Interface M2tsSettings.Builder
- All Superinterfaces:
Buildable
,CopyableBuilder<M2tsSettings.Builder,
,M2tsSettings> SdkBuilder<M2tsSettings.Builder,
,M2tsSettings> SdkPojo
- Enclosing class:
M2tsSettings
public static interface M2tsSettings.Builder
extends SdkPojo, CopyableBuilder<M2tsSettings.Builder,M2tsSettings>
-
Method Summary
Modifier and TypeMethodDescriptionabsentInputAudioBehavior
(String absentInputAudioBehavior) When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input.absentInputAudioBehavior
(M2tsAbsentInputAudioBehavior absentInputAudioBehavior) When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input.When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.aribCaptionsPid
(String aribCaptionsPid) Packet Identifier (PID) for ARIB Captions in the transport stream.aribCaptionsPidControl
(String aribCaptionsPidControl) If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids.aribCaptionsPidControl
(M2tsAribCaptionsPidControl aribCaptionsPidControl) If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids.audioBufferModel
(String audioBufferModel) When set to dvb, uses DVB buffer model for Dolby Digital audio.audioBufferModel
(M2tsAudioBufferModel audioBufferModel) When set to dvb, uses DVB buffer model for Dolby Digital audio.audioFramesPerPes
(Integer audioFramesPerPes) The number of audio frames to insert for each PES packet.Packet Identifier (PID) of the elementary audio stream(s) in the transport stream.audioStreamType
(String audioStreamType) When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3.audioStreamType
(M2tsAudioStreamType audioStreamType) When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3.The output bitrate of the transport stream in bits per second.bufferModel
(String bufferModel) Controls the timing accuracy for output network traffic.bufferModel
(M2tsBufferModel bufferModel) Controls the timing accuracy for output network traffic.ccDescriptor
(String ccDescriptor) When set to enabled, generates captionServiceDescriptor in PMT.ccDescriptor
(M2tsCcDescriptor ccDescriptor) When set to enabled, generates captionServiceDescriptor in PMT.default M2tsSettings.Builder
dvbNitSettings
(Consumer<DvbNitSettings.Builder> dvbNitSettings) Inserts DVB Network Information Table (NIT) at the specified table repetition interval.dvbNitSettings
(DvbNitSettings dvbNitSettings) Inserts DVB Network Information Table (NIT) at the specified table repetition interval.default M2tsSettings.Builder
dvbSdtSettings
(Consumer<DvbSdtSettings.Builder> dvbSdtSettings) Inserts DVB Service Description Table (SDT) at the specified table repetition interval.dvbSdtSettings
(DvbSdtSettings dvbSdtSettings) Inserts DVB Service Description Table (SDT) at the specified table repetition interval.dvbSubPids
(String dvbSubPids) Packet Identifier (PID) for input source DVB Subtitle data to this output.default M2tsSettings.Builder
dvbTdtSettings
(Consumer<DvbTdtSettings.Builder> dvbTdtSettings) Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.dvbTdtSettings
(DvbTdtSettings dvbTdtSettings) Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.dvbTeletextPid
(String dvbTeletextPid) Packet Identifier (PID) for input source DVB Teletext data to this output.If set to passthrough, passes any EBIF data from the input source to this output.ebif
(M2tsEbifControl ebif) If set to passthrough, passes any EBIF data from the input source to this output.ebpAudioInterval
(String ebpAudioInterval) When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4.ebpAudioInterval
(M2tsAudioInterval ebpAudioInterval) When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4.ebpLookaheadMs
(Integer ebpLookaheadMs) When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video.ebpPlacement
(String ebpPlacement) Controls placement of EBP on Audio PIDs.ebpPlacement
(M2tsEbpPlacement ebpPlacement) Controls placement of EBP on Audio PIDs.This field is unused and deprecated.esRateInPes
(String esRateInPes) Include or exclude the ES Rate field in the PES header.esRateInPes
(M2tsEsRateInPes esRateInPes) Include or exclude the ES Rate field in the PES header.etvPlatformPid
(String etvPlatformPid) Packet Identifier (PID) for input source ETV Platform data to this output.etvSignalPid
(String etvSignalPid) Packet Identifier (PID) for input source ETV Signal data to this output.fragmentTime
(Double fragmentTime) The length in seconds of each fragment.If set to passthrough, passes any KLV data from the input source to this output.If set to passthrough, passes any KLV data from the input source to this output.klvDataPids
(String klvDataPids) Packet Identifier (PID) for input source KLV data to this output.nielsenId3Behavior
(String nielsenId3Behavior) If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.nielsenId3Behavior
(M2tsNielsenId3Behavior nielsenId3Behavior) If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.nullPacketBitrate
(Double nullPacketBitrate) Value in bits per second of extra null packets to insert into the transport stream.patInterval
(Integer patInterval) The number of milliseconds between instances of this table in the output transport stream.pcrControl
(String pcrControl) When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header.pcrControl
(M2tsPcrControl pcrControl) When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header.Maximum time in milliseconds between Program Clock Reference (PCRs) inserted into the transport stream.Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream.pmtInterval
(Integer pmtInterval) The number of milliseconds between instances of this table in the output transport stream.Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.programNum
(Integer programNum) The value of the program number field in the Program Map Table.When vbr, does not insert null packets into transport stream to fill specified bitrate.rateMode
(M2tsRateMode rateMode) When vbr, does not insert null packets into transport stream to fill specified bitrate.scte27Pids
(String scte27Pids) Packet Identifier (PID) for input source SCTE-27 data to this output.scte35Control
(String scte35Control) Optionally pass SCTE-35 signals from the input source to this output.scte35Control
(M2tsScte35Control scte35Control) Optionally pass SCTE-35 signals from the input source to this output.Packet Identifier (PID) of the SCTE-35 stream in the transport stream.scte35PrerollPullupMilliseconds
(Double scte35PrerollPullupMilliseconds) Defines the amount SCTE-35 preroll will be increased (in milliseconds) on the output.segmentationMarkers
(String segmentationMarkers) Inserts segmentation markers at each segmentationTime period.segmentationMarkers
(M2tsSegmentationMarkers segmentationMarkers) Inserts segmentation markers at each segmentationTime period.segmentationStyle
(String segmentationStyle) The segmentation style parameter controls how segmentation markers are inserted into the transport stream.segmentationStyle
(M2tsSegmentationStyle segmentationStyle) The segmentation style parameter controls how segmentation markers are inserted into the transport stream.segmentationTime
(Double segmentationTime) The length in seconds of each segment.timedMetadataBehavior
(String timedMetadataBehavior) When set to passthrough, timed metadata will be passed through from input to output.timedMetadataBehavior
(M2tsTimedMetadataBehavior timedMetadataBehavior) When set to passthrough, timed metadata will be passed through from input to output.timedMetadataPid
(String timedMetadataPid) Packet Identifier (PID) of the timed metadata stream in the transport stream.transportStreamId
(Integer transportStreamId) The value of the transport stream ID field in the Program Map Table.Packet Identifier (PID) of the elementary video stream in the transport stream.Methods inherited from interface software.amazon.awssdk.utils.builder.CopyableBuilder
copy
Methods inherited from interface software.amazon.awssdk.utils.builder.SdkBuilder
applyMutation, build
Methods inherited from interface software.amazon.awssdk.core.SdkPojo
equalsBySdkFields, sdkFields
-
Method Details
-
absentInputAudioBehavior
When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.- Parameters:
absentInputAudioBehavior
- When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
absentInputAudioBehavior
M2tsSettings.Builder absentInputAudioBehavior(M2tsAbsentInputAudioBehavior absentInputAudioBehavior) When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.- Parameters:
absentInputAudioBehavior
- When set to drop, output audio streams will be removed from the program if the selected input audio stream is removed from the input. This allows the output audio configuration to dynamically change based on input configuration. If this is set to encodeSilence, all output audio streams will output encoded silence when not connected to an active input stream.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
arib
When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.- Parameters:
arib
- When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
arib
When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.- Parameters:
arib
- When set to enabled, uses ARIB-compliant field muxing and removes video descriptor.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
aribCaptionsPid
Packet Identifier (PID) for ARIB Captions in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
aribCaptionsPid
- Packet Identifier (PID) for ARIB Captions in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
aribCaptionsPidControl
If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids. If set to useConfigured, ARIB Captions will be on the configured pid number.- Parameters:
aribCaptionsPidControl
- If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids. If set to useConfigured, ARIB Captions will be on the configured pid number.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
aribCaptionsPidControl
If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids. If set to useConfigured, ARIB Captions will be on the configured pid number.- Parameters:
aribCaptionsPidControl
- If set to auto, pid number used for ARIB Captions will be auto-selected from unused pids. If set to useConfigured, ARIB Captions will be on the configured pid number.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
audioBufferModel
When set to dvb, uses DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.- Parameters:
audioBufferModel
- When set to dvb, uses DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
audioBufferModel
When set to dvb, uses DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.- Parameters:
audioBufferModel
- When set to dvb, uses DVB buffer model for Dolby Digital audio. When set to atsc, the ATSC model is used.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
audioFramesPerPes
The number of audio frames to insert for each PES packet.- Parameters:
audioFramesPerPes
- The number of audio frames to insert for each PES packet.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
audioPids
Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
audioPids
- Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
audioStreamType
When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.- Parameters:
audioStreamType
- When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
audioStreamType
When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.- Parameters:
audioStreamType
- When set to atsc, uses stream type = 0x81 for AC3 and stream type = 0x87 for EAC3. When set to dvb, uses stream type = 0x06.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
bitrate
The output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate.- Parameters:
bitrate
- The output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
bufferModel
Controls the timing accuracy for output network traffic. Leave as MULTIPLEX to ensure accurate network packet timing. Or set to NONE, which might result in lower latency but will result in more variability in output network packet timing. This variability might cause interruptions, jitter, or bursty behavior in your playback or receiving devices.- Parameters:
bufferModel
- Controls the timing accuracy for output network traffic. Leave as MULTIPLEX to ensure accurate network packet timing. Or set to NONE, which might result in lower latency but will result in more variability in output network packet timing. This variability might cause interruptions, jitter, or bursty behavior in your playback or receiving devices.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
bufferModel
Controls the timing accuracy for output network traffic. Leave as MULTIPLEX to ensure accurate network packet timing. Or set to NONE, which might result in lower latency but will result in more variability in output network packet timing. This variability might cause interruptions, jitter, or bursty behavior in your playback or receiving devices.- Parameters:
bufferModel
- Controls the timing accuracy for output network traffic. Leave as MULTIPLEX to ensure accurate network packet timing. Or set to NONE, which might result in lower latency but will result in more variability in output network packet timing. This variability might cause interruptions, jitter, or bursty behavior in your playback or receiving devices.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ccDescriptor
When set to enabled, generates captionServiceDescriptor in PMT.- Parameters:
ccDescriptor
- When set to enabled, generates captionServiceDescriptor in PMT.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ccDescriptor
When set to enabled, generates captionServiceDescriptor in PMT.- Parameters:
ccDescriptor
- When set to enabled, generates captionServiceDescriptor in PMT.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
dvbNitSettings
Inserts DVB Network Information Table (NIT) at the specified table repetition interval.- Parameters:
dvbNitSettings
- Inserts DVB Network Information Table (NIT) at the specified table repetition interval.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
dvbNitSettings
Inserts DVB Network Information Table (NIT) at the specified table repetition interval. This is a convenience method that creates an instance of theDvbNitSettings.Builder
avoiding the need to create one manually viaDvbNitSettings.builder()
.When the
Consumer
completes,SdkBuilder.build()
is called immediately and its result is passed todvbNitSettings(DvbNitSettings)
.- Parameters:
dvbNitSettings
- a consumer that will call methods onDvbNitSettings.Builder
- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
dvbSdtSettings
Inserts DVB Service Description Table (SDT) at the specified table repetition interval.- Parameters:
dvbSdtSettings
- Inserts DVB Service Description Table (SDT) at the specified table repetition interval.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
dvbSdtSettings
Inserts DVB Service Description Table (SDT) at the specified table repetition interval. This is a convenience method that creates an instance of theDvbSdtSettings.Builder
avoiding the need to create one manually viaDvbSdtSettings.builder()
.When the
Consumer
completes,SdkBuilder.build()
is called immediately and its result is passed todvbSdtSettings(DvbSdtSettings)
.- Parameters:
dvbSdtSettings
- a consumer that will call methods onDvbSdtSettings.Builder
- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
dvbSubPids
Packet Identifier (PID) for input source DVB Subtitle data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
dvbSubPids
- Packet Identifier (PID) for input source DVB Subtitle data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
dvbTdtSettings
Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.- Parameters:
dvbTdtSettings
- Inserts DVB Time and Date Table (TDT) at the specified table repetition interval.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
dvbTdtSettings
Inserts DVB Time and Date Table (TDT) at the specified table repetition interval. This is a convenience method that creates an instance of theDvbTdtSettings.Builder
avoiding the need to create one manually viaDvbTdtSettings.builder()
.When the
Consumer
completes,SdkBuilder.build()
is called immediately and its result is passed todvbTdtSettings(DvbTdtSettings)
.- Parameters:
dvbTdtSettings
- a consumer that will call methods onDvbTdtSettings.Builder
- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
dvbTeletextPid
Packet Identifier (PID) for input source DVB Teletext data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
dvbTeletextPid
- Packet Identifier (PID) for input source DVB Teletext data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
ebif
If set to passthrough, passes any EBIF data from the input source to this output.- Parameters:
ebif
- If set to passthrough, passes any EBIF data from the input source to this output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ebif
If set to passthrough, passes any EBIF data from the input source to this output.- Parameters:
ebif
- If set to passthrough, passes any EBIF data from the input source to this output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ebpAudioInterval
When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. Only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 will always follow the video interval.- Parameters:
ebpAudioInterval
- When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. Only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 will always follow the video interval.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ebpAudioInterval
When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. Only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 will always follow the video interval.- Parameters:
ebpAudioInterval
- When videoAndFixedIntervals is selected, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. Only available when EBP Cablelabs segmentation markers are selected. Partitions 1 and 2 will always follow the video interval.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ebpLookaheadMs
When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.- Parameters:
ebpLookaheadMs
- When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
ebpPlacement
Controls placement of EBP on Audio PIDs. If set to videoAndAudioPids, EBP markers will be placed on the video PID and all audio PIDs. If set to videoPid, EBP markers will be placed on only the video PID.- Parameters:
ebpPlacement
- Controls placement of EBP on Audio PIDs. If set to videoAndAudioPids, EBP markers will be placed on the video PID and all audio PIDs. If set to videoPid, EBP markers will be placed on only the video PID.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ebpPlacement
Controls placement of EBP on Audio PIDs. If set to videoAndAudioPids, EBP markers will be placed on the video PID and all audio PIDs. If set to videoPid, EBP markers will be placed on only the video PID.- Parameters:
ebpPlacement
- Controls placement of EBP on Audio PIDs. If set to videoAndAudioPids, EBP markers will be placed on the video PID and all audio PIDs. If set to videoPid, EBP markers will be placed on only the video PID.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
ecmPid
This field is unused and deprecated.- Parameters:
ecmPid
- This field is unused and deprecated.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
esRateInPes
Include or exclude the ES Rate field in the PES header.- Parameters:
esRateInPes
- Include or exclude the ES Rate field in the PES header.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
esRateInPes
Include or exclude the ES Rate field in the PES header.- Parameters:
esRateInPes
- Include or exclude the ES Rate field in the PES header.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
etvPlatformPid
Packet Identifier (PID) for input source ETV Platform data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
etvPlatformPid
- Packet Identifier (PID) for input source ETV Platform data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
etvSignalPid
Packet Identifier (PID) for input source ETV Signal data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
etvSignalPid
- Packet Identifier (PID) for input source ETV Signal data to this output. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
fragmentTime
The length in seconds of each fragment. Only used with EBP markers.- Parameters:
fragmentTime
- The length in seconds of each fragment. Only used with EBP markers.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
klv
If set to passthrough, passes any KLV data from the input source to this output.- Parameters:
klv
- If set to passthrough, passes any KLV data from the input source to this output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
klv
If set to passthrough, passes any KLV data from the input source to this output.- Parameters:
klv
- If set to passthrough, passes any KLV data from the input source to this output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
klvDataPids
Packet Identifier (PID) for input source KLV data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
klvDataPids
- Packet Identifier (PID) for input source KLV data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
nielsenId3Behavior
If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.- Parameters:
nielsenId3Behavior
- If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
nielsenId3Behavior
If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.- Parameters:
nielsenId3Behavior
- If set to passthrough, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
nullPacketBitrate
Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.- Parameters:
nullPacketBitrate
- Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
patInterval
The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.- Parameters:
patInterval
- The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
pcrControl
When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.- Parameters:
pcrControl
- When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
pcrControl
When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.- Parameters:
pcrControl
- When set to pcrEveryPesPacket, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
pcrPeriod
Maximum time in milliseconds between Program Clock Reference (PCRs) inserted into the transport stream.- Parameters:
pcrPeriod
- Maximum time in milliseconds between Program Clock Reference (PCRs) inserted into the transport stream.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
pcrPid
Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
pcrPid
- Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
pmtInterval
The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.- Parameters:
pmtInterval
- The number of milliseconds between instances of this table in the output transport stream. Valid values are 0, 10..1000.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
pmtPid
Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
pmtPid
- Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
programNum
The value of the program number field in the Program Map Table.- Parameters:
programNum
- The value of the program number field in the Program Map Table.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
rateMode
When vbr, does not insert null packets into transport stream to fill specified bitrate. The bitrate setting acts as the maximum bitrate when vbr is set.- Parameters:
rateMode
- When vbr, does not insert null packets into transport stream to fill specified bitrate. The bitrate setting acts as the maximum bitrate when vbr is set.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
rateMode
When vbr, does not insert null packets into transport stream to fill specified bitrate. The bitrate setting acts as the maximum bitrate when vbr is set.- Parameters:
rateMode
- When vbr, does not insert null packets into transport stream to fill specified bitrate. The bitrate setting acts as the maximum bitrate when vbr is set.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
scte27Pids
Packet Identifier (PID) for input source SCTE-27 data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
scte27Pids
- Packet Identifier (PID) for input source SCTE-27 data to this output. Multiple values are accepted, and can be entered in ranges and/or by comma separation. Can be entered as decimal or hexadecimal values. Each PID specified must be in the range of 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
scte35Control
Optionally pass SCTE-35 signals from the input source to this output.- Parameters:
scte35Control
- Optionally pass SCTE-35 signals from the input source to this output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
scte35Control
Optionally pass SCTE-35 signals from the input source to this output.- Parameters:
scte35Control
- Optionally pass SCTE-35 signals from the input source to this output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
scte35Pid
Packet Identifier (PID) of the SCTE-35 stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
scte35Pid
- Packet Identifier (PID) of the SCTE-35 stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
segmentationMarkers
Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.- Parameters:
segmentationMarkers
- Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
segmentationMarkers
Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.- Parameters:
segmentationMarkers
- Inserts segmentation markers at each segmentationTime period. raiSegstart sets the Random Access Indicator bit in the adaptation field. raiAdapt sets the RAI bit and adds the current timecode in the private data bytes. psiSegstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebpLegacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
segmentationStyle
The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "resetCadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of "maintainCadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.- Parameters:
segmentationStyle
- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "resetCadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of "maintainCadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
segmentationStyle
The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "resetCadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of "maintainCadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.- Parameters:
segmentationStyle
- The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "resetCadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of $segmentationTime seconds. When a segmentation style of "maintainCadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentationTime seconds. Note that EBP lookahead is a slight exception to this rule.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
segmentationTime
The length in seconds of each segment. Required unless markers is set to _none_.- Parameters:
segmentationTime
- The length in seconds of each segment. Required unless markers is set to _none_.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
timedMetadataBehavior
When set to passthrough, timed metadata will be passed through from input to output.- Parameters:
timedMetadataBehavior
- When set to passthrough, timed metadata will be passed through from input to output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
timedMetadataBehavior
When set to passthrough, timed metadata will be passed through from input to output.- Parameters:
timedMetadataBehavior
- When set to passthrough, timed metadata will be passed through from input to output.- Returns:
- Returns a reference to this object so that method calls can be chained together.
- See Also:
-
timedMetadataPid
Packet Identifier (PID) of the timed metadata stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
timedMetadataPid
- Packet Identifier (PID) of the timed metadata stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
transportStreamId
The value of the transport stream ID field in the Program Map Table.- Parameters:
transportStreamId
- The value of the transport stream ID field in the Program Map Table.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
videoPid
Packet Identifier (PID) of the elementary video stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Parameters:
videoPid
- Packet Identifier (PID) of the elementary video stream in the transport stream. Can be entered as a decimal or hexadecimal value. Valid values are 32 (or 0x20)..8182 (or 0x1ff6).- Returns:
- Returns a reference to this object so that method calls can be chained together.
-
scte35PrerollPullupMilliseconds
Defines the amount SCTE-35 preroll will be increased (in milliseconds) on the output. Preroll is the amount of time between the presence of a SCTE-35 indication in a transport stream and the PTS of the video frame it references. Zero means don't add pullup (it doesn't mean set the preroll to zero). Negative pullup is not supported, which means that you can't make the preroll shorter. Be aware that latency in the output will increase by the pullup amount.- Parameters:
scte35PrerollPullupMilliseconds
- Defines the amount SCTE-35 preroll will be increased (in milliseconds) on the output. Preroll is the amount of time between the presence of a SCTE-35 indication in a transport stream and the PTS of the video frame it references. Zero means don't add pullup (it doesn't mean set the preroll to zero). Negative pullup is not supported, which means that you can't make the preroll shorter. Be aware that latency in the output will increase by the pullup amount.- Returns:
- Returns a reference to this object so that method calls can be chained together.
-