Class CreateIntegrationRequest

All Implemented Interfaces:
SdkPojo, ToCopyableBuilder<CreateIntegrationRequest.Builder,CreateIntegrationRequest>

@Generated("software.amazon.awssdk:codegen") public final class CreateIntegrationRequest extends ApiGatewayV2Request implements ToCopyableBuilder<CreateIntegrationRequest.Builder,CreateIntegrationRequest>

Creates a new Integration resource to represent an integration.

  • Method Details

    • apiId

      public final String apiId()

      The API identifier.

      Returns:
      The API identifier.
    • connectionId

      public final String connectionId()

      The ID of the VPC link for a private integration. Supported only for HTTP APIs.

      Returns:
      The ID of the VPC link for a private integration. Supported only for HTTP APIs.
    • connectionType

      public final ConnectionType connectionType()

      The type of the network connection to the integration endpoint. Specify INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and resources in a VPC. The default value is INTERNET.

      If the service returns an enum value that is not available in the current SDK version, connectionType will return ConnectionType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from connectionTypeAsString().

      Returns:
      The type of the network connection to the integration endpoint. Specify INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and resources in a VPC. The default value is INTERNET.
      See Also:
    • connectionTypeAsString

      public final String connectionTypeAsString()

      The type of the network connection to the integration endpoint. Specify INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and resources in a VPC. The default value is INTERNET.

      If the service returns an enum value that is not available in the current SDK version, connectionType will return ConnectionType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from connectionTypeAsString().

      Returns:
      The type of the network connection to the integration endpoint. Specify INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and resources in a VPC. The default value is INTERNET.
      See Also:
    • contentHandlingStrategy

      public final ContentHandlingStrategy contentHandlingStrategy()

      Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.

      CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.

      If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.

      If the service returns an enum value that is not available in the current SDK version, contentHandlingStrategy will return ContentHandlingStrategy.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from contentHandlingStrategyAsString().

      Returns:
      Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.

      CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.

      If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.

      See Also:
    • contentHandlingStrategyAsString

      public final String contentHandlingStrategyAsString()

      Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.

      CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.

      If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.

      If the service returns an enum value that is not available in the current SDK version, contentHandlingStrategy will return ContentHandlingStrategy.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from contentHandlingStrategyAsString().

      Returns:
      Supported only for WebSocket APIs. Specifies how to handle response payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      CONVERT_TO_BINARY: Converts a response payload from a Base64-encoded string to the corresponding binary blob.

      CONVERT_TO_TEXT: Converts a response payload from a binary blob to a Base64-encoded string.

      If this property is not defined, the response payload will be passed through from the integration response to the route response or method response without modification.

      See Also:
    • credentialsArn

      public final String credentialsArn()

      Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::*:user/*. To use resource-based permissions on supported AWS services, specify null.

      Returns:
      Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::*:user/*. To use resource-based permissions on supported AWS services, specify null.
    • description

      public final String description()

      The description of the integration.

      Returns:
      The description of the integration.
    • integrationMethod

      public final String integrationMethod()

      Specifies the integration's HTTP method type.

      Returns:
      Specifies the integration's HTTP method type.
    • integrationSubtype

      public final String integrationSubtype()

      Supported only for HTTP API AWS_PROXY integrations. Specifies the AWS service action to invoke. To learn more, see Integration subtype reference.

      Returns:
      Supported only for HTTP API AWS_PROXY integrations. Specifies the AWS service action to invoke. To learn more, see Integration subtype reference.
    • integrationType

      public final IntegrationType integrationType()

      The integration type of an integration. One of the following:

      AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.

      AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.

      HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.

      HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration. For HTTP API private integrations, use an HTTP_PROXY integration.

      MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.

      If the service returns an enum value that is not available in the current SDK version, integrationType will return IntegrationType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from integrationTypeAsString().

      Returns:
      The integration type of an integration. One of the following:

      AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.

      AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.

      HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.

      HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration. For HTTP API private integrations, use an HTTP_PROXY integration.

      MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.

      See Also:
    • integrationTypeAsString

      public final String integrationTypeAsString()

      The integration type of an integration. One of the following:

      AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.

      AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.

      HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.

      HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration. For HTTP API private integrations, use an HTTP_PROXY integration.

      MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.

      If the service returns an enum value that is not available in the current SDK version, integrationType will return IntegrationType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from integrationTypeAsString().

      Returns:
      The integration type of an integration. One of the following:

      AWS: for integrating the route or method request with an AWS service action, including the Lambda function-invoking action. With the Lambda function-invoking action, this is referred to as the Lambda custom integration. With any other AWS service action, this is known as AWS integration. Supported only for WebSocket APIs.

      AWS_PROXY: for integrating the route or method request with a Lambda function or other AWS service action. This integration is also referred to as a Lambda proxy integration.

      HTTP: for integrating the route or method request with an HTTP endpoint. This integration is also referred to as the HTTP custom integration. Supported only for WebSocket APIs.

      HTTP_PROXY: for integrating the route or method request with an HTTP endpoint, with the client request passed through as-is. This is also referred to as HTTP proxy integration. For HTTP API private integrations, use an HTTP_PROXY integration.

      MOCK: for integrating the route or method request with API Gateway as a "loopback" endpoint without invoking any backend. Supported only for WebSocket APIs.

      See Also:
    • integrationUri

      public final String integrationUri()

      For a Lambda integration, specify the URI of a Lambda function.

      For an HTTP integration, specify a fully-qualified URL.

      For an HTTP API private integration, specify the ARN of an Application Load Balancer listener, Network Load Balancer listener, or AWS Cloud Map service. If you specify the ARN of an AWS Cloud Map service, API Gateway uses DiscoverInstances to identify resources. You can use query parameters to target specific resources. To learn more, see DiscoverInstances. For private integrations, all resources must be owned by the same AWS account.

      Returns:
      For a Lambda integration, specify the URI of a Lambda function.

      For an HTTP integration, specify a fully-qualified URL.

      For an HTTP API private integration, specify the ARN of an Application Load Balancer listener, Network Load Balancer listener, or AWS Cloud Map service. If you specify the ARN of an AWS Cloud Map service, API Gateway uses DiscoverInstances to identify resources. You can use query parameters to target specific resources. To learn more, see DiscoverInstances. For private integrations, all resources must be owned by the same AWS account.

    • passthroughBehavior

      public final PassthroughBehavior passthroughBehavior()

      Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request, and the available mapping templates specified as the requestTemplates property on the Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER. Supported only for WebSocket APIs.

      WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.

      NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.

      WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.

      If the service returns an enum value that is not available in the current SDK version, passthroughBehavior will return PassthroughBehavior.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from passthroughBehaviorAsString().

      Returns:
      Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request, and the available mapping templates specified as the requestTemplates property on the Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER. Supported only for WebSocket APIs.

      WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.

      NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.

      WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.

      See Also:
    • passthroughBehaviorAsString

      public final String passthroughBehaviorAsString()

      Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request, and the available mapping templates specified as the requestTemplates property on the Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER. Supported only for WebSocket APIs.

      WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.

      NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.

      WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.

      If the service returns an enum value that is not available in the current SDK version, passthroughBehavior will return PassthroughBehavior.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from passthroughBehaviorAsString().

      Returns:
      Specifies the pass-through behavior for incoming requests based on the Content-Type header in the request, and the available mapping templates specified as the requestTemplates property on the Integration resource. There are three valid values: WHEN_NO_MATCH, WHEN_NO_TEMPLATES, and NEVER. Supported only for WebSocket APIs.

      WHEN_NO_MATCH passes the request body for unmapped content types through to the integration backend without transformation.

      NEVER rejects unmapped content types with an HTTP 415 Unsupported Media Type response.

      WHEN_NO_TEMPLATES allows pass-through when the integration has no content types mapped to templates. However, if there is at least one content type defined, unmapped content types will be rejected with the same HTTP 415 Unsupported Media Type response.

      See Also:
    • payloadFormatVersion

      public final String payloadFormatVersion()

      Specifies the format of the payload sent to an integration. Required for HTTP APIs.

      Returns:
      Specifies the format of the payload sent to an integration. Required for HTTP APIs.
    • hasRequestParameters

      public final boolean hasRequestParameters()
      For responses, this returns true if the service returned a value for the RequestParameters property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • requestParameters

      public final Map<String,String> requestParameters()

      For WebSocket APIs, a key-value map specifying request parameters that are passed from the method request to the backend. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the backend. The method request parameter value must match the pattern of method.request.{location}.{name} , where {location} is querystring, path, or header; and {name} must be a valid and unique method request parameter name.

      For HTTP API integrations with a specified integrationSubtype, request parameters are a key-value map specifying parameters that are passed to AWS_PROXY integrations. You can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Working with AWS service integrations for HTTP APIs.

      For HTTP API integrations without a specified integrationSubtype request parameters are a key-value map specifying how to transform HTTP requests before sending them to the backend. The key should follow the pattern <action>:<header|querystring|path>.<location> where action can be append, overwrite or remove. For values, you can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasRequestParameters() method.

      Returns:
      For WebSocket APIs, a key-value map specifying request parameters that are passed from the method request to the backend. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the backend. The method request parameter value must match the pattern of method.request.{location}.{name} , where {location} is querystring, path, or header; and {name} must be a valid and unique method request parameter name.

      For HTTP API integrations with a specified integrationSubtype, request parameters are a key-value map specifying parameters that are passed to AWS_PROXY integrations. You can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Working with AWS service integrations for HTTP APIs.

      For HTTP API integrations without a specified integrationSubtype request parameters are a key-value map specifying how to transform HTTP requests before sending them to the backend. The key should follow the pattern <action>:<header|querystring|path>.<location> where action can be append, overwrite or remove. For values, you can provide static values, or map request data, stage variables, or context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.

    • hasRequestTemplates

      public final boolean hasRequestTemplates()
      For responses, this returns true if the service returned a value for the RequestTemplates property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • requestTemplates

      public final Map<String,String> requestTemplates()

      Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value. Supported only for WebSocket APIs.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasRequestTemplates() method.

      Returns:
      Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value. Supported only for WebSocket APIs.
    • hasResponseParameters

      public final boolean hasResponseParameters()
      For responses, this returns true if the service returned a value for the ResponseParameters property. This DOES NOT check that the value is non-empty (for which, you should check the isEmpty() method on the property). This is useful because the SDK will never return a null collection or map, but you may need to differentiate between the service returning nothing (or null) and the service returning an empty collection or map. For requests, this returns true if a value for the property was specified in the request builder, and false if a value was not specified.
    • responseParameters

      public final Map<String,Map<String,String>> responseParameters()

      Supported only for HTTP APIs. You use response parameters to transform the HTTP response from a backend integration before returning the response to clients. Specify a key-value map from a selection key to response parameters. The selection key must be a valid HTTP status code within the range of 200-599. Response parameters are a key-value map. The key must match pattern <action>:<header>.<location> or overwrite.statuscode. The action can be append, overwrite or remove. The value can be a static value, or map to response data, stage variables, or context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.

      Attempts to modify the collection returned by this method will result in an UnsupportedOperationException.

      This method will never return null. If you would like to know whether the service returned this field (so that you can differentiate between null and empty), you can use the hasResponseParameters() method.

      Returns:
      Supported only for HTTP APIs. You use response parameters to transform the HTTP response from a backend integration before returning the response to clients. Specify a key-value map from a selection key to response parameters. The selection key must be a valid HTTP status code within the range of 200-599. Response parameters are a key-value map. The key must match pattern <action>:<header>.<location> or overwrite.statuscode. The action can be append, overwrite or remove. The value can be a static value, or map to response data, stage variables, or context variables that are evaluated at runtime. To learn more, see Transforming API requests and responses.
    • templateSelectionExpression

      public final String templateSelectionExpression()

      The template selection expression for the integration.

      Returns:
      The template selection expression for the integration.
    • timeoutInMillis

      public final Integer timeoutInMillis()

      Custom timeout between 50 and 29,000 milliseconds for WebSocket APIs and between 50 and 30,000 milliseconds for HTTP APIs. The default timeout is 29 seconds for WebSocket APIs and 30 seconds for HTTP APIs.

      Returns:
      Custom timeout between 50 and 29,000 milliseconds for WebSocket APIs and between 50 and 30,000 milliseconds for HTTP APIs. The default timeout is 29 seconds for WebSocket APIs and 30 seconds for HTTP APIs.
    • tlsConfig

      public final TlsConfigInput tlsConfig()

      The TLS configuration for a private integration. If you specify a TLS configuration, private integration traffic uses the HTTPS protocol. Supported only for HTTP APIs.

      Returns:
      The TLS configuration for a private integration. If you specify a TLS configuration, private integration traffic uses the HTTPS protocol. Supported only for HTTP APIs.
    • toBuilder

      Description copied from interface: ToCopyableBuilder
      Take this object and create a builder that contains all of the current property values of this object.
      Specified by:
      toBuilder in interface ToCopyableBuilder<CreateIntegrationRequest.Builder,CreateIntegrationRequest>
      Specified by:
      toBuilder in class ApiGatewayV2Request
      Returns:
      a builder for type T
    • builder

      public static CreateIntegrationRequest.Builder builder()
    • serializableBuilderClass

      public static Class<? extends CreateIntegrationRequest.Builder> serializableBuilderClass()
    • hashCode

      public final int hashCode()
      Overrides:
      hashCode in class AwsRequest
    • equals

      public final boolean equals(Object obj)
      Overrides:
      equals in class AwsRequest
    • equalsBySdkFields

      public final boolean equalsBySdkFields(Object obj)
      Description copied from interface: SdkPojo
      Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in an SdkPojo class, and is generated based on a service model.

      If an SdkPojo class does not have any inherited fields, equalsBySdkFields and equals are essentially the same.

      Specified by:
      equalsBySdkFields in interface SdkPojo
      Parameters:
      obj - the object to be compared with
      Returns:
      true if the other object equals to this object by sdk fields, false otherwise.
    • toString

      public final String toString()
      Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
      Overrides:
      toString in class Object
    • getValueForField

      public final <T> Optional<T> getValueForField(String fieldName, Class<T> clazz)
      Description copied from class: SdkRequest
      Used to retrieve the value of a field from any class that extends SdkRequest. The field name specified should match the member name from the corresponding service-2.json model specified in the codegen-resources folder for a given service. The class specifies what class to cast the returned value to. If the returned value is also a modeled class, the SdkRequest.getValueForField(String, Class) method will again be available.
      Overrides:
      getValueForField in class SdkRequest
      Parameters:
      fieldName - The name of the member to be retrieved.
      clazz - The class to cast the returned object to.
      Returns:
      Optional containing the casted return value
    • sdkFields

      public final List<SdkField<?>> sdkFields()
      Specified by:
      sdkFields in interface SdkPojo
      Returns:
      List of SdkField in this POJO. May be empty list but should never be null.