All Superinterfaces:: AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface EcsClient extends AwsClient

Service client for accessing Amazon ECS. This can be created using the static builder() method. Amazon Elastic Container Service

Amazon Elastic Container Service (Amazon ECS) is a highly scalable, fast, container management service. It makes it easy to run, stop, and manage Docker containers. You can host your cluster on a serverless infrastructure that's managed by Amazon ECS by launching your services or tasks on Fargate. For more control, you can host your tasks on a cluster of Amazon Elastic Compute Cloud (Amazon EC2) or External (on-premises) instances that you manage.

Amazon ECS makes it easy to launch and stop container-based applications with simple API calls. This makes it easy to get the state of your cluster from a centralized service, and gives you access to many familiar Amazon EC2 features.

You can use Amazon ECS to schedule the placement of containers across your cluster based on your resource needs, isolation policies, and availability requirements. With Amazon ECS, you don't need to operate your own cluster management and configuration management systems. You also don't need to worry about scaling your management infrastructure.

Field Summary

Fields

Modifier and Type

Field

Description

static final String

SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

static final String

SERVICE_NAME
Method Summary

Modifier and Type

Method

Description

static EcsClientBuilder

builder()

Create a builder that can be used to configure and create a EcsClient.

static EcsClient

create()

Create a EcsClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

default CreateCapacityProviderResponse

createCapacityProvider(Consumer<CreateCapacityProviderRequest.Builder> createCapacityProviderRequest)

Creates a new capacity provider.

default CreateCapacityProviderResponse

createCapacityProvider(CreateCapacityProviderRequest createCapacityProviderRequest)

Creates a new capacity provider.

default CreateClusterResponse

createCluster()

Creates a new Amazon ECS cluster.

default CreateClusterResponse

createCluster(Consumer<CreateClusterRequest.Builder> createClusterRequest)

Creates a new Amazon ECS cluster.

default CreateClusterResponse

createCluster(CreateClusterRequest createClusterRequest)

Creates a new Amazon ECS cluster.

default CreateServiceResponse

createService(Consumer<CreateServiceRequest.Builder> createServiceRequest)

Runs and maintains your desired number of tasks from a specified task definition.

default CreateServiceResponse

createService(CreateServiceRequest createServiceRequest)

Runs and maintains your desired number of tasks from a specified task definition.

default CreateTaskSetResponse

createTaskSet(Consumer<CreateTaskSetRequest.Builder> createTaskSetRequest)

Create a task set in the specified cluster and service.

default CreateTaskSetResponse

createTaskSet(CreateTaskSetRequest createTaskSetRequest)

Create a task set in the specified cluster and service.

default DeleteAccountSettingResponse

deleteAccountSetting(Consumer<DeleteAccountSettingRequest.Builder> deleteAccountSettingRequest)

Disables an account setting for a specified user, role, or the root user for an account.

default DeleteAccountSettingResponse

deleteAccountSetting(DeleteAccountSettingRequest deleteAccountSettingRequest)

Disables an account setting for a specified user, role, or the root user for an account.

default DeleteAttributesResponse

deleteAttributes(Consumer<DeleteAttributesRequest.Builder> deleteAttributesRequest)

Deletes one or more custom attributes from an Amazon ECS resource.

default DeleteAttributesResponse

deleteAttributes(DeleteAttributesRequest deleteAttributesRequest)

Deletes one or more custom attributes from an Amazon ECS resource.

default DeleteCapacityProviderResponse

deleteCapacityProvider(Consumer<DeleteCapacityProviderRequest.Builder> deleteCapacityProviderRequest)

Deletes the specified capacity provider.

default DeleteCapacityProviderResponse

deleteCapacityProvider(DeleteCapacityProviderRequest deleteCapacityProviderRequest)

Deletes the specified capacity provider.

default DeleteClusterResponse

deleteCluster(Consumer<DeleteClusterRequest.Builder> deleteClusterRequest)

Deletes the specified cluster.

default DeleteClusterResponse

deleteCluster(DeleteClusterRequest deleteClusterRequest)

Deletes the specified cluster.

default DeleteServiceResponse

deleteService(Consumer<DeleteServiceRequest.Builder> deleteServiceRequest)

Deletes a specified service within a cluster.

default DeleteServiceResponse

deleteService(DeleteServiceRequest deleteServiceRequest)

Deletes a specified service within a cluster.

default DeleteTaskDefinitionsResponse

deleteTaskDefinitions(Consumer<DeleteTaskDefinitionsRequest.Builder> deleteTaskDefinitionsRequest)

Deletes one or more task definitions.

default DeleteTaskDefinitionsResponse

deleteTaskDefinitions(DeleteTaskDefinitionsRequest deleteTaskDefinitionsRequest)

Deletes one or more task definitions.

default DeleteTaskSetResponse

deleteTaskSet(Consumer<DeleteTaskSetRequest.Builder> deleteTaskSetRequest)

Deletes a specified task set within a service.

default DeleteTaskSetResponse

deleteTaskSet(DeleteTaskSetRequest deleteTaskSetRequest)

Deletes a specified task set within a service.

default DeregisterContainerInstanceResponse

deregisterContainerInstance(Consumer<DeregisterContainerInstanceRequest.Builder> deregisterContainerInstanceRequest)

Deregisters an Amazon ECS container instance from the specified cluster.

default DeregisterContainerInstanceResponse

deregisterContainerInstance(DeregisterContainerInstanceRequest deregisterContainerInstanceRequest)

Deregisters an Amazon ECS container instance from the specified cluster.

default DeregisterTaskDefinitionResponse

deregisterTaskDefinition(Consumer<DeregisterTaskDefinitionRequest.Builder> deregisterTaskDefinitionRequest)

Deregisters the specified task definition by family and revision.

default DeregisterTaskDefinitionResponse

deregisterTaskDefinition(DeregisterTaskDefinitionRequest deregisterTaskDefinitionRequest)

Deregisters the specified task definition by family and revision.

default DescribeCapacityProvidersResponse

describeCapacityProviders(Consumer<DescribeCapacityProvidersRequest.Builder> describeCapacityProvidersRequest)

Describes one or more of your capacity providers.

default DescribeCapacityProvidersResponse

describeCapacityProviders(DescribeCapacityProvidersRequest describeCapacityProvidersRequest)

Describes one or more of your capacity providers.

default DescribeClustersResponse

describeClusters()

Describes one or more of your clusters.

default DescribeClustersResponse

describeClusters(Consumer<DescribeClustersRequest.Builder> describeClustersRequest)

Describes one or more of your clusters.

default DescribeClustersResponse

describeClusters(DescribeClustersRequest describeClustersRequest)

Describes one or more of your clusters.

default DescribeContainerInstancesResponse

describeContainerInstances(Consumer<DescribeContainerInstancesRequest.Builder> describeContainerInstancesRequest)

Describes one or more container instances.

default DescribeContainerInstancesResponse

describeContainerInstances(DescribeContainerInstancesRequest describeContainerInstancesRequest)

Describes one or more container instances.

default DescribeServicesResponse

describeServices(Consumer<DescribeServicesRequest.Builder> describeServicesRequest)

Describes the specified services running in your cluster.

default DescribeServicesResponse

describeServices(DescribeServicesRequest describeServicesRequest)

Describes the specified services running in your cluster.

default DescribeTaskDefinitionResponse

describeTaskDefinition(Consumer<DescribeTaskDefinitionRequest.Builder> describeTaskDefinitionRequest)

Describes a task definition.

default DescribeTaskDefinitionResponse

describeTaskDefinition(DescribeTaskDefinitionRequest describeTaskDefinitionRequest)

Describes a task definition.

default DescribeTasksResponse

describeTasks(Consumer<DescribeTasksRequest.Builder> describeTasksRequest)

Describes a specified task or tasks.

default DescribeTasksResponse

describeTasks(DescribeTasksRequest describeTasksRequest)

Describes a specified task or tasks.

default DescribeTaskSetsResponse

describeTaskSets(Consumer<DescribeTaskSetsRequest.Builder> describeTaskSetsRequest)

Describes the task sets in the specified cluster and service.

default DescribeTaskSetsResponse

describeTaskSets(DescribeTaskSetsRequest describeTaskSetsRequest)

Describes the task sets in the specified cluster and service.

default DiscoverPollEndpointResponse

discoverPollEndpoint(Consumer<DiscoverPollEndpointRequest.Builder> discoverPollEndpointRequest)

default DiscoverPollEndpointResponse

discoverPollEndpoint(DiscoverPollEndpointRequest discoverPollEndpointRequest)

default ExecuteCommandResponse

executeCommand(Consumer<ExecuteCommandRequest.Builder> executeCommandRequest)

Runs a command remotely on a container within a task.

default ExecuteCommandResponse

executeCommand(ExecuteCommandRequest executeCommandRequest)

Runs a command remotely on a container within a task.

default GetTaskProtectionResponse

getTaskProtection(Consumer<GetTaskProtectionRequest.Builder> getTaskProtectionRequest)

Retrieves the protection status of tasks in an Amazon ECS service.

default GetTaskProtectionResponse

getTaskProtection(GetTaskProtectionRequest getTaskProtectionRequest)

Retrieves the protection status of tasks in an Amazon ECS service.

default ListAccountSettingsResponse

listAccountSettings()

Lists the account settings for a specified principal.

default ListAccountSettingsResponse

listAccountSettings(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest)

Lists the account settings for a specified principal.

default ListAccountSettingsResponse

listAccountSettings(ListAccountSettingsRequest listAccountSettingsRequest)

Lists the account settings for a specified principal.

default ListAccountSettingsIterable

listAccountSettingsPaginator()

This is a variant of listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.

default ListAccountSettingsIterable

listAccountSettingsPaginator(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest)

This is a variant of listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.

default ListAccountSettingsIterable

listAccountSettingsPaginator(ListAccountSettingsRequest listAccountSettingsRequest)

This is a variant of listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.

default ListAttributesResponse

listAttributes(Consumer<ListAttributesRequest.Builder> listAttributesRequest)

Lists the attributes for Amazon ECS resources within a specified target type and cluster.

default ListAttributesResponse

listAttributes(ListAttributesRequest listAttributesRequest)

Lists the attributes for Amazon ECS resources within a specified target type and cluster.

default ListAttributesIterable

listAttributesPaginator(Consumer<ListAttributesRequest.Builder> listAttributesRequest)

This is a variant of listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation.

default ListAttributesIterable

listAttributesPaginator(ListAttributesRequest listAttributesRequest)

This is a variant of listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation.

default ListClustersResponse

listClusters()

Returns a list of existing clusters.

default ListClustersResponse

listClusters(Consumer<ListClustersRequest.Builder> listClustersRequest)

Returns a list of existing clusters.

default ListClustersResponse

listClusters(ListClustersRequest listClustersRequest)

Returns a list of existing clusters.

default ListClustersIterable

listClustersPaginator()

This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.

default ListClustersIterable

listClustersPaginator(Consumer<ListClustersRequest.Builder> listClustersRequest)

This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.

default ListClustersIterable

listClustersPaginator(ListClustersRequest listClustersRequest)

This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.

default ListContainerInstancesResponse

listContainerInstances()

Returns a list of container instances in a specified cluster.

default ListContainerInstancesResponse

listContainerInstances(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest)

Returns a list of container instances in a specified cluster.

default ListContainerInstancesResponse

listContainerInstances(ListContainerInstancesRequest listContainerInstancesRequest)

Returns a list of container instances in a specified cluster.

default ListContainerInstancesIterable

listContainerInstancesPaginator()

This is a variant of listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation.

default ListContainerInstancesIterable

listContainerInstancesPaginator(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest)

This is a variant of listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation.

default ListContainerInstancesIterable

listContainerInstancesPaginator(ListContainerInstancesRequest listContainerInstancesRequest)

This is a variant of listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation.

default ListServicesResponse

listServices()

Returns a list of services.

default ListServicesResponse

listServices(Consumer<ListServicesRequest.Builder> listServicesRequest)

Returns a list of services.

default ListServicesResponse

listServices(ListServicesRequest listServicesRequest)

Returns a list of services.

default ListServicesByNamespaceResponse

listServicesByNamespace(Consumer<ListServicesByNamespaceRequest.Builder> listServicesByNamespaceRequest)

This operation lists all of the services that are associated with a Cloud Map namespace.

default ListServicesByNamespaceResponse

listServicesByNamespace(ListServicesByNamespaceRequest listServicesByNamespaceRequest)

This operation lists all of the services that are associated with a Cloud Map namespace.

default ListServicesByNamespaceIterable

listServicesByNamespacePaginator(Consumer<ListServicesByNamespaceRequest.Builder> listServicesByNamespaceRequest)

This is a variant of listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest) operation.

default ListServicesByNamespaceIterable

listServicesByNamespacePaginator(ListServicesByNamespaceRequest listServicesByNamespaceRequest)

This is a variant of listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest) operation.

default ListServicesIterable

listServicesPaginator()

This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.

default ListServicesIterable

listServicesPaginator(Consumer<ListServicesRequest.Builder> listServicesRequest)

This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.

default ListServicesIterable

listServicesPaginator(ListServicesRequest listServicesRequest)

This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.

default ListTagsForResourceResponse

listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)

List the tags for an Amazon ECS resource.

default ListTagsForResourceResponse

listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)

List the tags for an Amazon ECS resource.

default ListTaskDefinitionFamiliesResponse

listTaskDefinitionFamilies()

Returns a list of task definition families that are registered to your account.

default ListTaskDefinitionFamiliesResponse

listTaskDefinitionFamilies(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest)

Returns a list of task definition families that are registered to your account.

default ListTaskDefinitionFamiliesResponse

listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest)

Returns a list of task definition families that are registered to your account.

default ListTaskDefinitionFamiliesIterable

listTaskDefinitionFamiliesPaginator()

This is a variant of listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation.

default ListTaskDefinitionFamiliesIterable

listTaskDefinitionFamiliesPaginator(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest)

This is a variant of listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation.

default ListTaskDefinitionFamiliesIterable

listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest)

This is a variant of listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation.

default ListTaskDefinitionsResponse

listTaskDefinitions()

Returns a list of task definitions that are registered to your account.

default ListTaskDefinitionsResponse

listTaskDefinitions(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest)

Returns a list of task definitions that are registered to your account.

default ListTaskDefinitionsResponse

listTaskDefinitions(ListTaskDefinitionsRequest listTaskDefinitionsRequest)

Returns a list of task definitions that are registered to your account.

default ListTaskDefinitionsIterable

listTaskDefinitionsPaginator()

This is a variant of listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.

default ListTaskDefinitionsIterable

listTaskDefinitionsPaginator(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest)

This is a variant of listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.

default ListTaskDefinitionsIterable

listTaskDefinitionsPaginator(ListTaskDefinitionsRequest listTaskDefinitionsRequest)

This is a variant of listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.

default ListTasksResponse

listTasks()

Returns a list of tasks.

default ListTasksResponse

listTasks(Consumer<ListTasksRequest.Builder> listTasksRequest)

Returns a list of tasks.

default ListTasksResponse

listTasks(ListTasksRequest listTasksRequest)

Returns a list of tasks.

default ListTasksIterable

listTasksPaginator()

This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.

default ListTasksIterable

listTasksPaginator(Consumer<ListTasksRequest.Builder> listTasksRequest)

This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.

default ListTasksIterable

listTasksPaginator(ListTasksRequest listTasksRequest)

This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.

default PutAccountSettingResponse

putAccountSetting(Consumer<PutAccountSettingRequest.Builder> putAccountSettingRequest)

Modifies an account setting.

default PutAccountSettingResponse

putAccountSetting(PutAccountSettingRequest putAccountSettingRequest)

Modifies an account setting.

default PutAccountSettingDefaultResponse

putAccountSettingDefault(Consumer<PutAccountSettingDefaultRequest.Builder> putAccountSettingDefaultRequest)

Modifies an account setting for all users on an account for whom no individual account setting has been specified.

default PutAccountSettingDefaultResponse

putAccountSettingDefault(PutAccountSettingDefaultRequest putAccountSettingDefaultRequest)

Modifies an account setting for all users on an account for whom no individual account setting has been specified.

default PutAttributesResponse

putAttributes(Consumer<PutAttributesRequest.Builder> putAttributesRequest)

Create or update an attribute on an Amazon ECS resource.

default PutAttributesResponse

putAttributes(PutAttributesRequest putAttributesRequest)

Create or update an attribute on an Amazon ECS resource.

default PutClusterCapacityProvidersResponse

putClusterCapacityProviders(Consumer<PutClusterCapacityProvidersRequest.Builder> putClusterCapacityProvidersRequest)

Modifies the available capacity providers and the default capacity provider strategy for a cluster.

default PutClusterCapacityProvidersResponse

putClusterCapacityProviders(PutClusterCapacityProvidersRequest putClusterCapacityProvidersRequest)

Modifies the available capacity providers and the default capacity provider strategy for a cluster.

default RegisterContainerInstanceResponse

registerContainerInstance(Consumer<RegisterContainerInstanceRequest.Builder> registerContainerInstanceRequest)

default RegisterContainerInstanceResponse

registerContainerInstance(RegisterContainerInstanceRequest registerContainerInstanceRequest)

default RegisterTaskDefinitionResponse

registerTaskDefinition(Consumer<RegisterTaskDefinitionRequest.Builder> registerTaskDefinitionRequest)

Registers a new task definition from the supplied family and containerDefinitions.

default RegisterTaskDefinitionResponse

registerTaskDefinition(RegisterTaskDefinitionRequest registerTaskDefinitionRequest)

Registers a new task definition from the supplied family and containerDefinitions.

default RunTaskResponse

runTask(Consumer<RunTaskRequest.Builder> runTaskRequest)

Starts a new task using the specified task definition.

default RunTaskResponse

runTask(RunTaskRequest runTaskRequest)

Starts a new task using the specified task definition.

default EcsServiceClientConfiguration

serviceClientConfiguration()

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

static ServiceMetadata

serviceMetadata()

default StartTaskResponse

startTask(Consumer<StartTaskRequest.Builder> startTaskRequest)

Starts a new task from the specified task definition on the specified container instance or instances.

default StartTaskResponse

startTask(StartTaskRequest startTaskRequest)

Starts a new task from the specified task definition on the specified container instance or instances.

default StopTaskResponse

stopTask(Consumer<StopTaskRequest.Builder> stopTaskRequest)

Stops a running task.

default StopTaskResponse

stopTask(StopTaskRequest stopTaskRequest)

Stops a running task.

default SubmitAttachmentStateChangesResponse

submitAttachmentStateChanges(Consumer<SubmitAttachmentStateChangesRequest.Builder> submitAttachmentStateChangesRequest)

default SubmitAttachmentStateChangesResponse

submitAttachmentStateChanges(SubmitAttachmentStateChangesRequest submitAttachmentStateChangesRequest)

default SubmitContainerStateChangeResponse

submitContainerStateChange(Consumer<SubmitContainerStateChangeRequest.Builder> submitContainerStateChangeRequest)

default SubmitContainerStateChangeResponse

submitContainerStateChange(SubmitContainerStateChangeRequest submitContainerStateChangeRequest)

default SubmitTaskStateChangeResponse

submitTaskStateChange(Consumer<SubmitTaskStateChangeRequest.Builder> submitTaskStateChangeRequest)

default SubmitTaskStateChangeResponse

submitTaskStateChange(SubmitTaskStateChangeRequest submitTaskStateChangeRequest)

default TagResourceResponse

tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)

Associates the specified tags to a resource with the specified resourceArn.

default TagResourceResponse

tagResource(TagResourceRequest tagResourceRequest)

Associates the specified tags to a resource with the specified resourceArn.

default UntagResourceResponse

untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)

Deletes specified tags from a resource.

default UntagResourceResponse

untagResource(UntagResourceRequest untagResourceRequest)

Deletes specified tags from a resource.

default UpdateCapacityProviderResponse

updateCapacityProvider(Consumer<UpdateCapacityProviderRequest.Builder> updateCapacityProviderRequest)

Modifies the parameters for a capacity provider.

default UpdateCapacityProviderResponse

updateCapacityProvider(UpdateCapacityProviderRequest updateCapacityProviderRequest)

Modifies the parameters for a capacity provider.

default UpdateClusterResponse

updateCluster(Consumer<UpdateClusterRequest.Builder> updateClusterRequest)

Updates the cluster.

default UpdateClusterResponse

updateCluster(UpdateClusterRequest updateClusterRequest)

Updates the cluster.

default UpdateClusterSettingsResponse

updateClusterSettings(Consumer<UpdateClusterSettingsRequest.Builder> updateClusterSettingsRequest)

Modifies the settings to use for a cluster.

default UpdateClusterSettingsResponse

updateClusterSettings(UpdateClusterSettingsRequest updateClusterSettingsRequest)

Modifies the settings to use for a cluster.

default UpdateContainerAgentResponse

updateContainerAgent(Consumer<UpdateContainerAgentRequest.Builder> updateContainerAgentRequest)

Updates the Amazon ECS container agent on a specified container instance.

default UpdateContainerAgentResponse

updateContainerAgent(UpdateContainerAgentRequest updateContainerAgentRequest)

Updates the Amazon ECS container agent on a specified container instance.

default UpdateContainerInstancesStateResponse

updateContainerInstancesState(Consumer<UpdateContainerInstancesStateRequest.Builder> updateContainerInstancesStateRequest)

Modifies the status of an Amazon ECS container instance.

default UpdateContainerInstancesStateResponse

updateContainerInstancesState(UpdateContainerInstancesStateRequest updateContainerInstancesStateRequest)

Modifies the status of an Amazon ECS container instance.

default UpdateServiceResponse

updateService(Consumer<UpdateServiceRequest.Builder> updateServiceRequest)

Modifies the parameters of a service.

default UpdateServiceResponse

updateService(UpdateServiceRequest updateServiceRequest)

Modifies the parameters of a service.

default UpdateServicePrimaryTaskSetResponse

updateServicePrimaryTaskSet(Consumer<UpdateServicePrimaryTaskSetRequest.Builder> updateServicePrimaryTaskSetRequest)

Modifies which task set in a service is the primary task set.

default UpdateServicePrimaryTaskSetResponse

updateServicePrimaryTaskSet(UpdateServicePrimaryTaskSetRequest updateServicePrimaryTaskSetRequest)

Modifies which task set in a service is the primary task set.

default UpdateTaskProtectionResponse

updateTaskProtection(Consumer<UpdateTaskProtectionRequest.Builder> updateTaskProtectionRequest)

Updates the protection status of a task.

default UpdateTaskProtectionResponse

updateTaskProtection(UpdateTaskProtectionRequest updateTaskProtectionRequest)

Updates the protection status of a task.

default UpdateTaskSetResponse

updateTaskSet(Consumer<UpdateTaskSetRequest.Builder> updateTaskSetRequest)

Modifies a task set.

default UpdateTaskSetResponse

updateTaskSet(UpdateTaskSetRequest updateTaskSetRequest)

Modifies a task set.

default EcsWaiter

waiter()

Create an instance of EcsWaiter using this client.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Field Details
- SERVICE_NAME
  static final String SERVICE_NAME
  
  See Also:
  
  Constant Field Values
- SERVICE_METADATA_ID
  static final String SERVICE_METADATA_ID
  
  Value for looking up the service's metadata from the ServiceMetadataProvider.
  
  See Also:
  
  Constant Field Values
Method Details
- createCapacityProvider
  default CreateCapacityProviderResponse createCapacityProvider(CreateCapacityProviderRequest createCapacityProviderRequest) throws ServerException, ClientException, InvalidParameterException, LimitExceededException, UpdateInProgressException, AwsServiceException, SdkClientException, EcsException
  
  Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in capacity provider strategies to facilitate cluster auto scaling.
  
  Only capacity providers that use an Auto Scaling group can be created. Amazon ECS tasks on Fargate use the FARGATE and FARGATE_SPOT capacity providers. These providers are available to all accounts in the Amazon Web Services Regions that Fargate supports.
  
  Parameters:
  
  createCapacityProviderRequest -
  
  Returns:
  
  Result of the CreateCapacityProvider operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createCapacityProvider
  default CreateCapacityProviderResponse createCapacityProvider(Consumer<CreateCapacityProviderRequest.Builder> createCapacityProviderRequest) throws ServerException, ClientException, InvalidParameterException, LimitExceededException, UpdateInProgressException, AwsServiceException, SdkClientException, EcsException
  
  Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in capacity provider strategies to facilitate cluster auto scaling.
  
  Only capacity providers that use an Auto Scaling group can be created. Amazon ECS tasks on Fargate use the FARGATE and FARGATE_SPOT capacity providers. These providers are available to all accounts in the Amazon Web Services Regions that Fargate supports.
  
  This is a convenience which creates an instance of the CreateCapacityProviderRequest.Builder avoiding the need to create one manually via CreateCapacityProviderRequest.builder()
  
  Parameters:
  
  createCapacityProviderRequest - A Consumer that will call methods on CreateCapacityProviderRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateCapacityProvider operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createCluster
  default CreateClusterResponse createCluster(CreateClusterRequest createClusterRequest) throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you launch your first container instance. However, you can create your own cluster with a unique name.
  
  When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked role for your account. This is so that it can manage required resources in other Amazon Web Services services on your behalf. However, if the user that makes the call doesn't have permissions to create the service-linked role, it isn't created. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  createClusterRequest -
  
  Returns:
  
  Result of the CreateCluster operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createCluster
  default CreateClusterResponse createCluster(Consumer<CreateClusterRequest.Builder> createClusterRequest) throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you launch your first container instance. However, you can create your own cluster with a unique name.
  
  When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked role for your account. This is so that it can manage required resources in other Amazon Web Services services on your behalf. However, if the user that makes the call doesn't have permissions to create the service-linked role, it isn't created. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the CreateClusterRequest.Builder avoiding the need to create one manually via CreateClusterRequest.builder()
  
  Parameters:
  
  createClusterRequest - A Consumer that will call methods on CreateClusterRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateCluster operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createCluster
  default CreateClusterResponse createCluster() throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you launch your first container instance. However, you can create your own cluster with a unique name.
  
  When you call the CreateCluster API operation, Amazon ECS attempts to create the Amazon ECS service-linked role for your account. This is so that it can manage required resources in other Amazon Web Services services on your behalf. However, if the user that makes the call doesn't have permissions to create the service-linked role, it isn't created. For more information, see Using service-linked roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide.
  
  Returns:
  
  Result of the CreateCluster operation returned by the service.
  
  See Also:
  
  createCluster(CreateClusterRequest)
  
  AWS API Documentation
- createService
  default CreateServiceResponse createService(CreateServiceRequest createServiceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Runs and maintains your desired number of tasks from a specified task definition. If the number of tasks running in a service drops below the desiredCount, Amazon ECS runs another copy of the task in the specified cluster. To update an existing service, use UpdateService.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  Amazon Elastic Inference (EI) is no longer available to customers.
  
  In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. volumeConfigurations is only supported for REPLICA service and not DAEMON service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the load balancer.
  
  There are two service scheduler strategies available:
  
  REPLICA - The replica scheduling strategy places and maintains your desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide.
  
  DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks. It also stops tasks that don't meet the placement constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide.
  
  You can optionally specify a deployment configuration for your service. The deployment is initiated by changing properties. For example, the deployment might be initiated by the task definition or by your desired count of a service. You can use UpdateService. The default value for a replica service for minimumHealthyPercent is 100%. The default value for a daemon service for minimumHealthyPercent is 0%.
  
  If a service uses the ECS deployment controller, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment. Specifically, it represents it as a percentage of your desired number of tasks (rounded up to the nearest integer). This happens when any of your container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter, you can deploy without using additional cluster capacity. For example, if you set your service to have desired number of four tasks and a minimum healthy percent of 50%, the scheduler might stop two existing tasks to free up cluster capacity before starting two new tasks. If they're in the RUNNING state, tasks for services that don't use a load balancer are considered healthy . If they're in the RUNNING state and reported as healthy by the load balancer, tasks for services that do use a load balancer are considered healthy . The default value for minimum healthy percent is 100%.
  
  If a service uses the ECS deployment controller, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment. Specifically, it represents it as a percentage of the desired number of tasks (rounded down to the nearest integer). This happens when any of your container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter, you can define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
  
  If a service uses either the CODE_DEPLOY or EXTERNAL deployment controller types and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are used only to define the lower and upper limit on the number of the tasks in the service that remain in the RUNNING state. This is while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't used. This is the case even if they're currently visible when describing your service.
  
  When creating a service that uses the EXTERNAL deployment controller, you can specify only parameters that aren't controlled at the task set level. The only required parameter is the service name. You control your services using the CreateTaskSet. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
  
  When the service scheduler launches new tasks, it determines task placement. For information about task placement and task placement strategies, see Amazon ECS task placement in the Amazon Elastic Container Service Developer Guide
  
  Parameters:
  
  createServiceRequest -
  
  Returns:
  
  Result of the CreateService operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createService
  default CreateServiceResponse createService(Consumer<CreateServiceRequest.Builder> createServiceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Runs and maintains your desired number of tasks from a specified task definition. If the number of tasks running in a service drops below the desiredCount, Amazon ECS runs another copy of the task in the specified cluster. To update an existing service, use UpdateService.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  Amazon Elastic Inference (EI) is no longer available to customers.
  
  In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the service. For more information, see Service load balancing in the Amazon Elastic Container Service Developer Guide.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. volumeConfigurations is only supported for REPLICA service and not DAEMON service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the load balancer.
  
  There are two service scheduler strategies available:
  
  REPLICA - The replica scheduling strategy places and maintains your desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide.
  
  DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks. It also stops tasks that don't meet the placement constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. For more information, see Service scheduler concepts in the Amazon Elastic Container Service Developer Guide.
  
  You can optionally specify a deployment configuration for your service. The deployment is initiated by changing properties. For example, the deployment might be initiated by the task definition or by your desired count of a service. You can use UpdateService. The default value for a replica service for minimumHealthyPercent is 100%. The default value for a daemon service for minimumHealthyPercent is 0%.
  
  If a service uses the ECS deployment controller, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment. Specifically, it represents it as a percentage of your desired number of tasks (rounded up to the nearest integer). This happens when any of your container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter, you can deploy without using additional cluster capacity. For example, if you set your service to have desired number of four tasks and a minimum healthy percent of 50%, the scheduler might stop two existing tasks to free up cluster capacity before starting two new tasks. If they're in the RUNNING state, tasks for services that don't use a load balancer are considered healthy . If they're in the RUNNING state and reported as healthy by the load balancer, tasks for services that do use a load balancer are considered healthy . The default value for minimum healthy percent is 100%.
  
  If a service uses the ECS deployment controller, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment. Specifically, it represents it as a percentage of the desired number of tasks (rounded down to the nearest integer). This happens when any of your container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. Using this parameter, you can define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
  
  If a service uses either the CODE_DEPLOY or EXTERNAL deployment controller types and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are used only to define the lower and upper limit on the number of the tasks in the service that remain in the RUNNING state. This is while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't used. This is the case even if they're currently visible when describing your service.
  
  When creating a service that uses the EXTERNAL deployment controller, you can specify only parameters that aren't controlled at the task set level. The only required parameter is the service name. You control your services using the CreateTaskSet. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
  
  When the service scheduler launches new tasks, it determines task placement. For information about task placement and task placement strategies, see Amazon ECS task placement in the Amazon Elastic Container Service Developer Guide
  
  This is a convenience which creates an instance of the CreateServiceRequest.Builder avoiding the need to create one manually via CreateServiceRequest.builder()
  
  Parameters:
  
  createServiceRequest - A Consumer that will call methods on CreateServiceRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateService operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createTaskSet
  default CreateTaskSetResponse createTaskSet(CreateTaskSetRequest createTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Create a task set in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  For information about the maximum number of task sets and other quotas, see Amazon ECS service quotas in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  createTaskSetRequest -
  
  Returns:
  
  Result of the CreateTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createTaskSet
  default CreateTaskSetResponse createTaskSet(Consumer<CreateTaskSetRequest.Builder> createTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Create a task set in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  For information about the maximum number of task sets and other quotas, see Amazon ECS service quotas in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the CreateTaskSetRequest.Builder avoiding the need to create one manually via CreateTaskSetRequest.builder()
  
  Parameters:
  
  createTaskSetRequest - A Consumer that will call methods on CreateTaskSetRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAccountSetting
  default DeleteAccountSettingResponse deleteAccountSetting(DeleteAccountSettingRequest deleteAccountSettingRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Disables an account setting for a specified user, role, or the root user for an account.
  
  Parameters:
  
  deleteAccountSettingRequest -
  
  Returns:
  
  Result of the DeleteAccountSetting operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAccountSetting
  default DeleteAccountSettingResponse deleteAccountSetting(Consumer<DeleteAccountSettingRequest.Builder> deleteAccountSettingRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Disables an account setting for a specified user, role, or the root user for an account.
  
  This is a convenience which creates an instance of the DeleteAccountSettingRequest.Builder avoiding the need to create one manually via DeleteAccountSettingRequest.builder()
  
  Parameters:
  
  deleteAccountSettingRequest - A Consumer that will call methods on DeleteAccountSettingRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteAccountSetting operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAttributes
  default DeleteAttributesResponse deleteAttributes(DeleteAttributesRequest deleteAttributesRequest) throws ClusterNotFoundException, TargetNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deletes one or more custom attributes from an Amazon ECS resource.
  
  Parameters:
  
  deleteAttributesRequest -
  
  Returns:
  
  Result of the DeleteAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAttributes
  default DeleteAttributesResponse deleteAttributes(Consumer<DeleteAttributesRequest.Builder> deleteAttributesRequest) throws ClusterNotFoundException, TargetNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deletes one or more custom attributes from an Amazon ECS resource.
  
  This is a convenience which creates an instance of the DeleteAttributesRequest.Builder avoiding the need to create one manually via DeleteAttributesRequest.builder()
  
  Parameters:
  
  deleteAttributesRequest - A Consumer that will call methods on DeleteAttributesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteCapacityProvider
  default DeleteCapacityProviderResponse deleteCapacityProvider(DeleteCapacityProviderRequest deleteCapacityProviderRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deletes the specified capacity provider.
  
  The FARGATE and FARGATE_SPOT capacity providers are reserved and can't be deleted. You can disassociate them from a cluster using either PutCapacityProviderProviders or by deleting the cluster.
  
  Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider strategy from all services. The UpdateService API can be used to remove a capacity provider from a service's capacity provider strategy. When updating a service, the forceNewDeployment option can be used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are transitioned to use the capacity from the remaining capacity providers. Only capacity providers that aren't associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use PutCapacityProviderProviders or delete the cluster.
  
  Parameters:
  
  deleteCapacityProviderRequest -
  
  Returns:
  
  Result of the DeleteCapacityProvider operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteCapacityProvider
  default DeleteCapacityProviderResponse deleteCapacityProvider(Consumer<DeleteCapacityProviderRequest.Builder> deleteCapacityProviderRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deletes the specified capacity provider.
  
  The FARGATE and FARGATE_SPOT capacity providers are reserved and can't be deleted. You can disassociate them from a cluster using either PutCapacityProviderProviders or by deleting the cluster.
  
  Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider strategy from all services. The UpdateService API can be used to remove a capacity provider from a service's capacity provider strategy. When updating a service, the forceNewDeployment option can be used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are transitioned to use the capacity from the remaining capacity providers. Only capacity providers that aren't associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use PutCapacityProviderProviders or delete the cluster.
  
  This is a convenience which creates an instance of the DeleteCapacityProviderRequest.Builder avoiding the need to create one manually via DeleteCapacityProviderRequest.builder()
  
  Parameters:
  
  deleteCapacityProviderRequest - A Consumer that will call methods on DeleteCapacityProviderRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteCapacityProvider operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteCluster
  default DeleteClusterResponse deleteCluster(DeleteClusterRequest deleteClusterRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ClusterContainsContainerInstancesException, ClusterContainsServicesException, ClusterContainsTasksException, UpdateInProgressException, AwsServiceException, SdkClientException, EcsException
  
  Deletes the specified cluster. The cluster transitions to the INACTIVE state. Clusters with an INACTIVE status might remain discoverable in your account for a period of time. However, this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE clusters persisting.
  
  You must deregister all container instances from this cluster before you may delete it. You can list the container instances in a cluster with ListContainerInstances and deregister them with DeregisterContainerInstance.
  
  Parameters:
  
  deleteClusterRequest -
  
  Returns:
  
  Result of the DeleteCluster operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteCluster
  default DeleteClusterResponse deleteCluster(Consumer<DeleteClusterRequest.Builder> deleteClusterRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ClusterContainsContainerInstancesException, ClusterContainsServicesException, ClusterContainsTasksException, UpdateInProgressException, AwsServiceException, SdkClientException, EcsException
  
  Deletes the specified cluster. The cluster transitions to the INACTIVE state. Clusters with an INACTIVE status might remain discoverable in your account for a period of time. However, this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE clusters persisting.
  
  You must deregister all container instances from this cluster before you may delete it. You can list the container instances in a cluster with ListContainerInstances and deregister them with DeregisterContainerInstance.
  
  This is a convenience which creates an instance of the DeleteClusterRequest.Builder avoiding the need to create one manually via DeleteClusterRequest.builder()
  
  Parameters:
  
  deleteClusterRequest - A Consumer that will call methods on DeleteClusterRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteCluster operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteService
  default DeleteServiceResponse deleteService(DeleteServiceRequest deleteServiceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you can't delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.
  
  When you delete a service, if there are still running tasks that require cleanup, the service status moves from ACTIVE to DRAINING, and the service is no longer visible in the console or in the ListServices API operation. After all tasks have transitioned to either STOPPING or STOPPED status, the service status moves from DRAINING to INACTIVE. Services in the DRAINING or INACTIVE status can still be viewed with the DescribeServices API operation. However, in the future, INACTIVE services may be cleaned up and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a ServiceNotFoundException error.
  
  If you attempt to create a new service with the same name as an existing service in either ACTIVE or DRAINING status, you receive an error.
  
  Parameters:
  
  deleteServiceRequest -
  
  Returns:
  
  Result of the DeleteService operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteService
  default DeleteServiceResponse deleteService(Consumer<DeleteServiceRequest.Builder> deleteServiceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you can't delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.
  
  When you delete a service, if there are still running tasks that require cleanup, the service status moves from ACTIVE to DRAINING, and the service is no longer visible in the console or in the ListServices API operation. After all tasks have transitioned to either STOPPING or STOPPED status, the service status moves from DRAINING to INACTIVE. Services in the DRAINING or INACTIVE status can still be viewed with the DescribeServices API operation. However, in the future, INACTIVE services may be cleaned up and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a ServiceNotFoundException error.
  
  If you attempt to create a new service with the same name as an existing service in either ACTIVE or DRAINING status, you receive an error.
  
  This is a convenience which creates an instance of the DeleteServiceRequest.Builder avoiding the need to create one manually via DeleteServiceRequest.builder()
  
  Parameters:
  
  deleteServiceRequest - A Consumer that will call methods on DeleteServiceRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteService operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTaskDefinitions
  default DeleteTaskDefinitionsResponse deleteTaskDefinitions(DeleteTaskDefinitionsRequest deleteTaskDefinitionsRequest) throws AccessDeniedException, ClientException, InvalidParameterException, ServerException, AwsServiceException, SdkClientException, EcsException
  
  Deletes one or more task definitions.
  
  You must deregister a task definition revision before you delete it. For more information, see DeregisterTaskDefinition.
  
  When you delete a task definition revision, it is immediately transitions from the INACTIVE to DELETE_IN_PROGRESS. Existing tasks and services that reference a DELETE_IN_PROGRESS task definition revision continue to run without disruption. Existing services that reference a DELETE_IN_PROGRESS task definition revision can still scale up or down by modifying the service's desired count.
  
  You can't use a DELETE_IN_PROGRESS task definition revision to run new tasks or create new services. You also can't update an existing service to reference a DELETE_IN_PROGRESS task definition revision.
  
  A task definition revision will stay in DELETE_IN_PROGRESS status until all the associated tasks and services have been terminated.
  
  When you delete all INACTIVE task definition revisions, the task definition name is not displayed in the console and not returned in the API. If a task definition revisions are in the DELETE_IN_PROGRESS state, the task definition name is displayed in the console and returned in the API. The task definition name is retained by Amazon ECS and the revision is incremented the next time you create a task definition with that name.
  
  Parameters:
  
  deleteTaskDefinitionsRequest -
  
  Returns:
  
  Result of the DeleteTaskDefinitions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTaskDefinitions
  default DeleteTaskDefinitionsResponse deleteTaskDefinitions(Consumer<DeleteTaskDefinitionsRequest.Builder> deleteTaskDefinitionsRequest) throws AccessDeniedException, ClientException, InvalidParameterException, ServerException, AwsServiceException, SdkClientException, EcsException
  
  Deletes one or more task definitions.
  
  You must deregister a task definition revision before you delete it. For more information, see DeregisterTaskDefinition.
  
  When you delete a task definition revision, it is immediately transitions from the INACTIVE to DELETE_IN_PROGRESS. Existing tasks and services that reference a DELETE_IN_PROGRESS task definition revision continue to run without disruption. Existing services that reference a DELETE_IN_PROGRESS task definition revision can still scale up or down by modifying the service's desired count.
  
  You can't use a DELETE_IN_PROGRESS task definition revision to run new tasks or create new services. You also can't update an existing service to reference a DELETE_IN_PROGRESS task definition revision.
  
  A task definition revision will stay in DELETE_IN_PROGRESS status until all the associated tasks and services have been terminated.
  
  When you delete all INACTIVE task definition revisions, the task definition name is not displayed in the console and not returned in the API. If a task definition revisions are in the DELETE_IN_PROGRESS state, the task definition name is displayed in the console and returned in the API. The task definition name is retained by Amazon ECS and the revision is incremented the next time you create a task definition with that name.
  
  This is a convenience which creates an instance of the DeleteTaskDefinitionsRequest.Builder avoiding the need to create one manually via DeleteTaskDefinitionsRequest.builder()
  
  Parameters:
  
  deleteTaskDefinitionsRequest - A Consumer that will call methods on DeleteTaskDefinitionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteTaskDefinitions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTaskSet
  default DeleteTaskSetResponse deleteTaskSet(DeleteTaskSetRequest deleteTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Deletes a specified task set within a service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  deleteTaskSetRequest -
  
  Returns:
  
  Result of the DeleteTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTaskSet
  default DeleteTaskSetResponse deleteTaskSet(Consumer<DeleteTaskSetRequest.Builder> deleteTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Deletes a specified task set within a service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS deployment types in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the DeleteTaskSetRequest.Builder avoiding the need to create one manually via DeleteTaskSetRequest.builder()
  
  Parameters:
  
  deleteTaskSetRequest - A Consumer that will call methods on DeleteTaskSetRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deregisterContainerInstance
  default DeregisterContainerInstanceResponse deregisterContainerInstance(DeregisterContainerInstanceRequest deregisterContainerInstanceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.
  
  If you intend to use the container instance for some other purpose after deregistration, we recommend that you stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks from consuming resources.
  
  Deregistering a container instance removes the instance from a cluster, but it doesn't terminate the EC2 instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.
  
  If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your cluster (stopped container instances or instances with disconnected agents aren't automatically deregistered when terminated).
  
  Parameters:
  
  deregisterContainerInstanceRequest -
  
  Returns:
  
  Result of the DeregisterContainerInstance operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deregisterContainerInstance
  default DeregisterContainerInstanceResponse deregisterContainerInstance(Consumer<DeregisterContainerInstanceRequest.Builder> deregisterContainerInstanceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.
  
  If you intend to use the container instance for some other purpose after deregistration, we recommend that you stop all of the tasks running on the container instance before deregistration. That prevents any orphaned tasks from consuming resources.
  
  Deregistering a container instance removes the instance from a cluster, but it doesn't terminate the EC2 instance. If you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.
  
  If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your cluster (stopped container instances or instances with disconnected agents aren't automatically deregistered when terminated).
  
  This is a convenience which creates an instance of the DeregisterContainerInstanceRequest.Builder avoiding the need to create one manually via DeregisterContainerInstanceRequest.builder()
  
  Parameters:
  
  deregisterContainerInstanceRequest - A Consumer that will call methods on DeregisterContainerInstanceRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeregisterContainerInstance operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deregisterTaskDefinition
  default DeregisterTaskDefinitionResponse deregisterTaskDefinition(DeregisterTaskDefinitionRequest deregisterTaskDefinitionRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is marked as INACTIVE. Existing tasks and services that reference an INACTIVE task definition continue to run without disruption. Existing services that reference an INACTIVE task definition can still scale up or down by modifying the service's desired count. If you want to delete a task definition revision, you must first deregister the task definition revision.
  
  You can't use an INACTIVE task definition to run new tasks or create new services, and you can't update an existing service to reference an INACTIVE task definition. However, there may be up to a 10-minute window following deregistration where these restrictions have not yet taken effect.
  
  At this time, INACTIVE task definitions remain discoverable in your account indefinitely. However, this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE task definitions persisting beyond the lifecycle of any associated tasks and services.
  
  You must deregister a task definition revision before you delete it. For more information, see DeleteTaskDefinitions.
  
  Parameters:
  
  deregisterTaskDefinitionRequest -
  
  Returns:
  
  Result of the DeregisterTaskDefinition operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deregisterTaskDefinition
  default DeregisterTaskDefinitionResponse deregisterTaskDefinition(Consumer<DeregisterTaskDefinitionRequest.Builder> deregisterTaskDefinitionRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is marked as INACTIVE. Existing tasks and services that reference an INACTIVE task definition continue to run without disruption. Existing services that reference an INACTIVE task definition can still scale up or down by modifying the service's desired count. If you want to delete a task definition revision, you must first deregister the task definition revision.
  
  You can't use an INACTIVE task definition to run new tasks or create new services, and you can't update an existing service to reference an INACTIVE task definition. However, there may be up to a 10-minute window following deregistration where these restrictions have not yet taken effect.
  
  At this time, INACTIVE task definitions remain discoverable in your account indefinitely. However, this behavior is subject to change in the future. We don't recommend that you rely on INACTIVE task definitions persisting beyond the lifecycle of any associated tasks and services.
  
  You must deregister a task definition revision before you delete it. For more information, see DeleteTaskDefinitions.
  
  This is a convenience which creates an instance of the DeregisterTaskDefinitionRequest.Builder avoiding the need to create one manually via DeregisterTaskDefinitionRequest.builder()
  
  Parameters:
  
  deregisterTaskDefinitionRequest - A Consumer that will call methods on DeregisterTaskDefinitionRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeregisterTaskDefinition operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeCapacityProviders
  default DescribeCapacityProvidersResponse describeCapacityProviders(DescribeCapacityProvidersRequest describeCapacityProvidersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Describes one or more of your capacity providers.
  
  Parameters:
  
  describeCapacityProvidersRequest -
  
  Returns:
  
  Result of the DescribeCapacityProviders operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeCapacityProviders
  default DescribeCapacityProvidersResponse describeCapacityProviders(Consumer<DescribeCapacityProvidersRequest.Builder> describeCapacityProvidersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Describes one or more of your capacity providers.
  
  This is a convenience which creates an instance of the DescribeCapacityProvidersRequest.Builder avoiding the need to create one manually via DescribeCapacityProvidersRequest.builder()
  
  Parameters:
  
  describeCapacityProvidersRequest - A Consumer that will call methods on DescribeCapacityProvidersRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeCapacityProviders operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeClusters
  default DescribeClustersResponse describeClusters(DescribeClustersRequest describeClustersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Describes one or more of your clusters.
  
  Parameters:
  
  describeClustersRequest -
  
  Returns:
  
  Result of the DescribeClusters operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeClusters
  default DescribeClustersResponse describeClusters(Consumer<DescribeClustersRequest.Builder> describeClustersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Describes one or more of your clusters.
  
  This is a convenience which creates an instance of the DescribeClustersRequest.Builder avoiding the need to create one manually via DescribeClustersRequest.builder()
  
  Parameters:
  
  describeClustersRequest - A Consumer that will call methods on DescribeClustersRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeClusters operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeClusters
  default DescribeClustersResponse describeClusters() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Describes one or more of your clusters.
  
  Returns:
  
  Result of the DescribeClusters operation returned by the service.
  
  See Also:
  
  describeClusters(DescribeClustersRequest)
  
  AWS API Documentation
- describeContainerInstances
  default DescribeContainerInstancesResponse describeContainerInstances(DescribeContainerInstancesRequest describeContainerInstancesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Describes one or more container instances. Returns metadata about each container instance requested.
  
  Parameters:
  
  describeContainerInstancesRequest -
  
  Returns:
  
  Result of the DescribeContainerInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeContainerInstances
  default DescribeContainerInstancesResponse describeContainerInstances(Consumer<DescribeContainerInstancesRequest.Builder> describeContainerInstancesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Describes one or more container instances. Returns metadata about each container instance requested.
  
  This is a convenience which creates an instance of the DescribeContainerInstancesRequest.Builder avoiding the need to create one manually via DescribeContainerInstancesRequest.builder()
  
  Parameters:
  
  describeContainerInstancesRequest - A Consumer that will call methods on DescribeContainerInstancesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeContainerInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeServices
  default DescribeServicesResponse describeServices(DescribeServicesRequest describeServicesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Describes the specified services running in your cluster.
  
  Parameters:
  
  describeServicesRequest -
  
  Returns:
  
  Result of the DescribeServices operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeServices
  default DescribeServicesResponse describeServices(Consumer<DescribeServicesRequest.Builder> describeServicesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Describes the specified services running in your cluster.
  
  This is a convenience which creates an instance of the DescribeServicesRequest.Builder avoiding the need to create one manually via DescribeServicesRequest.builder()
  
  Parameters:
  
  describeServicesRequest - A Consumer that will call methods on DescribeServicesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeServices operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTaskDefinition
  default DescribeTaskDefinitionResponse describeTaskDefinition(DescribeTaskDefinitionRequest describeTaskDefinitionRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Describes a task definition. You can specify a family and revision to find information about a specific task definition, or you can simply specify the family to find the latest ACTIVE revision in that family.
  
  You can only describe INACTIVE task definitions while an active task or service references them.
  
  Parameters:
  
  describeTaskDefinitionRequest -
  
  Returns:
  
  Result of the DescribeTaskDefinition operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTaskDefinition
  default DescribeTaskDefinitionResponse describeTaskDefinition(Consumer<DescribeTaskDefinitionRequest.Builder> describeTaskDefinitionRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Describes a task definition. You can specify a family and revision to find information about a specific task definition, or you can simply specify the family to find the latest ACTIVE revision in that family.
  
  You can only describe INACTIVE task definitions while an active task or service references them.
  
  This is a convenience which creates an instance of the DescribeTaskDefinitionRequest.Builder avoiding the need to create one manually via DescribeTaskDefinitionRequest.builder()
  
  Parameters:
  
  describeTaskDefinitionRequest - A Consumer that will call methods on DescribeTaskDefinitionRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeTaskDefinition operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTaskSets
  default DescribeTaskSetsResponse describeTaskSets(DescribeTaskSetsRequest describeTaskSetsRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, AwsServiceException, SdkClientException, EcsException
  
  Describes the task sets in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  describeTaskSetsRequest -
  
  Returns:
  
  Result of the DescribeTaskSets operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTaskSets
  default DescribeTaskSetsResponse describeTaskSets(Consumer<DescribeTaskSetsRequest.Builder> describeTaskSetsRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, AwsServiceException, SdkClientException, EcsException
  
  Describes the task sets in the specified cluster and service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the DescribeTaskSetsRequest.Builder avoiding the need to create one manually via DescribeTaskSetsRequest.builder()
  
  Parameters:
  
  describeTaskSetsRequest - A Consumer that will call methods on DescribeTaskSetsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeTaskSets operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTasks
  default DescribeTasksResponse describeTasks(DescribeTasksRequest describeTasksRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Describes a specified task or tasks.
  
  Currently, stopped tasks appear in the returned results for at least one hour.
  
  If you have tasks with tags, and then delete the cluster, the tagged tasks are returned in the response. If you create a new cluster with the same name as the deleted cluster, the tagged tasks are not included in the response.
  
  Parameters:
  
  describeTasksRequest -
  
  Returns:
  
  Result of the DescribeTasks operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTasks
  default DescribeTasksResponse describeTasks(Consumer<DescribeTasksRequest.Builder> describeTasksRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Describes a specified task or tasks.
  
  Currently, stopped tasks appear in the returned results for at least one hour.
  
  If you have tasks with tags, and then delete the cluster, the tagged tasks are returned in the response. If you create a new cluster with the same name as the deleted cluster, the tagged tasks are not included in the response.
  
  This is a convenience which creates an instance of the DescribeTasksRequest.Builder avoiding the need to create one manually via DescribeTasksRequest.builder()
  
  Parameters:
  
  describeTasksRequest - A Consumer that will call methods on DescribeTasksRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeTasks operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- discoverPollEndpoint
  default DiscoverPollEndpointResponse discoverPollEndpoint(DiscoverPollEndpointRequest discoverPollEndpointRequest) throws ServerException, ClientException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Returns an endpoint for the Amazon ECS agent to poll for updates.
  
  Parameters:
  
  discoverPollEndpointRequest -
  
  Returns:
  
  Result of the DiscoverPollEndpoint operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- discoverPollEndpoint
  default DiscoverPollEndpointResponse discoverPollEndpoint(Consumer<DiscoverPollEndpointRequest.Builder> discoverPollEndpointRequest) throws ServerException, ClientException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Returns an endpoint for the Amazon ECS agent to poll for updates.
  
  This is a convenience which creates an instance of the DiscoverPollEndpointRequest.Builder avoiding the need to create one manually via DiscoverPollEndpointRequest.builder()
  
  Parameters:
  
  discoverPollEndpointRequest - A Consumer that will call methods on DiscoverPollEndpointRequest.Builder to create a request.
  
  Returns:
  
  Result of the DiscoverPollEndpoint operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- executeCommand
  default ExecuteCommandResponse executeCommand(ExecuteCommandRequest executeCommandRequest) throws ServerException, ClientException, InvalidParameterException, AccessDeniedException, ClusterNotFoundException, TargetNotConnectedException, AwsServiceException, SdkClientException, EcsException
  
  Runs a command remotely on a container within a task.
  
  If you use a condition key in your IAM policy to refine the conditions for the policy statement, for example limit the actions to a specific cluster, you receive an AccessDeniedException when there is a mismatch between the condition key value and the corresponding parameter value.
  
  For information about required permissions and considerations, see Using Amazon ECS Exec for debugging in the Amazon ECS Developer Guide.
  
  Parameters:
  
  executeCommandRequest -
  
  Returns:
  
  Result of the ExecuteCommand operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- executeCommand
  default ExecuteCommandResponse executeCommand(Consumer<ExecuteCommandRequest.Builder> executeCommandRequest) throws ServerException, ClientException, InvalidParameterException, AccessDeniedException, ClusterNotFoundException, TargetNotConnectedException, AwsServiceException, SdkClientException, EcsException
  
  Runs a command remotely on a container within a task.
  
  If you use a condition key in your IAM policy to refine the conditions for the policy statement, for example limit the actions to a specific cluster, you receive an AccessDeniedException when there is a mismatch between the condition key value and the corresponding parameter value.
  
  For information about required permissions and considerations, see Using Amazon ECS Exec for debugging in the Amazon ECS Developer Guide.
  
  This is a convenience which creates an instance of the ExecuteCommandRequest.Builder avoiding the need to create one manually via ExecuteCommandRequest.builder()
  
  Parameters:
  
  executeCommandRequest - A Consumer that will call methods on ExecuteCommandRequest.Builder to create a request.
  
  Returns:
  
  Result of the ExecuteCommand operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getTaskProtection
  default GetTaskProtectionResponse getTaskProtection(GetTaskProtectionRequest getTaskProtectionRequest) throws AccessDeniedException, ClientException, ClusterNotFoundException, InvalidParameterException, ResourceNotFoundException, ServerException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Retrieves the protection status of tasks in an Amazon ECS service.
  
  Parameters:
  
  getTaskProtectionRequest -
  
  Returns:
  
  Result of the GetTaskProtection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getTaskProtection
  default GetTaskProtectionResponse getTaskProtection(Consumer<GetTaskProtectionRequest.Builder> getTaskProtectionRequest) throws AccessDeniedException, ClientException, ClusterNotFoundException, InvalidParameterException, ResourceNotFoundException, ServerException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Retrieves the protection status of tasks in an Amazon ECS service.
  
  This is a convenience which creates an instance of the GetTaskProtectionRequest.Builder avoiding the need to create one manually via GetTaskProtectionRequest.builder()
  
  Parameters:
  
  getTaskProtectionRequest - A Consumer that will call methods on GetTaskProtectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetTaskProtection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAccountSettings
  default ListAccountSettingsResponse listAccountSettings(ListAccountSettingsRequest listAccountSettingsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Lists the account settings for a specified principal.
  
  Parameters:
  
  listAccountSettingsRequest -
  
  Returns:
  
  Result of the ListAccountSettings operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAccountSettings
  default ListAccountSettingsResponse listAccountSettings(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Lists the account settings for a specified principal.
  
  This is a convenience which creates an instance of the ListAccountSettingsRequest.Builder avoiding the need to create one manually via ListAccountSettingsRequest.builder()
  
  Parameters:
  
  listAccountSettingsRequest - A Consumer that will call methods on ListAccountSettingsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListAccountSettings operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAccountSettings
  default ListAccountSettingsResponse listAccountSettings() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Lists the account settings for a specified principal.
  
  Returns:
  
  Result of the ListAccountSettings operation returned by the service.
  
  See Also:
  
  listAccountSettings(ListAccountSettingsRequest)
  
  AWS API Documentation
- listAccountSettingsPaginator
  default ListAccountSettingsIterable listAccountSettingsPaginator() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client .listAccountSettingsPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  listAccountSettingsPaginator(ListAccountSettingsRequest)
  
  AWS API Documentation
- listAccountSettingsPaginator
  default ListAccountSettingsIterable listAccountSettingsPaginator(ListAccountSettingsRequest listAccountSettingsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client .listAccountSettingsPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.
  
  Parameters:
  
  listAccountSettingsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listAccountSettingsPaginator
  default ListAccountSettingsIterable listAccountSettingsPaginator(Consumer<ListAccountSettingsRequest.Builder> listAccountSettingsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client .listAccountSettingsPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListAccountSettingsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListAccountSettingsIterable responses = client.listAccountSettingsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listAccountSettings(software.amazon.awssdk.services.ecs.model.ListAccountSettingsRequest) operation.
  
  This is a convenience which creates an instance of the ListAccountSettingsRequest.Builder avoiding the need to create one manually via ListAccountSettingsRequest.builder()
  
  Parameters:
  
  listAccountSettingsRequest - A Consumer that will call methods on ListAccountSettingsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listAttributes
  default ListAttributesResponse listAttributes(ListAttributesRequest listAttributesRequest) throws ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute on each resource. You can filter the list of results to a single attribute name to only return results that have that name. You can also filter the results by attribute name and value. You can do this, for example, to see which container instances in a cluster are running a Linux AMI (ecs.os-type=linux).
  
  Parameters:
  
  listAttributesRequest -
  
  Returns:
  
  Result of the ListAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAttributes
  default ListAttributesResponse listAttributes(Consumer<ListAttributesRequest.Builder> listAttributesRequest) throws ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute on each resource. You can filter the list of results to a single attribute name to only return results that have that name. You can also filter the results by attribute name and value. You can do this, for example, to see which container instances in a cluster are running a Linux AMI (ecs.os-type=linux).
  
  This is a convenience which creates an instance of the ListAttributesRequest.Builder avoiding the need to create one manually via ListAttributesRequest.builder()
  
  Parameters:
  
  listAttributesRequest - A Consumer that will call methods on ListAttributesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listAttributesPaginator
  default ListAttributesIterable listAttributesPaginator(ListAttributesRequest listAttributesRequest) throws ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListAttributesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation.
  
  Parameters:
  
  listAttributesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listAttributesPaginator
  default ListAttributesIterable listAttributesPaginator(Consumer<ListAttributesRequest.Builder> listAttributesRequest) throws ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListAttributesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListAttributesIterable responses = client.listAttributesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listAttributes(software.amazon.awssdk.services.ecs.model.ListAttributesRequest) operation.
  
  This is a convenience which creates an instance of the ListAttributesRequest.Builder avoiding the need to create one manually via ListAttributesRequest.builder()
  
  Parameters:
  
  listAttributesRequest - A Consumer that will call methods on ListAttributesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listClusters
  default ListClustersResponse listClusters(ListClustersRequest listClustersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of existing clusters.
  
  Parameters:
  
  listClustersRequest -
  
  Returns:
  
  Result of the ListClusters operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listClusters
  default ListClustersResponse listClusters(Consumer<ListClustersRequest.Builder> listClustersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of existing clusters.
  
  This is a convenience which creates an instance of the ListClustersRequest.Builder avoiding the need to create one manually via ListClustersRequest.builder()
  
  Parameters:
  
  listClustersRequest - A Consumer that will call methods on ListClustersRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListClusters operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listClusters
  default ListClustersResponse listClusters() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of existing clusters.
  
  Returns:
  
  Result of the ListClusters operation returned by the service.
  
  See Also:
  
  listClusters(ListClustersRequest)
  
  AWS API Documentation
- listClustersPaginator
  default ListClustersIterable listClustersPaginator() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListClustersResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  listClustersPaginator(ListClustersRequest)
  
  AWS API Documentation
- listClustersPaginator
  default ListClustersIterable listClustersPaginator(ListClustersRequest listClustersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListClustersResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.
  
  Parameters:
  
  listClustersRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listClustersPaginator
  default ListClustersIterable listClustersPaginator(Consumer<ListClustersRequest.Builder> listClustersRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListClustersResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListClustersIterable responses = client.listClustersPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listClusters(software.amazon.awssdk.services.ecs.model.ListClustersRequest) operation.
  
  This is a convenience which creates an instance of the ListClustersRequest.Builder avoiding the need to create one manually via ListClustersRequest.builder()
  
  Parameters:
  
  listClustersRequest - A Consumer that will call methods on ListClustersRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listContainerInstances
  default ListContainerInstancesResponse listContainerInstances(ListContainerInstancesRequest listContainerInstancesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of container instances in a specified cluster. You can filter the results of a ListContainerInstances operation with cluster query language statements inside the filter parameter. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  listContainerInstancesRequest -
  
  Returns:
  
  Result of the ListContainerInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listContainerInstances
  default ListContainerInstancesResponse listContainerInstances(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of container instances in a specified cluster. You can filter the results of a ListContainerInstances operation with cluster query language statements inside the filter parameter. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the ListContainerInstancesRequest.Builder avoiding the need to create one manually via ListContainerInstancesRequest.builder()
  
  Parameters:
  
  listContainerInstancesRequest - A Consumer that will call methods on ListContainerInstancesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListContainerInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listContainerInstances
  default ListContainerInstancesResponse listContainerInstances() throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of container instances in a specified cluster. You can filter the results of a ListContainerInstances operation with cluster query language statements inside the filter parameter. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
  
  Returns:
  
  Result of the ListContainerInstances operation returned by the service.
  
  See Also:
  
  listContainerInstances(ListContainerInstancesRequest)
  
  AWS API Documentation
- listContainerInstancesPaginator
  default ListContainerInstancesIterable listContainerInstancesPaginator() throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client .listContainerInstancesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  listContainerInstancesPaginator(ListContainerInstancesRequest)
  
  AWS API Documentation
- listContainerInstancesPaginator
  default ListContainerInstancesIterable listContainerInstancesPaginator(ListContainerInstancesRequest listContainerInstancesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client .listContainerInstancesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation.
  
  Parameters:
  
  listContainerInstancesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listContainerInstancesPaginator
  default ListContainerInstancesIterable listContainerInstancesPaginator(Consumer<ListContainerInstancesRequest.Builder> listContainerInstancesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client .listContainerInstancesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListContainerInstancesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListContainerInstancesIterable responses = client.listContainerInstancesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listContainerInstances(software.amazon.awssdk.services.ecs.model.ListContainerInstancesRequest) operation.
  
  This is a convenience which creates an instance of the ListContainerInstancesRequest.Builder avoiding the need to create one manually via ListContainerInstancesRequest.builder()
  
  Parameters:
  
  listContainerInstancesRequest - A Consumer that will call methods on ListContainerInstancesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listServices
  default ListServicesResponse listServices(ListServicesRequest listServicesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
  
  Parameters:
  
  listServicesRequest -
  
  Returns:
  
  Result of the ListServices operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listServices
  default ListServicesResponse listServices(Consumer<ListServicesRequest.Builder> listServicesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
  
  This is a convenience which creates an instance of the ListServicesRequest.Builder avoiding the need to create one manually via ListServicesRequest.builder()
  
  Parameters:
  
  listServicesRequest - A Consumer that will call methods on ListServicesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListServices operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listServices
  default ListServicesResponse listServices() throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of services. You can filter the results by cluster, launch type, and scheduling strategy.
  
  Returns:
  
  Result of the ListServices operation returned by the service.
  
  See Also:
  
  listServices(ListServicesRequest)
  
  AWS API Documentation
- listServicesPaginator
  default ListServicesIterable listServicesPaginator() throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListServicesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  listServicesPaginator(ListServicesRequest)
  
  AWS API Documentation
- listServicesPaginator
  default ListServicesIterable listServicesPaginator(ListServicesRequest listServicesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListServicesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.
  
  Parameters:
  
  listServicesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listServicesPaginator
  default ListServicesIterable listServicesPaginator(Consumer<ListServicesRequest.Builder> listServicesRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListServicesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListServicesIterable responses = client.listServicesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listServices(software.amazon.awssdk.services.ecs.model.ListServicesRequest) operation.
  
  This is a convenience which creates an instance of the ListServicesRequest.Builder avoiding the need to create one manually via ListServicesRequest.builder()
  
  Parameters:
  
  listServicesRequest - A Consumer that will call methods on ListServicesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listServicesByNamespace
  default ListServicesByNamespaceResponse listServicesByNamespace(ListServicesByNamespaceRequest listServicesByNamespaceRequest) throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This operation lists all of the services that are associated with a Cloud Map namespace. This list might include services in different clusters. In contrast, ListServices can only list services in one cluster at a time. If you need to filter the list of services in a single cluster by various parameters, use ListServices. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  listServicesByNamespaceRequest -
  
  Returns:
  
  Result of the ListServicesByNamespace operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listServicesByNamespace
  default ListServicesByNamespaceResponse listServicesByNamespace(Consumer<ListServicesByNamespaceRequest.Builder> listServicesByNamespaceRequest) throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This operation lists all of the services that are associated with a Cloud Map namespace. This list might include services in different clusters. In contrast, ListServices can only list services in one cluster at a time. If you need to filter the list of services in a single cluster by various parameters, use ListServices. For more information, see Service Connect in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the ListServicesByNamespaceRequest.Builder avoiding the need to create one manually via ListServicesByNamespaceRequest.builder()
  
  Parameters:
  
  listServicesByNamespaceRequest - A Consumer that will call methods on ListServicesByNamespaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListServicesByNamespace operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listServicesByNamespacePaginator
  default ListServicesByNamespaceIterable listServicesByNamespacePaginator(ListServicesByNamespaceRequest listServicesByNamespaceRequest) throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client .listServicesByNamespacePaginator(request); for (software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest) operation.
  
  Parameters:
  
  listServicesByNamespaceRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listServicesByNamespacePaginator
  default ListServicesByNamespaceIterable listServicesByNamespacePaginator(Consumer<ListServicesByNamespaceRequest.Builder> listServicesByNamespaceRequest) throws ServerException, ClientException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client .listServicesByNamespacePaginator(request); for (software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListServicesByNamespaceIterable responses = client.listServicesByNamespacePaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listServicesByNamespace(software.amazon.awssdk.services.ecs.model.ListServicesByNamespaceRequest) operation.
  
  This is a convenience which creates an instance of the ListServicesByNamespaceRequest.Builder avoiding the need to create one manually via ListServicesByNamespaceRequest.builder()
  
  Parameters:
  
  listServicesByNamespaceRequest - A Consumer that will call methods on ListServicesByNamespaceRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTagsForResource
  default ListTagsForResourceResponse listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest) throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  List the tags for an Amazon ECS resource.
  
  Parameters:
  
  listTagsForResourceRequest -
  
  Returns:
  
  Result of the ListTagsForResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTagsForResource
  default ListTagsForResourceResponse listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest) throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  List the tags for an Amazon ECS resource.
  
  This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()
  
  Parameters:
  
  listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListTagsForResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitionFamilies
  default ListTaskDefinitionFamiliesResponse listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of task definition families that are registered to your account. This list includes task definition families that no longer have any ACTIVE task definition revisions.
  
  You can filter out task definition families that don't contain any ACTIVE task definition revisions by setting the status parameter to ACTIVE. You can also filter the results with the familyPrefix parameter.
  
  Parameters:
  
  listTaskDefinitionFamiliesRequest -
  
  Returns:
  
  Result of the ListTaskDefinitionFamilies operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitionFamilies
  default ListTaskDefinitionFamiliesResponse listTaskDefinitionFamilies(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of task definition families that are registered to your account. This list includes task definition families that no longer have any ACTIVE task definition revisions.
  
  You can filter out task definition families that don't contain any ACTIVE task definition revisions by setting the status parameter to ACTIVE. You can also filter the results with the familyPrefix parameter.
  
  This is a convenience which creates an instance of the ListTaskDefinitionFamiliesRequest.Builder avoiding the need to create one manually via ListTaskDefinitionFamiliesRequest.builder()
  
  Parameters:
  
  listTaskDefinitionFamiliesRequest - A Consumer that will call methods on ListTaskDefinitionFamiliesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListTaskDefinitionFamilies operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitionFamilies
  default ListTaskDefinitionFamiliesResponse listTaskDefinitionFamilies() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of task definition families that are registered to your account. This list includes task definition families that no longer have any ACTIVE task definition revisions.
  
  You can filter out task definition families that don't contain any ACTIVE task definition revisions by setting the status parameter to ACTIVE. You can also filter the results with the familyPrefix parameter.
  
  Returns:
  
  Result of the ListTaskDefinitionFamilies operation returned by the service.
  
  See Also:
  
  listTaskDefinitionFamilies(ListTaskDefinitionFamiliesRequest)
  
  AWS API Documentation
- listTaskDefinitionFamiliesPaginator
  default ListTaskDefinitionFamiliesIterable listTaskDefinitionFamiliesPaginator() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client .listTaskDefinitionFamiliesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest)
  
  AWS API Documentation
- listTaskDefinitionFamiliesPaginator
  default ListTaskDefinitionFamiliesIterable listTaskDefinitionFamiliesPaginator(ListTaskDefinitionFamiliesRequest listTaskDefinitionFamiliesRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client .listTaskDefinitionFamiliesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation.
  
  Parameters:
  
  listTaskDefinitionFamiliesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitionFamiliesPaginator
  default ListTaskDefinitionFamiliesIterable listTaskDefinitionFamiliesPaginator(Consumer<ListTaskDefinitionFamiliesRequest.Builder> listTaskDefinitionFamiliesRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client .listTaskDefinitionFamiliesPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionFamiliesIterable responses = client.listTaskDefinitionFamiliesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTaskDefinitionFamilies(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionFamiliesRequest) operation.
  
  This is a convenience which creates an instance of the ListTaskDefinitionFamiliesRequest.Builder avoiding the need to create one manually via ListTaskDefinitionFamiliesRequest.builder()
  
  Parameters:
  
  listTaskDefinitionFamiliesRequest - A Consumer that will call methods on ListTaskDefinitionFamiliesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitions
  default ListTaskDefinitionsResponse listTaskDefinitions(ListTaskDefinitionsRequest listTaskDefinitionsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of task definitions that are registered to your account. You can filter the results by family name with the familyPrefix parameter or by status with the status parameter.
  
  Parameters:
  
  listTaskDefinitionsRequest -
  
  Returns:
  
  Result of the ListTaskDefinitions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitions
  default ListTaskDefinitionsResponse listTaskDefinitions(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of task definitions that are registered to your account. You can filter the results by family name with the familyPrefix parameter or by status with the status parameter.
  
  This is a convenience which creates an instance of the ListTaskDefinitionsRequest.Builder avoiding the need to create one manually via ListTaskDefinitionsRequest.builder()
  
  Parameters:
  
  listTaskDefinitionsRequest - A Consumer that will call methods on ListTaskDefinitionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListTaskDefinitions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitions
  default ListTaskDefinitionsResponse listTaskDefinitions() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of task definitions that are registered to your account. You can filter the results by family name with the familyPrefix parameter or by status with the status parameter.
  
  Returns:
  
  Result of the ListTaskDefinitions operation returned by the service.
  
  See Also:
  
  listTaskDefinitions(ListTaskDefinitionsRequest)
  
  AWS API Documentation
- listTaskDefinitionsPaginator
  default ListTaskDefinitionsIterable listTaskDefinitionsPaginator() throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client .listTaskDefinitionsPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  listTaskDefinitionsPaginator(ListTaskDefinitionsRequest)
  
  AWS API Documentation
- listTaskDefinitionsPaginator
  default ListTaskDefinitionsIterable listTaskDefinitionsPaginator(ListTaskDefinitionsRequest listTaskDefinitionsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client .listTaskDefinitionsPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.
  
  Parameters:
  
  listTaskDefinitionsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTaskDefinitionsPaginator
  default ListTaskDefinitionsIterable listTaskDefinitionsPaginator(Consumer<ListTaskDefinitionsRequest.Builder> listTaskDefinitionsRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client .listTaskDefinitionsPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTaskDefinitionsIterable responses = client.listTaskDefinitionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTaskDefinitions(software.amazon.awssdk.services.ecs.model.ListTaskDefinitionsRequest) operation.
  
  This is a convenience which creates an instance of the ListTaskDefinitionsRequest.Builder avoiding the need to create one manually via ListTaskDefinitionsRequest.builder()
  
  Parameters:
  
  listTaskDefinitionsRequest - A Consumer that will call methods on ListTaskDefinitionsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTasks
  default ListTasksResponse listTasks(ListTasksRequest listTasksRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of tasks. You can filter the results by cluster, task definition family, container instance, launch type, what IAM principal started the task, or by the desired status of the task.
  
  Recently stopped tasks might appear in the returned results.
  
  Parameters:
  
  listTasksRequest -
  
  Returns:
  
  Result of the ListTasks operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTasks
  default ListTasksResponse listTasks(Consumer<ListTasksRequest.Builder> listTasksRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of tasks. You can filter the results by cluster, task definition family, container instance, launch type, what IAM principal started the task, or by the desired status of the task.
  
  Recently stopped tasks might appear in the returned results.
  
  This is a convenience which creates an instance of the ListTasksRequest.Builder avoiding the need to create one manually via ListTasksRequest.builder()
  
  Parameters:
  
  listTasksRequest - A Consumer that will call methods on ListTasksRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListTasks operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listTasks
  default ListTasksResponse listTasks() throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Returns a list of tasks. You can filter the results by cluster, task definition family, container instance, launch type, what IAM principal started the task, or by the desired status of the task.
  
  Recently stopped tasks might appear in the returned results.
  
  Returns:
  
  Result of the ListTasks operation returned by the service.
  
  See Also:
  
  listTasks(ListTasksRequest)
  
  AWS API Documentation
- listTasksPaginator
  default ListTasksIterable listTasksPaginator() throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTasksResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  listTasksPaginator(ListTasksRequest)
  
  AWS API Documentation
- listTasksPaginator
  default ListTasksIterable listTasksPaginator(ListTasksRequest listTasksRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTasksResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
  
  Parameters:
  
  listTasksRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- listTasksPaginator
  default ListTasksIterable listTasksPaginator(Consumer<ListTasksRequest.Builder> listTasksRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  This is a variant of listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); for (software.amazon.awssdk.services.ecs.model.ListTasksResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.ecs.paginators.ListTasksIterable responses = client.listTasksPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of maxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the listTasks(software.amazon.awssdk.services.ecs.model.ListTasksRequest) operation.
  
  This is a convenience which creates an instance of the ListTasksRequest.Builder avoiding the need to create one manually via ListTasksRequest.builder()
  
  Parameters:
  
  listTasksRequest - A Consumer that will call methods on ListTasksRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- putAccountSetting
  default PutAccountSettingResponse putAccountSetting(PutAccountSettingRequest putAccountSettingRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies an account setting. Account settings are set on a per-Region basis.
  
  If you change the root user account setting, the default settings are reset for users and roles that do not have specified individual account settings. For more information, see Account Settings in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  putAccountSettingRequest -
  
  Returns:
  
  Result of the PutAccountSetting operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putAccountSetting
  default PutAccountSettingResponse putAccountSetting(Consumer<PutAccountSettingRequest.Builder> putAccountSettingRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies an account setting. Account settings are set on a per-Region basis.
  
  If you change the root user account setting, the default settings are reset for users and roles that do not have specified individual account settings. For more information, see Account Settings in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the PutAccountSettingRequest.Builder avoiding the need to create one manually via PutAccountSettingRequest.builder()
  
  Parameters:
  
  putAccountSettingRequest - A Consumer that will call methods on PutAccountSettingRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutAccountSetting operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putAccountSettingDefault
  default PutAccountSettingDefaultResponse putAccountSettingDefault(PutAccountSettingDefaultRequest putAccountSettingDefaultRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies an account setting for all users on an account for whom no individual account setting has been specified. Account settings are set on a per-Region basis.
  
  Parameters:
  
  putAccountSettingDefaultRequest -
  
  Returns:
  
  Result of the PutAccountSettingDefault operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putAccountSettingDefault
  default PutAccountSettingDefaultResponse putAccountSettingDefault(Consumer<PutAccountSettingDefaultRequest.Builder> putAccountSettingDefaultRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies an account setting for all users on an account for whom no individual account setting has been specified. Account settings are set on a per-Region basis.
  
  This is a convenience which creates an instance of the PutAccountSettingDefaultRequest.Builder avoiding the need to create one manually via PutAccountSettingDefaultRequest.builder()
  
  Parameters:
  
  putAccountSettingDefaultRequest - A Consumer that will call methods on PutAccountSettingDefaultRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutAccountSettingDefault operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putAttributes
  default PutAttributesResponse putAttributes(PutAttributesRequest putAttributesRequest) throws ClusterNotFoundException, TargetNotFoundException, AttributeLimitExceededException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Create or update an attribute on an Amazon ECS resource. If the attribute doesn't exist, it's created. If the attribute exists, its value is replaced with the specified value. To delete an attribute, use DeleteAttributes. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  putAttributesRequest -
  
  Returns:
  
  Result of the PutAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putAttributes
  default PutAttributesResponse putAttributes(Consumer<PutAttributesRequest.Builder> putAttributesRequest) throws ClusterNotFoundException, TargetNotFoundException, AttributeLimitExceededException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Create or update an attribute on an Amazon ECS resource. If the attribute doesn't exist, it's created. If the attribute exists, its value is replaced with the specified value. To delete an attribute, use DeleteAttributes. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the PutAttributesRequest.Builder avoiding the need to create one manually via PutAttributesRequest.builder()
  
  Parameters:
  
  putAttributesRequest - A Consumer that will call methods on PutAttributesRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putClusterCapacityProviders
  default PutClusterCapacityProvidersResponse putClusterCapacityProviders(PutClusterCapacityProvidersRequest putClusterCapacityProvidersRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ResourceInUseException, UpdateInProgressException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the available capacity providers and the default capacity provider strategy for a cluster.
  
  You must specify both the available capacity providers and a default capacity provider strategy for the cluster. If the specified cluster has existing capacity providers associated with it, you must specify all existing capacity providers in addition to any new ones you want to add. Any existing capacity providers that are associated with a cluster that are omitted from a PutClusterCapacityProviders API call will be disassociated with the cluster. You can only disassociate an existing capacity provider from a cluster if it's not being used by any existing tasks.
  
  When creating a service or running a task on a cluster, if no capacity provider or launch type is specified, then the cluster's default capacity provider strategy is used. We recommend that you define a default capacity provider strategy for your cluster. However, you must specify an empty array ([]) to bypass defining a default strategy.
  
  Parameters:
  
  putClusterCapacityProvidersRequest -
  
  Returns:
  
  Result of the PutClusterCapacityProviders operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putClusterCapacityProviders
  default PutClusterCapacityProvidersResponse putClusterCapacityProviders(Consumer<PutClusterCapacityProvidersRequest.Builder> putClusterCapacityProvidersRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ResourceInUseException, UpdateInProgressException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the available capacity providers and the default capacity provider strategy for a cluster.
  
  You must specify both the available capacity providers and a default capacity provider strategy for the cluster. If the specified cluster has existing capacity providers associated with it, you must specify all existing capacity providers in addition to any new ones you want to add. Any existing capacity providers that are associated with a cluster that are omitted from a PutClusterCapacityProviders API call will be disassociated with the cluster. You can only disassociate an existing capacity provider from a cluster if it's not being used by any existing tasks.
  
  When creating a service or running a task on a cluster, if no capacity provider or launch type is specified, then the cluster's default capacity provider strategy is used. We recommend that you define a default capacity provider strategy for your cluster. However, you must specify an empty array ([]) to bypass defining a default strategy.
  
  This is a convenience which creates an instance of the PutClusterCapacityProvidersRequest.Builder avoiding the need to create one manually via PutClusterCapacityProvidersRequest.builder()
  
  Parameters:
  
  putClusterCapacityProvidersRequest - A Consumer that will call methods on PutClusterCapacityProvidersRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutClusterCapacityProviders operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- registerContainerInstance
  default RegisterContainerInstanceResponse registerContainerInstance(RegisterContainerInstanceRequest registerContainerInstanceRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
  
  Parameters:
  
  registerContainerInstanceRequest -
  
  Returns:
  
  Result of the RegisterContainerInstance operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- registerContainerInstance
  default RegisterContainerInstanceResponse registerContainerInstance(Consumer<RegisterContainerInstanceRequest.Builder> registerContainerInstanceRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.
  
  This is a convenience which creates an instance of the RegisterContainerInstanceRequest.Builder avoiding the need to create one manually via RegisterContainerInstanceRequest.builder()
  
  Parameters:
  
  registerContainerInstanceRequest - A Consumer that will call methods on RegisterContainerInstanceRequest.Builder to create a request.
  
  Returns:
  
  Result of the RegisterContainerInstance operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- registerTaskDefinition
  default RegisterTaskDefinitionResponse registerTaskDefinition(RegisterTaskDefinitionRequest registerTaskDefinitionRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Registers a new task definition from the supplied family and containerDefinitions. Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide.
  
  You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide.
  
  You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. If you specify the awsvpc network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  registerTaskDefinitionRequest -
  
  Returns:
  
  Result of the RegisterTaskDefinition operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- registerTaskDefinition
  default RegisterTaskDefinitionResponse registerTaskDefinition(Consumer<RegisterTaskDefinitionRequest.Builder> registerTaskDefinitionRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Registers a new task definition from the supplied family and containerDefinitions. Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide.
  
  You can specify a role for your task with the taskRoleArn parameter. When you specify a role for a task, its containers can then use the latest versions of the CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide.
  
  You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. If you specify the awsvpc network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the RegisterTaskDefinitionRequest.Builder avoiding the need to create one manually via RegisterTaskDefinitionRequest.builder()
  
  Parameters:
  
  registerTaskDefinitionRequest - A Consumer that will call methods on RegisterTaskDefinitionRequest.Builder to create a request.
  
  Returns:
  
  Result of the RegisterTaskDefinition operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- runTask
  default RunTaskResponse runTask(RunTaskRequest runTaskRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, BlockedException, ConflictException, AwsServiceException, SdkClientException, EcsException
  
  Starts a new task using the specified task definition.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  Amazon Elastic Inference (EI) is no longer available to customers.
  
  You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
  
  Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.
  
  To manage eventual consistency, you can do the following:
  
  Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.
  
  Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.
  
  Parameters:
  
  runTaskRequest -
  
  Returns:
  
  Result of the RunTask operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- runTask
  default RunTaskResponse runTask(Consumer<RunTaskRequest.Builder> runTaskRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, BlockedException, ConflictException, AwsServiceException, SdkClientException, EcsException
  
  Starts a new task using the specified task definition.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  Amazon Elastic Inference (EI) is no longer available to customers.
  
  You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
  
  Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.
  
  To manage eventual consistency, you can do the following:
  
  Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.
  
  Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.
  
  This is a convenience which creates an instance of the RunTaskRequest.Builder avoiding the need to create one manually via RunTaskRequest.builder()
  
  Parameters:
  
  runTaskRequest - A Consumer that will call methods on RunTaskRequest.Builder to create a request.
  
  Returns:
  
  Result of the RunTask operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startTask
  default StartTaskResponse startTask(StartTaskRequest startTaskRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Starts a new task from the specified task definition on the specified container instance or instances.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  Amazon Elastic Inference (EI) is no longer available to customers.
  
  Alternatively, you can useRunTask to place tasks for you. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  startTaskRequest -
  
  Returns:
  
  Result of the StartTask operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startTask
  default StartTaskResponse startTask(Consumer<StartTaskRequest.Builder> startTaskRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Starts a new task from the specified task definition on the specified container instance or instances.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  Amazon Elastic Inference (EI) is no longer available to customers.
  
  Alternatively, you can useRunTask to place tasks for you. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the StartTaskRequest.Builder avoiding the need to create one manually via StartTaskRequest.builder()
  
  Parameters:
  
  startTaskRequest - A Consumer that will call methods on StartTaskRequest.Builder to create a request.
  
  Returns:
  
  Result of the StartTask operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- stopTask
  default StopTaskResponse stopTask(StopTaskRequest stopTaskRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Stops a running task. Any tags associated with the task will be deleted.
  
  When you call StopTask on a task, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM value and a default 30-second timeout, after which the SIGKILL value is sent and the containers are forcibly stopped. If the container handles the SIGTERM value gracefully and exits within 30 seconds from receiving it, no SIGKILL value is sent.
  
  For Windows containers, POSIX signals do not work and runtime stops the container by sending a CTRL_SHUTDOWN_EVENT. For more information, see Unable to react to graceful shutdown of (Windows) container #25982 on GitHub.
  
  The default 30-second timeout can be configured on the Amazon ECS container agent with the ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  stopTaskRequest -
  
  Returns:
  
  Result of the StopTask operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- stopTask
  default StopTaskResponse stopTask(Consumer<StopTaskRequest.Builder> stopTaskRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Stops a running task. Any tags associated with the task will be deleted.
  
  When you call StopTask on a task, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM value and a default 30-second timeout, after which the SIGKILL value is sent and the containers are forcibly stopped. If the container handles the SIGTERM value gracefully and exits within 30 seconds from receiving it, no SIGKILL value is sent.
  
  For Windows containers, POSIX signals do not work and runtime stops the container by sending a CTRL_SHUTDOWN_EVENT. For more information, see Unable to react to graceful shutdown of (Windows) container #25982 on GitHub.
  
  The default 30-second timeout can be configured on the Amazon ECS container agent with the ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the StopTaskRequest.Builder avoiding the need to create one manually via StopTaskRequest.builder()
  
  Parameters:
  
  stopTaskRequest - A Consumer that will call methods on StopTaskRequest.Builder to create a request.
  
  Returns:
  
  Result of the StopTask operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- submitAttachmentStateChanges
  default SubmitAttachmentStateChangesResponse submitAttachmentStateChanges(SubmitAttachmentStateChangesRequest submitAttachmentStateChangesRequest) throws ServerException, ClientException, AccessDeniedException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Sent to acknowledge that an attachment changed states.
  
  Parameters:
  
  submitAttachmentStateChangesRequest -
  
  Returns:
  
  Result of the SubmitAttachmentStateChanges operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- submitAttachmentStateChanges
  default SubmitAttachmentStateChangesResponse submitAttachmentStateChanges(Consumer<SubmitAttachmentStateChangesRequest.Builder> submitAttachmentStateChangesRequest) throws ServerException, ClientException, AccessDeniedException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Sent to acknowledge that an attachment changed states.
  
  This is a convenience which creates an instance of the SubmitAttachmentStateChangesRequest.Builder avoiding the need to create one manually via SubmitAttachmentStateChangesRequest.builder()
  
  Parameters:
  
  submitAttachmentStateChangesRequest - A Consumer that will call methods on SubmitAttachmentStateChangesRequest.Builder to create a request.
  
  Returns:
  
  Result of the SubmitAttachmentStateChanges operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- submitContainerStateChange
  default SubmitContainerStateChangeResponse submitContainerStateChange(SubmitContainerStateChangeRequest submitContainerStateChangeRequest) throws ServerException, ClientException, AccessDeniedException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Sent to acknowledge that a container changed states.
  
  Parameters:
  
  submitContainerStateChangeRequest -
  
  Returns:
  
  Result of the SubmitContainerStateChange operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- submitContainerStateChange
  default SubmitContainerStateChangeResponse submitContainerStateChange(Consumer<SubmitContainerStateChangeRequest.Builder> submitContainerStateChangeRequest) throws ServerException, ClientException, AccessDeniedException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Sent to acknowledge that a container changed states.
  
  This is a convenience which creates an instance of the SubmitContainerStateChangeRequest.Builder avoiding the need to create one manually via SubmitContainerStateChangeRequest.builder()
  
  Parameters:
  
  submitContainerStateChangeRequest - A Consumer that will call methods on SubmitContainerStateChangeRequest.Builder to create a request.
  
  Returns:
  
  Result of the SubmitContainerStateChange operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- submitTaskStateChange
  default SubmitTaskStateChangeResponse submitTaskStateChange(SubmitTaskStateChangeRequest submitTaskStateChangeRequest) throws ServerException, ClientException, AccessDeniedException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Sent to acknowledge that a task changed states.
  
  Parameters:
  
  submitTaskStateChangeRequest -
  
  Returns:
  
  Result of the SubmitTaskStateChange operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- submitTaskStateChange
  default SubmitTaskStateChangeResponse submitTaskStateChange(Consumer<SubmitTaskStateChangeRequest.Builder> submitTaskStateChangeRequest) throws ServerException, ClientException, AccessDeniedException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.
  
  Sent to acknowledge that a task changed states.
  
  This is a convenience which creates an instance of the SubmitTaskStateChangeRequest.Builder avoiding the need to create one manually via SubmitTaskStateChangeRequest.builder()
  
  Parameters:
  
  submitTaskStateChangeRequest - A Consumer that will call methods on SubmitTaskStateChangeRequest.Builder to create a request.
  
  Returns:
  
  Result of the SubmitTaskStateChange operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- tagResource
  default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest) throws ServerException, ClientException, ClusterNotFoundException, ResourceNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Associates the specified tags to a resource with the specified resourceArn. If existing tags on a resource aren't specified in the request parameters, they aren't changed. When a resource is deleted, the tags that are associated with that resource are deleted as well.
  
  Parameters:
  
  tagResourceRequest -
  
  Returns:
  
  Result of the TagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- tagResource
  default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest) throws ServerException, ClientException, ClusterNotFoundException, ResourceNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Associates the specified tags to a resource with the specified resourceArn. If existing tags on a resource aren't specified in the request parameters, they aren't changed. When a resource is deleted, the tags that are associated with that resource are deleted as well.
  
  This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
  
  Parameters:
  
  tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the TagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- untagResource
  default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest) throws ServerException, ClientException, ClusterNotFoundException, ResourceNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deletes specified tags from a resource.
  
  Parameters:
  
  untagResourceRequest -
  
  Returns:
  
  Result of the UntagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- untagResource
  default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest) throws ServerException, ClientException, ClusterNotFoundException, ResourceNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Deletes specified tags from a resource.
  
  This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
  
  Parameters:
  
  untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the UntagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateCapacityProvider
  default UpdateCapacityProviderResponse updateCapacityProvider(UpdateCapacityProviderRequest updateCapacityProviderRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the parameters for a capacity provider.
  
  Parameters:
  
  updateCapacityProviderRequest -
  
  Returns:
  
  Result of the UpdateCapacityProvider operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateCapacityProvider
  default UpdateCapacityProviderResponse updateCapacityProvider(Consumer<UpdateCapacityProviderRequest.Builder> updateCapacityProviderRequest) throws ServerException, ClientException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the parameters for a capacity provider.
  
  This is a convenience which creates an instance of the UpdateCapacityProviderRequest.Builder avoiding the need to create one manually via UpdateCapacityProviderRequest.builder()
  
  Parameters:
  
  updateCapacityProviderRequest - A Consumer that will call methods on UpdateCapacityProviderRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateCapacityProvider operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateCluster
  default UpdateClusterResponse updateCluster(UpdateClusterRequest updateClusterRequest) throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Updates the cluster.
  
  Parameters:
  
  updateClusterRequest -
  
  Returns:
  
  Result of the UpdateCluster operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateCluster
  default UpdateClusterResponse updateCluster(Consumer<UpdateClusterRequest.Builder> updateClusterRequest) throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, NamespaceNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Updates the cluster.
  
  This is a convenience which creates an instance of the UpdateClusterRequest.Builder avoiding the need to create one manually via UpdateClusterRequest.builder()
  
  Parameters:
  
  updateClusterRequest - A Consumer that will call methods on UpdateClusterRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateCluster operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateClusterSettings
  default UpdateClusterSettingsResponse updateClusterSettings(UpdateClusterSettingsRequest updateClusterSettingsRequest) throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the settings to use for a cluster.
  
  Parameters:
  
  updateClusterSettingsRequest -
  
  Returns:
  
  Result of the UpdateClusterSettings operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateClusterSettings
  default UpdateClusterSettingsResponse updateClusterSettings(Consumer<UpdateClusterSettingsRequest.Builder> updateClusterSettingsRequest) throws ServerException, ClientException, ClusterNotFoundException, InvalidParameterException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the settings to use for a cluster.
  
  This is a convenience which creates an instance of the UpdateClusterSettingsRequest.Builder avoiding the need to create one manually via UpdateClusterSettingsRequest.builder()
  
  Parameters:
  
  updateClusterSettingsRequest - A Consumer that will call methods on UpdateClusterSettingsRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateClusterSettings operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateContainerAgent
  default UpdateContainerAgentResponse updateContainerAgent(UpdateContainerAgentRequest updateContainerAgentRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UpdateInProgressException, NoUpdateAvailableException, MissingVersionException, AwsServiceException, SdkClientException, EcsException
  
  Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent doesn't interrupt running tasks or services on the container instance. The process for updating the agent differs depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating system.
  
  The UpdateContainerAgent API isn't supported for container instances using the Amazon ECS-optimized Amazon Linux 2 (arm64) AMI. To update the container agent, you can update the ecs-init package. This updates the agent. For more information, see Updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer Guide.
  
  Agent updates with the UpdateContainerAgent API operation do not apply to Windows container instances. We recommend that you launch new container instances to update the agent version in your Windows clusters.
  
  The UpdateContainerAgent API requires an Amazon ECS-optimized AMI or Amazon Linux AMI with the ecs-init service installed and running. For help updating the Amazon ECS container agent on other operating systems, see Manually updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  updateContainerAgentRequest -
  
  Returns:
  
  Result of the UpdateContainerAgent operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateContainerAgent
  default UpdateContainerAgentResponse updateContainerAgent(Consumer<UpdateContainerAgentRequest.Builder> updateContainerAgentRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UpdateInProgressException, NoUpdateAvailableException, MissingVersionException, AwsServiceException, SdkClientException, EcsException
  
  Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent doesn't interrupt running tasks or services on the container instance. The process for updating the agent differs depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating system.
  
  The UpdateContainerAgent API isn't supported for container instances using the Amazon ECS-optimized Amazon Linux 2 (arm64) AMI. To update the container agent, you can update the ecs-init package. This updates the agent. For more information, see Updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer Guide.
  
  Agent updates with the UpdateContainerAgent API operation do not apply to Windows container instances. We recommend that you launch new container instances to update the agent version in your Windows clusters.
  
  The UpdateContainerAgent API requires an Amazon ECS-optimized AMI or Amazon Linux AMI with the ecs-init service installed and running. For help updating the Amazon ECS container agent on other operating systems, see Manually updating the Amazon ECS container agent in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the UpdateContainerAgentRequest.Builder avoiding the need to create one manually via UpdateContainerAgentRequest.builder()
  
  Parameters:
  
  updateContainerAgentRequest - A Consumer that will call methods on UpdateContainerAgentRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateContainerAgent operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateContainerInstancesState
  default UpdateContainerInstancesStateResponse updateContainerInstancesState(UpdateContainerInstancesStateRequest updateContainerInstancesStateRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the status of an Amazon ECS container instance.
  
  Once a container instance has reached an ACTIVE state, you can change the status of a container instance to DRAINING to manually remove an instance from a cluster, for example to perform system updates, update the Docker daemon, or scale down the cluster size.
  
  A container instance can't be changed to DRAINING until it has reached an ACTIVE status. If the instance is in any other status, an error will be received.
  
  When you set a container instance to DRAINING, Amazon ECS prevents new tasks from being scheduled for placement on the container instance and replacement service tasks are started on other container instances in the cluster if the resources are available. Service tasks on the container instance that are in the PENDING state are stopped immediately.
  
  Service tasks on the container instance that are in the RUNNING state are stopped and replaced according to the service's deployment configuration parameters, minimumHealthyPercent and maximumPercent. You can change the deployment configuration of your service using UpdateService.
  
  If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during task replacement. For example, desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for services that do not use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the load balancer.
  
  The maximumPercent parameter represents an upper limit on the number of running tasks during task replacement. You can use this to define the replacement batch size. For example, if desiredCount is four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained, provided that the cluster resources required to do this are available. If the maximum is 100%, then replacement tasks can't start until the draining tasks have stopped.
  
  Any PENDING or RUNNING tasks that do not belong to a service aren't affected. You must wait for them to finish or stop them manually.
  
  A container instance has completed draining when it has no more RUNNING tasks. You can verify this using ListTasks.
  
  When a container instance has been drained, you can set a container instance to ACTIVE status and once it has reached that status the Amazon ECS scheduler can begin scheduling tasks on the instance again.
  
  Parameters:
  
  updateContainerInstancesStateRequest -
  
  Returns:
  
  Result of the UpdateContainerInstancesState operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateContainerInstancesState
  default UpdateContainerInstancesStateResponse updateContainerInstancesState(Consumer<UpdateContainerInstancesStateRequest.Builder> updateContainerInstancesStateRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the status of an Amazon ECS container instance.
  
  Once a container instance has reached an ACTIVE state, you can change the status of a container instance to DRAINING to manually remove an instance from a cluster, for example to perform system updates, update the Docker daemon, or scale down the cluster size.
  
  A container instance can't be changed to DRAINING until it has reached an ACTIVE status. If the instance is in any other status, an error will be received.
  
  When you set a container instance to DRAINING, Amazon ECS prevents new tasks from being scheduled for placement on the container instance and replacement service tasks are started on other container instances in the cluster if the resources are available. Service tasks on the container instance that are in the PENDING state are stopped immediately.
  
  Service tasks on the container instance that are in the RUNNING state are stopped and replaced according to the service's deployment configuration parameters, minimumHealthyPercent and maximumPercent. You can change the deployment configuration of your service using UpdateService.
  
  If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during task replacement. For example, desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for services that do not use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the load balancer.
  
  The maximumPercent parameter represents an upper limit on the number of running tasks during task replacement. You can use this to define the replacement batch size. For example, if desiredCount is four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained, provided that the cluster resources required to do this are available. If the maximum is 100%, then replacement tasks can't start until the draining tasks have stopped.
  
  Any PENDING or RUNNING tasks that do not belong to a service aren't affected. You must wait for them to finish or stop them manually.
  
  A container instance has completed draining when it has no more RUNNING tasks. You can verify this using ListTasks.
  
  When a container instance has been drained, you can set a container instance to ACTIVE status and once it has reached that status the Amazon ECS scheduler can begin scheduling tasks on the instance again.
  
  This is a convenience which creates an instance of the UpdateContainerInstancesStateRequest.Builder avoiding the need to create one manually via UpdateContainerInstancesStateRequest.builder()
  
  Parameters:
  
  updateContainerInstancesStateRequest - A Consumer that will call methods on UpdateContainerInstancesStateRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateContainerInstancesState operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateService
  default UpdateServiceResponse updateService(UpdateServiceRequest updateServiceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, ServiceNotActiveException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, NamespaceNotFoundException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the parameters of a service.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  For services using the rolling update (ECS) you can update the desired count, deployment configuration, network configuration, load balancers, service registries, enable ECS managed tags option, propagate tags option, task placement constraints and strategies, and task definition. When you update any of these parameters, Amazon ECS starts new tasks with the new configuration.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or running a task, or when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide. You can update your volume configurations and trigger a new deployment. volumeConfigurations is only supported for REPLICA service and not DAEMON service. If you leave volumeConfigurations null, it doesn't trigger a new deployment. For more infomation on volumes, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  For services using the blue/green (CODE_DEPLOY) deployment controller, only the desired count, deployment configuration, health check grace period, task placement constraints and strategies, enable ECS managed tags option, and propagate tags can be updated using this API. If the network configuration, platform version, task definition, or load balancer need to be updated, create a new CodeDeploy deployment. For more information, see CreateDeployment in the CodeDeploy API Reference.
  
  For services using an external deployment controller, you can update only the desired count, task placement constraints and strategies, health check grace period, enable ECS managed tags option, and propagate tags option, using this API. If the launch type, load balancer, network configuration, platform version, or task definition need to be updated, create a new task set For more information, see CreateTaskSet.
  
  You can add to or subtract from the number of instantiations of a task definition in a service by specifying the cluster that the service is running in and a new desiredCount parameter.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or running a task, or when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  If you have updated the container image of your application, you can create a new task definition with that image and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent parameters (in the service's deployment configuration) to determine the deployment strategy.
  
  If your updated Docker image uses the same tag as what is in the existing task definition for your service (for example, my_image:latest), you don't need to create a new revision of your task definition. You can update the service using the forceNewDeployment option. The new tasks launched by the deployment pull the current image/tag combination from your repository when they start.
  
  You can also update the deployment configuration of a service. When a deployment is triggered by updating the task definition of a service, the service scheduler uses the deployment configuration parameters, minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
  
  If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the load balancer.
  
  The maximumPercent parameter represents an upper limit on the number of running tasks during a deployment. You can use it to define the deployment batch size. For example, if desiredCount is four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available).
  
  When UpdateService stops a task during a deployment, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM and a 30-second timeout. After this, SIGKILL is sent and the containers are forcibly stopped. If the container handles the SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
  
  When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic.
  
  Determine which of the container instances in your cluster can support your service's task definition. For example, they have the required CPU, memory, ports, and container instance attributes.
  
  By default, the service scheduler attempts to balance tasks across Availability Zones in this manner even though you can choose a different placement strategy.
  
  Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
  
  Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
  
  When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
  
  Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
  
  Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
  
  You must have a service-linked role when you update any of the following service properties:
  
  loadBalancers,
  
  serviceRegistries
  
  For more information about the role see the CreateService request parameter role .
  
  Parameters:
  
  updateServiceRequest -
  
  Returns:
  
  Result of the UpdateService operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateService
  default UpdateServiceResponse updateService(Consumer<UpdateServiceRequest.Builder> updateServiceRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, ServiceNotFoundException, ServiceNotActiveException, PlatformUnknownException, PlatformTaskDefinitionIncompatibilityException, AccessDeniedException, NamespaceNotFoundException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Modifies the parameters of a service.
  
  On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.
  
  For services using the rolling update (ECS) you can update the desired count, deployment configuration, network configuration, load balancers, service registries, enable ECS managed tags option, propagate tags option, task placement constraints and strategies, and task definition. When you update any of these parameters, Amazon ECS starts new tasks with the new configuration.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or running a task, or when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide. You can update your volume configurations and trigger a new deployment. volumeConfigurations is only supported for REPLICA service and not DAEMON service. If you leave volumeConfigurations null, it doesn't trigger a new deployment. For more infomation on volumes, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  For services using the blue/green (CODE_DEPLOY) deployment controller, only the desired count, deployment configuration, health check grace period, task placement constraints and strategies, enable ECS managed tags option, and propagate tags can be updated using this API. If the network configuration, platform version, task definition, or load balancer need to be updated, create a new CodeDeploy deployment. For more information, see CreateDeployment in the CodeDeploy API Reference.
  
  For services using an external deployment controller, you can update only the desired count, task placement constraints and strategies, health check grace period, enable ECS managed tags option, and propagate tags option, using this API. If the launch type, load balancer, network configuration, platform version, or task definition need to be updated, create a new task set For more information, see CreateTaskSet.
  
  You can add to or subtract from the number of instantiations of a task definition in a service by specifying the cluster that the service is running in and a new desiredCount parameter.
  
  You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when starting or running a task, or when creating or updating a service. For more infomation, see Amazon EBS volumes in the Amazon Elastic Container Service Developer Guide.
  
  If you have updated the container image of your application, you can create a new task definition with that image and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent parameters (in the service's deployment configuration) to determine the deployment strategy.
  
  If your updated Docker image uses the same tag as what is in the existing task definition for your service (for example, my_image:latest), you don't need to create a new revision of your task definition. You can update the service using the forceNewDeployment option. The new tasks launched by the deployment pull the current image/tag combination from your repository when they start.
  
  You can also update the deployment configuration of a service. When a deployment is triggered by updating the task definition of a service, the service scheduler uses the deployment configuration parameters, minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
  
  If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that don't use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they're in the RUNNING state and are reported as healthy by the load balancer.
  
  The maximumPercent parameter represents an upper limit on the number of running tasks during a deployment. You can use it to define the deployment batch size. For example, if desiredCount is four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available).
  
  When UpdateService stops a task during a deployment, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM and a 30-second timeout. After this, SIGKILL is sent and the containers are forcibly stopped. If the container handles the SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
  
  When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic.
  
  Determine which of the container instances in your cluster can support your service's task definition. For example, they have the required CPU, memory, ports, and container instance attributes.
  
  By default, the service scheduler attempts to balance tasks across Availability Zones in this manner even though you can choose a different placement strategy.
  
  Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
  
  Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
  
  When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
  
  Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
  
  Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
  
  You must have a service-linked role when you update any of the following service properties:
  
  loadBalancers,
  
  serviceRegistries
  
  For more information about the role see the CreateService request parameter role .
  
  This is a convenience which creates an instance of the UpdateServiceRequest.Builder avoiding the need to create one manually via UpdateServiceRequest.builder()
  
  Parameters:
  
  updateServiceRequest - A Consumer that will call methods on UpdateServiceRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateService operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateServicePrimaryTaskSet
  default UpdateServicePrimaryTaskSetResponse updateServicePrimaryTaskSet(UpdateServicePrimaryTaskSetRequest updateServicePrimaryTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException, AccessDeniedException, AwsServiceException, SdkClientException, EcsException
  
  Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task set in a service will transition to the service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  updateServicePrimaryTaskSetRequest -
  
  Returns:
  
  Result of the UpdateServicePrimaryTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateServicePrimaryTaskSet
  default UpdateServicePrimaryTaskSetResponse updateServicePrimaryTaskSet(Consumer<UpdateServicePrimaryTaskSetRequest.Builder> updateServicePrimaryTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException, AccessDeniedException, AwsServiceException, SdkClientException, EcsException
  
  Modifies which task set in a service is the primary task set. Any parameters that are updated on the primary task set in a service will transition to the service. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the UpdateServicePrimaryTaskSetRequest.Builder avoiding the need to create one manually via UpdateServicePrimaryTaskSetRequest.builder()
  
  Parameters:
  
  updateServicePrimaryTaskSetRequest - A Consumer that will call methods on UpdateServicePrimaryTaskSetRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateServicePrimaryTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateTaskProtection
  default UpdateTaskProtectionResponse updateTaskProtection(UpdateTaskProtectionRequest updateTaskProtectionRequest) throws AccessDeniedException, ClientException, ClusterNotFoundException, InvalidParameterException, ResourceNotFoundException, ServerException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Updates the protection status of a task. You can set protectionEnabled to true to protect your task from termination during scale-in events from Service Autoscaling or deployments.
  
  Task-protection, by default, expires after 2 hours at which point Amazon ECS clears the protectionEnabled property making the task eligible for termination by a subsequent scale-in event.
  
  You can specify a custom expiration period for task protection from 1 minute to up to 2,880 minutes (48 hours). To specify the custom expiration period, set the expiresInMinutes property. The expiresInMinutes property is always reset when you invoke this operation for a task that already has protectionEnabled set to true. You can keep extending the protection expiration period of a task by invoking this operation repeatedly.
  
  To learn more about Amazon ECS task protection, see Task scale-in protection in the Amazon Elastic Container Service Developer Guide .
  
  This operation is only supported for tasks belonging to an Amazon ECS service. Invoking this operation for a standalone task will result in an TASK_NOT_VALID failure. For more information, see API failure reasons.
  
  If you prefer to set task protection from within the container, we recommend using the Task scale-in protection endpoint.
  
  Parameters:
  
  updateTaskProtectionRequest -
  
  Returns:
  
  Result of the UpdateTaskProtection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateTaskProtection
  default UpdateTaskProtectionResponse updateTaskProtection(Consumer<UpdateTaskProtectionRequest.Builder> updateTaskProtectionRequest) throws AccessDeniedException, ClientException, ClusterNotFoundException, InvalidParameterException, ResourceNotFoundException, ServerException, UnsupportedFeatureException, AwsServiceException, SdkClientException, EcsException
  
  Updates the protection status of a task. You can set protectionEnabled to true to protect your task from termination during scale-in events from Service Autoscaling or deployments.
  
  Task-protection, by default, expires after 2 hours at which point Amazon ECS clears the protectionEnabled property making the task eligible for termination by a subsequent scale-in event.
  
  You can specify a custom expiration period for task protection from 1 minute to up to 2,880 minutes (48 hours). To specify the custom expiration period, set the expiresInMinutes property. The expiresInMinutes property is always reset when you invoke this operation for a task that already has protectionEnabled set to true. You can keep extending the protection expiration period of a task by invoking this operation repeatedly.
  
  To learn more about Amazon ECS task protection, see Task scale-in protection in the Amazon Elastic Container Service Developer Guide .
  
  This operation is only supported for tasks belonging to an Amazon ECS service. Invoking this operation for a standalone task will result in an TASK_NOT_VALID failure. For more information, see API failure reasons.
  
  If you prefer to set task protection from within the container, we recommend using the Task scale-in protection endpoint.
  
  This is a convenience which creates an instance of the UpdateTaskProtectionRequest.Builder avoiding the need to create one manually via UpdateTaskProtectionRequest.builder()
  
  Parameters:
  
  updateTaskProtectionRequest - A Consumer that will call methods on UpdateTaskProtectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateTaskProtection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateTaskSet
  default UpdateTaskSetResponse updateTaskSet(UpdateTaskSetRequest updateTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Modifies a task set. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
  
  Parameters:
  
  updateTaskSetRequest -
  
  Returns:
  
  Result of the UpdateTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateTaskSet
  default UpdateTaskSetResponse updateTaskSet(Consumer<UpdateTaskSetRequest.Builder> updateTaskSetRequest) throws ServerException, ClientException, InvalidParameterException, ClusterNotFoundException, UnsupportedFeatureException, AccessDeniedException, ServiceNotFoundException, ServiceNotActiveException, TaskSetNotFoundException, AwsServiceException, SdkClientException, EcsException
  
  Modifies a task set. This is used when a service uses the EXTERNAL deployment controller type. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
  
  This is a convenience which creates an instance of the UpdateTaskSetRequest.Builder avoiding the need to create one manually via UpdateTaskSetRequest.builder()
  
  Parameters:
  
  updateTaskSetRequest - A Consumer that will call methods on UpdateTaskSetRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateTaskSet operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- waiter
  
  default EcsWaiter waiter()
  
  Create an instance of EcsWaiter using this client.
  Waiters created via this method are managed by the SDK and resources will be released when the service client is closed.
  
  Returns:
  
  an instance of EcsWaiter
- create
  
  static EcsClient create()
  
  Create a EcsClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
- builder
  
  static EcsClientBuilder builder()
  
  Create a builder that can be used to configure and create a EcsClient.
- serviceMetadata
  
  static ServiceMetadata serviceMetadata()
- serviceClientConfiguration
  
  default EcsServiceClientConfiguration serviceClientConfiguration()
  
  Description copied from interface: SdkClient
  
  The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
  
  Specified by:
  
  serviceClientConfiguration in interface AwsClient
  
  Specified by:
  
  serviceClientConfiguration in interface SdkClient
  
  Returns:
  
  SdkServiceClientConfiguration

Interface EcsClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Details

SERVICE_NAME

SERVICE_METADATA_ID

Method Details

createCapacityProvider

createCapacityProvider

createCluster

createCluster

createCluster

createService

createService

createTaskSet

createTaskSet

deleteAccountSetting

deleteAccountSetting

deleteAttributes

deleteAttributes

deleteCapacityProvider

deleteCapacityProvider

deleteCluster

deleteCluster

deleteService

deleteService

deleteTaskDefinitions

deleteTaskDefinitions

deleteTaskSet

deleteTaskSet

deregisterContainerInstance

deregisterContainerInstance

deregisterTaskDefinition

deregisterTaskDefinition

describeCapacityProviders

describeCapacityProviders

describeClusters

describeClusters

describeClusters

describeContainerInstances

describeContainerInstances

describeServices

describeServices

describeTaskDefinition

describeTaskDefinition

describeTaskSets

describeTaskSets

describeTasks

describeTasks

discoverPollEndpoint

discoverPollEndpoint

executeCommand

executeCommand

getTaskProtection

getTaskProtection

listAccountSettings

listAccountSettings

listAccountSettings

listAccountSettingsPaginator

listAccountSettingsPaginator

listAccountSettingsPaginator

listAttributes

listAttributes

listAttributesPaginator

listAttributesPaginator

listClusters

listClusters

listClusters

listClustersPaginator

listClustersPaginator

listClustersPaginator

listContainerInstances

listContainerInstances

listContainerInstances

listContainerInstancesPaginator

listContainerInstancesPaginator

listContainerInstancesPaginator

listServices