsupportedOperationException The operation you requested isn't supported by Network Firewall.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteFirewallPolicy
default CompletableFuture<DeleteFirewallPolicyResponse> deleteFirewallPolicy(Consumer<DeleteFirewallPolicyRequest.Builder> deleteFirewallPolicyRequest) Deletes the specified FirewallPolicy.
This is a convenience which creates an instance of the
DeleteFirewallPolicyRequest.Builder
avoiding the need to create one manually viaDeleteFirewallPolicyRequest.builder()
- Parameters:
deleteFirewallPolicyRequest
- AConsumer
that will call methods onDeleteFirewallPolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DeleteFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- UnsupportedOperationException The operation you requested isn't supported by Network Firewall.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteResourcePolicy
default CompletableFuture<DeleteResourcePolicyResponse> deleteResourcePolicy(DeleteResourcePolicyRequest deleteResourcePolicyRequest) Deletes a resource policy that you created in a PutResourcePolicy request.
- Parameters:
deleteResourcePolicyRequest
-- Returns:
- A Java Future containing the result of the DeleteResourcePolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidResourcePolicyException The policy statement failed validation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteResourcePolicy
default CompletableFuture<DeleteResourcePolicyResponse> deleteResourcePolicy(Consumer<DeleteResourcePolicyRequest.Builder> deleteResourcePolicyRequest) Deletes a resource policy that you created in a PutResourcePolicy request.
This is a convenience which creates an instance of the
DeleteResourcePolicyRequest.Builder
avoiding the need to create one manually viaDeleteResourcePolicyRequest.builder()
- Parameters:
deleteResourcePolicyRequest
- AConsumer
that will call methods onDeleteResourcePolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DeleteResourcePolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidResourcePolicyException The policy statement failed validation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteRuleGroup
default CompletableFuture<DeleteRuleGroupResponse> deleteRuleGroup(DeleteRuleGroupRequest deleteRuleGroupRequest) Deletes the specified RuleGroup.
- Parameters:
deleteRuleGroupRequest
-- Returns:
- A Java Future containing the result of the DeleteRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- UnsupportedOperationException The operation you requested isn't supported by Network Firewall.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteRuleGroup
default CompletableFuture<DeleteRuleGroupResponse> deleteRuleGroup(Consumer<DeleteRuleGroupRequest.Builder> deleteRuleGroupRequest) Deletes the specified RuleGroup.
This is a convenience which creates an instance of the
DeleteRuleGroupRequest.Builder
avoiding the need to create one manually viaDeleteRuleGroupRequest.builder()
- Parameters:
deleteRuleGroupRequest
- AConsumer
that will call methods onDeleteRuleGroupRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DeleteRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- UnsupportedOperationException The operation you requested isn't supported by Network Firewall.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteTLSInspectionConfiguration
default CompletableFuture<DeleteTlsInspectionConfigurationResponse> deleteTLSInspectionConfiguration(DeleteTlsInspectionConfigurationRequest deleteTlsInspectionConfigurationRequest) Deletes the specified TLSInspectionConfiguration.
- Parameters:
deleteTlsInspectionConfigurationRequest
-- Returns:
- A Java Future containing the result of the DeleteTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
deleteTLSInspectionConfiguration
default CompletableFuture<DeleteTlsInspectionConfigurationResponse> deleteTLSInspectionConfiguration(Consumer<DeleteTlsInspectionConfigurationRequest.Builder> deleteTlsInspectionConfigurationRequest) Deletes the specified TLSInspectionConfiguration.
This is a convenience which creates an instance of the
DeleteTlsInspectionConfigurationRequest.Builder
avoiding the need to create one manually viaDeleteTlsInspectionConfigurationRequest.builder()
- Parameters:
deleteTlsInspectionConfigurationRequest
- AConsumer
that will call methods onDeleteTlsInspectionConfigurationRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DeleteTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeFirewall
default CompletableFuture<DescribeFirewallResponse> describeFirewall(DescribeFirewallRequest describeFirewallRequest) Returns the data objects for the specified firewall.
- Parameters:
describeFirewallRequest
-- Returns:
- A Java Future containing the result of the DescribeFirewall operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeFirewall
default CompletableFuture<DescribeFirewallResponse> describeFirewall(Consumer<DescribeFirewallRequest.Builder> describeFirewallRequest) Returns the data objects for the specified firewall.
This is a convenience which creates an instance of the
DescribeFirewallRequest.Builder
avoiding the need to create one manually viaDescribeFirewallRequest.builder()
- Parameters:
describeFirewallRequest
- AConsumer
that will call methods onDescribeFirewallRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DescribeFirewall operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeFirewallPolicy
default CompletableFuture<DescribeFirewallPolicyResponse> describeFirewallPolicy(DescribeFirewallPolicyRequest describeFirewallPolicyRequest) Returns the data objects for the specified firewall policy.
- Parameters:
describeFirewallPolicyRequest
-- Returns:
- A Java Future containing the result of the DescribeFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeFirewallPolicy
default CompletableFuture<DescribeFirewallPolicyResponse> describeFirewallPolicy(Consumer<DescribeFirewallPolicyRequest.Builder> describeFirewallPolicyRequest) Returns the data objects for the specified firewall policy.
This is a convenience which creates an instance of the
DescribeFirewallPolicyRequest.Builder
avoiding the need to create one manually viaDescribeFirewallPolicyRequest.builder()
- Parameters:
describeFirewallPolicyRequest
- AConsumer
that will call methods onDescribeFirewallPolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DescribeFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeLoggingConfiguration
default CompletableFuture<DescribeLoggingConfigurationResponse> describeLoggingConfiguration(DescribeLoggingConfigurationRequest describeLoggingConfigurationRequest) Returns the logging configuration for the specified firewall.
- Parameters:
describeLoggingConfigurationRequest
-- Returns:
- A Java Future containing the result of the DescribeLoggingConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeLoggingConfiguration
default CompletableFuture<DescribeLoggingConfigurationResponse> describeLoggingConfiguration(Consumer<DescribeLoggingConfigurationRequest.Builder> describeLoggingConfigurationRequest) Returns the logging configuration for the specified firewall.
This is a convenience which creates an instance of the
DescribeLoggingConfigurationRequest.Builder
avoiding the need to create one manually viaDescribeLoggingConfigurationRequest.builder()
- Parameters:
describeLoggingConfigurationRequest
- AConsumer
that will call methods onDescribeLoggingConfigurationRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DescribeLoggingConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeResourcePolicy
default CompletableFuture<DescribeResourcePolicyResponse> describeResourcePolicy(DescribeResourcePolicyRequest describeResourcePolicyRequest) Retrieves a resource policy that you created in a PutResourcePolicy request.
- Parameters:
describeResourcePolicyRequest
-- Returns:
- A Java Future containing the result of the DescribeResourcePolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeResourcePolicy
default CompletableFuture<DescribeResourcePolicyResponse> describeResourcePolicy(Consumer<DescribeResourcePolicyRequest.Builder> describeResourcePolicyRequest) Retrieves a resource policy that you created in a PutResourcePolicy request.
This is a convenience which creates an instance of the
DescribeResourcePolicyRequest.Builder
avoiding the need to create one manually viaDescribeResourcePolicyRequest.builder()
- Parameters:
describeResourcePolicyRequest
- AConsumer
that will call methods onDescribeResourcePolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DescribeResourcePolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeRuleGroup
default CompletableFuture<DescribeRuleGroupResponse> describeRuleGroup(DescribeRuleGroupRequest describeRuleGroupRequest) Returns the data objects for the specified rule group.
- Parameters:
describeRuleGroupRequest
-- Returns:
- A Java Future containing the result of the DescribeRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeRuleGroup
default CompletableFuture<DescribeRuleGroupResponse> describeRuleGroup(Consumer<DescribeRuleGroupRequest.Builder> describeRuleGroupRequest) Returns the data objects for the specified rule group.
This is a convenience which creates an instance of the
DescribeRuleGroupRequest.Builder
avoiding the need to create one manually viaDescribeRuleGroupRequest.builder()
- Parameters:
describeRuleGroupRequest
- AConsumer
that will call methods onDescribeRuleGroupRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DescribeRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeRuleGroupMetadata
default CompletableFuture<DescribeRuleGroupMetadataResponse> describeRuleGroupMetadata(DescribeRuleGroupMetadataRequest describeRuleGroupMetadataRequest) High-level information about a rule group, returned by operations like create and describe. You can use the information provided in the metadata to retrieve and manage a rule group. You can retrieve all objects for a rule group by calling DescribeRuleGroup.
- Parameters:
describeRuleGroupMetadataRequest
-- Returns:
- A Java Future containing the result of the DescribeRuleGroupMetadata operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeRuleGroupMetadata
default CompletableFuture<DescribeRuleGroupMetadataResponse> describeRuleGroupMetadata(Consumer<DescribeRuleGroupMetadataRequest.Builder> describeRuleGroupMetadataRequest) High-level information about a rule group, returned by operations like create and describe. You can use the information provided in the metadata to retrieve and manage a rule group. You can retrieve all objects for a rule group by calling DescribeRuleGroup.
This is a convenience which creates an instance of the
DescribeRuleGroupMetadataRequest.Builder
avoiding the need to create one manually viaDescribeRuleGroupMetadataRequest.builder()
- Parameters:
describeRuleGroupMetadataRequest
- AConsumer
that will call methods onDescribeRuleGroupMetadataRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DescribeRuleGroupMetadata operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeTLSInspectionConfiguration
default CompletableFuture<DescribeTlsInspectionConfigurationResponse> describeTLSInspectionConfiguration(DescribeTlsInspectionConfigurationRequest describeTlsInspectionConfigurationRequest) Returns the data objects for the specified TLS inspection configuration.
- Parameters:
describeTlsInspectionConfigurationRequest
-- Returns:
- A Java Future containing the result of the DescribeTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
describeTLSInspectionConfiguration
default CompletableFuture<DescribeTlsInspectionConfigurationResponse> describeTLSInspectionConfiguration(Consumer<DescribeTlsInspectionConfigurationRequest.Builder> describeTlsInspectionConfigurationRequest) Returns the data objects for the specified TLS inspection configuration.
This is a convenience which creates an instance of the
DescribeTlsInspectionConfigurationRequest.Builder
avoiding the need to create one manually viaDescribeTlsInspectionConfigurationRequest.builder()
- Parameters:
describeTlsInspectionConfigurationRequest
- AConsumer
that will call methods onDescribeTlsInspectionConfigurationRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DescribeTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
disassociateSubnets
default CompletableFuture<DisassociateSubnetsResponse> disassociateSubnets(DisassociateSubnetsRequest disassociateSubnetsRequest) Removes the specified subnet associations from the firewall. This removes the firewall endpoints from the subnets and removes any network filtering protections that the endpoints were providing.
- Parameters:
disassociateSubnetsRequest
-- Returns:
- A Java Future containing the result of the DisassociateSubnets operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
disassociateSubnets
default CompletableFuture<DisassociateSubnetsResponse> disassociateSubnets(Consumer<DisassociateSubnetsRequest.Builder> disassociateSubnetsRequest) Removes the specified subnet associations from the firewall. This removes the firewall endpoints from the subnets and removes any network filtering protections that the endpoints were providing.
This is a convenience which creates an instance of the
DisassociateSubnetsRequest.Builder
avoiding the need to create one manually viaDisassociateSubnetsRequest.builder()
- Parameters:
disassociateSubnetsRequest
- AConsumer
that will call methods onDisassociateSubnetsRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the DisassociateSubnets operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- InvalidOperationException The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewallPolicies
default CompletableFuture<ListFirewallPoliciesResponse> listFirewallPolicies(ListFirewallPoliciesRequest listFirewallPoliciesRequest) Retrieves the metadata for the firewall policies that you have defined. Depending on your setting for max results and the number of firewall policies, a single call might not return the full list.
- Parameters:
listFirewallPoliciesRequest
-- Returns:
- A Java Future containing the result of the ListFirewallPolicies operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewallPolicies
default CompletableFuture<ListFirewallPoliciesResponse> listFirewallPolicies(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest) Retrieves the metadata for the firewall policies that you have defined. Depending on your setting for max results and the number of firewall policies, a single call might not return the full list.
This is a convenience which creates an instance of the
ListFirewallPoliciesRequest.Builder
avoiding the need to create one manually viaListFirewallPoliciesRequest.builder()
- Parameters:
listFirewallPoliciesRequest
- AConsumer
that will call methods onListFirewallPoliciesRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListFirewallPolicies operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewallPoliciesPaginator
default ListFirewallPoliciesPublisher listFirewallPoliciesPaginator(ListFirewallPoliciesRequest listFirewallPoliciesRequest) This is a variant of
listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesPublisher publisher = client.listFirewallPoliciesPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesPublisher publisher = client.listFirewallPoliciesPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest)
operation.- Parameters:
listFirewallPoliciesRequest
-- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewallPoliciesPaginator
default ListFirewallPoliciesPublisher listFirewallPoliciesPaginator(Consumer<ListFirewallPoliciesRequest.Builder> listFirewallPoliciesRequest) This is a variant of
listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesPublisher publisher = client.listFirewallPoliciesPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallPoliciesPublisher publisher = client.listFirewallPoliciesPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listFirewallPolicies(software.amazon.awssdk.services.networkfirewall.model.ListFirewallPoliciesRequest)
operation.
This is a convenience which creates an instance of the
ListFirewallPoliciesRequest.Builder
avoiding the need to create one manually viaListFirewallPoliciesRequest.builder()
- Parameters:
listFirewallPoliciesRequest
- AConsumer
that will call methods onListFirewallPoliciesRequest.Builder
to create a request.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewalls
default CompletableFuture<ListFirewallsResponse> listFirewalls(ListFirewallsRequest listFirewallsRequest) Retrieves the metadata for the firewalls that you have defined. If you provide VPC identifiers in your request, this returns only the firewalls for those VPCs.
Depending on your setting for max results and the number of firewalls, a single call might not return the full list.
- Parameters:
listFirewallsRequest
-- Returns:
- A Java Future containing the result of the ListFirewalls operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewalls
default CompletableFuture<ListFirewallsResponse> listFirewalls(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest) Retrieves the metadata for the firewalls that you have defined. If you provide VPC identifiers in your request, this returns only the firewalls for those VPCs.
Depending on your setting for max results and the number of firewalls, a single call might not return the full list.
This is a convenience which creates an instance of the
ListFirewallsRequest.Builder
avoiding the need to create one manually viaListFirewallsRequest.builder()
- Parameters:
listFirewallsRequest
- AConsumer
that will call methods onListFirewallsRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListFirewalls operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewallsPaginator
This is a variant of
listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsPublisher publisher = client.listFirewallsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsPublisher publisher = client.listFirewallsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListFirewallsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest)
operation.- Parameters:
listFirewallsRequest
-- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listFirewallsPaginator
default ListFirewallsPublisher listFirewallsPaginator(Consumer<ListFirewallsRequest.Builder> listFirewallsRequest) This is a variant of
listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsPublisher publisher = client.listFirewallsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListFirewallsPublisher publisher = client.listFirewallsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListFirewallsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listFirewalls(software.amazon.awssdk.services.networkfirewall.model.ListFirewallsRequest)
operation.
This is a convenience which creates an instance of the
ListFirewallsRequest.Builder
avoiding the need to create one manually viaListFirewallsRequest.builder()
- Parameters:
listFirewallsRequest
- AConsumer
that will call methods onListFirewallsRequest.Builder
to create a request.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listRuleGroups
default CompletableFuture<ListRuleGroupsResponse> listRuleGroups(ListRuleGroupsRequest listRuleGroupsRequest) Retrieves the metadata for the rule groups that you have defined. Depending on your setting for max results and the number of rule groups, a single call might not return the full list.
- Parameters:
listRuleGroupsRequest
-- Returns:
- A Java Future containing the result of the ListRuleGroups operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listRuleGroups
default CompletableFuture<ListRuleGroupsResponse> listRuleGroups(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest) Retrieves the metadata for the rule groups that you have defined. Depending on your setting for max results and the number of rule groups, a single call might not return the full list.
This is a convenience which creates an instance of the
ListRuleGroupsRequest.Builder
avoiding the need to create one manually viaListRuleGroupsRequest.builder()
- Parameters:
listRuleGroupsRequest
- AConsumer
that will call methods onListRuleGroupsRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListRuleGroups operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listRuleGroupsPaginator
default ListRuleGroupsPublisher listRuleGroupsPaginator(ListRuleGroupsRequest listRuleGroupsRequest) This is a variant of
listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsPublisher publisher = client.listRuleGroupsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsPublisher publisher = client.listRuleGroupsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest)
operation.- Parameters:
listRuleGroupsRequest
-- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listRuleGroupsPaginator
default ListRuleGroupsPublisher listRuleGroupsPaginator(Consumer<ListRuleGroupsRequest.Builder> listRuleGroupsRequest) This is a variant of
listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsPublisher publisher = client.listRuleGroupsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListRuleGroupsPublisher publisher = client.listRuleGroupsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listRuleGroups(software.amazon.awssdk.services.networkfirewall.model.ListRuleGroupsRequest)
operation.
This is a convenience which creates an instance of the
ListRuleGroupsRequest.Builder
avoiding the need to create one manually viaListRuleGroupsRequest.builder()
- Parameters:
listRuleGroupsRequest
- AConsumer
that will call methods onListRuleGroupsRequest.Builder
to create a request.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listTLSInspectionConfigurations
default CompletableFuture<ListTlsInspectionConfigurationsResponse> listTLSInspectionConfigurations(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest) Retrieves the metadata for the TLS inspection configurations that you have defined. Depending on your setting for max results and the number of TLS inspection configurations, a single call might not return the full list.
- Parameters:
listTlsInspectionConfigurationsRequest
-- Returns:
- A Java Future containing the result of the ListTLSInspectionConfigurations operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listTLSInspectionConfigurations
default CompletableFuture<ListTlsInspectionConfigurationsResponse> listTLSInspectionConfigurations(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest) Retrieves the metadata for the TLS inspection configurations that you have defined. Depending on your setting for max results and the number of TLS inspection configurations, a single call might not return the full list.
This is a convenience which creates an instance of the
ListTlsInspectionConfigurationsRequest.Builder
avoiding the need to create one manually viaListTlsInspectionConfigurationsRequest.builder()
- Parameters:
listTlsInspectionConfigurationsRequest
- AConsumer
that will call methods onListTlsInspectionConfigurationsRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListTLSInspectionConfigurations operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listTLSInspectionConfigurationsPaginator
default ListTLSInspectionConfigurationsPublisher listTLSInspectionConfigurationsPaginator(ListTlsInspectionConfigurationsRequest listTlsInspectionConfigurationsRequest) This is a variant of
listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsPublisher publisher = client.listTLSInspectionConfigurationsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsPublisher publisher = client.listTLSInspectionConfigurationsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest)
operation.- Parameters:
listTlsInspectionConfigurationsRequest
-- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listTLSInspectionConfigurationsPaginator
default ListTLSInspectionConfigurationsPublisher listTLSInspectionConfigurationsPaginator(Consumer<ListTlsInspectionConfigurationsRequest.Builder> listTlsInspectionConfigurationsRequest) This is a variant of
listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsPublisher publisher = client.listTLSInspectionConfigurationsPaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListTLSInspectionConfigurationsPublisher publisher = client.listTLSInspectionConfigurationsPaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTLSInspectionConfigurations(software.amazon.awssdk.services.networkfirewall.model.ListTlsInspectionConfigurationsRequest)
operation.
This is a convenience which creates an instance of the
ListTlsInspectionConfigurationsRequest.Builder
avoiding the need to create one manually viaListTlsInspectionConfigurationsRequest.builder()
- Parameters:
listTlsInspectionConfigurationsRequest
- AConsumer
that will call methods onListTlsInspectionConfigurationsRequest.Builder
to create a request.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ThrottlingException Unable to process the request due to throttling limitations.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
listTagsForResource
default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest) Retrieves the tags associated with the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
- Parameters:
listTagsForResourceRequest
-- Returns:
- A Java Future containing the result of the ListTagsForResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listTagsForResource
default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) Retrieves the tags associated with the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
This is a convenience which creates an instance of the
ListTagsForResourceRequest.Builder
avoiding the need to create one manually viaListTagsForResourceRequest.builder()
- Parameters:
listTagsForResourceRequest
- AConsumer
that will call methods onListTagsForResourceRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the ListTagsForResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listTagsForResourcePaginator
default ListTagsForResourcePublisher listTagsForResourcePaginator(ListTagsForResourceRequest listTagsForResourceRequest) This is a variant of
listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest)
operation.- Parameters:
listTagsForResourceRequest
-- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
listTagsForResourcePaginator
default ListTagsForResourcePublisher listTagsForResourcePaginator(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) This is a variant of
listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest)
operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see
Publisher.subscribe(org.reactivestreams.Subscriber)
. Each call to the subscribe method will result in a newSubscription
i.e., a new contract to stream data from the starting request.The following are few ways to use the response class:
1) Using the subscribe helper methodsoftware.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request); CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response }); future.get();
software.amazon.awssdk.services.networkfirewall.paginators.ListTagsForResourcePublisher publisher = client.listTagsForResourcePaginator(request); publisher.subscribe(new Subscriber<software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceResponse>() { public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... }; public void onNext(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceResponse response) { //... }; });
Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
Note: If you prefer to have control on service calls, use the
listTagsForResource(software.amazon.awssdk.services.networkfirewall.model.ListTagsForResourceRequest)
operation.
This is a convenience which creates an instance of the
ListTagsForResourceRequest.Builder
avoiding the need to create one manually viaListTagsForResourceRequest.builder()
- Parameters:
listTagsForResourceRequest
- AConsumer
that will call methods onListTagsForResourceRequest.Builder
to create a request.- Returns:
- A custom publisher that can be subscribed to request a stream of response pages.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
putResourcePolicy
default CompletableFuture<PutResourcePolicyResponse> putResourcePolicy(PutResourcePolicyRequest putResourcePolicyRequest) Creates or updates an IAM policy for your rule group or firewall policy. Use this to share rule groups and firewall policies between accounts. This operation works in conjunction with the Amazon Web Services Resource Access Manager (RAM) service to manage resource sharing for Network Firewall.
Use this operation to create or update a resource policy for your rule group or firewall policy. In the policy, you specify the accounts that you want to share the resource with and the operations that you want the accounts to be able to perform.
When you add an account in the resource policy, you then run the following Resource Access Manager (RAM) operations to access and accept the shared rule group or firewall policy.
-
GetResourceShareInvitations - Returns the Amazon Resource Names (ARNs) of the resource share invitations.
-
AcceptResourceShareInvitation - Accepts the share invitation for a specified resource share.
For additional information about resource sharing using RAM, see Resource Access Manager User Guide.
- Parameters:
putResourcePolicyRequest
-- Returns:
- A Java Future containing the result of the PutResourcePolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidResourcePolicyException The policy statement failed validation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
-
putResourcePolicy
default CompletableFuture<PutResourcePolicyResponse> putResourcePolicy(Consumer<PutResourcePolicyRequest.Builder> putResourcePolicyRequest) Creates or updates an IAM policy for your rule group or firewall policy. Use this to share rule groups and firewall policies between accounts. This operation works in conjunction with the Amazon Web Services Resource Access Manager (RAM) service to manage resource sharing for Network Firewall.
Use this operation to create or update a resource policy for your rule group or firewall policy. In the policy, you specify the accounts that you want to share the resource with and the operations that you want the accounts to be able to perform.
When you add an account in the resource policy, you then run the following Resource Access Manager (RAM) operations to access and accept the shared rule group or firewall policy.
-
GetResourceShareInvitations - Returns the Amazon Resource Names (ARNs) of the resource share invitations.
-
AcceptResourceShareInvitation - Accepts the share invitation for a specified resource share.
For additional information about resource sharing using RAM, see Resource Access Manager User Guide.
This is a convenience which creates an instance of the
PutResourcePolicyRequest.Builder
avoiding the need to create one manually viaPutResourcePolicyRequest.builder()
- Parameters:
putResourcePolicyRequest
- AConsumer
that will call methods onPutResourcePolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the PutResourcePolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidResourcePolicyException The policy statement failed validation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
-
tagResource
Adds the specified tags to the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
- Parameters:
tagResourceRequest
-- Returns:
- A Java Future containing the result of the TagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
tagResource
default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest) Adds the specified tags to the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
You can tag the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
This is a convenience which creates an instance of the
TagResourceRequest.Builder
avoiding the need to create one manually viaTagResourceRequest.builder()
- Parameters:
tagResourceRequest
- AConsumer
that will call methods onTagResourceRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the TagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
untagResource
default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest) Removes the tags with the specified keys from the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
You can manage tags for the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
- Parameters:
untagResourceRequest
-- Returns:
- A Java Future containing the result of the UntagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
untagResource
default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest) Removes the tags with the specified keys from the specified resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each Amazon Web Services resource, up to 50 tags for a resource.
You can manage tags for the Amazon Web Services resources that you manage through Network Firewall: firewalls, firewall policies, and rule groups.
This is a convenience which creates an instance of the
UntagResourceRequest.Builder
avoiding the need to create one manually viaUntagResourceRequest.builder()
- Parameters:
untagResourceRequest
- AConsumer
that will call methods onUntagResourceRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UntagResource operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
updateFirewallDeleteProtection
default CompletableFuture<UpdateFirewallDeleteProtectionResponse> updateFirewallDeleteProtection(UpdateFirewallDeleteProtectionRequest updateFirewallDeleteProtectionRequest) Modifies the flag,
DeleteProtection
, which indicates whether it is possible to delete the firewall. If the flag is set toTRUE
, the firewall is protected against deletion. This setting helps protect against accidentally deleting a firewall that's in use.- Parameters:
updateFirewallDeleteProtectionRequest
-- Returns:
- A Java Future containing the result of the UpdateFirewallDeleteProtection operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallDeleteProtection
default CompletableFuture<UpdateFirewallDeleteProtectionResponse> updateFirewallDeleteProtection(Consumer<UpdateFirewallDeleteProtectionRequest.Builder> updateFirewallDeleteProtectionRequest) Modifies the flag,
DeleteProtection
, which indicates whether it is possible to delete the firewall. If the flag is set toTRUE
, the firewall is protected against deletion. This setting helps protect against accidentally deleting a firewall that's in use.
This is a convenience which creates an instance of the
UpdateFirewallDeleteProtectionRequest.Builder
avoiding the need to create one manually viaUpdateFirewallDeleteProtectionRequest.builder()
- Parameters:
updateFirewallDeleteProtectionRequest
- AConsumer
that will call methods onUpdateFirewallDeleteProtectionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateFirewallDeleteProtection operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallDescription
default CompletableFuture<UpdateFirewallDescriptionResponse> updateFirewallDescription(UpdateFirewallDescriptionRequest updateFirewallDescriptionRequest) Modifies the description for the specified firewall. Use the description to help you identify the firewall when you're working with it.
- Parameters:
updateFirewallDescriptionRequest
-- Returns:
- A Java Future containing the result of the UpdateFirewallDescription operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallDescription
default CompletableFuture<UpdateFirewallDescriptionResponse> updateFirewallDescription(Consumer<UpdateFirewallDescriptionRequest.Builder> updateFirewallDescriptionRequest) Modifies the description for the specified firewall. Use the description to help you identify the firewall when you're working with it.
This is a convenience which creates an instance of the
UpdateFirewallDescriptionRequest.Builder
avoiding the need to create one manually viaUpdateFirewallDescriptionRequest.builder()
- Parameters:
updateFirewallDescriptionRequest
- AConsumer
that will call methods onUpdateFirewallDescriptionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateFirewallDescription operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallEncryptionConfiguration
default CompletableFuture<UpdateFirewallEncryptionConfigurationResponse> updateFirewallEncryptionConfiguration(UpdateFirewallEncryptionConfigurationRequest updateFirewallEncryptionConfigurationRequest) A complex type that contains settings for encryption of your firewall resources.
- Parameters:
updateFirewallEncryptionConfigurationRequest
-- Returns:
- A Java Future containing the result of the UpdateFirewallEncryptionConfiguration operation returned by
the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallEncryptionConfiguration
default CompletableFuture<UpdateFirewallEncryptionConfigurationResponse> updateFirewallEncryptionConfiguration(Consumer<UpdateFirewallEncryptionConfigurationRequest.Builder> updateFirewallEncryptionConfigurationRequest) A complex type that contains settings for encryption of your firewall resources.
This is a convenience which creates an instance of the
UpdateFirewallEncryptionConfigurationRequest.Builder
avoiding the need to create one manually viaUpdateFirewallEncryptionConfigurationRequest.builder()
- Parameters:
updateFirewallEncryptionConfigurationRequest
- AConsumer
that will call methods onUpdateFirewallEncryptionConfigurationRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateFirewallEncryptionConfiguration operation returned by
the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallPolicy
default CompletableFuture<UpdateFirewallPolicyResponse> updateFirewallPolicy(UpdateFirewallPolicyRequest updateFirewallPolicyRequest) Updates the properties of the specified firewall policy.
- Parameters:
updateFirewallPolicyRequest
-- Returns:
- A Java Future containing the result of the UpdateFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallPolicy
default CompletableFuture<UpdateFirewallPolicyResponse> updateFirewallPolicy(Consumer<UpdateFirewallPolicyRequest.Builder> updateFirewallPolicyRequest) Updates the properties of the specified firewall policy.
This is a convenience which creates an instance of the
UpdateFirewallPolicyRequest.Builder
avoiding the need to create one manually viaUpdateFirewallPolicyRequest.builder()
- Parameters:
updateFirewallPolicyRequest
- AConsumer
that will call methods onUpdateFirewallPolicyRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateFirewallPolicy operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallPolicyChangeProtection
default CompletableFuture<UpdateFirewallPolicyChangeProtectionResponse> updateFirewallPolicyChangeProtection(UpdateFirewallPolicyChangeProtectionRequest updateFirewallPolicyChangeProtectionRequest) Modifies the flag,
ChangeProtection
, which indicates whether it is possible to change the firewall. If the flag is set toTRUE
, the firewall is protected from changes. This setting helps protect against accidentally changing a firewall that's in use.- Parameters:
updateFirewallPolicyChangeProtectionRequest
-- Returns:
- A Java Future containing the result of the UpdateFirewallPolicyChangeProtection operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateFirewallPolicyChangeProtection
default CompletableFuture<UpdateFirewallPolicyChangeProtectionResponse> updateFirewallPolicyChangeProtection(Consumer<UpdateFirewallPolicyChangeProtectionRequest.Builder> updateFirewallPolicyChangeProtectionRequest) Modifies the flag,
ChangeProtection
, which indicates whether it is possible to change the firewall. If the flag is set toTRUE
, the firewall is protected from changes. This setting helps protect against accidentally changing a firewall that's in use.
This is a convenience which creates an instance of the
UpdateFirewallPolicyChangeProtectionRequest.Builder
avoiding the need to create one manually viaUpdateFirewallPolicyChangeProtectionRequest.builder()
- Parameters:
updateFirewallPolicyChangeProtectionRequest
- AConsumer
that will call methods onUpdateFirewallPolicyChangeProtectionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateFirewallPolicyChangeProtection operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateLoggingConfiguration
default CompletableFuture<UpdateLoggingConfigurationResponse> updateLoggingConfiguration(UpdateLoggingConfigurationRequest updateLoggingConfigurationRequest) Sets the logging configuration for the specified firewall.
To change the logging configuration, retrieve the LoggingConfiguration by calling DescribeLoggingConfiguration, then change it and provide the modified object to this update call. You must change the logging configuration one LogDestinationConfig at a time inside the retrieved LoggingConfiguration object.
You can perform only one of the following actions in any call to
UpdateLoggingConfiguration
:-
Create a new log destination object by adding a single
LogDestinationConfig
array element toLogDestinationConfigs
. -
Delete a log destination object by removing a single
LogDestinationConfig
array element fromLogDestinationConfigs
. -
Change the
LogDestination
setting in a singleLogDestinationConfig
array element.
You can't change the
LogDestinationType
orLogType
in aLogDestinationConfig
. To change these settings, delete the existingLogDestinationConfig
object and create a new one, using two separate calls to this update operation.- Parameters:
updateLoggingConfigurationRequest
-- Returns:
- A Java Future containing the result of the UpdateLoggingConfiguration operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- LogDestinationPermissionException Unable to send logs to a configured logging destination.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
-
updateLoggingConfiguration
default CompletableFuture<UpdateLoggingConfigurationResponse> updateLoggingConfiguration(Consumer<UpdateLoggingConfigurationRequest.Builder> updateLoggingConfigurationRequest) Sets the logging configuration for the specified firewall.
To change the logging configuration, retrieve the LoggingConfiguration by calling DescribeLoggingConfiguration, then change it and provide the modified object to this update call. You must change the logging configuration one LogDestinationConfig at a time inside the retrieved LoggingConfiguration object.
You can perform only one of the following actions in any call to
UpdateLoggingConfiguration
:-
Create a new log destination object by adding a single
LogDestinationConfig
array element toLogDestinationConfigs
. -
Delete a log destination object by removing a single
LogDestinationConfig
array element fromLogDestinationConfigs
. -
Change the
LogDestination
setting in a singleLogDestinationConfig
array element.
You can't change the
LogDestinationType
orLogType
in aLogDestinationConfig
. To change these settings, delete the existingLogDestinationConfig
object and create a new one, using two separate calls to this update operation.
This is a convenience which creates an instance of the
UpdateLoggingConfigurationRequest.Builder
avoiding the need to create one manually viaUpdateLoggingConfigurationRequest.builder()
- Parameters:
updateLoggingConfigurationRequest
- AConsumer
that will call methods onUpdateLoggingConfigurationRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateLoggingConfiguration operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- LogDestinationPermissionException Unable to send logs to a configured logging destination.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
-
updateRuleGroup
default CompletableFuture<UpdateRuleGroupResponse> updateRuleGroup(UpdateRuleGroupRequest updateRuleGroupRequest) Updates the rule settings for the specified rule group. You use a rule group by reference in one or more firewall policies. When you modify a rule group, you modify all firewall policies that use the rule group.
To update a rule group, first call DescribeRuleGroup to retrieve the current RuleGroup object, update the object as needed, and then provide the updated object to this call.
- Parameters:
updateRuleGroupRequest
-- Returns:
- A Java Future containing the result of the UpdateRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
updateRuleGroup
default CompletableFuture<UpdateRuleGroupResponse> updateRuleGroup(Consumer<UpdateRuleGroupRequest.Builder> updateRuleGroupRequest) Updates the rule settings for the specified rule group. You use a rule group by reference in one or more firewall policies. When you modify a rule group, you modify all firewall policies that use the rule group.
To update a rule group, first call DescribeRuleGroup to retrieve the current RuleGroup object, update the object as needed, and then provide the updated object to this call.
This is a convenience which creates an instance of the
UpdateRuleGroupRequest.Builder
avoiding the need to create one manually viaUpdateRuleGroupRequest.builder()
- Parameters:
updateRuleGroupRequest
- AConsumer
that will call methods onUpdateRuleGroupRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateRuleGroup operation returned by the service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- See Also:
-
updateSubnetChangeProtection
default CompletableFuture<UpdateSubnetChangeProtectionResponse> updateSubnetChangeProtection(UpdateSubnetChangeProtectionRequest updateSubnetChangeProtectionRequest) - Parameters:
updateSubnetChangeProtectionRequest
-- Returns:
- A Java Future containing the result of the UpdateSubnetChangeProtection operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateSubnetChangeProtection
default CompletableFuture<UpdateSubnetChangeProtectionResponse> updateSubnetChangeProtection(Consumer<UpdateSubnetChangeProtectionRequest.Builder> updateSubnetChangeProtectionRequest)
This is a convenience which creates an instance of the
UpdateSubnetChangeProtectionRequest.Builder
avoiding the need to create one manually viaUpdateSubnetChangeProtectionRequest.builder()
- Parameters:
updateSubnetChangeProtectionRequest
- AConsumer
that will call methods onUpdateSubnetChangeProtectionRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateSubnetChangeProtection operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- ResourceOwnerCheckException Unable to change the resource because your account doesn't own it.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateTLSInspectionConfiguration
default CompletableFuture<UpdateTlsInspectionConfigurationResponse> updateTLSInspectionConfiguration(UpdateTlsInspectionConfigurationRequest updateTlsInspectionConfigurationRequest) Updates the TLS inspection configuration settings for the specified TLS inspection configuration. You use a TLS inspection configuration by referencing it in one or more firewall policies. When you modify a TLS inspection configuration, you modify all firewall policies that use the TLS inspection configuration.
To update a TLS inspection configuration, first call DescribeTLSInspectionConfiguration to retrieve the current TLSInspectionConfiguration object, update the object as needed, and then provide the updated object to this call.
- Parameters:
updateTlsInspectionConfigurationRequest
-- Returns:
- A Java Future containing the result of the UpdateTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
updateTLSInspectionConfiguration
default CompletableFuture<UpdateTlsInspectionConfigurationResponse> updateTLSInspectionConfiguration(Consumer<UpdateTlsInspectionConfigurationRequest.Builder> updateTlsInspectionConfigurationRequest) Updates the TLS inspection configuration settings for the specified TLS inspection configuration. You use a TLS inspection configuration by referencing it in one or more firewall policies. When you modify a TLS inspection configuration, you modify all firewall policies that use the TLS inspection configuration.
To update a TLS inspection configuration, first call DescribeTLSInspectionConfiguration to retrieve the current TLSInspectionConfiguration object, update the object as needed, and then provide the updated object to this call.
This is a convenience which creates an instance of the
UpdateTlsInspectionConfigurationRequest.Builder
avoiding the need to create one manually viaUpdateTlsInspectionConfigurationRequest.builder()
- Parameters:
updateTlsInspectionConfigurationRequest
- AConsumer
that will call methods onUpdateTlsInspectionConfigurationRequest.Builder
to create a request.- Returns:
- A Java Future containing the result of the UpdateTLSInspectionConfiguration operation returned by the
service.
The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
-
You specified an unsupported parameter name or value.
-
You tried to update a property with a value that isn't among the available types.
-
Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.
-
- ResourceNotFoundException Unable to locate a resource using the parameters that you provided.
- ThrottlingException Unable to process the request due to throttling limitations.
- InternalServerErrorException Your request is valid, but Network Firewall couldn't perform the operation because of a system problem. Retry your request.
- InvalidTokenException The token you provided is stale or isn't valid for the operation.
- SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
- SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
- NetworkFirewallException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
- InvalidRequestException The operation failed because of a problem with your request. Examples
include:
- See Also:
-
serviceClientConfiguration
Description copied from interface:SdkClient
The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration- Specified by:
serviceClientConfiguration
in interfaceAwsClient
- Specified by:
serviceClientConfiguration
in interfaceSdkClient
- Returns:
- SdkServiceClientConfiguration
-
create
Create aNetworkFirewallAsyncClient
with the region loaded from theDefaultAwsRegionProviderChain
and credentials loaded from theDefaultCredentialsProvider
. -
builder
Create a builder that can be used to configure and create aNetworkFirewallAsyncClient
.
-