Class Eac3AtmosSettings

java.lang.Object
software.amazon.awssdk.services.mediaconvert.model.Eac3AtmosSettings
All Implemented Interfaces:
Serializable, SdkPojo, ToCopyableBuilder<Eac3AtmosSettings.Builder,Eac3AtmosSettings>
@Generated("software.amazon.awssdk:codegen") public final class Eac3AtmosSettings extends Object implements SdkPojo, Serializable, ToCopyableBuilder<Eac3AtmosSettings.Builder,Eac3AtmosSettings>
Required when you set Codec to the value EAC3_ATMOS.
See Also:

  • Method Details

    • bitrate

      public final Integer bitrate()
      Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
      Returns:
      Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.

    • bitstreamMode

      public final Eac3AtmosBitstreamMode bitstreamMode()
      Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

      If the service returns an enum value that is not available in the current SDK version, bitstreamMode will return Eac3AtmosBitstreamMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from bitstreamModeAsString().

      Returns:
      Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
      See Also:

    • bitstreamModeAsString

      public final String bitstreamModeAsString()
      Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

      If the service returns an enum value that is not available in the current SDK version, bitstreamMode will return Eac3AtmosBitstreamMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from bitstreamModeAsString().

      Returns:
      Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
      See Also:

    • codingMode

      public final Eac3AtmosCodingMode codingMode()
      The coding mode for Dolby Digital Plus JOC (Atmos).

      If the service returns an enum value that is not available in the current SDK version, codingMode will return Eac3AtmosCodingMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codingModeAsString().

      Returns:
      The coding mode for Dolby Digital Plus JOC (Atmos).
      See Also:

    • codingModeAsString

      public final String codingModeAsString()
      The coding mode for Dolby Digital Plus JOC (Atmos).

      If the service returns an enum value that is not available in the current SDK version, codingMode will return Eac3AtmosCodingMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codingModeAsString().

      Returns:
      The coding mode for Dolby Digital Plus JOC (Atmos).
      See Also:

    • dialogueIntelligence

      public final Eac3AtmosDialogueIntelligence dialogueIntelligence()
      Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.

      If the service returns an enum value that is not available in the current SDK version, dialogueIntelligence will return Eac3AtmosDialogueIntelligence.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dialogueIntelligenceAsString().

      Returns:
      Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
      See Also:

    • dialogueIntelligenceAsString

      public final String dialogueIntelligenceAsString()
      Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.

      If the service returns an enum value that is not available in the current SDK version, dialogueIntelligence will return Eac3AtmosDialogueIntelligence.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dialogueIntelligenceAsString().

      Returns:
      Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
      See Also:

    • downmixControl

      public final Eac3AtmosDownmixControl downmixControl()
      Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

      If the service returns an enum value that is not available in the current SDK version, downmixControl will return Eac3AtmosDownmixControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from downmixControlAsString().

      Returns:
      Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
      See Also:

    • downmixControlAsString

      public final String downmixControlAsString()
      Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

      If the service returns an enum value that is not available in the current SDK version, downmixControl will return Eac3AtmosDownmixControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from downmixControlAsString().

      Returns:
      Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
      See Also:

    • dynamicRangeCompressionLine

      public final Eac3AtmosDynamicRangeCompressionLine dynamicRangeCompressionLine()
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

      If the service returns an enum value that is not available in the current SDK version, dynamicRangeCompressionLine will return Eac3AtmosDynamicRangeCompressionLine.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicRangeCompressionLineAsString().

      Returns:
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
      See Also:

    • dynamicRangeCompressionLineAsString

      public final String dynamicRangeCompressionLineAsString()
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

      If the service returns an enum value that is not available in the current SDK version, dynamicRangeCompressionLine will return Eac3AtmosDynamicRangeCompressionLine.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicRangeCompressionLineAsString().

      Returns:
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
      See Also:

    • dynamicRangeCompressionRf

      public final Eac3AtmosDynamicRangeCompressionRf dynamicRangeCompressionRf()
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

      If the service returns an enum value that is not available in the current SDK version, dynamicRangeCompressionRf will return Eac3AtmosDynamicRangeCompressionRf.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicRangeCompressionRfAsString().

      Returns:
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
      See Also:

    • dynamicRangeCompressionRfAsString

      public final String dynamicRangeCompressionRfAsString()
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

      If the service returns an enum value that is not available in the current SDK version, dynamicRangeCompressionRf will return Eac3AtmosDynamicRangeCompressionRf.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicRangeCompressionRfAsString().

      Returns:
      Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
      See Also:

    • dynamicRangeControl

      public final Eac3AtmosDynamicRangeControl dynamicRangeControl()
      Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

      If the service returns an enum value that is not available in the current SDK version, dynamicRangeControl will return Eac3AtmosDynamicRangeControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicRangeControlAsString().

      Returns:
      Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
      See Also:

    • dynamicRangeControlAsString

      public final String dynamicRangeControlAsString()
      Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

      If the service returns an enum value that is not available in the current SDK version, dynamicRangeControl will return Eac3AtmosDynamicRangeControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicRangeControlAsString().

      Returns:
      Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.
      See Also:

    • loRoCenterMixLevel

      public final Double loRoCenterMixLevel()
      Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only center.
      Returns:
      Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only center.

    • loRoSurroundMixLevel

      public final Double loRoSurroundMixLevel()
      Specify a value for the following Dolby Atmos setting: Left only/Right only. MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only surround.
      Returns:
      Specify a value for the following Dolby Atmos setting: Left only/Right only. MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only surround.

    • ltRtCenterMixLevel

      public final Double ltRtCenterMixLevel()
      Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left total/Right total center.
      Returns:
      Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left total/Right total center.

    • ltRtSurroundMixLevel

      public final Double ltRtSurroundMixLevel()
      Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, the service ignores Left total/Right total surround.
      Returns:
      Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, the service ignores Left total/Right total surround.

    • meteringMode

      public final Eac3AtmosMeteringMode meteringMode()
      Choose how the service meters the loudness of your audio.

      If the service returns an enum value that is not available in the current SDK version, meteringMode will return Eac3AtmosMeteringMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from meteringModeAsString().

      Returns:
      Choose how the service meters the loudness of your audio.
      See Also:

    • meteringModeAsString

      public final String meteringModeAsString()
      Choose how the service meters the loudness of your audio.

      If the service returns an enum value that is not available in the current SDK version, meteringMode will return Eac3AtmosMeteringMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from meteringModeAsString().

      Returns:
      Choose how the service meters the loudness of your audio.
      See Also:

    • sampleRate

      public final Integer sampleRate()
      This value is always 48000. It represents the sample rate in Hz.
      Returns:
      This value is always 48000. It represents the sample rate in Hz.

    • speechThreshold

      public final Integer speechThreshold()
      Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
      Returns:
      Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%

    • stereoDownmix

      public final Eac3AtmosStereoDownmix stereoDownmix()
      Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.

      If the service returns an enum value that is not available in the current SDK version, stereoDownmix will return Eac3AtmosStereoDownmix.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from stereoDownmixAsString().

      Returns:
      Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.
      See Also:

    • stereoDownmixAsString

      public final String stereoDownmixAsString()
      Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.

      If the service returns an enum value that is not available in the current SDK version, stereoDownmix will return Eac3AtmosStereoDownmix.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from stereoDownmixAsString().

      Returns:
      Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.
      See Also:

    • surroundExMode

      public final Eac3AtmosSurroundExMode surroundExMode()
      Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.

      If the service returns an enum value that is not available in the current SDK version, surroundExMode will return Eac3AtmosSurroundExMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from surroundExModeAsString().

      Returns:
      Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
      See Also:

    • surroundExModeAsString

      public final String surroundExModeAsString()
      Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.

      If the service returns an enum value that is not available in the current SDK version, surroundExMode will return Eac3AtmosSurroundExMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from surroundExModeAsString().

      Returns:
      Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
      See Also:

    • toBuilder

      public Eac3AtmosSettings.Builder toBuilder()
      Description copied from interface: ToCopyableBuilder
      Take this object and create a builder that contains all of the current property values of this object.
      Specified by:
      toBuilder in interface ToCopyableBuilder<Eac3AtmosSettings.Builder,Eac3AtmosSettings>
      Returns:
      a builder for type T

    • builder

      public static Eac3AtmosSettings.Builder builder()

    • serializableBuilderClass

      public static Class<? extends Eac3AtmosSettings.Builder> serializableBuilderClass()

    • hashCode

      public final int hashCode()
      Overrides:
      hashCode in class Object

    • equals

      public final boolean equals(Object obj)
      Overrides:
      equals in class Object

    • equalsBySdkFields

      public final boolean equalsBySdkFields(Object obj)
      Description copied from interface: SdkPojo
      Indicates whether some other object is "equal to" this one by SDK fields. An SDK field is a modeled, non-inherited field in an SdkPojo class, and is generated based on a service model.

      If an SdkPojo class does not have any inherited fields, equalsBySdkFields and equals are essentially the same.

      Specified by:
      equalsBySdkFields in interface SdkPojo
      Parameters:
      obj - the object to be compared with
      Returns:
      true if the other object equals to this object by sdk fields, false otherwise.

    • toString

      public final String toString()
      Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
      Overrides:
      toString in class Object

    • getValueForField

      public final <T> Optional<T> getValueForField(String fieldName, Class<T> clazz)

    • sdkFields

      public final List<SdkField<?>> sdkFields()
      Specified by:
      sdkFields in interface SdkPojo
      Returns:
      List of SdkField in this POJO. May be empty list but should never be null.

    • sdkFieldNameToField

      public final Map<String,SdkField<?>> sdkFieldNameToField()
      Specified by:
      sdkFieldNameToField in interface SdkPojo
      Returns:
      The mapping between the field name and its corresponding field.