Interface Iot1ClickProjectsAsyncClient

All Superinterfaces:
AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface Iot1ClickProjectsAsyncClient extends AwsClient
Service client for accessing AWS IoT 1-Click Projects asynchronously. This can be created using the static builder() method.The asynchronous client performs non-blocking I/O when configured with any SdkAsyncHttpClient supported in the SDK. However, full non-blocking is not guaranteed as the async client may perform blocking calls in some cases such as credentials retrieval and endpoint discovery as part of the async API call.

The AWS IoT 1-Click Projects API Reference

  • Field Details

  • Method Details

    • associateDeviceWithPlacement

      default CompletableFuture<AssociateDeviceWithPlacementResponse> associateDeviceWithPlacement(AssociateDeviceWithPlacementRequest associateDeviceWithPlacementRequest)

      Associates a physical device with a placement.

      Parameters:
      associateDeviceWithPlacementRequest -
      Returns:
      A Java Future containing the result of the AssociateDeviceWithPlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceConflictException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • associateDeviceWithPlacement

      default CompletableFuture<AssociateDeviceWithPlacementResponse> associateDeviceWithPlacement(Consumer<AssociateDeviceWithPlacementRequest.Builder> associateDeviceWithPlacementRequest)

      Associates a physical device with a placement.


      This is a convenience which creates an instance of the AssociateDeviceWithPlacementRequest.Builder avoiding the need to create one manually via AssociateDeviceWithPlacementRequest.builder()

      Parameters:
      associateDeviceWithPlacementRequest - A Consumer that will call methods on AssociateDeviceWithPlacementRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the AssociateDeviceWithPlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceConflictException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createPlacement

      default CompletableFuture<CreatePlacementResponse> createPlacement(CreatePlacementRequest createPlacementRequest)

      Creates an empty placement.

      Parameters:
      createPlacementRequest -
      Returns:
      A Java Future containing the result of the CreatePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceConflictException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createPlacement

      default CompletableFuture<CreatePlacementResponse> createPlacement(Consumer<CreatePlacementRequest.Builder> createPlacementRequest)

      Creates an empty placement.


      This is a convenience which creates an instance of the CreatePlacementRequest.Builder avoiding the need to create one manually via CreatePlacementRequest.builder()

      Parameters:
      createPlacementRequest - A Consumer that will call methods on CreatePlacementRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreatePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceConflictException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createProject

      default CompletableFuture<CreateProjectResponse> createProject(CreateProjectRequest createProjectRequest)

      Creates an empty project with a placement template. A project contains zero or more placements that adhere to the placement template defined in the project.

      Parameters:
      createProjectRequest -
      Returns:
      A Java Future containing the result of the CreateProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceConflictException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createProject

      default CompletableFuture<CreateProjectResponse> createProject(Consumer<CreateProjectRequest.Builder> createProjectRequest)

      Creates an empty project with a placement template. A project contains zero or more placements that adhere to the placement template defined in the project.


      This is a convenience which creates an instance of the CreateProjectRequest.Builder avoiding the need to create one manually via CreateProjectRequest.builder()

      Parameters:
      createProjectRequest - A Consumer that will call methods on CreateProjectRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceConflictException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deletePlacement

      default CompletableFuture<DeletePlacementResponse> deletePlacement(DeletePlacementRequest deletePlacementRequest)

      Deletes a placement. To delete a placement, it must not have any devices associated with it.

      When you delete a placement, all associated data becomes irretrievable.

      Parameters:
      deletePlacementRequest -
      Returns:
      A Java Future containing the result of the DeletePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deletePlacement

      default CompletableFuture<DeletePlacementResponse> deletePlacement(Consumer<DeletePlacementRequest.Builder> deletePlacementRequest)

      Deletes a placement. To delete a placement, it must not have any devices associated with it.

      When you delete a placement, all associated data becomes irretrievable.


      This is a convenience which creates an instance of the DeletePlacementRequest.Builder avoiding the need to create one manually via DeletePlacementRequest.builder()

      Parameters:
      deletePlacementRequest - A Consumer that will call methods on DeletePlacementRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeletePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteProject

      default CompletableFuture<DeleteProjectResponse> deleteProject(DeleteProjectRequest deleteProjectRequest)

      Deletes a project. To delete a project, it must not have any placements associated with it.

      When you delete a project, all associated data becomes irretrievable.

      Parameters:
      deleteProjectRequest -
      Returns:
      A Java Future containing the result of the DeleteProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteProject

      default CompletableFuture<DeleteProjectResponse> deleteProject(Consumer<DeleteProjectRequest.Builder> deleteProjectRequest)

      Deletes a project. To delete a project, it must not have any placements associated with it.

      When you delete a project, all associated data becomes irretrievable.


      This is a convenience which creates an instance of the DeleteProjectRequest.Builder avoiding the need to create one manually via DeleteProjectRequest.builder()

      Parameters:
      deleteProjectRequest - A Consumer that will call methods on DeleteProjectRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describePlacement

      default CompletableFuture<DescribePlacementResponse> describePlacement(DescribePlacementRequest describePlacementRequest)

      Describes a placement in a project.

      Parameters:
      describePlacementRequest -
      Returns:
      A Java Future containing the result of the DescribePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describePlacement

      default CompletableFuture<DescribePlacementResponse> describePlacement(Consumer<DescribePlacementRequest.Builder> describePlacementRequest)

      Describes a placement in a project.


      This is a convenience which creates an instance of the DescribePlacementRequest.Builder avoiding the need to create one manually via DescribePlacementRequest.builder()

      Parameters:
      describePlacementRequest - A Consumer that will call methods on DescribePlacementRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeProject

      default CompletableFuture<DescribeProjectResponse> describeProject(DescribeProjectRequest describeProjectRequest)

      Returns an object describing a project.

      Parameters:
      describeProjectRequest -
      Returns:
      A Java Future containing the result of the DescribeProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeProject

      default CompletableFuture<DescribeProjectResponse> describeProject(Consumer<DescribeProjectRequest.Builder> describeProjectRequest)

      Returns an object describing a project.


      This is a convenience which creates an instance of the DescribeProjectRequest.Builder avoiding the need to create one manually via DescribeProjectRequest.builder()

      Parameters:
      describeProjectRequest - A Consumer that will call methods on DescribeProjectRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateDeviceFromPlacement

      default CompletableFuture<DisassociateDeviceFromPlacementResponse> disassociateDeviceFromPlacement(DisassociateDeviceFromPlacementRequest disassociateDeviceFromPlacementRequest)

      Removes a physical device from a placement.

      Parameters:
      disassociateDeviceFromPlacementRequest -
      Returns:
      A Java Future containing the result of the DisassociateDeviceFromPlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateDeviceFromPlacement

      default CompletableFuture<DisassociateDeviceFromPlacementResponse> disassociateDeviceFromPlacement(Consumer<DisassociateDeviceFromPlacementRequest.Builder> disassociateDeviceFromPlacementRequest)

      Removes a physical device from a placement.


      This is a convenience which creates an instance of the DisassociateDeviceFromPlacementRequest.Builder avoiding the need to create one manually via DisassociateDeviceFromPlacementRequest.builder()

      Parameters:
      disassociateDeviceFromPlacementRequest - A Consumer that will call methods on DisassociateDeviceFromPlacementRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DisassociateDeviceFromPlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getDevicesInPlacement

      default CompletableFuture<GetDevicesInPlacementResponse> getDevicesInPlacement(GetDevicesInPlacementRequest getDevicesInPlacementRequest)

      Returns an object enumerating the devices in a placement.

      Parameters:
      getDevicesInPlacementRequest -
      Returns:
      A Java Future containing the result of the GetDevicesInPlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getDevicesInPlacement

      default CompletableFuture<GetDevicesInPlacementResponse> getDevicesInPlacement(Consumer<GetDevicesInPlacementRequest.Builder> getDevicesInPlacementRequest)

      Returns an object enumerating the devices in a placement.


      This is a convenience which creates an instance of the GetDevicesInPlacementRequest.Builder avoiding the need to create one manually via GetDevicesInPlacementRequest.builder()

      Parameters:
      getDevicesInPlacementRequest - A Consumer that will call methods on GetDevicesInPlacementRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetDevicesInPlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listPlacements

      default CompletableFuture<ListPlacementsResponse> listPlacements(ListPlacementsRequest listPlacementsRequest)

      Lists the placement(s) of a project.

      Parameters:
      listPlacementsRequest -
      Returns:
      A Java Future containing the result of the ListPlacements operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listPlacements

      default CompletableFuture<ListPlacementsResponse> listPlacements(Consumer<ListPlacementsRequest.Builder> listPlacementsRequest)

      Lists the placement(s) of a project.


      This is a convenience which creates an instance of the ListPlacementsRequest.Builder avoiding the need to create one manually via ListPlacementsRequest.builder()

      Parameters:
      listPlacementsRequest - A Consumer that will call methods on ListPlacementsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListPlacements operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listPlacementsPaginator

      default ListPlacementsPublisher listPlacementsPaginator(ListPlacementsRequest listPlacementsRequest)

      This is a variant of listPlacements(software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListPlacementsPublisher publisher = client.listPlacementsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListPlacementsPublisher publisher = client.listPlacementsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listPlacements(software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsRequest) operation.

      Parameters:
      listPlacementsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listPlacementsPaginator

      default ListPlacementsPublisher listPlacementsPaginator(Consumer<ListPlacementsRequest.Builder> listPlacementsRequest)

      This is a variant of listPlacements(software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListPlacementsPublisher publisher = client.listPlacementsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListPlacementsPublisher publisher = client.listPlacementsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listPlacements(software.amazon.awssdk.services.iot1clickprojects.model.ListPlacementsRequest) operation.


      This is a convenience which creates an instance of the ListPlacementsRequest.Builder avoiding the need to create one manually via ListPlacementsRequest.builder()

      Parameters:
      listPlacementsRequest - A Consumer that will call methods on ListPlacementsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listProjects

      default CompletableFuture<ListProjectsResponse> listProjects(ListProjectsRequest listProjectsRequest)

      Lists the AWS IoT 1-Click project(s) associated with your AWS account and region.

      Parameters:
      listProjectsRequest -
      Returns:
      A Java Future containing the result of the ListProjects operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listProjects

      default CompletableFuture<ListProjectsResponse> listProjects(Consumer<ListProjectsRequest.Builder> listProjectsRequest)

      Lists the AWS IoT 1-Click project(s) associated with your AWS account and region.


      This is a convenience which creates an instance of the ListProjectsRequest.Builder avoiding the need to create one manually via ListProjectsRequest.builder()

      Parameters:
      listProjectsRequest - A Consumer that will call methods on ListProjectsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListProjects operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listProjects

      default CompletableFuture<ListProjectsResponse> listProjects()

      Lists the AWS IoT 1-Click project(s) associated with your AWS account and region.

      Returns:
      A Java Future containing the result of the ListProjects operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listProjectsPaginator

      default ListProjectsPublisher listProjectsPaginator()

      This is a variant of listProjects(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListProjectsPublisher publisher = client.listProjectsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListProjectsPublisher publisher = client.listProjectsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listProjects(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsRequest) operation.

      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listProjectsPaginator

      default ListProjectsPublisher listProjectsPaginator(ListProjectsRequest listProjectsRequest)

      This is a variant of listProjects(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListProjectsPublisher publisher = client.listProjectsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListProjectsPublisher publisher = client.listProjectsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listProjects(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsRequest) operation.

      Parameters:
      listProjectsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listProjectsPaginator

      default ListProjectsPublisher listProjectsPaginator(Consumer<ListProjectsRequest.Builder> listProjectsRequest)

      This is a variant of listProjects(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListProjectsPublisher publisher = client.listProjectsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.iot1clickprojects.paginators.ListProjectsPublisher publisher = client.listProjectsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listProjects(software.amazon.awssdk.services.iot1clickprojects.model.ListProjectsRequest) operation.


      This is a convenience which creates an instance of the ListProjectsRequest.Builder avoiding the need to create one manually via ListProjectsRequest.builder()

      Parameters:
      listProjectsRequest - A Consumer that will call methods on ListProjectsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)

      Lists the tags (metadata key/value pairs) which you have assigned to the resource.

      Parameters:
      listTagsForResourceRequest -
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)

      Lists the tags (metadata key/value pairs) which you have assigned to the resource.


      This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()

      Parameters:
      listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(TagResourceRequest tagResourceRequest)

      Creates or modifies tags for a resource. Tags are key/value pairs (metadata) that can be used to manage a resource. For more information, see AWS Tagging Strategies.

      Parameters:
      tagResourceRequest -
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)

      Creates or modifies tags for a resource. Tags are key/value pairs (metadata) that can be used to manage a resource. For more information, see AWS Tagging Strategies.


      This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()

      Parameters:
      tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest)

      Removes one or more tags (metadata key/value pairs) from a resource.

      Parameters:
      untagResourceRequest -
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)

      Removes one or more tags (metadata key/value pairs) from a resource.


      This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()

      Parameters:
      untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updatePlacement

      default CompletableFuture<UpdatePlacementResponse> updatePlacement(UpdatePlacementRequest updatePlacementRequest)

      Updates a placement with the given attributes. To clear an attribute, pass an empty value (i.e., "").

      Parameters:
      updatePlacementRequest -
      Returns:
      A Java Future containing the result of the UpdatePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updatePlacement

      default CompletableFuture<UpdatePlacementResponse> updatePlacement(Consumer<UpdatePlacementRequest.Builder> updatePlacementRequest)

      Updates a placement with the given attributes. To clear an attribute, pass an empty value (i.e., "").


      This is a convenience which creates an instance of the UpdatePlacementRequest.Builder avoiding the need to create one manually via UpdatePlacementRequest.builder()

      Parameters:
      updatePlacementRequest - A Consumer that will call methods on UpdatePlacementRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdatePlacement operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateProject

      default CompletableFuture<UpdateProjectResponse> updateProject(UpdateProjectRequest updateProjectRequest)

      Updates a project associated with your AWS account and region. With the exception of device template names, you can pass just the values that need to be updated because the update request will change only the values that are provided. To clear a value, pass the empty string (i.e., "").

      Parameters:
      updateProjectRequest -
      Returns:
      A Java Future containing the result of the UpdateProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateProject

      default CompletableFuture<UpdateProjectResponse> updateProject(Consumer<UpdateProjectRequest.Builder> updateProjectRequest)

      Updates a project associated with your AWS account and region. With the exception of device template names, you can pass just the values that need to be updated because the update request will change only the values that are provided. To clear a value, pass the empty string (i.e., "").


      This is a convenience which creates an instance of the UpdateProjectRequest.Builder avoiding the need to create one manually via UpdateProjectRequest.builder()

      Parameters:
      updateProjectRequest - A Consumer that will call methods on UpdateProjectRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateProject operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions. The exception returned is wrapped with CompletionException, so you need to invoke Throwable.getCause() to retrieve the underlying exception.
      • InternalFailureException
      • InvalidRequestException
      • ResourceNotFoundException
      • TooManyRequestsException
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • Iot1ClickProjectsException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • serviceClientConfiguration

      default Iot1ClickProjectsServiceClientConfiguration serviceClientConfiguration()
      Description copied from interface: SdkClient
      The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
      Specified by:
      serviceClientConfiguration in interface AwsClient
      Specified by:
      serviceClientConfiguration in interface SdkClient
      Returns:
      SdkServiceClientConfiguration

    • create

      static Iot1ClickProjectsAsyncClient create()
      Create a Iot1ClickProjectsAsyncClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

    • builder

      static Iot1ClickProjectsAsyncClientBuilder builder()
      Create a builder that can be used to configure and create a Iot1ClickProjectsAsyncClient.