Package software.amazon.awssdk.services.apigateway.model

Interface UpdateIntegrationResponse.Builder

All Superinterfaces:
ApiGatewayResponse.Builder, AwsResponse.Builder, Buildable, CopyableBuilder<UpdateIntegrationResponse.Builder,UpdateIntegrationResponse>, SdkBuilder<UpdateIntegrationResponse.Builder,UpdateIntegrationResponse>, SdkPojo, SdkResponse.Builder
Enclosing class:
UpdateIntegrationResponse
public static interface UpdateIntegrationResponse.Builder extends ApiGatewayResponse.Builder, SdkPojo, CopyableBuilder<UpdateIntegrationResponse.Builder,UpdateIntegrationResponse>

  • Method Details

    • type

      UpdateIntegrationResponse.Builder type(String type)

      Specifies an API method integration type. The valid value is one of the following:

      For the HTTP and HTTP proxy integrations, each integration can specify a protocol (http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

      Parameters:
      type - Specifies an API method integration type. The valid value is one of the following:

      For the HTTP and HTTP proxy integrations, each integration can specify a protocol ( http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • type

      UpdateIntegrationResponse.Builder type(IntegrationType type)

      Specifies an API method integration type. The valid value is one of the following:

      For the HTTP and HTTP proxy integrations, each integration can specify a protocol (http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

      Parameters:
      type - Specifies an API method integration type. The valid value is one of the following:

      For the HTTP and HTTP proxy integrations, each integration can specify a protocol ( http/https), port and path. Standard 80 and 443 ports are supported as well as custom ports above 1024. An HTTP or HTTP proxy integration with a connectionType of VPC_LINK is referred to as a private integration and uses a VpcLink to connect API Gateway to a network load balancer of a VPC.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • httpMethod

      UpdateIntegrationResponse.Builder httpMethod(String httpMethod)

      Specifies the integration's HTTP method type. For the Type property, if you specify MOCK, this property is optional. For Lambda integrations, you must set the integration method to POST. For all other types, you must specify this property.

      Parameters:
      httpMethod - Specifies the integration's HTTP method type. For the Type property, if you specify MOCK, this property is optional. For Lambda integrations, you must set the integration method to POST. For all other types, you must specify this property.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • uri

      UpdateIntegrationResponse.Builder uri(String uri)

      Specifies Uniform Resource Identifier (URI) of the integration endpoint.

      For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification for standard integrations. If connectionType is VPC_LINK specify the Network Load Balancer DNS name. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}. Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an Amazon Web Services service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

      Parameters:
      uri - Specifies Uniform Resource Identifier (URI) of the integration endpoint.

      For HTTP or HTTP_PROXY integrations, the URI must be a fully formed, encoded HTTP(S) URL according to the RFC-3986 specification for standard integrations. If connectionType is VPC_LINK specify the Network Load Balancer DNS name. For AWS or AWS_PROXY integrations, the URI is of the form arn:aws:apigateway:{region}:{subdomain.service|service}:path|action/{service_api}. Here, {Region} is the API Gateway region (e.g., us-east-1); {service} is the name of the integrated Amazon Web Services service (e.g., s3); and {subdomain} is a designated subdomain supported by certain Amazon Web Services service for fast host-name lookup. action can be used for an Amazon Web Services service action-based API, using an Action={name}&{p1}={v1}&p2={v2}... query string. The ensuing {service_api} refers to a supported action {name} plus any required input parameters. Alternatively, path can be used for an Amazon Web Services service path-based API. The ensuing service_api refers to the path to an Amazon Web Services service resource, including the region of the integrated Amazon Web Services service, if applicable. For example, for integration with the S3 API of GetObject, the uri can be either arn:aws:apigateway:us-west-2:s3:action/GetObject&Bucket={bucket}&Key={key} or arn:aws:apigateway:us-west-2:s3:path/{bucket}/{key}

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • connectionType

      UpdateIntegrationResponse.Builder connectionType(String connectionType)

      The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.

      Parameters:
      connectionType - The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • connectionType

      UpdateIntegrationResponse.Builder connectionType(ConnectionType connectionType)

      The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.

      Parameters:
      connectionType - The type of the network connection to the integration endpoint. The valid value is INTERNET for connections through the public routable internet or VPC_LINK for private connections between API Gateway and a network load balancer in a VPC. The default value is INTERNET.
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • connectionId

      UpdateIntegrationResponse.Builder connectionId(String connectionId)

      The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.

      Parameters:
      connectionId - The ID of the VpcLink used for the integration when connectionType=VPC_LINK and undefined, otherwise.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • credentials

      UpdateIntegrationResponse.Builder credentials(String credentials)

      Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\*. To use resource-based permissions on supported Amazon Web Services services, specify null.

      Parameters:
      credentials - Specifies the credentials required for the integration, if any. For AWS integrations, three options are available. To specify an IAM Role for API Gateway to assume, use the role's Amazon Resource Name (ARN). To require that the caller's identity be passed through from the request, specify the string arn:aws:iam::\*:user/\*. To use resource-based permissions on supported Amazon Web Services services, specify null.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • requestParameters

      UpdateIntegrationResponse.Builder requestParameters(Map<String,String> requestParameters)

      A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name}, where location is querystring, path, or header and name must be a valid and unique method request parameter name.

      Parameters:
      requestParameters - A key-value map specifying request parameters that are passed from the method request to the back end. The key is an integration request parameter name and the associated value is a method request parameter value or static value that must be enclosed within single quotes and pre-encoded as required by the back end. The method request parameter value must match the pattern of method.request.{location}.{name}, where location is querystring , path, or header and name must be a valid and unique method request parameter name.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • requestTemplates

      UpdateIntegrationResponse.Builder requestTemplates(Map<String,String> requestTemplates)

      Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.

      Parameters:
      requestTemplates - Represents a map of Velocity templates that are applied on the request payload based on the value of the Content-Type header sent by the client. The content type value is the key in this map, and the template (as a String) is the value.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • passthroughBehavior

      UpdateIntegrationResponse.Builder passthroughBehavior(String passthroughBehavior)

      Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates. The valid value is one of the following: WHEN_NO_MATCH: passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES: passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER: rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.

      Parameters:
      passthroughBehavior - Specifies how the method request body of an unmapped content type will be passed through the integration request to the back end without transformation. A content type is unmapped if no mapping template is defined in the integration or the content type does not match any of the mapped content types, as specified in requestTemplates. The valid value is one of the following: WHEN_NO_MATCH: passes the method request body through the integration request to the back end without transformation when the method request content type does not match any content type associated with the mapping templates defined in the integration request. WHEN_NO_TEMPLATES: passes the method request body through the integration request to the back end without transformation when no mapping template is defined in the integration request. If a template is defined when this option is selected, the method request of an unmapped content-type will be rejected with an HTTP 415 Unsupported Media Type response. NEVER: rejects the method request with an HTTP 415 Unsupported Media Type response when either the method request content type does not match any content type associated with the mapping templates defined in the integration request or no mapping template is defined in the integration request.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • contentHandling

      UpdateIntegrationResponse.Builder contentHandling(String contentHandling)

      Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

      Parameters:
      contentHandling - Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • contentHandling

      UpdateIntegrationResponse.Builder contentHandling(ContentHandlingStrategy contentHandling)

      Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

      Parameters:
      contentHandling - Specifies how to handle request payload content type conversions. Supported values are CONVERT_TO_BINARY and CONVERT_TO_TEXT, with the following behaviors:

      If this property is not defined, the request payload will be passed through from the method request to integration request without modification, provided that the passthroughBehavior is configured to support payload pass-through.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • timeoutInMillis

      UpdateIntegrationResponse.Builder timeoutInMillis(Integer timeoutInMillis)

      Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.

      Parameters:
      timeoutInMillis - Custom timeout between 50 and 29,000 milliseconds. The default value is 29,000 milliseconds or 29 seconds.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • cacheNamespace

      UpdateIntegrationResponse.Builder cacheNamespace(String cacheNamespace)

      Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace. You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.

      Parameters:
      cacheNamespace - Specifies a group of related cached parameters. By default, API Gateway uses the resource ID as the cacheNamespace. You can specify the same cacheNamespace across resources to return the same cached data for requests to different resources.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • cacheKeyParameters

      UpdateIntegrationResponse.Builder cacheKeyParameters(Collection<String> cacheKeyParameters)

      A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.

      Parameters:
      cacheKeyParameters - A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • cacheKeyParameters

      UpdateIntegrationResponse.Builder cacheKeyParameters(String... cacheKeyParameters)

      A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.

      Parameters:
      cacheKeyParameters - A list of request parameters whose values API Gateway caches. To be valid values for cacheKeyParameters, these parameters must also be specified for Method requestParameters.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • integrationResponses

      UpdateIntegrationResponse.Builder integrationResponses(Map<String,IntegrationResponse> integrationResponses)

      Specifies the integration's responses.

      Parameters:
      integrationResponses - Specifies the integration's responses.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • tlsConfig

      UpdateIntegrationResponse.Builder tlsConfig(TlsConfig tlsConfig)

      Specifies the TLS configuration for an integration.

      Parameters:
      tlsConfig - Specifies the TLS configuration for an integration.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • tlsConfig

      default UpdateIntegrationResponse.Builder tlsConfig(Consumer<TlsConfig.Builder> tlsConfig)

      Specifies the TLS configuration for an integration.

      This is a convenience method that creates an instance of the TlsConfig.Builder avoiding the need to create one manually via TlsConfig.builder().

      When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to tlsConfig(TlsConfig).

      Parameters:
      tlsConfig - a consumer that will call methods on TlsConfig.Builder
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also: