Interface LookoutMetricsClient

All Superinterfaces:

AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen")
@ThreadSafe
public interface LookoutMetricsClient
extends AwsClient

Service client for accessing LookoutMetrics. This can be created using the static builder() method.

This is the Amazon Lookout for Metrics API Reference. For an introduction to the service with tutorials for getting started, visit Amazon Lookout for Metrics Developer Guide.

Field Summary

Fields

Modifier and Type	Field	Description
static final String	SERVICE_METADATA_ID	Value for looking up the service's metadata from the ServiceMetadataProvider.
static final String	SERVICE_NAME

Method Summary

Modifier and Type	Method	Description
default ActivateAnomalyDetectorResponse	activateAnomalyDetector(Consumer<ActivateAnomalyDetectorRequest.Builder> activateAnomalyDetectorRequest)	Activates an anomaly detector.
default ActivateAnomalyDetectorResponse	activateAnomalyDetector(ActivateAnomalyDetectorRequest activateAnomalyDetectorRequest)	Activates an anomaly detector.
default BackTestAnomalyDetectorResponse	backTestAnomalyDetector(Consumer<BackTestAnomalyDetectorRequest.Builder> backTestAnomalyDetectorRequest)	Runs a backtest for anomaly detection for the specified resource.
default BackTestAnomalyDetectorResponse	backTestAnomalyDetector(BackTestAnomalyDetectorRequest backTestAnomalyDetectorRequest)	Runs a backtest for anomaly detection for the specified resource.
static LookoutMetricsClientBuilder	builder()	Create a builder that can be used to configure and create a LookoutMetricsClient.
static LookoutMetricsClient	create()	Create a LookoutMetricsClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
default CreateAlertResponse	createAlert(Consumer<CreateAlertRequest.Builder> createAlertRequest)	Creates an alert for an anomaly detector.
default CreateAlertResponse	createAlert(CreateAlertRequest createAlertRequest)	Creates an alert for an anomaly detector.
default CreateAnomalyDetectorResponse	createAnomalyDetector(Consumer<CreateAnomalyDetectorRequest.Builder> createAnomalyDetectorRequest)	Creates an anomaly detector.
default CreateAnomalyDetectorResponse	createAnomalyDetector(CreateAnomalyDetectorRequest createAnomalyDetectorRequest)	Creates an anomaly detector.
default CreateMetricSetResponse	createMetricSet(Consumer<CreateMetricSetRequest.Builder> createMetricSetRequest)	Creates a dataset.
default CreateMetricSetResponse	createMetricSet(CreateMetricSetRequest createMetricSetRequest)	Creates a dataset.
default DeactivateAnomalyDetectorResponse	deactivateAnomalyDetector(Consumer<DeactivateAnomalyDetectorRequest.Builder> deactivateAnomalyDetectorRequest)	Deactivates an anomaly detector.
default DeactivateAnomalyDetectorResponse	deactivateAnomalyDetector(DeactivateAnomalyDetectorRequest deactivateAnomalyDetectorRequest)	Deactivates an anomaly detector.
default DeleteAlertResponse	deleteAlert(Consumer<DeleteAlertRequest.Builder> deleteAlertRequest)	Deletes an alert.
default DeleteAlertResponse	deleteAlert(DeleteAlertRequest deleteAlertRequest)	Deletes an alert.
default DeleteAnomalyDetectorResponse	deleteAnomalyDetector(Consumer<DeleteAnomalyDetectorRequest.Builder> deleteAnomalyDetectorRequest)	Deletes a detector.
default DeleteAnomalyDetectorResponse	deleteAnomalyDetector(DeleteAnomalyDetectorRequest deleteAnomalyDetectorRequest)	Deletes a detector.
default DescribeAlertResponse	describeAlert(Consumer<DescribeAlertRequest.Builder> describeAlertRequest)	Describes an alert.
default DescribeAlertResponse	describeAlert(DescribeAlertRequest describeAlertRequest)	Describes an alert.
default DescribeAnomalyDetectionExecutionsResponse	describeAnomalyDetectionExecutions(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)	Returns information about the status of the specified anomaly detection jobs.
default DescribeAnomalyDetectionExecutionsResponse	describeAnomalyDetectionExecutions(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)	Returns information about the status of the specified anomaly detection jobs.
default DescribeAnomalyDetectionExecutionsIterable	describeAnomalyDetectionExecutionsPaginator(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)	This is a variant of describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation.
default DescribeAnomalyDetectionExecutionsIterable	describeAnomalyDetectionExecutionsPaginator(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)	This is a variant of describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation.
default DescribeAnomalyDetectorResponse	describeAnomalyDetector(Consumer<DescribeAnomalyDetectorRequest.Builder> describeAnomalyDetectorRequest)	Describes a detector.
default DescribeAnomalyDetectorResponse	describeAnomalyDetector(DescribeAnomalyDetectorRequest describeAnomalyDetectorRequest)	Describes a detector.
default DescribeMetricSetResponse	describeMetricSet(Consumer<DescribeMetricSetRequest.Builder> describeMetricSetRequest)	Describes a dataset.
default DescribeMetricSetResponse	describeMetricSet(DescribeMetricSetRequest describeMetricSetRequest)	Describes a dataset.
default DetectMetricSetConfigResponse	detectMetricSetConfig(Consumer<DetectMetricSetConfigRequest.Builder> detectMetricSetConfigRequest)	Detects an Amazon S3 dataset's file format, interval, and offset.
default DetectMetricSetConfigResponse	detectMetricSetConfig(DetectMetricSetConfigRequest detectMetricSetConfigRequest)	Detects an Amazon S3 dataset's file format, interval, and offset.
default GetAnomalyGroupResponse	getAnomalyGroup(Consumer<GetAnomalyGroupRequest.Builder> getAnomalyGroupRequest)	Returns details about a group of anomalous metrics.
default GetAnomalyGroupResponse	getAnomalyGroup(GetAnomalyGroupRequest getAnomalyGroupRequest)	Returns details about a group of anomalous metrics.
default GetDataQualityMetricsResponse	getDataQualityMetrics(Consumer<GetDataQualityMetricsRequest.Builder> getDataQualityMetricsRequest)	Returns details about the requested data quality metrics.
default GetDataQualityMetricsResponse	getDataQualityMetrics(GetDataQualityMetricsRequest getDataQualityMetricsRequest)	Returns details about the requested data quality metrics.
default GetFeedbackResponse	getFeedback(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)	Get feedback for an anomaly group.
default GetFeedbackResponse	getFeedback(GetFeedbackRequest getFeedbackRequest)	Get feedback for an anomaly group.
default GetFeedbackIterable	getFeedbackPaginator(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)	This is a variant of getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation.
default GetFeedbackIterable	getFeedbackPaginator(GetFeedbackRequest getFeedbackRequest)	This is a variant of getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation.
default GetSampleDataResponse	getSampleData(Consumer<GetSampleDataRequest.Builder> getSampleDataRequest)	Returns a selection of sample records from an Amazon S3 datasource.
default GetSampleDataResponse	getSampleData(GetSampleDataRequest getSampleDataRequest)	Returns a selection of sample records from an Amazon S3 datasource.
default ListAlertsResponse	listAlerts(Consumer<ListAlertsRequest.Builder> listAlertsRequest)	Lists the alerts attached to a detector.
default ListAlertsResponse	listAlerts(ListAlertsRequest listAlertsRequest)	Lists the alerts attached to a detector.
default ListAlertsIterable	listAlertsPaginator(Consumer<ListAlertsRequest.Builder> listAlertsRequest)	This is a variant of listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation.
default ListAlertsIterable	listAlertsPaginator(ListAlertsRequest listAlertsRequest)	This is a variant of listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation.
default ListAnomalyDetectorsResponse	listAnomalyDetectors(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)	Lists the detectors in the current AWS Region.
default ListAnomalyDetectorsResponse	listAnomalyDetectors(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)	Lists the detectors in the current AWS Region.
default ListAnomalyDetectorsIterable	listAnomalyDetectorsPaginator(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)	This is a variant of listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation.
default ListAnomalyDetectorsIterable	listAnomalyDetectorsPaginator(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)	This is a variant of listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation.
default ListAnomalyGroupRelatedMetricsResponse	listAnomalyGroupRelatedMetrics(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)	Returns a list of measures that are potential causes or effects of an anomaly group.
default ListAnomalyGroupRelatedMetricsResponse	listAnomalyGroupRelatedMetrics(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)	Returns a list of measures that are potential causes or effects of an anomaly group.
default ListAnomalyGroupRelatedMetricsIterable	listAnomalyGroupRelatedMetricsPaginator(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)	This is a variant of listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation.
default ListAnomalyGroupRelatedMetricsIterable	listAnomalyGroupRelatedMetricsPaginator(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)	This is a variant of listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation.
default ListAnomalyGroupSummariesResponse	listAnomalyGroupSummaries(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)	Returns a list of anomaly groups.
default ListAnomalyGroupSummariesResponse	listAnomalyGroupSummaries(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)	Returns a list of anomaly groups.
default ListAnomalyGroupSummariesIterable	listAnomalyGroupSummariesPaginator(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)	This is a variant of listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation.
default ListAnomalyGroupSummariesIterable	listAnomalyGroupSummariesPaginator(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)	This is a variant of listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation.
default ListAnomalyGroupTimeSeriesResponse	listAnomalyGroupTimeSeries(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)	Gets a list of anomalous metrics for a measure in an anomaly group.
default ListAnomalyGroupTimeSeriesResponse	listAnomalyGroupTimeSeries(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)	Gets a list of anomalous metrics for a measure in an anomaly group.
default ListAnomalyGroupTimeSeriesIterable	listAnomalyGroupTimeSeriesPaginator(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)	This is a variant of listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation.
default ListAnomalyGroupTimeSeriesIterable	listAnomalyGroupTimeSeriesPaginator(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)	This is a variant of listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation.
default ListMetricSetsResponse	listMetricSets(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)	Lists the datasets in the current AWS Region.
default ListMetricSetsResponse	listMetricSets(ListMetricSetsRequest listMetricSetsRequest)	Lists the datasets in the current AWS Region.
default ListMetricSetsIterable	listMetricSetsPaginator(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)	This is a variant of listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation.
default ListMetricSetsIterable	listMetricSetsPaginator(ListMetricSetsRequest listMetricSetsRequest)	This is a variant of listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation.
default ListTagsForResourceResponse	listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)	Gets a list of tags for a detector, dataset, or alert.
default ListTagsForResourceResponse	listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)	Gets a list of tags for a detector, dataset, or alert.
default PutFeedbackResponse	putFeedback(Consumer<PutFeedbackRequest.Builder> putFeedbackRequest)	Add feedback for an anomalous metric.
default PutFeedbackResponse	putFeedback(PutFeedbackRequest putFeedbackRequest)	Add feedback for an anomalous metric.
default LookoutMetricsServiceClientConfiguration	serviceClientConfiguration()	The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
static ServiceMetadata	serviceMetadata()
default TagResourceResponse	tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)	Adds tags to a detector, dataset, or alert.
default TagResourceResponse	tagResource(TagResourceRequest tagResourceRequest)	Adds tags to a detector, dataset, or alert.
default UntagResourceResponse	untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)	Removes tags from a detector, dataset, or alert.
default UntagResourceResponse	untagResource(UntagResourceRequest untagResourceRequest)	Removes tags from a detector, dataset, or alert.
default UpdateAlertResponse	updateAlert(Consumer<UpdateAlertRequest.Builder> updateAlertRequest)	Make changes to an existing alert.
default UpdateAlertResponse	updateAlert(UpdateAlertRequest updateAlertRequest)	Make changes to an existing alert.
default UpdateAnomalyDetectorResponse	updateAnomalyDetector(Consumer<UpdateAnomalyDetectorRequest.Builder> updateAnomalyDetectorRequest)	Updates a detector.
default UpdateAnomalyDetectorResponse	updateAnomalyDetector(UpdateAnomalyDetectorRequest updateAnomalyDetectorRequest)	Updates a detector.
default UpdateMetricSetResponse	updateMetricSet(Consumer<UpdateMetricSetRequest.Builder> updateMetricSetRequest)	Updates a dataset.
default UpdateMetricSetResponse	updateMetricSet(UpdateMetricSetRequest updateMetricSetRequest)	Updates a dataset.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

close

Methods inherited from interface software.amazon.awssdk.core.SdkClient

serviceName

Field Details

SERVICE_NAME

static final String SERVICE_NAME

See Also:

• Constant Field Values

SERVICE_METADATA_ID

static final String SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

See Also:

• Constant Field Values

Method Details

activateAnomalyDetector

default ActivateAnomalyDetectorResponse activateAnomalyDetector(ActivateAnomalyDetectorRequest activateAnomalyDetectorRequest)
                                                         throws ValidationException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Activates an anomaly detector.

Parameters:

activateAnomalyDetectorRequest -

Returns:

Result of the ActivateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

activateAnomalyDetector

default ActivateAnomalyDetectorResponse activateAnomalyDetector(Consumer<ActivateAnomalyDetectorRequest.Builder> activateAnomalyDetectorRequest)
                                                         throws ValidationException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
ConflictException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Activates an anomaly detector.

This is a convenience which creates an instance of the ActivateAnomalyDetectorRequest.Builder avoiding the need to create one manually via ActivateAnomalyDetectorRequest.builder()

Parameters:

activateAnomalyDetectorRequest - A Consumer that will call methods on ActivateAnomalyDetectorRequest.Builder to create a request.

Returns:

Result of the ActivateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

backTestAnomalyDetector

default BackTestAnomalyDetectorResponse backTestAnomalyDetector(BackTestAnomalyDetectorRequest backTestAnomalyDetectorRequest)
                                                         throws ValidationException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Runs a backtest for anomaly detection for the specified resource.

Parameters:

backTestAnomalyDetectorRequest -

Returns:

Result of the BackTestAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

backTestAnomalyDetector

default BackTestAnomalyDetectorResponse backTestAnomalyDetector(Consumer<BackTestAnomalyDetectorRequest.Builder> backTestAnomalyDetectorRequest)
                                                         throws ValidationException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Runs a backtest for anomaly detection for the specified resource.

This is a convenience which creates an instance of the BackTestAnomalyDetectorRequest.Builder avoiding the need to create one manually via BackTestAnomalyDetectorRequest.builder()

Parameters:

backTestAnomalyDetectorRequest - A Consumer that will call methods on BackTestAnomalyDetectorRequest.Builder to create a request.

Returns:

Result of the BackTestAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

createAlert

default CreateAlertResponse createAlert(CreateAlertRequest createAlertRequest)
                                 throws ConflictException,
ValidationException,
ServiceQuotaExceededException,
AccessDeniedException,
TooManyRequestsException,
ResourceNotFoundException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Creates an alert for an anomaly detector.

Parameters:

createAlertRequest -

Returns:

Result of the CreateAlert operation returned by the service.

See Also:

• AWS API Documentation

createAlert

default CreateAlertResponse createAlert(Consumer<CreateAlertRequest.Builder> createAlertRequest)
                                 throws ConflictException,
ValidationException,
ServiceQuotaExceededException,
AccessDeniedException,
TooManyRequestsException,
ResourceNotFoundException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Creates an alert for an anomaly detector.

This is a convenience which creates an instance of the CreateAlertRequest.Builder avoiding the need to create one manually via CreateAlertRequest.builder()

Parameters:

createAlertRequest - A Consumer that will call methods on CreateAlertRequest.Builder to create a request.

Returns:

Result of the CreateAlert operation returned by the service.

See Also:

• AWS API Documentation

createAnomalyDetector

default CreateAnomalyDetectorResponse createAnomalyDetector(CreateAnomalyDetectorRequest createAnomalyDetectorRequest)
                                                     throws ConflictException,
ValidationException,
ServiceQuotaExceededException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Creates an anomaly detector.

Parameters:

createAnomalyDetectorRequest -

Returns:

Result of the CreateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

createAnomalyDetector

default CreateAnomalyDetectorResponse createAnomalyDetector(Consumer<CreateAnomalyDetectorRequest.Builder> createAnomalyDetectorRequest)
                                                     throws ConflictException,
ValidationException,
ServiceQuotaExceededException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Creates an anomaly detector.

This is a convenience which creates an instance of the CreateAnomalyDetectorRequest.Builder avoiding the need to create one manually via CreateAnomalyDetectorRequest.builder()

Parameters:

createAnomalyDetectorRequest - A Consumer that will call methods on CreateAnomalyDetectorRequest.Builder to create a request.

Returns:

Result of the CreateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

createMetricSet

default CreateMetricSetResponse createMetricSet(CreateMetricSetRequest createMetricSetRequest)
                                         throws ConflictException,
ValidationException,
ResourceNotFoundException,
ServiceQuotaExceededException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Creates a dataset.

Parameters:

createMetricSetRequest -

Returns:

Result of the CreateMetricSet operation returned by the service.

See Also:

• AWS API Documentation

createMetricSet

default CreateMetricSetResponse createMetricSet(Consumer<CreateMetricSetRequest.Builder> createMetricSetRequest)
                                         throws ConflictException,
ValidationException,
ResourceNotFoundException,
ServiceQuotaExceededException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Creates a dataset.

This is a convenience which creates an instance of the CreateMetricSetRequest.Builder avoiding the need to create one manually via CreateMetricSetRequest.builder()

Parameters:

createMetricSetRequest - A Consumer that will call methods on CreateMetricSetRequest.Builder to create a request.

Returns:

Result of the CreateMetricSet operation returned by the service.

See Also:

• AWS API Documentation

deactivateAnomalyDetector

default DeactivateAnomalyDetectorResponse deactivateAnomalyDetector(DeactivateAnomalyDetectorRequest deactivateAnomalyDetectorRequest)
                                                             throws ValidationException,
ConflictException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Deactivates an anomaly detector.

Parameters:

deactivateAnomalyDetectorRequest -

Returns:

Result of the DeactivateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

deactivateAnomalyDetector

default DeactivateAnomalyDetectorResponse deactivateAnomalyDetector(Consumer<DeactivateAnomalyDetectorRequest.Builder> deactivateAnomalyDetectorRequest)
                                                             throws ValidationException,
ConflictException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Deactivates an anomaly detector.

This is a convenience which creates an instance of the DeactivateAnomalyDetectorRequest.Builder avoiding the need to create one manually via DeactivateAnomalyDetectorRequest.builder()

Parameters:

deactivateAnomalyDetectorRequest - A Consumer that will call methods on DeactivateAnomalyDetectorRequest.Builder to create a request.

Returns:

Result of the DeactivateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

deleteAlert

default DeleteAlertResponse deleteAlert(DeleteAlertRequest deleteAlertRequest)
                                 throws ResourceNotFoundException,
ValidationException,
TooManyRequestsException,
AccessDeniedException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Deletes an alert.

Parameters:

deleteAlertRequest -

Returns:

Result of the DeleteAlert operation returned by the service.

See Also:

• AWS API Documentation

deleteAlert

default DeleteAlertResponse deleteAlert(Consumer<DeleteAlertRequest.Builder> deleteAlertRequest)
                                 throws ResourceNotFoundException,
ValidationException,
TooManyRequestsException,
AccessDeniedException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Deletes an alert.

This is a convenience which creates an instance of the DeleteAlertRequest.Builder avoiding the need to create one manually via DeleteAlertRequest.builder()

Parameters:

deleteAlertRequest - A Consumer that will call methods on DeleteAlertRequest.Builder to create a request.

Returns:

Result of the DeleteAlert operation returned by the service.

See Also:

• AWS API Documentation

deleteAnomalyDetector

default DeleteAnomalyDetectorResponse deleteAnomalyDetector(DeleteAnomalyDetectorRequest deleteAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
ConflictException,
TooManyRequestsException,
AccessDeniedException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Deletes a detector. Deleting an anomaly detector will delete all of its corresponding resources including any configured datasets and alerts.

Parameters:

deleteAnomalyDetectorRequest -

Returns:

Result of the DeleteAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

deleteAnomalyDetector

default DeleteAnomalyDetectorResponse deleteAnomalyDetector(Consumer<DeleteAnomalyDetectorRequest.Builder> deleteAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
ConflictException,
TooManyRequestsException,
AccessDeniedException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Deletes a detector. Deleting an anomaly detector will delete all of its corresponding resources including any configured datasets and alerts.

This is a convenience which creates an instance of the DeleteAnomalyDetectorRequest.Builder avoiding the need to create one manually via DeleteAnomalyDetectorRequest.builder()

Parameters:

deleteAnomalyDetectorRequest - A Consumer that will call methods on DeleteAnomalyDetectorRequest.Builder to create a request.

Returns:

Result of the DeleteAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

describeAlert

default DescribeAlertResponse describeAlert(DescribeAlertRequest describeAlertRequest)
                                     throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Describes an alert.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

Parameters:

describeAlertRequest -

Returns:

Result of the DescribeAlert operation returned by the service.

See Also:

• AWS API Documentation

describeAlert

default DescribeAlertResponse describeAlert(Consumer<DescribeAlertRequest.Builder> describeAlertRequest)
                                     throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Describes an alert.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

This is a convenience which creates an instance of the DescribeAlertRequest.Builder avoiding the need to create one manually via DescribeAlertRequest.builder()

Parameters:

describeAlertRequest - A Consumer that will call methods on DescribeAlertRequest.Builder to create a request.

Returns:

Result of the DescribeAlert operation returned by the service.

See Also:

• AWS API Documentation

describeAnomalyDetectionExecutions

default DescribeAnomalyDetectionExecutionsResponse describeAnomalyDetectionExecutions(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)
                                                                               throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns information about the status of the specified anomaly detection jobs.

Parameters:

describeAnomalyDetectionExecutionsRequest -

Returns:

Result of the DescribeAnomalyDetectionExecutions operation returned by the service.

See Also:

• AWS API Documentation

describeAnomalyDetectionExecutions

default DescribeAnomalyDetectionExecutionsResponse describeAnomalyDetectionExecutions(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)
                                                                               throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns information about the status of the specified anomaly detection jobs.

This is a convenience which creates an instance of the DescribeAnomalyDetectionExecutionsRequest.Builder avoiding the need to create one manually via DescribeAnomalyDetectionExecutionsRequest.builder()

Parameters:

describeAnomalyDetectionExecutionsRequest - A Consumer that will call methods on DescribeAnomalyDetectionExecutionsRequest.Builder to create a request.

Returns:

Result of the DescribeAnomalyDetectionExecutions operation returned by the service.

See Also:

• AWS API Documentation

describeAnomalyDetectionExecutionsPaginator

default DescribeAnomalyDetectionExecutionsIterable describeAnomalyDetectionExecutionsPaginator(DescribeAnomalyDetectionExecutionsRequest describeAnomalyDetectionExecutionsRequest)
                                                                                        throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client
             .describeAnomalyDetectionExecutionsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation.

Parameters:

describeAnomalyDetectionExecutionsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

describeAnomalyDetectionExecutionsPaginator

default DescribeAnomalyDetectionExecutionsIterable describeAnomalyDetectionExecutionsPaginator(Consumer<DescribeAnomalyDetectionExecutionsRequest.Builder> describeAnomalyDetectionExecutionsRequest)
                                                                                        throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client
             .describeAnomalyDetectionExecutionsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.DescribeAnomalyDetectionExecutionsIterable responses = client.describeAnomalyDetectionExecutionsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the describeAnomalyDetectionExecutions(software.amazon.awssdk.services.lookoutmetrics.model.DescribeAnomalyDetectionExecutionsRequest) operation.

This is a convenience which creates an instance of the DescribeAnomalyDetectionExecutionsRequest.Builder avoiding the need to create one manually via DescribeAnomalyDetectionExecutionsRequest.builder()

Parameters:

describeAnomalyDetectionExecutionsRequest - A Consumer that will call methods on DescribeAnomalyDetectionExecutionsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

describeAnomalyDetector

default DescribeAnomalyDetectorResponse describeAnomalyDetector(DescribeAnomalyDetectorRequest describeAnomalyDetectorRequest)
                                                         throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Describes a detector.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

Parameters:

describeAnomalyDetectorRequest -

Returns:

Result of the DescribeAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

describeAnomalyDetector

default DescribeAnomalyDetectorResponse describeAnomalyDetector(Consumer<DescribeAnomalyDetectorRequest.Builder> describeAnomalyDetectorRequest)
                                                         throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Describes a detector.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

This is a convenience which creates an instance of the DescribeAnomalyDetectorRequest.Builder avoiding the need to create one manually via DescribeAnomalyDetectorRequest.builder()

Parameters:

describeAnomalyDetectorRequest - A Consumer that will call methods on DescribeAnomalyDetectorRequest.Builder to create a request.

Returns:

Result of the DescribeAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

describeMetricSet

default DescribeMetricSetResponse describeMetricSet(DescribeMetricSetRequest describeMetricSetRequest)
                                             throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Describes a dataset.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

Parameters:

describeMetricSetRequest -

Returns:

Result of the DescribeMetricSet operation returned by the service.

See Also:

• AWS API Documentation

describeMetricSet

default DescribeMetricSetResponse describeMetricSet(Consumer<DescribeMetricSetRequest.Builder> describeMetricSetRequest)
                                             throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Describes a dataset.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

This is a convenience which creates an instance of the DescribeMetricSetRequest.Builder avoiding the need to create one manually via DescribeMetricSetRequest.builder()

Parameters:

describeMetricSetRequest - A Consumer that will call methods on DescribeMetricSetRequest.Builder to create a request.

Returns:

Result of the DescribeMetricSet operation returned by the service.

See Also:

• AWS API Documentation

detectMetricSetConfig

default DetectMetricSetConfigResponse detectMetricSetConfig(DetectMetricSetConfigRequest detectMetricSetConfigRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Detects an Amazon S3 dataset's file format, interval, and offset.

Parameters:

detectMetricSetConfigRequest -

Returns:

Result of the DetectMetricSetConfig operation returned by the service.

See Also:

• AWS API Documentation

detectMetricSetConfig

default DetectMetricSetConfigResponse detectMetricSetConfig(Consumer<DetectMetricSetConfigRequest.Builder> detectMetricSetConfigRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Detects an Amazon S3 dataset's file format, interval, and offset.

This is a convenience which creates an instance of the DetectMetricSetConfigRequest.Builder avoiding the need to create one manually via DetectMetricSetConfigRequest.builder()

Parameters:

detectMetricSetConfigRequest - A Consumer that will call methods on DetectMetricSetConfigRequest.Builder to create a request.

Returns:

Result of the DetectMetricSetConfig operation returned by the service.

See Also:

• AWS API Documentation

getAnomalyGroup

default GetAnomalyGroupResponse getAnomalyGroup(GetAnomalyGroupRequest getAnomalyGroupRequest)
                                         throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns details about a group of anomalous metrics.

Parameters:

getAnomalyGroupRequest -

Returns:

Result of the GetAnomalyGroup operation returned by the service.

See Also:

• AWS API Documentation

getAnomalyGroup

default GetAnomalyGroupResponse getAnomalyGroup(Consumer<GetAnomalyGroupRequest.Builder> getAnomalyGroupRequest)
                                         throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns details about a group of anomalous metrics.

This is a convenience which creates an instance of the GetAnomalyGroupRequest.Builder avoiding the need to create one manually via GetAnomalyGroupRequest.builder()

Parameters:

getAnomalyGroupRequest - A Consumer that will call methods on GetAnomalyGroupRequest.Builder to create a request.

Returns:

Result of the GetAnomalyGroup operation returned by the service.

See Also:

• AWS API Documentation

getDataQualityMetrics

default GetDataQualityMetricsResponse getDataQualityMetrics(GetDataQualityMetricsRequest getDataQualityMetricsRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns details about the requested data quality metrics.

Parameters:

getDataQualityMetricsRequest -

Returns:

Result of the GetDataQualityMetrics operation returned by the service.

See Also:

• AWS API Documentation

getDataQualityMetrics

default GetDataQualityMetricsResponse getDataQualityMetrics(Consumer<GetDataQualityMetricsRequest.Builder> getDataQualityMetricsRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns details about the requested data quality metrics.

This is a convenience which creates an instance of the GetDataQualityMetricsRequest.Builder avoiding the need to create one manually via GetDataQualityMetricsRequest.builder()

Parameters:

getDataQualityMetricsRequest - A Consumer that will call methods on GetDataQualityMetricsRequest.Builder to create a request.

Returns:

Result of the GetDataQualityMetrics operation returned by the service.

See Also:

• AWS API Documentation

getFeedback

default GetFeedbackResponse getFeedback(GetFeedbackRequest getFeedbackRequest)
                                 throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Get feedback for an anomaly group.

Parameters:

getFeedbackRequest -

Returns:

Result of the GetFeedback operation returned by the service.

See Also:

• AWS API Documentation

getFeedback

default GetFeedbackResponse getFeedback(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)
                                 throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Get feedback for an anomaly group.

This is a convenience which creates an instance of the GetFeedbackRequest.Builder avoiding the need to create one manually via GetFeedbackRequest.builder()

Parameters:

getFeedbackRequest - A Consumer that will call methods on GetFeedbackRequest.Builder to create a request.

Returns:

Result of the GetFeedback operation returned by the service.

See Also:

• AWS API Documentation

getFeedbackPaginator

default GetFeedbackIterable getFeedbackPaginator(GetFeedbackRequest getFeedbackRequest)
                                          throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client
             .getFeedbackPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation.

Parameters:

getFeedbackRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

getFeedbackPaginator

default GetFeedbackIterable getFeedbackPaginator(Consumer<GetFeedbackRequest.Builder> getFeedbackRequest)
                                          throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client
             .getFeedbackPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.GetFeedbackIterable responses = client.getFeedbackPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the getFeedback(software.amazon.awssdk.services.lookoutmetrics.model.GetFeedbackRequest) operation.

This is a convenience which creates an instance of the GetFeedbackRequest.Builder avoiding the need to create one manually via GetFeedbackRequest.builder()

Parameters:

getFeedbackRequest - A Consumer that will call methods on GetFeedbackRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

getSampleData

default GetSampleDataResponse getSampleData(GetSampleDataRequest getSampleDataRequest)
                                     throws ValidationException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns a selection of sample records from an Amazon S3 datasource.

Parameters:

getSampleDataRequest -

Returns:

Result of the GetSampleData operation returned by the service.

See Also:

• AWS API Documentation

getSampleData

default GetSampleDataResponse getSampleData(Consumer<GetSampleDataRequest.Builder> getSampleDataRequest)
                                     throws ValidationException,
ResourceNotFoundException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns a selection of sample records from an Amazon S3 datasource.

This is a convenience which creates an instance of the GetSampleDataRequest.Builder avoiding the need to create one manually via GetSampleDataRequest.builder()

Parameters:

getSampleDataRequest - A Consumer that will call methods on GetSampleDataRequest.Builder to create a request.

Returns:

Result of the GetSampleData operation returned by the service.

See Also:

• AWS API Documentation

listAlerts

default ListAlertsResponse listAlerts(ListAlertsRequest listAlertsRequest)
                               throws ResourceNotFoundException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
ValidationException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Lists the alerts attached to a detector.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

Parameters:

listAlertsRequest -

Returns:

Result of the ListAlerts operation returned by the service.

See Also:

• AWS API Documentation

listAlerts

default ListAlertsResponse listAlerts(Consumer<ListAlertsRequest.Builder> listAlertsRequest)
                               throws ResourceNotFoundException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
ValidationException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Lists the alerts attached to a detector.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

This is a convenience which creates an instance of the ListAlertsRequest.Builder avoiding the need to create one manually via ListAlertsRequest.builder()

Parameters:

listAlertsRequest - A Consumer that will call methods on ListAlertsRequest.Builder to create a request.

Returns:

Result of the ListAlerts operation returned by the service.

See Also:

• AWS API Documentation

listAlertsPaginator

default ListAlertsIterable listAlertsPaginator(ListAlertsRequest listAlertsRequest)
                                        throws ResourceNotFoundException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
ValidationException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation.

Parameters:

listAlertsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAlertsPaginator

default ListAlertsIterable listAlertsPaginator(Consumer<ListAlertsRequest.Builder> listAlertsRequest)
                                        throws ResourceNotFoundException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
ValidationException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAlertsIterable responses = client.listAlertsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAlerts(software.amazon.awssdk.services.lookoutmetrics.model.ListAlertsRequest) operation.

This is a convenience which creates an instance of the ListAlertsRequest.Builder avoiding the need to create one manually via ListAlertsRequest.builder()

Parameters:

listAlertsRequest - A Consumer that will call methods on ListAlertsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyDetectors

default ListAnomalyDetectorsResponse listAnomalyDetectors(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)
                                                   throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Lists the detectors in the current AWS Region.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

Parameters:

listAnomalyDetectorsRequest -

Returns:

Result of the ListAnomalyDetectors operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyDetectors

default ListAnomalyDetectorsResponse listAnomalyDetectors(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)
                                                   throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Lists the detectors in the current AWS Region.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

This is a convenience which creates an instance of the ListAnomalyDetectorsRequest.Builder avoiding the need to create one manually via ListAnomalyDetectorsRequest.builder()

Parameters:

listAnomalyDetectorsRequest - A Consumer that will call methods on ListAnomalyDetectorsRequest.Builder to create a request.

Returns:

Result of the ListAnomalyDetectors operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyDetectorsPaginator

default ListAnomalyDetectorsIterable listAnomalyDetectorsPaginator(ListAnomalyDetectorsRequest listAnomalyDetectorsRequest)
                                                            throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client
             .listAnomalyDetectorsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation.

Parameters:

listAnomalyDetectorsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyDetectorsPaginator

default ListAnomalyDetectorsIterable listAnomalyDetectorsPaginator(Consumer<ListAnomalyDetectorsRequest.Builder> listAnomalyDetectorsRequest)
                                                            throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client
             .listAnomalyDetectorsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyDetectorsIterable responses = client.listAnomalyDetectorsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyDetectors(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyDetectorsRequest) operation.

This is a convenience which creates an instance of the ListAnomalyDetectorsRequest.Builder avoiding the need to create one manually via ListAnomalyDetectorsRequest.builder()

Parameters:

listAnomalyDetectorsRequest - A Consumer that will call methods on ListAnomalyDetectorsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyGroupRelatedMetrics

default ListAnomalyGroupRelatedMetricsResponse listAnomalyGroupRelatedMetrics(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)
                                                                       throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns a list of measures that are potential causes or effects of an anomaly group.

Parameters:

listAnomalyGroupRelatedMetricsRequest -

Returns:

Result of the ListAnomalyGroupRelatedMetrics operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyGroupRelatedMetrics

default ListAnomalyGroupRelatedMetricsResponse listAnomalyGroupRelatedMetrics(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)
                                                                       throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns a list of measures that are potential causes or effects of an anomaly group.

This is a convenience which creates an instance of the ListAnomalyGroupRelatedMetricsRequest.Builder avoiding the need to create one manually via ListAnomalyGroupRelatedMetricsRequest.builder()

Parameters:

listAnomalyGroupRelatedMetricsRequest - A Consumer that will call methods on ListAnomalyGroupRelatedMetricsRequest.Builder to create a request.

Returns:

Result of the ListAnomalyGroupRelatedMetrics operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyGroupRelatedMetricsPaginator

default ListAnomalyGroupRelatedMetricsIterable listAnomalyGroupRelatedMetricsPaginator(ListAnomalyGroupRelatedMetricsRequest listAnomalyGroupRelatedMetricsRequest)
                                                                                throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client
             .listAnomalyGroupRelatedMetricsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation.

Parameters:

listAnomalyGroupRelatedMetricsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyGroupRelatedMetricsPaginator

default ListAnomalyGroupRelatedMetricsIterable listAnomalyGroupRelatedMetricsPaginator(Consumer<ListAnomalyGroupRelatedMetricsRequest.Builder> listAnomalyGroupRelatedMetricsRequest)
                                                                                throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client
             .listAnomalyGroupRelatedMetricsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupRelatedMetricsIterable responses = client.listAnomalyGroupRelatedMetricsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyGroupRelatedMetrics(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupRelatedMetricsRequest) operation.

This is a convenience which creates an instance of the ListAnomalyGroupRelatedMetricsRequest.Builder avoiding the need to create one manually via ListAnomalyGroupRelatedMetricsRequest.builder()

Parameters:

listAnomalyGroupRelatedMetricsRequest - A Consumer that will call methods on ListAnomalyGroupRelatedMetricsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyGroupSummaries

default ListAnomalyGroupSummariesResponse listAnomalyGroupSummaries(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)
                                                             throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns a list of anomaly groups.

Parameters:

listAnomalyGroupSummariesRequest -

Returns:

Result of the ListAnomalyGroupSummaries operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyGroupSummaries

default ListAnomalyGroupSummariesResponse listAnomalyGroupSummaries(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)
                                                             throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Returns a list of anomaly groups.

This is a convenience which creates an instance of the ListAnomalyGroupSummariesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupSummariesRequest.builder()

Parameters:

listAnomalyGroupSummariesRequest - A Consumer that will call methods on ListAnomalyGroupSummariesRequest.Builder to create a request.

Returns:

Result of the ListAnomalyGroupSummaries operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyGroupSummariesPaginator

default ListAnomalyGroupSummariesIterable listAnomalyGroupSummariesPaginator(ListAnomalyGroupSummariesRequest listAnomalyGroupSummariesRequest)
                                                                      throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client
             .listAnomalyGroupSummariesPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation.

Parameters:

listAnomalyGroupSummariesRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyGroupSummariesPaginator

default ListAnomalyGroupSummariesIterable listAnomalyGroupSummariesPaginator(Consumer<ListAnomalyGroupSummariesRequest.Builder> listAnomalyGroupSummariesRequest)
                                                                      throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client
             .listAnomalyGroupSummariesPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupSummariesIterable responses = client.listAnomalyGroupSummariesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyGroupSummaries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupSummariesRequest) operation.

This is a convenience which creates an instance of the ListAnomalyGroupSummariesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupSummariesRequest.builder()

Parameters:

listAnomalyGroupSummariesRequest - A Consumer that will call methods on ListAnomalyGroupSummariesRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyGroupTimeSeries

default ListAnomalyGroupTimeSeriesResponse listAnomalyGroupTimeSeries(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)
                                                               throws InternalServerException,
AccessDeniedException,
ValidationException,
ResourceNotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Gets a list of anomalous metrics for a measure in an anomaly group.

Parameters:

listAnomalyGroupTimeSeriesRequest -

Returns:

Result of the ListAnomalyGroupTimeSeries operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyGroupTimeSeries

default ListAnomalyGroupTimeSeriesResponse listAnomalyGroupTimeSeries(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)
                                                               throws InternalServerException,
AccessDeniedException,
ValidationException,
ResourceNotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Gets a list of anomalous metrics for a measure in an anomaly group.

This is a convenience which creates an instance of the ListAnomalyGroupTimeSeriesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupTimeSeriesRequest.builder()

Parameters:

listAnomalyGroupTimeSeriesRequest - A Consumer that will call methods on ListAnomalyGroupTimeSeriesRequest.Builder to create a request.

Returns:

Result of the ListAnomalyGroupTimeSeries operation returned by the service.

See Also:

• AWS API Documentation

listAnomalyGroupTimeSeriesPaginator

default ListAnomalyGroupTimeSeriesIterable listAnomalyGroupTimeSeriesPaginator(ListAnomalyGroupTimeSeriesRequest listAnomalyGroupTimeSeriesRequest)
                                                                        throws InternalServerException,
AccessDeniedException,
ValidationException,
ResourceNotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client
             .listAnomalyGroupTimeSeriesPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation.

Parameters:

listAnomalyGroupTimeSeriesRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listAnomalyGroupTimeSeriesPaginator

default ListAnomalyGroupTimeSeriesIterable listAnomalyGroupTimeSeriesPaginator(Consumer<ListAnomalyGroupTimeSeriesRequest.Builder> listAnomalyGroupTimeSeriesRequest)
                                                                        throws InternalServerException,
AccessDeniedException,
ValidationException,
ResourceNotFoundException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client
             .listAnomalyGroupTimeSeriesPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListAnomalyGroupTimeSeriesIterable responses = client.listAnomalyGroupTimeSeriesPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listAnomalyGroupTimeSeries(software.amazon.awssdk.services.lookoutmetrics.model.ListAnomalyGroupTimeSeriesRequest) operation.

This is a convenience which creates an instance of the ListAnomalyGroupTimeSeriesRequest.Builder avoiding the need to create one manually via ListAnomalyGroupTimeSeriesRequest.builder()

Parameters:

listAnomalyGroupTimeSeriesRequest - A Consumer that will call methods on ListAnomalyGroupTimeSeriesRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listMetricSets

default ListMetricSetsResponse listMetricSets(ListMetricSetsRequest listMetricSetsRequest)
                                       throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Lists the datasets in the current AWS Region.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

Parameters:

listMetricSetsRequest -

Returns:

Result of the ListMetricSets operation returned by the service.

See Also:

• AWS API Documentation

listMetricSets

default ListMetricSetsResponse listMetricSets(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)
                                       throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Lists the datasets in the current AWS Region.

Amazon Lookout for Metrics API actions are eventually consistent. If you do a read operation on a resource immediately after creating or modifying it, use retries to allow time for the write operation to complete.

This is a convenience which creates an instance of the ListMetricSetsRequest.Builder avoiding the need to create one manually via ListMetricSetsRequest.builder()

Parameters:

listMetricSetsRequest - A Consumer that will call methods on ListMetricSetsRequest.Builder to create a request.

Returns:

Result of the ListMetricSets operation returned by the service.

See Also:

• AWS API Documentation

listMetricSetsPaginator

default ListMetricSetsIterable listMetricSetsPaginator(ListMetricSetsRequest listMetricSetsRequest)
                                                throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client
             .listMetricSetsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation.

Parameters:

listMetricSetsRequest -

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listMetricSetsPaginator

default ListMetricSetsIterable listMetricSetsPaginator(Consumer<ListMetricSetsRequest.Builder> listMetricSetsRequest)
                                                throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
TooManyRequestsException,
InternalServerException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

This is a variant of listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.

When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.

The following are few ways to iterate through the response pages:

1) Using a Stream

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request);
 responses.stream().forEach(....);
 
 

2) Using For loop

 {
     @code
     software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client
             .listMetricSetsPaginator(request);
     for (software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsResponse response : responses) {
         // do something;
     }
 }
 

3) Use iterator directly

 
 software.amazon.awssdk.services.lookoutmetrics.paginators.ListMetricSetsIterable responses = client.listMetricSetsPaginator(request);
 responses.iterator().forEachRemaining(....);
 
 

Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

Note: If you prefer to have control on service calls, use the listMetricSets(software.amazon.awssdk.services.lookoutmetrics.model.ListMetricSetsRequest) operation.

This is a convenience which creates an instance of the ListMetricSetsRequest.Builder avoiding the need to create one manually via ListMetricSetsRequest.builder()

Parameters:

listMetricSetsRequest - A Consumer that will call methods on ListMetricSetsRequest.Builder to create a request.

Returns:

A custom iterable that can be used to iterate through all the response pages.

See Also:

• AWS API Documentation

listTagsForResource

default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)
                                                 throws InternalServerException,
ValidationException,
ResourceNotFoundException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Gets a list of tags for a detector, dataset, or alert.

Parameters:

listTagsForResourceRequest -

Returns:

Result of the ListTagsForResource operation returned by the service.

See Also:

• AWS API Documentation

listTagsForResource

default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)
                                                 throws InternalServerException,
ValidationException,
ResourceNotFoundException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Gets a list of tags for a detector, dataset, or alert.

This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()

Parameters:

listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.

Returns:

Result of the ListTagsForResource operation returned by the service.

See Also:

• AWS API Documentation

putFeedback

default PutFeedbackResponse putFeedback(PutFeedbackRequest putFeedbackRequest)
                                 throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Add feedback for an anomalous metric.

Parameters:

putFeedbackRequest -

Returns:

Result of the PutFeedback operation returned by the service.

See Also:

• AWS API Documentation

putFeedback

default PutFeedbackResponse putFeedback(Consumer<PutFeedbackRequest.Builder> putFeedbackRequest)
                                 throws ResourceNotFoundException,
ValidationException,
AccessDeniedException,
InternalServerException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Add feedback for an anomalous metric.

This is a convenience which creates an instance of the PutFeedbackRequest.Builder avoiding the need to create one manually via PutFeedbackRequest.builder()

Parameters:

putFeedbackRequest - A Consumer that will call methods on PutFeedbackRequest.Builder to create a request.

Returns:

Result of the PutFeedback operation returned by the service.

See Also:

• AWS API Documentation

tagResource

default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest)
                                 throws InternalServerException,
ValidationException,
ResourceNotFoundException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Adds tags to a detector, dataset, or alert.

Parameters:

tagResourceRequest -

Returns:

Result of the TagResource operation returned by the service.

See Also:

• AWS API Documentation

tagResource

default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)
                                 throws InternalServerException,
ValidationException,
ResourceNotFoundException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Adds tags to a detector, dataset, or alert.

This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()

Parameters:

tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.

Returns:

Result of the TagResource operation returned by the service.

See Also:

• AWS API Documentation

untagResource

default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest)
                                     throws InternalServerException,
ValidationException,
ResourceNotFoundException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Removes tags from a detector, dataset, or alert.

Parameters:

untagResourceRequest -

Returns:

Result of the UntagResource operation returned by the service.

See Also:

• AWS API Documentation

untagResource

default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)
                                     throws InternalServerException,
ValidationException,
ResourceNotFoundException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Removes tags from a detector, dataset, or alert.

This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()

Parameters:

untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.

Returns:

Result of the UntagResource operation returned by the service.

See Also:

• AWS API Documentation

updateAlert

default UpdateAlertResponse updateAlert(UpdateAlertRequest updateAlertRequest)
                                 throws ValidationException,
ResourceNotFoundException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Make changes to an existing alert.

Parameters:

updateAlertRequest -

Returns:

Result of the UpdateAlert operation returned by the service.

See Also:

• AWS API Documentation

updateAlert

default UpdateAlertResponse updateAlert(Consumer<UpdateAlertRequest.Builder> updateAlertRequest)
                                 throws ValidationException,
ResourceNotFoundException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Make changes to an existing alert.

This is a convenience which creates an instance of the UpdateAlertRequest.Builder avoiding the need to create one manually via UpdateAlertRequest.builder()

Parameters:

updateAlertRequest - A Consumer that will call methods on UpdateAlertRequest.Builder to create a request.

Returns:

Result of the UpdateAlert operation returned by the service.

See Also:

• AWS API Documentation

updateAnomalyDetector

default UpdateAnomalyDetectorResponse updateAnomalyDetector(UpdateAnomalyDetectorRequest updateAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Updates a detector. After activation, you can only change a detector's ingestion delay and description.

Parameters:

updateAnomalyDetectorRequest -

Returns:

Result of the UpdateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

updateAnomalyDetector

default UpdateAnomalyDetectorResponse updateAnomalyDetector(Consumer<UpdateAnomalyDetectorRequest.Builder> updateAnomalyDetectorRequest)
                                                     throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Updates a detector. After activation, you can only change a detector's ingestion delay and description.

This is a convenience which creates an instance of the UpdateAnomalyDetectorRequest.Builder avoiding the need to create one manually via UpdateAnomalyDetectorRequest.builder()

Parameters:

updateAnomalyDetectorRequest - A Consumer that will call methods on UpdateAnomalyDetectorRequest.Builder to create a request.

Returns:

Result of the UpdateAnomalyDetector operation returned by the service.

See Also:

• AWS API Documentation

updateMetricSet

default UpdateMetricSetResponse updateMetricSet(UpdateMetricSetRequest updateMetricSetRequest)
                                         throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Updates a dataset.

Parameters:

updateMetricSetRequest -

Returns:

Result of the UpdateMetricSet operation returned by the service.

See Also:

• AWS API Documentation

updateMetricSet

default UpdateMetricSetResponse updateMetricSet(Consumer<UpdateMetricSetRequest.Builder> updateMetricSetRequest)
                                         throws ResourceNotFoundException,
ValidationException,
InternalServerException,
AccessDeniedException,
TooManyRequestsException,
ServiceQuotaExceededException,
AwsServiceException,
SdkClientException,
LookoutMetricsException

Updates a dataset.

This is a convenience which creates an instance of the UpdateMetricSetRequest.Builder avoiding the need to create one manually via UpdateMetricSetRequest.builder()

Parameters:

updateMetricSetRequest - A Consumer that will call methods on UpdateMetricSetRequest.Builder to create a request.

Returns:

Result of the UpdateMetricSet operation returned by the service.

See Also:

• AWS API Documentation

create

static LookoutMetricsClient create()

Create a LookoutMetricsClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

builder

static LookoutMetricsClientBuilder builder()

Create a builder that can be used to configure and create a LookoutMetricsClient.

serviceMetadata

static ServiceMetadata serviceMetadata()

serviceClientConfiguration

default LookoutMetricsServiceClientConfiguration serviceClientConfiguration()

Description copied from interface: SdkClient

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

Specified by:

serviceClientConfiguration in interface AwsClient

Specified by:

serviceClientConfiguration in interface SdkClient

Returns:

SdkServiceClientConfiguration