Interface MTurkClient

All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface MTurkClient
extends AwsClient

Service client for accessing Amazon MTurk. This can be created using the static builder() method. Amazon Mechanical Turk API Reference

Field Summary

Fields

Modifier and Type	Field	Description
static final String	SERVICE_METADATA_ID	Value for looking up the service's metadata from the ServiceMetadataProvider.
static final String	SERVICE_NAME

Method Summary

Modifier and Type	Method	Description
default AcceptQualificationRequestResponse	acceptQualificationRequest(Consumer<AcceptQualificationRequestRequest.Builder> acceptQualificationRequestRequest)	The AcceptQualificationRequest operation approves a Worker's request for a Qualification.
default AcceptQualificationRequestResponse	acceptQualificationRequest(AcceptQualificationRequestRequest acceptQualificationRequestRequest)	The AcceptQualificationRequest operation approves a Worker's request for a Qualification.
default ApproveAssignmentResponse	approveAssignment(Consumer<ApproveAssignmentRequest.Builder> approveAssignmentRequest)	The ApproveAssignment operation approves the results of a completed assignment.
default ApproveAssignmentResponse	approveAssignment(ApproveAssignmentRequest approveAssignmentRequest)	The ApproveAssignment operation approves the results of a completed assignment.
default AssociateQualificationWithWorkerResponse	associateQualificationWithWorker(Consumer<AssociateQualificationWithWorkerRequest.Builder> associateQualificationWithWorkerRequest)	The AssociateQualificationWithWorker operation gives a Worker a Qualification.
default AssociateQualificationWithWorkerResponse	associateQualificationWithWorker(AssociateQualificationWithWorkerRequest associateQualificationWithWorkerRequest)	The AssociateQualificationWithWorker operation gives a Worker a Qualification.
static MTurkClientBuilder	builder()	Create a builder that can be used to configure and create a MTurkClient.
static MTurkClient	create()	Create a MTurkClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
default CreateAdditionalAssignmentsForHitResponse	createAdditionalAssignmentsForHIT(Consumer<CreateAdditionalAssignmentsForHitRequest.Builder> createAdditionalAssignmentsForHitRequest)	The CreateAdditionalAssignmentsForHIT operation increases the maximum number of assignments of an existing HIT.
default CreateAdditionalAssignmentsForHitResponse	createAdditionalAssignmentsForHIT(CreateAdditionalAssignmentsForHitRequest createAdditionalAssignmentsForHitRequest)	The CreateAdditionalAssignmentsForHIT operation increases the maximum number of assignments of an existing HIT.
default CreateHitResponse	createHIT(Consumer<CreateHitRequest.Builder> createHitRequest)	The CreateHIT operation creates a new Human Intelligence Task (HIT).
default CreateHitResponse	createHIT(CreateHitRequest createHitRequest)	The CreateHIT operation creates a new Human Intelligence Task (HIT).
default CreateHitTypeResponse	createHITType(Consumer<CreateHitTypeRequest.Builder> createHitTypeRequest)	The CreateHITType operation creates a new HIT type.
default CreateHitTypeResponse	createHITType(CreateHitTypeRequest createHitTypeRequest)	The CreateHITType operation creates a new HIT type.
default CreateHitWithHitTypeResponse	createHITWithHITType(Consumer<CreateHitWithHitTypeRequest.Builder> createHitWithHitTypeRequest)	The CreateHITWithHITType operation creates a new Human Intelligence Task (HIT) using an existing HITTypeID generated by the CreateHITType operation.
default CreateHitWithHitTypeResponse	createHITWithHITType(CreateHitWithHitTypeRequest createHitWithHitTypeRequest)	The CreateHITWithHITType operation creates a new Human Intelligence Task (HIT) using an existing HITTypeID generated by the CreateHITType operation.
default CreateQualificationTypeResponse	createQualificationType(Consumer<CreateQualificationTypeRequest.Builder> createQualificationTypeRequest)	The CreateQualificationType operation creates a new Qualification type, which is represented by a QualificationType data structure.
default CreateQualificationTypeResponse	createQualificationType(CreateQualificationTypeRequest createQualificationTypeRequest)	The CreateQualificationType operation creates a new Qualification type, which is represented by a QualificationType data structure.
default CreateWorkerBlockResponse	createWorkerBlock(Consumer<CreateWorkerBlockRequest.Builder> createWorkerBlockRequest)	The CreateWorkerBlock operation allows you to prevent a Worker from working on your HITs.
default CreateWorkerBlockResponse	createWorkerBlock(CreateWorkerBlockRequest createWorkerBlockRequest)	The CreateWorkerBlock operation allows you to prevent a Worker from working on your HITs.
default DeleteHitResponse	deleteHIT(Consumer<DeleteHitRequest.Builder> deleteHitRequest)	The DeleteHIT operation is used to delete HIT that is no longer needed.
default DeleteHitResponse	deleteHIT(DeleteHitRequest deleteHitRequest)	The DeleteHIT operation is used to delete HIT that is no longer needed.
default DeleteQualificationTypeResponse	deleteQualificationType(Consumer<DeleteQualificationTypeRequest.Builder> deleteQualificationTypeRequest)	The DeleteQualificationType deletes a Qualification type and deletes any HIT types that are associated with the Qualification type.
default DeleteQualificationTypeResponse	deleteQualificationType(DeleteQualificationTypeRequest deleteQualificationTypeRequest)	The DeleteQualificationType deletes a Qualification type and deletes any HIT types that are associated with the Qualification type.
default DeleteWorkerBlockResponse	deleteWorkerBlock(Consumer<DeleteWorkerBlockRequest.Builder> deleteWorkerBlockRequest)	The DeleteWorkerBlock operation allows you to reinstate a blocked Worker to work on your HITs.
default DeleteWorkerBlockResponse	deleteWorkerBlock(DeleteWorkerBlockRequest deleteWorkerBlockRequest)	The DeleteWorkerBlock operation allows you to reinstate a blocked Worker to work on your HITs.
default DisassociateQualificationFromWorkerResponse	disassociateQualificationFromWorker(Consumer<DisassociateQualificationFromWorkerRequest.Builder> disassociateQualificationFromWorkerRequest)	The DisassociateQualificationFromWorker revokes a previously granted Qualification from a user.
default DisassociateQualificationFromWorkerResponse	disassociateQualificationFromWorker(DisassociateQualificationFromWorkerRequest disassociateQualificationFromWorkerRequest)	The DisassociateQualificationFromWorker revokes a previously granted Qualification from a user.
default GetAccountBalanceResponse	getAccountBalance()	The GetAccountBalance operation retrieves the Prepaid HITs balance in your Amazon Mechanical Turk account if you are a Prepaid Requester.
default GetAccountBalanceResponse	getAccountBalance(Consumer<GetAccountBalanceRequest.Builder> getAccountBalanceRequest)	The GetAccountBalance operation retrieves the Prepaid HITs balance in your Amazon Mechanical Turk account if you are a Prepaid Requester.
default GetAccountBalanceResponse	getAccountBalance(GetAccountBalanceRequest getAccountBalanceRequest)	The GetAccountBalance operation retrieves the Prepaid HITs balance in your Amazon Mechanical Turk account if you are a Prepaid Requester.
default GetAssignmentResponse	getAssignment(Consumer<GetAssignmentRequest.Builder> getAssignmentRequest)	The GetAssignment operation retrieves the details of the specified Assignment.
default GetAssignmentResponse	getAssignment(GetAssignmentRequest getAssignmentRequest)	The GetAssignment operation retrieves the details of the specified Assignment.
default GetFileUploadUrlResponse	getFileUploadURL(Consumer<GetFileUploadUrlRequest.Builder> getFileUploadUrlRequest)	The GetFileUploadURL operation generates and returns a temporary URL.
default GetFileUploadUrlResponse	getFileUploadURL(GetFileUploadUrlRequest getFileUploadUrlRequest)	The GetFileUploadURL operation generates and returns a temporary URL.
default GetHitResponse	getHIT(Consumer<GetHitRequest.Builder> getHitRequest)	The GetHIT operation retrieves the details of the specified HIT.
default GetHitResponse	getHIT(GetHitRequest getHitRequest)	The GetHIT operation retrieves the details of the specified HIT.
default GetQualificationScoreResponse	getQualificationScore(Consumer<GetQualificationScoreRequest.Builder> getQualificationScoreRequest)	The GetQualificationScore operation returns the value of a Worker's Qualification for a given Qualification type.
default GetQualificationScoreResponse	getQualificationScore(GetQualificationScoreRequest getQualificationScoreRequest)	The GetQualificationScore operation returns the value of a Worker's Qualification for a given Qualification type.
default GetQualificationTypeResponse	getQualificationType(Consumer<GetQualificationTypeRequest.Builder> getQualificationTypeRequest)	The GetQualificationTypeoperation retrieves information about a Qualification type using its ID.
default GetQualificationTypeResponse	getQualificationType(GetQualificationTypeRequest getQualificationTypeRequest)	The GetQualificationTypeoperation retrieves information about a Qualification type using its ID.
default ListAssignmentsForHitResponse	listAssignmentsForHIT(Consumer<ListAssignmentsForHitRequest.Builder> listAssignmentsForHitRequest)	The ListAssignmentsForHIT operation retrieves completed assignments for a HIT.
default ListAssignmentsForHitResponse	listAssignmentsForHIT(ListAssignmentsForHitRequest listAssignmentsForHitRequest)	The ListAssignmentsForHIT operation retrieves completed assignments for a HIT.
default ListAssignmentsForHITIterable	listAssignmentsForHITPaginator(Consumer<ListAssignmentsForHitRequest.Builder> listAssignmentsForHitRequest)	This is a variant of listAssignmentsForHIT(software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitRequest) operation.
default ListAssignmentsForHITIterable	listAssignmentsForHITPaginator(ListAssignmentsForHitRequest listAssignmentsForHitRequest)	This is a variant of listAssignmentsForHIT(software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitRequest) operation.
default ListBonusPaymentsResponse	listBonusPayments(Consumer<ListBonusPaymentsRequest.Builder> listBonusPaymentsRequest)	The ListBonusPayments operation retrieves the amounts of bonuses you have paid to Workers for a given HIT or assignment.
default ListBonusPaymentsResponse	listBonusPayments(ListBonusPaymentsRequest listBonusPaymentsRequest)	The ListBonusPayments operation retrieves the amounts of bonuses you have paid to Workers for a given HIT or assignment.
default ListBonusPaymentsIterable	listBonusPaymentsPaginator(Consumer<ListBonusPaymentsRequest.Builder> listBonusPaymentsRequest)	This is a variant of listBonusPayments(software.amazon.awssdk.services.mturk.model.ListBonusPaymentsRequest) operation.
default ListBonusPaymentsIterable	listBonusPaymentsPaginator(ListBonusPaymentsRequest listBonusPaymentsRequest)	This is a variant of listBonusPayments(software.amazon.awssdk.services.mturk.model.ListBonusPaymentsRequest) operation.
default ListHiTsResponse	listHITs()	The ListHITs operation returns all of a Requester's HITs.
default ListHiTsResponse	listHITs(Consumer<ListHiTsRequest.Builder> listHiTsRequest)	The ListHITs operation returns all of a Requester's HITs.
default ListHiTsResponse	listHITs(ListHiTsRequest listHiTsRequest)	The ListHITs operation returns all of a Requester's HITs.
default ListHiTsForQualificationTypeResponse	listHITsForQualificationType(Consumer<ListHiTsForQualificationTypeRequest.Builder> listHiTsForQualificationTypeRequest)	The ListHITsForQualificationType operation returns the HITs that use the given Qualification type for a Qualification requirement.
default ListHiTsForQualificationTypeResponse	listHITsForQualificationType(ListHiTsForQualificationTypeRequest listHiTsForQualificationTypeRequest)	The ListHITsForQualificationType operation returns the HITs that use the given Qualification type for a Qualification requirement.
default ListHITsForQualificationTypeIterable	listHITsForQualificationTypePaginator(Consumer<ListHiTsForQualificationTypeRequest.Builder> listHiTsForQualificationTypeRequest)	This is a variant of listHITsForQualificationType(software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeRequest) operation.
default ListHITsForQualificationTypeIterable	listHITsForQualificationTypePaginator(ListHiTsForQualificationTypeRequest listHiTsForQualificationTypeRequest)	This is a variant of listHITsForQualificationType(software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeRequest) operation.
default ListHITsIterable	listHITsPaginator()	This is a variant of listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation.
default ListHITsIterable	listHITsPaginator(Consumer<ListHiTsRequest.Builder> listHiTsRequest)	This is a variant of listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation.
default ListHITsIterable	listHITsPaginator(ListHiTsRequest listHiTsRequest)	This is a variant of listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation.
default ListQualificationRequestsResponse	listQualificationRequests()	The ListQualificationRequests operation retrieves requests for Qualifications of a particular Qualification type.
default ListQualificationRequestsResponse	listQualificationRequests(Consumer<ListQualificationRequestsRequest.Builder> listQualificationRequestsRequest)	The ListQualificationRequests operation retrieves requests for Qualifications of a particular Qualification type.
default ListQualificationRequestsResponse	listQualificationRequests(ListQualificationRequestsRequest listQualificationRequestsRequest)	The ListQualificationRequests operation retrieves requests for Qualifications of a particular Qualification type.
default ListQualificationRequestsIterable	listQualificationRequestsPaginator()	This is a variant of listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation.
default ListQualificationRequestsIterable	listQualificationRequestsPaginator(Consumer<ListQualificationRequestsRequest.Builder> listQualificationRequestsRequest)	This is a variant of listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation.
default ListQualificationRequestsIterable	listQualificationRequestsPaginator(ListQualificationRequestsRequest listQualificationRequestsRequest)	This is a variant of listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation.
default ListQualificationTypesResponse	listQualificationTypes(Consumer<ListQualificationTypesRequest.Builder> listQualificationTypesRequest)	The ListQualificationTypes operation returns a list of Qualification types, filtered by an optional search term.
default ListQualificationTypesResponse	listQualificationTypes(ListQualificationTypesRequest listQualificationTypesRequest)	The ListQualificationTypes operation returns a list of Qualification types, filtered by an optional search term.
default ListQualificationTypesIterable	listQualificationTypesPaginator(Consumer<ListQualificationTypesRequest.Builder> listQualificationTypesRequest)	This is a variant of listQualificationTypes(software.amazon.awssdk.services.mturk.model.ListQualificationTypesRequest) operation.
default ListQualificationTypesIterable	listQualificationTypesPaginator(ListQualificationTypesRequest listQualificationTypesRequest)	This is a variant of listQualificationTypes(software.amazon.awssdk.services.mturk.model.ListQualificationTypesRequest) operation.
default ListReviewableHiTsResponse	listReviewableHITs()	The ListReviewableHITs operation retrieves the HITs with Status equal to Reviewable or Status equal to Reviewing that belong to the Requester calling the operation.
default ListReviewableHiTsResponse	listReviewableHITs(Consumer<ListReviewableHiTsRequest.Builder> listReviewableHiTsRequest)	The ListReviewableHITs operation retrieves the HITs with Status equal to Reviewable or Status equal to Reviewing that belong to the Requester calling the operation.
default ListReviewableHiTsResponse	listReviewableHITs(ListReviewableHiTsRequest listReviewableHiTsRequest)	The ListReviewableHITs operation retrieves the HITs with Status equal to Reviewable or Status equal to Reviewing that belong to the Requester calling the operation.
default ListReviewableHITsIterable	listReviewableHITsPaginator()	This is a variant of listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation.
default ListReviewableHITsIterable	listReviewableHITsPaginator(Consumer<ListReviewableHiTsRequest.Builder> listReviewableHiTsRequest)	This is a variant of listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation.
default ListReviewableHITsIterable	listReviewableHITsPaginator(ListReviewableHiTsRequest listReviewableHiTsRequest)	This is a variant of listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation.
default ListReviewPolicyResultsForHitResponse	listReviewPolicyResultsForHIT(Consumer<ListReviewPolicyResultsForHitRequest.Builder> listReviewPolicyResultsForHitRequest)	The ListReviewPolicyResultsForHIT operation retrieves the computed results and the actions taken in the course of executing your Review Policies for a given HIT.
default ListReviewPolicyResultsForHitResponse	listReviewPolicyResultsForHIT(ListReviewPolicyResultsForHitRequest listReviewPolicyResultsForHitRequest)	The ListReviewPolicyResultsForHIT operation retrieves the computed results and the actions taken in the course of executing your Review Policies for a given HIT.
default ListReviewPolicyResultsForHITIterable	listReviewPolicyResultsForHITPaginator(Consumer<ListReviewPolicyResultsForHitRequest.Builder> listReviewPolicyResultsForHitRequest)	This is a variant of listReviewPolicyResultsForHIT(software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitRequest) operation.
default ListReviewPolicyResultsForHITIterable	listReviewPolicyResultsForHITPaginator(ListReviewPolicyResultsForHitRequest listReviewPolicyResultsForHitRequest)	This is a variant of listReviewPolicyResultsForHIT(software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitRequest) operation.
default ListWorkerBlocksResponse	listWorkerBlocks()	The ListWorkersBlocks operation retrieves a list of Workers who are blocked from working on your HITs.
default ListWorkerBlocksResponse	listWorkerBlocks(Consumer<ListWorkerBlocksRequest.Builder> listWorkerBlocksRequest)	The ListWorkersBlocks operation retrieves a list of Workers who are blocked from working on your HITs.
default ListWorkerBlocksResponse	listWorkerBlocks(ListWorkerBlocksRequest listWorkerBlocksRequest)	The ListWorkersBlocks operation retrieves a list of Workers who are blocked from working on your HITs.
default ListWorkerBlocksIterable	listWorkerBlocksPaginator()	This is a variant of listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation.
default ListWorkerBlocksIterable	listWorkerBlocksPaginator(Consumer<ListWorkerBlocksRequest.Builder> listWorkerBlocksRequest)	This is a variant of listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation.
default ListWorkerBlocksIterable	listWorkerBlocksPaginator(ListWorkerBlocksRequest listWorkerBlocksRequest)	This is a variant of listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation.
default ListWorkersWithQualificationTypeResponse	listWorkersWithQualificationType(Consumer<ListWorkersWithQualificationTypeRequest.Builder> listWorkersWithQualificationTypeRequest)	The ListWorkersWithQualificationType operation returns all of the Workers that have been associated with a given Qualification type.
default ListWorkersWithQualificationTypeResponse	listWorkersWithQualificationType(ListWorkersWithQualificationTypeRequest listWorkersWithQualificationTypeRequest)	The ListWorkersWithQualificationType operation returns all of the Workers that have been associated with a given Qualification type.
default ListWorkersWithQualificationTypeIterable	listWorkersWithQualificationTypePaginator(Consumer<ListWorkersWithQualificationTypeRequest.Builder> listWorkersWithQualificationTypeRequest)	This is a variant of listWorkersWithQualificationType(software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeRequest) operation.
default ListWorkersWithQualificationTypeIterable	listWorkersWithQualificationTypePaginator(ListWorkersWithQualificationTypeRequest listWorkersWithQualificationTypeRequest)	This is a variant of listWorkersWithQualificationType(software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeRequest) operation.
default NotifyWorkersResponse	notifyWorkers(Consumer<NotifyWorkersRequest.Builder> notifyWorkersRequest)	The NotifyWorkers operation sends an email to one or more Workers that you specify with the Worker ID.
default NotifyWorkersResponse	notifyWorkers(NotifyWorkersRequest notifyWorkersRequest)	The NotifyWorkers operation sends an email to one or more Workers that you specify with the Worker ID.
default RejectAssignmentResponse	rejectAssignment(Consumer<RejectAssignmentRequest.Builder> rejectAssignmentRequest)	The RejectAssignment operation rejects the results of a completed assignment.
default RejectAssignmentResponse	rejectAssignment(RejectAssignmentRequest rejectAssignmentRequest)	The RejectAssignment operation rejects the results of a completed assignment.
default RejectQualificationRequestResponse	rejectQualificationRequest(Consumer<RejectQualificationRequestRequest.Builder> rejectQualificationRequestRequest)	The RejectQualificationRequest operation rejects a user's request for a Qualification.
default RejectQualificationRequestResponse	rejectQualificationRequest(RejectQualificationRequestRequest rejectQualificationRequestRequest)	The RejectQualificationRequest operation rejects a user's request for a Qualification.
default SendBonusResponse	sendBonus(Consumer<SendBonusRequest.Builder> sendBonusRequest)	The SendBonus operation issues a payment of money from your account to a Worker.
default SendBonusResponse	sendBonus(SendBonusRequest sendBonusRequest)	The SendBonus operation issues a payment of money from your account to a Worker.
default SendTestEventNotificationResponse	sendTestEventNotification(Consumer<SendTestEventNotificationRequest.Builder> sendTestEventNotificationRequest)	The SendTestEventNotification operation causes Amazon Mechanical Turk to send a notification message as if a HIT event occurred, according to the provided notification specification.
default SendTestEventNotificationResponse	sendTestEventNotification(SendTestEventNotificationRequest sendTestEventNotificationRequest)	The SendTestEventNotification operation causes Amazon Mechanical Turk to send a notification message as if a HIT event occurred, according to the provided notification specification.
default MTurkServiceClientConfiguration	serviceClientConfiguration()	The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
static ServiceMetadata	serviceMetadata()
default UpdateExpirationForHitResponse	updateExpirationForHIT(Consumer<UpdateExpirationForHitRequest.Builder> updateExpirationForHitRequest)	The UpdateExpirationForHIT operation allows you update the expiration time of a HIT.
default UpdateExpirationForHitResponse	updateExpirationForHIT(UpdateExpirationForHitRequest updateExpirationForHitRequest)	The UpdateExpirationForHIT operation allows you update the expiration time of a HIT.
default UpdateHitReviewStatusResponse	updateHITReviewStatus(Consumer<UpdateHitReviewStatusRequest.Builder> updateHitReviewStatusRequest)	The UpdateHITReviewStatus operation updates the status of a HIT.
default UpdateHitReviewStatusResponse	updateHITReviewStatus(UpdateHitReviewStatusRequest updateHitReviewStatusRequest)	The UpdateHITReviewStatus operation updates the status of a HIT.
default UpdateHitTypeOfHitResponse	updateHITTypeOfHIT(Consumer<UpdateHitTypeOfHitRequest.Builder> updateHitTypeOfHitRequest)	The UpdateHITTypeOfHIT operation allows you to change the HITType properties of a HIT.
default UpdateHitTypeOfHitResponse	updateHITTypeOfHIT(UpdateHitTypeOfHitRequest updateHitTypeOfHitRequest)	The UpdateHITTypeOfHIT operation allows you to change the HITType properties of a HIT.
default UpdateNotificationSettingsResponse	updateNotificationSettings(Consumer<UpdateNotificationSettingsRequest.Builder> updateNotificationSettingsRequest)	The UpdateNotificationSettings operation creates, updates, disables or re-enables notifications for a HIT type.
default UpdateNotificationSettingsResponse	updateNotificationSettings(UpdateNotificationSettingsRequest updateNotificationSettingsRequest)	The UpdateNotificationSettings operation creates, updates, disables or re-enables notifications for a HIT type.
default UpdateQualificationTypeResponse	updateQualificationType(Consumer<UpdateQualificationTypeRequest.Builder> updateQualificationTypeRequest)	The UpdateQualificationType operation modifies the attributes of an existing Qualification type, which is represented by a QualificationType data structure.
default UpdateQualificationTypeResponse	updateQualificationType(UpdateQualificationTypeRequest updateQualificationTypeRequest)	The UpdateQualificationType operation modifies the attributes of an existing Qualification type, which is represented by a QualificationType data structure.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

close

Methods inherited from interface software.amazon.awssdk.core.SdkClient

serviceName

Field Details

SERVICE_NAME

static final String SERVICE_NAME

See Also:

• Constant Field Values

SERVICE_METADATA_ID

static final String SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

See Also:

• Constant Field Values

Method Details

acceptQualificationRequest

default AcceptQualificationRequestResponse acceptQualificationRequest(AcceptQualificationRequestRequest acceptQualificationRequestRequest)
                                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The AcceptQualificationRequest operation approves a Worker's request for a Qualification.

Only the owner of the Qualification type can grant a Qualification request for that type.

A successful request for the AcceptQualificationRequest operation returns with no errors and an empty body.

Parameters:

acceptQualificationRequestRequest -

Returns:

Result of the AcceptQualificationRequest operation returned by the service.

See Also:

• AWS API Documentation

acceptQualificationRequest

default AcceptQualificationRequestResponse acceptQualificationRequest(Consumer<AcceptQualificationRequestRequest.Builder> acceptQualificationRequestRequest)
                                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The AcceptQualificationRequest operation approves a Worker's request for a Qualification.

Only the owner of the Qualification type can grant a Qualification request for that type.

A successful request for the AcceptQualificationRequest operation returns with no errors and an empty body.

This is a convenience which creates an instance of the AcceptQualificationRequestRequest.Builder avoiding the need to create one manually via AcceptQualificationRequestRequest.builder()

Parameters:

acceptQualificationRequestRequest - A Consumer that will call methods on AcceptQualificationRequestRequest.Builder to create a request.

Returns:

Result of the AcceptQualificationRequest operation returned by the service.

See Also:

• AWS API Documentation

approveAssignment

default ApproveAssignmentResponse approveAssignment(ApproveAssignmentRequest approveAssignmentRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ApproveAssignment operation approves the results of a completed assignment.

Approving an assignment initiates two payments from the Requester's Amazon.com account

• The Worker who submitted the results is paid the reward specified in the HIT.

• Amazon Mechanical Turk fees are debited.

If the Requester's account does not have adequate funds for these payments, the call to ApproveAssignment returns an exception, and the approval is not processed. You can include an optional feedback message with the approval, which the Worker can see in the Status section of the web site.

You can also call this operation for assignments that were previous rejected and approve them by explicitly overriding the previous rejection. This only works on rejected assignments that were submitted within the previous 30 days and only if the assignment's related HIT has not been deleted.

Parameters:

approveAssignmentRequest -

Returns:

Result of the ApproveAssignment operation returned by the service.

See Also:

• AWS API Documentation

approveAssignment

default ApproveAssignmentResponse approveAssignment(Consumer<ApproveAssignmentRequest.Builder> approveAssignmentRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ApproveAssignment operation approves the results of a completed assignment.

Approving an assignment initiates two payments from the Requester's Amazon.com account

• The Worker who submitted the results is paid the reward specified in the HIT.

• Amazon Mechanical Turk fees are debited.

If the Requester's account does not have adequate funds for these payments, the call to ApproveAssignment returns an exception, and the approval is not processed. You can include an optional feedback message with the approval, which the Worker can see in the Status section of the web site.

You can also call this operation for assignments that were previous rejected and approve them by explicitly overriding the previous rejection. This only works on rejected assignments that were submitted within the previous 30 days and only if the assignment's related HIT has not been deleted.

This is a convenience which creates an instance of the ApproveAssignmentRequest.Builder avoiding the need to create one manually via ApproveAssignmentRequest.builder()

Parameters:

approveAssignmentRequest - A Consumer that will call methods on ApproveAssignmentRequest.Builder to create a request.

Returns:

Result of the ApproveAssignment operation returned by the service.

See Also:

• AWS API Documentation

associateQualificationWithWorker

default AssociateQualificationWithWorkerResponse associateQualificationWithWorker(AssociateQualificationWithWorkerRequest associateQualificationWithWorkerRequest)
                                                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The AssociateQualificationWithWorker operation gives a Worker a Qualification. AssociateQualificationWithWorker does not require that the Worker submit a Qualification request. It gives the Qualification directly to the Worker.

You can only assign a Qualification of a Qualification type that you created (using the CreateQualificationType operation).

Note: AssociateQualificationWithWorker does not affect any pending Qualification requests for the Qualification by the Worker. If you assign a Qualification to a Worker, then later grant a Qualification request made by the Worker, the granting of the request may modify the Qualification score. To resolve a pending Qualification request without affecting the Qualification the Worker already has, reject the request with the RejectQualificationRequest operation.

Parameters:

associateQualificationWithWorkerRequest -

Returns:

Result of the AssociateQualificationWithWorker operation returned by the service.

See Also:

• AWS API Documentation

associateQualificationWithWorker

default AssociateQualificationWithWorkerResponse associateQualificationWithWorker(Consumer<AssociateQualificationWithWorkerRequest.Builder> associateQualificationWithWorkerRequest)
                                                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The AssociateQualificationWithWorker operation gives a Worker a Qualification. AssociateQualificationWithWorker does not require that the Worker submit a Qualification request. It gives the Qualification directly to the Worker.

You can only assign a Qualification of a Qualification type that you created (using the CreateQualificationType operation).

Note: AssociateQualificationWithWorker does not affect any pending Qualification requests for the Qualification by the Worker. If you assign a Qualification to a Worker, then later grant a Qualification request made by the Worker, the granting of the request may modify the Qualification score. To resolve a pending Qualification request without affecting the Qualification the Worker already has, reject the request with the RejectQualificationRequest operation.

This is a convenience which creates an instance of the AssociateQualificationWithWorkerRequest.Builder avoiding the need to create one manually via AssociateQualificationWithWorkerRequest.builder()

Parameters:

associateQualificationWithWorkerRequest - A Consumer that will call methods on AssociateQualificationWithWorkerRequest.Builder to create a request.

Returns:

Result of the AssociateQualificationWithWorker operation returned by the service.

See Also:

• AWS API Documentation

createAdditionalAssignmentsForHIT

default CreateAdditionalAssignmentsForHitResponse createAdditionalAssignmentsForHIT(CreateAdditionalAssignmentsForHitRequest createAdditionalAssignmentsForHitRequest)
                                                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateAdditionalAssignmentsForHIT operation increases the maximum number of assignments of an existing HIT.

To extend the maximum number of assignments, specify the number of additional assignments.

• HITs created with fewer than 10 assignments cannot be extended to have 10 or more assignments. Attempting to add assignments in a way that brings the total number of assignments for a HIT from fewer than 10 assignments to 10 or more assignments will result in an AWS.MechanicalTurk.InvalidMaximumAssignmentsIncrease exception.

• HITs that were created before July 22, 2015 cannot be extended. Attempting to extend HITs that were created before July 22, 2015 will result in an AWS.MechanicalTurk.HITTooOldForExtension exception.

Parameters:

createAdditionalAssignmentsForHitRequest -

Returns:

Result of the CreateAdditionalAssignmentsForHIT operation returned by the service.

See Also:

• AWS API Documentation

createAdditionalAssignmentsForHIT

default CreateAdditionalAssignmentsForHitResponse createAdditionalAssignmentsForHIT(Consumer<CreateAdditionalAssignmentsForHitRequest.Builder> createAdditionalAssignmentsForHitRequest)
                                                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateAdditionalAssignmentsForHIT operation increases the maximum number of assignments of an existing HIT.

To extend the maximum number of assignments, specify the number of additional assignments.

• HITs created with fewer than 10 assignments cannot be extended to have 10 or more assignments. Attempting to add assignments in a way that brings the total number of assignments for a HIT from fewer than 10 assignments to 10 or more assignments will result in an AWS.MechanicalTurk.InvalidMaximumAssignmentsIncrease exception.

• HITs that were created before July 22, 2015 cannot be extended. Attempting to extend HITs that were created before July 22, 2015 will result in an AWS.MechanicalTurk.HITTooOldForExtension exception.

This is a convenience which creates an instance of the CreateAdditionalAssignmentsForHitRequest.Builder avoiding the need to create one manually via CreateAdditionalAssignmentsForHitRequest.builder()

Parameters:

createAdditionalAssignmentsForHitRequest - A Consumer that will call methods on CreateAdditionalAssignmentsForHitRequest.Builder to create a request.

Returns:

Result of the CreateAdditionalAssignmentsForHIT operation returned by the service.

See Also:

• AWS API Documentation

createHIT

default CreateHitResponse createHIT(CreateHitRequest createHitRequest)
                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateHIT operation creates a new Human Intelligence Task (HIT). The new HIT is made available for Workers to find and accept on the Amazon Mechanical Turk website.

This operation allows you to specify a new HIT by passing in values for the properties of the HIT, such as its title, reward amount and number of assignments. When you pass these values to CreateHIT, a new HIT is created for you, with a new HITTypeID. The HITTypeID can be used to create additional HITs in the future without needing to specify common parameters such as the title, description and reward amount each time.

An alternative way to create HITs is to first generate a HITTypeID using the CreateHITType operation and then call the CreateHITWithHITType operation. This is the recommended best practice for Requesters who are creating large numbers of HITs.

CreateHIT also supports several ways to provide question data: by providing a value for the Question parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId and associated HitLayoutParameters.

If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.

Parameters:

createHitRequest -

Returns:

Result of the CreateHIT operation returned by the service.

See Also:

• AWS API Documentation

createHIT

default CreateHitResponse createHIT(Consumer<CreateHitRequest.Builder> createHitRequest)
                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateHIT operation creates a new Human Intelligence Task (HIT). The new HIT is made available for Workers to find and accept on the Amazon Mechanical Turk website.

This operation allows you to specify a new HIT by passing in values for the properties of the HIT, such as its title, reward amount and number of assignments. When you pass these values to CreateHIT, a new HIT is created for you, with a new HITTypeID. The HITTypeID can be used to create additional HITs in the future without needing to specify common parameters such as the title, description and reward amount each time.

An alternative way to create HITs is to first generate a HITTypeID using the CreateHITType operation and then call the CreateHITWithHITType operation. This is the recommended best practice for Requesters who are creating large numbers of HITs.

CreateHIT also supports several ways to provide question data: by providing a value for the Question parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId and associated HitLayoutParameters.

If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.

This is a convenience which creates an instance of the CreateHitRequest.Builder avoiding the need to create one manually via CreateHitRequest.builder()

Parameters:

createHitRequest - A Consumer that will call methods on CreateHitRequest.Builder to create a request.

Returns:

Result of the CreateHIT operation returned by the service.

See Also:

• AWS API Documentation

createHITType

default CreateHitTypeResponse createHITType(CreateHitTypeRequest createHitTypeRequest)
                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateHITType operation creates a new HIT type. This operation allows you to define a standard set of HIT properties to use when creating HITs. If you register a HIT type with values that match an existing HIT type, the HIT type ID of the existing type will be returned.

Parameters:

createHitTypeRequest -

Returns:

Result of the CreateHITType operation returned by the service.

See Also:

• AWS API Documentation

createHITType

default CreateHitTypeResponse createHITType(Consumer<CreateHitTypeRequest.Builder> createHitTypeRequest)
                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateHITType operation creates a new HIT type. This operation allows you to define a standard set of HIT properties to use when creating HITs. If you register a HIT type with values that match an existing HIT type, the HIT type ID of the existing type will be returned.

This is a convenience which creates an instance of the CreateHitTypeRequest.Builder avoiding the need to create one manually via CreateHitTypeRequest.builder()

Parameters:

createHitTypeRequest - A Consumer that will call methods on CreateHitTypeRequest.Builder to create a request.

Returns:

Result of the CreateHITType operation returned by the service.

See Also:

• AWS API Documentation

createHITWithHITType

default CreateHitWithHitTypeResponse createHITWithHITType(CreateHitWithHitTypeRequest createHitWithHitTypeRequest)
                                                   throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateHITWithHITType operation creates a new Human Intelligence Task (HIT) using an existing HITTypeID generated by the CreateHITType operation.

This is an alternative way to create HITs from the CreateHIT operation. This is the recommended best practice for Requesters who are creating large numbers of HITs.

CreateHITWithHITType also supports several ways to provide question data: by providing a value for the Question parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId and associated HitLayoutParameters.

If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.

Parameters:

createHitWithHitTypeRequest -

Returns:

Result of the CreateHITWithHITType operation returned by the service.

See Also:

• AWS API Documentation

createHITWithHITType

default CreateHitWithHitTypeResponse createHITWithHITType(Consumer<CreateHitWithHitTypeRequest.Builder> createHitWithHitTypeRequest)
                                                   throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateHITWithHITType operation creates a new Human Intelligence Task (HIT) using an existing HITTypeID generated by the CreateHITType operation.

This is an alternative way to create HITs from the CreateHIT operation. This is the recommended best practice for Requesters who are creating large numbers of HITs.

CreateHITWithHITType also supports several ways to provide question data: by providing a value for the Question parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId and associated HitLayoutParameters.

If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.

This is a convenience which creates an instance of the CreateHitWithHitTypeRequest.Builder avoiding the need to create one manually via CreateHitWithHitTypeRequest.builder()

Parameters:

createHitWithHitTypeRequest - A Consumer that will call methods on CreateHitWithHitTypeRequest.Builder to create a request.

Returns:

Result of the CreateHITWithHITType operation returned by the service.

See Also:

• AWS API Documentation

createQualificationType

default CreateQualificationTypeResponse createQualificationType(CreateQualificationTypeRequest createQualificationTypeRequest)
                                                         throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateQualificationType operation creates a new Qualification type, which is represented by a QualificationType data structure.

Parameters:

createQualificationTypeRequest -

Returns:

Result of the CreateQualificationType operation returned by the service.

See Also:

• AWS API Documentation

createQualificationType

default CreateQualificationTypeResponse createQualificationType(Consumer<CreateQualificationTypeRequest.Builder> createQualificationTypeRequest)
                                                         throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateQualificationType operation creates a new Qualification type, which is represented by a QualificationType data structure.

This is a convenience which creates an instance of the CreateQualificationTypeRequest.Builder avoiding the need to create one manually via CreateQualificationTypeRequest.builder()

Parameters:

createQualificationTypeRequest - A Consumer that will call methods on CreateQualificationTypeRequest.Builder to create a request.

Returns:

Result of the CreateQualificationType operation returned by the service.

See Also:

• AWS API Documentation

createWorkerBlock

default CreateWorkerBlockResponse createWorkerBlock(CreateWorkerBlockRequest createWorkerBlockRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateWorkerBlock operation allows you to prevent a Worker from working on your HITs. For example, you can block a Worker who is producing poor quality work. You can block up to 100,000 Workers.

Parameters:

createWorkerBlockRequest -

Returns:

Result of the CreateWorkerBlock operation returned by the service.

See Also:

• AWS API Documentation

createWorkerBlock

default CreateWorkerBlockResponse createWorkerBlock(Consumer<CreateWorkerBlockRequest.Builder> createWorkerBlockRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The CreateWorkerBlock operation allows you to prevent a Worker from working on your HITs. For example, you can block a Worker who is producing poor quality work. You can block up to 100,000 Workers.

This is a convenience which creates an instance of the CreateWorkerBlockRequest.Builder avoiding the need to create one manually via CreateWorkerBlockRequest.builder()

Parameters:

createWorkerBlockRequest - A Consumer that will call methods on CreateWorkerBlockRequest.Builder to create a request.

Returns:

Result of the CreateWorkerBlock operation returned by the service.

See Also:

• AWS API Documentation

deleteHIT

default DeleteHitResponse deleteHIT(DeleteHitRequest deleteHitRequest)
                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DeleteHIT operation is used to delete HIT that is no longer needed. Only the Requester who created the HIT can delete it.

You can only dispose of HITs that are in the Reviewable state, with all of their submitted assignments already either approved or rejected. If you call the DeleteHIT operation on a HIT that is not in the Reviewable state (for example, that has not expired, or still has active assignments), or on a HIT that is Reviewable but without all of its submitted assignments already approved or rejected, the service will return an error.

• HITs are automatically disposed of after 120 days.

• After you dispose of a HIT, you can no longer approve the HIT's rejected assignments.

• Disposed HITs are not returned in results for the ListHITs operation.

• Disposing HITs can improve the performance of operations such as ListReviewableHITs and ListHITs.

Parameters:

deleteHitRequest -

Returns:

Result of the DeleteHIT operation returned by the service.

See Also:

• AWS API Documentation

deleteHIT

default DeleteHitResponse deleteHIT(Consumer<DeleteHitRequest.Builder> deleteHitRequest)
                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DeleteHIT operation is used to delete HIT that is no longer needed. Only the Requester who created the HIT can delete it.

You can only dispose of HITs that are in the Reviewable state, with all of their submitted assignments already either approved or rejected. If you call the DeleteHIT operation on a HIT that is not in the Reviewable state (for example, that has not expired, or still has active assignments), or on a HIT that is Reviewable but without all of its submitted assignments already approved or rejected, the service will return an error.

• HITs are automatically disposed of after 120 days.

• After you dispose of a HIT, you can no longer approve the HIT's rejected assignments.

• Disposed HITs are not returned in results for the ListHITs operation.

• Disposing HITs can improve the performance of operations such as ListReviewableHITs and ListHITs.

This is a convenience which creates an instance of the DeleteHitRequest.Builder avoiding the need to create one manually via DeleteHitRequest.builder()

Parameters:

deleteHitRequest - A Consumer that will call methods on DeleteHitRequest.Builder to create a request.

Returns:

Result of the DeleteHIT operation returned by the service.

See Also:

• AWS API Documentation

deleteQualificationType

default DeleteQualificationTypeResponse deleteQualificationType(DeleteQualificationTypeRequest deleteQualificationTypeRequest)
                                                         throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DeleteQualificationType deletes a Qualification type and deletes any HIT types that are associated with the Qualification type.

This operation does not revoke Qualifications already assigned to Workers because the Qualifications might be needed for active HITs. If there are any pending requests for the Qualification type, Amazon Mechanical Turk rejects those requests. After you delete a Qualification type, you can no longer use it to create HITs or HIT types.

DeleteQualificationType must wait for all the HITs that use the deleted Qualification type to be deleted before completing. It may take up to 48 hours before DeleteQualificationType completes and the unique name of the Qualification type is available for reuse with CreateQualificationType.

Parameters:

deleteQualificationTypeRequest -

Returns:

Result of the DeleteQualificationType operation returned by the service.

See Also:

• AWS API Documentation

deleteQualificationType

default DeleteQualificationTypeResponse deleteQualificationType(Consumer<DeleteQualificationTypeRequest.Builder> deleteQualificationTypeRequest)
                                                         throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DeleteQualificationType deletes a Qualification type and deletes any HIT types that are associated with the Qualification type.

This operation does not revoke Qualifications already assigned to Workers because the Qualifications might be needed for active HITs. If there are any pending requests for the Qualification type, Amazon Mechanical Turk rejects those requests. After you delete a Qualification type, you can no longer use it to create HITs or HIT types.

DeleteQualificationType must wait for all the HITs that use the deleted Qualification type to be deleted before completing. It may take up to 48 hours before DeleteQualificationType completes and the unique name of the Qualification type is available for reuse with CreateQualificationType.

This is a convenience which creates an instance of the DeleteQualificationTypeRequest.Builder avoiding the need to create one manually via DeleteQualificationTypeRequest.builder()

Parameters:

deleteQualificationTypeRequest - A Consumer that will call methods on DeleteQualificationTypeRequest.Builder to create a request.

Returns:

Result of the DeleteQualificationType operation returned by the service.

See Also:

• AWS API Documentation

deleteWorkerBlock

default DeleteWorkerBlockResponse deleteWorkerBlock(DeleteWorkerBlockRequest deleteWorkerBlockRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DeleteWorkerBlock operation allows you to reinstate a blocked Worker to work on your HITs. This operation reverses the effects of the CreateWorkerBlock operation. You need the Worker ID to use this operation. If the Worker ID is missing or invalid, this operation fails and returns the message “WorkerId is invalid.” If the specified Worker is not blocked, this operation returns successfully.

Parameters:

deleteWorkerBlockRequest -

Returns:

Result of the DeleteWorkerBlock operation returned by the service.

See Also:

• AWS API Documentation

deleteWorkerBlock

default DeleteWorkerBlockResponse deleteWorkerBlock(Consumer<DeleteWorkerBlockRequest.Builder> deleteWorkerBlockRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DeleteWorkerBlock operation allows you to reinstate a blocked Worker to work on your HITs. This operation reverses the effects of the CreateWorkerBlock operation. You need the Worker ID to use this operation. If the Worker ID is missing or invalid, this operation fails and returns the message “WorkerId is invalid.” If the specified Worker is not blocked, this operation returns successfully.

This is a convenience which creates an instance of the DeleteWorkerBlockRequest.Builder avoiding the need to create one manually via DeleteWorkerBlockRequest.builder()

Parameters:

deleteWorkerBlockRequest - A Consumer that will call methods on DeleteWorkerBlockRequest.Builder to create a request.

Returns:

Result of the DeleteWorkerBlock operation returned by the service.

See Also:

• AWS API Documentation

disassociateQualificationFromWorker

default DisassociateQualificationFromWorkerResponse disassociateQualificationFromWorker(DisassociateQualificationFromWorkerRequest disassociateQualificationFromWorkerRequest)
                                                                                 throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DisassociateQualificationFromWorker revokes a previously granted Qualification from a user.

You can provide a text message explaining why the Qualification was revoked. The user who had the Qualification can see this message.

Parameters:

disassociateQualificationFromWorkerRequest -

Returns:

Result of the DisassociateQualificationFromWorker operation returned by the service.

See Also:

• AWS API Documentation

disassociateQualificationFromWorker

default DisassociateQualificationFromWorkerResponse disassociateQualificationFromWorker(Consumer<DisassociateQualificationFromWorkerRequest.Builder> disassociateQualificationFromWorkerRequest)
                                                                                 throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The DisassociateQualificationFromWorker revokes a previously granted Qualification from a user.

You can provide a text message explaining why the Qualification was revoked. The user who had the Qualification can see this message.

This is a convenience which creates an instance of the DisassociateQualificationFromWorkerRequest.Builder avoiding the need to create one manually via DisassociateQualificationFromWorkerRequest.builder()

Parameters:

disassociateQualificationFromWorkerRequest - A Consumer that will call methods on DisassociateQualificationFromWorkerRequest.Builder to create a request.

Returns:

Result of the DisassociateQualificationFromWorker operation returned by the service.

See Also:

• AWS API Documentation

getAccountBalance

default GetAccountBalanceResponse getAccountBalance(GetAccountBalanceRequest getAccountBalanceRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetAccountBalance operation retrieves the Prepaid HITs balance in your Amazon Mechanical Turk account if you are a Prepaid Requester. Alternatively, this operation will retrieve the remaining available AWS Billing usage if you have enabled AWS Billing. Note: If you have enabled AWS Billing and still have a remaining Prepaid HITs balance, this balance can be viewed on the My Account page in the Requester console.

Parameters:

getAccountBalanceRequest -

Returns:

Result of the GetAccountBalance operation returned by the service.

See Also:

• AWS API Documentation

getAccountBalance

default GetAccountBalanceResponse getAccountBalance(Consumer<GetAccountBalanceRequest.Builder> getAccountBalanceRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetAccountBalance operation retrieves the Prepaid HITs balance in your Amazon Mechanical Turk account if you are a Prepaid Requester. Alternatively, this operation will retrieve the remaining available AWS Billing usage if you have enabled AWS Billing. Note: If you have enabled AWS Billing and still have a remaining Prepaid HITs balance, this balance can be viewed on the My Account page in the Requester console.

This is a convenience which creates an instance of the GetAccountBalanceRequest.Builder avoiding the need to create one manually via GetAccountBalanceRequest.builder()

Parameters:

getAccountBalanceRequest - A Consumer that will call methods on GetAccountBalanceRequest.Builder to create a request.

Returns:

Result of the GetAccountBalance operation returned by the service.

See Also:

• AWS API Documentation

getAccountBalance

default GetAccountBalanceResponse getAccountBalance()
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetAccountBalance operation retrieves the Prepaid HITs balance in your Amazon Mechanical Turk account if you are a Prepaid Requester. Alternatively, this operation will retrieve the remaining available AWS Billing usage if you have enabled AWS Billing. Note: If you have enabled AWS Billing and still have a remaining Prepaid HITs balance, this balance can be viewed on the My Account page in the Requester console.

Returns:

Result of the GetAccountBalance operation returned by the service.

See Also:

• getAccountBalance(GetAccountBalanceRequest)
• AWS API Documentation

getAssignment

default GetAssignmentResponse getAssignment(GetAssignmentRequest getAssignmentRequest)
                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetAssignment operation retrieves the details of the specified Assignment.

Parameters:

getAssignmentRequest -

Returns:

Result of the GetAssignment operation returned by the service.

See Also:

• AWS API Documentation

getAssignment

default GetAssignmentResponse getAssignment(Consumer<GetAssignmentRequest.Builder> getAssignmentRequest)
                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetAssignment operation retrieves the details of the specified Assignment.

This is a convenience which creates an instance of the GetAssignmentRequest.Builder avoiding the need to create one manually via GetAssignmentRequest.builder()

Parameters:

getAssignmentRequest - A Consumer that will call methods on GetAssignmentRequest.Builder to create a request.

Returns:

Result of the GetAssignment operation returned by the service.

See Also:

• AWS API Documentation

getFileUploadURL

default GetFileUploadUrlResponse getFileUploadURL(GetFileUploadUrlRequest getFileUploadUrlRequest)
                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetFileUploadURL operation generates and returns a temporary URL. You use the temporary URL to retrieve a file uploaded by a Worker as an answer to a FileUploadAnswer question for a HIT. The temporary URL is generated the instant the GetFileUploadURL operation is called, and is valid for 60 seconds. You can get a temporary file upload URL any time until the HIT is disposed. After the HIT is disposed, any uploaded files are deleted, and cannot be retrieved. Pending Deprecation on December 12, 2017. The Answer Specification structure will no longer support the FileUploadAnswer element to be used for the QuestionForm data structure. Instead, we recommend that Requesters who want to create HITs asking Workers to upload files to use Amazon S3.

Parameters:

getFileUploadUrlRequest -

Returns:

Result of the GetFileUploadURL operation returned by the service.

See Also:

• AWS API Documentation

getFileUploadURL

default GetFileUploadUrlResponse getFileUploadURL(Consumer<GetFileUploadUrlRequest.Builder> getFileUploadUrlRequest)
                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetFileUploadURL operation generates and returns a temporary URL. You use the temporary URL to retrieve a file uploaded by a Worker as an answer to a FileUploadAnswer question for a HIT. The temporary URL is generated the instant the GetFileUploadURL operation is called, and is valid for 60 seconds. You can get a temporary file upload URL any time until the HIT is disposed. After the HIT is disposed, any uploaded files are deleted, and cannot be retrieved. Pending Deprecation on December 12, 2017. The Answer Specification structure will no longer support the FileUploadAnswer element to be used for the QuestionForm data structure. Instead, we recommend that Requesters who want to create HITs asking Workers to upload files to use Amazon S3.

This is a convenience which creates an instance of the GetFileUploadUrlRequest.Builder avoiding the need to create one manually via GetFileUploadUrlRequest.builder()

Parameters:

getFileUploadUrlRequest - A Consumer that will call methods on GetFileUploadUrlRequest.Builder to create a request.

Returns:

Result of the GetFileUploadURL operation returned by the service.

See Also:

• AWS API Documentation

getHIT

default GetHitResponse getHIT(GetHitRequest getHitRequest)
                       throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetHIT operation retrieves the details of the specified HIT.

Parameters:

getHitRequest -

Returns:

Result of the GetHIT operation returned by the service.

See Also:

• AWS API Documentation

getHIT

default GetHitResponse getHIT(Consumer<GetHitRequest.Builder> getHitRequest)
                       throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetHIT operation retrieves the details of the specified HIT.

This is a convenience which creates an instance of the GetHitRequest.Builder avoiding the need to create one manually via GetHitRequest.builder()

Parameters:

getHitRequest - A Consumer that will call methods on GetHitRequest.Builder to create a request.

Returns:

Result of the GetHIT operation returned by the service.

See Also:

• AWS API Documentation

getQualificationScore

default GetQualificationScoreResponse getQualificationScore(GetQualificationScoreRequest getQualificationScoreRequest)
                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetQualificationScore operation returns the value of a Worker's Qualification for a given Qualification type.

To get a Worker's Qualification, you must know the Worker's ID. The Worker's ID is included in the assignment data returned by the ListAssignmentsForHIT operation.

Only the owner of a Qualification type can query the value of a Worker's Qualification of that type.

Parameters:

getQualificationScoreRequest -

Returns:

Result of the GetQualificationScore operation returned by the service.

See Also:

• AWS API Documentation

getQualificationScore

default GetQualificationScoreResponse getQualificationScore(Consumer<GetQualificationScoreRequest.Builder> getQualificationScoreRequest)
                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetQualificationScore operation returns the value of a Worker's Qualification for a given Qualification type.

To get a Worker's Qualification, you must know the Worker's ID. The Worker's ID is included in the assignment data returned by the ListAssignmentsForHIT operation.

Only the owner of a Qualification type can query the value of a Worker's Qualification of that type.

This is a convenience which creates an instance of the GetQualificationScoreRequest.Builder avoiding the need to create one manually via GetQualificationScoreRequest.builder()

Parameters:

getQualificationScoreRequest - A Consumer that will call methods on GetQualificationScoreRequest.Builder to create a request.

Returns:

Result of the GetQualificationScore operation returned by the service.

See Also:

• AWS API Documentation

getQualificationType

default GetQualificationTypeResponse getQualificationType(GetQualificationTypeRequest getQualificationTypeRequest)
                                                   throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetQualificationTypeoperation retrieves information about a Qualification type using its ID.

Parameters:

getQualificationTypeRequest -

Returns:

Result of the GetQualificationType operation returned by the service.

See Also:

• AWS API Documentation

getQualificationType

default GetQualificationTypeResponse getQualificationType(Consumer<GetQualificationTypeRequest.Builder> getQualificationTypeRequest)
                                                   throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The GetQualificationTypeoperation retrieves information about a Qualification type using its ID.

This is a convenience which creates an instance of the GetQualificationTypeRequest.Builder avoiding the need to create one manually via GetQualificationTypeRequest.builder()

Parameters:

getQualificationTypeRequest - A Consumer that will call methods on GetQualificationTypeRequest.Builder to create a request.

Returns:

Result of the GetQualificationType operation returned by the service.

See Also:

• AWS API Documentation

listAssignmentsForHIT

default ListAssignmentsForHitResponse listAssignmentsForHIT(ListAssignmentsForHitRequest listAssignmentsForHitRequest)
                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListAssignmentsForHIT operation retrieves completed assignments for a HIT. You can use this operation to retrieve the results for a HIT.

You can get assignments for a HIT at any time, even if the HIT is not yet Reviewable. If a HIT requested multiple assignments, and has received some results but has not yet become Reviewable, you can still retrieve the partial results with this operation.

Use the AssignmentStatus parameter to control which set of assignments for a HIT are returned. The ListAssignmentsForHIT operation can return submitted assignments awaiting approval, or it can return assignments that have already been approved or rejected. You can set AssignmentStatus=Approved,Rejected to get assignments that have already been approved and rejected together in one result set.

Only the Requester who created the HIT can retrieve the assignments for that HIT.

Results are sorted and divided into numbered pages and the operation returns a single page of results. You can use the parameters of the operation to control sorting and pagination.

Parameters:

listAssignmentsForHitRequest -

Returns:

Result of the ListAssignmentsForHIT operation returned by the service.

See Also:

• AWS API Documentation

listAssignmentsForHIT

default ListAssignmentsForHitResponse listAssignmentsForHIT(Consumer<ListAssignmentsForHitRequest.Builder> listAssignmentsForHitRequest)
                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListAssignmentsForHIT operation retrieves completed assignments for a HIT. You can use this operation to retrieve the results for a HIT.

You can get assignments for a HIT at any time, even if the HIT is not yet Reviewable. If a HIT requested multiple assignments, and has received some results but has not yet become Reviewable, you can still retrieve the partial results with this operation.

Use the AssignmentStatus parameter to control which set of assignments for a HIT are returned. The ListAssignmentsForHIT operation can return submitted assignments awaiting approval, or it can return assignments that have already been approved or rejected. You can set AssignmentStatus=Approved,Rejected to get assignments that have already been approved and rejected together in one result set.

Only the Requester who created the HIT can retrieve the assignments for that HIT.

Results are sorted and divided into numbered pages and the operation returns a single page of results. You can use the parameters of the operation to control sorting and pagination.

This is a convenience which creates an instance of the ListAssignmentsForHitRequest.Builder avoiding the need to create one manually via ListAssignmentsForHitRequest.builder()

Parameters:

listAssignmentsForHitRequest - A Consumer that will call methods on ListAssignmentsForHitRequest.Builder to create a request.

Returns:

Result of the ListAssignmentsForHIT operation returned by the service.

See Also:

• AWS API Documentation

listAssignmentsForHITPaginator

default ListAssignmentsForHITIterable listAssignmentsForHITPaginator(ListAssignmentsForHitRequest listAssignmentsForHitRequest)
                                                              throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listAssignmentsForHIT(software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListAssignmentsForHITIterable responses = client.listAssignmentsForHITPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListAssignmentsForHITIterable responses = client
             .listAssignmentsForHITPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListAssignmentsForHITIterable responses = client.listAssignmentsForHITPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAssignmentsForHIT(software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitRequest) operation.

Parameters:

listAssignmentsForHitRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAssignmentsForHITPaginator

default ListAssignmentsForHITIterable listAssignmentsForHITPaginator(Consumer<ListAssignmentsForHitRequest.Builder> listAssignmentsForHitRequest)
                                                              throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listAssignmentsForHIT(software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListAssignmentsForHITIterable responses = client.listAssignmentsForHITPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListAssignmentsForHITIterable responses = client
             .listAssignmentsForHITPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListAssignmentsForHITIterable responses = client.listAssignmentsForHITPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAssignmentsForHIT(software.amazon.awssdk.services.mturk.model.ListAssignmentsForHitRequest) operation.

This is a convenience which creates an instance of the ListAssignmentsForHitRequest.Builder avoiding the need to create one manually via ListAssignmentsForHitRequest.builder()

Parameters:

listAssignmentsForHitRequest - A Consumer that will call methods on ListAssignmentsForHitRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listBonusPayments

default ListBonusPaymentsResponse listBonusPayments(ListBonusPaymentsRequest listBonusPaymentsRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListBonusPayments operation retrieves the amounts of bonuses you have paid to Workers for a given HIT or assignment.

Parameters:

listBonusPaymentsRequest -

Returns:

Result of the ListBonusPayments operation returned by the service.

See Also:

• AWS API Documentation

listBonusPayments

default ListBonusPaymentsResponse listBonusPayments(Consumer<ListBonusPaymentsRequest.Builder> listBonusPaymentsRequest)
                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListBonusPayments operation retrieves the amounts of bonuses you have paid to Workers for a given HIT or assignment.

This is a convenience which creates an instance of the ListBonusPaymentsRequest.Builder avoiding the need to create one manually via ListBonusPaymentsRequest.builder()

Parameters:

listBonusPaymentsRequest - A Consumer that will call methods on ListBonusPaymentsRequest.Builder to create a request.

Returns:

Result of the ListBonusPayments operation returned by the service.

See Also:

• AWS API Documentation

listBonusPaymentsPaginator

default ListBonusPaymentsIterable listBonusPaymentsPaginator(ListBonusPaymentsRequest listBonusPaymentsRequest)
                                                      throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listBonusPayments(software.amazon.awssdk.services.mturk.model.ListBonusPaymentsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListBonusPaymentsIterable responses = client.listBonusPaymentsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListBonusPaymentsIterable responses = client
             .listBonusPaymentsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListBonusPaymentsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListBonusPaymentsIterable responses = client.listBonusPaymentsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listBonusPayments(software.amazon.awssdk.services.mturk.model.ListBonusPaymentsRequest) operation.

Parameters:

listBonusPaymentsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listBonusPaymentsPaginator

default ListBonusPaymentsIterable listBonusPaymentsPaginator(Consumer<ListBonusPaymentsRequest.Builder> listBonusPaymentsRequest)
                                                      throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listBonusPayments(software.amazon.awssdk.services.mturk.model.ListBonusPaymentsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListBonusPaymentsIterable responses = client.listBonusPaymentsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListBonusPaymentsIterable responses = client
             .listBonusPaymentsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListBonusPaymentsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListBonusPaymentsIterable responses = client.listBonusPaymentsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listBonusPayments(software.amazon.awssdk.services.mturk.model.ListBonusPaymentsRequest) operation.

This is a convenience which creates an instance of the ListBonusPaymentsRequest.Builder avoiding the need to create one manually via ListBonusPaymentsRequest.builder()

Parameters:

listBonusPaymentsRequest - A Consumer that will call methods on ListBonusPaymentsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listHITs

default ListHiTsResponse listHITs(ListHiTsRequest listHiTsRequest)
                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListHITs operation returns all of a Requester's HITs. The operation returns HITs of any status, except for HITs that have been deleted of with the DeleteHIT operation or that have been auto-deleted.

Parameters:

listHiTsRequest -

Returns:

Result of the ListHITs operation returned by the service.

See Also:

• AWS API Documentation

listHITs

default ListHiTsResponse listHITs(Consumer<ListHiTsRequest.Builder> listHiTsRequest)
                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListHITs operation returns all of a Requester's HITs. The operation returns HITs of any status, except for HITs that have been deleted of with the DeleteHIT operation or that have been auto-deleted.

This is a convenience which creates an instance of the ListHiTsRequest.Builder avoiding the need to create one manually via ListHiTsRequest.builder()

Parameters:

listHiTsRequest - A Consumer that will call methods on ListHiTsRequest.Builder to create a request.

Returns:

Result of the ListHITs operation returned by the service.

See Also:

• AWS API Documentation

listHITs

default ListHiTsResponse listHITs()
                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListHITs operation returns all of a Requester's HITs. The operation returns HITs of any status, except for HITs that have been deleted of with the DeleteHIT operation or that have been auto-deleted.

Returns:

Result of the ListHITs operation returned by the service.

See Also:

• listHITs(ListHiTsRequest)
• AWS API Documentation

listHITsPaginator

default ListHITsIterable listHITsPaginator()
                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListHiTsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• listHITsPaginator(ListHiTsRequest)
• AWS API Documentation

listHITsPaginator

default ListHITsIterable listHITsPaginator(ListHiTsRequest listHiTsRequest)
                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListHiTsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation.

Parameters:

listHiTsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listHITsPaginator

default ListHITsIterable listHITsPaginator(Consumer<ListHiTsRequest.Builder> listHiTsRequest)
                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListHiTsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsIterable responses = client.listHITsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listHITs(software.amazon.awssdk.services.mturk.model.ListHiTsRequest) operation.

This is a convenience which creates an instance of the ListHiTsRequest.Builder avoiding the need to create one manually via ListHiTsRequest.builder()

Parameters:

listHiTsRequest - A Consumer that will call methods on ListHiTsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listHITsForQualificationType

default ListHiTsForQualificationTypeResponse listHITsForQualificationType(ListHiTsForQualificationTypeRequest listHiTsForQualificationTypeRequest)
                                                                   throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListHITsForQualificationType operation returns the HITs that use the given Qualification type for a Qualification requirement. The operation returns HITs of any status, except for HITs that have been deleted with the DeleteHIT operation or that have been auto-deleted.

Parameters:

listHiTsForQualificationTypeRequest -

Returns:

Result of the ListHITsForQualificationType operation returned by the service.

See Also:

• AWS API Documentation

listHITsForQualificationType

default ListHiTsForQualificationTypeResponse listHITsForQualificationType(Consumer<ListHiTsForQualificationTypeRequest.Builder> listHiTsForQualificationTypeRequest)
                                                                   throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListHITsForQualificationType operation returns the HITs that use the given Qualification type for a Qualification requirement. The operation returns HITs of any status, except for HITs that have been deleted with the DeleteHIT operation or that have been auto-deleted.

This is a convenience which creates an instance of the ListHiTsForQualificationTypeRequest.Builder avoiding the need to create one manually via ListHiTsForQualificationTypeRequest.builder()

Parameters:

listHiTsForQualificationTypeRequest - A Consumer that will call methods on ListHiTsForQualificationTypeRequest.Builder to create a request.

Returns:

Result of the ListHITsForQualificationType operation returned by the service.

See Also:

• AWS API Documentation

listHITsForQualificationTypePaginator

default ListHITsForQualificationTypeIterable listHITsForQualificationTypePaginator(ListHiTsForQualificationTypeRequest listHiTsForQualificationTypeRequest)
                                                                            throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listHITsForQualificationType(software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsForQualificationTypeIterable responses = client.listHITsForQualificationTypePaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListHITsForQualificationTypeIterable responses = client
             .listHITsForQualificationTypePaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsForQualificationTypeIterable responses = client.listHITsForQualificationTypePaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listHITsForQualificationType(software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeRequest) operation.

Parameters:

listHiTsForQualificationTypeRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listHITsForQualificationTypePaginator

default ListHITsForQualificationTypeIterable listHITsForQualificationTypePaginator(Consumer<ListHiTsForQualificationTypeRequest.Builder> listHiTsForQualificationTypeRequest)
                                                                            throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listHITsForQualificationType(software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsForQualificationTypeIterable responses = client.listHITsForQualificationTypePaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListHITsForQualificationTypeIterable responses = client
             .listHITsForQualificationTypePaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListHITsForQualificationTypeIterable responses = client.listHITsForQualificationTypePaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listHITsForQualificationType(software.amazon.awssdk.services.mturk.model.ListHiTsForQualificationTypeRequest) operation.

This is a convenience which creates an instance of the ListHiTsForQualificationTypeRequest.Builder avoiding the need to create one manually via ListHiTsForQualificationTypeRequest.builder()

Parameters:

listHiTsForQualificationTypeRequest - A Consumer that will call methods on ListHiTsForQualificationTypeRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listQualificationRequests

default ListQualificationRequestsResponse listQualificationRequests(ListQualificationRequestsRequest listQualificationRequestsRequest)
                                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListQualificationRequests operation retrieves requests for Qualifications of a particular Qualification type. The owner of the Qualification type calls this operation to poll for pending requests, and accepts them using the AcceptQualification operation.

Parameters:

listQualificationRequestsRequest -

Returns:

Result of the ListQualificationRequests operation returned by the service.

See Also:

• AWS API Documentation

listQualificationRequests

default ListQualificationRequestsResponse listQualificationRequests(Consumer<ListQualificationRequestsRequest.Builder> listQualificationRequestsRequest)
                                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListQualificationRequests operation retrieves requests for Qualifications of a particular Qualification type. The owner of the Qualification type calls this operation to poll for pending requests, and accepts them using the AcceptQualification operation.

This is a convenience which creates an instance of the ListQualificationRequestsRequest.Builder avoiding the need to create one manually via ListQualificationRequestsRequest.builder()

Parameters:

listQualificationRequestsRequest - A Consumer that will call methods on ListQualificationRequestsRequest.Builder to create a request.

Returns:

Result of the ListQualificationRequests operation returned by the service.

See Also:

• AWS API Documentation

listQualificationRequests

default ListQualificationRequestsResponse listQualificationRequests()
                                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListQualificationRequests operation retrieves requests for Qualifications of a particular Qualification type. The owner of the Qualification type calls this operation to poll for pending requests, and accepts them using the AcceptQualification operation.

Returns:

Result of the ListQualificationRequests operation returned by the service.

See Also:

• listQualificationRequests(ListQualificationRequestsRequest)
• AWS API Documentation

listQualificationRequestsPaginator

default ListQualificationRequestsIterable listQualificationRequestsPaginator()
                                                                      throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client.listQualificationRequestsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client
             .listQualificationRequestsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListQualificationRequestsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client.listQualificationRequestsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• listQualificationRequestsPaginator(ListQualificationRequestsRequest)
• AWS API Documentation

listQualificationRequestsPaginator

default ListQualificationRequestsIterable listQualificationRequestsPaginator(ListQualificationRequestsRequest listQualificationRequestsRequest)
                                                                      throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client.listQualificationRequestsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client
             .listQualificationRequestsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListQualificationRequestsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client.listQualificationRequestsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation.

Parameters:

listQualificationRequestsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listQualificationRequestsPaginator

default ListQualificationRequestsIterable listQualificationRequestsPaginator(Consumer<ListQualificationRequestsRequest.Builder> listQualificationRequestsRequest)
                                                                      throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client.listQualificationRequestsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client
             .listQualificationRequestsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListQualificationRequestsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationRequestsIterable responses = client.listQualificationRequestsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listQualificationRequests(software.amazon.awssdk.services.mturk.model.ListQualificationRequestsRequest) operation.

This is a convenience which creates an instance of the ListQualificationRequestsRequest.Builder avoiding the need to create one manually via ListQualificationRequestsRequest.builder()

Parameters:

listQualificationRequestsRequest - A Consumer that will call methods on ListQualificationRequestsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listQualificationTypes

default ListQualificationTypesResponse listQualificationTypes(ListQualificationTypesRequest listQualificationTypesRequest)
                                                       throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListQualificationTypes operation returns a list of Qualification types, filtered by an optional search term.

Parameters:

listQualificationTypesRequest -

Returns:

Result of the ListQualificationTypes operation returned by the service.

See Also:

• AWS API Documentation

listQualificationTypes

default ListQualificationTypesResponse listQualificationTypes(Consumer<ListQualificationTypesRequest.Builder> listQualificationTypesRequest)
                                                       throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListQualificationTypes operation returns a list of Qualification types, filtered by an optional search term.

This is a convenience which creates an instance of the ListQualificationTypesRequest.Builder avoiding the need to create one manually via ListQualificationTypesRequest.builder()

Parameters:

listQualificationTypesRequest - A Consumer that will call methods on ListQualificationTypesRequest.Builder to create a request.

Returns:

Result of the ListQualificationTypes operation returned by the service.

See Also:

• AWS API Documentation

listQualificationTypesPaginator

default ListQualificationTypesIterable listQualificationTypesPaginator(ListQualificationTypesRequest listQualificationTypesRequest)
                                                                throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listQualificationTypes(software.amazon.awssdk.services.mturk.model.ListQualificationTypesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationTypesIterable responses = client.listQualificationTypesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListQualificationTypesIterable responses = client
             .listQualificationTypesPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListQualificationTypesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationTypesIterable responses = client.listQualificationTypesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listQualificationTypes(software.amazon.awssdk.services.mturk.model.ListQualificationTypesRequest) operation.

Parameters:

listQualificationTypesRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listQualificationTypesPaginator

default ListQualificationTypesIterable listQualificationTypesPaginator(Consumer<ListQualificationTypesRequest.Builder> listQualificationTypesRequest)
                                                                throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listQualificationTypes(software.amazon.awssdk.services.mturk.model.ListQualificationTypesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationTypesIterable responses = client.listQualificationTypesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListQualificationTypesIterable responses = client
             .listQualificationTypesPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListQualificationTypesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListQualificationTypesIterable responses = client.listQualificationTypesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listQualificationTypes(software.amazon.awssdk.services.mturk.model.ListQualificationTypesRequest) operation.

This is a convenience which creates an instance of the ListQualificationTypesRequest.Builder avoiding the need to create one manually via ListQualificationTypesRequest.builder()

Parameters:

listQualificationTypesRequest - A Consumer that will call methods on ListQualificationTypesRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listReviewPolicyResultsForHIT

default ListReviewPolicyResultsForHitResponse listReviewPolicyResultsForHIT(ListReviewPolicyResultsForHitRequest listReviewPolicyResultsForHitRequest)
                                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListReviewPolicyResultsForHIT operation retrieves the computed results and the actions taken in the course of executing your Review Policies for a given HIT. For information about how to specify Review Policies when you call CreateHIT, see Review Policies. The ListReviewPolicyResultsForHIT operation can return results for both Assignment-level and HIT-level review results.

Parameters:

listReviewPolicyResultsForHitRequest -

Returns:

Result of the ListReviewPolicyResultsForHIT operation returned by the service.

See Also:

• AWS API Documentation

listReviewPolicyResultsForHIT

default ListReviewPolicyResultsForHitResponse listReviewPolicyResultsForHIT(Consumer<ListReviewPolicyResultsForHitRequest.Builder> listReviewPolicyResultsForHitRequest)
                                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListReviewPolicyResultsForHIT operation retrieves the computed results and the actions taken in the course of executing your Review Policies for a given HIT. For information about how to specify Review Policies when you call CreateHIT, see Review Policies. The ListReviewPolicyResultsForHIT operation can return results for both Assignment-level and HIT-level review results.

This is a convenience which creates an instance of the ListReviewPolicyResultsForHitRequest.Builder avoiding the need to create one manually via ListReviewPolicyResultsForHitRequest.builder()

Parameters:

listReviewPolicyResultsForHitRequest - A Consumer that will call methods on ListReviewPolicyResultsForHitRequest.Builder to create a request.

Returns:

Result of the ListReviewPolicyResultsForHIT operation returned by the service.

See Also:

• AWS API Documentation

listReviewPolicyResultsForHITPaginator

default ListReviewPolicyResultsForHITIterable listReviewPolicyResultsForHITPaginator(ListReviewPolicyResultsForHitRequest listReviewPolicyResultsForHitRequest)
                                                                              throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listReviewPolicyResultsForHIT(software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewPolicyResultsForHITIterable responses = client.listReviewPolicyResultsForHITPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListReviewPolicyResultsForHITIterable responses = client
             .listReviewPolicyResultsForHITPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewPolicyResultsForHITIterable responses = client.listReviewPolicyResultsForHITPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listReviewPolicyResultsForHIT(software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitRequest) operation.

Parameters:

listReviewPolicyResultsForHitRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listReviewPolicyResultsForHITPaginator

default ListReviewPolicyResultsForHITIterable listReviewPolicyResultsForHITPaginator(Consumer<ListReviewPolicyResultsForHitRequest.Builder> listReviewPolicyResultsForHitRequest)
                                                                              throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listReviewPolicyResultsForHIT(software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewPolicyResultsForHITIterable responses = client.listReviewPolicyResultsForHITPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListReviewPolicyResultsForHITIterable responses = client
             .listReviewPolicyResultsForHITPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewPolicyResultsForHITIterable responses = client.listReviewPolicyResultsForHITPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listReviewPolicyResultsForHIT(software.amazon.awssdk.services.mturk.model.ListReviewPolicyResultsForHitRequest) operation.

This is a convenience which creates an instance of the ListReviewPolicyResultsForHitRequest.Builder avoiding the need to create one manually via ListReviewPolicyResultsForHitRequest.builder()

Parameters:

listReviewPolicyResultsForHitRequest - A Consumer that will call methods on ListReviewPolicyResultsForHitRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listReviewableHITs

default ListReviewableHiTsResponse listReviewableHITs(ListReviewableHiTsRequest listReviewableHiTsRequest)
                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListReviewableHITs operation retrieves the HITs with Status equal to Reviewable or Status equal to Reviewing that belong to the Requester calling the operation.

Parameters:

listReviewableHiTsRequest -

Returns:

Result of the ListReviewableHITs operation returned by the service.

See Also:

• AWS API Documentation

listReviewableHITs

default ListReviewableHiTsResponse listReviewableHITs(Consumer<ListReviewableHiTsRequest.Builder> listReviewableHiTsRequest)
                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListReviewableHITs operation retrieves the HITs with Status equal to Reviewable or Status equal to Reviewing that belong to the Requester calling the operation.

This is a convenience which creates an instance of the ListReviewableHiTsRequest.Builder avoiding the need to create one manually via ListReviewableHiTsRequest.builder()

Parameters:

listReviewableHiTsRequest - A Consumer that will call methods on ListReviewableHiTsRequest.Builder to create a request.

Returns:

Result of the ListReviewableHITs operation returned by the service.

See Also:

• AWS API Documentation

listReviewableHITs

default ListReviewableHiTsResponse listReviewableHITs()
                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListReviewableHITs operation retrieves the HITs with Status equal to Reviewable or Status equal to Reviewing that belong to the Requester calling the operation.

Returns:

Result of the ListReviewableHITs operation returned by the service.

See Also:

• listReviewableHITs(ListReviewableHiTsRequest)
• AWS API Documentation

listReviewableHITsPaginator

default ListReviewableHITsIterable listReviewableHITsPaginator()
                                                        throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client.listReviewableHITsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client
             .listReviewableHITsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListReviewableHiTsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client.listReviewableHITsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• listReviewableHITsPaginator(ListReviewableHiTsRequest)
• AWS API Documentation

listReviewableHITsPaginator

default ListReviewableHITsIterable listReviewableHITsPaginator(ListReviewableHiTsRequest listReviewableHiTsRequest)
                                                        throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client.listReviewableHITsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client
             .listReviewableHITsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListReviewableHiTsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client.listReviewableHITsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation.

Parameters:

listReviewableHiTsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listReviewableHITsPaginator

default ListReviewableHITsIterable listReviewableHITsPaginator(Consumer<ListReviewableHiTsRequest.Builder> listReviewableHiTsRequest)
                                                        throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client.listReviewableHITsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client
             .listReviewableHITsPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListReviewableHiTsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListReviewableHITsIterable responses = client.listReviewableHITsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listReviewableHITs(software.amazon.awssdk.services.mturk.model.ListReviewableHiTsRequest) operation.

This is a convenience which creates an instance of the ListReviewableHiTsRequest.Builder avoiding the need to create one manually via ListReviewableHiTsRequest.builder()

Parameters:

listReviewableHiTsRequest - A Consumer that will call methods on ListReviewableHiTsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listWorkerBlocks

default ListWorkerBlocksResponse listWorkerBlocks(ListWorkerBlocksRequest listWorkerBlocksRequest)
                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListWorkersBlocks operation retrieves a list of Workers who are blocked from working on your HITs.

Parameters:

listWorkerBlocksRequest -

Returns:

Result of the ListWorkerBlocks operation returned by the service.

See Also:

• AWS API Documentation

listWorkerBlocks

default ListWorkerBlocksResponse listWorkerBlocks(Consumer<ListWorkerBlocksRequest.Builder> listWorkerBlocksRequest)
                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListWorkersBlocks operation retrieves a list of Workers who are blocked from working on your HITs.

This is a convenience which creates an instance of the ListWorkerBlocksRequest.Builder avoiding the need to create one manually via ListWorkerBlocksRequest.builder()

Parameters:

listWorkerBlocksRequest - A Consumer that will call methods on ListWorkerBlocksRequest.Builder to create a request.

Returns:

Result of the ListWorkerBlocks operation returned by the service.

See Also:

• AWS API Documentation

listWorkerBlocks

default ListWorkerBlocksResponse listWorkerBlocks()
                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListWorkersBlocks operation retrieves a list of Workers who are blocked from working on your HITs.

Returns:

Result of the ListWorkerBlocks operation returned by the service.

See Also:

• listWorkerBlocks(ListWorkerBlocksRequest)
• AWS API Documentation

listWorkerBlocksPaginator

default ListWorkerBlocksIterable listWorkerBlocksPaginator()
                                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client.listWorkerBlocksPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client
             .listWorkerBlocksPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListWorkerBlocksResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client.listWorkerBlocksPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• listWorkerBlocksPaginator(ListWorkerBlocksRequest)
• AWS API Documentation

listWorkerBlocksPaginator

default ListWorkerBlocksIterable listWorkerBlocksPaginator(ListWorkerBlocksRequest listWorkerBlocksRequest)
                                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client.listWorkerBlocksPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client
             .listWorkerBlocksPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListWorkerBlocksResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client.listWorkerBlocksPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation.

Parameters:

listWorkerBlocksRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listWorkerBlocksPaginator

default ListWorkerBlocksIterable listWorkerBlocksPaginator(Consumer<ListWorkerBlocksRequest.Builder> listWorkerBlocksRequest)
                                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client.listWorkerBlocksPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client
             .listWorkerBlocksPaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListWorkerBlocksResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkerBlocksIterable responses = client.listWorkerBlocksPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listWorkerBlocks(software.amazon.awssdk.services.mturk.model.ListWorkerBlocksRequest) operation.

This is a convenience which creates an instance of the ListWorkerBlocksRequest.Builder avoiding the need to create one manually via ListWorkerBlocksRequest.builder()

Parameters:

listWorkerBlocksRequest - A Consumer that will call methods on ListWorkerBlocksRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listWorkersWithQualificationType

default ListWorkersWithQualificationTypeResponse listWorkersWithQualificationType(ListWorkersWithQualificationTypeRequest listWorkersWithQualificationTypeRequest)
                                                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListWorkersWithQualificationType operation returns all of the Workers that have been associated with a given Qualification type.

Parameters:

listWorkersWithQualificationTypeRequest -

Returns:

Result of the ListWorkersWithQualificationType operation returned by the service.

See Also:

• AWS API Documentation

listWorkersWithQualificationType

default ListWorkersWithQualificationTypeResponse listWorkersWithQualificationType(Consumer<ListWorkersWithQualificationTypeRequest.Builder> listWorkersWithQualificationTypeRequest)
                                                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The ListWorkersWithQualificationType operation returns all of the Workers that have been associated with a given Qualification type.

This is a convenience which creates an instance of the ListWorkersWithQualificationTypeRequest.Builder avoiding the need to create one manually via ListWorkersWithQualificationTypeRequest.builder()

Parameters:

listWorkersWithQualificationTypeRequest - A Consumer that will call methods on ListWorkersWithQualificationTypeRequest.Builder to create a request.

Returns:

Result of the ListWorkersWithQualificationType operation returned by the service.

See Also:

• AWS API Documentation

listWorkersWithQualificationTypePaginator

default ListWorkersWithQualificationTypeIterable listWorkersWithQualificationTypePaginator(ListWorkersWithQualificationTypeRequest listWorkersWithQualificationTypeRequest)
                                                                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listWorkersWithQualificationType(software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkersWithQualificationTypeIterable responses = client.listWorkersWithQualificationTypePaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListWorkersWithQualificationTypeIterable responses = client
             .listWorkersWithQualificationTypePaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkersWithQualificationTypeIterable responses = client.listWorkersWithQualificationTypePaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listWorkersWithQualificationType(software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeRequest) operation.

Parameters:

listWorkersWithQualificationTypeRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listWorkersWithQualificationTypePaginator

default ListWorkersWithQualificationTypeIterable listWorkersWithQualificationTypePaginator(Consumer<ListWorkersWithQualificationTypeRequest.Builder> listWorkersWithQualificationTypeRequest)
                                                                                    throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

This is a variant of listWorkersWithQualificationType(software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkersWithQualificationTypeIterable responses = client.listWorkersWithQualificationTypePaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.mturk.paginators.ListWorkersWithQualificationTypeIterable responses = client
             .listWorkersWithQualificationTypePaginator(request);
     for (software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.mturk.paginators.ListWorkersWithQualificationTypeIterable responses = client.listWorkersWithQualificationTypePaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listWorkersWithQualificationType(software.amazon.awssdk.services.mturk.model.ListWorkersWithQualificationTypeRequest) operation.

This is a convenience which creates an instance of the ListWorkersWithQualificationTypeRequest.Builder avoiding the need to create one manually via ListWorkersWithQualificationTypeRequest.builder()

Parameters:

listWorkersWithQualificationTypeRequest - A Consumer that will call methods on ListWorkersWithQualificationTypeRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

notifyWorkers

default NotifyWorkersResponse notifyWorkers(NotifyWorkersRequest notifyWorkersRequest)
                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The NotifyWorkers operation sends an email to one or more Workers that you specify with the Worker ID. You can specify up to 100 Worker IDs to send the same message with a single call to the NotifyWorkers operation. The NotifyWorkers operation will send a notification email to a Worker only if you have previously approved or rejected work from the Worker.

Parameters:

notifyWorkersRequest -

Returns:

Result of the NotifyWorkers operation returned by the service.

See Also:

• AWS API Documentation

notifyWorkers

default NotifyWorkersResponse notifyWorkers(Consumer<NotifyWorkersRequest.Builder> notifyWorkersRequest)
                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The NotifyWorkers operation sends an email to one or more Workers that you specify with the Worker ID. You can specify up to 100 Worker IDs to send the same message with a single call to the NotifyWorkers operation. The NotifyWorkers operation will send a notification email to a Worker only if you have previously approved or rejected work from the Worker.

This is a convenience which creates an instance of the NotifyWorkersRequest.Builder avoiding the need to create one manually via NotifyWorkersRequest.builder()

Parameters:

notifyWorkersRequest - A Consumer that will call methods on NotifyWorkersRequest.Builder to create a request.

Returns:

Result of the NotifyWorkers operation returned by the service.

See Also:

• AWS API Documentation

rejectAssignment

default RejectAssignmentResponse rejectAssignment(RejectAssignmentRequest rejectAssignmentRequest)
                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The RejectAssignment operation rejects the results of a completed assignment.

You can include an optional feedback message with the rejection, which the Worker can see in the Status section of the web site. When you include a feedback message with the rejection, it helps the Worker understand why the assignment was rejected, and can improve the quality of the results the Worker submits in the future.

Only the Requester who created the HIT can reject an assignment for the HIT.

Parameters:

rejectAssignmentRequest -

Returns:

Result of the RejectAssignment operation returned by the service.

See Also:

• AWS API Documentation

rejectAssignment

default RejectAssignmentResponse rejectAssignment(Consumer<RejectAssignmentRequest.Builder> rejectAssignmentRequest)
                                           throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The RejectAssignment operation rejects the results of a completed assignment.

You can include an optional feedback message with the rejection, which the Worker can see in the Status section of the web site. When you include a feedback message with the rejection, it helps the Worker understand why the assignment was rejected, and can improve the quality of the results the Worker submits in the future.

Only the Requester who created the HIT can reject an assignment for the HIT.

This is a convenience which creates an instance of the RejectAssignmentRequest.Builder avoiding the need to create one manually via RejectAssignmentRequest.builder()

Parameters:

rejectAssignmentRequest - A Consumer that will call methods on RejectAssignmentRequest.Builder to create a request.

Returns:

Result of the RejectAssignment operation returned by the service.

See Also:

• AWS API Documentation

rejectQualificationRequest

default RejectQualificationRequestResponse rejectQualificationRequest(RejectQualificationRequestRequest rejectQualificationRequestRequest)
                                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The RejectQualificationRequest operation rejects a user's request for a Qualification.

You can provide a text message explaining why the request was rejected. The Worker who made the request can see this message.

Parameters:

rejectQualificationRequestRequest -

Returns:

Result of the RejectQualificationRequest operation returned by the service.

See Also:

• AWS API Documentation

rejectQualificationRequest

default RejectQualificationRequestResponse rejectQualificationRequest(Consumer<RejectQualificationRequestRequest.Builder> rejectQualificationRequestRequest)
                                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The RejectQualificationRequest operation rejects a user's request for a Qualification.

You can provide a text message explaining why the request was rejected. The Worker who made the request can see this message.

This is a convenience which creates an instance of the RejectQualificationRequestRequest.Builder avoiding the need to create one manually via RejectQualificationRequestRequest.builder()

Parameters:

rejectQualificationRequestRequest - A Consumer that will call methods on RejectQualificationRequestRequest.Builder to create a request.

Returns:

Result of the RejectQualificationRequest operation returned by the service.

See Also:

• AWS API Documentation

sendBonus

default SendBonusResponse sendBonus(SendBonusRequest sendBonusRequest)
                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The SendBonus operation issues a payment of money from your account to a Worker. This payment happens separately from the reward you pay to the Worker when you approve the Worker's assignment. The SendBonus operation requires the Worker's ID and the assignment ID as parameters to initiate payment of the bonus. You must include a message that explains the reason for the bonus payment, as the Worker may not be expecting the payment. Amazon Mechanical Turk collects a fee for bonus payments, similar to the HIT listing fee. This operation fails if your account does not have enough funds to pay for both the bonus and the fees.

Parameters:

sendBonusRequest -

Returns:

Result of the SendBonus operation returned by the service.

See Also:

• AWS API Documentation

sendBonus

default SendBonusResponse sendBonus(Consumer<SendBonusRequest.Builder> sendBonusRequest)
                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The SendBonus operation issues a payment of money from your account to a Worker. This payment happens separately from the reward you pay to the Worker when you approve the Worker's assignment. The SendBonus operation requires the Worker's ID and the assignment ID as parameters to initiate payment of the bonus. You must include a message that explains the reason for the bonus payment, as the Worker may not be expecting the payment. Amazon Mechanical Turk collects a fee for bonus payments, similar to the HIT listing fee. This operation fails if your account does not have enough funds to pay for both the bonus and the fees.

This is a convenience which creates an instance of the SendBonusRequest.Builder avoiding the need to create one manually via SendBonusRequest.builder()

Parameters:

sendBonusRequest - A Consumer that will call methods on SendBonusRequest.Builder to create a request.

Returns:

Result of the SendBonus operation returned by the service.

See Also:

• AWS API Documentation

sendTestEventNotification

default SendTestEventNotificationResponse sendTestEventNotification(SendTestEventNotificationRequest sendTestEventNotificationRequest)
                                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The SendTestEventNotification operation causes Amazon Mechanical Turk to send a notification message as if a HIT event occurred, according to the provided notification specification. This allows you to test notifications without setting up notifications for a real HIT type and trying to trigger them using the website. When you call this operation, the service attempts to send the test notification immediately.

Parameters:

sendTestEventNotificationRequest -

Returns:

Result of the SendTestEventNotification operation returned by the service.

See Also:

• AWS API Documentation

sendTestEventNotification

default SendTestEventNotificationResponse sendTestEventNotification(Consumer<SendTestEventNotificationRequest.Builder> sendTestEventNotificationRequest)
                                                             throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The SendTestEventNotification operation causes Amazon Mechanical Turk to send a notification message as if a HIT event occurred, according to the provided notification specification. This allows you to test notifications without setting up notifications for a real HIT type and trying to trigger them using the website. When you call this operation, the service attempts to send the test notification immediately.

This is a convenience which creates an instance of the SendTestEventNotificationRequest.Builder avoiding the need to create one manually via SendTestEventNotificationRequest.builder()

Parameters:

sendTestEventNotificationRequest - A Consumer that will call methods on SendTestEventNotificationRequest.Builder to create a request.

Returns:

Result of the SendTestEventNotification operation returned by the service.

See Also:

• AWS API Documentation

updateExpirationForHIT

default UpdateExpirationForHitResponse updateExpirationForHIT(UpdateExpirationForHitRequest updateExpirationForHitRequest)
                                                       throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateExpirationForHIT operation allows you update the expiration time of a HIT. If you update it to a time in the past, the HIT will be immediately expired.

Parameters:

updateExpirationForHitRequest -

Returns:

Result of the UpdateExpirationForHIT operation returned by the service.

See Also:

• AWS API Documentation

updateExpirationForHIT

default UpdateExpirationForHitResponse updateExpirationForHIT(Consumer<UpdateExpirationForHitRequest.Builder> updateExpirationForHitRequest)
                                                       throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateExpirationForHIT operation allows you update the expiration time of a HIT. If you update it to a time in the past, the HIT will be immediately expired.

This is a convenience which creates an instance of the UpdateExpirationForHitRequest.Builder avoiding the need to create one manually via UpdateExpirationForHitRequest.builder()

Parameters:

updateExpirationForHitRequest - A Consumer that will call methods on UpdateExpirationForHitRequest.Builder to create a request.

Returns:

Result of the UpdateExpirationForHIT operation returned by the service.

See Also:

• AWS API Documentation

updateHITReviewStatus

default UpdateHitReviewStatusResponse updateHITReviewStatus(UpdateHitReviewStatusRequest updateHitReviewStatusRequest)
                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateHITReviewStatus operation updates the status of a HIT. If the status is Reviewable, this operation can update the status to Reviewing, or it can revert a Reviewing HIT back to the Reviewable status.

Parameters:

updateHitReviewStatusRequest -

Returns:

Result of the UpdateHITReviewStatus operation returned by the service.

See Also:

• AWS API Documentation

updateHITReviewStatus

default UpdateHitReviewStatusResponse updateHITReviewStatus(Consumer<UpdateHitReviewStatusRequest.Builder> updateHitReviewStatusRequest)
                                                     throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateHITReviewStatus operation updates the status of a HIT. If the status is Reviewable, this operation can update the status to Reviewing, or it can revert a Reviewing HIT back to the Reviewable status.

This is a convenience which creates an instance of the UpdateHitReviewStatusRequest.Builder avoiding the need to create one manually via UpdateHitReviewStatusRequest.builder()

Parameters:

updateHitReviewStatusRequest - A Consumer that will call methods on UpdateHitReviewStatusRequest.Builder to create a request.

Returns:

Result of the UpdateHITReviewStatus operation returned by the service.

See Also:

• AWS API Documentation

updateHITTypeOfHIT

default UpdateHitTypeOfHitResponse updateHITTypeOfHIT(UpdateHitTypeOfHitRequest updateHitTypeOfHitRequest)
                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateHITTypeOfHIT operation allows you to change the HITType properties of a HIT. This operation disassociates the HIT from its old HITType properties and associates it with the new HITType properties. The HIT takes on the properties of the new HITType in place of the old ones.

Parameters:

updateHitTypeOfHitRequest -

Returns:

Result of the UpdateHITTypeOfHIT operation returned by the service.

See Also:

• AWS API Documentation

updateHITTypeOfHIT

default UpdateHitTypeOfHitResponse updateHITTypeOfHIT(Consumer<UpdateHitTypeOfHitRequest.Builder> updateHitTypeOfHitRequest)
                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateHITTypeOfHIT operation allows you to change the HITType properties of a HIT. This operation disassociates the HIT from its old HITType properties and associates it with the new HITType properties. The HIT takes on the properties of the new HITType in place of the old ones.

This is a convenience which creates an instance of the UpdateHitTypeOfHitRequest.Builder avoiding the need to create one manually via UpdateHitTypeOfHitRequest.builder()

Parameters:

updateHitTypeOfHitRequest - A Consumer that will call methods on UpdateHitTypeOfHitRequest.Builder to create a request.

Returns:

Result of the UpdateHITTypeOfHIT operation returned by the service.

See Also:

• AWS API Documentation

updateNotificationSettings

default UpdateNotificationSettingsResponse updateNotificationSettings(UpdateNotificationSettingsRequest updateNotificationSettingsRequest)
                                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateNotificationSettings operation creates, updates, disables or re-enables notifications for a HIT type. If you call the UpdateNotificationSettings operation for a HIT type that already has a notification specification, the operation replaces the old specification with a new one. You can call the UpdateNotificationSettings operation to enable or disable notifications for the HIT type, without having to modify the notification specification itself by providing updates to the Active status without specifying a new notification specification. To change the Active status of a HIT type's notifications, the HIT type must already have a notification specification, or one must be provided in the same call to UpdateNotificationSettings.

Parameters:

updateNotificationSettingsRequest -

Returns:

Result of the UpdateNotificationSettings operation returned by the service.

See Also:

• AWS API Documentation

updateNotificationSettings

default UpdateNotificationSettingsResponse updateNotificationSettings(Consumer<UpdateNotificationSettingsRequest.Builder> updateNotificationSettingsRequest)
                                                               throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateNotificationSettings operation creates, updates, disables or re-enables notifications for a HIT type. If you call the UpdateNotificationSettings operation for a HIT type that already has a notification specification, the operation replaces the old specification with a new one. You can call the UpdateNotificationSettings operation to enable or disable notifications for the HIT type, without having to modify the notification specification itself by providing updates to the Active status without specifying a new notification specification. To change the Active status of a HIT type's notifications, the HIT type must already have a notification specification, or one must be provided in the same call to UpdateNotificationSettings.

This is a convenience which creates an instance of the UpdateNotificationSettingsRequest.Builder avoiding the need to create one manually via UpdateNotificationSettingsRequest.builder()

Parameters:

updateNotificationSettingsRequest - A Consumer that will call methods on UpdateNotificationSettingsRequest.Builder to create a request.

Returns:

Result of the UpdateNotificationSettings operation returned by the service.

See Also:

• AWS API Documentation

updateQualificationType

default UpdateQualificationTypeResponse updateQualificationType(UpdateQualificationTypeRequest updateQualificationTypeRequest)
                                                         throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateQualificationType operation modifies the attributes of an existing Qualification type, which is represented by a QualificationType data structure. Only the owner of a Qualification type can modify its attributes.

Most attributes of a Qualification type can be changed after the type has been created. However, the Name and Keywords fields cannot be modified. The RetryDelayInSeconds parameter can be modified or added to change the delay or to enable retries, but RetryDelayInSeconds cannot be used to disable retries.

You can use this operation to update the test for a Qualification type. The test is updated based on the values specified for the Test, TestDurationInSeconds and AnswerKey parameters. All three parameters specify the updated test. If you are updating the test for a type, you must specify the Test and TestDurationInSeconds parameters. The AnswerKey parameter is optional; omitting it specifies that the updated test does not have an answer key.

If you omit the Test parameter, the test for the Qualification type is unchanged. There is no way to remove a test from a Qualification type that has one. If the type already has a test, you cannot update it to be AutoGranted. If the Qualification type does not have a test and one is provided by an update, the type will henceforth have a test.

If you want to update the test duration or answer key for an existing test without changing the questions, you must specify a Test parameter with the original questions, along with the updated values.

If you provide an updated Test but no AnswerKey, the new test will not have an answer key. Requests for such Qualifications must be granted manually.

You can also update the AutoGranted and AutoGrantedValue attributes of the Qualification type.

Parameters:

updateQualificationTypeRequest -

Returns:

Result of the UpdateQualificationType operation returned by the service.

See Also:

• AWS API Documentation

updateQualificationType

default UpdateQualificationTypeResponse updateQualificationType(Consumer<UpdateQualificationTypeRequest.Builder> updateQualificationTypeRequest)
                                                         throws ServiceException,
RequestErrorException,
AwsServiceException,
SdkClientException,
MTurkException

The UpdateQualificationType operation modifies the attributes of an existing Qualification type, which is represented by a QualificationType data structure. Only the owner of a Qualification type can modify its attributes.

Most attributes of a Qualification type can be changed after the type has been created. However, the Name and Keywords fields cannot be modified. The RetryDelayInSeconds parameter can be modified or added to change the delay or to enable retries, but RetryDelayInSeconds cannot be used to disable retries.

You can use this operation to update the test for a Qualification type. The test is updated based on the values specified for the Test, TestDurationInSeconds and AnswerKey parameters. All three parameters specify the updated test. If you are updating the test for a type, you must specify the Test and TestDurationInSeconds parameters. The AnswerKey parameter is optional; omitting it specifies that the updated test does not have an answer key.

If you omit the Test parameter, the test for the Qualification type is unchanged. There is no way to remove a test from a Qualification type that has one. If the type already has a test, you cannot update it to be AutoGranted. If the Qualification type does not have a test and one is provided by an update, the type will henceforth have a test.

If you want to update the test duration or answer key for an existing test without changing the questions, you must specify a Test parameter with the original questions, along with the updated values.

If you provide an updated Test but no AnswerKey, the new test will not have an answer key. Requests for such Qualifications must be granted manually.

You can also update the AutoGranted and AutoGrantedValue attributes of the Qualification type.

This is a convenience which creates an instance of the UpdateQualificationTypeRequest.Builder avoiding the need to create one manually via UpdateQualificationTypeRequest.builder()

Parameters:

updateQualificationTypeRequest - A Consumer that will call methods on UpdateQualificationTypeRequest.Builder to create a request.

Returns:

Result of the UpdateQualificationType operation returned by the service.

See Also:

• AWS API Documentation

create

static MTurkClient create()

Create a MTurkClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

builder

static MTurkClientBuilder builder()

Create a builder that can be used to configure and create a MTurkClient.

serviceMetadata

static ServiceMetadata serviceMetadata()

serviceClientConfiguration

default MTurkServiceClientConfiguration serviceClientConfiguration()

Description copied from interface: SdkClient

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

Specified by:

serviceClientConfiguration in interface AwsClient

Specified by:

serviceClientConfiguration in interface SdkClient

Returns:

SdkServiceClientConfiguration