Interface SesV2Client

All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface SesV2Client
extends AwsClient

Service client for accessing Amazon SES V2. This can be created using the static builder() method. Amazon SES API v2

Amazon SES is an Amazon Web Services service that you can use to send email messages to your customers.

If you're new to Amazon SES API v2, you might find it helpful to review the Amazon Simple Email Service Developer Guide. The Amazon SES Developer Guide provides information and code samples that demonstrate how to use Amazon SES API v2 features programmatically.

Field Summary

Fields

Modifier and Type	Field	Description
static final String	SERVICE_METADATA_ID	Value for looking up the service's metadata from the ServiceMetadataProvider.
static final String	SERVICE_NAME

Method Summary

Modifier and Type	Method	Description
default BatchGetMetricDataResponse	batchGetMetricData(Consumer<BatchGetMetricDataRequest.Builder> batchGetMetricDataRequest)	Retrieves batches of metric data collected based on your sending activity.
default BatchGetMetricDataResponse	batchGetMetricData(BatchGetMetricDataRequest batchGetMetricDataRequest)	Retrieves batches of metric data collected based on your sending activity.
static SesV2ClientBuilder	builder()	Create a builder that can be used to configure and create a SesV2Client.
default CancelExportJobResponse	cancelExportJob(Consumer<CancelExportJobRequest.Builder> cancelExportJobRequest)	Cancels an export job.
default CancelExportJobResponse	cancelExportJob(CancelExportJobRequest cancelExportJobRequest)	Cancels an export job.
static SesV2Client	create()	Create a SesV2Client with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
default CreateConfigurationSetResponse	createConfigurationSet(Consumer<CreateConfigurationSetRequest.Builder> createConfigurationSetRequest)	Create a configuration set.
default CreateConfigurationSetResponse	createConfigurationSet(CreateConfigurationSetRequest createConfigurationSetRequest)	Create a configuration set.
default CreateConfigurationSetEventDestinationResponse	createConfigurationSetEventDestination(Consumer<CreateConfigurationSetEventDestinationRequest.Builder> createConfigurationSetEventDestinationRequest)	Create an event destination.
default CreateConfigurationSetEventDestinationResponse	createConfigurationSetEventDestination(CreateConfigurationSetEventDestinationRequest createConfigurationSetEventDestinationRequest)	Create an event destination.
default CreateContactResponse	createContact(Consumer<CreateContactRequest.Builder> createContactRequest)	Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.
default CreateContactResponse	createContact(CreateContactRequest createContactRequest)	Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.
default CreateContactListResponse	createContactList(Consumer<CreateContactListRequest.Builder> createContactListRequest)	Creates a contact list.
default CreateContactListResponse	createContactList(CreateContactListRequest createContactListRequest)	Creates a contact list.
default CreateCustomVerificationEmailTemplateResponse	createCustomVerificationEmailTemplate(Consumer<CreateCustomVerificationEmailTemplateRequest.Builder> createCustomVerificationEmailTemplateRequest)	Creates a new custom verification email template.
default CreateCustomVerificationEmailTemplateResponse	createCustomVerificationEmailTemplate(CreateCustomVerificationEmailTemplateRequest createCustomVerificationEmailTemplateRequest)	Creates a new custom verification email template.
default CreateDedicatedIpPoolResponse	createDedicatedIpPool(Consumer<CreateDedicatedIpPoolRequest.Builder> createDedicatedIpPoolRequest)	Create a new pool of dedicated IP addresses.
default CreateDedicatedIpPoolResponse	createDedicatedIpPool(CreateDedicatedIpPoolRequest createDedicatedIpPoolRequest)	Create a new pool of dedicated IP addresses.
default CreateDeliverabilityTestReportResponse	createDeliverabilityTestReport(Consumer<CreateDeliverabilityTestReportRequest.Builder> createDeliverabilityTestReportRequest)	Create a new predictive inbox placement test.
default CreateDeliverabilityTestReportResponse	createDeliverabilityTestReport(CreateDeliverabilityTestReportRequest createDeliverabilityTestReportRequest)	Create a new predictive inbox placement test.
default CreateEmailIdentityResponse	createEmailIdentity(Consumer<CreateEmailIdentityRequest.Builder> createEmailIdentityRequest)	Starts the process of verifying an email identity.
default CreateEmailIdentityResponse	createEmailIdentity(CreateEmailIdentityRequest createEmailIdentityRequest)	Starts the process of verifying an email identity.
default CreateEmailIdentityPolicyResponse	createEmailIdentityPolicy(Consumer<CreateEmailIdentityPolicyRequest.Builder> createEmailIdentityPolicyRequest)	Creates the specified sending authorization policy for the given identity (an email address or a domain).
default CreateEmailIdentityPolicyResponse	createEmailIdentityPolicy(CreateEmailIdentityPolicyRequest createEmailIdentityPolicyRequest)	Creates the specified sending authorization policy for the given identity (an email address or a domain).
default CreateEmailTemplateResponse	createEmailTemplate(Consumer<CreateEmailTemplateRequest.Builder> createEmailTemplateRequest)	Creates an email template.
default CreateEmailTemplateResponse	createEmailTemplate(CreateEmailTemplateRequest createEmailTemplateRequest)	Creates an email template.
default CreateExportJobResponse	createExportJob(Consumer<CreateExportJobRequest.Builder> createExportJobRequest)	Creates an export job for a data source and destination.
default CreateExportJobResponse	createExportJob(CreateExportJobRequest createExportJobRequest)	Creates an export job for a data source and destination.
default CreateImportJobResponse	createImportJob(Consumer<CreateImportJobRequest.Builder> createImportJobRequest)	Creates an import job for a data destination.
default CreateImportJobResponse	createImportJob(CreateImportJobRequest createImportJobRequest)	Creates an import job for a data destination.
default DeleteConfigurationSetResponse	deleteConfigurationSet(Consumer<DeleteConfigurationSetRequest.Builder> deleteConfigurationSetRequest)	Delete an existing configuration set.
default DeleteConfigurationSetResponse	deleteConfigurationSet(DeleteConfigurationSetRequest deleteConfigurationSetRequest)	Delete an existing configuration set.
default DeleteConfigurationSetEventDestinationResponse	deleteConfigurationSetEventDestination(Consumer<DeleteConfigurationSetEventDestinationRequest.Builder> deleteConfigurationSetEventDestinationRequest)	Delete an event destination.
default DeleteConfigurationSetEventDestinationResponse	deleteConfigurationSetEventDestination(DeleteConfigurationSetEventDestinationRequest deleteConfigurationSetEventDestinationRequest)	Delete an event destination.
default DeleteContactResponse	deleteContact(Consumer<DeleteContactRequest.Builder> deleteContactRequest)	Removes a contact from a contact list.
default DeleteContactResponse	deleteContact(DeleteContactRequest deleteContactRequest)	Removes a contact from a contact list.
default DeleteContactListResponse	deleteContactList(Consumer<DeleteContactListRequest.Builder> deleteContactListRequest)	Deletes a contact list and all of the contacts on that list.
default DeleteContactListResponse	deleteContactList(DeleteContactListRequest deleteContactListRequest)	Deletes a contact list and all of the contacts on that list.
default DeleteCustomVerificationEmailTemplateResponse	deleteCustomVerificationEmailTemplate(Consumer<DeleteCustomVerificationEmailTemplateRequest.Builder> deleteCustomVerificationEmailTemplateRequest)	Deletes an existing custom verification email template.
default DeleteCustomVerificationEmailTemplateResponse	deleteCustomVerificationEmailTemplate(DeleteCustomVerificationEmailTemplateRequest deleteCustomVerificationEmailTemplateRequest)	Deletes an existing custom verification email template.
default DeleteDedicatedIpPoolResponse	deleteDedicatedIpPool(Consumer<DeleteDedicatedIpPoolRequest.Builder> deleteDedicatedIpPoolRequest)	Delete a dedicated IP pool.
default DeleteDedicatedIpPoolResponse	deleteDedicatedIpPool(DeleteDedicatedIpPoolRequest deleteDedicatedIpPoolRequest)	Delete a dedicated IP pool.
default DeleteEmailIdentityResponse	deleteEmailIdentity(Consumer<DeleteEmailIdentityRequest.Builder> deleteEmailIdentityRequest)	Deletes an email identity.
default DeleteEmailIdentityResponse	deleteEmailIdentity(DeleteEmailIdentityRequest deleteEmailIdentityRequest)	Deletes an email identity.
default DeleteEmailIdentityPolicyResponse	deleteEmailIdentityPolicy(Consumer<DeleteEmailIdentityPolicyRequest.Builder> deleteEmailIdentityPolicyRequest)	Deletes the specified sending authorization policy for the given identity (an email address or a domain).
default DeleteEmailIdentityPolicyResponse	deleteEmailIdentityPolicy(DeleteEmailIdentityPolicyRequest deleteEmailIdentityPolicyRequest)	Deletes the specified sending authorization policy for the given identity (an email address or a domain).
default DeleteEmailTemplateResponse	deleteEmailTemplate(Consumer<DeleteEmailTemplateRequest.Builder> deleteEmailTemplateRequest)	Deletes an email template.
default DeleteEmailTemplateResponse	deleteEmailTemplate(DeleteEmailTemplateRequest deleteEmailTemplateRequest)	Deletes an email template.
default DeleteSuppressedDestinationResponse	deleteSuppressedDestination(Consumer<DeleteSuppressedDestinationRequest.Builder> deleteSuppressedDestinationRequest)	Removes an email address from the suppression list for your account.
default DeleteSuppressedDestinationResponse	deleteSuppressedDestination(DeleteSuppressedDestinationRequest deleteSuppressedDestinationRequest)	Removes an email address from the suppression list for your account.
default GetAccountResponse	getAccount(Consumer<GetAccountRequest.Builder> getAccountRequest)	Obtain information about the email-sending status and capabilities of your Amazon SES account in the current Amazon Web Services Region.
default GetAccountResponse	getAccount(GetAccountRequest getAccountRequest)	Obtain information about the email-sending status and capabilities of your Amazon SES account in the current Amazon Web Services Region.
default GetBlacklistReportsResponse	getBlacklistReports(Consumer<GetBlacklistReportsRequest.Builder> getBlacklistReportsRequest)	Retrieve a list of the blacklists that your dedicated IP addresses appear on.
default GetBlacklistReportsResponse	getBlacklistReports(GetBlacklistReportsRequest getBlacklistReportsRequest)	Retrieve a list of the blacklists that your dedicated IP addresses appear on.
default GetConfigurationSetResponse	getConfigurationSet(Consumer<GetConfigurationSetRequest.Builder> getConfigurationSetRequest)	Get information about an existing configuration set, including the dedicated IP pool that it's associated with, whether or not it's enabled for sending email, and more.
default GetConfigurationSetResponse	getConfigurationSet(GetConfigurationSetRequest getConfigurationSetRequest)	Get information about an existing configuration set, including the dedicated IP pool that it's associated with, whether or not it's enabled for sending email, and more.
default GetConfigurationSetEventDestinationsResponse	getConfigurationSetEventDestinations(Consumer<GetConfigurationSetEventDestinationsRequest.Builder> getConfigurationSetEventDestinationsRequest)	Retrieve a list of event destinations that are associated with a configuration set.
default GetConfigurationSetEventDestinationsResponse	getConfigurationSetEventDestinations(GetConfigurationSetEventDestinationsRequest getConfigurationSetEventDestinationsRequest)	Retrieve a list of event destinations that are associated with a configuration set.
default GetContactResponse	getContact(Consumer<GetContactRequest.Builder> getContactRequest)	Returns a contact from a contact list.
default GetContactResponse	getContact(GetContactRequest getContactRequest)	Returns a contact from a contact list.
default GetContactListResponse	getContactList(Consumer<GetContactListRequest.Builder> getContactListRequest)	Returns contact list metadata.
default GetContactListResponse	getContactList(GetContactListRequest getContactListRequest)	Returns contact list metadata.
default GetCustomVerificationEmailTemplateResponse	getCustomVerificationEmailTemplate(Consumer<GetCustomVerificationEmailTemplateRequest.Builder> getCustomVerificationEmailTemplateRequest)	Returns the custom email verification template for the template name you specify.
default GetCustomVerificationEmailTemplateResponse	getCustomVerificationEmailTemplate(GetCustomVerificationEmailTemplateRequest getCustomVerificationEmailTemplateRequest)	Returns the custom email verification template for the template name you specify.
default GetDedicatedIpResponse	getDedicatedIp(Consumer<GetDedicatedIpRequest.Builder> getDedicatedIpRequest)	Get information about a dedicated IP address, including the name of the dedicated IP pool that it's associated with, as well information about the automatic warm-up process for the address.
default GetDedicatedIpResponse	getDedicatedIp(GetDedicatedIpRequest getDedicatedIpRequest)	Get information about a dedicated IP address, including the name of the dedicated IP pool that it's associated with, as well information about the automatic warm-up process for the address.
default GetDedicatedIpPoolResponse	getDedicatedIpPool(Consumer<GetDedicatedIpPoolRequest.Builder> getDedicatedIpPoolRequest)	Retrieve information about the dedicated pool.
default GetDedicatedIpPoolResponse	getDedicatedIpPool(GetDedicatedIpPoolRequest getDedicatedIpPoolRequest)	Retrieve information about the dedicated pool.
default GetDedicatedIpsResponse	getDedicatedIps(Consumer<GetDedicatedIpsRequest.Builder> getDedicatedIpsRequest)	List the dedicated IP addresses that are associated with your Amazon Web Services account.
default GetDedicatedIpsResponse	getDedicatedIps(GetDedicatedIpsRequest getDedicatedIpsRequest)	List the dedicated IP addresses that are associated with your Amazon Web Services account.
default GetDedicatedIpsIterable	getDedicatedIpsPaginator(Consumer<GetDedicatedIpsRequest.Builder> getDedicatedIpsRequest)	This is a variant of getDedicatedIps(software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsRequest) operation.
default GetDedicatedIpsIterable	getDedicatedIpsPaginator(GetDedicatedIpsRequest getDedicatedIpsRequest)	This is a variant of getDedicatedIps(software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsRequest) operation.
default GetDeliverabilityDashboardOptionsResponse	getDeliverabilityDashboardOptions(Consumer<GetDeliverabilityDashboardOptionsRequest.Builder> getDeliverabilityDashboardOptionsRequest)	Retrieve information about the status of the Deliverability dashboard for your account.
default GetDeliverabilityDashboardOptionsResponse	getDeliverabilityDashboardOptions(GetDeliverabilityDashboardOptionsRequest getDeliverabilityDashboardOptionsRequest)	Retrieve information about the status of the Deliverability dashboard for your account.
default GetDeliverabilityTestReportResponse	getDeliverabilityTestReport(Consumer<GetDeliverabilityTestReportRequest.Builder> getDeliverabilityTestReportRequest)	Retrieve the results of a predictive inbox placement test.
default GetDeliverabilityTestReportResponse	getDeliverabilityTestReport(GetDeliverabilityTestReportRequest getDeliverabilityTestReportRequest)	Retrieve the results of a predictive inbox placement test.
default GetDomainDeliverabilityCampaignResponse	getDomainDeliverabilityCampaign(Consumer<GetDomainDeliverabilityCampaignRequest.Builder> getDomainDeliverabilityCampaignRequest)	Retrieve all the deliverability data for a specific campaign.
default GetDomainDeliverabilityCampaignResponse	getDomainDeliverabilityCampaign(GetDomainDeliverabilityCampaignRequest getDomainDeliverabilityCampaignRequest)	Retrieve all the deliverability data for a specific campaign.
default GetDomainStatisticsReportResponse	getDomainStatisticsReport(Consumer<GetDomainStatisticsReportRequest.Builder> getDomainStatisticsReportRequest)	Retrieve inbox placement and engagement rates for the domains that you use to send email.
default GetDomainStatisticsReportResponse	getDomainStatisticsReport(GetDomainStatisticsReportRequest getDomainStatisticsReportRequest)	Retrieve inbox placement and engagement rates for the domains that you use to send email.
default GetEmailIdentityResponse	getEmailIdentity(Consumer<GetEmailIdentityRequest.Builder> getEmailIdentityRequest)	Provides information about a specific identity, including the identity's verification status, sending authorization policies, its DKIM authentication status, and its custom Mail-From settings.
default GetEmailIdentityResponse	getEmailIdentity(GetEmailIdentityRequest getEmailIdentityRequest)	Provides information about a specific identity, including the identity's verification status, sending authorization policies, its DKIM authentication status, and its custom Mail-From settings.
default GetEmailIdentityPoliciesResponse	getEmailIdentityPolicies(Consumer<GetEmailIdentityPoliciesRequest.Builder> getEmailIdentityPoliciesRequest)	Returns the requested sending authorization policies for the given identity (an email address or a domain).
default GetEmailIdentityPoliciesResponse	getEmailIdentityPolicies(GetEmailIdentityPoliciesRequest getEmailIdentityPoliciesRequest)	Returns the requested sending authorization policies for the given identity (an email address or a domain).
default GetEmailTemplateResponse	getEmailTemplate(Consumer<GetEmailTemplateRequest.Builder> getEmailTemplateRequest)	Displays the template object (which includes the subject line, HTML part and text part) for the template you specify.
default GetEmailTemplateResponse	getEmailTemplate(GetEmailTemplateRequest getEmailTemplateRequest)	Displays the template object (which includes the subject line, HTML part and text part) for the template you specify.
default GetExportJobResponse	getExportJob(Consumer<GetExportJobRequest.Builder> getExportJobRequest)	Provides information about an export job.
default GetExportJobResponse	getExportJob(GetExportJobRequest getExportJobRequest)	Provides information about an export job.
default GetImportJobResponse	getImportJob(Consumer<GetImportJobRequest.Builder> getImportJobRequest)	Provides information about an import job.
default GetImportJobResponse	getImportJob(GetImportJobRequest getImportJobRequest)	Provides information about an import job.
default GetMessageInsightsResponse	getMessageInsights(Consumer<GetMessageInsightsRequest.Builder> getMessageInsightsRequest)	Provides information about a specific message, including the from address, the subject, the recipient address, email tags, as well as events associated with the message.
default GetMessageInsightsResponse	getMessageInsights(GetMessageInsightsRequest getMessageInsightsRequest)	Provides information about a specific message, including the from address, the subject, the recipient address, email tags, as well as events associated with the message.
default GetSuppressedDestinationResponse	getSuppressedDestination(Consumer<GetSuppressedDestinationRequest.Builder> getSuppressedDestinationRequest)	Retrieves information about a specific email address that's on the suppression list for your account.
default GetSuppressedDestinationResponse	getSuppressedDestination(GetSuppressedDestinationRequest getSuppressedDestinationRequest)	Retrieves information about a specific email address that's on the suppression list for your account.
default ListConfigurationSetsResponse	listConfigurationSets(Consumer<ListConfigurationSetsRequest.Builder> listConfigurationSetsRequest)	List all of the configuration sets associated with your account in the current region.
default ListConfigurationSetsResponse	listConfigurationSets(ListConfigurationSetsRequest listConfigurationSetsRequest)	List all of the configuration sets associated with your account in the current region.
default ListConfigurationSetsIterable	listConfigurationSetsPaginator(Consumer<ListConfigurationSetsRequest.Builder> listConfigurationSetsRequest)	This is a variant of listConfigurationSets(software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsRequest) operation.
default ListConfigurationSetsIterable	listConfigurationSetsPaginator(ListConfigurationSetsRequest listConfigurationSetsRequest)	This is a variant of listConfigurationSets(software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsRequest) operation.
default ListContactListsResponse	listContactLists(Consumer<ListContactListsRequest.Builder> listContactListsRequest)	Lists all of the contact lists available.
default ListContactListsResponse	listContactLists(ListContactListsRequest listContactListsRequest)	Lists all of the contact lists available.
default ListContactListsIterable	listContactListsPaginator(Consumer<ListContactListsRequest.Builder> listContactListsRequest)	This is a variant of listContactLists(software.amazon.awssdk.services.sesv2.model.ListContactListsRequest) operation.
default ListContactListsIterable	listContactListsPaginator(ListContactListsRequest listContactListsRequest)	This is a variant of listContactLists(software.amazon.awssdk.services.sesv2.model.ListContactListsRequest) operation.
default ListContactsResponse	listContacts(Consumer<ListContactsRequest.Builder> listContactsRequest)	Lists the contacts present in a specific contact list.
default ListContactsResponse	listContacts(ListContactsRequest listContactsRequest)	Lists the contacts present in a specific contact list.
default ListContactsIterable	listContactsPaginator(Consumer<ListContactsRequest.Builder> listContactsRequest)	This is a variant of listContacts(software.amazon.awssdk.services.sesv2.model.ListContactsRequest) operation.
default ListContactsIterable	listContactsPaginator(ListContactsRequest listContactsRequest)	This is a variant of listContacts(software.amazon.awssdk.services.sesv2.model.ListContactsRequest) operation.
default ListCustomVerificationEmailTemplatesResponse	listCustomVerificationEmailTemplates(Consumer<ListCustomVerificationEmailTemplatesRequest.Builder> listCustomVerificationEmailTemplatesRequest)	Lists the existing custom verification email templates for your account in the current Amazon Web Services Region.
default ListCustomVerificationEmailTemplatesResponse	listCustomVerificationEmailTemplates(ListCustomVerificationEmailTemplatesRequest listCustomVerificationEmailTemplatesRequest)	Lists the existing custom verification email templates for your account in the current Amazon Web Services Region.
default ListCustomVerificationEmailTemplatesIterable	listCustomVerificationEmailTemplatesPaginator(Consumer<ListCustomVerificationEmailTemplatesRequest.Builder> listCustomVerificationEmailTemplatesRequest)	This is a variant of listCustomVerificationEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesRequest) operation.
default ListCustomVerificationEmailTemplatesIterable	listCustomVerificationEmailTemplatesPaginator(ListCustomVerificationEmailTemplatesRequest listCustomVerificationEmailTemplatesRequest)	This is a variant of listCustomVerificationEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesRequest) operation.
default ListDedicatedIpPoolsResponse	listDedicatedIpPools(Consumer<ListDedicatedIpPoolsRequest.Builder> listDedicatedIpPoolsRequest)	List all of the dedicated IP pools that exist in your Amazon Web Services account in the current Region.
default ListDedicatedIpPoolsResponse	listDedicatedIpPools(ListDedicatedIpPoolsRequest listDedicatedIpPoolsRequest)	List all of the dedicated IP pools that exist in your Amazon Web Services account in the current Region.
default ListDedicatedIpPoolsIterable	listDedicatedIpPoolsPaginator(Consumer<ListDedicatedIpPoolsRequest.Builder> listDedicatedIpPoolsRequest)	This is a variant of listDedicatedIpPools(software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsRequest) operation.
default ListDedicatedIpPoolsIterable	listDedicatedIpPoolsPaginator(ListDedicatedIpPoolsRequest listDedicatedIpPoolsRequest)	This is a variant of listDedicatedIpPools(software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsRequest) operation.
default ListDeliverabilityTestReportsResponse	listDeliverabilityTestReports(Consumer<ListDeliverabilityTestReportsRequest.Builder> listDeliverabilityTestReportsRequest)	Show a list of the predictive inbox placement tests that you've performed, regardless of their statuses.
default ListDeliverabilityTestReportsResponse	listDeliverabilityTestReports(ListDeliverabilityTestReportsRequest listDeliverabilityTestReportsRequest)	Show a list of the predictive inbox placement tests that you've performed, regardless of their statuses.
default ListDeliverabilityTestReportsIterable	listDeliverabilityTestReportsPaginator(Consumer<ListDeliverabilityTestReportsRequest.Builder> listDeliverabilityTestReportsRequest)	This is a variant of listDeliverabilityTestReports(software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsRequest) operation.
default ListDeliverabilityTestReportsIterable	listDeliverabilityTestReportsPaginator(ListDeliverabilityTestReportsRequest listDeliverabilityTestReportsRequest)	This is a variant of listDeliverabilityTestReports(software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsRequest) operation.
default ListDomainDeliverabilityCampaignsResponse	listDomainDeliverabilityCampaigns(Consumer<ListDomainDeliverabilityCampaignsRequest.Builder> listDomainDeliverabilityCampaignsRequest)	Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range.
default ListDomainDeliverabilityCampaignsResponse	listDomainDeliverabilityCampaigns(ListDomainDeliverabilityCampaignsRequest listDomainDeliverabilityCampaignsRequest)	Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range.
default ListDomainDeliverabilityCampaignsIterable	listDomainDeliverabilityCampaignsPaginator(Consumer<ListDomainDeliverabilityCampaignsRequest.Builder> listDomainDeliverabilityCampaignsRequest)	This is a variant of listDomainDeliverabilityCampaigns(software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsRequest) operation.
default ListDomainDeliverabilityCampaignsIterable	listDomainDeliverabilityCampaignsPaginator(ListDomainDeliverabilityCampaignsRequest listDomainDeliverabilityCampaignsRequest)	This is a variant of listDomainDeliverabilityCampaigns(software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsRequest) operation.
default ListEmailIdentitiesResponse	listEmailIdentities(Consumer<ListEmailIdentitiesRequest.Builder> listEmailIdentitiesRequest)	Returns a list of all of the email identities that are associated with your Amazon Web Services account.
default ListEmailIdentitiesResponse	listEmailIdentities(ListEmailIdentitiesRequest listEmailIdentitiesRequest)	Returns a list of all of the email identities that are associated with your Amazon Web Services account.
default ListEmailIdentitiesIterable	listEmailIdentitiesPaginator(Consumer<ListEmailIdentitiesRequest.Builder> listEmailIdentitiesRequest)	This is a variant of listEmailIdentities(software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesRequest) operation.
default ListEmailIdentitiesIterable	listEmailIdentitiesPaginator(ListEmailIdentitiesRequest listEmailIdentitiesRequest)	This is a variant of listEmailIdentities(software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesRequest) operation.
default ListEmailTemplatesResponse	listEmailTemplates(Consumer<ListEmailTemplatesRequest.Builder> listEmailTemplatesRequest)	Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region.
default ListEmailTemplatesResponse	listEmailTemplates(ListEmailTemplatesRequest listEmailTemplatesRequest)	Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region.
default ListEmailTemplatesIterable	listEmailTemplatesPaginator(Consumer<ListEmailTemplatesRequest.Builder> listEmailTemplatesRequest)	This is a variant of listEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesRequest) operation.
default ListEmailTemplatesIterable	listEmailTemplatesPaginator(ListEmailTemplatesRequest listEmailTemplatesRequest)	This is a variant of listEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesRequest) operation.
default ListExportJobsResponse	listExportJobs(Consumer<ListExportJobsRequest.Builder> listExportJobsRequest)	Lists all of the export jobs.
default ListExportJobsResponse	listExportJobs(ListExportJobsRequest listExportJobsRequest)	Lists all of the export jobs.
default ListExportJobsIterable	listExportJobsPaginator(Consumer<ListExportJobsRequest.Builder> listExportJobsRequest)	This is a variant of listExportJobs(software.amazon.awssdk.services.sesv2.model.ListExportJobsRequest) operation.
default ListExportJobsIterable	listExportJobsPaginator(ListExportJobsRequest listExportJobsRequest)	This is a variant of listExportJobs(software.amazon.awssdk.services.sesv2.model.ListExportJobsRequest) operation.
default ListImportJobsResponse	listImportJobs(Consumer<ListImportJobsRequest.Builder> listImportJobsRequest)	Lists all of the import jobs.
default ListImportJobsResponse	listImportJobs(ListImportJobsRequest listImportJobsRequest)	Lists all of the import jobs.
default ListImportJobsIterable	listImportJobsPaginator(Consumer<ListImportJobsRequest.Builder> listImportJobsRequest)	This is a variant of listImportJobs(software.amazon.awssdk.services.sesv2.model.ListImportJobsRequest) operation.
default ListImportJobsIterable	listImportJobsPaginator(ListImportJobsRequest listImportJobsRequest)	This is a variant of listImportJobs(software.amazon.awssdk.services.sesv2.model.ListImportJobsRequest) operation.
default ListRecommendationsResponse	listRecommendations(Consumer<ListRecommendationsRequest.Builder> listRecommendationsRequest)	Lists the recommendations present in your Amazon SES account in the current Amazon Web Services Region.
default ListRecommendationsResponse	listRecommendations(ListRecommendationsRequest listRecommendationsRequest)	Lists the recommendations present in your Amazon SES account in the current Amazon Web Services Region.
default ListRecommendationsIterable	listRecommendationsPaginator(Consumer<ListRecommendationsRequest.Builder> listRecommendationsRequest)	This is a variant of listRecommendations(software.amazon.awssdk.services.sesv2.model.ListRecommendationsRequest) operation.
default ListRecommendationsIterable	listRecommendationsPaginator(ListRecommendationsRequest listRecommendationsRequest)	This is a variant of listRecommendations(software.amazon.awssdk.services.sesv2.model.ListRecommendationsRequest) operation.
default ListSuppressedDestinationsResponse	listSuppressedDestinations(Consumer<ListSuppressedDestinationsRequest.Builder> listSuppressedDestinationsRequest)	Retrieves a list of email addresses that are on the suppression list for your account.
default ListSuppressedDestinationsResponse	listSuppressedDestinations(ListSuppressedDestinationsRequest listSuppressedDestinationsRequest)	Retrieves a list of email addresses that are on the suppression list for your account.
default ListSuppressedDestinationsIterable	listSuppressedDestinationsPaginator(Consumer<ListSuppressedDestinationsRequest.Builder> listSuppressedDestinationsRequest)	This is a variant of listSuppressedDestinations(software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsRequest) operation.
default ListSuppressedDestinationsIterable	listSuppressedDestinationsPaginator(ListSuppressedDestinationsRequest listSuppressedDestinationsRequest)	This is a variant of listSuppressedDestinations(software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsRequest) operation.
default ListTagsForResourceResponse	listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)	Retrieve a list of the tags (keys and values) that are associated with a specified resource.
default ListTagsForResourceResponse	listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)	Retrieve a list of the tags (keys and values) that are associated with a specified resource.
default PutAccountDedicatedIpWarmupAttributesResponse	putAccountDedicatedIpWarmupAttributes(Consumer<PutAccountDedicatedIpWarmupAttributesRequest.Builder> putAccountDedicatedIpWarmupAttributesRequest)	Enable or disable the automatic warm-up feature for dedicated IP addresses.
default PutAccountDedicatedIpWarmupAttributesResponse	putAccountDedicatedIpWarmupAttributes(PutAccountDedicatedIpWarmupAttributesRequest putAccountDedicatedIpWarmupAttributesRequest)	Enable or disable the automatic warm-up feature for dedicated IP addresses.
default PutAccountDetailsResponse	putAccountDetails(Consumer<PutAccountDetailsRequest.Builder> putAccountDetailsRequest)	Update your Amazon SES account details.
default PutAccountDetailsResponse	putAccountDetails(PutAccountDetailsRequest putAccountDetailsRequest)	Update your Amazon SES account details.
default PutAccountSendingAttributesResponse	putAccountSendingAttributes(Consumer<PutAccountSendingAttributesRequest.Builder> putAccountSendingAttributesRequest)	Enable or disable the ability of your account to send email.
default PutAccountSendingAttributesResponse	putAccountSendingAttributes(PutAccountSendingAttributesRequest putAccountSendingAttributesRequest)	Enable or disable the ability of your account to send email.
default PutAccountSuppressionAttributesResponse	putAccountSuppressionAttributes(Consumer<PutAccountSuppressionAttributesRequest.Builder> putAccountSuppressionAttributesRequest)	Change the settings for the account-level suppression list.
default PutAccountSuppressionAttributesResponse	putAccountSuppressionAttributes(PutAccountSuppressionAttributesRequest putAccountSuppressionAttributesRequest)	Change the settings for the account-level suppression list.
default PutAccountVdmAttributesResponse	putAccountVdmAttributes(Consumer<PutAccountVdmAttributesRequest.Builder> putAccountVdmAttributesRequest)	Update your Amazon SES account VDM attributes.
default PutAccountVdmAttributesResponse	putAccountVdmAttributes(PutAccountVdmAttributesRequest putAccountVdmAttributesRequest)	Update your Amazon SES account VDM attributes.
default PutConfigurationSetDeliveryOptionsResponse	putConfigurationSetDeliveryOptions(Consumer<PutConfigurationSetDeliveryOptionsRequest.Builder> putConfigurationSetDeliveryOptionsRequest)	Associate a configuration set with a dedicated IP pool.
default PutConfigurationSetDeliveryOptionsResponse	putConfigurationSetDeliveryOptions(PutConfigurationSetDeliveryOptionsRequest putConfigurationSetDeliveryOptionsRequest)	Associate a configuration set with a dedicated IP pool.
default PutConfigurationSetReputationOptionsResponse	putConfigurationSetReputationOptions(Consumer<PutConfigurationSetReputationOptionsRequest.Builder> putConfigurationSetReputationOptionsRequest)	Enable or disable collection of reputation metrics for emails that you send using a particular configuration set in a specific Amazon Web Services Region.
default PutConfigurationSetReputationOptionsResponse	putConfigurationSetReputationOptions(PutConfigurationSetReputationOptionsRequest putConfigurationSetReputationOptionsRequest)	Enable or disable collection of reputation metrics for emails that you send using a particular configuration set in a specific Amazon Web Services Region.
default PutConfigurationSetSendingOptionsResponse	putConfigurationSetSendingOptions(Consumer<PutConfigurationSetSendingOptionsRequest.Builder> putConfigurationSetSendingOptionsRequest)	Enable or disable email sending for messages that use a particular configuration set in a specific Amazon Web Services Region.
default PutConfigurationSetSendingOptionsResponse	putConfigurationSetSendingOptions(PutConfigurationSetSendingOptionsRequest putConfigurationSetSendingOptionsRequest)	Enable or disable email sending for messages that use a particular configuration set in a specific Amazon Web Services Region.
default PutConfigurationSetSuppressionOptionsResponse	putConfigurationSetSuppressionOptions(Consumer<PutConfigurationSetSuppressionOptionsRequest.Builder> putConfigurationSetSuppressionOptionsRequest)	Specify the account suppression list preferences for a configuration set.
default PutConfigurationSetSuppressionOptionsResponse	putConfigurationSetSuppressionOptions(PutConfigurationSetSuppressionOptionsRequest putConfigurationSetSuppressionOptionsRequest)	Specify the account suppression list preferences for a configuration set.
default PutConfigurationSetTrackingOptionsResponse	putConfigurationSetTrackingOptions(Consumer<PutConfigurationSetTrackingOptionsRequest.Builder> putConfigurationSetTrackingOptionsRequest)	Specify a custom domain to use for open and click tracking elements in email that you send.
default PutConfigurationSetTrackingOptionsResponse	putConfigurationSetTrackingOptions(PutConfigurationSetTrackingOptionsRequest putConfigurationSetTrackingOptionsRequest)	Specify a custom domain to use for open and click tracking elements in email that you send.
default PutConfigurationSetVdmOptionsResponse	putConfigurationSetVdmOptions(Consumer<PutConfigurationSetVdmOptionsRequest.Builder> putConfigurationSetVdmOptionsRequest)	Specify VDM preferences for email that you send using the configuration set.
default PutConfigurationSetVdmOptionsResponse	putConfigurationSetVdmOptions(PutConfigurationSetVdmOptionsRequest putConfigurationSetVdmOptionsRequest)	Specify VDM preferences for email that you send using the configuration set.
default PutDedicatedIpInPoolResponse	putDedicatedIpInPool(Consumer<PutDedicatedIpInPoolRequest.Builder> putDedicatedIpInPoolRequest)	Move a dedicated IP address to an existing dedicated IP pool.
default PutDedicatedIpInPoolResponse	putDedicatedIpInPool(PutDedicatedIpInPoolRequest putDedicatedIpInPoolRequest)	Move a dedicated IP address to an existing dedicated IP pool.
default PutDedicatedIpPoolScalingAttributesResponse	putDedicatedIpPoolScalingAttributes(Consumer<PutDedicatedIpPoolScalingAttributesRequest.Builder> putDedicatedIpPoolScalingAttributesRequest)	Used to convert a dedicated IP pool to a different scaling mode.
default PutDedicatedIpPoolScalingAttributesResponse	putDedicatedIpPoolScalingAttributes(PutDedicatedIpPoolScalingAttributesRequest putDedicatedIpPoolScalingAttributesRequest)	Used to convert a dedicated IP pool to a different scaling mode.
default PutDedicatedIpWarmupAttributesResponse	putDedicatedIpWarmupAttributes(Consumer<PutDedicatedIpWarmupAttributesRequest.Builder> putDedicatedIpWarmupAttributesRequest)
default PutDedicatedIpWarmupAttributesResponse	putDedicatedIpWarmupAttributes(PutDedicatedIpWarmupAttributesRequest putDedicatedIpWarmupAttributesRequest)
default PutDeliverabilityDashboardOptionResponse	putDeliverabilityDashboardOption(Consumer<PutDeliverabilityDashboardOptionRequest.Builder> putDeliverabilityDashboardOptionRequest)	Enable or disable the Deliverability dashboard.
default PutDeliverabilityDashboardOptionResponse	putDeliverabilityDashboardOption(PutDeliverabilityDashboardOptionRequest putDeliverabilityDashboardOptionRequest)	Enable or disable the Deliverability dashboard.
default PutEmailIdentityConfigurationSetAttributesResponse	putEmailIdentityConfigurationSetAttributes(Consumer<PutEmailIdentityConfigurationSetAttributesRequest.Builder> putEmailIdentityConfigurationSetAttributesRequest)	Used to associate a configuration set with an email identity.
default PutEmailIdentityConfigurationSetAttributesResponse	putEmailIdentityConfigurationSetAttributes(PutEmailIdentityConfigurationSetAttributesRequest putEmailIdentityConfigurationSetAttributesRequest)	Used to associate a configuration set with an email identity.
default PutEmailIdentityDkimAttributesResponse	putEmailIdentityDkimAttributes(Consumer<PutEmailIdentityDkimAttributesRequest.Builder> putEmailIdentityDkimAttributesRequest)	Used to enable or disable DKIM authentication for an email identity.
default PutEmailIdentityDkimAttributesResponse	putEmailIdentityDkimAttributes(PutEmailIdentityDkimAttributesRequest putEmailIdentityDkimAttributesRequest)	Used to enable or disable DKIM authentication for an email identity.
default PutEmailIdentityDkimSigningAttributesResponse	putEmailIdentityDkimSigningAttributes(Consumer<PutEmailIdentityDkimSigningAttributesRequest.Builder> putEmailIdentityDkimSigningAttributesRequest)	Used to configure or change the DKIM authentication settings for an email domain identity.
default PutEmailIdentityDkimSigningAttributesResponse	putEmailIdentityDkimSigningAttributes(PutEmailIdentityDkimSigningAttributesRequest putEmailIdentityDkimSigningAttributesRequest)	Used to configure or change the DKIM authentication settings for an email domain identity.
default PutEmailIdentityFeedbackAttributesResponse	putEmailIdentityFeedbackAttributes(Consumer<PutEmailIdentityFeedbackAttributesRequest.Builder> putEmailIdentityFeedbackAttributesRequest)	Used to enable or disable feedback forwarding for an identity.
default PutEmailIdentityFeedbackAttributesResponse	putEmailIdentityFeedbackAttributes(PutEmailIdentityFeedbackAttributesRequest putEmailIdentityFeedbackAttributesRequest)	Used to enable or disable feedback forwarding for an identity.
default PutEmailIdentityMailFromAttributesResponse	putEmailIdentityMailFromAttributes(Consumer<PutEmailIdentityMailFromAttributesRequest.Builder> putEmailIdentityMailFromAttributesRequest)	Used to enable or disable the custom Mail-From domain configuration for an email identity.
default PutEmailIdentityMailFromAttributesResponse	putEmailIdentityMailFromAttributes(PutEmailIdentityMailFromAttributesRequest putEmailIdentityMailFromAttributesRequest)	Used to enable or disable the custom Mail-From domain configuration for an email identity.
default PutSuppressedDestinationResponse	putSuppressedDestination(Consumer<PutSuppressedDestinationRequest.Builder> putSuppressedDestinationRequest)	Adds an email address to the suppression list for your account.
default PutSuppressedDestinationResponse	putSuppressedDestination(PutSuppressedDestinationRequest putSuppressedDestinationRequest)	Adds an email address to the suppression list for your account.
default SendBulkEmailResponse	sendBulkEmail(Consumer<SendBulkEmailRequest.Builder> sendBulkEmailRequest)	Composes an email message to multiple destinations.
default SendBulkEmailResponse	sendBulkEmail(SendBulkEmailRequest sendBulkEmailRequest)	Composes an email message to multiple destinations.
default SendCustomVerificationEmailResponse	sendCustomVerificationEmail(Consumer<SendCustomVerificationEmailRequest.Builder> sendCustomVerificationEmailRequest)	Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it.
default SendCustomVerificationEmailResponse	sendCustomVerificationEmail(SendCustomVerificationEmailRequest sendCustomVerificationEmailRequest)	Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it.
default SendEmailResponse	sendEmail(Consumer<SendEmailRequest.Builder> sendEmailRequest)	Sends an email message.
default SendEmailResponse	sendEmail(SendEmailRequest sendEmailRequest)	Sends an email message.
default SesV2ServiceClientConfiguration	serviceClientConfiguration()	The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
static ServiceMetadata	serviceMetadata()
default TagResourceResponse	tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)	Add one or more tags (keys and values) to a specified resource.
default TagResourceResponse	tagResource(TagResourceRequest tagResourceRequest)	Add one or more tags (keys and values) to a specified resource.
default TestRenderEmailTemplateResponse	testRenderEmailTemplate(Consumer<TestRenderEmailTemplateRequest.Builder> testRenderEmailTemplateRequest)	Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.
default TestRenderEmailTemplateResponse	testRenderEmailTemplate(TestRenderEmailTemplateRequest testRenderEmailTemplateRequest)	Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.
default UntagResourceResponse	untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)	Remove one or more tags (keys and values) from a specified resource.
default UntagResourceResponse	untagResource(UntagResourceRequest untagResourceRequest)	Remove one or more tags (keys and values) from a specified resource.
default UpdateConfigurationSetEventDestinationResponse	updateConfigurationSetEventDestination(Consumer<UpdateConfigurationSetEventDestinationRequest.Builder> updateConfigurationSetEventDestinationRequest)	Update the configuration of an event destination for a configuration set.
default UpdateConfigurationSetEventDestinationResponse	updateConfigurationSetEventDestination(UpdateConfigurationSetEventDestinationRequest updateConfigurationSetEventDestinationRequest)	Update the configuration of an event destination for a configuration set.
default UpdateContactResponse	updateContact(Consumer<UpdateContactRequest.Builder> updateContactRequest)	Updates a contact's preferences for a list.
default UpdateContactResponse	updateContact(UpdateContactRequest updateContactRequest)	Updates a contact's preferences for a list.
default UpdateContactListResponse	updateContactList(Consumer<UpdateContactListRequest.Builder> updateContactListRequest)	Updates contact list metadata.
default UpdateContactListResponse	updateContactList(UpdateContactListRequest updateContactListRequest)	Updates contact list metadata.
default UpdateCustomVerificationEmailTemplateResponse	updateCustomVerificationEmailTemplate(Consumer<UpdateCustomVerificationEmailTemplateRequest.Builder> updateCustomVerificationEmailTemplateRequest)	Updates an existing custom verification email template.
default UpdateCustomVerificationEmailTemplateResponse	updateCustomVerificationEmailTemplate(UpdateCustomVerificationEmailTemplateRequest updateCustomVerificationEmailTemplateRequest)	Updates an existing custom verification email template.
default UpdateEmailIdentityPolicyResponse	updateEmailIdentityPolicy(Consumer<UpdateEmailIdentityPolicyRequest.Builder> updateEmailIdentityPolicyRequest)	Updates the specified sending authorization policy for the given identity (an email address or a domain).
default UpdateEmailIdentityPolicyResponse	updateEmailIdentityPolicy(UpdateEmailIdentityPolicyRequest updateEmailIdentityPolicyRequest)	Updates the specified sending authorization policy for the given identity (an email address or a domain).
default UpdateEmailTemplateResponse	updateEmailTemplate(Consumer<UpdateEmailTemplateRequest.Builder> updateEmailTemplateRequest)	Updates an email template.
default UpdateEmailTemplateResponse	updateEmailTemplate(UpdateEmailTemplateRequest updateEmailTemplateRequest)	Updates an email template.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

close

Methods inherited from interface software.amazon.awssdk.core.SdkClient

serviceName

Field Details

SERVICE_NAME

static final String SERVICE_NAME

See Also:

• Constant Field Values

SERVICE_METADATA_ID

static final String SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

See Also:

• Constant Field Values

Method Details

batchGetMetricData

default BatchGetMetricDataResponse batchGetMetricData(BatchGetMetricDataRequest batchGetMetricDataRequest)
                                               throws BadRequestException,
InternalServiceErrorException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieves batches of metric data collected based on your sending activity.

You can execute this operation no more than 16 times per second, and with at most 160 queries from the batches per second (cumulative).

Parameters:

batchGetMetricDataRequest - Represents a request to retrieve a batch of metric data.

Returns:

Result of the BatchGetMetricData operation returned by the service.

See Also:

• AWS API Documentation

batchGetMetricData

default BatchGetMetricDataResponse batchGetMetricData(Consumer<BatchGetMetricDataRequest.Builder> batchGetMetricDataRequest)
                                               throws BadRequestException,
InternalServiceErrorException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieves batches of metric data collected based on your sending activity.

You can execute this operation no more than 16 times per second, and with at most 160 queries from the batches per second (cumulative).

This is a convenience which creates an instance of the BatchGetMetricDataRequest.Builder avoiding the need to create one manually via BatchGetMetricDataRequest.builder()

Parameters:

batchGetMetricDataRequest - A Consumer that will call methods on BatchGetMetricDataRequest.Builder to create a request. Represents a request to retrieve a batch of metric data.

Returns:

Result of the BatchGetMetricData operation returned by the service.

See Also:

• AWS API Documentation

cancelExportJob

default CancelExportJobResponse cancelExportJob(CancelExportJobRequest cancelExportJobRequest)
                                         throws NotFoundException,
BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Cancels an export job.

Parameters:

cancelExportJobRequest - Represents a request to cancel an export job using the export job ID.

Returns:

Result of the CancelExportJob operation returned by the service.

See Also:

• AWS API Documentation

cancelExportJob

default CancelExportJobResponse cancelExportJob(Consumer<CancelExportJobRequest.Builder> cancelExportJobRequest)
                                         throws NotFoundException,
BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Cancels an export job.

This is a convenience which creates an instance of the CancelExportJobRequest.Builder avoiding the need to create one manually via CancelExportJobRequest.builder()

Parameters:

cancelExportJobRequest - A Consumer that will call methods on CancelExportJobRequest.Builder to create a request. Represents a request to cancel an export job using the export job ID.

Returns:

Result of the CancelExportJob operation returned by the service.

See Also:

• AWS API Documentation

createConfigurationSet

default CreateConfigurationSetResponse createConfigurationSet(CreateConfigurationSetRequest createConfigurationSetRequest)
                                                       throws AlreadyExistsException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create a configuration set. Configuration sets are groups of rules that you can apply to the emails that you send. You apply a configuration set to an email by specifying the name of the configuration set when you call the Amazon SES API v2. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

Parameters:

createConfigurationSetRequest - A request to create a configuration set.

Returns:

Result of the CreateConfigurationSet operation returned by the service.

See Also:

• AWS API Documentation

createConfigurationSet

default CreateConfigurationSetResponse createConfigurationSet(Consumer<CreateConfigurationSetRequest.Builder> createConfigurationSetRequest)
                                                       throws AlreadyExistsException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create a configuration set. Configuration sets are groups of rules that you can apply to the emails that you send. You apply a configuration set to an email by specifying the name of the configuration set when you call the Amazon SES API v2. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

This is a convenience which creates an instance of the CreateConfigurationSetRequest.Builder avoiding the need to create one manually via CreateConfigurationSetRequest.builder()

Parameters:

createConfigurationSetRequest - A Consumer that will call methods on CreateConfigurationSetRequest.Builder to create a request. A request to create a configuration set.

Returns:

Result of the CreateConfigurationSet operation returned by the service.

See Also:

• AWS API Documentation

createConfigurationSetEventDestination

default CreateConfigurationSetEventDestinationResponse createConfigurationSetEventDestination(CreateConfigurationSetEventDestinationRequest createConfigurationSetEventDestinationRequest)
                                                                                       throws NotFoundException,
AlreadyExistsException,
LimitExceededException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create an event destination. Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

A single configuration set can include more than one event destination.

Parameters:

createConfigurationSetEventDestinationRequest - A request to add an event destination to a configuration set.

Returns:

Result of the CreateConfigurationSetEventDestination operation returned by the service.

See Also:

• AWS API Documentation

createConfigurationSetEventDestination

default CreateConfigurationSetEventDestinationResponse createConfigurationSetEventDestination(Consumer<CreateConfigurationSetEventDestinationRequest.Builder> createConfigurationSetEventDestinationRequest)
                                                                                       throws NotFoundException,
AlreadyExistsException,
LimitExceededException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create an event destination. Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

A single configuration set can include more than one event destination.

This is a convenience which creates an instance of the CreateConfigurationSetEventDestinationRequest.Builder avoiding the need to create one manually via CreateConfigurationSetEventDestinationRequest.builder()

Parameters:

createConfigurationSetEventDestinationRequest - A Consumer that will call methods on CreateConfigurationSetEventDestinationRequest.Builder to create a request. A request to add an event destination to a configuration set.

Returns:

Result of the CreateConfigurationSetEventDestination operation returned by the service.

See Also:

• AWS API Documentation

createContact

default CreateContactResponse createContact(CreateContactRequest createContactRequest)
                                     throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AlreadyExistsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.

Parameters:

createContactRequest -

Returns:

Result of the CreateContact operation returned by the service.

See Also:

• AWS API Documentation

createContact

default CreateContactResponse createContact(Consumer<CreateContactRequest.Builder> createContactRequest)
                                     throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AlreadyExistsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.

This is a convenience which creates an instance of the CreateContactRequest.Builder avoiding the need to create one manually via CreateContactRequest.builder()

Parameters:

createContactRequest - A Consumer that will call methods on CreateContactRequest.Builder to create a request.

Returns:

Result of the CreateContact operation returned by the service.

See Also:

• AWS API Documentation

createContactList

default CreateContactListResponse createContactList(CreateContactListRequest createContactListRequest)
                                             throws BadRequestException,
TooManyRequestsException,
AlreadyExistsException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a contact list.

Parameters:

createContactListRequest -

Returns:

Result of the CreateContactList operation returned by the service.

See Also:

• AWS API Documentation

createContactList

default CreateContactListResponse createContactList(Consumer<CreateContactListRequest.Builder> createContactListRequest)
                                             throws BadRequestException,
TooManyRequestsException,
AlreadyExistsException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a contact list.

This is a convenience which creates an instance of the CreateContactListRequest.Builder avoiding the need to create one manually via CreateContactListRequest.builder()

Parameters:

createContactListRequest - A Consumer that will call methods on CreateContactListRequest.Builder to create a request.

Returns:

Result of the CreateContactList operation returned by the service.

See Also:

• AWS API Documentation

createCustomVerificationEmailTemplate

default CreateCustomVerificationEmailTemplateResponse createCustomVerificationEmailTemplate(CreateCustomVerificationEmailTemplateRequest createCustomVerificationEmailTemplateRequest)
                                                                                     throws BadRequestException,
AlreadyExistsException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a new custom verification email template.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

createCustomVerificationEmailTemplateRequest - Represents a request to create a custom verification email template.

Returns:

Result of the CreateCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

createCustomVerificationEmailTemplate

default CreateCustomVerificationEmailTemplateResponse createCustomVerificationEmailTemplate(Consumer<CreateCustomVerificationEmailTemplateRequest.Builder> createCustomVerificationEmailTemplateRequest)
                                                                                     throws BadRequestException,
AlreadyExistsException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a new custom verification email template.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the CreateCustomVerificationEmailTemplateRequest.Builder avoiding the need to create one manually via CreateCustomVerificationEmailTemplateRequest.builder()

Parameters:

createCustomVerificationEmailTemplateRequest - A Consumer that will call methods on CreateCustomVerificationEmailTemplateRequest.Builder to create a request. Represents a request to create a custom verification email template.

Returns:

Result of the CreateCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

createDedicatedIpPool

default CreateDedicatedIpPoolResponse createDedicatedIpPool(CreateDedicatedIpPoolRequest createDedicatedIpPoolRequest)
                                                     throws AlreadyExistsException,
LimitExceededException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create a new pool of dedicated IP addresses. A pool can include one or more dedicated IP addresses that are associated with your Amazon Web Services account. You can associate a pool with a configuration set. When you send an email that uses that configuration set, the message is sent from one of the addresses in the associated pool.

Parameters:

createDedicatedIpPoolRequest - A request to create a new dedicated IP pool.

Returns:

Result of the CreateDedicatedIpPool operation returned by the service.

See Also:

• AWS API Documentation

createDedicatedIpPool

default CreateDedicatedIpPoolResponse createDedicatedIpPool(Consumer<CreateDedicatedIpPoolRequest.Builder> createDedicatedIpPoolRequest)
                                                     throws AlreadyExistsException,
LimitExceededException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create a new pool of dedicated IP addresses. A pool can include one or more dedicated IP addresses that are associated with your Amazon Web Services account. You can associate a pool with a configuration set. When you send an email that uses that configuration set, the message is sent from one of the addresses in the associated pool.

This is a convenience which creates an instance of the CreateDedicatedIpPoolRequest.Builder avoiding the need to create one manually via CreateDedicatedIpPoolRequest.builder()

Parameters:

createDedicatedIpPoolRequest - A Consumer that will call methods on CreateDedicatedIpPoolRequest.Builder to create a request. A request to create a new dedicated IP pool.

Returns:

Result of the CreateDedicatedIpPool operation returned by the service.

See Also:

• AWS API Documentation

createDeliverabilityTestReport

default CreateDeliverabilityTestReportResponse createDeliverabilityTestReport(CreateDeliverabilityTestReportRequest createDeliverabilityTestReportRequest)
                                                                       throws AccountSuspendedException,
SendingPausedException,
MessageRejectedException,
MailFromDomainNotVerifiedException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create a new predictive inbox placement test. Predictive inbox placement tests can help you predict how your messages will be handled by various email providers around the world. When you perform a predictive inbox placement test, you provide a sample message that contains the content that you plan to send to your customers. Amazon SES then sends that message to special email addresses spread across several major email providers. After about 24 hours, the test is complete, and you can use the GetDeliverabilityTestReport operation to view the results of the test.

Parameters:

createDeliverabilityTestReportRequest - A request to perform a predictive inbox placement test. Predictive inbox placement tests can help you predict how your messages will be handled by various email providers around the world. When you perform a predictive inbox placement test, you provide a sample message that contains the content that you plan to send to your customers. We send that message to special email addresses spread across several major email providers around the world. The test takes about 24 hours to complete. When the test is complete, you can use the GetDeliverabilityTestReport operation to view the results of the test.

Returns:

Result of the CreateDeliverabilityTestReport operation returned by the service.

See Also:

• AWS API Documentation

createDeliverabilityTestReport

default CreateDeliverabilityTestReportResponse createDeliverabilityTestReport(Consumer<CreateDeliverabilityTestReportRequest.Builder> createDeliverabilityTestReportRequest)
                                                                       throws AccountSuspendedException,
SendingPausedException,
MessageRejectedException,
MailFromDomainNotVerifiedException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Create a new predictive inbox placement test. Predictive inbox placement tests can help you predict how your messages will be handled by various email providers around the world. When you perform a predictive inbox placement test, you provide a sample message that contains the content that you plan to send to your customers. Amazon SES then sends that message to special email addresses spread across several major email providers. After about 24 hours, the test is complete, and you can use the GetDeliverabilityTestReport operation to view the results of the test.

This is a convenience which creates an instance of the CreateDeliverabilityTestReportRequest.Builder avoiding the need to create one manually via CreateDeliverabilityTestReportRequest.builder()

Parameters:

createDeliverabilityTestReportRequest - A Consumer that will call methods on CreateDeliverabilityTestReportRequest.Builder to create a request. A request to perform a predictive inbox placement test. Predictive inbox placement tests can help you predict how your messages will be handled by various email providers around the world. When you perform a predictive inbox placement test, you provide a sample message that contains the content that you plan to send to your customers. We send that message to special email addresses spread across several major email providers around the world. The test takes about 24 hours to complete. When the test is complete, you can use the GetDeliverabilityTestReport operation to view the results of the test.

Returns:

Result of the CreateDeliverabilityTestReport operation returned by the service.

See Also:

• AWS API Documentation

createEmailIdentity

default CreateEmailIdentityResponse createEmailIdentity(CreateEmailIdentityRequest createEmailIdentityRequest)
                                                 throws AlreadyExistsException,
LimitExceededException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Starts the process of verifying an email identity. An identity is an email address or domain that you use when you send email. Before you can use an identity to send email, you first have to verify it. By verifying an identity, you demonstrate that you're the owner of the identity, and that you've given Amazon SES API v2 permission to send email from the identity.

When you verify an email address, Amazon SES sends an email to the address. Your email address is verified as soon as you follow the link in the verification email.

When you verify a domain without specifying the DkimSigningAttributes object, this operation provides a set of DKIM tokens. You can convert these tokens into CNAME records, which you then add to the DNS configuration for your domain. Your domain is verified when Amazon SES detects these records in the DNS configuration for your domain. This verification method is known as Easy DKIM.

Alternatively, you can perform the verification process by providing your own public-private key pair. This verification method is known as Bring Your Own DKIM (BYODKIM). To use BYODKIM, your call to the CreateEmailIdentity operation has to include the DkimSigningAttributes object. When you specify this object, you provide a selector (a component of the DNS record name that identifies the public key to use for DKIM authentication) and a private key.

When you verify a domain, this operation provides a set of DKIM tokens, which you can convert into CNAME tokens. You add these CNAME tokens to the DNS configuration for your domain. Your domain is verified when Amazon SES detects these records in the DNS configuration for your domain. For some DNS providers, it can take 72 hours or more to complete the domain verification process.

Additionally, you can associate an existing configuration set with the email identity that you're verifying.

Parameters:

createEmailIdentityRequest - A request to begin the verification process for an email identity (an email address or domain).

Returns:

Result of the CreateEmailIdentity operation returned by the service.

See Also:

• AWS API Documentation

createEmailIdentity

default CreateEmailIdentityResponse createEmailIdentity(Consumer<CreateEmailIdentityRequest.Builder> createEmailIdentityRequest)
                                                 throws AlreadyExistsException,
LimitExceededException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Starts the process of verifying an email identity. An identity is an email address or domain that you use when you send email. Before you can use an identity to send email, you first have to verify it. By verifying an identity, you demonstrate that you're the owner of the identity, and that you've given Amazon SES API v2 permission to send email from the identity.

When you verify an email address, Amazon SES sends an email to the address. Your email address is verified as soon as you follow the link in the verification email.

When you verify a domain without specifying the DkimSigningAttributes object, this operation provides a set of DKIM tokens. You can convert these tokens into CNAME records, which you then add to the DNS configuration for your domain. Your domain is verified when Amazon SES detects these records in the DNS configuration for your domain. This verification method is known as Easy DKIM.

Alternatively, you can perform the verification process by providing your own public-private key pair. This verification method is known as Bring Your Own DKIM (BYODKIM). To use BYODKIM, your call to the CreateEmailIdentity operation has to include the DkimSigningAttributes object. When you specify this object, you provide a selector (a component of the DNS record name that identifies the public key to use for DKIM authentication) and a private key.

When you verify a domain, this operation provides a set of DKIM tokens, which you can convert into CNAME tokens. You add these CNAME tokens to the DNS configuration for your domain. Your domain is verified when Amazon SES detects these records in the DNS configuration for your domain. For some DNS providers, it can take 72 hours or more to complete the domain verification process.

Additionally, you can associate an existing configuration set with the email identity that you're verifying.

This is a convenience which creates an instance of the CreateEmailIdentityRequest.Builder avoiding the need to create one manually via CreateEmailIdentityRequest.builder()

Parameters:

createEmailIdentityRequest - A Consumer that will call methods on CreateEmailIdentityRequest.Builder to create a request. A request to begin the verification process for an email identity (an email address or domain).

Returns:

Result of the CreateEmailIdentity operation returned by the service.

See Also:

• AWS API Documentation

createEmailIdentityPolicy

default CreateEmailIdentityPolicyResponse createEmailIdentityPolicy(CreateEmailIdentityPolicyRequest createEmailIdentityPolicyRequest)
                                                             throws NotFoundException,
AlreadyExistsException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates the specified sending authorization policy for the given identity (an email address or a domain).

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

createEmailIdentityPolicyRequest - Represents a request to create a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Returns:

Result of the CreateEmailIdentityPolicy operation returned by the service.

See Also:

• AWS API Documentation

createEmailIdentityPolicy

default CreateEmailIdentityPolicyResponse createEmailIdentityPolicy(Consumer<CreateEmailIdentityPolicyRequest.Builder> createEmailIdentityPolicyRequest)
                                                             throws NotFoundException,
AlreadyExistsException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates the specified sending authorization policy for the given identity (an email address or a domain).

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the CreateEmailIdentityPolicyRequest.Builder avoiding the need to create one manually via CreateEmailIdentityPolicyRequest.builder()

Parameters:

createEmailIdentityPolicyRequest - A Consumer that will call methods on CreateEmailIdentityPolicyRequest.Builder to create a request. Represents a request to create a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Returns:

Result of the CreateEmailIdentityPolicy operation returned by the service.

See Also:

• AWS API Documentation

createEmailTemplate

default CreateEmailTemplateResponse createEmailTemplate(CreateEmailTemplateRequest createEmailTemplateRequest)
                                                 throws AlreadyExistsException,
TooManyRequestsException,
BadRequestException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

createEmailTemplateRequest - Represents a request to create an email template. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the CreateEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

createEmailTemplate

default CreateEmailTemplateResponse createEmailTemplate(Consumer<CreateEmailTemplateRequest.Builder> createEmailTemplateRequest)
                                                 throws AlreadyExistsException,
TooManyRequestsException,
BadRequestException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the CreateEmailTemplateRequest.Builder avoiding the need to create one manually via CreateEmailTemplateRequest.builder()

Parameters:

createEmailTemplateRequest - A Consumer that will call methods on CreateEmailTemplateRequest.Builder to create a request. Represents a request to create an email template. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the CreateEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

createExportJob

default CreateExportJobResponse createExportJob(CreateExportJobRequest createExportJobRequest)
                                         throws BadRequestException,
TooManyRequestsException,
NotFoundException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates an export job for a data source and destination.

You can execute this operation no more than once per second.

Parameters:

createExportJobRequest - Represents a request to create an export job from a data source to a data destination.

Returns:

Result of the CreateExportJob operation returned by the service.

See Also:

• AWS API Documentation

createExportJob

default CreateExportJobResponse createExportJob(Consumer<CreateExportJobRequest.Builder> createExportJobRequest)
                                         throws BadRequestException,
TooManyRequestsException,
NotFoundException,
LimitExceededException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates an export job for a data source and destination.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the CreateExportJobRequest.Builder avoiding the need to create one manually via CreateExportJobRequest.builder()

Parameters:

createExportJobRequest - A Consumer that will call methods on CreateExportJobRequest.Builder to create a request. Represents a request to create an export job from a data source to a data destination.

Returns:

Result of the CreateExportJob operation returned by the service.

See Also:

• AWS API Documentation

createImportJob

default CreateImportJobResponse createImportJob(CreateImportJobRequest createImportJobRequest)
                                         throws BadRequestException,
LimitExceededException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates an import job for a data destination.

Parameters:

createImportJobRequest - Represents a request to create an import job from a data source for a data destination.

Returns:

Result of the CreateImportJob operation returned by the service.

See Also:

• AWS API Documentation

createImportJob

default CreateImportJobResponse createImportJob(Consumer<CreateImportJobRequest.Builder> createImportJobRequest)
                                         throws BadRequestException,
LimitExceededException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates an import job for a data destination.

This is a convenience which creates an instance of the CreateImportJobRequest.Builder avoiding the need to create one manually via CreateImportJobRequest.builder()

Parameters:

createImportJobRequest - A Consumer that will call methods on CreateImportJobRequest.Builder to create a request. Represents a request to create an import job from a data source for a data destination.

Returns:

Result of the CreateImportJob operation returned by the service.

See Also:

• AWS API Documentation

deleteConfigurationSet

default DeleteConfigurationSetResponse deleteConfigurationSet(DeleteConfigurationSetRequest deleteConfigurationSetRequest)
                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Delete an existing configuration set.

Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

Parameters:

deleteConfigurationSetRequest - A request to delete a configuration set.

Returns:

Result of the DeleteConfigurationSet operation returned by the service.

See Also:

• AWS API Documentation

deleteConfigurationSet

default DeleteConfigurationSetResponse deleteConfigurationSet(Consumer<DeleteConfigurationSetRequest.Builder> deleteConfigurationSetRequest)
                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Delete an existing configuration set.

Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

This is a convenience which creates an instance of the DeleteConfigurationSetRequest.Builder avoiding the need to create one manually via DeleteConfigurationSetRequest.builder()

Parameters:

deleteConfigurationSetRequest - A Consumer that will call methods on DeleteConfigurationSetRequest.Builder to create a request. A request to delete a configuration set.

Returns:

Result of the DeleteConfigurationSet operation returned by the service.

See Also:

• AWS API Documentation

deleteConfigurationSetEventDestination

default DeleteConfigurationSetEventDestinationResponse deleteConfigurationSetEventDestination(DeleteConfigurationSetEventDestinationRequest deleteConfigurationSetEventDestinationRequest)
                                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Delete an event destination.

Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

Parameters:

deleteConfigurationSetEventDestinationRequest - A request to delete an event destination from a configuration set.

Returns:

Result of the DeleteConfigurationSetEventDestination operation returned by the service.

See Also:

• AWS API Documentation

deleteConfigurationSetEventDestination

default DeleteConfigurationSetEventDestinationResponse deleteConfigurationSetEventDestination(Consumer<DeleteConfigurationSetEventDestinationRequest.Builder> deleteConfigurationSetEventDestinationRequest)
                                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Delete an event destination.

Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

This is a convenience which creates an instance of the DeleteConfigurationSetEventDestinationRequest.Builder avoiding the need to create one manually via DeleteConfigurationSetEventDestinationRequest.builder()

Parameters:

deleteConfigurationSetEventDestinationRequest - A Consumer that will call methods on DeleteConfigurationSetEventDestinationRequest.Builder to create a request. A request to delete an event destination from a configuration set.

Returns:

Result of the DeleteConfigurationSetEventDestination operation returned by the service.

See Also:

• AWS API Documentation

deleteContact

default DeleteContactResponse deleteContact(DeleteContactRequest deleteContactRequest)
                                     throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Removes a contact from a contact list.

Parameters:

deleteContactRequest -

Returns:

Result of the DeleteContact operation returned by the service.

See Also:

• AWS API Documentation

deleteContact

default DeleteContactResponse deleteContact(Consumer<DeleteContactRequest.Builder> deleteContactRequest)
                                     throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Removes a contact from a contact list.

This is a convenience which creates an instance of the DeleteContactRequest.Builder avoiding the need to create one manually via DeleteContactRequest.builder()

Parameters:

deleteContactRequest - A Consumer that will call methods on DeleteContactRequest.Builder to create a request.

Returns:

Result of the DeleteContact operation returned by the service.

See Also:

• AWS API Documentation

deleteContactList

default DeleteContactListResponse deleteContactList(DeleteContactListRequest deleteContactListRequest)
                                             throws TooManyRequestsException,
NotFoundException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes a contact list and all of the contacts on that list.

Parameters:

deleteContactListRequest -

Returns:

Result of the DeleteContactList operation returned by the service.

See Also:

• AWS API Documentation

deleteContactList

default DeleteContactListResponse deleteContactList(Consumer<DeleteContactListRequest.Builder> deleteContactListRequest)
                                             throws TooManyRequestsException,
NotFoundException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes a contact list and all of the contacts on that list.

This is a convenience which creates an instance of the DeleteContactListRequest.Builder avoiding the need to create one manually via DeleteContactListRequest.builder()

Parameters:

deleteContactListRequest - A Consumer that will call methods on DeleteContactListRequest.Builder to create a request.

Returns:

Result of the DeleteContactList operation returned by the service.

See Also:

• AWS API Documentation

deleteCustomVerificationEmailTemplate

default DeleteCustomVerificationEmailTemplateResponse deleteCustomVerificationEmailTemplate(DeleteCustomVerificationEmailTemplateRequest deleteCustomVerificationEmailTemplateRequest)
                                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes an existing custom verification email template.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

deleteCustomVerificationEmailTemplateRequest - Represents a request to delete an existing custom verification email template.

Returns:

Result of the DeleteCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

deleteCustomVerificationEmailTemplate

default DeleteCustomVerificationEmailTemplateResponse deleteCustomVerificationEmailTemplate(Consumer<DeleteCustomVerificationEmailTemplateRequest.Builder> deleteCustomVerificationEmailTemplateRequest)
                                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes an existing custom verification email template.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the DeleteCustomVerificationEmailTemplateRequest.Builder avoiding the need to create one manually via DeleteCustomVerificationEmailTemplateRequest.builder()

Parameters:

deleteCustomVerificationEmailTemplateRequest - A Consumer that will call methods on DeleteCustomVerificationEmailTemplateRequest.Builder to create a request. Represents a request to delete an existing custom verification email template.

Returns:

Result of the DeleteCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

deleteDedicatedIpPool

default DeleteDedicatedIpPoolResponse deleteDedicatedIpPool(DeleteDedicatedIpPoolRequest deleteDedicatedIpPoolRequest)
                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Delete a dedicated IP pool.

Parameters:

deleteDedicatedIpPoolRequest - A request to delete a dedicated IP pool.

Returns:

Result of the DeleteDedicatedIpPool operation returned by the service.

See Also:

• AWS API Documentation

deleteDedicatedIpPool

default DeleteDedicatedIpPoolResponse deleteDedicatedIpPool(Consumer<DeleteDedicatedIpPoolRequest.Builder> deleteDedicatedIpPoolRequest)
                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Delete a dedicated IP pool.

This is a convenience which creates an instance of the DeleteDedicatedIpPoolRequest.Builder avoiding the need to create one manually via DeleteDedicatedIpPoolRequest.builder()

Parameters:

deleteDedicatedIpPoolRequest - A Consumer that will call methods on DeleteDedicatedIpPoolRequest.Builder to create a request. A request to delete a dedicated IP pool.

Returns:

Result of the DeleteDedicatedIpPool operation returned by the service.

See Also:

• AWS API Documentation

deleteEmailIdentity

default DeleteEmailIdentityResponse deleteEmailIdentity(DeleteEmailIdentityRequest deleteEmailIdentityRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes an email identity. An identity can be either an email address or a domain name.

Parameters:

deleteEmailIdentityRequest - A request to delete an existing email identity. When you delete an identity, you lose the ability to send email from that identity. You can restore your ability to send email by completing the verification process for the identity again.

Returns:

Result of the DeleteEmailIdentity operation returned by the service.

See Also:

• AWS API Documentation

deleteEmailIdentity

default DeleteEmailIdentityResponse deleteEmailIdentity(Consumer<DeleteEmailIdentityRequest.Builder> deleteEmailIdentityRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes an email identity. An identity can be either an email address or a domain name.

This is a convenience which creates an instance of the DeleteEmailIdentityRequest.Builder avoiding the need to create one manually via DeleteEmailIdentityRequest.builder()

Parameters:

deleteEmailIdentityRequest - A Consumer that will call methods on DeleteEmailIdentityRequest.Builder to create a request. A request to delete an existing email identity. When you delete an identity, you lose the ability to send email from that identity. You can restore your ability to send email by completing the verification process for the identity again.

Returns:

Result of the DeleteEmailIdentity operation returned by the service.

See Also:

• AWS API Documentation

deleteEmailIdentityPolicy

default DeleteEmailIdentityPolicyResponse deleteEmailIdentityPolicy(DeleteEmailIdentityPolicyRequest deleteEmailIdentityPolicyRequest)
                                                             throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

deleteEmailIdentityPolicyRequest - Represents a request to delete a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Returns:

Result of the DeleteEmailIdentityPolicy operation returned by the service.

See Also:

• AWS API Documentation

deleteEmailIdentityPolicy

default DeleteEmailIdentityPolicyResponse deleteEmailIdentityPolicy(Consumer<DeleteEmailIdentityPolicyRequest.Builder> deleteEmailIdentityPolicyRequest)
                                                             throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the DeleteEmailIdentityPolicyRequest.Builder avoiding the need to create one manually via DeleteEmailIdentityPolicyRequest.builder()

Parameters:

deleteEmailIdentityPolicyRequest - A Consumer that will call methods on DeleteEmailIdentityPolicyRequest.Builder to create a request. Represents a request to delete a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Returns:

Result of the DeleteEmailIdentityPolicy operation returned by the service.

See Also:

• AWS API Documentation

deleteEmailTemplate

default DeleteEmailTemplateResponse deleteEmailTemplate(DeleteEmailTemplateRequest deleteEmailTemplateRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes an email template.

You can execute this operation no more than once per second.

Parameters:

deleteEmailTemplateRequest - Represents a request to delete an email template. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the DeleteEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

deleteEmailTemplate

default DeleteEmailTemplateResponse deleteEmailTemplate(Consumer<DeleteEmailTemplateRequest.Builder> deleteEmailTemplateRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Deletes an email template.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the DeleteEmailTemplateRequest.Builder avoiding the need to create one manually via DeleteEmailTemplateRequest.builder()

Parameters:

deleteEmailTemplateRequest - A Consumer that will call methods on DeleteEmailTemplateRequest.Builder to create a request. Represents a request to delete an email template. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the DeleteEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

deleteSuppressedDestination

default DeleteSuppressedDestinationResponse deleteSuppressedDestination(DeleteSuppressedDestinationRequest deleteSuppressedDestinationRequest)
                                                                 throws NotFoundException,
BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Removes an email address from the suppression list for your account.

Parameters:

deleteSuppressedDestinationRequest - A request to remove an email address from the suppression list for your account.

Returns:

Result of the DeleteSuppressedDestination operation returned by the service.

See Also:

• AWS API Documentation

deleteSuppressedDestination

default DeleteSuppressedDestinationResponse deleteSuppressedDestination(Consumer<DeleteSuppressedDestinationRequest.Builder> deleteSuppressedDestinationRequest)
                                                                 throws NotFoundException,
BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Removes an email address from the suppression list for your account.

This is a convenience which creates an instance of the DeleteSuppressedDestinationRequest.Builder avoiding the need to create one manually via DeleteSuppressedDestinationRequest.builder()

Parameters:

deleteSuppressedDestinationRequest - A Consumer that will call methods on DeleteSuppressedDestinationRequest.Builder to create a request. A request to remove an email address from the suppression list for your account.

Returns:

Result of the DeleteSuppressedDestination operation returned by the service.

See Also:

• AWS API Documentation

getAccount

default GetAccountResponse getAccount(GetAccountRequest getAccountRequest)
                               throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Obtain information about the email-sending status and capabilities of your Amazon SES account in the current Amazon Web Services Region.

Parameters:

getAccountRequest - A request to obtain information about the email-sending capabilities of your Amazon SES account.

Returns:

Result of the GetAccount operation returned by the service.

See Also:

• AWS API Documentation

getAccount

default GetAccountResponse getAccount(Consumer<GetAccountRequest.Builder> getAccountRequest)
                               throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Obtain information about the email-sending status and capabilities of your Amazon SES account in the current Amazon Web Services Region.

This is a convenience which creates an instance of the GetAccountRequest.Builder avoiding the need to create one manually via GetAccountRequest.builder()

Parameters:

getAccountRequest - A Consumer that will call methods on GetAccountRequest.Builder to create a request. A request to obtain information about the email-sending capabilities of your Amazon SES account.

Returns:

Result of the GetAccount operation returned by the service.

See Also:

• AWS API Documentation

getBlacklistReports

default GetBlacklistReportsResponse getBlacklistReports(GetBlacklistReportsRequest getBlacklistReportsRequest)
                                                 throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve a list of the blacklists that your dedicated IP addresses appear on.

Parameters:

getBlacklistReportsRequest - A request to retrieve a list of the blacklists that your dedicated IP addresses appear on.

Returns:

Result of the GetBlacklistReports operation returned by the service.

See Also:

• AWS API Documentation

getBlacklistReports

default GetBlacklistReportsResponse getBlacklistReports(Consumer<GetBlacklistReportsRequest.Builder> getBlacklistReportsRequest)
                                                 throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve a list of the blacklists that your dedicated IP addresses appear on.

This is a convenience which creates an instance of the GetBlacklistReportsRequest.Builder avoiding the need to create one manually via GetBlacklistReportsRequest.builder()

Parameters:

getBlacklistReportsRequest - A Consumer that will call methods on GetBlacklistReportsRequest.Builder to create a request. A request to retrieve a list of the blacklists that your dedicated IP addresses appear on.

Returns:

Result of the GetBlacklistReports operation returned by the service.

See Also:

• AWS API Documentation

getConfigurationSet

default GetConfigurationSetResponse getConfigurationSet(GetConfigurationSetRequest getConfigurationSetRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Get information about an existing configuration set, including the dedicated IP pool that it's associated with, whether or not it's enabled for sending email, and more.

Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

Parameters:

getConfigurationSetRequest - A request to obtain information about a configuration set.

Returns:

Result of the GetConfigurationSet operation returned by the service.

See Also:

• AWS API Documentation

getConfigurationSet

default GetConfigurationSetResponse getConfigurationSet(Consumer<GetConfigurationSetRequest.Builder> getConfigurationSetRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Get information about an existing configuration set, including the dedicated IP pool that it's associated with, whether or not it's enabled for sending email, and more.

Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

This is a convenience which creates an instance of the GetConfigurationSetRequest.Builder avoiding the need to create one manually via GetConfigurationSetRequest.builder()

Parameters:

getConfigurationSetRequest - A Consumer that will call methods on GetConfigurationSetRequest.Builder to create a request. A request to obtain information about a configuration set.

Returns:

Result of the GetConfigurationSet operation returned by the service.

See Also:

• AWS API Documentation

getConfigurationSetEventDestinations

default GetConfigurationSetEventDestinationsResponse getConfigurationSetEventDestinations(GetConfigurationSetEventDestinationsRequest getConfigurationSetEventDestinationsRequest)
                                                                                   throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve a list of event destinations that are associated with a configuration set.

Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

Parameters:

getConfigurationSetEventDestinationsRequest - A request to obtain information about the event destinations for a configuration set.

Returns:

Result of the GetConfigurationSetEventDestinations operation returned by the service.

See Also:

• AWS API Documentation

getConfigurationSetEventDestinations

default GetConfigurationSetEventDestinationsResponse getConfigurationSetEventDestinations(Consumer<GetConfigurationSetEventDestinationsRequest.Builder> getConfigurationSetEventDestinationsRequest)
                                                                                   throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve a list of event destinations that are associated with a configuration set.

Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

This is a convenience which creates an instance of the GetConfigurationSetEventDestinationsRequest.Builder avoiding the need to create one manually via GetConfigurationSetEventDestinationsRequest.builder()

Parameters:

getConfigurationSetEventDestinationsRequest - A Consumer that will call methods on GetConfigurationSetEventDestinationsRequest.Builder to create a request. A request to obtain information about the event destinations for a configuration set.

Returns:

Result of the GetConfigurationSetEventDestinations operation returned by the service.

See Also:

• AWS API Documentation

getContact

default GetContactResponse getContact(GetContactRequest getContactRequest)
                               throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns a contact from a contact list.

Parameters:

getContactRequest -

Returns:

Result of the GetContact operation returned by the service.

See Also:

• AWS API Documentation

getContact

default GetContactResponse getContact(Consumer<GetContactRequest.Builder> getContactRequest)
                               throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns a contact from a contact list.

This is a convenience which creates an instance of the GetContactRequest.Builder avoiding the need to create one manually via GetContactRequest.builder()

Parameters:

getContactRequest - A Consumer that will call methods on GetContactRequest.Builder to create a request.

Returns:

Result of the GetContact operation returned by the service.

See Also:

• AWS API Documentation

getContactList

default GetContactListResponse getContactList(GetContactListRequest getContactListRequest)
                                       throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns contact list metadata. It does not return any information about the contacts present in the list.

Parameters:

getContactListRequest -

Returns:

Result of the GetContactList operation returned by the service.

See Also:

• AWS API Documentation

getContactList

default GetContactListResponse getContactList(Consumer<GetContactListRequest.Builder> getContactListRequest)
                                       throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns contact list metadata. It does not return any information about the contacts present in the list.

This is a convenience which creates an instance of the GetContactListRequest.Builder avoiding the need to create one manually via GetContactListRequest.builder()

Parameters:

getContactListRequest - A Consumer that will call methods on GetContactListRequest.Builder to create a request.

Returns:

Result of the GetContactList operation returned by the service.

See Also:

• AWS API Documentation

getCustomVerificationEmailTemplate

default GetCustomVerificationEmailTemplateResponse getCustomVerificationEmailTemplate(GetCustomVerificationEmailTemplateRequest getCustomVerificationEmailTemplateRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns the custom email verification template for the template name you specify.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

getCustomVerificationEmailTemplateRequest - Represents a request to retrieve an existing custom verification email template.

Returns:

Result of the GetCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

getCustomVerificationEmailTemplate

default GetCustomVerificationEmailTemplateResponse getCustomVerificationEmailTemplate(Consumer<GetCustomVerificationEmailTemplateRequest.Builder> getCustomVerificationEmailTemplateRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns the custom email verification template for the template name you specify.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the GetCustomVerificationEmailTemplateRequest.Builder avoiding the need to create one manually via GetCustomVerificationEmailTemplateRequest.builder()

Parameters:

getCustomVerificationEmailTemplateRequest - A Consumer that will call methods on GetCustomVerificationEmailTemplateRequest.Builder to create a request. Represents a request to retrieve an existing custom verification email template.

Returns:

Result of the GetCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

getDedicatedIp

default GetDedicatedIpResponse getDedicatedIp(GetDedicatedIpRequest getDedicatedIpRequest)
                                       throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Get information about a dedicated IP address, including the name of the dedicated IP pool that it's associated with, as well information about the automatic warm-up process for the address.

Parameters:

getDedicatedIpRequest - A request to obtain more information about a dedicated IP address.

Returns:

Result of the GetDedicatedIp operation returned by the service.

See Also:

• AWS API Documentation

getDedicatedIp

default GetDedicatedIpResponse getDedicatedIp(Consumer<GetDedicatedIpRequest.Builder> getDedicatedIpRequest)
                                       throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Get information about a dedicated IP address, including the name of the dedicated IP pool that it's associated with, as well information about the automatic warm-up process for the address.

This is a convenience which creates an instance of the GetDedicatedIpRequest.Builder avoiding the need to create one manually via GetDedicatedIpRequest.builder()

Parameters:

getDedicatedIpRequest - A Consumer that will call methods on GetDedicatedIpRequest.Builder to create a request. A request to obtain more information about a dedicated IP address.

Returns:

Result of the GetDedicatedIp operation returned by the service.

See Also:

• AWS API Documentation

getDedicatedIpPool

default GetDedicatedIpPoolResponse getDedicatedIpPool(GetDedicatedIpPoolRequest getDedicatedIpPoolRequest)
                                               throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve information about the dedicated pool.

Parameters:

getDedicatedIpPoolRequest - A request to obtain more information about a dedicated IP pool.

Returns:

Result of the GetDedicatedIpPool operation returned by the service.

See Also:

• AWS API Documentation

getDedicatedIpPool

default GetDedicatedIpPoolResponse getDedicatedIpPool(Consumer<GetDedicatedIpPoolRequest.Builder> getDedicatedIpPoolRequest)
                                               throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve information about the dedicated pool.

This is a convenience which creates an instance of the GetDedicatedIpPoolRequest.Builder avoiding the need to create one manually via GetDedicatedIpPoolRequest.builder()

Parameters:

getDedicatedIpPoolRequest - A Consumer that will call methods on GetDedicatedIpPoolRequest.Builder to create a request. A request to obtain more information about a dedicated IP pool.

Returns:

Result of the GetDedicatedIpPool operation returned by the service.

See Also:

• AWS API Documentation

getDedicatedIps

default GetDedicatedIpsResponse getDedicatedIps(GetDedicatedIpsRequest getDedicatedIpsRequest)
                                         throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

List the dedicated IP addresses that are associated with your Amazon Web Services account.

Parameters:

getDedicatedIpsRequest - A request to obtain more information about dedicated IP pools.

Returns:

Result of the GetDedicatedIps operation returned by the service.

See Also:

• AWS API Documentation

getDedicatedIps

default GetDedicatedIpsResponse getDedicatedIps(Consumer<GetDedicatedIpsRequest.Builder> getDedicatedIpsRequest)
                                         throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

List the dedicated IP addresses that are associated with your Amazon Web Services account.

This is a convenience which creates an instance of the GetDedicatedIpsRequest.Builder avoiding the need to create one manually via GetDedicatedIpsRequest.builder()

Parameters:

getDedicatedIpsRequest - A Consumer that will call methods on GetDedicatedIpsRequest.Builder to create a request. A request to obtain more information about dedicated IP pools.

Returns:

Result of the GetDedicatedIps operation returned by the service.

See Also:

• AWS API Documentation

getDedicatedIpsPaginator

default GetDedicatedIpsIterable getDedicatedIpsPaginator(GetDedicatedIpsRequest getDedicatedIpsRequest)
                                                  throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of getDedicatedIps(software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.GetDedicatedIpsIterable responses = client.getDedicatedIpsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.GetDedicatedIpsIterable responses = client.getDedicatedIpsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.GetDedicatedIpsIterable responses = client.getDedicatedIpsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the getDedicatedIps(software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsRequest) operation.

Parameters:

getDedicatedIpsRequest - A request to obtain more information about dedicated IP pools.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

getDedicatedIpsPaginator

default GetDedicatedIpsIterable getDedicatedIpsPaginator(Consumer<GetDedicatedIpsRequest.Builder> getDedicatedIpsRequest)
                                                  throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of getDedicatedIps(software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.GetDedicatedIpsIterable responses = client.getDedicatedIpsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.GetDedicatedIpsIterable responses = client.getDedicatedIpsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.GetDedicatedIpsIterable responses = client.getDedicatedIpsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the getDedicatedIps(software.amazon.awssdk.services.sesv2.model.GetDedicatedIpsRequest) operation.

This is a convenience which creates an instance of the GetDedicatedIpsRequest.Builder avoiding the need to create one manually via GetDedicatedIpsRequest.builder()

Parameters:

getDedicatedIpsRequest - A Consumer that will call methods on GetDedicatedIpsRequest.Builder to create a request. A request to obtain more information about dedicated IP pools.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

getDeliverabilityDashboardOptions

default GetDeliverabilityDashboardOptionsResponse getDeliverabilityDashboardOptions(GetDeliverabilityDashboardOptionsRequest getDeliverabilityDashboardOptionsRequest)
                                                                             throws TooManyRequestsException,
LimitExceededException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve information about the status of the Deliverability dashboard for your account. When the Deliverability dashboard is enabled, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon SES Pricing.

Parameters:

getDeliverabilityDashboardOptionsRequest - Retrieve information about the status of the Deliverability dashboard for your Amazon Web Services account. When the Deliverability dashboard is enabled, you gain access to reputation, deliverability, and other metrics for your domains. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.

Returns:

Result of the GetDeliverabilityDashboardOptions operation returned by the service.

See Also:

• AWS API Documentation

getDeliverabilityDashboardOptions

default GetDeliverabilityDashboardOptionsResponse getDeliverabilityDashboardOptions(Consumer<GetDeliverabilityDashboardOptionsRequest.Builder> getDeliverabilityDashboardOptionsRequest)
                                                                             throws TooManyRequestsException,
LimitExceededException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve information about the status of the Deliverability dashboard for your account. When the Deliverability dashboard is enabled, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon SES Pricing.

This is a convenience which creates an instance of the GetDeliverabilityDashboardOptionsRequest.Builder avoiding the need to create one manually via GetDeliverabilityDashboardOptionsRequest.builder()

Parameters:

getDeliverabilityDashboardOptionsRequest - A Consumer that will call methods on GetDeliverabilityDashboardOptionsRequest.Builder to create a request. Retrieve information about the status of the Deliverability dashboard for your Amazon Web Services account. When the Deliverability dashboard is enabled, you gain access to reputation, deliverability, and other metrics for your domains. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.

Returns:

Result of the GetDeliverabilityDashboardOptions operation returned by the service.

See Also:

• AWS API Documentation

getDeliverabilityTestReport

default GetDeliverabilityTestReportResponse getDeliverabilityTestReport(GetDeliverabilityTestReportRequest getDeliverabilityTestReportRequest)
                                                                 throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve the results of a predictive inbox placement test.

Parameters:

getDeliverabilityTestReportRequest - A request to retrieve the results of a predictive inbox placement test.

Returns:

Result of the GetDeliverabilityTestReport operation returned by the service.

See Also:

• AWS API Documentation

getDeliverabilityTestReport

default GetDeliverabilityTestReportResponse getDeliverabilityTestReport(Consumer<GetDeliverabilityTestReportRequest.Builder> getDeliverabilityTestReportRequest)
                                                                 throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve the results of a predictive inbox placement test.

This is a convenience which creates an instance of the GetDeliverabilityTestReportRequest.Builder avoiding the need to create one manually via GetDeliverabilityTestReportRequest.builder()

Parameters:

getDeliverabilityTestReportRequest - A Consumer that will call methods on GetDeliverabilityTestReportRequest.Builder to create a request. A request to retrieve the results of a predictive inbox placement test.

Returns:

Result of the GetDeliverabilityTestReport operation returned by the service.

See Also:

• AWS API Documentation

getDomainDeliverabilityCampaign

default GetDomainDeliverabilityCampaignResponse getDomainDeliverabilityCampaign(GetDomainDeliverabilityCampaignRequest getDomainDeliverabilityCampaignRequest)
                                                                         throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for.

Parameters:

getDomainDeliverabilityCampaignRequest - Retrieve all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for ( PutDeliverabilityDashboardOption operation).

Returns:

Result of the GetDomainDeliverabilityCampaign operation returned by the service.

See Also:

• AWS API Documentation

getDomainDeliverabilityCampaign

default GetDomainDeliverabilityCampaignResponse getDomainDeliverabilityCampaign(Consumer<GetDomainDeliverabilityCampaignRequest.Builder> getDomainDeliverabilityCampaignRequest)
                                                                         throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for.

This is a convenience which creates an instance of the GetDomainDeliverabilityCampaignRequest.Builder avoiding the need to create one manually via GetDomainDeliverabilityCampaignRequest.builder()

Parameters:

getDomainDeliverabilityCampaignRequest - A Consumer that will call methods on GetDomainDeliverabilityCampaignRequest.Builder to create a request. Retrieve all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for (PutDeliverabilityDashboardOption operation).

Returns:

Result of the GetDomainDeliverabilityCampaign operation returned by the service.

See Also:

• AWS API Documentation

getDomainStatisticsReport

default GetDomainStatisticsReportResponse getDomainStatisticsReport(GetDomainStatisticsReportRequest getDomainStatisticsReportRequest)
                                                             throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve inbox placement and engagement rates for the domains that you use to send email.

Parameters:

getDomainStatisticsReportRequest - A request to obtain deliverability metrics for a domain.

Returns:

Result of the GetDomainStatisticsReport operation returned by the service.

See Also:

• AWS API Documentation

getDomainStatisticsReport

default GetDomainStatisticsReportResponse getDomainStatisticsReport(Consumer<GetDomainStatisticsReportRequest.Builder> getDomainStatisticsReportRequest)
                                                             throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve inbox placement and engagement rates for the domains that you use to send email.

This is a convenience which creates an instance of the GetDomainStatisticsReportRequest.Builder avoiding the need to create one manually via GetDomainStatisticsReportRequest.builder()

Parameters:

getDomainStatisticsReportRequest - A Consumer that will call methods on GetDomainStatisticsReportRequest.Builder to create a request. A request to obtain deliverability metrics for a domain.

Returns:

Result of the GetDomainStatisticsReport operation returned by the service.

See Also:

• AWS API Documentation

getEmailIdentity

default GetEmailIdentityResponse getEmailIdentity(GetEmailIdentityRequest getEmailIdentityRequest)
                                           throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about a specific identity, including the identity's verification status, sending authorization policies, its DKIM authentication status, and its custom Mail-From settings.

Parameters:

getEmailIdentityRequest - A request to return details about an email identity.

Returns:

Result of the GetEmailIdentity operation returned by the service.

See Also:

• AWS API Documentation

getEmailIdentity

default GetEmailIdentityResponse getEmailIdentity(Consumer<GetEmailIdentityRequest.Builder> getEmailIdentityRequest)
                                           throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about a specific identity, including the identity's verification status, sending authorization policies, its DKIM authentication status, and its custom Mail-From settings.

This is a convenience which creates an instance of the GetEmailIdentityRequest.Builder avoiding the need to create one manually via GetEmailIdentityRequest.builder()

Parameters:

getEmailIdentityRequest - A Consumer that will call methods on GetEmailIdentityRequest.Builder to create a request. A request to return details about an email identity.

Returns:

Result of the GetEmailIdentity operation returned by the service.

See Also:

• AWS API Documentation

getEmailIdentityPolicies

default GetEmailIdentityPoliciesResponse getEmailIdentityPolicies(GetEmailIdentityPoliciesRequest getEmailIdentityPoliciesRequest)
                                                           throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

getEmailIdentityPoliciesRequest - A request to return the policies of an email identity.

Returns:

Result of the GetEmailIdentityPolicies operation returned by the service.

See Also:

• AWS API Documentation

getEmailIdentityPolicies

default GetEmailIdentityPoliciesResponse getEmailIdentityPolicies(Consumer<GetEmailIdentityPoliciesRequest.Builder> getEmailIdentityPoliciesRequest)
                                                           throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the GetEmailIdentityPoliciesRequest.Builder avoiding the need to create one manually via GetEmailIdentityPoliciesRequest.builder()

Parameters:

getEmailIdentityPoliciesRequest - A Consumer that will call methods on GetEmailIdentityPoliciesRequest.Builder to create a request. A request to return the policies of an email identity.

Returns:

Result of the GetEmailIdentityPolicies operation returned by the service.

See Also:

• AWS API Documentation

getEmailTemplate

default GetEmailTemplateResponse getEmailTemplate(GetEmailTemplateRequest getEmailTemplateRequest)
                                           throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Displays the template object (which includes the subject line, HTML part and text part) for the template you specify.

You can execute this operation no more than once per second.

Parameters:

getEmailTemplateRequest - Represents a request to display the template object (which includes the subject line, HTML part and text part) for the template you specify.

Returns:

Result of the GetEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

getEmailTemplate

default GetEmailTemplateResponse getEmailTemplate(Consumer<GetEmailTemplateRequest.Builder> getEmailTemplateRequest)
                                           throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Displays the template object (which includes the subject line, HTML part and text part) for the template you specify.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the GetEmailTemplateRequest.Builder avoiding the need to create one manually via GetEmailTemplateRequest.builder()

Parameters:

getEmailTemplateRequest - A Consumer that will call methods on GetEmailTemplateRequest.Builder to create a request. Represents a request to display the template object (which includes the subject line, HTML part and text part) for the template you specify.

Returns:

Result of the GetEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

getExportJob

default GetExportJobResponse getExportJob(GetExportJobRequest getExportJobRequest)
                                   throws BadRequestException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about an export job.

Parameters:

getExportJobRequest - Represents a request to retrieve information about an export job using the export job ID.

Returns:

Result of the GetExportJob operation returned by the service.

See Also:

• AWS API Documentation

getExportJob

default GetExportJobResponse getExportJob(Consumer<GetExportJobRequest.Builder> getExportJobRequest)
                                   throws BadRequestException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about an export job.

This is a convenience which creates an instance of the GetExportJobRequest.Builder avoiding the need to create one manually via GetExportJobRequest.builder()

Parameters:

getExportJobRequest - A Consumer that will call methods on GetExportJobRequest.Builder to create a request. Represents a request to retrieve information about an export job using the export job ID.

Returns:

Result of the GetExportJob operation returned by the service.

See Also:

• AWS API Documentation

getImportJob

default GetImportJobResponse getImportJob(GetImportJobRequest getImportJobRequest)
                                   throws BadRequestException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about an import job.

Parameters:

getImportJobRequest - Represents a request for information about an import job using the import job ID.

Returns:

Result of the GetImportJob operation returned by the service.

See Also:

• AWS API Documentation

getImportJob

default GetImportJobResponse getImportJob(Consumer<GetImportJobRequest.Builder> getImportJobRequest)
                                   throws BadRequestException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about an import job.

This is a convenience which creates an instance of the GetImportJobRequest.Builder avoiding the need to create one manually via GetImportJobRequest.builder()

Parameters:

getImportJobRequest - A Consumer that will call methods on GetImportJobRequest.Builder to create a request. Represents a request for information about an import job using the import job ID.

Returns:

Result of the GetImportJob operation returned by the service.

See Also:

• AWS API Documentation

getMessageInsights

default GetMessageInsightsResponse getMessageInsights(GetMessageInsightsRequest getMessageInsightsRequest)
                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about a specific message, including the from address, the subject, the recipient address, email tags, as well as events associated with the message.

You can execute this operation no more than once per second.

Parameters:

getMessageInsightsRequest - A request to return information about a message.

Returns:

Result of the GetMessageInsights operation returned by the service.

See Also:

• AWS API Documentation

getMessageInsights

default GetMessageInsightsResponse getMessageInsights(Consumer<GetMessageInsightsRequest.Builder> getMessageInsightsRequest)
                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Provides information about a specific message, including the from address, the subject, the recipient address, email tags, as well as events associated with the message.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the GetMessageInsightsRequest.Builder avoiding the need to create one manually via GetMessageInsightsRequest.builder()

Parameters:

getMessageInsightsRequest - A Consumer that will call methods on GetMessageInsightsRequest.Builder to create a request. A request to return information about a message.

Returns:

Result of the GetMessageInsights operation returned by the service.

See Also:

• AWS API Documentation

getSuppressedDestination

default GetSuppressedDestinationResponse getSuppressedDestination(GetSuppressedDestinationRequest getSuppressedDestinationRequest)
                                                           throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieves information about a specific email address that's on the suppression list for your account.

Parameters:

getSuppressedDestinationRequest - A request to retrieve information about an email address that's on the suppression list for your account.

Returns:

Result of the GetSuppressedDestination operation returned by the service.

See Also:

• AWS API Documentation

getSuppressedDestination

default GetSuppressedDestinationResponse getSuppressedDestination(Consumer<GetSuppressedDestinationRequest.Builder> getSuppressedDestinationRequest)
                                                           throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieves information about a specific email address that's on the suppression list for your account.

This is a convenience which creates an instance of the GetSuppressedDestinationRequest.Builder avoiding the need to create one manually via GetSuppressedDestinationRequest.builder()

Parameters:

getSuppressedDestinationRequest - A Consumer that will call methods on GetSuppressedDestinationRequest.Builder to create a request. A request to retrieve information about an email address that's on the suppression list for your account.

Returns:

Result of the GetSuppressedDestination operation returned by the service.

See Also:

• AWS API Documentation

listConfigurationSets

default ListConfigurationSetsResponse listConfigurationSets(ListConfigurationSetsRequest listConfigurationSetsRequest)
                                                     throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

List all of the configuration sets associated with your account in the current region.

Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

Parameters:

listConfigurationSetsRequest - A request to obtain a list of configuration sets for your Amazon SES account in the current Amazon Web Services Region.

Returns:

Result of the ListConfigurationSets operation returned by the service.

See Also:

• AWS API Documentation

listConfigurationSets

default ListConfigurationSetsResponse listConfigurationSets(Consumer<ListConfigurationSetsRequest.Builder> listConfigurationSetsRequest)
                                                     throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

List all of the configuration sets associated with your account in the current region.

Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.

This is a convenience which creates an instance of the ListConfigurationSetsRequest.Builder avoiding the need to create one manually via ListConfigurationSetsRequest.builder()

Parameters:

listConfigurationSetsRequest - A Consumer that will call methods on ListConfigurationSetsRequest.Builder to create a request. A request to obtain a list of configuration sets for your Amazon SES account in the current Amazon Web Services Region.

Returns:

Result of the ListConfigurationSets operation returned by the service.

See Also:

• AWS API Documentation

listConfigurationSetsPaginator

default ListConfigurationSetsIterable listConfigurationSetsPaginator(ListConfigurationSetsRequest listConfigurationSetsRequest)
                                                              throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listConfigurationSets(software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListConfigurationSetsIterable responses = client.listConfigurationSetsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListConfigurationSetsIterable responses = client
             .listConfigurationSetsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListConfigurationSetsIterable responses = client.listConfigurationSetsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listConfigurationSets(software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsRequest) operation.

Parameters:

listConfigurationSetsRequest - A request to obtain a list of configuration sets for your Amazon SES account in the current Amazon Web Services Region.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listConfigurationSetsPaginator

default ListConfigurationSetsIterable listConfigurationSetsPaginator(Consumer<ListConfigurationSetsRequest.Builder> listConfigurationSetsRequest)
                                                              throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listConfigurationSets(software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListConfigurationSetsIterable responses = client.listConfigurationSetsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListConfigurationSetsIterable responses = client
             .listConfigurationSetsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListConfigurationSetsIterable responses = client.listConfigurationSetsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listConfigurationSets(software.amazon.awssdk.services.sesv2.model.ListConfigurationSetsRequest) operation.

This is a convenience which creates an instance of the ListConfigurationSetsRequest.Builder avoiding the need to create one manually via ListConfigurationSetsRequest.builder()

Parameters:

listConfigurationSetsRequest - A Consumer that will call methods on ListConfigurationSetsRequest.Builder to create a request. A request to obtain a list of configuration sets for your Amazon SES account in the current Amazon Web Services Region.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listContactLists

default ListContactListsResponse listContactLists(ListContactListsRequest listContactListsRequest)
                                           throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists all of the contact lists available.

Parameters:

listContactListsRequest -

Returns:

Result of the ListContactLists operation returned by the service.

See Also:

• AWS API Documentation

listContactLists

default ListContactListsResponse listContactLists(Consumer<ListContactListsRequest.Builder> listContactListsRequest)
                                           throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists all of the contact lists available.

This is a convenience which creates an instance of the ListContactListsRequest.Builder avoiding the need to create one manually via ListContactListsRequest.builder()

Parameters:

listContactListsRequest - A Consumer that will call methods on ListContactListsRequest.Builder to create a request.

Returns:

Result of the ListContactLists operation returned by the service.

See Also:

• AWS API Documentation

listContactListsPaginator

default ListContactListsIterable listContactListsPaginator(ListContactListsRequest listContactListsRequest)
                                                    throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listContactLists(software.amazon.awssdk.services.sesv2.model.ListContactListsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactListsIterable responses = client.listContactListsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListContactListsIterable responses = client
             .listContactListsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListContactListsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactListsIterable responses = client.listContactListsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listContactLists(software.amazon.awssdk.services.sesv2.model.ListContactListsRequest) operation.

Parameters:

listContactListsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listContactListsPaginator

default ListContactListsIterable listContactListsPaginator(Consumer<ListContactListsRequest.Builder> listContactListsRequest)
                                                    throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listContactLists(software.amazon.awssdk.services.sesv2.model.ListContactListsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactListsIterable responses = client.listContactListsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListContactListsIterable responses = client
             .listContactListsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListContactListsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactListsIterable responses = client.listContactListsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listContactLists(software.amazon.awssdk.services.sesv2.model.ListContactListsRequest) operation.

This is a convenience which creates an instance of the ListContactListsRequest.Builder avoiding the need to create one manually via ListContactListsRequest.builder()

Parameters:

listContactListsRequest - A Consumer that will call methods on ListContactListsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listContacts

default ListContactsResponse listContacts(ListContactsRequest listContactsRequest)
                                   throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the contacts present in a specific contact list.

Parameters:

listContactsRequest -

Returns:

Result of the ListContacts operation returned by the service.

See Also:

• AWS API Documentation

listContacts

default ListContactsResponse listContacts(Consumer<ListContactsRequest.Builder> listContactsRequest)
                                   throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the contacts present in a specific contact list.

This is a convenience which creates an instance of the ListContactsRequest.Builder avoiding the need to create one manually via ListContactsRequest.builder()

Parameters:

listContactsRequest - A Consumer that will call methods on ListContactsRequest.Builder to create a request.

Returns:

Result of the ListContacts operation returned by the service.

See Also:

• AWS API Documentation

listContactsPaginator

default ListContactsIterable listContactsPaginator(ListContactsRequest listContactsRequest)
                                            throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listContacts(software.amazon.awssdk.services.sesv2.model.ListContactsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactsIterable responses = client.listContactsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListContactsIterable responses = client.listContactsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListContactsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactsIterable responses = client.listContactsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listContacts(software.amazon.awssdk.services.sesv2.model.ListContactsRequest) operation.

Parameters:

listContactsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listContactsPaginator

default ListContactsIterable listContactsPaginator(Consumer<ListContactsRequest.Builder> listContactsRequest)
                                            throws BadRequestException,
TooManyRequestsException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listContacts(software.amazon.awssdk.services.sesv2.model.ListContactsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactsIterable responses = client.listContactsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListContactsIterable responses = client.listContactsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListContactsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListContactsIterable responses = client.listContactsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listContacts(software.amazon.awssdk.services.sesv2.model.ListContactsRequest) operation.

This is a convenience which creates an instance of the ListContactsRequest.Builder avoiding the need to create one manually via ListContactsRequest.builder()

Parameters:

listContactsRequest - A Consumer that will call methods on ListContactsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listCustomVerificationEmailTemplates

default ListCustomVerificationEmailTemplatesResponse listCustomVerificationEmailTemplates(ListCustomVerificationEmailTemplatesRequest listCustomVerificationEmailTemplatesRequest)
                                                                                   throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the existing custom verification email templates for your account in the current Amazon Web Services Region.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

listCustomVerificationEmailTemplatesRequest - Represents a request to list the existing custom verification email templates for your account.

Returns:

Result of the ListCustomVerificationEmailTemplates operation returned by the service.

See Also:

• AWS API Documentation

listCustomVerificationEmailTemplates

default ListCustomVerificationEmailTemplatesResponse listCustomVerificationEmailTemplates(Consumer<ListCustomVerificationEmailTemplatesRequest.Builder> listCustomVerificationEmailTemplatesRequest)
                                                                                   throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the existing custom verification email templates for your account in the current Amazon Web Services Region.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the ListCustomVerificationEmailTemplatesRequest.Builder avoiding the need to create one manually via ListCustomVerificationEmailTemplatesRequest.builder()

Parameters:

listCustomVerificationEmailTemplatesRequest - A Consumer that will call methods on ListCustomVerificationEmailTemplatesRequest.Builder to create a request. Represents a request to list the existing custom verification email templates for your account.

Returns:

Result of the ListCustomVerificationEmailTemplates operation returned by the service.

See Also:

• AWS API Documentation

listCustomVerificationEmailTemplatesPaginator

default ListCustomVerificationEmailTemplatesIterable listCustomVerificationEmailTemplatesPaginator(ListCustomVerificationEmailTemplatesRequest listCustomVerificationEmailTemplatesRequest)
                                                                                            throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listCustomVerificationEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListCustomVerificationEmailTemplatesIterable responses = client.listCustomVerificationEmailTemplatesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListCustomVerificationEmailTemplatesIterable responses = client
             .listCustomVerificationEmailTemplatesPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListCustomVerificationEmailTemplatesIterable responses = client.listCustomVerificationEmailTemplatesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listCustomVerificationEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesRequest) operation.

Parameters:

listCustomVerificationEmailTemplatesRequest - Represents a request to list the existing custom verification email templates for your account.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listCustomVerificationEmailTemplatesPaginator

default ListCustomVerificationEmailTemplatesIterable listCustomVerificationEmailTemplatesPaginator(Consumer<ListCustomVerificationEmailTemplatesRequest.Builder> listCustomVerificationEmailTemplatesRequest)
                                                                                            throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listCustomVerificationEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListCustomVerificationEmailTemplatesIterable responses = client.listCustomVerificationEmailTemplatesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListCustomVerificationEmailTemplatesIterable responses = client
             .listCustomVerificationEmailTemplatesPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListCustomVerificationEmailTemplatesIterable responses = client.listCustomVerificationEmailTemplatesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listCustomVerificationEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListCustomVerificationEmailTemplatesRequest) operation.

This is a convenience which creates an instance of the ListCustomVerificationEmailTemplatesRequest.Builder avoiding the need to create one manually via ListCustomVerificationEmailTemplatesRequest.builder()

Parameters:

listCustomVerificationEmailTemplatesRequest - A Consumer that will call methods on ListCustomVerificationEmailTemplatesRequest.Builder to create a request. Represents a request to list the existing custom verification email templates for your account.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listDedicatedIpPools

default ListDedicatedIpPoolsResponse listDedicatedIpPools(ListDedicatedIpPoolsRequest listDedicatedIpPoolsRequest)
                                                   throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

List all of the dedicated IP pools that exist in your Amazon Web Services account in the current Region.

Parameters:

listDedicatedIpPoolsRequest - A request to obtain a list of dedicated IP pools.

Returns:

Result of the ListDedicatedIpPools operation returned by the service.

See Also:

• AWS API Documentation

listDedicatedIpPools

default ListDedicatedIpPoolsResponse listDedicatedIpPools(Consumer<ListDedicatedIpPoolsRequest.Builder> listDedicatedIpPoolsRequest)
                                                   throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

List all of the dedicated IP pools that exist in your Amazon Web Services account in the current Region.

This is a convenience which creates an instance of the ListDedicatedIpPoolsRequest.Builder avoiding the need to create one manually via ListDedicatedIpPoolsRequest.builder()

Parameters:

listDedicatedIpPoolsRequest - A Consumer that will call methods on ListDedicatedIpPoolsRequest.Builder to create a request. A request to obtain a list of dedicated IP pools.

Returns:

Result of the ListDedicatedIpPools operation returned by the service.

See Also:

• AWS API Documentation

listDedicatedIpPoolsPaginator

default ListDedicatedIpPoolsIterable listDedicatedIpPoolsPaginator(ListDedicatedIpPoolsRequest listDedicatedIpPoolsRequest)
                                                            throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listDedicatedIpPools(software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListDedicatedIpPoolsIterable responses = client.listDedicatedIpPoolsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListDedicatedIpPoolsIterable responses = client
             .listDedicatedIpPoolsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListDedicatedIpPoolsIterable responses = client.listDedicatedIpPoolsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listDedicatedIpPools(software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsRequest) operation.

Parameters:

listDedicatedIpPoolsRequest - A request to obtain a list of dedicated IP pools.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listDedicatedIpPoolsPaginator

default ListDedicatedIpPoolsIterable listDedicatedIpPoolsPaginator(Consumer<ListDedicatedIpPoolsRequest.Builder> listDedicatedIpPoolsRequest)
                                                            throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listDedicatedIpPools(software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListDedicatedIpPoolsIterable responses = client.listDedicatedIpPoolsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListDedicatedIpPoolsIterable responses = client
             .listDedicatedIpPoolsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListDedicatedIpPoolsIterable responses = client.listDedicatedIpPoolsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listDedicatedIpPools(software.amazon.awssdk.services.sesv2.model.ListDedicatedIpPoolsRequest) operation.

This is a convenience which creates an instance of the ListDedicatedIpPoolsRequest.Builder avoiding the need to create one manually via ListDedicatedIpPoolsRequest.builder()

Parameters:

listDedicatedIpPoolsRequest - A Consumer that will call methods on ListDedicatedIpPoolsRequest.Builder to create a request. A request to obtain a list of dedicated IP pools.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listDeliverabilityTestReports

default ListDeliverabilityTestReportsResponse listDeliverabilityTestReports(ListDeliverabilityTestReportsRequest listDeliverabilityTestReportsRequest)
                                                                     throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Show a list of the predictive inbox placement tests that you've performed, regardless of their statuses. For predictive inbox placement tests that are complete, you can use the GetDeliverabilityTestReport operation to view the results.

Parameters:

listDeliverabilityTestReportsRequest - A request to list all of the predictive inbox placement tests that you've performed.

Returns:

Result of the ListDeliverabilityTestReports operation returned by the service.

See Also:

• AWS API Documentation

listDeliverabilityTestReports

default ListDeliverabilityTestReportsResponse listDeliverabilityTestReports(Consumer<ListDeliverabilityTestReportsRequest.Builder> listDeliverabilityTestReportsRequest)
                                                                     throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Show a list of the predictive inbox placement tests that you've performed, regardless of their statuses. For predictive inbox placement tests that are complete, you can use the GetDeliverabilityTestReport operation to view the results.

This is a convenience which creates an instance of the ListDeliverabilityTestReportsRequest.Builder avoiding the need to create one manually via ListDeliverabilityTestReportsRequest.builder()

Parameters:

listDeliverabilityTestReportsRequest - A Consumer that will call methods on ListDeliverabilityTestReportsRequest.Builder to create a request. A request to list all of the predictive inbox placement tests that you've performed.

Returns:

Result of the ListDeliverabilityTestReports operation returned by the service.

See Also:

• AWS API Documentation

listDeliverabilityTestReportsPaginator

default ListDeliverabilityTestReportsIterable listDeliverabilityTestReportsPaginator(ListDeliverabilityTestReportsRequest listDeliverabilityTestReportsRequest)
                                                                              throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listDeliverabilityTestReports(software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListDeliverabilityTestReportsIterable responses = client.listDeliverabilityTestReportsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListDeliverabilityTestReportsIterable responses = client
             .listDeliverabilityTestReportsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListDeliverabilityTestReportsIterable responses = client.listDeliverabilityTestReportsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listDeliverabilityTestReports(software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsRequest) operation.

Parameters:

listDeliverabilityTestReportsRequest - A request to list all of the predictive inbox placement tests that you've performed.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listDeliverabilityTestReportsPaginator

default ListDeliverabilityTestReportsIterable listDeliverabilityTestReportsPaginator(Consumer<ListDeliverabilityTestReportsRequest.Builder> listDeliverabilityTestReportsRequest)
                                                                              throws TooManyRequestsException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listDeliverabilityTestReports(software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListDeliverabilityTestReportsIterable responses = client.listDeliverabilityTestReportsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListDeliverabilityTestReportsIterable responses = client
             .listDeliverabilityTestReportsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListDeliverabilityTestReportsIterable responses = client.listDeliverabilityTestReportsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listDeliverabilityTestReports(software.amazon.awssdk.services.sesv2.model.ListDeliverabilityTestReportsRequest) operation.

This is a convenience which creates an instance of the ListDeliverabilityTestReportsRequest.Builder avoiding the need to create one manually via ListDeliverabilityTestReportsRequest.builder()

Parameters:

listDeliverabilityTestReportsRequest - A Consumer that will call methods on ListDeliverabilityTestReportsRequest.Builder to create a request. A request to list all of the predictive inbox placement tests that you've performed.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listDomainDeliverabilityCampaigns

default ListDomainDeliverabilityCampaignsResponse listDomainDeliverabilityCampaigns(ListDomainDeliverabilityCampaignsRequest listDomainDeliverabilityCampaignsRequest)
                                                                             throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard for the domain.

Parameters:

listDomainDeliverabilityCampaignsRequest - Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard.

Returns:

Result of the ListDomainDeliverabilityCampaigns operation returned by the service.

See Also:

• AWS API Documentation

listDomainDeliverabilityCampaigns

default ListDomainDeliverabilityCampaignsResponse listDomainDeliverabilityCampaigns(Consumer<ListDomainDeliverabilityCampaignsRequest.Builder> listDomainDeliverabilityCampaignsRequest)
                                                                             throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard for the domain.

This is a convenience which creates an instance of the ListDomainDeliverabilityCampaignsRequest.Builder avoiding the need to create one manually via ListDomainDeliverabilityCampaignsRequest.builder()

Parameters:

listDomainDeliverabilityCampaignsRequest - A Consumer that will call methods on ListDomainDeliverabilityCampaignsRequest.Builder to create a request. Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard.

Returns:

Result of the ListDomainDeliverabilityCampaigns operation returned by the service.

See Also:

• AWS API Documentation

listDomainDeliverabilityCampaignsPaginator

default ListDomainDeliverabilityCampaignsIterable listDomainDeliverabilityCampaignsPaginator(ListDomainDeliverabilityCampaignsRequest listDomainDeliverabilityCampaignsRequest)
                                                                                      throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listDomainDeliverabilityCampaigns(software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListDomainDeliverabilityCampaignsIterable responses = client.listDomainDeliverabilityCampaignsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListDomainDeliverabilityCampaignsIterable responses = client
             .listDomainDeliverabilityCampaignsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListDomainDeliverabilityCampaignsIterable responses = client.listDomainDeliverabilityCampaignsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listDomainDeliverabilityCampaigns(software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsRequest) operation.

Parameters:

listDomainDeliverabilityCampaignsRequest - Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listDomainDeliverabilityCampaignsPaginator

default ListDomainDeliverabilityCampaignsIterable listDomainDeliverabilityCampaignsPaginator(Consumer<ListDomainDeliverabilityCampaignsRequest.Builder> listDomainDeliverabilityCampaignsRequest)
                                                                                      throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listDomainDeliverabilityCampaigns(software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListDomainDeliverabilityCampaignsIterable responses = client.listDomainDeliverabilityCampaignsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListDomainDeliverabilityCampaignsIterable responses = client
             .listDomainDeliverabilityCampaignsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListDomainDeliverabilityCampaignsIterable responses = client.listDomainDeliverabilityCampaignsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listDomainDeliverabilityCampaigns(software.amazon.awssdk.services.sesv2.model.ListDomainDeliverabilityCampaignsRequest) operation.

This is a convenience which creates an instance of the ListDomainDeliverabilityCampaignsRequest.Builder avoiding the need to create one manually via ListDomainDeliverabilityCampaignsRequest.builder()

Parameters:

listDomainDeliverabilityCampaignsRequest - A Consumer that will call methods on ListDomainDeliverabilityCampaignsRequest.Builder to create a request. Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listEmailIdentities

default ListEmailIdentitiesResponse listEmailIdentities(ListEmailIdentitiesRequest listEmailIdentitiesRequest)
                                                 throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns a list of all of the email identities that are associated with your Amazon Web Services account. An identity can be either an email address or a domain. This operation returns identities that are verified as well as those that aren't. This operation returns identities that are associated with Amazon SES and Amazon Pinpoint.

Parameters:

listEmailIdentitiesRequest - A request to list all of the email identities associated with your Amazon Web Services account. This list includes identities that you've already verified, identities that are unverified, and identities that were verified in the past, but are no longer verified.

Returns:

Result of the ListEmailIdentities operation returned by the service.

See Also:

• AWS API Documentation

listEmailIdentities

default ListEmailIdentitiesResponse listEmailIdentities(Consumer<ListEmailIdentitiesRequest.Builder> listEmailIdentitiesRequest)
                                                 throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Returns a list of all of the email identities that are associated with your Amazon Web Services account. An identity can be either an email address or a domain. This operation returns identities that are verified as well as those that aren't. This operation returns identities that are associated with Amazon SES and Amazon Pinpoint.

This is a convenience which creates an instance of the ListEmailIdentitiesRequest.Builder avoiding the need to create one manually via ListEmailIdentitiesRequest.builder()

Parameters:

listEmailIdentitiesRequest - A Consumer that will call methods on ListEmailIdentitiesRequest.Builder to create a request. A request to list all of the email identities associated with your Amazon Web Services account. This list includes identities that you've already verified, identities that are unverified, and identities that were verified in the past, but are no longer verified.

Returns:

Result of the ListEmailIdentities operation returned by the service.

See Also:

• AWS API Documentation

listEmailIdentitiesPaginator

default ListEmailIdentitiesIterable listEmailIdentitiesPaginator(ListEmailIdentitiesRequest listEmailIdentitiesRequest)
                                                          throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listEmailIdentities(software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailIdentitiesIterable responses = client.listEmailIdentitiesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListEmailIdentitiesIterable responses = client
             .listEmailIdentitiesPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailIdentitiesIterable responses = client.listEmailIdentitiesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listEmailIdentities(software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesRequest) operation.

Parameters:

listEmailIdentitiesRequest - A request to list all of the email identities associated with your Amazon Web Services account. This list includes identities that you've already verified, identities that are unverified, and identities that were verified in the past, but are no longer verified.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listEmailIdentitiesPaginator

default ListEmailIdentitiesIterable listEmailIdentitiesPaginator(Consumer<ListEmailIdentitiesRequest.Builder> listEmailIdentitiesRequest)
                                                          throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listEmailIdentities(software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailIdentitiesIterable responses = client.listEmailIdentitiesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListEmailIdentitiesIterable responses = client
             .listEmailIdentitiesPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailIdentitiesIterable responses = client.listEmailIdentitiesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listEmailIdentities(software.amazon.awssdk.services.sesv2.model.ListEmailIdentitiesRequest) operation.

This is a convenience which creates an instance of the ListEmailIdentitiesRequest.Builder avoiding the need to create one manually via ListEmailIdentitiesRequest.builder()

Parameters:

listEmailIdentitiesRequest - A Consumer that will call methods on ListEmailIdentitiesRequest.Builder to create a request. A request to list all of the email identities associated with your Amazon Web Services account. This list includes identities that you've already verified, identities that are unverified, and identities that were verified in the past, but are no longer verified.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listEmailTemplates

default ListEmailTemplatesResponse listEmailTemplates(ListEmailTemplatesRequest listEmailTemplatesRequest)
                                               throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region.

You can execute this operation no more than once per second.

Parameters:

listEmailTemplatesRequest - Represents a request to list the email templates present in your Amazon SES account in the current Amazon Web Services Region. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the ListEmailTemplates operation returned by the service.

See Also:

• AWS API Documentation

listEmailTemplates

default ListEmailTemplatesResponse listEmailTemplates(Consumer<ListEmailTemplatesRequest.Builder> listEmailTemplatesRequest)
                                               throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the ListEmailTemplatesRequest.Builder avoiding the need to create one manually via ListEmailTemplatesRequest.builder()

Parameters:

listEmailTemplatesRequest - A Consumer that will call methods on ListEmailTemplatesRequest.Builder to create a request. Represents a request to list the email templates present in your Amazon SES account in the current Amazon Web Services Region. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the ListEmailTemplates operation returned by the service.

See Also:

• AWS API Documentation

listEmailTemplatesPaginator

default ListEmailTemplatesIterable listEmailTemplatesPaginator(ListEmailTemplatesRequest listEmailTemplatesRequest)
                                                        throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailTemplatesIterable responses = client.listEmailTemplatesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListEmailTemplatesIterable responses = client
             .listEmailTemplatesPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailTemplatesIterable responses = client.listEmailTemplatesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesRequest) operation.

Parameters:

listEmailTemplatesRequest - Represents a request to list the email templates present in your Amazon SES account in the current Amazon Web Services Region. For more information, see the Amazon SES Developer Guide.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listEmailTemplatesPaginator

default ListEmailTemplatesIterable listEmailTemplatesPaginator(Consumer<ListEmailTemplatesRequest.Builder> listEmailTemplatesRequest)
                                                        throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailTemplatesIterable responses = client.listEmailTemplatesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListEmailTemplatesIterable responses = client
             .listEmailTemplatesPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListEmailTemplatesIterable responses = client.listEmailTemplatesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listEmailTemplates(software.amazon.awssdk.services.sesv2.model.ListEmailTemplatesRequest) operation.

This is a convenience which creates an instance of the ListEmailTemplatesRequest.Builder avoiding the need to create one manually via ListEmailTemplatesRequest.builder()

Parameters:

listEmailTemplatesRequest - A Consumer that will call methods on ListEmailTemplatesRequest.Builder to create a request. Represents a request to list the email templates present in your Amazon SES account in the current Amazon Web Services Region. For more information, see the Amazon SES Developer Guide.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listExportJobs

default ListExportJobsResponse listExportJobs(ListExportJobsRequest listExportJobsRequest)
                                       throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists all of the export jobs.

Parameters:

listExportJobsRequest - Represents a request to list all export jobs with filters.

Returns:

Result of the ListExportJobs operation returned by the service.

See Also:

• AWS API Documentation

listExportJobs

default ListExportJobsResponse listExportJobs(Consumer<ListExportJobsRequest.Builder> listExportJobsRequest)
                                       throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists all of the export jobs.

This is a convenience which creates an instance of the ListExportJobsRequest.Builder avoiding the need to create one manually via ListExportJobsRequest.builder()

Parameters:

listExportJobsRequest - A Consumer that will call methods on ListExportJobsRequest.Builder to create a request. Represents a request to list all export jobs with filters.

Returns:

Result of the ListExportJobs operation returned by the service.

See Also:

• AWS API Documentation

listExportJobsPaginator

default ListExportJobsIterable listExportJobsPaginator(ListExportJobsRequest listExportJobsRequest)
                                                throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listExportJobs(software.amazon.awssdk.services.sesv2.model.ListExportJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListExportJobsIterable responses = client.listExportJobsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListExportJobsIterable responses = client.listExportJobsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListExportJobsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListExportJobsIterable responses = client.listExportJobsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listExportJobs(software.amazon.awssdk.services.sesv2.model.ListExportJobsRequest) operation.

Parameters:

listExportJobsRequest - Represents a request to list all export jobs with filters.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listExportJobsPaginator

default ListExportJobsIterable listExportJobsPaginator(Consumer<ListExportJobsRequest.Builder> listExportJobsRequest)
                                                throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listExportJobs(software.amazon.awssdk.services.sesv2.model.ListExportJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListExportJobsIterable responses = client.listExportJobsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListExportJobsIterable responses = client.listExportJobsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListExportJobsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListExportJobsIterable responses = client.listExportJobsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listExportJobs(software.amazon.awssdk.services.sesv2.model.ListExportJobsRequest) operation.

This is a convenience which creates an instance of the ListExportJobsRequest.Builder avoiding the need to create one manually via ListExportJobsRequest.builder()

Parameters:

listExportJobsRequest - A Consumer that will call methods on ListExportJobsRequest.Builder to create a request. Represents a request to list all export jobs with filters.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listImportJobs

default ListImportJobsResponse listImportJobs(ListImportJobsRequest listImportJobsRequest)
                                       throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists all of the import jobs.

Parameters:

listImportJobsRequest - Represents a request to list all of the import jobs for a data destination within the specified maximum number of import jobs.

Returns:

Result of the ListImportJobs operation returned by the service.

See Also:

• AWS API Documentation

listImportJobs

default ListImportJobsResponse listImportJobs(Consumer<ListImportJobsRequest.Builder> listImportJobsRequest)
                                       throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists all of the import jobs.

This is a convenience which creates an instance of the ListImportJobsRequest.Builder avoiding the need to create one manually via ListImportJobsRequest.builder()

Parameters:

listImportJobsRequest - A Consumer that will call methods on ListImportJobsRequest.Builder to create a request. Represents a request to list all of the import jobs for a data destination within the specified maximum number of import jobs.

Returns:

Result of the ListImportJobs operation returned by the service.

See Also:

• AWS API Documentation

listImportJobsPaginator

default ListImportJobsIterable listImportJobsPaginator(ListImportJobsRequest listImportJobsRequest)
                                                throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listImportJobs(software.amazon.awssdk.services.sesv2.model.ListImportJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListImportJobsIterable responses = client.listImportJobsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListImportJobsIterable responses = client.listImportJobsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListImportJobsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListImportJobsIterable responses = client.listImportJobsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listImportJobs(software.amazon.awssdk.services.sesv2.model.ListImportJobsRequest) operation.

Parameters:

listImportJobsRequest - Represents a request to list all of the import jobs for a data destination within the specified maximum number of import jobs.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listImportJobsPaginator

default ListImportJobsIterable listImportJobsPaginator(Consumer<ListImportJobsRequest.Builder> listImportJobsRequest)
                                                throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listImportJobs(software.amazon.awssdk.services.sesv2.model.ListImportJobsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListImportJobsIterable responses = client.listImportJobsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListImportJobsIterable responses = client.listImportJobsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListImportJobsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListImportJobsIterable responses = client.listImportJobsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listImportJobs(software.amazon.awssdk.services.sesv2.model.ListImportJobsRequest) operation.

This is a convenience which creates an instance of the ListImportJobsRequest.Builder avoiding the need to create one manually via ListImportJobsRequest.builder()

Parameters:

listImportJobsRequest - A Consumer that will call methods on ListImportJobsRequest.Builder to create a request. Represents a request to list all of the import jobs for a data destination within the specified maximum number of import jobs.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listRecommendations

default ListRecommendationsResponse listRecommendations(ListRecommendationsRequest listRecommendationsRequest)
                                                 throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the recommendations present in your Amazon SES account in the current Amazon Web Services Region.

You can execute this operation no more than once per second.

Parameters:

listRecommendationsRequest - Represents a request to list the existing recommendations for your account.

Returns:

Result of the ListRecommendations operation returned by the service.

See Also:

• AWS API Documentation

listRecommendations

default ListRecommendationsResponse listRecommendations(Consumer<ListRecommendationsRequest.Builder> listRecommendationsRequest)
                                                 throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

Lists the recommendations present in your Amazon SES account in the current Amazon Web Services Region.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the ListRecommendationsRequest.Builder avoiding the need to create one manually via ListRecommendationsRequest.builder()

Parameters:

listRecommendationsRequest - A Consumer that will call methods on ListRecommendationsRequest.Builder to create a request. Represents a request to list the existing recommendations for your account.

Returns:

Result of the ListRecommendations operation returned by the service.

See Also:

• AWS API Documentation

listRecommendationsPaginator

default ListRecommendationsIterable listRecommendationsPaginator(ListRecommendationsRequest listRecommendationsRequest)
                                                          throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listRecommendations(software.amazon.awssdk.services.sesv2.model.ListRecommendationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListRecommendationsIterable responses = client.listRecommendationsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListRecommendationsIterable responses = client
             .listRecommendationsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListRecommendationsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListRecommendationsIterable responses = client.listRecommendationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listRecommendations(software.amazon.awssdk.services.sesv2.model.ListRecommendationsRequest) operation.

Parameters:

listRecommendationsRequest - Represents a request to list the existing recommendations for your account.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listRecommendationsPaginator

default ListRecommendationsIterable listRecommendationsPaginator(Consumer<ListRecommendationsRequest.Builder> listRecommendationsRequest)
                                                          throws TooManyRequestsException,
BadRequestException,
NotFoundException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listRecommendations(software.amazon.awssdk.services.sesv2.model.ListRecommendationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListRecommendationsIterable responses = client.listRecommendationsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListRecommendationsIterable responses = client
             .listRecommendationsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListRecommendationsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListRecommendationsIterable responses = client.listRecommendationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listRecommendations(software.amazon.awssdk.services.sesv2.model.ListRecommendationsRequest) operation.

This is a convenience which creates an instance of the ListRecommendationsRequest.Builder avoiding the need to create one manually via ListRecommendationsRequest.builder()

Parameters:

listRecommendationsRequest - A Consumer that will call methods on ListRecommendationsRequest.Builder to create a request. Represents a request to list the existing recommendations for your account.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listSuppressedDestinations

default ListSuppressedDestinationsResponse listSuppressedDestinations(ListSuppressedDestinationsRequest listSuppressedDestinationsRequest)
                                                               throws BadRequestException,
TooManyRequestsException,
InvalidNextTokenException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieves a list of email addresses that are on the suppression list for your account.

Parameters:

listSuppressedDestinationsRequest - A request to obtain a list of email destinations that are on the suppression list for your account.

Returns:

Result of the ListSuppressedDestinations operation returned by the service.

See Also:

• AWS API Documentation

listSuppressedDestinations

default ListSuppressedDestinationsResponse listSuppressedDestinations(Consumer<ListSuppressedDestinationsRequest.Builder> listSuppressedDestinationsRequest)
                                                               throws BadRequestException,
TooManyRequestsException,
InvalidNextTokenException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieves a list of email addresses that are on the suppression list for your account.

This is a convenience which creates an instance of the ListSuppressedDestinationsRequest.Builder avoiding the need to create one manually via ListSuppressedDestinationsRequest.builder()

Parameters:

listSuppressedDestinationsRequest - A Consumer that will call methods on ListSuppressedDestinationsRequest.Builder to create a request. A request to obtain a list of email destinations that are on the suppression list for your account.

Returns:

Result of the ListSuppressedDestinations operation returned by the service.

See Also:

• AWS API Documentation

listSuppressedDestinationsPaginator

default ListSuppressedDestinationsIterable listSuppressedDestinationsPaginator(ListSuppressedDestinationsRequest listSuppressedDestinationsRequest)
                                                                        throws BadRequestException,
TooManyRequestsException,
InvalidNextTokenException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listSuppressedDestinations(software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListSuppressedDestinationsIterable responses = client.listSuppressedDestinationsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListSuppressedDestinationsIterable responses = client
             .listSuppressedDestinationsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListSuppressedDestinationsIterable responses = client.listSuppressedDestinationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listSuppressedDestinations(software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsRequest) operation.

Parameters:

listSuppressedDestinationsRequest - A request to obtain a list of email destinations that are on the suppression list for your account.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listSuppressedDestinationsPaginator

default ListSuppressedDestinationsIterable listSuppressedDestinationsPaginator(Consumer<ListSuppressedDestinationsRequest.Builder> listSuppressedDestinationsRequest)
                                                                        throws BadRequestException,
TooManyRequestsException,
InvalidNextTokenException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a variant of listSuppressedDestinations(software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.sesv2.paginators.ListSuppressedDestinationsIterable responses = client.listSuppressedDestinationsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.sesv2.paginators.ListSuppressedDestinationsIterable responses = client
             .listSuppressedDestinationsPaginator(request);
     for (software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.sesv2.paginators.ListSuppressedDestinationsIterable responses = client.listSuppressedDestinationsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of PageSize won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listSuppressedDestinations(software.amazon.awssdk.services.sesv2.model.ListSuppressedDestinationsRequest) operation.

This is a convenience which creates an instance of the ListSuppressedDestinationsRequest.Builder avoiding the need to create one manually via ListSuppressedDestinationsRequest.builder()

Parameters:

listSuppressedDestinationsRequest - A Consumer that will call methods on ListSuppressedDestinationsRequest.Builder to create a request. A request to obtain a list of email destinations that are on the suppression list for your account.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listTagsForResource

default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws BadRequestException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve a list of the tags (keys and values) that are associated with a specified resource. A tag is a label that you optionally define and associate with a resource. Each tag consists of a required tag key and an optional associated tag value. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.

Parameters:

listTagsForResourceRequest -

Returns:

Result of the ListTagsForResource operation returned by the service.

See Also:

• AWS API Documentation

listTagsForResource

default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws BadRequestException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Retrieve a list of the tags (keys and values) that are associated with a specified resource. A tag is a label that you optionally define and associate with a resource. Each tag consists of a required tag key and an optional associated tag value. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.

This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()

Parameters:

listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.

Returns:

Result of the ListTagsForResource operation returned by the service.

See Also:

• AWS API Documentation

putAccountDedicatedIpWarmupAttributes

default PutAccountDedicatedIpWarmupAttributesResponse putAccountDedicatedIpWarmupAttributes(PutAccountDedicatedIpWarmupAttributesRequest putAccountDedicatedIpWarmupAttributesRequest)
                                                                                     throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable the automatic warm-up feature for dedicated IP addresses.

Parameters:

putAccountDedicatedIpWarmupAttributesRequest - A request to enable or disable the automatic IP address warm-up feature.

Returns:

Result of the PutAccountDedicatedIpWarmupAttributes operation returned by the service.

See Also:

• AWS API Documentation

putAccountDedicatedIpWarmupAttributes

default PutAccountDedicatedIpWarmupAttributesResponse putAccountDedicatedIpWarmupAttributes(Consumer<PutAccountDedicatedIpWarmupAttributesRequest.Builder> putAccountDedicatedIpWarmupAttributesRequest)
                                                                                     throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable the automatic warm-up feature for dedicated IP addresses.

This is a convenience which creates an instance of the PutAccountDedicatedIpWarmupAttributesRequest.Builder avoiding the need to create one manually via PutAccountDedicatedIpWarmupAttributesRequest.builder()

Parameters:

putAccountDedicatedIpWarmupAttributesRequest - A Consumer that will call methods on PutAccountDedicatedIpWarmupAttributesRequest.Builder to create a request. A request to enable or disable the automatic IP address warm-up feature.

Returns:

Result of the PutAccountDedicatedIpWarmupAttributes operation returned by the service.

See Also:

• AWS API Documentation

putAccountDetails

default PutAccountDetailsResponse putAccountDetails(PutAccountDetailsRequest putAccountDetailsRequest)
                                             throws TooManyRequestsException,
BadRequestException,
ConflictException,
AwsServiceException,
SdkClientException,
SesV2Exception

Update your Amazon SES account details.

Parameters:

putAccountDetailsRequest - A request to submit new account details.

Returns:

Result of the PutAccountDetails operation returned by the service.

See Also:

• AWS API Documentation

putAccountDetails

default PutAccountDetailsResponse putAccountDetails(Consumer<PutAccountDetailsRequest.Builder> putAccountDetailsRequest)
                                             throws TooManyRequestsException,
BadRequestException,
ConflictException,
AwsServiceException,
SdkClientException,
SesV2Exception

Update your Amazon SES account details.

This is a convenience which creates an instance of the PutAccountDetailsRequest.Builder avoiding the need to create one manually via PutAccountDetailsRequest.builder()

Parameters:

putAccountDetailsRequest - A Consumer that will call methods on PutAccountDetailsRequest.Builder to create a request. A request to submit new account details.

Returns:

Result of the PutAccountDetails operation returned by the service.

See Also:

• AWS API Documentation

putAccountSendingAttributes

default PutAccountSendingAttributesResponse putAccountSendingAttributes(PutAccountSendingAttributesRequest putAccountSendingAttributesRequest)
                                                                 throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable the ability of your account to send email.

Parameters:

putAccountSendingAttributesRequest - A request to change the ability of your account to send email.

Returns:

Result of the PutAccountSendingAttributes operation returned by the service.

See Also:

• AWS API Documentation

putAccountSendingAttributes

default PutAccountSendingAttributesResponse putAccountSendingAttributes(Consumer<PutAccountSendingAttributesRequest.Builder> putAccountSendingAttributesRequest)
                                                                 throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable the ability of your account to send email.

This is a convenience which creates an instance of the PutAccountSendingAttributesRequest.Builder avoiding the need to create one manually via PutAccountSendingAttributesRequest.builder()

Parameters:

putAccountSendingAttributesRequest - A Consumer that will call methods on PutAccountSendingAttributesRequest.Builder to create a request. A request to change the ability of your account to send email.

Returns:

Result of the PutAccountSendingAttributes operation returned by the service.

See Also:

• AWS API Documentation

putAccountSuppressionAttributes

default PutAccountSuppressionAttributesResponse putAccountSuppressionAttributes(PutAccountSuppressionAttributesRequest putAccountSuppressionAttributesRequest)
                                                                         throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Change the settings for the account-level suppression list.

Parameters:

putAccountSuppressionAttributesRequest - A request to change your account's suppression preferences.

Returns:

Result of the PutAccountSuppressionAttributes operation returned by the service.

See Also:

• AWS API Documentation

putAccountSuppressionAttributes

default PutAccountSuppressionAttributesResponse putAccountSuppressionAttributes(Consumer<PutAccountSuppressionAttributesRequest.Builder> putAccountSuppressionAttributesRequest)
                                                                         throws TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Change the settings for the account-level suppression list.

This is a convenience which creates an instance of the PutAccountSuppressionAttributesRequest.Builder avoiding the need to create one manually via PutAccountSuppressionAttributesRequest.builder()

Parameters:

putAccountSuppressionAttributesRequest - A Consumer that will call methods on PutAccountSuppressionAttributesRequest.Builder to create a request. A request to change your account's suppression preferences.

Returns:

Result of the PutAccountSuppressionAttributes operation returned by the service.

See Also:

• AWS API Documentation

putAccountVdmAttributes

default PutAccountVdmAttributesResponse putAccountVdmAttributes(PutAccountVdmAttributesRequest putAccountVdmAttributesRequest)
                                                         throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Update your Amazon SES account VDM attributes.

You can execute this operation no more than once per second.

Parameters:

putAccountVdmAttributesRequest - A request to submit new account VDM attributes.

Returns:

Result of the PutAccountVdmAttributes operation returned by the service.

See Also:

• AWS API Documentation

putAccountVdmAttributes

default PutAccountVdmAttributesResponse putAccountVdmAttributes(Consumer<PutAccountVdmAttributesRequest.Builder> putAccountVdmAttributesRequest)
                                                         throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Update your Amazon SES account VDM attributes.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the PutAccountVdmAttributesRequest.Builder avoiding the need to create one manually via PutAccountVdmAttributesRequest.builder()

Parameters:

putAccountVdmAttributesRequest - A Consumer that will call methods on PutAccountVdmAttributesRequest.Builder to create a request. A request to submit new account VDM attributes.

Returns:

Result of the PutAccountVdmAttributes operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetDeliveryOptions

default PutConfigurationSetDeliveryOptionsResponse putConfigurationSetDeliveryOptions(PutConfigurationSetDeliveryOptionsRequest putConfigurationSetDeliveryOptionsRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Associate a configuration set with a dedicated IP pool. You can use dedicated IP pools to create groups of dedicated IP addresses for sending specific types of email.

Parameters:

putConfigurationSetDeliveryOptionsRequest - A request to associate a configuration set with a dedicated IP pool.

Returns:

Result of the PutConfigurationSetDeliveryOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetDeliveryOptions

default PutConfigurationSetDeliveryOptionsResponse putConfigurationSetDeliveryOptions(Consumer<PutConfigurationSetDeliveryOptionsRequest.Builder> putConfigurationSetDeliveryOptionsRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Associate a configuration set with a dedicated IP pool. You can use dedicated IP pools to create groups of dedicated IP addresses for sending specific types of email.

This is a convenience which creates an instance of the PutConfigurationSetDeliveryOptionsRequest.Builder avoiding the need to create one manually via PutConfigurationSetDeliveryOptionsRequest.builder()

Parameters:

putConfigurationSetDeliveryOptionsRequest - A Consumer that will call methods on PutConfigurationSetDeliveryOptionsRequest.Builder to create a request. A request to associate a configuration set with a dedicated IP pool.

Returns:

Result of the PutConfigurationSetDeliveryOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetReputationOptions

default PutConfigurationSetReputationOptionsResponse putConfigurationSetReputationOptions(PutConfigurationSetReputationOptionsRequest putConfigurationSetReputationOptionsRequest)
                                                                                   throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable collection of reputation metrics for emails that you send using a particular configuration set in a specific Amazon Web Services Region.

Parameters:

putConfigurationSetReputationOptionsRequest - A request to enable or disable tracking of reputation metrics for a configuration set.

Returns:

Result of the PutConfigurationSetReputationOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetReputationOptions

default PutConfigurationSetReputationOptionsResponse putConfigurationSetReputationOptions(Consumer<PutConfigurationSetReputationOptionsRequest.Builder> putConfigurationSetReputationOptionsRequest)
                                                                                   throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable collection of reputation metrics for emails that you send using a particular configuration set in a specific Amazon Web Services Region.

This is a convenience which creates an instance of the PutConfigurationSetReputationOptionsRequest.Builder avoiding the need to create one manually via PutConfigurationSetReputationOptionsRequest.builder()

Parameters:

putConfigurationSetReputationOptionsRequest - A Consumer that will call methods on PutConfigurationSetReputationOptionsRequest.Builder to create a request. A request to enable or disable tracking of reputation metrics for a configuration set.

Returns:

Result of the PutConfigurationSetReputationOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetSendingOptions

default PutConfigurationSetSendingOptionsResponse putConfigurationSetSendingOptions(PutConfigurationSetSendingOptionsRequest putConfigurationSetSendingOptionsRequest)
                                                                             throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable email sending for messages that use a particular configuration set in a specific Amazon Web Services Region.

Parameters:

putConfigurationSetSendingOptionsRequest - A request to enable or disable the ability of Amazon SES to send emails that use a specific configuration set.

Returns:

Result of the PutConfigurationSetSendingOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetSendingOptions

default PutConfigurationSetSendingOptionsResponse putConfigurationSetSendingOptions(Consumer<PutConfigurationSetSendingOptionsRequest.Builder> putConfigurationSetSendingOptionsRequest)
                                                                             throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable email sending for messages that use a particular configuration set in a specific Amazon Web Services Region.

This is a convenience which creates an instance of the PutConfigurationSetSendingOptionsRequest.Builder avoiding the need to create one manually via PutConfigurationSetSendingOptionsRequest.builder()

Parameters:

putConfigurationSetSendingOptionsRequest - A Consumer that will call methods on PutConfigurationSetSendingOptionsRequest.Builder to create a request. A request to enable or disable the ability of Amazon SES to send emails that use a specific configuration set.

Returns:

Result of the PutConfigurationSetSendingOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetSuppressionOptions

default PutConfigurationSetSuppressionOptionsResponse putConfigurationSetSuppressionOptions(PutConfigurationSetSuppressionOptionsRequest putConfigurationSetSuppressionOptionsRequest)
                                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Specify the account suppression list preferences for a configuration set.

Parameters:

putConfigurationSetSuppressionOptionsRequest - A request to change the account suppression list preferences for a specific configuration set.

Returns:

Result of the PutConfigurationSetSuppressionOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetSuppressionOptions

default PutConfigurationSetSuppressionOptionsResponse putConfigurationSetSuppressionOptions(Consumer<PutConfigurationSetSuppressionOptionsRequest.Builder> putConfigurationSetSuppressionOptionsRequest)
                                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Specify the account suppression list preferences for a configuration set.

This is a convenience which creates an instance of the PutConfigurationSetSuppressionOptionsRequest.Builder avoiding the need to create one manually via PutConfigurationSetSuppressionOptionsRequest.builder()

Parameters:

putConfigurationSetSuppressionOptionsRequest - A Consumer that will call methods on PutConfigurationSetSuppressionOptionsRequest.Builder to create a request. A request to change the account suppression list preferences for a specific configuration set.

Returns:

Result of the PutConfigurationSetSuppressionOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetTrackingOptions

default PutConfigurationSetTrackingOptionsResponse putConfigurationSetTrackingOptions(PutConfigurationSetTrackingOptionsRequest putConfigurationSetTrackingOptionsRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Specify a custom domain to use for open and click tracking elements in email that you send.

Parameters:

putConfigurationSetTrackingOptionsRequest - A request to add a custom domain for tracking open and click events to a configuration set.

Returns:

Result of the PutConfigurationSetTrackingOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetTrackingOptions

default PutConfigurationSetTrackingOptionsResponse putConfigurationSetTrackingOptions(Consumer<PutConfigurationSetTrackingOptionsRequest.Builder> putConfigurationSetTrackingOptionsRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Specify a custom domain to use for open and click tracking elements in email that you send.

This is a convenience which creates an instance of the PutConfigurationSetTrackingOptionsRequest.Builder avoiding the need to create one manually via PutConfigurationSetTrackingOptionsRequest.builder()

Parameters:

putConfigurationSetTrackingOptionsRequest - A Consumer that will call methods on PutConfigurationSetTrackingOptionsRequest.Builder to create a request. A request to add a custom domain for tracking open and click events to a configuration set.

Returns:

Result of the PutConfigurationSetTrackingOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetVdmOptions

default PutConfigurationSetVdmOptionsResponse putConfigurationSetVdmOptions(PutConfigurationSetVdmOptionsRequest putConfigurationSetVdmOptionsRequest)
                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Specify VDM preferences for email that you send using the configuration set.

You can execute this operation no more than once per second.

Parameters:

putConfigurationSetVdmOptionsRequest - A request to add specific VDM settings to a configuration set.

Returns:

Result of the PutConfigurationSetVdmOptions operation returned by the service.

See Also:

• AWS API Documentation

putConfigurationSetVdmOptions

default PutConfigurationSetVdmOptionsResponse putConfigurationSetVdmOptions(Consumer<PutConfigurationSetVdmOptionsRequest.Builder> putConfigurationSetVdmOptionsRequest)
                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Specify VDM preferences for email that you send using the configuration set.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the PutConfigurationSetVdmOptionsRequest.Builder avoiding the need to create one manually via PutConfigurationSetVdmOptionsRequest.builder()

Parameters:

putConfigurationSetVdmOptionsRequest - A Consumer that will call methods on PutConfigurationSetVdmOptionsRequest.Builder to create a request. A request to add specific VDM settings to a configuration set.

Returns:

Result of the PutConfigurationSetVdmOptions operation returned by the service.

See Also:

• AWS API Documentation

putDedicatedIpInPool

default PutDedicatedIpInPoolResponse putDedicatedIpInPool(PutDedicatedIpInPoolRequest putDedicatedIpInPoolRequest)
                                                   throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Move a dedicated IP address to an existing dedicated IP pool.

The dedicated IP address that you specify must already exist, and must be associated with your Amazon Web Services account.

The dedicated IP pool you specify must already exist. You can create a new pool by using the CreateDedicatedIpPool operation.

Parameters:

putDedicatedIpInPoolRequest - A request to move a dedicated IP address to a dedicated IP pool.

Returns:

Result of the PutDedicatedIpInPool operation returned by the service.

See Also:

• AWS API Documentation

putDedicatedIpInPool

default PutDedicatedIpInPoolResponse putDedicatedIpInPool(Consumer<PutDedicatedIpInPoolRequest.Builder> putDedicatedIpInPoolRequest)
                                                   throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Move a dedicated IP address to an existing dedicated IP pool.

The dedicated IP address that you specify must already exist, and must be associated with your Amazon Web Services account.

The dedicated IP pool you specify must already exist. You can create a new pool by using the CreateDedicatedIpPool operation.

This is a convenience which creates an instance of the PutDedicatedIpInPoolRequest.Builder avoiding the need to create one manually via PutDedicatedIpInPoolRequest.builder()

Parameters:

putDedicatedIpInPoolRequest - A Consumer that will call methods on PutDedicatedIpInPoolRequest.Builder to create a request. A request to move a dedicated IP address to a dedicated IP pool.

Returns:

Result of the PutDedicatedIpInPool operation returned by the service.

See Also:

• AWS API Documentation

putDedicatedIpPoolScalingAttributes

default PutDedicatedIpPoolScalingAttributesResponse putDedicatedIpPoolScalingAttributes(PutDedicatedIpPoolScalingAttributesRequest putDedicatedIpPoolScalingAttributesRequest)
                                                                                 throws NotFoundException,
ConcurrentModificationException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to convert a dedicated IP pool to a different scaling mode.

MANAGED pools cannot be converted to STANDARD scaling mode.

Parameters:

putDedicatedIpPoolScalingAttributesRequest - A request to convert a dedicated IP pool to a different scaling mode.

Returns:

Result of the PutDedicatedIpPoolScalingAttributes operation returned by the service.

See Also:

• AWS API Documentation

putDedicatedIpPoolScalingAttributes

default PutDedicatedIpPoolScalingAttributesResponse putDedicatedIpPoolScalingAttributes(Consumer<PutDedicatedIpPoolScalingAttributesRequest.Builder> putDedicatedIpPoolScalingAttributesRequest)
                                                                                 throws NotFoundException,
ConcurrentModificationException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to convert a dedicated IP pool to a different scaling mode.

MANAGED pools cannot be converted to STANDARD scaling mode.

This is a convenience which creates an instance of the PutDedicatedIpPoolScalingAttributesRequest.Builder avoiding the need to create one manually via PutDedicatedIpPoolScalingAttributesRequest.builder()

Parameters:

putDedicatedIpPoolScalingAttributesRequest - A Consumer that will call methods on PutDedicatedIpPoolScalingAttributesRequest.Builder to create a request. A request to convert a dedicated IP pool to a different scaling mode.

Returns:

Result of the PutDedicatedIpPoolScalingAttributes operation returned by the service.

See Also:

• AWS API Documentation

putDedicatedIpWarmupAttributes

default PutDedicatedIpWarmupAttributesResponse putDedicatedIpWarmupAttributes(PutDedicatedIpWarmupAttributesRequest putDedicatedIpWarmupAttributesRequest)
                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Parameters:

putDedicatedIpWarmupAttributesRequest - A request to change the warm-up attributes for a dedicated IP address. This operation is useful when you want to resume the warm-up process for an existing IP address.

Returns:

Result of the PutDedicatedIpWarmupAttributes operation returned by the service.

See Also:

• AWS API Documentation

putDedicatedIpWarmupAttributes

default PutDedicatedIpWarmupAttributesResponse putDedicatedIpWarmupAttributes(Consumer<PutDedicatedIpWarmupAttributesRequest.Builder> putDedicatedIpWarmupAttributesRequest)
                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

This is a convenience which creates an instance of the PutDedicatedIpWarmupAttributesRequest.Builder avoiding the need to create one manually via PutDedicatedIpWarmupAttributesRequest.builder()

Parameters:

putDedicatedIpWarmupAttributesRequest - A Consumer that will call methods on PutDedicatedIpWarmupAttributesRequest.Builder to create a request. A request to change the warm-up attributes for a dedicated IP address. This operation is useful when you want to resume the warm-up process for an existing IP address.

Returns:

Result of the PutDedicatedIpWarmupAttributes operation returned by the service.

See Also:

• AWS API Documentation

putDeliverabilityDashboardOption

default PutDeliverabilityDashboardOptionResponse putDeliverabilityDashboardOption(PutDeliverabilityDashboardOptionRequest putDeliverabilityDashboardOptionRequest)
                                                                           throws AlreadyExistsException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable the Deliverability dashboard. When you enable the Deliverability dashboard, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon SES Pricing.

Parameters:

putDeliverabilityDashboardOptionRequest - Enable or disable the Deliverability dashboard. When you enable the Deliverability dashboard, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email using Amazon SES API v2. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.

Returns:

Result of the PutDeliverabilityDashboardOption operation returned by the service.

See Also:

• AWS API Documentation

putDeliverabilityDashboardOption

default PutDeliverabilityDashboardOptionResponse putDeliverabilityDashboardOption(Consumer<PutDeliverabilityDashboardOptionRequest.Builder> putDeliverabilityDashboardOptionRequest)
                                                                           throws AlreadyExistsException,
NotFoundException,
TooManyRequestsException,
LimitExceededException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Enable or disable the Deliverability dashboard. When you enable the Deliverability dashboard, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon SES Pricing.

This is a convenience which creates an instance of the PutDeliverabilityDashboardOptionRequest.Builder avoiding the need to create one manually via PutDeliverabilityDashboardOptionRequest.builder()

Parameters:

putDeliverabilityDashboardOptionRequest - A Consumer that will call methods on PutDeliverabilityDashboardOptionRequest.Builder to create a request. Enable or disable the Deliverability dashboard. When you enable the Deliverability dashboard, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email using Amazon SES API v2. You also gain the ability to perform predictive inbox placement tests.

When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.

Returns:

Result of the PutDeliverabilityDashboardOption operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityConfigurationSetAttributes

default PutEmailIdentityConfigurationSetAttributesResponse putEmailIdentityConfigurationSetAttributes(PutEmailIdentityConfigurationSetAttributesRequest putEmailIdentityConfigurationSetAttributesRequest)
                                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to associate a configuration set with an email identity.

Parameters:

putEmailIdentityConfigurationSetAttributesRequest - A request to associate a configuration set with an email identity.

Returns:

Result of the PutEmailIdentityConfigurationSetAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityConfigurationSetAttributes

default PutEmailIdentityConfigurationSetAttributesResponse putEmailIdentityConfigurationSetAttributes(Consumer<PutEmailIdentityConfigurationSetAttributesRequest.Builder> putEmailIdentityConfigurationSetAttributesRequest)
                                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to associate a configuration set with an email identity.

This is a convenience which creates an instance of the PutEmailIdentityConfigurationSetAttributesRequest.Builder avoiding the need to create one manually via PutEmailIdentityConfigurationSetAttributesRequest.builder()

Parameters:

putEmailIdentityConfigurationSetAttributesRequest - A Consumer that will call methods on PutEmailIdentityConfigurationSetAttributesRequest.Builder to create a request. A request to associate a configuration set with an email identity.

Returns:

Result of the PutEmailIdentityConfigurationSetAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityDkimAttributes

default PutEmailIdentityDkimAttributesResponse putEmailIdentityDkimAttributes(PutEmailIdentityDkimAttributesRequest putEmailIdentityDkimAttributesRequest)
                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to enable or disable DKIM authentication for an email identity.

Parameters:

putEmailIdentityDkimAttributesRequest - A request to enable or disable DKIM signing of email that you send from an email identity.

Returns:

Result of the PutEmailIdentityDkimAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityDkimAttributes

default PutEmailIdentityDkimAttributesResponse putEmailIdentityDkimAttributes(Consumer<PutEmailIdentityDkimAttributesRequest.Builder> putEmailIdentityDkimAttributesRequest)
                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to enable or disable DKIM authentication for an email identity.

This is a convenience which creates an instance of the PutEmailIdentityDkimAttributesRequest.Builder avoiding the need to create one manually via PutEmailIdentityDkimAttributesRequest.builder()

Parameters:

putEmailIdentityDkimAttributesRequest - A Consumer that will call methods on PutEmailIdentityDkimAttributesRequest.Builder to create a request. A request to enable or disable DKIM signing of email that you send from an email identity.

Returns:

Result of the PutEmailIdentityDkimAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityDkimSigningAttributes

default PutEmailIdentityDkimSigningAttributesResponse putEmailIdentityDkimSigningAttributes(PutEmailIdentityDkimSigningAttributesRequest putEmailIdentityDkimSigningAttributesRequest)
                                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to configure or change the DKIM authentication settings for an email domain identity. You can use this operation to do any of the following:

• Update the signing attributes for an identity that uses Bring Your Own DKIM (BYODKIM).

• Update the key length that should be used for Easy DKIM.

• Change from using no DKIM authentication to using Easy DKIM.

• Change from using no DKIM authentication to using BYODKIM.

• Change from using Easy DKIM to using BYODKIM.

• Change from using BYODKIM to using Easy DKIM.

Parameters:

putEmailIdentityDkimSigningAttributesRequest - A request to change the DKIM attributes for an email identity.

Returns:

Result of the PutEmailIdentityDkimSigningAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityDkimSigningAttributes

default PutEmailIdentityDkimSigningAttributesResponse putEmailIdentityDkimSigningAttributes(Consumer<PutEmailIdentityDkimSigningAttributesRequest.Builder> putEmailIdentityDkimSigningAttributesRequest)
                                                                                     throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to configure or change the DKIM authentication settings for an email domain identity. You can use this operation to do any of the following:

• Update the signing attributes for an identity that uses Bring Your Own DKIM (BYODKIM).

• Update the key length that should be used for Easy DKIM.

• Change from using no DKIM authentication to using Easy DKIM.

• Change from using no DKIM authentication to using BYODKIM.

• Change from using Easy DKIM to using BYODKIM.

• Change from using BYODKIM to using Easy DKIM.

This is a convenience which creates an instance of the PutEmailIdentityDkimSigningAttributesRequest.Builder avoiding the need to create one manually via PutEmailIdentityDkimSigningAttributesRequest.builder()

Parameters:

putEmailIdentityDkimSigningAttributesRequest - A Consumer that will call methods on PutEmailIdentityDkimSigningAttributesRequest.Builder to create a request. A request to change the DKIM attributes for an email identity.

Returns:

Result of the PutEmailIdentityDkimSigningAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityFeedbackAttributes

default PutEmailIdentityFeedbackAttributesResponse putEmailIdentityFeedbackAttributes(PutEmailIdentityFeedbackAttributesRequest putEmailIdentityFeedbackAttributesRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to enable or disable feedback forwarding for an identity. This setting determines what happens when an identity is used to send an email that results in a bounce or complaint event.

If the value is true, you receive email notifications when bounce or complaint events occur. These notifications are sent to the address that you specified in the Return-Path header of the original email.

You're required to have a method of tracking bounces and complaints. If you haven't set up another mechanism for receiving bounce or complaint notifications (for example, by setting up an event destination), you receive an email notification when these events occur (even if this setting is disabled).

Parameters:

putEmailIdentityFeedbackAttributesRequest - A request to set the attributes that control how bounce and complaint events are processed.

Returns:

Result of the PutEmailIdentityFeedbackAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityFeedbackAttributes

default PutEmailIdentityFeedbackAttributesResponse putEmailIdentityFeedbackAttributes(Consumer<PutEmailIdentityFeedbackAttributesRequest.Builder> putEmailIdentityFeedbackAttributesRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to enable or disable feedback forwarding for an identity. This setting determines what happens when an identity is used to send an email that results in a bounce or complaint event.

If the value is true, you receive email notifications when bounce or complaint events occur. These notifications are sent to the address that you specified in the Return-Path header of the original email.

You're required to have a method of tracking bounces and complaints. If you haven't set up another mechanism for receiving bounce or complaint notifications (for example, by setting up an event destination), you receive an email notification when these events occur (even if this setting is disabled).

This is a convenience which creates an instance of the PutEmailIdentityFeedbackAttributesRequest.Builder avoiding the need to create one manually via PutEmailIdentityFeedbackAttributesRequest.builder()

Parameters:

putEmailIdentityFeedbackAttributesRequest - A Consumer that will call methods on PutEmailIdentityFeedbackAttributesRequest.Builder to create a request. A request to set the attributes that control how bounce and complaint events are processed.

Returns:

Result of the PutEmailIdentityFeedbackAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityMailFromAttributes

default PutEmailIdentityMailFromAttributesResponse putEmailIdentityMailFromAttributes(PutEmailIdentityMailFromAttributesRequest putEmailIdentityMailFromAttributesRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to enable or disable the custom Mail-From domain configuration for an email identity.

Parameters:

putEmailIdentityMailFromAttributesRequest - A request to configure the custom MAIL FROM domain for a verified identity.

Returns:

Result of the PutEmailIdentityMailFromAttributes operation returned by the service.

See Also:

• AWS API Documentation

putEmailIdentityMailFromAttributes

default PutEmailIdentityMailFromAttributesResponse putEmailIdentityMailFromAttributes(Consumer<PutEmailIdentityMailFromAttributesRequest.Builder> putEmailIdentityMailFromAttributesRequest)
                                                                               throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Used to enable or disable the custom Mail-From domain configuration for an email identity.

This is a convenience which creates an instance of the PutEmailIdentityMailFromAttributesRequest.Builder avoiding the need to create one manually via PutEmailIdentityMailFromAttributesRequest.builder()

Parameters:

putEmailIdentityMailFromAttributesRequest - A Consumer that will call methods on PutEmailIdentityMailFromAttributesRequest.Builder to create a request. A request to configure the custom MAIL FROM domain for a verified identity.

Returns:

Result of the PutEmailIdentityMailFromAttributes operation returned by the service.

See Also:

• AWS API Documentation

putSuppressedDestination

default PutSuppressedDestinationResponse putSuppressedDestination(PutSuppressedDestinationRequest putSuppressedDestinationRequest)
                                                           throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Adds an email address to the suppression list for your account.

Parameters:

putSuppressedDestinationRequest - A request to add an email destination to the suppression list for your account.

Returns:

Result of the PutSuppressedDestination operation returned by the service.

See Also:

• AWS API Documentation

putSuppressedDestination

default PutSuppressedDestinationResponse putSuppressedDestination(Consumer<PutSuppressedDestinationRequest.Builder> putSuppressedDestinationRequest)
                                                           throws BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Adds an email address to the suppression list for your account.

This is a convenience which creates an instance of the PutSuppressedDestinationRequest.Builder avoiding the need to create one manually via PutSuppressedDestinationRequest.builder()

Parameters:

putSuppressedDestinationRequest - A Consumer that will call methods on PutSuppressedDestinationRequest.Builder to create a request. A request to add an email destination to the suppression list for your account.

Returns:

Result of the PutSuppressedDestination operation returned by the service.

See Also:

• AWS API Documentation

sendBulkEmail

default SendBulkEmailResponse sendBulkEmail(SendBulkEmailRequest sendBulkEmailRequest)
                                     throws TooManyRequestsException,
LimitExceededException,
AccountSuspendedException,
SendingPausedException,
MessageRejectedException,
MailFromDomainNotVerifiedException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Composes an email message to multiple destinations.

Parameters:

sendBulkEmailRequest - Represents a request to send email messages to multiple destinations using Amazon SES. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the SendBulkEmail operation returned by the service.

See Also:

• AWS API Documentation

sendBulkEmail

default SendBulkEmailResponse sendBulkEmail(Consumer<SendBulkEmailRequest.Builder> sendBulkEmailRequest)
                                     throws TooManyRequestsException,
LimitExceededException,
AccountSuspendedException,
SendingPausedException,
MessageRejectedException,
MailFromDomainNotVerifiedException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Composes an email message to multiple destinations.

This is a convenience which creates an instance of the SendBulkEmailRequest.Builder avoiding the need to create one manually via SendBulkEmailRequest.builder()

Parameters:

sendBulkEmailRequest - A Consumer that will call methods on SendBulkEmailRequest.Builder to create a request. Represents a request to send email messages to multiple destinations using Amazon SES. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the SendBulkEmail operation returned by the service.

See Also:

• AWS API Documentation

sendCustomVerificationEmail

default SendCustomVerificationEmailResponse sendCustomVerificationEmail(SendCustomVerificationEmailRequest sendCustomVerificationEmailRequest)
                                                                 throws TooManyRequestsException,
LimitExceededException,
MessageRejectedException,
SendingPausedException,
MailFromDomainNotVerifiedException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address.

To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

sendCustomVerificationEmailRequest - Represents a request to send a custom verification email to a specified recipient.

Returns:

Result of the SendCustomVerificationEmail operation returned by the service.

See Also:

• AWS API Documentation

sendCustomVerificationEmail

default SendCustomVerificationEmailResponse sendCustomVerificationEmail(Consumer<SendCustomVerificationEmailRequest.Builder> sendCustomVerificationEmailRequest)
                                                                 throws TooManyRequestsException,
LimitExceededException,
MessageRejectedException,
SendingPausedException,
MailFromDomainNotVerifiedException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Adds an email address to the list of identities for your Amazon SES account in the current Amazon Web Services Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address.

To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the SendCustomVerificationEmailRequest.Builder avoiding the need to create one manually via SendCustomVerificationEmailRequest.builder()

Parameters:

sendCustomVerificationEmailRequest - A Consumer that will call methods on SendCustomVerificationEmailRequest.Builder to create a request. Represents a request to send a custom verification email to a specified recipient.

Returns:

Result of the SendCustomVerificationEmail operation returned by the service.

See Also:

• AWS API Documentation

sendEmail

default SendEmailResponse sendEmail(SendEmailRequest sendEmailRequest)
                             throws TooManyRequestsException,
LimitExceededException,
AccountSuspendedException,
SendingPausedException,
MessageRejectedException,
MailFromDomainNotVerifiedException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Sends an email message. You can use the Amazon SES API v2 to send the following types of messages:

• Simple – A standard email message. When you create this type of message, you specify the sender, the recipient, and the message body, and Amazon SES assembles the message for you.

• Raw – A raw, MIME-formatted email message. When you send this type of email, you have to specify all of the message headers, as well as the message body. You can use this message type to send messages that contain attachments. The message that you specify has to be a valid MIME message.

• Templated – A message that contains personalization tags. When you send this type of email, Amazon SES API v2 automatically replaces the tags with values that you specify.

Parameters:

sendEmailRequest - Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the SendEmail operation returned by the service.

See Also:

• AWS API Documentation

sendEmail

default SendEmailResponse sendEmail(Consumer<SendEmailRequest.Builder> sendEmailRequest)
                             throws TooManyRequestsException,
LimitExceededException,
AccountSuspendedException,
SendingPausedException,
MessageRejectedException,
MailFromDomainNotVerifiedException,
NotFoundException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Sends an email message. You can use the Amazon SES API v2 to send the following types of messages:

• Simple – A standard email message. When you create this type of message, you specify the sender, the recipient, and the message body, and Amazon SES assembles the message for you.

• Raw – A raw, MIME-formatted email message. When you send this type of email, you have to specify all of the message headers, as well as the message body. You can use this message type to send messages that contain attachments. The message that you specify has to be a valid MIME message.

• Templated – A message that contains personalization tags. When you send this type of email, Amazon SES API v2 automatically replaces the tags with values that you specify.

This is a convenience which creates an instance of the SendEmailRequest.Builder avoiding the need to create one manually via SendEmailRequest.builder()

Parameters:

sendEmailRequest - A Consumer that will call methods on SendEmailRequest.Builder to create a request. Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the SendEmail operation returned by the service.

See Also:

• AWS API Documentation

tagResource

default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws BadRequestException,
ConcurrentModificationException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Add one or more tags (keys and values) to a specified resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags.

Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.

Parameters:

tagResourceRequest -

Returns:

Result of the TagResource operation returned by the service.

See Also:

• AWS API Documentation

tagResource

default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws BadRequestException,
ConcurrentModificationException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Add one or more tags (keys and values) to a specified resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags.

Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.

This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()

Parameters:

tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.

Returns:

Result of the TagResource operation returned by the service.

See Also:

• AWS API Documentation

testRenderEmailTemplate

default TestRenderEmailTemplateResponse testRenderEmailTemplate(TestRenderEmailTemplateRequest testRenderEmailTemplateRequest)
                                                         throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.

You can execute this operation no more than once per second.

Parameters:

testRenderEmailTemplateRequest - >Represents a request to create a preview of the MIME content of an email when provided with a template and a set of replacement data.

Returns:

Result of the TestRenderEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

testRenderEmailTemplate

default TestRenderEmailTemplateResponse testRenderEmailTemplate(Consumer<TestRenderEmailTemplateRequest.Builder> testRenderEmailTemplateRequest)
                                                         throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Creates a preview of the MIME content of an email when provided with a template and a set of replacement data.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the TestRenderEmailTemplateRequest.Builder avoiding the need to create one manually via TestRenderEmailTemplateRequest.builder()

Parameters:

testRenderEmailTemplateRequest - A Consumer that will call methods on TestRenderEmailTemplateRequest.Builder to create a request. >Represents a request to create a preview of the MIME content of an email when provided with a template and a set of replacement data.

Returns:

Result of the TestRenderEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

untagResource

default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws BadRequestException,
ConcurrentModificationException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Remove one or more tags (keys and values) from a specified resource.

Parameters:

untagResourceRequest -

Returns:

Result of the UntagResource operation returned by the service.

See Also:

• AWS API Documentation

untagResource

default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws BadRequestException,
ConcurrentModificationException,
NotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Remove one or more tags (keys and values) from a specified resource.

This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()

Parameters:

untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.

Returns:

Result of the UntagResource operation returned by the service.

See Also:

• AWS API Documentation

updateConfigurationSetEventDestination

default UpdateConfigurationSetEventDestinationResponse updateConfigurationSetEventDestination(UpdateConfigurationSetEventDestinationRequest updateConfigurationSetEventDestinationRequest)
                                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Update the configuration of an event destination for a configuration set.

Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

Parameters:

updateConfigurationSetEventDestinationRequest - A request to change the settings for an event destination for a configuration set.

Returns:

Result of the UpdateConfigurationSetEventDestination operation returned by the service.

See Also:

• AWS API Documentation

updateConfigurationSetEventDestination

default UpdateConfigurationSetEventDestinationResponse updateConfigurationSetEventDestination(Consumer<UpdateConfigurationSetEventDestinationRequest.Builder> updateConfigurationSetEventDestinationRequest)
                                                                                       throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Update the configuration of an event destination for a configuration set.

Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon EventBridge and associate a rule to send the event to the specified target.

This is a convenience which creates an instance of the UpdateConfigurationSetEventDestinationRequest.Builder avoiding the need to create one manually via UpdateConfigurationSetEventDestinationRequest.builder()

Parameters:

updateConfigurationSetEventDestinationRequest - A Consumer that will call methods on UpdateConfigurationSetEventDestinationRequest.Builder to create a request. A request to change the settings for an event destination for a configuration set.

Returns:

Result of the UpdateConfigurationSetEventDestination operation returned by the service.

See Also:

• AWS API Documentation

updateContact

default UpdateContactResponse updateContact(UpdateContactRequest updateContactRequest)
                                     throws BadRequestException,
TooManyRequestsException,
NotFoundException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates a contact's preferences for a list.

You must specify all existing topic preferences in the TopicPreferences object, not just the ones that need updating; otherwise, all your existing preferences will be removed.

Parameters:

updateContactRequest -

Returns:

Result of the UpdateContact operation returned by the service.

See Also:

• AWS API Documentation

updateContact

default UpdateContactResponse updateContact(Consumer<UpdateContactRequest.Builder> updateContactRequest)
                                     throws BadRequestException,
TooManyRequestsException,
NotFoundException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates a contact's preferences for a list.

You must specify all existing topic preferences in the TopicPreferences object, not just the ones that need updating; otherwise, all your existing preferences will be removed.

This is a convenience which creates an instance of the UpdateContactRequest.Builder avoiding the need to create one manually via UpdateContactRequest.builder()

Parameters:

updateContactRequest - A Consumer that will call methods on UpdateContactRequest.Builder to create a request.

Returns:

Result of the UpdateContact operation returned by the service.

See Also:

• AWS API Documentation

updateContactList

default UpdateContactListResponse updateContactList(UpdateContactListRequest updateContactListRequest)
                                             throws BadRequestException,
TooManyRequestsException,
NotFoundException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates contact list metadata. This operation does a complete replacement.

Parameters:

updateContactListRequest -

Returns:

Result of the UpdateContactList operation returned by the service.

See Also:

• AWS API Documentation

updateContactList

default UpdateContactListResponse updateContactList(Consumer<UpdateContactListRequest.Builder> updateContactListRequest)
                                             throws BadRequestException,
TooManyRequestsException,
NotFoundException,
ConcurrentModificationException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates contact list metadata. This operation does a complete replacement.

This is a convenience which creates an instance of the UpdateContactListRequest.Builder avoiding the need to create one manually via UpdateContactListRequest.builder()

Parameters:

updateContactListRequest - A Consumer that will call methods on UpdateContactListRequest.Builder to create a request.

Returns:

Result of the UpdateContactList operation returned by the service.

See Also:

• AWS API Documentation

updateCustomVerificationEmailTemplate

default UpdateCustomVerificationEmailTemplateResponse updateCustomVerificationEmailTemplate(UpdateCustomVerificationEmailTemplateRequest updateCustomVerificationEmailTemplateRequest)
                                                                                     throws NotFoundException,
BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates an existing custom verification email template.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

updateCustomVerificationEmailTemplateRequest - Represents a request to update an existing custom verification email template.

Returns:

Result of the UpdateCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

updateCustomVerificationEmailTemplate

default UpdateCustomVerificationEmailTemplateResponse updateCustomVerificationEmailTemplate(Consumer<UpdateCustomVerificationEmailTemplateRequest.Builder> updateCustomVerificationEmailTemplateRequest)
                                                                                     throws NotFoundException,
BadRequestException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates an existing custom verification email template.

For more information about custom verification email templates, see Using custom verification email templates in the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the UpdateCustomVerificationEmailTemplateRequest.Builder avoiding the need to create one manually via UpdateCustomVerificationEmailTemplateRequest.builder()

Parameters:

updateCustomVerificationEmailTemplateRequest - A Consumer that will call methods on UpdateCustomVerificationEmailTemplateRequest.Builder to create a request. Represents a request to update an existing custom verification email template.

Returns:

Result of the UpdateCustomVerificationEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

updateEmailIdentityPolicy

default UpdateEmailIdentityPolicyResponse updateEmailIdentityPolicy(UpdateEmailIdentityPolicyRequest updateEmailIdentityPolicyRequest)
                                                             throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

updateEmailIdentityPolicyRequest - Represents a request to update a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Returns:

Result of the UpdateEmailIdentityPolicy operation returned by the service.

See Also:

• AWS API Documentation

updateEmailIdentityPolicy

default UpdateEmailIdentityPolicyResponse updateEmailIdentityPolicy(Consumer<UpdateEmailIdentityPolicyRequest.Builder> updateEmailIdentityPolicyRequest)
                                                             throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist.

This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the UpdateEmailIdentityPolicyRequest.Builder avoiding the need to create one manually via UpdateEmailIdentityPolicyRequest.builder()

Parameters:

updateEmailIdentityPolicyRequest - A Consumer that will call methods on UpdateEmailIdentityPolicyRequest.Builder to create a request. Represents a request to update a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Returns:

Result of the UpdateEmailIdentityPolicy operation returned by the service.

See Also:

• AWS API Documentation

updateEmailTemplate

default UpdateEmailTemplateResponse updateEmailTemplate(UpdateEmailTemplateRequest updateEmailTemplateRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

Parameters:

updateEmailTemplateRequest - Represents a request to update an email template. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the UpdateEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

updateEmailTemplate

default UpdateEmailTemplateResponse updateEmailTemplate(Consumer<UpdateEmailTemplateRequest.Builder> updateEmailTemplateRequest)
                                                 throws NotFoundException,
TooManyRequestsException,
BadRequestException,
AwsServiceException,
SdkClientException,
SesV2Exception

Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

This is a convenience which creates an instance of the UpdateEmailTemplateRequest.Builder avoiding the need to create one manually via UpdateEmailTemplateRequest.builder()

Parameters:

updateEmailTemplateRequest - A Consumer that will call methods on UpdateEmailTemplateRequest.Builder to create a request. Represents a request to update an email template. For more information, see the Amazon SES Developer Guide.

Returns:

Result of the UpdateEmailTemplate operation returned by the service.

See Also:

• AWS API Documentation

create

static SesV2Client create()

Create a SesV2Client with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

builder

static SesV2ClientBuilder builder()

Create a builder that can be used to configure and create a SesV2Client.

serviceMetadata

static ServiceMetadata serviceMetadata()

serviceClientConfiguration

default SesV2ServiceClientConfiguration serviceClientConfiguration()

Description copied from interface: SdkClient

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

Specified by:

serviceClientConfiguration in interface AwsClient

Specified by:

serviceClientConfiguration in interface SdkClient

Returns:

SdkServiceClientConfiguration