Package software.amazon.awssdk.services.lightsail.model

Interface InstancePortState.Builder

All Superinterfaces:
Buildable, CopyableBuilder<InstancePortState.Builder,InstancePortState>, SdkBuilder<InstancePortState.Builder,InstancePortState>, SdkPojo
Enclosing class:
InstancePortState
public static interface InstancePortState.Builder extends SdkPojo, CopyableBuilder<InstancePortState.Builder,InstancePortState>

  • Method Details

    • fromPort

      InstancePortState.Builder fromPort(Integer fromPort)

      The first port in a range of open ports on an instance.

      Allowed ports:

      • TCP and UDP - 0 to 65535

      • ICMP - The ICMP type for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.

      • ICMPv6 - The ICMP type for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

      Parameters:
      fromPort - The first port in a range of open ports on an instance.

      Allowed ports:

      • TCP and UDP - 0 to 65535

      • ICMP - The ICMP type for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.

      • ICMPv6 - The ICMP type for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • toPort

      InstancePortState.Builder toPort(Integer toPort)

      The last port in a range of open ports on an instance.

      Allowed ports:

      • TCP and UDP - 0 to 65535

      • ICMP - The ICMP code for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.

      • ICMPv6 - The ICMP code for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

      Parameters:
      toPort - The last port in a range of open ports on an instance.

      Allowed ports:

      • TCP and UDP - 0 to 65535

      • ICMP - The ICMP code for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.

      • ICMPv6 - The ICMP code for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • protocol

      InstancePortState.Builder protocol(String protocol)

      The IP protocol name.

      The name can be one of the following:

      • tcp - Transmission Control Protocol (TCP) provides reliable, ordered, and error-checked delivery of streamed data between applications running on hosts communicating by an IP network. If you have an application that doesn't require reliable data stream service, use UDP instead.

      • all - All transport layer protocol types. For more general information, see Transport layer on Wikipedia.

      • udp - With User Datagram Protocol (UDP), computer applications can send messages (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications are not required to set up transmission channels or data paths. Applications that don't require reliable data stream service can use UDP, which provides a connectionless datagram service that emphasizes reduced latency over reliability. If you do require reliable data stream service, use TCP instead.

      • icmp - Internet Control Message Protocol (ICMP) is used to send error messages and operational information indicating success or failure when communicating with an instance. For example, an error is indicated when an instance could not be reached. When you specify icmp as the protocol, you must specify the ICMP type using the fromPort parameter, and ICMP code using the toPort parameter.

      Parameters:
      protocol - The IP protocol name.

      The name can be one of the following:

      • tcp - Transmission Control Protocol (TCP) provides reliable, ordered, and error-checked delivery of streamed data between applications running on hosts communicating by an IP network. If you have an application that doesn't require reliable data stream service, use UDP instead.

      • all - All transport layer protocol types. For more general information, see Transport layer on Wikipedia.

      • udp - With User Datagram Protocol (UDP), computer applications can send messages (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications are not required to set up transmission channels or data paths. Applications that don't require reliable data stream service can use UDP, which provides a connectionless datagram service that emphasizes reduced latency over reliability. If you do require reliable data stream service, use TCP instead.

      • icmp - Internet Control Message Protocol (ICMP) is used to send error messages and operational information indicating success or failure when communicating with an instance. For example, an error is indicated when an instance could not be reached. When you specify icmp as the protocol, you must specify the ICMP type using the fromPort parameter, and ICMP code using the toPort parameter.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • protocol

      InstancePortState.Builder protocol(NetworkProtocol protocol)

      The IP protocol name.

      The name can be one of the following:

      • tcp - Transmission Control Protocol (TCP) provides reliable, ordered, and error-checked delivery of streamed data between applications running on hosts communicating by an IP network. If you have an application that doesn't require reliable data stream service, use UDP instead.

      • all - All transport layer protocol types. For more general information, see Transport layer on Wikipedia.

      • udp - With User Datagram Protocol (UDP), computer applications can send messages (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications are not required to set up transmission channels or data paths. Applications that don't require reliable data stream service can use UDP, which provides a connectionless datagram service that emphasizes reduced latency over reliability. If you do require reliable data stream service, use TCP instead.

      • icmp - Internet Control Message Protocol (ICMP) is used to send error messages and operational information indicating success or failure when communicating with an instance. For example, an error is indicated when an instance could not be reached. When you specify icmp as the protocol, you must specify the ICMP type using the fromPort parameter, and ICMP code using the toPort parameter.

      Parameters:
      protocol - The IP protocol name.

      The name can be one of the following:

      • tcp - Transmission Control Protocol (TCP) provides reliable, ordered, and error-checked delivery of streamed data between applications running on hosts communicating by an IP network. If you have an application that doesn't require reliable data stream service, use UDP instead.

      • all - All transport layer protocol types. For more general information, see Transport layer on Wikipedia.

      • udp - With User Datagram Protocol (UDP), computer applications can send messages (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications are not required to set up transmission channels or data paths. Applications that don't require reliable data stream service can use UDP, which provides a connectionless datagram service that emphasizes reduced latency over reliability. If you do require reliable data stream service, use TCP instead.

      • icmp - Internet Control Message Protocol (ICMP) is used to send error messages and operational information indicating success or failure when communicating with an instance. For example, an error is indicated when an instance could not be reached. When you specify icmp as the protocol, you must specify the ICMP type using the fromPort parameter, and ICMP code using the toPort parameter.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • state

      InstancePortState.Builder state(String state)

      Specifies whether the instance port is open or closed.

      The port state for Lightsail instances is always open.

      Parameters:
      state - Specifies whether the instance port is open or closed.

      The port state for Lightsail instances is always open.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • state

      InstancePortState.Builder state(PortState state)

      Specifies whether the instance port is open or closed.

      The port state for Lightsail instances is always open.

      Parameters:
      state - Specifies whether the instance port is open or closed.

      The port state for Lightsail instances is always open.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • cidrs

      InstancePortState.Builder cidrs(Collection<String> cidrs)

      The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol.

      The ipv6Cidrs parameter lists the IPv6 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Parameters:
      cidrs - The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol.

      The ipv6Cidrs parameter lists the IPv6 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • cidrs

      InstancePortState.Builder cidrs(String... cidrs)

      The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol.

      The ipv6Cidrs parameter lists the IPv6 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Parameters:
      cidrs - The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol.

      The ipv6Cidrs parameter lists the IPv6 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • ipv6Cidrs

      InstancePortState.Builder ipv6Cidrs(Collection<String> ipv6Cidrs)

      The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol. Only devices with an IPv6 address can connect to an instance through IPv6; otherwise, IPv4 should be used.

      The cidrs parameter lists the IPv4 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Parameters:
      ipv6Cidrs - The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol. Only devices with an IPv6 address can connect to an instance through IPv6; otherwise, IPv4 should be used.

      The cidrs parameter lists the IPv4 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • ipv6Cidrs

      InstancePortState.Builder ipv6Cidrs(String... ipv6Cidrs)

      The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol. Only devices with an IPv6 address can connect to an instance through IPv6; otherwise, IPv4 should be used.

      The cidrs parameter lists the IPv4 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Parameters:
      ipv6Cidrs - The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol. Only devices with an IPv6 address can connect to an instance through IPv6; otherwise, IPv4 should be used.

      The cidrs parameter lists the IPv4 addresses that are allowed to connect to an instance.

      For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • cidrListAliases

      InstancePortState.Builder cidrListAliases(Collection<String> cidrListAliases)

      An alias that defines access for a preconfigured range of IP addresses.

      The only alias currently supported is lightsail-connect, which allows IP addresses of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.

      Parameters:
      cidrListAliases - An alias that defines access for a preconfigured range of IP addresses.

      The only alias currently supported is lightsail-connect, which allows IP addresses of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • cidrListAliases

      InstancePortState.Builder cidrListAliases(String... cidrListAliases)

      An alias that defines access for a preconfigured range of IP addresses.

      The only alias currently supported is lightsail-connect, which allows IP addresses of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.

      Parameters:
      cidrListAliases - An alias that defines access for a preconfigured range of IP addresses.

      The only alias currently supported is lightsail-connect, which allows IP addresses of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.

      Returns:
      Returns a reference to this object so that method calls can be chained together.