Interface NetworkMonitorClient

All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface NetworkMonitorClient
extends AwsClient

Service client for accessing Amazon CloudWatch Network Monitor. This can be created using the static builder() method.

Amazon CloudWatch Network Monitor is an Amazon Web Services active network monitoring service that identifies if a network issues exists within the Amazon Web Services network or your own company network. Within Network Monitor you'll choose the source VPCs and subnets from the Amazon Web Services network in which you operate and then you'll choose the destination IP addresses from your on-premises network. From these sources and destinations, Network Monitor creates a monitor containing all the possible source and destination combinations, each of which is called a probe, within a single monitor. These probes then monitor network traffic to help you identify where network issues might be affecting your traffic.

Before you begin, ensure the Amazon Web Services CLI is configured in the Amazon Web Services Account where you will create the Network Monitor resource. Network Monitor doesn’t support creation on cross-account resources, but you can create a Network Monitor in any subnet belonging to a VPC owned by your Account.

For more information, see Using Amazon CloudWatch Network Monitor in the Amazon CloudWatch User Guide.

Field Summary

Fields

Modifier and Type	Field	Description
static final String	SERVICE_METADATA_ID	Value for looking up the service's metadata from the ServiceMetadataProvider.
static final String	SERVICE_NAME

Method Summary

Modifier and Type	Method	Description
static NetworkMonitorClientBuilder	builder()	Create a builder that can be used to configure and create a NetworkMonitorClient.
static NetworkMonitorClient	create()	Create a NetworkMonitorClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
default CreateMonitorResponse	createMonitor(Consumer<CreateMonitorRequest.Builder> createMonitorRequest)	Creates a monitor between a source subnet and destination IP address.
default CreateMonitorResponse	createMonitor(CreateMonitorRequest createMonitorRequest)	Creates a monitor between a source subnet and destination IP address.
default CreateProbeResponse	createProbe(Consumer<CreateProbeRequest.Builder> createProbeRequest)	Create a probe within a monitor.
default CreateProbeResponse	createProbe(CreateProbeRequest createProbeRequest)	Create a probe within a monitor.
default DeleteMonitorResponse	deleteMonitor(Consumer<DeleteMonitorRequest.Builder> deleteMonitorRequest)	Deletes a specified monitor.
default DeleteMonitorResponse	deleteMonitor(DeleteMonitorRequest deleteMonitorRequest)	Deletes a specified monitor.
default DeleteProbeResponse	deleteProbe(Consumer<DeleteProbeRequest.Builder> deleteProbeRequest)	Deletes the specified probe.
default DeleteProbeResponse	deleteProbe(DeleteProbeRequest deleteProbeRequest)	Deletes the specified probe.
default GetMonitorResponse	getMonitor(Consumer<GetMonitorRequest.Builder> getMonitorRequest)	Returns details about a specific monitor.
default GetMonitorResponse	getMonitor(GetMonitorRequest getMonitorRequest)	Returns details about a specific monitor.
default GetProbeResponse	getProbe(Consumer<GetProbeRequest.Builder> getProbeRequest)	Returns the details about a probe.
default GetProbeResponse	getProbe(GetProbeRequest getProbeRequest)	Returns the details about a probe.
default ListMonitorsResponse	listMonitors(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)	Returns a list of all of your monitors.
default ListMonitorsResponse	listMonitors(ListMonitorsRequest listMonitorsRequest)	Returns a list of all of your monitors.
default ListMonitorsIterable	listMonitorsPaginator(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)	This is a variant of listMonitors(software.amazon.awssdk.services.networkmonitor.model.ListMonitorsRequest) operation.
default ListMonitorsIterable	listMonitorsPaginator(ListMonitorsRequest listMonitorsRequest)	This is a variant of listMonitors(software.amazon.awssdk.services.networkmonitor.model.ListMonitorsRequest) operation.
default ListTagsForResourceResponse	listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)	Lists the tags assigned to this resource.
default ListTagsForResourceResponse	listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)	Lists the tags assigned to this resource.
default NetworkMonitorServiceClientConfiguration	serviceClientConfiguration()	The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
static ServiceMetadata	serviceMetadata()
default TagResourceResponse	tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)	Adds key-value pairs to a monitor or probe.
default TagResourceResponse	tagResource(TagResourceRequest tagResourceRequest)	Adds key-value pairs to a monitor or probe.
default UntagResourceResponse	untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)	Removes a key-value pair from a monitor or probe.
default UntagResourceResponse	untagResource(UntagResourceRequest untagResourceRequest)	Removes a key-value pair from a monitor or probe.
default UpdateMonitorResponse	updateMonitor(Consumer<UpdateMonitorRequest.Builder> updateMonitorRequest)	Updates the aggregationPeriod for a monitor.
default UpdateMonitorResponse	updateMonitor(UpdateMonitorRequest updateMonitorRequest)	Updates the aggregationPeriod for a monitor.
default UpdateProbeResponse	updateProbe(Consumer<UpdateProbeRequest.Builder> updateProbeRequest)	Updates a monitor probe.
default UpdateProbeResponse	updateProbe(UpdateProbeRequest updateProbeRequest)	Updates a monitor probe.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

close

Methods inherited from interface software.amazon.awssdk.core.SdkClient

serviceName

Field Details

SERVICE_NAME

static final String SERVICE_NAME

See Also:

• Constant Field Values

SERVICE_METADATA_ID

static final String SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

See Also:

• Constant Field Values

Method Details

createMonitor

default CreateMonitorResponse createMonitor(CreateMonitorRequest createMonitorRequest)
                                     throws AccessDeniedException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Creates a monitor between a source subnet and destination IP address. Within a monitor you'll create one or more probes that monitor network traffic between your source Amazon Web Services VPC subnets and your destination IP addresses. Each probe then aggregates and sends metrics to Amazon CloudWatch.

You can also create a monitor with probes using this command. For each probe, you define the following:

• source—The subnet IDs where the probes will be created.

• destination— The target destination IP address for the probe.

• destinationPort—Required only if the protocol is TCP.

• protocol—The communication protocol between the source and destination. This will be either TCP or ICMP.

• packetSize—The size of the packets. This must be a number between 56 and 8500.

• (Optional) tags —Key-value pairs created and assigned to the probe.

Parameters:

createMonitorRequest -

Returns:

Result of the CreateMonitor operation returned by the service.

See Also:

• AWS API Documentation

createMonitor

default CreateMonitorResponse createMonitor(Consumer<CreateMonitorRequest.Builder> createMonitorRequest)
                                     throws AccessDeniedException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Creates a monitor between a source subnet and destination IP address. Within a monitor you'll create one or more probes that monitor network traffic between your source Amazon Web Services VPC subnets and your destination IP addresses. Each probe then aggregates and sends metrics to Amazon CloudWatch.

You can also create a monitor with probes using this command. For each probe, you define the following:

• source—The subnet IDs where the probes will be created.

• destination— The target destination IP address for the probe.

• destinationPort—Required only if the protocol is TCP.

• protocol—The communication protocol between the source and destination. This will be either TCP or ICMP.

• packetSize—The size of the packets. This must be a number between 56 and 8500.

• (Optional) tags —Key-value pairs created and assigned to the probe.

This is a convenience which creates an instance of the CreateMonitorRequest.Builder avoiding the need to create one manually via CreateMonitorRequest.builder()

Parameters:

createMonitorRequest - A Consumer that will call methods on CreateMonitorRequest.Builder to create a request.

Returns:

Result of the CreateMonitor operation returned by the service.

See Also:

• AWS API Documentation

createProbe

default CreateProbeResponse createProbe(CreateProbeRequest createProbeRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Create a probe within a monitor. Once you create a probe, and it begins monitoring your network traffic, you'll incur billing charges for that probe. This action requires the monitorName parameter. Run ListMonitors to get a list of monitor names. Note the name of the monitorName you want to create the probe for.

Parameters:

createProbeRequest -

Returns:

Result of the CreateProbe operation returned by the service.

See Also:

• AWS API Documentation

createProbe

default CreateProbeResponse createProbe(Consumer<CreateProbeRequest.Builder> createProbeRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Create a probe within a monitor. Once you create a probe, and it begins monitoring your network traffic, you'll incur billing charges for that probe. This action requires the monitorName parameter. Run ListMonitors to get a list of monitor names. Note the name of the monitorName you want to create the probe for.

This is a convenience which creates an instance of the CreateProbeRequest.Builder avoiding the need to create one manually via CreateProbeRequest.builder()

Parameters:

createProbeRequest - A Consumer that will call methods on CreateProbeRequest.Builder to create a request.

Returns:

Result of the CreateProbe operation returned by the service.

See Also:

• AWS API Documentation

deleteMonitor

default DeleteMonitorResponse deleteMonitor(DeleteMonitorRequest deleteMonitorRequest)
                                     throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Deletes a specified monitor.

This action requires the monitorName parameter. Run ListMonitors to get a list of monitor names.

Parameters:

deleteMonitorRequest -

Returns:

Result of the DeleteMonitor operation returned by the service.

See Also:

• AWS API Documentation

deleteMonitor

default DeleteMonitorResponse deleteMonitor(Consumer<DeleteMonitorRequest.Builder> deleteMonitorRequest)
                                     throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Deletes a specified monitor.

This action requires the monitorName parameter. Run ListMonitors to get a list of monitor names.

This is a convenience which creates an instance of the DeleteMonitorRequest.Builder avoiding the need to create one manually via DeleteMonitorRequest.builder()

Parameters:

deleteMonitorRequest - A Consumer that will call methods on DeleteMonitorRequest.Builder to create a request.

Returns:

Result of the DeleteMonitor operation returned by the service.

See Also:

• AWS API Documentation

deleteProbe

default DeleteProbeResponse deleteProbe(DeleteProbeRequest deleteProbeRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Deletes the specified probe. Once a probe is deleted you'll no longer incur any billing fees for that probe.

This action requires both the monitorName and probeId parameters. Run ListMonitors to get a list of monitor names. Run GetMonitor to get a list of probes and probe IDs. You can only delete a single probe at a time using this action.

Parameters:

deleteProbeRequest -

Returns:

Result of the DeleteProbe operation returned by the service.

See Also:

• AWS API Documentation

deleteProbe

default DeleteProbeResponse deleteProbe(Consumer<DeleteProbeRequest.Builder> deleteProbeRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Deletes the specified probe. Once a probe is deleted you'll no longer incur any billing fees for that probe.

This action requires both the monitorName and probeId parameters. Run ListMonitors to get a list of monitor names. Run GetMonitor to get a list of probes and probe IDs. You can only delete a single probe at a time using this action.

This is a convenience which creates an instance of the DeleteProbeRequest.Builder avoiding the need to create one manually via DeleteProbeRequest.builder()

Parameters:

deleteProbeRequest - A Consumer that will call methods on DeleteProbeRequest.Builder to create a request.

Returns:

Result of the DeleteProbe operation returned by the service.

See Also:

• AWS API Documentation

getMonitor

default GetMonitorResponse getMonitor(GetMonitorRequest getMonitorRequest)
                               throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Returns details about a specific monitor.

This action requires the monitorName parameter. Run ListMonitors to get a list of monitor names.

Parameters:

getMonitorRequest -

Returns:

Result of the GetMonitor operation returned by the service.

See Also:

• AWS API Documentation

getMonitor

default GetMonitorResponse getMonitor(Consumer<GetMonitorRequest.Builder> getMonitorRequest)
                               throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Returns details about a specific monitor.

This action requires the monitorName parameter. Run ListMonitors to get a list of monitor names.

This is a convenience which creates an instance of the GetMonitorRequest.Builder avoiding the need to create one manually via GetMonitorRequest.builder()

Parameters:

getMonitorRequest - A Consumer that will call methods on GetMonitorRequest.Builder to create a request.

Returns:

Result of the GetMonitor operation returned by the service.

See Also:

• AWS API Documentation

getProbe

default GetProbeResponse getProbe(GetProbeRequest getProbeRequest)
                           throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Returns the details about a probe. This action requires both the monitorName and probeId parameters. Run ListMonitors to get a list of monitor names. Run GetMonitor to get a list of probes and probe IDs.

Parameters:

getProbeRequest -

Returns:

Result of the GetProbe operation returned by the service.

See Also:

• AWS API Documentation

getProbe

default GetProbeResponse getProbe(Consumer<GetProbeRequest.Builder> getProbeRequest)
                           throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Returns the details about a probe. This action requires both the monitorName and probeId parameters. Run ListMonitors to get a list of monitor names. Run GetMonitor to get a list of probes and probe IDs.

This is a convenience which creates an instance of the GetProbeRequest.Builder avoiding the need to create one manually via GetProbeRequest.builder()

Parameters:

getProbeRequest - A Consumer that will call methods on GetProbeRequest.Builder to create a request.

Returns:

Result of the GetProbe operation returned by the service.

See Also:

• AWS API Documentation

listMonitors

default ListMonitorsResponse listMonitors(ListMonitorsRequest listMonitorsRequest)
                                   throws AccessDeniedException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Returns a list of all of your monitors.

Parameters:

listMonitorsRequest -

Returns:

Result of the ListMonitors operation returned by the service.

See Also:

• AWS API Documentation

listMonitors

default ListMonitorsResponse listMonitors(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)
                                   throws AccessDeniedException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Returns a list of all of your monitors.

This is a convenience which creates an instance of the ListMonitorsRequest.Builder avoiding the need to create one manually via ListMonitorsRequest.builder()

Parameters:

listMonitorsRequest - A Consumer that will call methods on ListMonitorsRequest.Builder to create a request.

Returns:

Result of the ListMonitors operation returned by the service.

See Also:

• AWS API Documentation

listMonitorsPaginator

default ListMonitorsIterable listMonitorsPaginator(ListMonitorsRequest listMonitorsRequest)
                                            throws AccessDeniedException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

This is a variant of listMonitors(software.amazon.awssdk.services.networkmonitor.model.ListMonitorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.networkmonitor.paginators.ListMonitorsIterable responses = client.listMonitorsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.networkmonitor.paginators.ListMonitorsIterable responses = client
             .listMonitorsPaginator(request);
     for (software.amazon.awssdk.services.networkmonitor.model.ListMonitorsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.networkmonitor.paginators.ListMonitorsIterable responses = client.listMonitorsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listMonitors(software.amazon.awssdk.services.networkmonitor.model.ListMonitorsRequest) operation.

Parameters:

listMonitorsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listMonitorsPaginator

default ListMonitorsIterable listMonitorsPaginator(Consumer<ListMonitorsRequest.Builder> listMonitorsRequest)
                                            throws AccessDeniedException,
ThrottlingException,
ValidationException,
InternalServerException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

This is a variant of listMonitors(software.amazon.awssdk.services.networkmonitor.model.ListMonitorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.networkmonitor.paginators.ListMonitorsIterable responses = client.listMonitorsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.networkmonitor.paginators.ListMonitorsIterable responses = client
             .listMonitorsPaginator(request);
     for (software.amazon.awssdk.services.networkmonitor.model.ListMonitorsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.networkmonitor.paginators.ListMonitorsIterable responses = client.listMonitorsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listMonitors(software.amazon.awssdk.services.networkmonitor.model.ListMonitorsRequest) operation.

This is a convenience which creates an instance of the ListMonitorsRequest.Builder avoiding the need to create one manually via ListMonitorsRequest.builder()

Parameters:

listMonitorsRequest - A Consumer that will call methods on ListMonitorsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listTagsForResource

default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Lists the tags assigned to this resource.

Parameters:

listTagsForResourceRequest -

Returns:

Result of the ListTagsForResource operation returned by the service.

See Also:

• AWS API Documentation

listTagsForResource

default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Lists the tags assigned to this resource.

This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()

Parameters:

listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.

Returns:

Result of the ListTagsForResource operation returned by the service.

See Also:

• AWS API Documentation

tagResource

default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Adds key-value pairs to a monitor or probe.

Parameters:

tagResourceRequest -

Returns:

Result of the TagResource operation returned by the service.

See Also:

• AWS API Documentation

tagResource

default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Adds key-value pairs to a monitor or probe.

This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()

Parameters:

tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.

Returns:

Result of the TagResource operation returned by the service.

See Also:

• AWS API Documentation

untagResource

default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Removes a key-value pair from a monitor or probe.

Parameters:

untagResourceRequest -

Returns:

Result of the UntagResource operation returned by the service.

See Also:

• AWS API Documentation

untagResource

default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Removes a key-value pair from a monitor or probe.

This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()

Parameters:

untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.

Returns:

Result of the UntagResource operation returned by the service.

See Also:

• AWS API Documentation

updateMonitor

default UpdateMonitorResponse updateMonitor(UpdateMonitorRequest updateMonitorRequest)
                                     throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Updates the aggregationPeriod for a monitor. Monitors support an aggregationPeriod of either 30 or 60 seconds. This action requires the monitorName and probeId parameter. Run ListMonitors to get a list of monitor names.

Parameters:

updateMonitorRequest -

Returns:

Result of the UpdateMonitor operation returned by the service.

See Also:

• AWS API Documentation

updateMonitor

default UpdateMonitorResponse updateMonitor(Consumer<UpdateMonitorRequest.Builder> updateMonitorRequest)
                                     throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Updates the aggregationPeriod for a monitor. Monitors support an aggregationPeriod of either 30 or 60 seconds. This action requires the monitorName and probeId parameter. Run ListMonitors to get a list of monitor names.

This is a convenience which creates an instance of the UpdateMonitorRequest.Builder avoiding the need to create one manually via UpdateMonitorRequest.builder()

Parameters:

updateMonitorRequest - A Consumer that will call methods on UpdateMonitorRequest.Builder to create a request.

Returns:

Result of the UpdateMonitor operation returned by the service.

See Also:

• AWS API Documentation

updateProbe

default UpdateProbeResponse updateProbe(UpdateProbeRequest updateProbeRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Updates a monitor probe. This action requires both the monitorName and probeId parameters. Run ListMonitors to get a list of monitor names. Run GetMonitor to get a list of probes and probe IDs.

You can update the following para create a monitor with probes using this command. For each probe, you define the following:

• state—The state of the probe.

• destination— The target destination IP address for the probe.

• destinationPort—Required only if the protocol is TCP.

• protocol—The communication protocol between the source and destination. This will be either TCP or ICMP.

• packetSize—The size of the packets. This must be a number between 56 and 8500.

• (Optional) tags —Key-value pairs created and assigned to the probe.

Parameters:

updateProbeRequest -

Returns:

Result of the UpdateProbe operation returned by the service.

See Also:

• AWS API Documentation

updateProbe

default UpdateProbeResponse updateProbe(Consumer<UpdateProbeRequest.Builder> updateProbeRequest)
                                 throws AccessDeniedException,
ResourceNotFoundException,
ThrottlingException,
ValidationException,
InternalServerException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
NetworkMonitorException

Updates a monitor probe. This action requires both the monitorName and probeId parameters. Run ListMonitors to get a list of monitor names. Run GetMonitor to get a list of probes and probe IDs.

You can update the following para create a monitor with probes using this command. For each probe, you define the following:

• state—The state of the probe.

• destination— The target destination IP address for the probe.

• destinationPort—Required only if the protocol is TCP.

• protocol—The communication protocol between the source and destination. This will be either TCP or ICMP.

• packetSize—The size of the packets. This must be a number between 56 and 8500.

• (Optional) tags —Key-value pairs created and assigned to the probe.

This is a convenience which creates an instance of the UpdateProbeRequest.Builder avoiding the need to create one manually via UpdateProbeRequest.builder()

Parameters:

updateProbeRequest - A Consumer that will call methods on UpdateProbeRequest.Builder to create a request.

Returns:

Result of the UpdateProbe operation returned by the service.

See Also:

• AWS API Documentation

create

static NetworkMonitorClient create()

Create a NetworkMonitorClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

builder

static NetworkMonitorClientBuilder builder()

Create a builder that can be used to configure and create a NetworkMonitorClient.

serviceMetadata

static ServiceMetadata serviceMetadata()

serviceClientConfiguration

default NetworkMonitorServiceClientConfiguration serviceClientConfiguration()

Description copied from interface: SdkClient

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

Specified by:

serviceClientConfiguration in interface AwsClient

Specified by:

serviceClientConfiguration in interface SdkClient

Returns:

SdkServiceClientConfiguration