Class BatchGetItemRequest

All Implemented Interfaces:
SdkPojo, ToCopyableBuilder<BatchGetItemRequest.Builder,BatchGetItemRequest>

@Generated("software.amazon.awssdk:codegen") public final class BatchGetItemRequest extends DynamoDbRequest implements ToCopyableBuilder<BatchGetItemRequest.Builder,BatchGetItemRequest>

Represents the input of a BatchGetItem operation.

  • Method Details

    • hasRequestItems

      public final boolean hasRequestItems()
      For responses, this returns true if the service returned a value for the RequestItems property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • requestItems

      public final Map<String,KeysAndAttributes> requestItems()

      A map of one or more table names or table ARNs and, for each table, a map that describes one or more items to retrieve from that table. Each table name or ARN can be used only once per BatchGetItem request.

      Each element in the map of items to retrieve consists of the following:

      • ConsistentRead - If true, a strongly consistent read is used; if false (the default), an eventually consistent read is used.

      • ExpressionAttributeNames - One or more substitution tokens for attribute names in the ProjectionExpression parameter. The following are some use cases for using ExpressionAttributeNames:

        • To access an attribute whose name conflicts with a DynamoDB reserved word.

        • To create a placeholder for repeating occurrences of an attribute name in an expression.

        • To prevent special characters in an attribute name from being misinterpreted in an expression.

        Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:

        • Percentile

        The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:

        • {"#P":"Percentile"}

        You could then use this substitution in an expression, as in this example:

        • #P = :val

        Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.

        For more information about expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.

      • Keys - An array of primary key attribute values that define specific items in the table. For each primary key, you must provide all of the key attributes. For example, with a simple primary key, you only need to provide the partition key value. For a composite key, you must provide both the partition key value and the sort key value.

      • ProjectionExpression - A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.

        If no attribute names are specified, then all attributes are returned. If any of the requested attributes are not found, they do not appear in the result.

        For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.

      • AttributesToGet - This is a legacy parameter. Use ProjectionExpression instead. For more information, see AttributesToGet in the Amazon DynamoDB Developer Guide.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasRequestItems() method.

      Returns:
      A map of one or more table names or table ARNs and, for each table, a map that describes one or more items to retrieve from that table. Each table name or ARN can be used only once per BatchGetItem request.

      Each element in the map of items to retrieve consists of the following:

      • ConsistentRead - If true, a strongly consistent read is used; if false (the default), an eventually consistent read is used.

      • ExpressionAttributeNames - One or more substitution tokens for attribute names in the ProjectionExpression parameter. The following are some use cases for using ExpressionAttributeNames:

        • To access an attribute whose name conflicts with a DynamoDB reserved word.

        • To create a placeholder for repeating occurrences of an attribute name in an expression.

        • To prevent special characters in an attribute name from being misinterpreted in an expression.

        Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:

        • Percentile

        The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide). To work around this, you could specify the following for ExpressionAttributeNames:

        • {"#P":"Percentile"}

        You could then use this substitution in an expression, as in this example:

        • #P = :val

        Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.

        For more information about expression attribute names, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.

      • Keys - An array of primary key attribute values that define specific items in the table. For each primary key, you must provide all of the key attributes. For example, with a simple primary key, you only need to provide the partition key value. For a composite key, you must provide both the partition key value and the sort key value.

      • ProjectionExpression - A string that identifies one or more attributes to retrieve from the table. These attributes can include scalars, sets, or elements of a JSON document. The attributes in the expression must be separated by commas.

        If no attribute names are specified, then all attributes are returned. If any of the requested attributes are not found, they do not appear in the result.

        For more information, see Accessing Item Attributes in the Amazon DynamoDB Developer Guide.

      • AttributesToGet - This is a legacy parameter. Use ProjectionExpression instead. For more information, see AttributesToGet in the Amazon DynamoDB Developer Guide.

    • returnConsumedCapacity

      public final ReturnConsumedCapacity returnConsumedCapacity()
      Returns the value of the ReturnConsumedCapacity property for this object.

      If the service returns an enum value that is not available in the current SDK version, returnConsumedCapacity will return ReturnConsumedCapacity.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from returnConsumedCapacityAsString().

      Returns:
      The value of the ReturnConsumedCapacity property for this object.
      See Also:
    • returnConsumedCapacityAsString

      public final String returnConsumedCapacityAsString()
      Returns the value of the ReturnConsumedCapacity property for this object.

      If the service returns an enum value that is not available in the current SDK version, returnConsumedCapacity will return ReturnConsumedCapacity.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from returnConsumedCapacityAsString().

      Returns:
      The value of the ReturnConsumedCapacity property for this object.
      See Also:
    • toBuilder

      public BatchGetItemRequest.Builder toBuilder()
      Description copied from interface: ToCopyableBuilder
      Take this object and create a builder that contains all of the current property values of this object.
      Specified by:
      toBuilder in interface ToCopyableBuilder<BatchGetItemRequest.Builder,BatchGetItemRequest>
      Specified by:
      toBuilder in class DynamoDbRequest
      Returns:
      a builder for type T
    • builder

      public static BatchGetItemRequest.Builder builder()
    • serializableBuilderClass

      public static Class<? extends BatchGetItemRequest.Builder> serializableBuilderClass()
    • hashCode

      public final int hashCode()
      Overrides:
      hashCode in class AwsRequest
    • equals

      public final boolean equals(Object obj)
      Overrides:
      equals in class AwsRequest
    • equalsBySdkFields

      public final boolean equalsBySdkFields(Object obj)
      Description copied from interface: SdkPojo
      Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in an SdkPojo class, and is generated based on a service model.

      If an SdkPojo class does not have any inherited fields, equalsBySdkFields and equals are essentially the same.

      Specified by:
      equalsBySdkFields in interface SdkPojo
      Parameters:
      obj - the object to be compared with
      Returns:
      true if the other object equals to this object by sdk fields, false otherwise.
    • toString

      public final String toString()
      Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
      Overrides:
      toString in class Object
    • getValueForField

      public final <T> Optional<T> getValueForField(String fieldName, Class<T> clazz)
      Description copied from class: SdkRequest
      Used to retrieve the value of a field from any class that extends SdkRequest. The field name specified should match the member name from the corresponding service-2.json model specified in the codegen-resources folder for a given service. The class specifies what class to cast the returned value to. If the returned value is also a modeled class, the SdkRequest.getValueForField(String, Class) method will again be available.
      Overrides:
      getValueForField in class SdkRequest
      Parameters:
      fieldName - The name of the member to be retrieved.
      clazz - The class to cast the returned object to.
      Returns:
      Optional containing the casted return value
    • sdkFields

      public final List<SdkField<?>> sdkFields()
      Specified by:
      sdkFields in interface SdkPojo
      Returns:
      List of SdkField in this POJO. May be empty list but should never be null.