public static interface CreateIntegrationResponse.Builder extends ApiGatewayV2Response.Builder, SdkPojo, CopyableBuilder<CreateIntegrationResponse.Builder,CreateIntegrationResponse>
Modifier and Type | Method and Description |
---|---|
CreateIntegrationResponse.Builder |
apiGatewayManaged(Boolean apiGatewayManaged)
Specifies whether an integration is managed by API Gateway.
|
CreateIntegrationResponse.Builder |
connectionId(String connectionId)
The ID of the VPC link for a private integration.
|
CreateIntegrationResponse.Builder |
connectionType(ConnectionType connectionType)
The type of the network connection to the integration endpoint.
|
CreateIntegrationResponse.Builder |
connectionType(String connectionType)
The type of the network connection to the integration endpoint.
|
CreateIntegrationResponse.Builder |
contentHandlingStrategy(ContentHandlingStrategy contentHandlingStrategy)
Supported only for WebSocket APIs.
|
CreateIntegrationResponse.Builder |
contentHandlingStrategy(String contentHandlingStrategy)
Supported only for WebSocket APIs.
|
CreateIntegrationResponse.Builder |
credentialsArn(String credentialsArn)
Specifies the credentials required for the integration, if any.
|
CreateIntegrationResponse.Builder |
description(String description)
Represents the description of an integration.
|
CreateIntegrationResponse.Builder |
integrationId(String integrationId)
Represents the identifier of an integration.
|
CreateIntegrationResponse.Builder |
integrationMethod(String integrationMethod)
Specifies the integration's HTTP method type.
|
CreateIntegrationResponse.Builder |
integrationResponseSelectionExpression(String integrationResponseSelectionExpression)
The integration response selection expression for the integration.
|
CreateIntegrationResponse.Builder |
integrationSubtype(String integrationSubtype)
Supported only for HTTP API AWS_PROXY integrations.
|
CreateIntegrationResponse.Builder |
integrationType(IntegrationType integrationType)
The integration type of an integration.
|
CreateIntegrationResponse.Builder |
integrationType(String integrationType)
The integration type of an integration.
|
CreateIntegrationResponse.Builder |
integrationUri(String integrationUri)
For a Lambda integration, specify the URI of a Lambda function.
|
CreateIntegrationResponse.Builder |
passthroughBehavior(PassthroughBehavior passthroughBehavior)
Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request,
and the available mapping templates specified as the requestTemplates property on the Integration resource.
|
CreateIntegrationResponse.Builder |
passthroughBehavior(String passthroughBehavior)
Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request,
and the available mapping templates specified as the requestTemplates property on the Integration resource.
|
CreateIntegrationResponse.Builder |
payloadFormatVersion(String payloadFormatVersion)
Specifies the format of the payload sent to an integration.
|
CreateIntegrationResponse.Builder |
requestParameters(Map<String,String> requestParameters)
For WebSocket APIs, a key-value map specifying request parameters that are passed from the method request to
the backend.
|
CreateIntegrationResponse.Builder |
requestTemplates(Map<String,String> requestTemplates)
Represents a map of Velocity templates that are applied on the request payload based on the value of the
Content-Type header sent by the client.
|
CreateIntegrationResponse.Builder |
responseParameters(Map<String,Map<String,String>> responseParameters)
Supported only for HTTP APIs.
|
CreateIntegrationResponse.Builder |
templateSelectionExpression(String templateSelectionExpression)
The template selection expression for the integration.
|
CreateIntegrationResponse.Builder |
timeoutInMillis(Integer timeoutInMillis)
Custom timeout between 50 and 29,000 milliseconds for WebSocket APIs and between 50 and 30,000 milliseconds
for HTTP APIs.
|
default CreateIntegrationResponse.Builder |
tlsConfig(Consumer<TlsConfig.Builder> tlsConfig)
The TLS configuration for a private integration.
|
CreateIntegrationResponse.Builder |
tlsConfig(TlsConfig tlsConfig)
The TLS configuration for a private integration.
|
build, responseMetadata, responseMetadata
sdkHttpResponse, sdkHttpResponse
equalsBySdkFields, sdkFields
copy
applyMutation, build
CreateIntegrationResponse.Builder apiGatewayManaged(Boolean apiGatewayManaged)
Specifies whether an integration is managed by API Gateway. If you created an API using using quick create, the resulting integration is managed by API Gateway. You can update a managed integration, but you can't delete it.
apiGatewayManaged
- Specifies whether an integration is managed by API Gateway. If you created an API using using quick
create, the resulting integration is managed by API Gateway. You can update a managed integration, but
you can't delete it.CreateIntegrationResponse.Builder connectionId(String connectionId)
The ID of the VPC link for a private integration. Supported only for HTTP APIs.
connectionId
- The ID of the VPC link for a private integration. Supported only for HTTP APIs.CreateIntegrationResponse.Builder connectionType(String connectionType)
The type of the network connection to the integration endpoint. Specify INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and resources in a VPC. The default value is INTERNET.
connectionType
- The type of the network connection to the integration endpoint. Specify INTERNET for connections
through the public routable internet or VPC_LINK for private connections between API Gateway and
resources in a VPC. The default value is INTERNET.ConnectionType
,
ConnectionType
CreateIntegrationResponse.Builder connectionType(ConnectionType connectionType)
The type of the network connection to the integration endpoint. Specify INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and resources in a VPC. The default value is INTERNET.
connectionType
- The type of the network connection to the integration endpoint. Specify INTERNET for connections
through the public routable internet or VPC_LINK for private connections between API Gateway and
resources in a VPC. The default value is INTERNET.ConnectionType
,
ConnectionType
CreateIntegrationResponse.Builder contentHandlingStrategy(String contentHandlingStrategy)
Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:
CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.
CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.
If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.
contentHandlingStrategy
- Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions.
Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:
CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.
CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.
If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.
ContentHandlingStrategy
,
ContentHandlingStrategy
CreateIntegrationResponse.Builder contentHandlingStrategy(ContentHandlingStrategy contentHandlingStrategy)
Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:
CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.
CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.
If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.
contentHandlingStrategy
- Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions.
Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:
CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.
CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.
If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.
ContentHandlingStrategy
,
ContentHandlingStrategy
CreateIntegrationResponse.Builder credentialsArn(String credentialsArn)
Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::*:user/*. To use resource-based permissions on supported AWS services, specify null.
credentialsArn
- Specifies the credentials required for the integration, if any. For AWS integrations, three options
are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name
(ARN). To require that the caller's identity be passed through from the request, specify the string
arn:aws:iam::*:user/*. To use resource-based permissions on supported AWS services, specify null.CreateIntegrationResponse.Builder description(String description)
Represents the description of an integration.
description
- Represents the description of an integration.CreateIntegrationResponse.Builder integrationId(String integrationId)
Represents the identifier of an integration.
integrationId
- Represents the identifier of an integration.CreateIntegrationResponse.Builder integrationMethod(String integrationMethod)
Specifies the integration's HTTP method type.
integrationMethod
- Specifies the integration's HTTP method type.CreateIntegrationResponse.Builder integrationResponseSelectionExpression(String integrationResponseSelectionExpression)
The integration response selection expression for the integration. Supported only for WebSocket APIs. See Integration Response Selection Expressions.
integrationResponseSelectionExpression
- The integration response selection expression for the integration. Supported only for WebSocket APIs.
See Integration Response Selection Expressions.CreateIntegrationResponse.Builder integrationSubtype(String integrationSubtype)
Supported only for HTTP API AWS_PROXY integrations. Specifies the AWS service action to invoke. To learn more, see Integration subtype reference.
integrationSubtype
- Supported only for HTTP API AWS_PROXY integrations. Specifies the AWS service action to invoke. To
learn more, see Integration subtype reference.CreateIntegrationResponse.Builder integrationType(String integrationType)
The integration type of an integration. One of the following:
AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.
AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.
HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.
HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration.
MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.
integrationType
- The integration type of an integration. One of the following:
AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.
AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.
HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.
HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration.
MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.
IntegrationType
,
IntegrationType
CreateIntegrationResponse.Builder integrationType(IntegrationType integrationType)
The integration type of an integration. One of the following:
AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.
AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.
HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.
HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration.
MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.
integrationType
- The integration type of an integration. One of the following:
AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.
AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.
HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.
HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration.
MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.
IntegrationType
,
IntegrationType
CreateIntegrationResponse.Builder integrationUri(String integrationUri)
For a Lambda integration, specify the URI of a Lambda function.
For an HTTP integration, specify a fully-qualified URL.
For an HTTP API private integration, specify the ARN of an Application Load Balancer listener, Network Load Balancer listener, or AWS Cloud Map service. If you specify the ARN of an AWS Cloud Map service, API Gateway uses DiscoverInstances to identify resources. You can use query parameters to target specific resources. To learn more, see DiscoverInstances. For private integrations, all resources must be owned by the same AWS account.
integrationUri
- For a Lambda integration, specify the URI of a Lambda function.
For an HTTP integration, specify a fully-qualified URL.
For an HTTP API private integration, specify the ARN of an Application Load Balancer listener, Network Load Balancer listener, or AWS Cloud Map service. If you specify the ARN of an AWS Cloud Map service, API Gateway uses DiscoverInstances to identify resources. You can use query parameters to target specific resources. To learn more, see DiscoverInstances. For private integrations, all resources must be owned by the same AWS account.
CreateIntegrationResponse.Builder passthroughBehavior(String passthroughBehavior)
Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request, and the available mapping templates specified as the requestTemplates property on the Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER. Supported only for WebSocket APIs.
WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.
NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.
WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.
passthroughBehavior
- Specifies the pass-through behavior for incoming requests based on the Content-Type header in the
request, and the available mapping templates specified as the requestTemplates property on the
Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER.
Supported only for WebSocket APIs.
WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.
NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.
WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.
PassthroughBehavior
,
PassthroughBehavior
CreateIntegrationResponse.Builder passthroughBehavior(PassthroughBehavior passthroughBehavior)
Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request, and the available mapping templates specified as the requestTemplates property on the Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER. Supported only for WebSocket APIs.
WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.
NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.
WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.
passthroughBehavior
- Specifies the pass-through behavior for incoming requests based on the Content-Type header in the
request, and the available mapping templates specified as the requestTemplates property on the
Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER.
Supported only for WebSocket APIs.
WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.
NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.
WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.
PassthroughBehavior
,
PassthroughBehavior
CreateIntegrationResponse.Builder payloadFormatVersion(String payloadFormatVersion)
Specifies the format of the payload sent to an integration. Required for HTTP APIs.
payloadFormatVersion
- Specifies the format of the payload sent to an integration. Required for HTTP APIs.CreateIntegrationResponse.Builder requestParameters(Map<String,String> requestParameters)
For WebSocket APIs, a key-value map specifying request parameters that are passed from the method request to
the backend. The key is an integration request parameter name and the associated value is a method request
parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the
backend. The method request parameter value must match the pattern of
method.request.
For HTTP API integrations with a specified integrationSubtype, request parameters are a key-value map specifying parameters that are passed to AWS_PROXY integrations. You can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Working with AWS service integrations for HTTP APIs.
For HTTP API itegrations, without a specified integrationSubtype request parameters are a key-value map specifying how to transform HTTP requests before sending them to backend integrations. The key should follow the pattern <action>:<header|querystring|path>.<location>. The action can be append, overwrite or remove. For values, you can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.
requestParameters
- For WebSocket APIs, a key-value map specifying request parameters that are passed from the method
request to the backend. The key is an integration request parameter name and the associated value is a
method request parameter value or static value that must be enclosed within single quotes and
pre-encoded as required by the backend. The method request parameter value must match the pattern of
method.request.For HTTP API integrations with a specified integrationSubtype, request parameters are a key-value map specifying parameters that are passed to AWS_PROXY integrations. You can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Working with AWS service integrations for HTTP APIs.
For HTTP API itegrations, without a specified integrationSubtype request parameters are a key-value map specifying how to transform HTTP requests before sending them to backend integrations. The key should follow the pattern <action>:<header|querystring|path>.<location>. The action can be append, overwrite or remove. For values, you can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.
CreateIntegrationResponse.Builder requestTemplates(Map<String,String> requestTemplates)
Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value. Supported only for WebSocket APIs.
requestTemplates
- Represents a map of Velocity templates that are applied on the request payload based on the value of
the Content-Type header sent by the client. The content type value is the key in this map, and the
template (as a String) is the value. Supported only for WebSocket APIs.CreateIntegrationResponse.Builder responseParameters(Map<String,Map<String,String>> responseParameters)
Supported only for HTTP APIs. You use response parameters to transform the HTTP response from a backend integration before returning the response to clients. Specify a key-value map from a selection key to response parameters. The selection key must be a valid HTTP status code within the range of 200-599. Response parameters are a key-value map. The key must match pattern <action>:<header>.<location> or overwrite.statuscode. The action can be append, overwrite or remove. The value can be a static value, or map to response data, stage variables, or context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.
responseParameters
- Supported only for HTTP APIs. You use response parameters to transform the HTTP response from a
backend integration before returning the response to clients. Specify a key-value map from a selection
key to response parameters. The selection key must be a valid HTTP status code within the range of
200-599. Response parameters are a key-value map. The key must match pattern
<action>:<header>.<location> or overwrite.statuscode. The action can be append,
overwrite or remove. The value can be a static value, or map to response data, stage variables, or
context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.CreateIntegrationResponse.Builder templateSelectionExpression(String templateSelectionExpression)
The template selection expression for the integration. Supported only for WebSocket APIs.
templateSelectionExpression
- The template selection expression for the integration. Supported only for WebSocket APIs.CreateIntegrationResponse.Builder timeoutInMillis(Integer timeoutInMillis)
Custom timeout between 50 and 29,000 milliseconds for WebSocket APIs and between 50 and 30,000 milliseconds for HTTP APIs. The default timeout is 29 seconds for WebSocket APIs and 30 seconds for HTTP APIs.
timeoutInMillis
- Custom timeout between 50 and 29,000 milliseconds for WebSocket APIs and between 50 and 30,000
milliseconds for HTTP APIs. The default timeout is 29 seconds for WebSocket APIs and 30 seconds for
HTTP APIs.CreateIntegrationResponse.Builder tlsConfig(TlsConfig tlsConfig)
The TLS configuration for a private integration. If you specify a TLS configuration, private integration traffic uses the HTTPS protocol. Supported only for HTTP APIs.
tlsConfig
- The TLS configuration for a private integration. If you specify a TLS configuration, private
integration traffic uses the HTTPS protocol. Supported only for HTTP APIs.default CreateIntegrationResponse.Builder tlsConfig(Consumer<TlsConfig.Builder> tlsConfig)
The TLS configuration for a private integration. If you specify a TLS configuration, private integration traffic uses the HTTPS protocol. Supported only for HTTP APIs.
This is a convenience that creates an instance of theTlsConfig.Builder
avoiding the need to create
one manually via TlsConfig.builder()
.
When the Consumer
completes, SdkBuilder.build()
is called immediately and its result
is passed to tlsConfig(TlsConfig)
.tlsConfig
- a consumer that will call methods on TlsConfig.Builder
tlsConfig(TlsConfig)
Copyright © 2021 Amazon Web Services, Inc. All Rights Reserved.