Class AssociateVirtualInterfaceResponse

All Implemented Interfaces:
SdkPojo, ToCopyableBuilder<AssociateVirtualInterfaceResponse.Builder,AssociateVirtualInterfaceResponse>

@Generated("software.amazon.awssdk:codegen") public final class AssociateVirtualInterfaceResponse extends DirectConnectResponse implements ToCopyableBuilder<AssociateVirtualInterfaceResponse.Builder,AssociateVirtualInterfaceResponse>

Information about a virtual interface.

  • Method Details

    • ownerAccount

      public final String ownerAccount()

      The ID of the Amazon Web Services account that owns the virtual interface.

      Returns:
      The ID of the Amazon Web Services account that owns the virtual interface.
    • virtualInterfaceId

      public final String virtualInterfaceId()

      The ID of the virtual interface.

      Returns:
      The ID of the virtual interface.
    • location

      public final String location()

      The location of the connection.

      Returns:
      The location of the connection.
    • connectionId

      public final String connectionId()

      The ID of the connection.

      Returns:
      The ID of the connection.
    • virtualInterfaceType

      public final String virtualInterfaceType()

      The type of virtual interface. The possible values are private and public.

      Returns:
      The type of virtual interface. The possible values are private and public.
    • virtualInterfaceName

      public final String virtualInterfaceName()

      The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

      Returns:
      The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).
    • vlan

      public final Integer vlan()

      The ID of the VLAN.

      Returns:
      The ID of the VLAN.
    • asn

      public final Integer asn()

      The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

      The valid values are 1-2147483647.

      Returns:
      The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.

      The valid values are 1-2147483647.

    • amazonSideAsn

      public final Long amazonSideAsn()

      The autonomous system number (ASN) for the Amazon side of the connection.

      Returns:
      The autonomous system number (ASN) for the Amazon side of the connection.
    • authKey

      public final String authKey()

      The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

      Returns:
      The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.
    • amazonAddress

      public final String amazonAddress()

      The IP address assigned to the Amazon interface.

      Returns:
      The IP address assigned to the Amazon interface.
    • customerAddress

      public final String customerAddress()

      The IP address assigned to the customer interface.

      Returns:
      The IP address assigned to the customer interface.
    • addressFamily

      public final AddressFamily addressFamily()

      The address family for the BGP peer.

      If the service returns an enum value that is not available in the current SDK version, addressFamily will return AddressFamily.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from addressFamilyAsString().

      Returns:
      The address family for the BGP peer.
      See Also:
    • addressFamilyAsString

      public final String addressFamilyAsString()

      The address family for the BGP peer.

      If the service returns an enum value that is not available in the current SDK version, addressFamily will return AddressFamily.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from addressFamilyAsString().

      Returns:
      The address family for the BGP peer.
      See Also:
    • virtualInterfaceState

      public final VirtualInterfaceState virtualInterfaceState()

      The state of the virtual interface. The following are the possible values:

      • confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.

      • verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.

      • pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.

      • available: A virtual interface that is able to forward traffic.

      • down: A virtual interface that is BGP down.

      • deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.

      • deleted: A virtual interface that cannot forward traffic.

      • rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.

      • unknown: The state of the virtual interface is not available.

      If the service returns an enum value that is not available in the current SDK version, virtualInterfaceState will return VirtualInterfaceState.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from virtualInterfaceStateAsString().

      Returns:
      The state of the virtual interface. The following are the possible values:

      • confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.

      • verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.

      • pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.

      • available: A virtual interface that is able to forward traffic.

      • down: A virtual interface that is BGP down.

      • deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.

      • deleted: A virtual interface that cannot forward traffic.

      • rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.

      • unknown: The state of the virtual interface is not available.

      See Also:
    • virtualInterfaceStateAsString

      public final String virtualInterfaceStateAsString()

      The state of the virtual interface. The following are the possible values:

      • confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.

      • verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.

      • pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.

      • available: A virtual interface that is able to forward traffic.

      • down: A virtual interface that is BGP down.

      • deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.

      • deleted: A virtual interface that cannot forward traffic.

      • rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.

      • unknown: The state of the virtual interface is not available.

      If the service returns an enum value that is not available in the current SDK version, virtualInterfaceState will return VirtualInterfaceState.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from virtualInterfaceStateAsString().

      Returns:
      The state of the virtual interface. The following are the possible values:

      • confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.

      • verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.

      • pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.

      • available: A virtual interface that is able to forward traffic.

      • down: A virtual interface that is BGP down.

      • deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.

      • deleted: A virtual interface that cannot forward traffic.

      • rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the Confirming state is deleted by the virtual interface owner, the virtual interface enters the Rejected state.

      • unknown: The state of the virtual interface is not available.

      See Also:
    • customerRouterConfig

      public final String customerRouterConfig()

      The customer router configuration.

      Returns:
      The customer router configuration.
    • mtu

      public final Integer mtu()

      The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500

      Returns:
      The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500
    • jumboFrameCapable

      public final Boolean jumboFrameCapable()

      Indicates whether jumbo frames are supported.

      Returns:
      Indicates whether jumbo frames are supported.
    • virtualGatewayId

      public final String virtualGatewayId()

      The ID of the virtual private gateway. Applies only to private virtual interfaces.

      Returns:
      The ID of the virtual private gateway. Applies only to private virtual interfaces.
    • directConnectGatewayId

      public final String directConnectGatewayId()

      The ID of the Direct Connect gateway.

      Returns:
      The ID of the Direct Connect gateway.
    • hasRouteFilterPrefixes

      public final boolean hasRouteFilterPrefixes()
      For responses, this returns true if the service returned a value for the RouteFilterPrefixes property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • routeFilterPrefixes

      public final List<RouteFilterPrefix> routeFilterPrefixes()

      The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasRouteFilterPrefixes() method.

      Returns:
      The routes to be advertised to the Amazon Web Services network in this Region. Applies to public virtual interfaces.
    • hasBgpPeers

      public final boolean hasBgpPeers()
      For responses, this returns true if the service returned a value for the BgpPeers property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • bgpPeers

      public final List<BGPPeer> bgpPeers()

      The BGP peers configured on this virtual interface.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasBgpPeers() method.

      Returns:
      The BGP peers configured on this virtual interface.
    • region

      public final String region()

      The Amazon Web Services Region where the virtual interface is located.

      Returns:
      The Amazon Web Services Region where the virtual interface is located.
    • awsDeviceV2

      public final String awsDeviceV2()

      The Direct Connect endpoint that terminates the physical connection.

      Returns:
      The Direct Connect endpoint that terminates the physical connection.
    • awsLogicalDeviceId

      public final String awsLogicalDeviceId()

      The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

      Returns:
      The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
    • hasTags

      public final boolean hasTags()
      For responses, this returns true if the service returned a value for the Tags property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • tags

      public final List<Tag> tags()

      The tags associated with the virtual interface.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasTags() method.

      Returns:
      The tags associated with the virtual interface.
    • siteLinkEnabled

      public final Boolean siteLinkEnabled()

      Indicates whether SiteLink is enabled.

      Returns:
      Indicates whether SiteLink is enabled.
    • toBuilder

      Description copied from interface: ToCopyableBuilder
      Take this object and create a builder that contains all of the current property values of this object.
      Specified by:
      toBuilder in interface ToCopyableBuilder<AssociateVirtualInterfaceResponse.Builder,AssociateVirtualInterfaceResponse>
      Specified by:
      toBuilder in class AwsResponse
      Returns:
      a builder for type T
    • builder

    • serializableBuilderClass

      public static Class<? extends AssociateVirtualInterfaceResponse.Builder> serializableBuilderClass()
    • hashCode

      public final int hashCode()
      Overrides:
      hashCode in class AwsResponse
    • equals

      public final boolean equals(Object obj)
      Overrides:
      equals in class AwsResponse
    • equalsBySdkFields

      public final boolean equalsBySdkFields(Object obj)
      Description copied from interface: SdkPojo
      Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in an SdkPojo class, and is generated based on a service model.

      If an SdkPojo class does not have any inherited fields, equalsBySdkFields and equals are essentially the same.

      Specified by:
      equalsBySdkFields in interface SdkPojo
      Parameters:
      obj - the object to be compared with
      Returns:
      true if the other object equals to this object by sdk fields, false otherwise.
    • toString

      public final String toString()
      Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
      Overrides:
      toString in class Object
    • getValueForField

      public final <T> Optional<T> getValueForField(String fieldName, Class<T> clazz)
      Description copied from class: SdkResponse
      Used to retrieve the value of a field from any class that extends SdkResponse. The field name specified should match the member name from the corresponding service-2.json model specified in the codegen-resources folder for a given service. The class specifies what class to cast the returned value to. If the returned value is also a modeled class, the SdkResponse.getValueForField(String, Class) method will again be available.
      Overrides:
      getValueForField in class SdkResponse
      Parameters:
      fieldName - The name of the member to be retrieved.
      clazz - The class to cast the returned object to.
      Returns:
      Optional containing the casted return value
    • sdkFields

      public final List<SdkField<?>> sdkFields()
      Specified by:
      sdkFields in interface SdkPojo
      Returns:
      List of SdkField in this POJO. May be empty list but should never be null.