Interface UpdateFlowOutputRequest.Builder

All Superinterfaces:
AwsRequest.Builder, Buildable, CopyableBuilder<UpdateFlowOutputRequest.Builder,UpdateFlowOutputRequest>, MediaConnectRequest.Builder, SdkBuilder<UpdateFlowOutputRequest.Builder,UpdateFlowOutputRequest>, SdkPojo, SdkRequest.Builder
Enclosing class:
UpdateFlowOutputRequest

public static interface UpdateFlowOutputRequest.Builder extends MediaConnectRequest.Builder, SdkPojo, CopyableBuilder<UpdateFlowOutputRequest.Builder,UpdateFlowOutputRequest>
  • Method Details

    • cidrAllowList

      UpdateFlowOutputRequest.Builder cidrAllowList(Collection<String> cidrAllowList)
      The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
      Parameters:
      cidrAllowList - The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • cidrAllowList

      UpdateFlowOutputRequest.Builder cidrAllowList(String... cidrAllowList)
      The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
      Parameters:
      cidrAllowList - The range of IP addresses that should be allowed to initiate output requests to this flow. These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • description

      UpdateFlowOutputRequest.Builder description(String description)
      A description of the output. This description appears only on the AWS Elemental MediaConnect console and will not be seen by the end user.
      Parameters:
      description - A description of the output. This description appears only on the AWS Elemental MediaConnect console and will not be seen by the end user.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • destination

      UpdateFlowOutputRequest.Builder destination(String destination)
      The IP address where you want to send the output.
      Parameters:
      destination - The IP address where you want to send the output.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • encryption

      The type of key used for the encryption. If no keyType is provided, the service will use the default setting (static-key). Allowable encryption types: static-key.
      Parameters:
      encryption - The type of key used for the encryption. If no keyType is provided, the service will use the default setting (static-key). Allowable encryption types: static-key.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • encryption

      The type of key used for the encryption. If no keyType is provided, the service will use the default setting (static-key). Allowable encryption types: static-key. This is a convenience method that creates an instance of the UpdateEncryption.Builder avoiding the need to create one manually via UpdateEncryption.builder().

      When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to encryption(UpdateEncryption).

      Parameters:
      encryption - a consumer that will call methods on UpdateEncryption.Builder
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:
    • flowArn

      The flow that is associated with the output that you want to update.
      Parameters:
      flowArn - The flow that is associated with the output that you want to update.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • maxLatency

      UpdateFlowOutputRequest.Builder maxLatency(Integer maxLatency)
      The maximum latency in milliseconds. This parameter applies only to RIST-based, Zixi-based, and Fujitsu-based streams.
      Parameters:
      maxLatency - The maximum latency in milliseconds. This parameter applies only to RIST-based, Zixi-based, and Fujitsu-based streams.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • mediaStreamOutputConfigurations

      UpdateFlowOutputRequest.Builder mediaStreamOutputConfigurations(Collection<MediaStreamOutputConfigurationRequest> mediaStreamOutputConfigurations)
      The media streams that are associated with the output, and the parameters for those associations.
      Parameters:
      mediaStreamOutputConfigurations - The media streams that are associated with the output, and the parameters for those associations.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • mediaStreamOutputConfigurations

      UpdateFlowOutputRequest.Builder mediaStreamOutputConfigurations(MediaStreamOutputConfigurationRequest... mediaStreamOutputConfigurations)
      The media streams that are associated with the output, and the parameters for those associations.
      Parameters:
      mediaStreamOutputConfigurations - The media streams that are associated with the output, and the parameters for those associations.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • mediaStreamOutputConfigurations

      UpdateFlowOutputRequest.Builder mediaStreamOutputConfigurations(Consumer<MediaStreamOutputConfigurationRequest.Builder>... mediaStreamOutputConfigurations)
      The media streams that are associated with the output, and the parameters for those associations. This is a convenience method that creates an instance of the MediaStreamOutputConfigurationRequest.Builder avoiding the need to create one manually via MediaStreamOutputConfigurationRequest.builder().

      When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to mediaStreamOutputConfigurations(List<MediaStreamOutputConfigurationRequest>).

      Parameters:
      mediaStreamOutputConfigurations - a consumer that will call methods on MediaStreamOutputConfigurationRequest.Builder
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:
    • minLatency

      UpdateFlowOutputRequest.Builder minLatency(Integer minLatency)
      The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
      Parameters:
      minLatency - The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • outputArn

      The ARN of the output that you want to update.
      Parameters:
      outputArn - The ARN of the output that you want to update.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • port

      The port to use when content is distributed to this output.
      Parameters:
      port - The port to use when content is distributed to this output.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • protocol

      The protocol to use for the output.
      Parameters:
      protocol - The protocol to use for the output.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:
    • protocol

      The protocol to use for the output.
      Parameters:
      protocol - The protocol to use for the output.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:
    • remoteId

      The remote ID for the Zixi-pull stream.
      Parameters:
      remoteId - The remote ID for the Zixi-pull stream.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • senderControlPort

      UpdateFlowOutputRequest.Builder senderControlPort(Integer senderControlPort)
      The port that the flow uses to send outbound requests to initiate connection with the sender.
      Parameters:
      senderControlPort - The port that the flow uses to send outbound requests to initiate connection with the sender.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • senderIpAddress

      UpdateFlowOutputRequest.Builder senderIpAddress(String senderIpAddress)
      The IP address that the flow communicates with to initiate connection with the sender.
      Parameters:
      senderIpAddress - The IP address that the flow communicates with to initiate connection with the sender.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • smoothingLatency

      UpdateFlowOutputRequest.Builder smoothingLatency(Integer smoothingLatency)
      The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
      Parameters:
      smoothingLatency - The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • streamId

      The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.
      Parameters:
      streamId - The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • vpcInterfaceAttachment

      UpdateFlowOutputRequest.Builder vpcInterfaceAttachment(VpcInterfaceAttachment vpcInterfaceAttachment)
      The name of the VPC interface attachment to use for this output.
      Parameters:
      vpcInterfaceAttachment - The name of the VPC interface attachment to use for this output.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
    • vpcInterfaceAttachment

      default UpdateFlowOutputRequest.Builder vpcInterfaceAttachment(Consumer<VpcInterfaceAttachment.Builder> vpcInterfaceAttachment)
      The name of the VPC interface attachment to use for this output. This is a convenience method that creates an instance of the VpcInterfaceAttachment.Builder avoiding the need to create one manually via VpcInterfaceAttachment.builder().

      When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to vpcInterfaceAttachment(VpcInterfaceAttachment).

      Parameters:
      vpcInterfaceAttachment - a consumer that will call methods on VpcInterfaceAttachment.Builder
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:
    • overrideConfiguration

      UpdateFlowOutputRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
      Description copied from interface: AwsRequest.Builder
      Add an optional request override configuration.
      Specified by:
      overrideConfiguration in interface AwsRequest.Builder
      Parameters:
      overrideConfiguration - The override configuration.
      Returns:
      This object for method chaining.
    • overrideConfiguration

      Description copied from interface: AwsRequest.Builder
      Add an optional request override configuration.
      Specified by:
      overrideConfiguration in interface AwsRequest.Builder
      Parameters:
      builderConsumer - A Consumer to which an empty AwsRequestOverrideConfiguration.Builder will be given.
      Returns:
      This object for method chaining.