All Superinterfaces:: AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface DirectConnectClient extends AwsClient

Service client for accessing AWS Direct Connect. This can be created using the static builder() method.

Direct Connect links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router. With this connection in place, you can create virtual interfaces directly to the Amazon Web Services Cloud (for example, to Amazon EC2 and Amazon S3) and to Amazon VPC, bypassing Internet service providers in your network path. A connection provides access to all Amazon Web Services Regions except the China (Beijing) and (China) Ningxia Regions. Amazon Web Services resources in the China Regions can only be accessed through locations associated with those Regions.

Field Summary

Fields

Modifier and Type

Field

Description

static final String

SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

static final String

SERVICE_NAME
Method Summary

Modifier and Type

Method

Description

default AcceptDirectConnectGatewayAssociationProposalResponse

acceptDirectConnectGatewayAssociationProposal(Consumer<AcceptDirectConnectGatewayAssociationProposalRequest.Builder> acceptDirectConnectGatewayAssociationProposalRequest)

Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.

default AcceptDirectConnectGatewayAssociationProposalResponse

acceptDirectConnectGatewayAssociationProposal(AcceptDirectConnectGatewayAssociationProposalRequest acceptDirectConnectGatewayAssociationProposalRequest)

Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.

default AllocateHostedConnectionResponse

allocateHostedConnection(Consumer<AllocateHostedConnectionRequest.Builder> allocateHostedConnectionRequest)

Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.

default AllocateHostedConnectionResponse

allocateHostedConnection(AllocateHostedConnectionRequest allocateHostedConnectionRequest)

Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.

default AllocatePrivateVirtualInterfaceResponse

allocatePrivateVirtualInterface(Consumer<AllocatePrivateVirtualInterfaceRequest.Builder> allocatePrivateVirtualInterfaceRequest)

Provisions a private virtual interface to be owned by the specified Amazon Web Services account.

default AllocatePrivateVirtualInterfaceResponse

allocatePrivateVirtualInterface(AllocatePrivateVirtualInterfaceRequest allocatePrivateVirtualInterfaceRequest)

Provisions a private virtual interface to be owned by the specified Amazon Web Services account.

default AllocatePublicVirtualInterfaceResponse

allocatePublicVirtualInterface(Consumer<AllocatePublicVirtualInterfaceRequest.Builder> allocatePublicVirtualInterfaceRequest)

Provisions a public virtual interface to be owned by the specified Amazon Web Services account.

default AllocatePublicVirtualInterfaceResponse

allocatePublicVirtualInterface(AllocatePublicVirtualInterfaceRequest allocatePublicVirtualInterfaceRequest)

Provisions a public virtual interface to be owned by the specified Amazon Web Services account.

default AllocateTransitVirtualInterfaceResponse

allocateTransitVirtualInterface(Consumer<AllocateTransitVirtualInterfaceRequest.Builder> allocateTransitVirtualInterfaceRequest)

Provisions a transit virtual interface to be owned by the specified Amazon Web Services account.

default AllocateTransitVirtualInterfaceResponse

allocateTransitVirtualInterface(AllocateTransitVirtualInterfaceRequest allocateTransitVirtualInterfaceRequest)

Provisions a transit virtual interface to be owned by the specified Amazon Web Services account.

default AssociateConnectionWithLagResponse

associateConnectionWithLag(Consumer<AssociateConnectionWithLagRequest.Builder> associateConnectionWithLagRequest)

Associates an existing connection with a link aggregation group (LAG).

default AssociateConnectionWithLagResponse

associateConnectionWithLag(AssociateConnectionWithLagRequest associateConnectionWithLagRequest)

Associates an existing connection with a link aggregation group (LAG).

default AssociateHostedConnectionResponse

associateHostedConnection(Consumer<AssociateHostedConnectionRequest.Builder> associateHostedConnectionRequest)

Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect.

default AssociateHostedConnectionResponse

associateHostedConnection(AssociateHostedConnectionRequest associateHostedConnectionRequest)

Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect.

default AssociateMacSecKeyResponse

associateMacSecKey(Consumer<AssociateMacSecKeyRequest.Builder> associateMacSecKeyRequest)

Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.

default AssociateMacSecKeyResponse

associateMacSecKey(AssociateMacSecKeyRequest associateMacSecKeyRequest)

Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.

default AssociateVirtualInterfaceResponse

associateVirtualInterface(Consumer<AssociateVirtualInterfaceRequest.Builder> associateVirtualInterfaceRequest)

Associates a virtual interface with a specified link aggregation group (LAG) or connection.

default AssociateVirtualInterfaceResponse

associateVirtualInterface(AssociateVirtualInterfaceRequest associateVirtualInterfaceRequest)

Associates a virtual interface with a specified link aggregation group (LAG) or connection.

static DirectConnectClientBuilder

builder()

Create a builder that can be used to configure and create a DirectConnectClient.

default ConfirmConnectionResponse

confirmConnection(Consumer<ConfirmConnectionRequest.Builder> confirmConnectionRequest)

Confirms the creation of the specified hosted connection on an interconnect.

default ConfirmConnectionResponse

confirmConnection(ConfirmConnectionRequest confirmConnectionRequest)

Confirms the creation of the specified hosted connection on an interconnect.

default ConfirmCustomerAgreementResponse

confirmCustomerAgreement(Consumer<ConfirmCustomerAgreementRequest.Builder> confirmCustomerAgreementRequest)

The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).

default ConfirmCustomerAgreementResponse

confirmCustomerAgreement(ConfirmCustomerAgreementRequest confirmCustomerAgreementRequest)

The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).

default ConfirmPrivateVirtualInterfaceResponse

confirmPrivateVirtualInterface(Consumer<ConfirmPrivateVirtualInterfaceRequest.Builder> confirmPrivateVirtualInterfaceRequest)

Accepts ownership of a private virtual interface created by another Amazon Web Services account.

default ConfirmPrivateVirtualInterfaceResponse

confirmPrivateVirtualInterface(ConfirmPrivateVirtualInterfaceRequest confirmPrivateVirtualInterfaceRequest)

Accepts ownership of a private virtual interface created by another Amazon Web Services account.

default ConfirmPublicVirtualInterfaceResponse

confirmPublicVirtualInterface(Consumer<ConfirmPublicVirtualInterfaceRequest.Builder> confirmPublicVirtualInterfaceRequest)

Accepts ownership of a public virtual interface created by another Amazon Web Services account.

default ConfirmPublicVirtualInterfaceResponse

confirmPublicVirtualInterface(ConfirmPublicVirtualInterfaceRequest confirmPublicVirtualInterfaceRequest)

Accepts ownership of a public virtual interface created by another Amazon Web Services account.

default ConfirmTransitVirtualInterfaceResponse

confirmTransitVirtualInterface(Consumer<ConfirmTransitVirtualInterfaceRequest.Builder> confirmTransitVirtualInterfaceRequest)

Accepts ownership of a transit virtual interface created by another Amazon Web Services account.

default ConfirmTransitVirtualInterfaceResponse

confirmTransitVirtualInterface(ConfirmTransitVirtualInterfaceRequest confirmTransitVirtualInterfaceRequest)

Accepts ownership of a transit virtual interface created by another Amazon Web Services account.

static DirectConnectClient

create()

Create a DirectConnectClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

default CreateBgpPeerResponse

createBGPPeer(Consumer<CreateBgpPeerRequest.Builder> createBgpPeerRequest)

Creates a BGP peer on the specified virtual interface.

default CreateBgpPeerResponse

createBGPPeer(CreateBgpPeerRequest createBgpPeerRequest)

Creates a BGP peer on the specified virtual interface.

default CreateConnectionResponse

createConnection(Consumer<CreateConnectionRequest.Builder> createConnectionRequest)

Creates a connection between a customer network and a specific Direct Connect location.

default CreateConnectionResponse

createConnection(CreateConnectionRequest createConnectionRequest)

Creates a connection between a customer network and a specific Direct Connect location.

default CreateDirectConnectGatewayResponse

createDirectConnectGateway(Consumer<CreateDirectConnectGatewayRequest.Builder> createDirectConnectGatewayRequest)

Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways.

default CreateDirectConnectGatewayResponse

createDirectConnectGateway(CreateDirectConnectGatewayRequest createDirectConnectGatewayRequest)

Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways.

default CreateDirectConnectGatewayAssociationResponse

createDirectConnectGatewayAssociation(Consumer<CreateDirectConnectGatewayAssociationRequest.Builder> createDirectConnectGatewayAssociationRequest)

Creates an association between a Direct Connect gateway and a virtual private gateway.

default CreateDirectConnectGatewayAssociationResponse

createDirectConnectGatewayAssociation(CreateDirectConnectGatewayAssociationRequest createDirectConnectGatewayAssociationRequest)

Creates an association between a Direct Connect gateway and a virtual private gateway.

default CreateDirectConnectGatewayAssociationProposalResponse

createDirectConnectGatewayAssociationProposal(Consumer<CreateDirectConnectGatewayAssociationProposalRequest.Builder> createDirectConnectGatewayAssociationProposalRequest)

Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.

default CreateDirectConnectGatewayAssociationProposalResponse

createDirectConnectGatewayAssociationProposal(CreateDirectConnectGatewayAssociationProposalRequest createDirectConnectGatewayAssociationProposalRequest)

Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.

default CreateInterconnectResponse

createInterconnect(Consumer<CreateInterconnectRequest.Builder> createInterconnectRequest)

Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.

default CreateInterconnectResponse

createInterconnect(CreateInterconnectRequest createInterconnectRequest)

Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.

default CreateLagResponse

createLag(Consumer<CreateLagRequest.Builder> createLagRequest)

Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location.

default CreateLagResponse

createLag(CreateLagRequest createLagRequest)

Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location.

default CreatePrivateVirtualInterfaceResponse

createPrivateVirtualInterface(Consumer<CreatePrivateVirtualInterfaceRequest.Builder> createPrivateVirtualInterfaceRequest)

Creates a private virtual interface.

default CreatePrivateVirtualInterfaceResponse

createPrivateVirtualInterface(CreatePrivateVirtualInterfaceRequest createPrivateVirtualInterfaceRequest)

Creates a private virtual interface.

default CreatePublicVirtualInterfaceResponse

createPublicVirtualInterface(Consumer<CreatePublicVirtualInterfaceRequest.Builder> createPublicVirtualInterfaceRequest)

Creates a public virtual interface.

default CreatePublicVirtualInterfaceResponse

createPublicVirtualInterface(CreatePublicVirtualInterfaceRequest createPublicVirtualInterfaceRequest)

Creates a public virtual interface.

default CreateTransitVirtualInterfaceResponse

createTransitVirtualInterface(Consumer<CreateTransitVirtualInterfaceRequest.Builder> createTransitVirtualInterfaceRequest)

Creates a transit virtual interface.

default CreateTransitVirtualInterfaceResponse

createTransitVirtualInterface(CreateTransitVirtualInterfaceRequest createTransitVirtualInterfaceRequest)

Creates a transit virtual interface.

default DeleteBgpPeerResponse

deleteBGPPeer(Consumer<DeleteBgpPeerRequest.Builder> deleteBgpPeerRequest)

Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.

default DeleteBgpPeerResponse

deleteBGPPeer(DeleteBgpPeerRequest deleteBgpPeerRequest)

Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.

default DeleteConnectionResponse

deleteConnection(Consumer<DeleteConnectionRequest.Builder> deleteConnectionRequest)

Deletes the specified connection.

default DeleteConnectionResponse

deleteConnection(DeleteConnectionRequest deleteConnectionRequest)

Deletes the specified connection.

default DeleteDirectConnectGatewayResponse

deleteDirectConnectGateway(Consumer<DeleteDirectConnectGatewayRequest.Builder> deleteDirectConnectGatewayRequest)

Deletes the specified Direct Connect gateway.

default DeleteDirectConnectGatewayResponse

deleteDirectConnectGateway(DeleteDirectConnectGatewayRequest deleteDirectConnectGatewayRequest)

Deletes the specified Direct Connect gateway.

default DeleteDirectConnectGatewayAssociationResponse

deleteDirectConnectGatewayAssociation(Consumer<DeleteDirectConnectGatewayAssociationRequest.Builder> deleteDirectConnectGatewayAssociationRequest)

Deletes the association between the specified Direct Connect gateway and virtual private gateway.

default DeleteDirectConnectGatewayAssociationResponse

deleteDirectConnectGatewayAssociation(DeleteDirectConnectGatewayAssociationRequest deleteDirectConnectGatewayAssociationRequest)

Deletes the association between the specified Direct Connect gateway and virtual private gateway.

default DeleteDirectConnectGatewayAssociationProposalResponse

deleteDirectConnectGatewayAssociationProposal(Consumer<DeleteDirectConnectGatewayAssociationProposalRequest.Builder> deleteDirectConnectGatewayAssociationProposalRequest)

Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.

default DeleteDirectConnectGatewayAssociationProposalResponse

deleteDirectConnectGatewayAssociationProposal(DeleteDirectConnectGatewayAssociationProposalRequest deleteDirectConnectGatewayAssociationProposalRequest)

Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.

default DeleteInterconnectResponse

deleteInterconnect(Consumer<DeleteInterconnectRequest.Builder> deleteInterconnectRequest)

Deletes the specified interconnect.

default DeleteInterconnectResponse

deleteInterconnect(DeleteInterconnectRequest deleteInterconnectRequest)

Deletes the specified interconnect.

default DeleteLagResponse

deleteLag(Consumer<DeleteLagRequest.Builder> deleteLagRequest)

Deletes the specified link aggregation group (LAG).

default DeleteLagResponse

deleteLag(DeleteLagRequest deleteLagRequest)

Deletes the specified link aggregation group (LAG).

default DeleteVirtualInterfaceResponse

deleteVirtualInterface(Consumer<DeleteVirtualInterfaceRequest.Builder> deleteVirtualInterfaceRequest)

Deletes a virtual interface.

default DeleteVirtualInterfaceResponse

deleteVirtualInterface(DeleteVirtualInterfaceRequest deleteVirtualInterfaceRequest)

Deletes a virtual interface.

default DescribeConnectionsResponse

describeConnections()

Displays the specified connection or all connections in this Region.

default DescribeConnectionsResponse

describeConnections(Consumer<DescribeConnectionsRequest.Builder> describeConnectionsRequest)

Displays the specified connection or all connections in this Region.

default DescribeConnectionsResponse

describeConnections(DescribeConnectionsRequest describeConnectionsRequest)

Displays the specified connection or all connections in this Region.

default DescribeCustomerMetadataResponse

describeCustomerMetadata(Consumer<DescribeCustomerMetadataRequest.Builder> describeCustomerMetadataRequest)

Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.

default DescribeCustomerMetadataResponse

describeCustomerMetadata(DescribeCustomerMetadataRequest describeCustomerMetadataRequest)

Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.

default DescribeDirectConnectGatewayAssociationProposalsResponse

describeDirectConnectGatewayAssociationProposals(Consumer<DescribeDirectConnectGatewayAssociationProposalsRequest.Builder> describeDirectConnectGatewayAssociationProposalsRequest)

Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.

default DescribeDirectConnectGatewayAssociationProposalsResponse

describeDirectConnectGatewayAssociationProposals(DescribeDirectConnectGatewayAssociationProposalsRequest describeDirectConnectGatewayAssociationProposalsRequest)

Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.

default DescribeDirectConnectGatewayAssociationsResponse

describeDirectConnectGatewayAssociations(Consumer<DescribeDirectConnectGatewayAssociationsRequest.Builder> describeDirectConnectGatewayAssociationsRequest)

Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways.

default DescribeDirectConnectGatewayAssociationsResponse

describeDirectConnectGatewayAssociations(DescribeDirectConnectGatewayAssociationsRequest describeDirectConnectGatewayAssociationsRequest)

Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways.

default DescribeDirectConnectGatewayAttachmentsResponse

describeDirectConnectGatewayAttachments(Consumer<DescribeDirectConnectGatewayAttachmentsRequest.Builder> describeDirectConnectGatewayAttachmentsRequest)

Lists the attachments between your Direct Connect gateways and virtual interfaces.

default DescribeDirectConnectGatewayAttachmentsResponse

describeDirectConnectGatewayAttachments(DescribeDirectConnectGatewayAttachmentsRequest describeDirectConnectGatewayAttachmentsRequest)

Lists the attachments between your Direct Connect gateways and virtual interfaces.

default DescribeDirectConnectGatewaysResponse

describeDirectConnectGateways()

Lists all your Direct Connect gateways or only the specified Direct Connect gateway.

default DescribeDirectConnectGatewaysResponse

describeDirectConnectGateways(Consumer<DescribeDirectConnectGatewaysRequest.Builder> describeDirectConnectGatewaysRequest)

Lists all your Direct Connect gateways or only the specified Direct Connect gateway.

default DescribeDirectConnectGatewaysResponse

describeDirectConnectGateways(DescribeDirectConnectGatewaysRequest describeDirectConnectGatewaysRequest)

Lists all your Direct Connect gateways or only the specified Direct Connect gateway.

default DescribeHostedConnectionsResponse

describeHostedConnections(Consumer<DescribeHostedConnectionsRequest.Builder> describeHostedConnectionsRequest)

Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).

default DescribeHostedConnectionsResponse

describeHostedConnections(DescribeHostedConnectionsRequest describeHostedConnectionsRequest)

Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).

default DescribeInterconnectsResponse

describeInterconnects()

Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.

default DescribeInterconnectsResponse

describeInterconnects(Consumer<DescribeInterconnectsRequest.Builder> describeInterconnectsRequest)

Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.

default DescribeInterconnectsResponse

describeInterconnects(DescribeInterconnectsRequest describeInterconnectsRequest)

Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.

default DescribeLagsResponse

describeLags()

Describes all your link aggregation groups (LAG) or the specified LAG.

default DescribeLagsResponse

describeLags(Consumer<DescribeLagsRequest.Builder> describeLagsRequest)

Describes all your link aggregation groups (LAG) or the specified LAG.

default DescribeLagsResponse

describeLags(DescribeLagsRequest describeLagsRequest)

Describes all your link aggregation groups (LAG) or the specified LAG.

default DescribeLoaResponse

describeLoa(Consumer<DescribeLoaRequest.Builder> describeLoaRequest)

Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).

default DescribeLoaResponse

describeLoa(DescribeLoaRequest describeLoaRequest)

Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).

default DescribeLocationsResponse

describeLocations()

Lists the Direct Connect locations in the current Amazon Web Services Region.

default DescribeLocationsResponse

describeLocations(Consumer<DescribeLocationsRequest.Builder> describeLocationsRequest)

Lists the Direct Connect locations in the current Amazon Web Services Region.

default DescribeLocationsResponse

describeLocations(DescribeLocationsRequest describeLocationsRequest)

Lists the Direct Connect locations in the current Amazon Web Services Region.

default DescribeRouterConfigurationResponse

describeRouterConfiguration(Consumer<DescribeRouterConfigurationRequest.Builder> describeRouterConfigurationRequest)

Details about the router.

default DescribeRouterConfigurationResponse

describeRouterConfiguration(DescribeRouterConfigurationRequest describeRouterConfigurationRequest)

Details about the router.

default DescribeTagsResponse

describeTags(Consumer<DescribeTagsRequest.Builder> describeTagsRequest)

Describes the tags associated with the specified Direct Connect resources.

default DescribeTagsResponse

describeTags(DescribeTagsRequest describeTagsRequest)

Describes the tags associated with the specified Direct Connect resources.

default DescribeVirtualGatewaysResponse

describeVirtualGateways()

default DescribeVirtualGatewaysResponse

describeVirtualGateways(Consumer<DescribeVirtualGatewaysRequest.Builder> describeVirtualGatewaysRequest)

default DescribeVirtualGatewaysResponse

describeVirtualGateways(DescribeVirtualGatewaysRequest describeVirtualGatewaysRequest)

default DescribeVirtualInterfacesResponse

describeVirtualInterfaces()

Displays all virtual interfaces for an Amazon Web Services account.

default DescribeVirtualInterfacesResponse

describeVirtualInterfaces(Consumer<DescribeVirtualInterfacesRequest.Builder> describeVirtualInterfacesRequest)

Displays all virtual interfaces for an Amazon Web Services account.

default DescribeVirtualInterfacesResponse

describeVirtualInterfaces(DescribeVirtualInterfacesRequest describeVirtualInterfacesRequest)

Displays all virtual interfaces for an Amazon Web Services account.

default DisassociateConnectionFromLagResponse

disassociateConnectionFromLag(Consumer<DisassociateConnectionFromLagRequest.Builder> disassociateConnectionFromLagRequest)

Disassociates a connection from a link aggregation group (LAG).

default DisassociateConnectionFromLagResponse

disassociateConnectionFromLag(DisassociateConnectionFromLagRequest disassociateConnectionFromLagRequest)

Disassociates a connection from a link aggregation group (LAG).

default DisassociateMacSecKeyResponse

disassociateMacSecKey(Consumer<DisassociateMacSecKeyRequest.Builder> disassociateMacSecKeyRequest)

Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.

default DisassociateMacSecKeyResponse

disassociateMacSecKey(DisassociateMacSecKeyRequest disassociateMacSecKeyRequest)

Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.

default ListVirtualInterfaceTestHistoryResponse

listVirtualInterfaceTestHistory(Consumer<ListVirtualInterfaceTestHistoryRequest.Builder> listVirtualInterfaceTestHistoryRequest)

Lists the virtual interface failover test history.

default ListVirtualInterfaceTestHistoryResponse

listVirtualInterfaceTestHistory(ListVirtualInterfaceTestHistoryRequest listVirtualInterfaceTestHistoryRequest)

Lists the virtual interface failover test history.

default DirectConnectServiceClientConfiguration

serviceClientConfiguration()

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

static ServiceMetadata

serviceMetadata()

default StartBgpFailoverTestResponse

startBgpFailoverTest(Consumer<StartBgpFailoverTestRequest.Builder> startBgpFailoverTestRequest)

Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state.

default StartBgpFailoverTestResponse

startBgpFailoverTest(StartBgpFailoverTestRequest startBgpFailoverTestRequest)

Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state.

default StopBgpFailoverTestResponse

stopBgpFailoverTest(Consumer<StopBgpFailoverTestRequest.Builder> stopBgpFailoverTestRequest)

Stops the virtual interface failover test.

default StopBgpFailoverTestResponse

stopBgpFailoverTest(StopBgpFailoverTestRequest stopBgpFailoverTestRequest)

Stops the virtual interface failover test.

default TagResourceResponse

tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)

Adds the specified tags to the specified Direct Connect resource.

default TagResourceResponse

tagResource(TagResourceRequest tagResourceRequest)

Adds the specified tags to the specified Direct Connect resource.

default UntagResourceResponse

untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)

Removes one or more tags from the specified Direct Connect resource.

default UntagResourceResponse

untagResource(UntagResourceRequest untagResourceRequest)

Removes one or more tags from the specified Direct Connect resource.

default UpdateConnectionResponse

updateConnection(Consumer<UpdateConnectionRequest.Builder> updateConnectionRequest)

Updates the Direct Connect dedicated connection configuration.

default UpdateConnectionResponse

updateConnection(UpdateConnectionRequest updateConnectionRequest)

Updates the Direct Connect dedicated connection configuration.

default UpdateDirectConnectGatewayResponse

updateDirectConnectGateway(Consumer<UpdateDirectConnectGatewayRequest.Builder> updateDirectConnectGatewayRequest)

Updates the name of a current Direct Connect gateway.

default UpdateDirectConnectGatewayResponse

updateDirectConnectGateway(UpdateDirectConnectGatewayRequest updateDirectConnectGatewayRequest)

Updates the name of a current Direct Connect gateway.

default UpdateDirectConnectGatewayAssociationResponse

updateDirectConnectGatewayAssociation(Consumer<UpdateDirectConnectGatewayAssociationRequest.Builder> updateDirectConnectGatewayAssociationRequest)

Updates the specified attributes of the Direct Connect gateway association.

default UpdateDirectConnectGatewayAssociationResponse

updateDirectConnectGatewayAssociation(UpdateDirectConnectGatewayAssociationRequest updateDirectConnectGatewayAssociationRequest)

Updates the specified attributes of the Direct Connect gateway association.

default UpdateLagResponse

updateLag(Consumer<UpdateLagRequest.Builder> updateLagRequest)

Updates the attributes of the specified link aggregation group (LAG).

default UpdateLagResponse

updateLag(UpdateLagRequest updateLagRequest)

Updates the attributes of the specified link aggregation group (LAG).

default UpdateVirtualInterfaceAttributesResponse

updateVirtualInterfaceAttributes(Consumer<UpdateVirtualInterfaceAttributesRequest.Builder> updateVirtualInterfaceAttributesRequest)

Updates the specified attributes of the specified virtual private interface.

default UpdateVirtualInterfaceAttributesResponse

updateVirtualInterfaceAttributes(UpdateVirtualInterfaceAttributesRequest updateVirtualInterfaceAttributesRequest)

Updates the specified attributes of the specified virtual private interface.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Field Details
- SERVICE_NAME
  static final String SERVICE_NAME
  
  See Also:
  
  Constant Field Values
- SERVICE_METADATA_ID
  static final String SERVICE_METADATA_ID
  
  Value for looking up the service's metadata from the ServiceMetadataProvider.
  
  See Also:
  
  Constant Field Values
Method Details
- acceptDirectConnectGatewayAssociationProposal
  default AcceptDirectConnectGatewayAssociationProposalResponse acceptDirectConnectGatewayAssociationProposal(AcceptDirectConnectGatewayAssociationProposalRequest acceptDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.
  
  Parameters:
  
  acceptDirectConnectGatewayAssociationProposalRequest -
  
  Returns:
  
  Result of the AcceptDirectConnectGatewayAssociationProposal operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- acceptDirectConnectGatewayAssociationProposal
  default AcceptDirectConnectGatewayAssociationProposalResponse acceptDirectConnectGatewayAssociationProposal(Consumer<AcceptDirectConnectGatewayAssociationProposalRequest.Builder> acceptDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts a proposal request to attach a virtual private gateway or transit gateway to a Direct Connect gateway.
  
  This is a convenience which creates an instance of the AcceptDirectConnectGatewayAssociationProposalRequest.Builder avoiding the need to create one manually via AcceptDirectConnectGatewayAssociationProposalRequest.builder()
  
  Parameters:
  
  acceptDirectConnectGatewayAssociationProposalRequest - A Consumer that will call methods on AcceptDirectConnectGatewayAssociationProposalRequest.Builder to create a request.
  
  Returns:
  
  Result of the AcceptDirectConnectGatewayAssociationProposal operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocateHostedConnection
  default AllocateHostedConnectionResponse allocateHostedConnection(AllocateHostedConnectionRequest allocateHostedConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.
  
  Allocates a VLAN number and a specified amount of capacity (bandwidth) for use by a hosted connection on the specified interconnect or LAG of interconnects. Amazon Web Services polices the hosted connection for the specified capacity and the Direct Connect Partner must also police the hosted connection for the specified capacity.
  
  Intended for use by Direct Connect Partners only.
  
  Parameters:
  
  allocateHostedConnectionRequest -
  
  Returns:
  
  Result of the AllocateHostedConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocateHostedConnection
  default AllocateHostedConnectionResponse allocateHostedConnection(Consumer<AllocateHostedConnectionRequest.Builder> allocateHostedConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a hosted connection on the specified interconnect or a link aggregation group (LAG) of interconnects.
  
  Allocates a VLAN number and a specified amount of capacity (bandwidth) for use by a hosted connection on the specified interconnect or LAG of interconnects. Amazon Web Services polices the hosted connection for the specified capacity and the Direct Connect Partner must also police the hosted connection for the specified capacity.
  
  Intended for use by Direct Connect Partners only.
  
  This is a convenience which creates an instance of the AllocateHostedConnectionRequest.Builder avoiding the need to create one manually via AllocateHostedConnectionRequest.builder()
  
  Parameters:
  
  allocateHostedConnectionRequest - A Consumer that will call methods on AllocateHostedConnectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the AllocateHostedConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocatePrivateVirtualInterface
  default AllocatePrivateVirtualInterfaceResponse allocatePrivateVirtualInterface(AllocatePrivateVirtualInterfaceRequest allocatePrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Provisions a private virtual interface to be owned by the specified Amazon Web Services account.
  
  Virtual interfaces created using this action must be confirmed by the owner using ConfirmPrivateVirtualInterface. Until then, the virtual interface is in the Confirming state and is not available to handle traffic.
  
  Parameters:
  
  allocatePrivateVirtualInterfaceRequest -
  
  Returns:
  
  Result of the AllocatePrivateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocatePrivateVirtualInterface
  default AllocatePrivateVirtualInterfaceResponse allocatePrivateVirtualInterface(Consumer<AllocatePrivateVirtualInterfaceRequest.Builder> allocatePrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Provisions a private virtual interface to be owned by the specified Amazon Web Services account.
  
  Virtual interfaces created using this action must be confirmed by the owner using ConfirmPrivateVirtualInterface. Until then, the virtual interface is in the Confirming state and is not available to handle traffic.
  
  This is a convenience which creates an instance of the AllocatePrivateVirtualInterfaceRequest.Builder avoiding the need to create one manually via AllocatePrivateVirtualInterfaceRequest.builder()
  
  Parameters:
  
  allocatePrivateVirtualInterfaceRequest - A Consumer that will call methods on AllocatePrivateVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the AllocatePrivateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocatePublicVirtualInterface
  default AllocatePublicVirtualInterfaceResponse allocatePublicVirtualInterface(AllocatePublicVirtualInterfaceRequest allocatePublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Provisions a public virtual interface to be owned by the specified Amazon Web Services account.
  
  The owner of a connection calls this function to provision a public virtual interface to be owned by the specified Amazon Web Services account.
  
  Virtual interfaces created using this function must be confirmed by the owner using ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface is in the confirming state and is not available to handle traffic.
  
  When creating an IPv6 public virtual interface, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
  
  Parameters:
  
  allocatePublicVirtualInterfaceRequest -
  
  Returns:
  
  Result of the AllocatePublicVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocatePublicVirtualInterface
  default AllocatePublicVirtualInterfaceResponse allocatePublicVirtualInterface(Consumer<AllocatePublicVirtualInterfaceRequest.Builder> allocatePublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Provisions a public virtual interface to be owned by the specified Amazon Web Services account.
  
  The owner of a connection calls this function to provision a public virtual interface to be owned by the specified Amazon Web Services account.
  
  Virtual interfaces created using this function must be confirmed by the owner using ConfirmPublicVirtualInterface. Until this step has been completed, the virtual interface is in the confirming state and is not available to handle traffic.
  
  When creating an IPv6 public virtual interface, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
  
  This is a convenience which creates an instance of the AllocatePublicVirtualInterfaceRequest.Builder avoiding the need to create one manually via AllocatePublicVirtualInterfaceRequest.builder()
  
  Parameters:
  
  allocatePublicVirtualInterfaceRequest - A Consumer that will call methods on AllocatePublicVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the AllocatePublicVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocateTransitVirtualInterface
  default AllocateTransitVirtualInterfaceResponse allocateTransitVirtualInterface(AllocateTransitVirtualInterfaceRequest allocateTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Provisions a transit virtual interface to be owned by the specified Amazon Web Services account. Use this type of interface to connect a transit gateway to your Direct Connect gateway.
  
  The owner of a connection provisions a transit virtual interface to be owned by the specified Amazon Web Services account.
  
  After you create a transit virtual interface, it must be confirmed by the owner using ConfirmTransitVirtualInterface. Until this step has been completed, the transit virtual interface is in the requested state and is not available to handle traffic.
  
  Parameters:
  
  allocateTransitVirtualInterfaceRequest -
  
  Returns:
  
  Result of the AllocateTransitVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- allocateTransitVirtualInterface
  default AllocateTransitVirtualInterfaceResponse allocateTransitVirtualInterface(Consumer<AllocateTransitVirtualInterfaceRequest.Builder> allocateTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Provisions a transit virtual interface to be owned by the specified Amazon Web Services account. Use this type of interface to connect a transit gateway to your Direct Connect gateway.
  
  The owner of a connection provisions a transit virtual interface to be owned by the specified Amazon Web Services account.
  
  After you create a transit virtual interface, it must be confirmed by the owner using ConfirmTransitVirtualInterface. Until this step has been completed, the transit virtual interface is in the requested state and is not available to handle traffic.
  
  This is a convenience which creates an instance of the AllocateTransitVirtualInterfaceRequest.Builder avoiding the need to create one manually via AllocateTransitVirtualInterfaceRequest.builder()
  
  Parameters:
  
  allocateTransitVirtualInterfaceRequest - A Consumer that will call methods on AllocateTransitVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the AllocateTransitVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateConnectionWithLag
  default AssociateConnectionWithLagResponse associateConnectionWithLag(AssociateConnectionWithLagRequest associateConnectionWithLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to Amazon Web Services is interrupted). The connection must be hosted on the same Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can re-associate a connection that's currently associated with a different LAG; however, if removing the connection would cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
  
  Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
  
  For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original LAG.
  
  Parameters:
  
  associateConnectionWithLagRequest -
  
  Returns:
  
  Result of the AssociateConnectionWithLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateConnectionWithLag
  default AssociateConnectionWithLagResponse associateConnectionWithLag(Consumer<AssociateConnectionWithLagRequest.Builder> associateConnectionWithLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to Amazon Web Services is interrupted). The connection must be hosted on the same Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can re-associate a connection that's currently associated with a different LAG; however, if removing the connection would cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
  
  Any virtual interfaces that are directly associated with the connection are automatically re-associated with the LAG. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
  
  For interconnects, any hosted connections are automatically re-associated with the LAG. If the interconnect was originally associated with a different LAG, the hosted connections remain associated with the original LAG.
  
  This is a convenience which creates an instance of the AssociateConnectionWithLagRequest.Builder avoiding the need to create one manually via AssociateConnectionWithLagRequest.builder()
  
  Parameters:
  
  associateConnectionWithLagRequest - A Consumer that will call methods on AssociateConnectionWithLagRequest.Builder to create a request.
  
  Returns:
  
  Result of the AssociateConnectionWithLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateHostedConnection
  default AssociateHostedConnectionResponse associateHostedConnection(AssociateHostedConnectionRequest associateHostedConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to Amazon Web Services as it is being migrated.
  
  Intended for use by Direct Connect Partners only.
  
  Parameters:
  
  associateHostedConnectionRequest -
  
  Returns:
  
  Result of the AssociateHostedConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateHostedConnection
  default AssociateHostedConnectionResponse associateHostedConnection(Consumer<AssociateHostedConnectionRequest.Builder> associateHostedConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to Amazon Web Services as it is being migrated.
  
  Intended for use by Direct Connect Partners only.
  
  This is a convenience which creates an instance of the AssociateHostedConnectionRequest.Builder avoiding the need to create one manually via AssociateHostedConnectionRequest.builder()
  
  Parameters:
  
  associateHostedConnectionRequest - A Consumer that will call methods on AssociateHostedConnectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the AssociateHostedConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateMacSecKey
  default AssociateMacSecKeyResponse associateMacSecKey(AssociateMacSecKeyRequest associateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.
  
  You must supply either the secretARN, or the CKN/CAK (ckn and cak) pair in the request.
  
  For information about MAC Security (MACsec) key considerations, see MACsec pre-shared CKN/CAK key considerations in the Direct Connect User Guide.
  
  Parameters:
  
  associateMacSecKeyRequest -
  
  Returns:
  
  Result of the AssociateMacSecKey operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateMacSecKey
  default AssociateMacSecKeyResponse associateMacSecKey(Consumer<AssociateMacSecKeyRequest.Builder> associateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates a MAC Security (MACsec) Connection Key Name (CKN)/ Connectivity Association Key (CAK) pair with an Direct Connect dedicated connection.
  
  You must supply either the secretARN, or the CKN/CAK (ckn and cak) pair in the request.
  
  For information about MAC Security (MACsec) key considerations, see MACsec pre-shared CKN/CAK key considerations in the Direct Connect User Guide.
  
  This is a convenience which creates an instance of the AssociateMacSecKeyRequest.Builder avoiding the need to create one manually via AssociateMacSecKeyRequest.builder()
  
  Parameters:
  
  associateMacSecKeyRequest - A Consumer that will call methods on AssociateMacSecKeyRequest.Builder to create a request.
  
  Returns:
  
  Result of the AssociateMacSecKey operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateVirtualInterface
  default AssociateVirtualInterfaceResponse associateVirtualInterface(AssociateVirtualInterfaceRequest associateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to Amazon Web Services is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.
  
  Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.
  
  To reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG for the association.
  
  Parameters:
  
  associateVirtualInterfaceRequest -
  
  Returns:
  
  Result of the AssociateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- associateVirtualInterface
  default AssociateVirtualInterfaceResponse associateVirtualInterface(Consumer<AssociateVirtualInterfaceRequest.Builder> associateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to Amazon Web Services is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.
  
  Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.
  
  To reassociate a virtual interface to a new connection or LAG, the requester must own either the virtual interface itself or the connection to which the virtual interface is currently associated. Additionally, the requester must own the connection or LAG for the association.
  
  This is a convenience which creates an instance of the AssociateVirtualInterfaceRequest.Builder avoiding the need to create one manually via AssociateVirtualInterfaceRequest.builder()
  
  Parameters:
  
  associateVirtualInterfaceRequest - A Consumer that will call methods on AssociateVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the AssociateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmConnection
  default ConfirmConnectionResponse confirmConnection(ConfirmConnectionRequest confirmConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Confirms the creation of the specified hosted connection on an interconnect.
  
  Upon creation, the hosted connection is initially in the Ordering state, and remains in this state until the owner confirms creation of the hosted connection.
  
  Parameters:
  
  confirmConnectionRequest -
  
  Returns:
  
  Result of the ConfirmConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmConnection
  default ConfirmConnectionResponse confirmConnection(Consumer<ConfirmConnectionRequest.Builder> confirmConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Confirms the creation of the specified hosted connection on an interconnect.
  
  Upon creation, the hosted connection is initially in the Ordering state, and remains in this state until the owner confirms creation of the hosted connection.
  
  This is a convenience which creates an instance of the ConfirmConnectionRequest.Builder avoiding the need to create one manually via ConfirmConnectionRequest.builder()
  
  Parameters:
  
  confirmConnectionRequest - A Consumer that will call methods on ConfirmConnectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the ConfirmConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmCustomerAgreement
  default ConfirmCustomerAgreementResponse confirmCustomerAgreement(ConfirmCustomerAgreementRequest confirmCustomerAgreementRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).
  
  Parameters:
  
  confirmCustomerAgreementRequest -
  
  Returns:
  
  Result of the ConfirmCustomerAgreement operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmCustomerAgreement
  default ConfirmCustomerAgreementResponse confirmCustomerAgreement(Consumer<ConfirmCustomerAgreementRequest.Builder> confirmCustomerAgreementRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  The confirmation of the terms of agreement when creating the connection/link aggregation group (LAG).
  
  This is a convenience which creates an instance of the ConfirmCustomerAgreementRequest.Builder avoiding the need to create one manually via ConfirmCustomerAgreementRequest.builder()
  
  Parameters:
  
  confirmCustomerAgreementRequest - A Consumer that will call methods on ConfirmCustomerAgreementRequest.Builder to create a request.
  
  Returns:
  
  Result of the ConfirmCustomerAgreement operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmPrivateVirtualInterface
  default ConfirmPrivateVirtualInterfaceResponse confirmPrivateVirtualInterface(ConfirmPrivateVirtualInterfaceRequest confirmPrivateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts ownership of a private virtual interface created by another Amazon Web Services account.
  
  After the virtual interface owner makes this call, the virtual interface is created and attached to the specified virtual private gateway or Direct Connect gateway, and is made available to handle traffic.
  
  Parameters:
  
  confirmPrivateVirtualInterfaceRequest -
  
  Returns:
  
  Result of the ConfirmPrivateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmPrivateVirtualInterface
  default ConfirmPrivateVirtualInterfaceResponse confirmPrivateVirtualInterface(Consumer<ConfirmPrivateVirtualInterfaceRequest.Builder> confirmPrivateVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts ownership of a private virtual interface created by another Amazon Web Services account.
  
  After the virtual interface owner makes this call, the virtual interface is created and attached to the specified virtual private gateway or Direct Connect gateway, and is made available to handle traffic.
  
  This is a convenience which creates an instance of the ConfirmPrivateVirtualInterfaceRequest.Builder avoiding the need to create one manually via ConfirmPrivateVirtualInterfaceRequest.builder()
  
  Parameters:
  
  confirmPrivateVirtualInterfaceRequest - A Consumer that will call methods on ConfirmPrivateVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the ConfirmPrivateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmPublicVirtualInterface
  default ConfirmPublicVirtualInterfaceResponse confirmPublicVirtualInterface(ConfirmPublicVirtualInterfaceRequest confirmPublicVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts ownership of a public virtual interface created by another Amazon Web Services account.
  
  After the virtual interface owner makes this call, the specified virtual interface is created and made available to handle traffic.
  
  Parameters:
  
  confirmPublicVirtualInterfaceRequest -
  
  Returns:
  
  Result of the ConfirmPublicVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmPublicVirtualInterface
  default ConfirmPublicVirtualInterfaceResponse confirmPublicVirtualInterface(Consumer<ConfirmPublicVirtualInterfaceRequest.Builder> confirmPublicVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts ownership of a public virtual interface created by another Amazon Web Services account.
  
  After the virtual interface owner makes this call, the specified virtual interface is created and made available to handle traffic.
  
  This is a convenience which creates an instance of the ConfirmPublicVirtualInterfaceRequest.Builder avoiding the need to create one manually via ConfirmPublicVirtualInterfaceRequest.builder()
  
  Parameters:
  
  confirmPublicVirtualInterfaceRequest - A Consumer that will call methods on ConfirmPublicVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the ConfirmPublicVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmTransitVirtualInterface
  default ConfirmTransitVirtualInterfaceResponse confirmTransitVirtualInterface(ConfirmTransitVirtualInterfaceRequest confirmTransitVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts ownership of a transit virtual interface created by another Amazon Web Services account.
  
  After the owner of the transit virtual interface makes this call, the specified transit virtual interface is created and made available to handle traffic.
  
  Parameters:
  
  confirmTransitVirtualInterfaceRequest -
  
  Returns:
  
  Result of the ConfirmTransitVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- confirmTransitVirtualInterface
  default ConfirmTransitVirtualInterfaceResponse confirmTransitVirtualInterface(Consumer<ConfirmTransitVirtualInterfaceRequest.Builder> confirmTransitVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Accepts ownership of a transit virtual interface created by another Amazon Web Services account.
  
  After the owner of the transit virtual interface makes this call, the specified transit virtual interface is created and made available to handle traffic.
  
  This is a convenience which creates an instance of the ConfirmTransitVirtualInterfaceRequest.Builder avoiding the need to create one manually via ConfirmTransitVirtualInterfaceRequest.builder()
  
  Parameters:
  
  confirmTransitVirtualInterfaceRequest - A Consumer that will call methods on ConfirmTransitVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the ConfirmTransitVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createBGPPeer
  default CreateBgpPeerResponse createBGPPeer(CreateBgpPeerRequest createBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a BGP peer on the specified virtual interface.
  
  You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access Amazon Web Services resources that also use that address family.
  
  If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.
  
  When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
  
  If you let Amazon Web Services auto-assign IPv4 addresses, a /30 CIDR will be allocated from 169.254.0.0/16. Amazon Web Services does not recommend this option if you intend to use the customer router peer IP address as the source and destination for traffic. Instead you should use RFC 1918 or other addressing, and specify the address yourself. For more information about RFC 1918 see Address Allocation for Private Internets.
  
  For a public virtual interface, the Autonomous System Number (ASN) must be private or already on the allow list for the virtual interface.
  
  Parameters:
  
  createBgpPeerRequest -
  
  Returns:
  
  Result of the CreateBGPPeer operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createBGPPeer
  default CreateBgpPeerResponse createBGPPeer(Consumer<CreateBgpPeerRequest.Builder> createBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a BGP peer on the specified virtual interface.
  
  You must create a BGP peer for the corresponding address family (IPv4/IPv6) in order to access Amazon Web Services resources that also use that address family.
  
  If logical redundancy is not supported by the connection, interconnect, or LAG, the BGP peer cannot be in the same address family as an existing BGP peer on the virtual interface.
  
  When creating a IPv6 BGP peer, omit the Amazon address and customer address. IPv6 addresses are automatically assigned from the Amazon pool of IPv6 addresses; you cannot specify custom IPv6 addresses.
  
  If you let Amazon Web Services auto-assign IPv4 addresses, a /30 CIDR will be allocated from 169.254.0.0/16. Amazon Web Services does not recommend this option if you intend to use the customer router peer IP address as the source and destination for traffic. Instead you should use RFC 1918 or other addressing, and specify the address yourself. For more information about RFC 1918 see Address Allocation for Private Internets.
  
  For a public virtual interface, the Autonomous System Number (ASN) must be private or already on the allow list for the virtual interface.
  
  This is a convenience which creates an instance of the CreateBgpPeerRequest.Builder avoiding the need to create one manually via CreateBgpPeerRequest.builder()
  
  Parameters:
  
  createBgpPeerRequest - A Consumer that will call methods on CreateBgpPeerRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateBGPPeer operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createConnection
  default CreateConnectionResponse createConnection(CreateConnectionRequest createConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a connection between a customer network and a specific Direct Connect location.
  
  A connection links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router.
  
  To find the locations for your Region, use DescribeLocations.
  
  You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection is created.
  
  Parameters:
  
  createConnectionRequest -
  
  Returns:
  
  Result of the CreateConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createConnection
  default CreateConnectionResponse createConnection(Consumer<CreateConnectionRequest.Builder> createConnectionRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a connection between a customer network and a specific Direct Connect location.
  
  A connection links your internal network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an Direct Connect router.
  
  To find the locations for your Region, use DescribeLocations.
  
  You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection is created.
  
  This is a convenience which creates an instance of the CreateConnectionRequest.Builder avoiding the need to create one manually via CreateConnectionRequest.builder()
  
  Parameters:
  
  createConnectionRequest - A Consumer that will call methods on CreateConnectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDirectConnectGateway
  default CreateDirectConnectGatewayResponse createDirectConnectGateway(CreateDirectConnectGatewayRequest createDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. A Direct Connect gateway is global and visible in any Amazon Web Services Region after it is created. The virtual interfaces and virtual private gateways that are connected through a Direct Connect gateway can be in different Amazon Web Services Regions. This enables you to connect to a VPC in any Region, regardless of the Region in which the virtual interfaces are located, and pass traffic between them.
  
  Parameters:
  
  createDirectConnectGatewayRequest -
  
  Returns:
  
  Result of the CreateDirectConnectGateway operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDirectConnectGateway
  default CreateDirectConnectGatewayResponse createDirectConnectGateway(Consumer<CreateDirectConnectGatewayRequest.Builder> createDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a Direct Connect gateway, which is an intermediate object that enables you to connect a set of virtual interfaces and virtual private gateways. A Direct Connect gateway is global and visible in any Amazon Web Services Region after it is created. The virtual interfaces and virtual private gateways that are connected through a Direct Connect gateway can be in different Amazon Web Services Regions. This enables you to connect to a VPC in any Region, regardless of the Region in which the virtual interfaces are located, and pass traffic between them.
  
  This is a convenience which creates an instance of the CreateDirectConnectGatewayRequest.Builder avoiding the need to create one manually via CreateDirectConnectGatewayRequest.builder()
  
  Parameters:
  
  createDirectConnectGatewayRequest - A Consumer that will call methods on CreateDirectConnectGatewayRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateDirectConnectGateway operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDirectConnectGatewayAssociation
  default CreateDirectConnectGatewayAssociationResponse createDirectConnectGatewayAssociation(CreateDirectConnectGatewayAssociationRequest createDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates an association between a Direct Connect gateway and a virtual private gateway. The virtual private gateway must be attached to a VPC and must not be associated with another Direct Connect gateway.
  
  Parameters:
  
  createDirectConnectGatewayAssociationRequest -
  
  Returns:
  
  Result of the CreateDirectConnectGatewayAssociation operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDirectConnectGatewayAssociation
  default CreateDirectConnectGatewayAssociationResponse createDirectConnectGatewayAssociation(Consumer<CreateDirectConnectGatewayAssociationRequest.Builder> createDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates an association between a Direct Connect gateway and a virtual private gateway. The virtual private gateway must be attached to a VPC and must not be associated with another Direct Connect gateway.
  
  This is a convenience which creates an instance of the CreateDirectConnectGatewayAssociationRequest.Builder avoiding the need to create one manually via CreateDirectConnectGatewayAssociationRequest.builder()
  
  Parameters:
  
  createDirectConnectGatewayAssociationRequest - A Consumer that will call methods on CreateDirectConnectGatewayAssociationRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateDirectConnectGatewayAssociation operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDirectConnectGatewayAssociationProposal
  default CreateDirectConnectGatewayAssociationProposalResponse createDirectConnectGatewayAssociationProposal(CreateDirectConnectGatewayAssociationProposalRequest createDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.
  
  You can associate a Direct Connect gateway and virtual private gateway or transit gateway that is owned by any Amazon Web Services account.
  
  Parameters:
  
  createDirectConnectGatewayAssociationProposalRequest -
  
  Returns:
  
  Result of the CreateDirectConnectGatewayAssociationProposal operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createDirectConnectGatewayAssociationProposal
  default CreateDirectConnectGatewayAssociationProposalResponse createDirectConnectGatewayAssociationProposal(Consumer<CreateDirectConnectGatewayAssociationProposalRequest.Builder> createDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a proposal to associate the specified virtual private gateway or transit gateway with the specified Direct Connect gateway.
  
  You can associate a Direct Connect gateway and virtual private gateway or transit gateway that is owned by any Amazon Web Services account.
  
  This is a convenience which creates an instance of the CreateDirectConnectGatewayAssociationProposalRequest.Builder avoiding the need to create one manually via CreateDirectConnectGatewayAssociationProposalRequest.builder()
  
  Parameters:
  
  createDirectConnectGatewayAssociationProposalRequest - A Consumer that will call methods on CreateDirectConnectGatewayAssociationProposalRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateDirectConnectGatewayAssociationProposal operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createInterconnect
  default CreateInterconnectResponse createInterconnect(CreateInterconnectRequest createInterconnectRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.
  
  An interconnect is a connection that is capable of hosting other connections. The Direct Connect Partner can use an interconnect to provide Direct Connect hosted connections to customers through their own network services. Like a standard connection, an interconnect links the partner's network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an Direct Connect router.
  
  You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect is created.
  
  For each end customer, the Direct Connect Partner provisions a connection on their interconnect by calling AllocateHostedConnection. The end customer can then connect to Amazon Web Services resources by creating a virtual interface on their connection, using the VLAN assigned to them by the Direct Connect Partner.
  
  Intended for use by Direct Connect Partners only.
  
  Parameters:
  
  createInterconnectRequest -
  
  Returns:
  
  Result of the CreateInterconnect operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createInterconnect
  default CreateInterconnectResponse createInterconnect(Consumer<CreateInterconnectRequest.Builder> createInterconnectRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates an interconnect between an Direct Connect Partner's network and a specific Direct Connect location.
  
  An interconnect is a connection that is capable of hosting other connections. The Direct Connect Partner can use an interconnect to provide Direct Connect hosted connections to customers through their own network services. Like a standard connection, an interconnect links the partner's network to an Direct Connect location over a standard Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an Direct Connect router.
  
  You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect is created.
  
  For each end customer, the Direct Connect Partner provisions a connection on their interconnect by calling AllocateHostedConnection. The end customer can then connect to Amazon Web Services resources by creating a virtual interface on their connection, using the VLAN assigned to them by the Direct Connect Partner.
  
  Intended for use by Direct Connect Partners only.
  
  This is a convenience which creates an instance of the CreateInterconnectRequest.Builder avoiding the need to create one manually via CreateInterconnectRequest.builder()
  
  Parameters:
  
  createInterconnectRequest - A Consumer that will call methods on CreateInterconnectRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateInterconnect operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createLag
  default CreateLagResponse createLag(CreateLagRequest createLagRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple interfaces, enabling you to treat them as a single interface.
  
  All connections in a LAG must use the same bandwidth (either 1Gbps, 10Gbps, 100Gbps, or 400Gbps) and must terminate at the same Direct Connect endpoint.
  
  You can have up to 10 dedicated connections per location. Regardless of this limit, if you request more connections for the LAG than Direct Connect can allocate on a single endpoint, no LAG is created..
  
  You can specify an existing physical dedicated connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical dedicated connection, and re-establishes them as a member of the LAG. The LAG will be created on the same Direct Connect endpoint to which the dedicated connection terminates. Any virtual interfaces associated with the dedicated connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.
  
  If the Amazon Web Services account used to create a LAG is a registered Direct Connect Partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.
  
  Parameters:
  
  createLagRequest -
  
  Returns:
  
  Result of the CreateLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createLag
  default CreateLagResponse createLag(Consumer<CreateLagRequest.Builder> createLagRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a link aggregation group (LAG) with the specified number of bundled physical dedicated connections between the customer network and a specific Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple interfaces, enabling you to treat them as a single interface.
  
  All connections in a LAG must use the same bandwidth (either 1Gbps, 10Gbps, 100Gbps, or 400Gbps) and must terminate at the same Direct Connect endpoint.
  
  You can have up to 10 dedicated connections per location. Regardless of this limit, if you request more connections for the LAG than Direct Connect can allocate on a single endpoint, no LAG is created..
  
  You can specify an existing physical dedicated connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical dedicated connection, and re-establishes them as a member of the LAG. The LAG will be created on the same Direct Connect endpoint to which the dedicated connection terminates. Any virtual interfaces associated with the dedicated connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.
  
  If the Amazon Web Services account used to create a LAG is a registered Direct Connect Partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.
  
  This is a convenience which creates an instance of the CreateLagRequest.Builder avoiding the need to create one manually via CreateLagRequest.builder()
  
  Parameters:
  
  createLagRequest - A Consumer that will call methods on CreateLagRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createPrivateVirtualInterface
  default CreatePrivateVirtualInterfaceResponse createPrivateVirtualInterface(CreatePrivateVirtualInterfaceRequest createPrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a private virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A private virtual interface can be connected to either a Direct Connect gateway or a Virtual Private Gateway (VGW). Connecting the private virtual interface to a Direct Connect gateway enables the possibility for connecting to multiple VPCs, including VPCs in different Amazon Web Services Regions. Connecting the private virtual interface to a VGW only provides access to a single VPC within the same Region.
  
  Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
  
  Parameters:
  
  createPrivateVirtualInterfaceRequest -
  
  Returns:
  
  Result of the CreatePrivateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createPrivateVirtualInterface
  default CreatePrivateVirtualInterfaceResponse createPrivateVirtualInterface(Consumer<CreatePrivateVirtualInterfaceRequest.Builder> createPrivateVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a private virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A private virtual interface can be connected to either a Direct Connect gateway or a Virtual Private Gateway (VGW). Connecting the private virtual interface to a Direct Connect gateway enables the possibility for connecting to multiple VPCs, including VPCs in different Amazon Web Services Regions. Connecting the private virtual interface to a VGW only provides access to a single VPC within the same Region.
  
  Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
  
  This is a convenience which creates an instance of the CreatePrivateVirtualInterfaceRequest.Builder avoiding the need to create one manually via CreatePrivateVirtualInterfaceRequest.builder()
  
  Parameters:
  
  createPrivateVirtualInterfaceRequest - A Consumer that will call methods on CreatePrivateVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreatePrivateVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createPublicVirtualInterface
  default CreatePublicVirtualInterfaceResponse createPublicVirtualInterface(CreatePublicVirtualInterfaceRequest createPublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a public virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A public virtual interface supports sending traffic to public services of Amazon Web Services such as Amazon S3.
  
  When creating an IPv6 public virtual interface (addressFamily is ipv6), leave the customer and amazon address fields blank to use auto-assigned IPv6 space. Custom IPv6 addresses are not supported.
  
  Parameters:
  
  createPublicVirtualInterfaceRequest -
  
  Returns:
  
  Result of the CreatePublicVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createPublicVirtualInterface
  default CreatePublicVirtualInterfaceResponse createPublicVirtualInterface(Consumer<CreatePublicVirtualInterfaceRequest.Builder> createPublicVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a public virtual interface. A virtual interface is the VLAN that transports Direct Connect traffic. A public virtual interface supports sending traffic to public services of Amazon Web Services such as Amazon S3.
  
  When creating an IPv6 public virtual interface (addressFamily is ipv6), leave the customer and amazon address fields blank to use auto-assigned IPv6 space. Custom IPv6 addresses are not supported.
  
  This is a convenience which creates an instance of the CreatePublicVirtualInterfaceRequest.Builder avoiding the need to create one manually via CreatePublicVirtualInterfaceRequest.builder()
  
  Parameters:
  
  createPublicVirtualInterfaceRequest - A Consumer that will call methods on CreatePublicVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreatePublicVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createTransitVirtualInterface
  default CreateTransitVirtualInterfaceResponse createTransitVirtualInterface(CreateTransitVirtualInterfaceRequest createTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a transit virtual interface. A transit virtual interface should be used to access one or more transit gateways associated with Direct Connect gateways. A transit virtual interface enables the connection of multiple VPCs attached to a transit gateway to a Direct Connect gateway.
  
  If you associate your transit gateway with one or more Direct Connect gateways, the Autonomous System Number (ASN) used by the transit gateway and the Direct Connect gateway must be different. For example, if you use the default ASN 64512 for both your the transit gateway and Direct Connect gateway, the association request fails.
  
  A jumbo MTU value must be either 1500 or 8500. No other values will be accepted. Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
  
  Parameters:
  
  createTransitVirtualInterfaceRequest -
  
  Returns:
  
  Result of the CreateTransitVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createTransitVirtualInterface
  default CreateTransitVirtualInterfaceResponse createTransitVirtualInterface(Consumer<CreateTransitVirtualInterfaceRequest.Builder> createTransitVirtualInterfaceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Creates a transit virtual interface. A transit virtual interface should be used to access one or more transit gateways associated with Direct Connect gateways. A transit virtual interface enables the connection of multiple VPCs attached to a transit gateway to a Direct Connect gateway.
  
  If you associate your transit gateway with one or more Direct Connect gateways, the Autonomous System Number (ASN) used by the transit gateway and the Direct Connect gateway must be different. For example, if you use the default ASN 64512 for both your the transit gateway and Direct Connect gateway, the association request fails.
  
  A jumbo MTU value must be either 1500 or 8500. No other values will be accepted. Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
  
  This is a convenience which creates an instance of the CreateTransitVirtualInterfaceRequest.Builder avoiding the need to create one manually via CreateTransitVirtualInterfaceRequest.builder()
  
  Parameters:
  
  createTransitVirtualInterfaceRequest - A Consumer that will call methods on CreateTransitVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateTransitVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteBGPPeer
  default DeleteBgpPeerResponse deleteBGPPeer(DeleteBgpPeerRequest deleteBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.
  
  You cannot delete the last BGP peer from a virtual interface.
  
  Parameters:
  
  deleteBgpPeerRequest -
  
  Returns:
  
  Result of the DeleteBGPPeer operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteBGPPeer
  default DeleteBgpPeerResponse deleteBGPPeer(Consumer<DeleteBgpPeerRequest.Builder> deleteBgpPeerRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified BGP peer on the specified virtual interface with the specified customer address and ASN.
  
  You cannot delete the last BGP peer from a virtual interface.
  
  This is a convenience which creates an instance of the DeleteBgpPeerRequest.Builder avoiding the need to create one manually via DeleteBgpPeerRequest.builder()
  
  Parameters:
  
  deleteBgpPeerRequest - A Consumer that will call methods on DeleteBgpPeerRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteBGPPeer operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteConnection
  default DeleteConnectionResponse deleteConnection(DeleteConnectionRequest deleteConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified connection.
  
  Deleting a connection only stops the Direct Connect port hour and data transfer charges. If you are partnering with any third parties to connect with the Direct Connect location, you must cancel your service with them separately.
  
  Parameters:
  
  deleteConnectionRequest -
  
  Returns:
  
  Result of the DeleteConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteConnection
  default DeleteConnectionResponse deleteConnection(Consumer<DeleteConnectionRequest.Builder> deleteConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified connection.
  
  Deleting a connection only stops the Direct Connect port hour and data transfer charges. If you are partnering with any third parties to connect with the Direct Connect location, you must cancel your service with them separately.
  
  This is a convenience which creates an instance of the DeleteConnectionRequest.Builder avoiding the need to create one manually via DeleteConnectionRequest.builder()
  
  Parameters:
  
  deleteConnectionRequest - A Consumer that will call methods on DeleteConnectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDirectConnectGateway
  default DeleteDirectConnectGatewayResponse deleteDirectConnectGateway(DeleteDirectConnectGatewayRequest deleteDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified Direct Connect gateway. You must first delete all virtual interfaces that are attached to the Direct Connect gateway and disassociate all virtual private gateways associated with the Direct Connect gateway.
  
  Parameters:
  
  deleteDirectConnectGatewayRequest -
  
  Returns:
  
  Result of the DeleteDirectConnectGateway operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDirectConnectGateway
  default DeleteDirectConnectGatewayResponse deleteDirectConnectGateway(Consumer<DeleteDirectConnectGatewayRequest.Builder> deleteDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified Direct Connect gateway. You must first delete all virtual interfaces that are attached to the Direct Connect gateway and disassociate all virtual private gateways associated with the Direct Connect gateway.
  
  This is a convenience which creates an instance of the DeleteDirectConnectGatewayRequest.Builder avoiding the need to create one manually via DeleteDirectConnectGatewayRequest.builder()
  
  Parameters:
  
  deleteDirectConnectGatewayRequest - A Consumer that will call methods on DeleteDirectConnectGatewayRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteDirectConnectGateway operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDirectConnectGatewayAssociation
  default DeleteDirectConnectGatewayAssociationResponse deleteDirectConnectGatewayAssociation(DeleteDirectConnectGatewayAssociationRequest deleteDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the association between the specified Direct Connect gateway and virtual private gateway.
  
  We recommend that you specify the associationID to delete the association. Alternatively, if you own virtual gateway and a Direct Connect gateway association, you can specify the virtualGatewayId and directConnectGatewayId to delete an association.
  
  Parameters:
  
  deleteDirectConnectGatewayAssociationRequest -
  
  Returns:
  
  Result of the DeleteDirectConnectGatewayAssociation operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDirectConnectGatewayAssociation
  default DeleteDirectConnectGatewayAssociationResponse deleteDirectConnectGatewayAssociation(Consumer<DeleteDirectConnectGatewayAssociationRequest.Builder> deleteDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the association between the specified Direct Connect gateway and virtual private gateway.
  
  We recommend that you specify the associationID to delete the association. Alternatively, if you own virtual gateway and a Direct Connect gateway association, you can specify the virtualGatewayId and directConnectGatewayId to delete an association.
  
  This is a convenience which creates an instance of the DeleteDirectConnectGatewayAssociationRequest.Builder avoiding the need to create one manually via DeleteDirectConnectGatewayAssociationRequest.builder()
  
  Parameters:
  
  deleteDirectConnectGatewayAssociationRequest - A Consumer that will call methods on DeleteDirectConnectGatewayAssociationRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteDirectConnectGatewayAssociation operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDirectConnectGatewayAssociationProposal
  default DeleteDirectConnectGatewayAssociationProposalResponse deleteDirectConnectGatewayAssociationProposal(DeleteDirectConnectGatewayAssociationProposalRequest deleteDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.
  
  Parameters:
  
  deleteDirectConnectGatewayAssociationProposalRequest -
  
  Returns:
  
  Result of the DeleteDirectConnectGatewayAssociationProposal operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteDirectConnectGatewayAssociationProposal
  default DeleteDirectConnectGatewayAssociationProposalResponse deleteDirectConnectGatewayAssociationProposal(Consumer<DeleteDirectConnectGatewayAssociationProposalRequest.Builder> deleteDirectConnectGatewayAssociationProposalRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the association proposal request between the specified Direct Connect gateway and virtual private gateway or transit gateway.
  
  This is a convenience which creates an instance of the DeleteDirectConnectGatewayAssociationProposalRequest.Builder avoiding the need to create one manually via DeleteDirectConnectGatewayAssociationProposalRequest.builder()
  
  Parameters:
  
  deleteDirectConnectGatewayAssociationProposalRequest - A Consumer that will call methods on DeleteDirectConnectGatewayAssociationProposalRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteDirectConnectGatewayAssociationProposal operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteInterconnect
  default DeleteInterconnectResponse deleteInterconnect(DeleteInterconnectRequest deleteInterconnectRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified interconnect.
  
  Intended for use by Direct Connect Partners only.
  
  Parameters:
  
  deleteInterconnectRequest -
  
  Returns:
  
  Result of the DeleteInterconnect operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteInterconnect
  default DeleteInterconnectResponse deleteInterconnect(Consumer<DeleteInterconnectRequest.Builder> deleteInterconnectRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified interconnect.
  
  Intended for use by Direct Connect Partners only.
  
  This is a convenience which creates an instance of the DeleteInterconnectRequest.Builder avoiding the need to create one manually via DeleteInterconnectRequest.builder()
  
  Parameters:
  
  deleteInterconnectRequest - A Consumer that will call methods on DeleteInterconnectRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteInterconnect operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteLag
  default DeleteLagResponse deleteLag(DeleteLagRequest deleteLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.
  
  Parameters:
  
  deleteLagRequest -
  
  Returns:
  
  Result of the DeleteLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteLag
  default DeleteLagResponse deleteLag(Consumer<DeleteLagRequest.Builder> deleteLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes the specified link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.
  
  This is a convenience which creates an instance of the DeleteLagRequest.Builder avoiding the need to create one manually via DeleteLagRequest.builder()
  
  Parameters:
  
  deleteLagRequest - A Consumer that will call methods on DeleteLagRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteVirtualInterface
  default DeleteVirtualInterfaceResponse deleteVirtualInterface(DeleteVirtualInterfaceRequest deleteVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes a virtual interface.
  
  Parameters:
  
  deleteVirtualInterfaceRequest -
  
  Returns:
  
  Result of the DeleteVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteVirtualInterface
  default DeleteVirtualInterfaceResponse deleteVirtualInterface(Consumer<DeleteVirtualInterfaceRequest.Builder> deleteVirtualInterfaceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deletes a virtual interface.
  
  This is a convenience which creates an instance of the DeleteVirtualInterfaceRequest.Builder avoiding the need to create one manually via DeleteVirtualInterfaceRequest.builder()
  
  Parameters:
  
  deleteVirtualInterfaceRequest - A Consumer that will call methods on DeleteVirtualInterfaceRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteVirtualInterface operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeConnections
  default DescribeConnectionsResponse describeConnections(DescribeConnectionsRequest describeConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Displays the specified connection or all connections in this Region.
  
  Parameters:
  
  describeConnectionsRequest -
  
  Returns:
  
  Result of the DescribeConnections operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeConnections
  default DescribeConnectionsResponse describeConnections(Consumer<DescribeConnectionsRequest.Builder> describeConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Displays the specified connection or all connections in this Region.
  
  This is a convenience which creates an instance of the DescribeConnectionsRequest.Builder avoiding the need to create one manually via DescribeConnectionsRequest.builder()
  
  Parameters:
  
  describeConnectionsRequest - A Consumer that will call methods on DescribeConnectionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeConnections operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeConnections
  default DescribeConnectionsResponse describeConnections() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Displays the specified connection or all connections in this Region.
  
  Returns:
  
  Result of the DescribeConnections operation returned by the service.
  
  See Also:
  
  describeConnections(DescribeConnectionsRequest)
  
  AWS API Documentation
- describeCustomerMetadata
  default DescribeCustomerMetadataResponse describeCustomerMetadata(DescribeCustomerMetadataRequest describeCustomerMetadataRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.
  
  Parameters:
  
  describeCustomerMetadataRequest -
  
  Returns:
  
  Result of the DescribeCustomerMetadata operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeCustomerMetadata
  default DescribeCustomerMetadataResponse describeCustomerMetadata(Consumer<DescribeCustomerMetadataRequest.Builder> describeCustomerMetadataRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Get and view a list of customer agreements, along with their signed status and whether the customer is an NNIPartner, NNIPartnerV2, or a nonPartner.
  
  This is a convenience which creates an instance of the DescribeCustomerMetadataRequest.Builder avoiding the need to create one manually via DescribeCustomerMetadataRequest.builder()
  
  Parameters:
  
  describeCustomerMetadataRequest - A Consumer that will call methods on DescribeCustomerMetadataRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeCustomerMetadata operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGatewayAssociationProposals
  default DescribeDirectConnectGatewayAssociationProposalsResponse describeDirectConnectGatewayAssociationProposals(DescribeDirectConnectGatewayAssociationProposalsRequest describeDirectConnectGatewayAssociationProposalsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.
  
  Parameters:
  
  describeDirectConnectGatewayAssociationProposalsRequest -
  
  Returns:
  
  Result of the DescribeDirectConnectGatewayAssociationProposals operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGatewayAssociationProposals
  default DescribeDirectConnectGatewayAssociationProposalsResponse describeDirectConnectGatewayAssociationProposals(Consumer<DescribeDirectConnectGatewayAssociationProposalsRequest.Builder> describeDirectConnectGatewayAssociationProposalsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Describes one or more association proposals for connection between a virtual private gateway or transit gateway and a Direct Connect gateway.
  
  This is a convenience which creates an instance of the DescribeDirectConnectGatewayAssociationProposalsRequest.Builder avoiding the need to create one manually via DescribeDirectConnectGatewayAssociationProposalsRequest.builder()
  
  Parameters:
  
  describeDirectConnectGatewayAssociationProposalsRequest - A Consumer that will call methods on DescribeDirectConnectGatewayAssociationProposalsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeDirectConnectGatewayAssociationProposals operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGatewayAssociations
  default DescribeDirectConnectGatewayAssociationsResponse describeDirectConnectGatewayAssociations(DescribeDirectConnectGatewayAssociationsRequest describeDirectConnectGatewayAssociationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways. You must specify one of the following:
  
  A Direct Connect gateway
  
  The response contains all virtual private gateways and transit gateways associated with the Direct Connect gateway.
  
  A virtual private gateway
  
  The response contains the Direct Connect gateway.
  
  A transit gateway
  
  The response contains the Direct Connect gateway.
  
  A Direct Connect gateway and a virtual private gateway
  
  The response contains the association between the Direct Connect gateway and virtual private gateway.
  
  A Direct Connect gateway and a transit gateway
  
  The response contains the association between the Direct Connect gateway and transit gateway.
  
  Parameters:
  
  describeDirectConnectGatewayAssociationsRequest -
  
  Returns:
  
  Result of the DescribeDirectConnectGatewayAssociations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGatewayAssociations
  default DescribeDirectConnectGatewayAssociationsResponse describeDirectConnectGatewayAssociations(Consumer<DescribeDirectConnectGatewayAssociationsRequest.Builder> describeDirectConnectGatewayAssociationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the associations between your Direct Connect gateways and virtual private gateways and transit gateways. You must specify one of the following:
  
  A Direct Connect gateway
  
  The response contains all virtual private gateways and transit gateways associated with the Direct Connect gateway.
  
  A virtual private gateway
  
  The response contains the Direct Connect gateway.
  
  A transit gateway
  
  The response contains the Direct Connect gateway.
  
  A Direct Connect gateway and a virtual private gateway
  
  The response contains the association between the Direct Connect gateway and virtual private gateway.
  
  A Direct Connect gateway and a transit gateway
  
  The response contains the association between the Direct Connect gateway and transit gateway.
  
  This is a convenience which creates an instance of the DescribeDirectConnectGatewayAssociationsRequest.Builder avoiding the need to create one manually via DescribeDirectConnectGatewayAssociationsRequest.builder()
  
  Parameters:
  
  describeDirectConnectGatewayAssociationsRequest - A Consumer that will call methods on DescribeDirectConnectGatewayAssociationsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeDirectConnectGatewayAssociations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGatewayAttachments
  default DescribeDirectConnectGatewayAttachmentsResponse describeDirectConnectGatewayAttachments(DescribeDirectConnectGatewayAttachmentsRequest describeDirectConnectGatewayAttachmentsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the attachments between your Direct Connect gateways and virtual interfaces. You must specify a Direct Connect gateway, a virtual interface, or both. If you specify a Direct Connect gateway, the response contains all virtual interfaces attached to the Direct Connect gateway. If you specify a virtual interface, the response contains all Direct Connect gateways attached to the virtual interface. If you specify both, the response contains the attachment between the Direct Connect gateway and the virtual interface.
  
  Parameters:
  
  describeDirectConnectGatewayAttachmentsRequest -
  
  Returns:
  
  Result of the DescribeDirectConnectGatewayAttachments operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGatewayAttachments
  default DescribeDirectConnectGatewayAttachmentsResponse describeDirectConnectGatewayAttachments(Consumer<DescribeDirectConnectGatewayAttachmentsRequest.Builder> describeDirectConnectGatewayAttachmentsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the attachments between your Direct Connect gateways and virtual interfaces. You must specify a Direct Connect gateway, a virtual interface, or both. If you specify a Direct Connect gateway, the response contains all virtual interfaces attached to the Direct Connect gateway. If you specify a virtual interface, the response contains all Direct Connect gateways attached to the virtual interface. If you specify both, the response contains the attachment between the Direct Connect gateway and the virtual interface.
  
  This is a convenience which creates an instance of the DescribeDirectConnectGatewayAttachmentsRequest.Builder avoiding the need to create one manually via DescribeDirectConnectGatewayAttachmentsRequest.builder()
  
  Parameters:
  
  describeDirectConnectGatewayAttachmentsRequest - A Consumer that will call methods on DescribeDirectConnectGatewayAttachmentsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeDirectConnectGatewayAttachments operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGateways
  default DescribeDirectConnectGatewaysResponse describeDirectConnectGateways(DescribeDirectConnectGatewaysRequest describeDirectConnectGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.
  
  Parameters:
  
  describeDirectConnectGatewaysRequest -
  
  Returns:
  
  Result of the DescribeDirectConnectGateways operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGateways
  default DescribeDirectConnectGatewaysResponse describeDirectConnectGateways(Consumer<DescribeDirectConnectGatewaysRequest.Builder> describeDirectConnectGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.
  
  This is a convenience which creates an instance of the DescribeDirectConnectGatewaysRequest.Builder avoiding the need to create one manually via DescribeDirectConnectGatewaysRequest.builder()
  
  Parameters:
  
  describeDirectConnectGatewaysRequest - A Consumer that will call methods on DescribeDirectConnectGatewaysRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeDirectConnectGateways operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeDirectConnectGateways
  default DescribeDirectConnectGatewaysResponse describeDirectConnectGateways() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists all your Direct Connect gateways or only the specified Direct Connect gateway. Deleted Direct Connect gateways are not returned.
  
  Returns:
  
  Result of the DescribeDirectConnectGateways operation returned by the service.
  
  See Also:
  
  describeDirectConnectGateways(DescribeDirectConnectGatewaysRequest)
  
  AWS API Documentation
- describeHostedConnections
  default DescribeHostedConnectionsResponse describeHostedConnections(DescribeHostedConnectionsRequest describeHostedConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).
  
  Intended for use by Direct Connect Partners only.
  
  Parameters:
  
  describeHostedConnectionsRequest -
  
  Returns:
  
  Result of the DescribeHostedConnections operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeHostedConnections
  default DescribeHostedConnectionsResponse describeHostedConnections(Consumer<DescribeHostedConnectionsRequest.Builder> describeHostedConnectionsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the hosted connections that have been provisioned on the specified interconnect or link aggregation group (LAG).
  
  Intended for use by Direct Connect Partners only.
  
  This is a convenience which creates an instance of the DescribeHostedConnectionsRequest.Builder avoiding the need to create one manually via DescribeHostedConnectionsRequest.builder()
  
  Parameters:
  
  describeHostedConnectionsRequest - A Consumer that will call methods on DescribeHostedConnectionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeHostedConnections operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeInterconnects
  default DescribeInterconnectsResponse describeInterconnects(DescribeInterconnectsRequest describeInterconnectsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.
  
  Parameters:
  
  describeInterconnectsRequest -
  
  Returns:
  
  Result of the DescribeInterconnects operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeInterconnects
  default DescribeInterconnectsResponse describeInterconnects(Consumer<DescribeInterconnectsRequest.Builder> describeInterconnectsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.
  
  This is a convenience which creates an instance of the DescribeInterconnectsRequest.Builder avoiding the need to create one manually via DescribeInterconnectsRequest.builder()
  
  Parameters:
  
  describeInterconnectsRequest - A Consumer that will call methods on DescribeInterconnectsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeInterconnects operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeInterconnects
  default DescribeInterconnectsResponse describeInterconnects() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the interconnects owned by the Amazon Web Services account or only the specified interconnect.
  
  Returns:
  
  Result of the DescribeInterconnects operation returned by the service.
  
  See Also:
  
  describeInterconnects(DescribeInterconnectsRequest)
  
  AWS API Documentation
- describeLags
  default DescribeLagsResponse describeLags(DescribeLagsRequest describeLagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Describes all your link aggregation groups (LAG) or the specified LAG.
  
  Parameters:
  
  describeLagsRequest -
  
  Returns:
  
  Result of the DescribeLags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLags
  default DescribeLagsResponse describeLags(Consumer<DescribeLagsRequest.Builder> describeLagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Describes all your link aggregation groups (LAG) or the specified LAG.
  
  This is a convenience which creates an instance of the DescribeLagsRequest.Builder avoiding the need to create one manually via DescribeLagsRequest.builder()
  
  Parameters:
  
  describeLagsRequest - A Consumer that will call methods on DescribeLagsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLags
  default DescribeLagsResponse describeLags() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Describes all your link aggregation groups (LAG) or the specified LAG.
  
  Returns:
  
  Result of the DescribeLags operation returned by the service.
  
  See Also:
  
  describeLags(DescribeLagsRequest)
  
  AWS API Documentation
- describeLoa
  default DescribeLoaResponse describeLoa(DescribeLoaRequest describeLoaRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
  
  The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see Requesting Cross Connects at Direct Connect Locations in the Direct Connect User Guide.
  
  Parameters:
  
  describeLoaRequest -
  
  Returns:
  
  Result of the DescribeLoa operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLoa
  default DescribeLoaResponse describeLoa(Consumer<DescribeLoaRequest.Builder> describeLoaRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Gets the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
  
  The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to Amazon Web Services at the colocation facility. For more information, see Requesting Cross Connects at Direct Connect Locations in the Direct Connect User Guide.
  
  This is a convenience which creates an instance of the DescribeLoaRequest.Builder avoiding the need to create one manually via DescribeLoaRequest.builder()
  
  Parameters:
  
  describeLoaRequest - A Consumer that will call methods on DescribeLoaRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLoa operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLocations
  default DescribeLocationsResponse describeLocations(DescribeLocationsRequest describeLocationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.
  
  Parameters:
  
  describeLocationsRequest -
  
  Returns:
  
  Result of the DescribeLocations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLocations
  default DescribeLocationsResponse describeLocations(Consumer<DescribeLocationsRequest.Builder> describeLocationsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.
  
  This is a convenience which creates an instance of the DescribeLocationsRequest.Builder avoiding the need to create one manually via DescribeLocationsRequest.builder()
  
  Parameters:
  
  describeLocationsRequest - A Consumer that will call methods on DescribeLocationsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLocations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLocations
  default DescribeLocationsResponse describeLocations() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the Direct Connect locations in the current Amazon Web Services Region. These are the locations that can be selected when calling CreateConnection or CreateInterconnect.
  
  Returns:
  
  Result of the DescribeLocations operation returned by the service.
  
  See Also:
  
  describeLocations(DescribeLocationsRequest)
  
  AWS API Documentation
- describeRouterConfiguration
  default DescribeRouterConfigurationResponse describeRouterConfiguration(DescribeRouterConfigurationRequest describeRouterConfigurationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Details about the router.
  
  Parameters:
  
  describeRouterConfigurationRequest - Provides the details about a virtual interface's router.
  
  Returns:
  
  Result of the DescribeRouterConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeRouterConfiguration
  default DescribeRouterConfigurationResponse describeRouterConfiguration(Consumer<DescribeRouterConfigurationRequest.Builder> describeRouterConfigurationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Details about the router.
  
  This is a convenience which creates an instance of the DescribeRouterConfigurationRequest.Builder avoiding the need to create one manually via DescribeRouterConfigurationRequest.builder()
  
  Parameters:
  
  describeRouterConfigurationRequest - A Consumer that will call methods on DescribeRouterConfigurationRequest.Builder to create a request. Provides the details about a virtual interface's router.
  
  Returns:
  
  Result of the DescribeRouterConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTags
  default DescribeTagsResponse describeTags(DescribeTagsRequest describeTagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Describes the tags associated with the specified Direct Connect resources.
  
  Parameters:
  
  describeTagsRequest -
  
  Returns:
  
  Result of the DescribeTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTags
  default DescribeTagsResponse describeTags(Consumer<DescribeTagsRequest.Builder> describeTagsRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Describes the tags associated with the specified Direct Connect resources.
  
  This is a convenience which creates an instance of the DescribeTagsRequest.Builder avoiding the need to create one manually via DescribeTagsRequest.builder()
  
  Parameters:
  
  describeTagsRequest - A Consumer that will call methods on DescribeTagsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeVirtualGateways
  default DescribeVirtualGatewaysResponse describeVirtualGateways(DescribeVirtualGatewaysRequest describeVirtualGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deprecated. Use DescribeVpnGateways instead. See DescribeVPNGateways in the Amazon Elastic Compute Cloud API Reference.
  
  Lists the virtual private gateways owned by the Amazon Web Services account.
  
  You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.
  
  Parameters:
  
  describeVirtualGatewaysRequest -
  
  Returns:
  
  Result of the DescribeVirtualGateways operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeVirtualGateways
  default DescribeVirtualGatewaysResponse describeVirtualGateways(Consumer<DescribeVirtualGatewaysRequest.Builder> describeVirtualGatewaysRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deprecated. Use DescribeVpnGateways instead. See DescribeVPNGateways in the Amazon Elastic Compute Cloud API Reference.
  
  Lists the virtual private gateways owned by the Amazon Web Services account.
  
  You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.
  
  This is a convenience which creates an instance of the DescribeVirtualGatewaysRequest.Builder avoiding the need to create one manually via DescribeVirtualGatewaysRequest.builder()
  
  Parameters:
  
  describeVirtualGatewaysRequest - A Consumer that will call methods on DescribeVirtualGatewaysRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeVirtualGateways operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeVirtualGateways
  default DescribeVirtualGatewaysResponse describeVirtualGateways() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Deprecated. Use DescribeVpnGateways instead. See DescribeVPNGateways in the Amazon Elastic Compute Cloud API Reference.
  
  Lists the virtual private gateways owned by the Amazon Web Services account.
  
  You can create one or more Direct Connect private virtual interfaces linked to a virtual private gateway.
  
  Returns:
  
  Result of the DescribeVirtualGateways operation returned by the service.
  
  See Also:
  
  describeVirtualGateways(DescribeVirtualGatewaysRequest)
  
  AWS API Documentation
- describeVirtualInterfaces
  default DescribeVirtualInterfacesResponse describeVirtualInterfaces(DescribeVirtualInterfacesRequest describeVirtualInterfacesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Displays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
  
  A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.
  
  Parameters:
  
  describeVirtualInterfacesRequest -
  
  Returns:
  
  Result of the DescribeVirtualInterfaces operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeVirtualInterfaces
  default DescribeVirtualInterfacesResponse describeVirtualInterfaces(Consumer<DescribeVirtualInterfacesRequest.Builder> describeVirtualInterfacesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Displays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
  
  A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.
  
  This is a convenience which creates an instance of the DescribeVirtualInterfacesRequest.Builder avoiding the need to create one manually via DescribeVirtualInterfacesRequest.builder()
  
  Parameters:
  
  describeVirtualInterfacesRequest - A Consumer that will call methods on DescribeVirtualInterfacesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeVirtualInterfaces operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeVirtualInterfaces
  default DescribeVirtualInterfacesResponse describeVirtualInterfaces() throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Displays all virtual interfaces for an Amazon Web Services account. Virtual interfaces deleted fewer than 15 minutes before you make the request are also returned. If you specify a connection ID, only the virtual interfaces associated with the connection are returned. If you specify a virtual interface ID, then only a single virtual interface is returned.
  
  A virtual interface (VLAN) transmits the traffic between the Direct Connect location and the customer network.
  
  Returns:
  
  Result of the DescribeVirtualInterfaces operation returned by the service.
  
  See Also:
  
  describeVirtualInterfaces(DescribeVirtualInterfacesRequest)
  
  AWS API Documentation
- disassociateConnectionFromLag
  default DisassociateConnectionFromLagResponse disassociateConnectionFromLag(DisassociateConnectionFromLagRequest disassociateConnectionFromLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an Direct Connect Partner is automatically converted to an interconnect.
  
  If disassociating the connection would cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
  
  Parameters:
  
  disassociateConnectionFromLagRequest -
  
  Returns:
  
  Result of the DisassociateConnectionFromLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- disassociateConnectionFromLag
  default DisassociateConnectionFromLagResponse disassociateConnectionFromLag(Consumer<DisassociateConnectionFromLagRequest.Builder> disassociateConnectionFromLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an Direct Connect Partner is automatically converted to an interconnect.
  
  If disassociating the connection would cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
  
  This is a convenience which creates an instance of the DisassociateConnectionFromLagRequest.Builder avoiding the need to create one manually via DisassociateConnectionFromLagRequest.builder()
  
  Parameters:
  
  disassociateConnectionFromLagRequest - A Consumer that will call methods on DisassociateConnectionFromLagRequest.Builder to create a request.
  
  Returns:
  
  Result of the DisassociateConnectionFromLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- disassociateMacSecKey
  default DisassociateMacSecKeyResponse disassociateMacSecKey(DisassociateMacSecKeyRequest disassociateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.
  
  Parameters:
  
  disassociateMacSecKeyRequest -
  
  Returns:
  
  Result of the DisassociateMacSecKey operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- disassociateMacSecKey
  default DisassociateMacSecKeyResponse disassociateMacSecKey(Consumer<DisassociateMacSecKeyRequest.Builder> disassociateMacSecKeyRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Removes the association between a MAC Security (MACsec) security key and an Direct Connect dedicated connection.
  
  This is a convenience which creates an instance of the DisassociateMacSecKeyRequest.Builder avoiding the need to create one manually via DisassociateMacSecKeyRequest.builder()
  
  Parameters:
  
  disassociateMacSecKeyRequest - A Consumer that will call methods on DisassociateMacSecKeyRequest.Builder to create a request.
  
  Returns:
  
  Result of the DisassociateMacSecKey operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listVirtualInterfaceTestHistory
  default ListVirtualInterfaceTestHistoryResponse listVirtualInterfaceTestHistory(ListVirtualInterfaceTestHistoryRequest listVirtualInterfaceTestHistoryRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the virtual interface failover test history.
  
  Parameters:
  
  listVirtualInterfaceTestHistoryRequest -
  
  Returns:
  
  Result of the ListVirtualInterfaceTestHistory operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- listVirtualInterfaceTestHistory
  default ListVirtualInterfaceTestHistoryResponse listVirtualInterfaceTestHistory(Consumer<ListVirtualInterfaceTestHistoryRequest.Builder> listVirtualInterfaceTestHistoryRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Lists the virtual interface failover test history.
  
  This is a convenience which creates an instance of the ListVirtualInterfaceTestHistoryRequest.Builder avoiding the need to create one manually via ListVirtualInterfaceTestHistoryRequest.builder()
  
  Parameters:
  
  listVirtualInterfaceTestHistoryRequest - A Consumer that will call methods on ListVirtualInterfaceTestHistoryRequest.Builder to create a request.
  
  Returns:
  
  Result of the ListVirtualInterfaceTestHistory operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startBgpFailoverTest
  default StartBgpFailoverTestResponse startBgpFailoverTest(StartBgpFailoverTestRequest startBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state. You can then send traffic to verify that there are no outages.
  
  You can run the test on public, private, transit, and hosted virtual interfaces.
  
  You can use ListVirtualInterfaceTestHistory to view the virtual interface test history.
  
  If you need to stop the test before the test interval completes, use StopBgpFailoverTest.
  
  Parameters:
  
  startBgpFailoverTestRequest -
  
  Returns:
  
  Result of the StartBgpFailoverTest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startBgpFailoverTest
  default StartBgpFailoverTestResponse startBgpFailoverTest(Consumer<StartBgpFailoverTestRequest.Builder> startBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Starts the virtual interface failover test that verifies your configuration meets your resiliency requirements by placing the BGP peering session in the DOWN state. You can then send traffic to verify that there are no outages.
  
  You can run the test on public, private, transit, and hosted virtual interfaces.
  
  You can use ListVirtualInterfaceTestHistory to view the virtual interface test history.
  
  If you need to stop the test before the test interval completes, use StopBgpFailoverTest.
  
  This is a convenience which creates an instance of the StartBgpFailoverTestRequest.Builder avoiding the need to create one manually via StartBgpFailoverTestRequest.builder()
  
  Parameters:
  
  startBgpFailoverTestRequest - A Consumer that will call methods on StartBgpFailoverTestRequest.Builder to create a request.
  
  Returns:
  
  Result of the StartBgpFailoverTest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- stopBgpFailoverTest
  default StopBgpFailoverTestResponse stopBgpFailoverTest(StopBgpFailoverTestRequest stopBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Stops the virtual interface failover test.
  
  Parameters:
  
  stopBgpFailoverTestRequest -
  
  Returns:
  
  Result of the StopBgpFailoverTest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- stopBgpFailoverTest
  default StopBgpFailoverTestResponse stopBgpFailoverTest(Consumer<StopBgpFailoverTestRequest.Builder> stopBgpFailoverTestRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Stops the virtual interface failover test.
  
  This is a convenience which creates an instance of the StopBgpFailoverTestRequest.Builder avoiding the need to create one manually via StopBgpFailoverTestRequest.builder()
  
  Parameters:
  
  stopBgpFailoverTestRequest - A Consumer that will call methods on StopBgpFailoverTestRequest.Builder to create a request.
  
  Returns:
  
  Result of the StopBgpFailoverTest operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- tagResource
  default TagResourceResponse tagResource(TagResourceRequest tagResourceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Adds the specified tags to the specified Direct Connect resource. Each resource can have a maximum of 50 tags.
  
  Each tag consists of a key and an optional value. If a tag with the same key is already associated with the resource, this action updates its value.
  
  Parameters:
  
  tagResourceRequest -
  
  Returns:
  
  Result of the TagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- tagResource
  default TagResourceResponse tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest) throws DuplicateTagKeysException, TooManyTagsException, DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Adds the specified tags to the specified Direct Connect resource. Each resource can have a maximum of 50 tags.
  
  Each tag consists of a key and an optional value. If a tag with the same key is already associated with the resource, this action updates its value.
  
  This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()
  
  Parameters:
  
  tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the TagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- untagResource
  default UntagResourceResponse untagResource(UntagResourceRequest untagResourceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Removes one or more tags from the specified Direct Connect resource.
  
  Parameters:
  
  untagResourceRequest -
  
  Returns:
  
  Result of the UntagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- untagResource
  default UntagResourceResponse untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Removes one or more tags from the specified Direct Connect resource.
  
  This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()
  
  Parameters:
  
  untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
  
  Returns:
  
  Result of the UntagResource operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateConnection
  default UpdateConnectionResponse updateConnection(UpdateConnectionRequest updateConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the Direct Connect dedicated connection configuration.
  
  You can update the following parameters for a connection:
  
  The connection name
  
  The connection's MAC Security (MACsec) encryption mode.
  
  Parameters:
  
  updateConnectionRequest -
  
  Returns:
  
  Result of the UpdateConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateConnection
  default UpdateConnectionResponse updateConnection(Consumer<UpdateConnectionRequest.Builder> updateConnectionRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the Direct Connect dedicated connection configuration.
  
  You can update the following parameters for a connection:
  
  The connection name
  
  The connection's MAC Security (MACsec) encryption mode.
  
  This is a convenience which creates an instance of the UpdateConnectionRequest.Builder avoiding the need to create one manually via UpdateConnectionRequest.builder()
  
  Parameters:
  
  updateConnectionRequest - A Consumer that will call methods on UpdateConnectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateConnection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDirectConnectGateway
  default UpdateDirectConnectGatewayResponse updateDirectConnectGateway(UpdateDirectConnectGatewayRequest updateDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the name of a current Direct Connect gateway.
  
  Parameters:
  
  updateDirectConnectGatewayRequest -
  
  Returns:
  
  Result of the UpdateDirectConnectGateway operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDirectConnectGateway
  default UpdateDirectConnectGatewayResponse updateDirectConnectGateway(Consumer<UpdateDirectConnectGatewayRequest.Builder> updateDirectConnectGatewayRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the name of a current Direct Connect gateway.
  
  This is a convenience which creates an instance of the UpdateDirectConnectGatewayRequest.Builder avoiding the need to create one manually via UpdateDirectConnectGatewayRequest.builder()
  
  Parameters:
  
  updateDirectConnectGatewayRequest - A Consumer that will call methods on UpdateDirectConnectGatewayRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateDirectConnectGateway operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDirectConnectGatewayAssociation
  default UpdateDirectConnectGatewayAssociationResponse updateDirectConnectGatewayAssociation(UpdateDirectConnectGatewayAssociationRequest updateDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the specified attributes of the Direct Connect gateway association.
  
  Add or remove prefixes from the association.
  
  Parameters:
  
  updateDirectConnectGatewayAssociationRequest -
  
  Returns:
  
  Result of the UpdateDirectConnectGatewayAssociation operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateDirectConnectGatewayAssociation
  default UpdateDirectConnectGatewayAssociationResponse updateDirectConnectGatewayAssociation(Consumer<UpdateDirectConnectGatewayAssociationRequest.Builder> updateDirectConnectGatewayAssociationRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the specified attributes of the Direct Connect gateway association.
  
  Add or remove prefixes from the association.
  
  This is a convenience which creates an instance of the UpdateDirectConnectGatewayAssociationRequest.Builder avoiding the need to create one manually via UpdateDirectConnectGatewayAssociationRequest.builder()
  
  Parameters:
  
  updateDirectConnectGatewayAssociationRequest - A Consumer that will call methods on UpdateDirectConnectGatewayAssociationRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateDirectConnectGatewayAssociation operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateLag
  default UpdateLagResponse updateLag(UpdateLagRequest updateLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the attributes of the specified link aggregation group (LAG).
  
  You can update the following LAG attributes:
  
  The name of the LAG.
  
  The value for the minimum number of connections that must be operational for the LAG itself to be operational.
  
  The LAG's MACsec encryption mode.
  
  Amazon Web Services assigns this value to each connection which is part of the LAG.
  
  The tags
  
  If you adjust the threshold value for the minimum number of operational connections, ensure that the new value does not cause the LAG to fall below the threshold and become non-operational.
  
  Parameters:
  
  updateLagRequest -
  
  Returns:
  
  Result of the UpdateLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateLag
  default UpdateLagResponse updateLag(Consumer<UpdateLagRequest.Builder> updateLagRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the attributes of the specified link aggregation group (LAG).
  
  You can update the following LAG attributes:
  
  The name of the LAG.
  
  The value for the minimum number of connections that must be operational for the LAG itself to be operational.
  
  The LAG's MACsec encryption mode.
  
  Amazon Web Services assigns this value to each connection which is part of the LAG.
  
  The tags
  
  If you adjust the threshold value for the minimum number of operational connections, ensure that the new value does not cause the LAG to fall below the threshold and become non-operational.
  
  This is a convenience which creates an instance of the UpdateLagRequest.Builder avoiding the need to create one manually via UpdateLagRequest.builder()
  
  Parameters:
  
  updateLagRequest - A Consumer that will call methods on UpdateLagRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateLag operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateVirtualInterfaceAttributes
  default UpdateVirtualInterfaceAttributesResponse updateVirtualInterfaceAttributes(UpdateVirtualInterfaceAttributesRequest updateVirtualInterfaceAttributesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the specified attributes of the specified virtual private interface.
  
  Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
  
  Parameters:
  
  updateVirtualInterfaceAttributesRequest -
  
  Returns:
  
  Result of the UpdateVirtualInterfaceAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateVirtualInterfaceAttributes
  default UpdateVirtualInterfaceAttributesResponse updateVirtualInterfaceAttributes(Consumer<UpdateVirtualInterfaceAttributesRequest.Builder> updateVirtualInterfaceAttributesRequest) throws DirectConnectServerException, DirectConnectClientException, AwsServiceException, SdkClientException, DirectConnectException
  
  Updates the specified attributes of the specified virtual private interface.
  
  Setting the MTU of a virtual interface to 8500 (jumbo frames) can cause an update to the underlying physical connection if it wasn't updated to support jumbo frames. Updating the connection disrupts network connectivity for all virtual interfaces associated with the connection for up to 30 seconds. To check whether your connection supports jumbo frames, call DescribeConnections. To check whether your virtual interface supports jumbo frames, call DescribeVirtualInterfaces.
  
  This is a convenience which creates an instance of the UpdateVirtualInterfaceAttributesRequest.Builder avoiding the need to create one manually via UpdateVirtualInterfaceAttributesRequest.builder()
  
  Parameters:
  
  updateVirtualInterfaceAttributesRequest - A Consumer that will call methods on UpdateVirtualInterfaceAttributesRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateVirtualInterfaceAttributes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- create
  
  static DirectConnectClient create()
  
  Create a DirectConnectClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
- builder
  
  static DirectConnectClientBuilder builder()
  
  Create a builder that can be used to configure and create a DirectConnectClient.
- serviceMetadata
  
  static ServiceMetadata serviceMetadata()
- serviceClientConfiguration
  
  default DirectConnectServiceClientConfiguration serviceClientConfiguration()
  
  Description copied from interface: SdkClient
  
  The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
  
  Specified by:
  
  serviceClientConfiguration in interface AwsClient
  
  Specified by:
  
  serviceClientConfiguration in interface SdkClient
  
  Returns:
  
  SdkServiceClientConfiguration

Interface DirectConnectClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Details

SERVICE_NAME

SERVICE_METADATA_ID

Method Details

acceptDirectConnectGatewayAssociationProposal

acceptDirectConnectGatewayAssociationProposal

allocateHostedConnection

allocateHostedConnection

allocatePrivateVirtualInterface

allocatePrivateVirtualInterface

allocatePublicVirtualInterface

allocatePublicVirtualInterface

allocateTransitVirtualInterface

allocateTransitVirtualInterface

associateConnectionWithLag

associateConnectionWithLag

associateHostedConnection

associateHostedConnection

associateMacSecKey

associateMacSecKey

associateVirtualInterface

associateVirtualInterface

confirmConnection

confirmConnection

confirmCustomerAgreement

confirmCustomerAgreement

confirmPrivateVirtualInterface

confirmPrivateVirtualInterface

confirmPublicVirtualInterface

confirmPublicVirtualInterface

confirmTransitVirtualInterface

confirmTransitVirtualInterface

createBGPPeer

createBGPPeer

createConnection

createConnection

createDirectConnectGateway

createDirectConnectGateway

createDirectConnectGatewayAssociation

createDirectConnectGatewayAssociation

createDirectConnectGatewayAssociationProposal

createDirectConnectGatewayAssociationProposal

createInterconnect

createInterconnect

createLag

createLag

createPrivateVirtualInterface

createPrivateVirtualInterface

createPublicVirtualInterface

createPublicVirtualInterface

createTransitVirtualInterface

createTransitVirtualInterface

deleteBGPPeer

deleteBGPPeer

deleteConnection

deleteConnection

deleteDirectConnectGateway

deleteDirectConnectGateway

deleteDirectConnectGatewayAssociation

deleteDirectConnectGatewayAssociation

deleteDirectConnectGatewayAssociationProposal

deleteDirectConnectGatewayAssociationProposal

deleteInterconnect

deleteInterconnect

deleteLag

deleteLag

deleteVirtualInterface

deleteVirtualInterface

describeConnections

describeConnections

describeConnections

describeCustomerMetadata

describeCustomerMetadata

describeDirectConnectGatewayAssociationProposals

describeDirectConnectGatewayAssociationProposals