All Superinterfaces:: AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient

@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface AutoScalingClient extends AwsClient

Service client for accessing Auto Scaling. This can be created using the static builder() method. Amazon EC2 Auto Scaling

Amazon EC2 Auto Scaling is designed to automatically launch and terminate EC2 instances based on user-defined scaling policies, scheduled actions, and health checks.

For more information, see the Amazon EC2 Auto Scaling User Guide and the Amazon EC2 Auto Scaling API Reference.

Field Summary

Fields

Modifier and Type

Field

Description

static final String

SERVICE_METADATA_ID

Value for looking up the service's metadata from the ServiceMetadataProvider.

static final String

SERVICE_NAME
Method Summary

Modifier and Type

Method

Description

default AttachInstancesResponse

attachInstances(Consumer<AttachInstancesRequest.Builder> attachInstancesRequest)

Attaches one or more EC2 instances to the specified Auto Scaling group.

default AttachInstancesResponse

attachInstances(AttachInstancesRequest attachInstancesRequest)

Attaches one or more EC2 instances to the specified Auto Scaling group.

default AttachLoadBalancersResponse

attachLoadBalancers(Consumer<AttachLoadBalancersRequest.Builder> attachLoadBalancersRequest)

default AttachLoadBalancersResponse

attachLoadBalancers(AttachLoadBalancersRequest attachLoadBalancersRequest)

default AttachLoadBalancerTargetGroupsResponse

attachLoadBalancerTargetGroups(Consumer<AttachLoadBalancerTargetGroupsRequest.Builder> attachLoadBalancerTargetGroupsRequest)

default AttachLoadBalancerTargetGroupsResponse

attachLoadBalancerTargetGroups(AttachLoadBalancerTargetGroupsRequest attachLoadBalancerTargetGroupsRequest)

default AttachTrafficSourcesResponse

attachTrafficSources(Consumer<AttachTrafficSourcesRequest.Builder> attachTrafficSourcesRequest)

Attaches one or more traffic sources to the specified Auto Scaling group.

default AttachTrafficSourcesResponse

attachTrafficSources(AttachTrafficSourcesRequest attachTrafficSourcesRequest)

Attaches one or more traffic sources to the specified Auto Scaling group.

default BatchDeleteScheduledActionResponse

batchDeleteScheduledAction(Consumer<BatchDeleteScheduledActionRequest.Builder> batchDeleteScheduledActionRequest)

Deletes one or more scheduled actions for the specified Auto Scaling group.

default BatchDeleteScheduledActionResponse

batchDeleteScheduledAction(BatchDeleteScheduledActionRequest batchDeleteScheduledActionRequest)

Deletes one or more scheduled actions for the specified Auto Scaling group.

default BatchPutScheduledUpdateGroupActionResponse

batchPutScheduledUpdateGroupAction(Consumer<BatchPutScheduledUpdateGroupActionRequest.Builder> batchPutScheduledUpdateGroupActionRequest)

Creates or updates one or more scheduled scaling actions for an Auto Scaling group.

default BatchPutScheduledUpdateGroupActionResponse

batchPutScheduledUpdateGroupAction(BatchPutScheduledUpdateGroupActionRequest batchPutScheduledUpdateGroupActionRequest)

Creates or updates one or more scheduled scaling actions for an Auto Scaling group.

static AutoScalingClientBuilder

builder()

Create a builder that can be used to configure and create a AutoScalingClient.

default CancelInstanceRefreshResponse

cancelInstanceRefresh(Consumer<CancelInstanceRefreshRequest.Builder> cancelInstanceRefreshRequest)

Cancels an instance refresh or rollback that is in progress.

default CancelInstanceRefreshResponse

cancelInstanceRefresh(CancelInstanceRefreshRequest cancelInstanceRefreshRequest)

Cancels an instance refresh or rollback that is in progress.

default CompleteLifecycleActionResponse

completeLifecycleAction(Consumer<CompleteLifecycleActionRequest.Builder> completeLifecycleActionRequest)

Completes the lifecycle action for the specified token or instance with the specified result.

default CompleteLifecycleActionResponse

completeLifecycleAction(CompleteLifecycleActionRequest completeLifecycleActionRequest)

Completes the lifecycle action for the specified token or instance with the specified result.

static AutoScalingClient

create()

Create a AutoScalingClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

default CreateAutoScalingGroupResponse

createAutoScalingGroup(Consumer<CreateAutoScalingGroupRequest.Builder> createAutoScalingGroupRequest)

We strongly recommend using a launch template when calling this operation to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.

default CreateAutoScalingGroupResponse

createAutoScalingGroup(CreateAutoScalingGroupRequest createAutoScalingGroupRequest)

We strongly recommend using a launch template when calling this operation to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.

default CreateLaunchConfigurationResponse

createLaunchConfiguration(Consumer<CreateLaunchConfigurationRequest.Builder> createLaunchConfigurationRequest)

Creates a launch configuration.

default CreateLaunchConfigurationResponse

createLaunchConfiguration(CreateLaunchConfigurationRequest createLaunchConfigurationRequest)

Creates a launch configuration.

default CreateOrUpdateTagsResponse

createOrUpdateTags(Consumer<CreateOrUpdateTagsRequest.Builder> createOrUpdateTagsRequest)

Creates or updates tags for the specified Auto Scaling group.

default CreateOrUpdateTagsResponse

createOrUpdateTags(CreateOrUpdateTagsRequest createOrUpdateTagsRequest)

Creates or updates tags for the specified Auto Scaling group.

default DeleteAutoScalingGroupResponse

deleteAutoScalingGroup(Consumer<DeleteAutoScalingGroupRequest.Builder> deleteAutoScalingGroupRequest)

Deletes the specified Auto Scaling group.

default DeleteAutoScalingGroupResponse

deleteAutoScalingGroup(DeleteAutoScalingGroupRequest deleteAutoScalingGroupRequest)

Deletes the specified Auto Scaling group.

default DeleteLaunchConfigurationResponse

deleteLaunchConfiguration(Consumer<DeleteLaunchConfigurationRequest.Builder> deleteLaunchConfigurationRequest)

Deletes the specified launch configuration.

default DeleteLaunchConfigurationResponse

deleteLaunchConfiguration(DeleteLaunchConfigurationRequest deleteLaunchConfigurationRequest)

Deletes the specified launch configuration.

default DeleteLifecycleHookResponse

deleteLifecycleHook(Consumer<DeleteLifecycleHookRequest.Builder> deleteLifecycleHookRequest)

Deletes the specified lifecycle hook.

default DeleteLifecycleHookResponse

deleteLifecycleHook(DeleteLifecycleHookRequest deleteLifecycleHookRequest)

Deletes the specified lifecycle hook.

default DeleteNotificationConfigurationResponse

deleteNotificationConfiguration(Consumer<DeleteNotificationConfigurationRequest.Builder> deleteNotificationConfigurationRequest)

Deletes the specified notification.

default DeleteNotificationConfigurationResponse

deleteNotificationConfiguration(DeleteNotificationConfigurationRequest deleteNotificationConfigurationRequest)

Deletes the specified notification.

default DeletePolicyResponse

deletePolicy(Consumer<DeletePolicyRequest.Builder> deletePolicyRequest)

Deletes the specified scaling policy.

default DeletePolicyResponse

deletePolicy(DeletePolicyRequest deletePolicyRequest)

Deletes the specified scaling policy.

default DeleteScheduledActionResponse

deleteScheduledAction(Consumer<DeleteScheduledActionRequest.Builder> deleteScheduledActionRequest)

Deletes the specified scheduled action.

default DeleteScheduledActionResponse

deleteScheduledAction(DeleteScheduledActionRequest deleteScheduledActionRequest)

Deletes the specified scheduled action.

default DeleteTagsResponse

deleteTags(Consumer<DeleteTagsRequest.Builder> deleteTagsRequest)

Deletes the specified tags.

default DeleteTagsResponse

deleteTags(DeleteTagsRequest deleteTagsRequest)

Deletes the specified tags.

default DeleteWarmPoolResponse

deleteWarmPool(Consumer<DeleteWarmPoolRequest.Builder> deleteWarmPoolRequest)

Deletes the warm pool for the specified Auto Scaling group.

default DeleteWarmPoolResponse

deleteWarmPool(DeleteWarmPoolRequest deleteWarmPoolRequest)

Deletes the warm pool for the specified Auto Scaling group.

default DescribeAccountLimitsResponse

describeAccountLimits()

Describes the current Amazon EC2 Auto Scaling resource quotas for your account.

default DescribeAccountLimitsResponse

describeAccountLimits(Consumer<DescribeAccountLimitsRequest.Builder> describeAccountLimitsRequest)

Describes the current Amazon EC2 Auto Scaling resource quotas for your account.

default DescribeAccountLimitsResponse

describeAccountLimits(DescribeAccountLimitsRequest describeAccountLimitsRequest)

Describes the current Amazon EC2 Auto Scaling resource quotas for your account.

default DescribeAdjustmentTypesResponse

describeAdjustmentTypes()

Describes the available adjustment types for step scaling and simple scaling policies.

default DescribeAdjustmentTypesResponse

describeAdjustmentTypes(Consumer<DescribeAdjustmentTypesRequest.Builder> describeAdjustmentTypesRequest)

Describes the available adjustment types for step scaling and simple scaling policies.

default DescribeAdjustmentTypesResponse

describeAdjustmentTypes(DescribeAdjustmentTypesRequest describeAdjustmentTypesRequest)

Describes the available adjustment types for step scaling and simple scaling policies.

default DescribeAutoScalingGroupsResponse

describeAutoScalingGroups()

Gets information about the Auto Scaling groups in the account and Region.

default DescribeAutoScalingGroupsResponse

describeAutoScalingGroups(Consumer<DescribeAutoScalingGroupsRequest.Builder> describeAutoScalingGroupsRequest)

Gets information about the Auto Scaling groups in the account and Region.

default DescribeAutoScalingGroupsResponse

describeAutoScalingGroups(DescribeAutoScalingGroupsRequest describeAutoScalingGroupsRequest)

Gets information about the Auto Scaling groups in the account and Region.

default DescribeAutoScalingGroupsIterable

describeAutoScalingGroupsPaginator()

This is a variant of describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation.

default DescribeAutoScalingGroupsIterable

describeAutoScalingGroupsPaginator(Consumer<DescribeAutoScalingGroupsRequest.Builder> describeAutoScalingGroupsRequest)

This is a variant of describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation.

default DescribeAutoScalingGroupsIterable

describeAutoScalingGroupsPaginator(DescribeAutoScalingGroupsRequest describeAutoScalingGroupsRequest)

This is a variant of describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation.

default DescribeAutoScalingInstancesResponse

describeAutoScalingInstances()

Gets information about the Auto Scaling instances in the account and Region.

default DescribeAutoScalingInstancesResponse

describeAutoScalingInstances(Consumer<DescribeAutoScalingInstancesRequest.Builder> describeAutoScalingInstancesRequest)

Gets information about the Auto Scaling instances in the account and Region.

default DescribeAutoScalingInstancesResponse

describeAutoScalingInstances(DescribeAutoScalingInstancesRequest describeAutoScalingInstancesRequest)

Gets information about the Auto Scaling instances in the account and Region.

default DescribeAutoScalingInstancesIterable

describeAutoScalingInstancesPaginator()

This is a variant of describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation.

default DescribeAutoScalingInstancesIterable

describeAutoScalingInstancesPaginator(Consumer<DescribeAutoScalingInstancesRequest.Builder> describeAutoScalingInstancesRequest)

This is a variant of describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation.

default DescribeAutoScalingInstancesIterable

describeAutoScalingInstancesPaginator(DescribeAutoScalingInstancesRequest describeAutoScalingInstancesRequest)

This is a variant of describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation.

default DescribeAutoScalingNotificationTypesResponse

describeAutoScalingNotificationTypes()

Describes the notification types that are supported by Amazon EC2 Auto Scaling.

default DescribeAutoScalingNotificationTypesResponse

describeAutoScalingNotificationTypes(Consumer<DescribeAutoScalingNotificationTypesRequest.Builder> describeAutoScalingNotificationTypesRequest)

Describes the notification types that are supported by Amazon EC2 Auto Scaling.

default DescribeAutoScalingNotificationTypesResponse

describeAutoScalingNotificationTypes(DescribeAutoScalingNotificationTypesRequest describeAutoScalingNotificationTypesRequest)

Describes the notification types that are supported by Amazon EC2 Auto Scaling.

default DescribeInstanceRefreshesResponse

describeInstanceRefreshes(Consumer<DescribeInstanceRefreshesRequest.Builder> describeInstanceRefreshesRequest)

Gets information about the instance refreshes for the specified Auto Scaling group from the previous six weeks.

default DescribeInstanceRefreshesResponse

describeInstanceRefreshes(DescribeInstanceRefreshesRequest describeInstanceRefreshesRequest)

Gets information about the instance refreshes for the specified Auto Scaling group from the previous six weeks.

default DescribeInstanceRefreshesIterable

describeInstanceRefreshesPaginator(Consumer<DescribeInstanceRefreshesRequest.Builder> describeInstanceRefreshesRequest)

This is a variant of describeInstanceRefreshes(software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesRequest) operation.

default DescribeInstanceRefreshesIterable

describeInstanceRefreshesPaginator(DescribeInstanceRefreshesRequest describeInstanceRefreshesRequest)

This is a variant of describeInstanceRefreshes(software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesRequest) operation.

default DescribeLaunchConfigurationsResponse

describeLaunchConfigurations()

Gets information about the launch configurations in the account and Region.

default DescribeLaunchConfigurationsResponse

describeLaunchConfigurations(Consumer<DescribeLaunchConfigurationsRequest.Builder> describeLaunchConfigurationsRequest)

Gets information about the launch configurations in the account and Region.

default DescribeLaunchConfigurationsResponse

describeLaunchConfigurations(DescribeLaunchConfigurationsRequest describeLaunchConfigurationsRequest)

Gets information about the launch configurations in the account and Region.

default DescribeLaunchConfigurationsIterable

describeLaunchConfigurationsPaginator()

This is a variant of describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation.

default DescribeLaunchConfigurationsIterable

describeLaunchConfigurationsPaginator(Consumer<DescribeLaunchConfigurationsRequest.Builder> describeLaunchConfigurationsRequest)

This is a variant of describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation.

default DescribeLaunchConfigurationsIterable

describeLaunchConfigurationsPaginator(DescribeLaunchConfigurationsRequest describeLaunchConfigurationsRequest)

This is a variant of describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation.

default DescribeLifecycleHooksResponse

describeLifecycleHooks(Consumer<DescribeLifecycleHooksRequest.Builder> describeLifecycleHooksRequest)

Gets information about the lifecycle hooks for the specified Auto Scaling group.

default DescribeLifecycleHooksResponse

describeLifecycleHooks(DescribeLifecycleHooksRequest describeLifecycleHooksRequest)

Gets information about the lifecycle hooks for the specified Auto Scaling group.

default DescribeLifecycleHookTypesResponse

describeLifecycleHookTypes()

Describes the available types of lifecycle hooks.

default DescribeLifecycleHookTypesResponse

describeLifecycleHookTypes(Consumer<DescribeLifecycleHookTypesRequest.Builder> describeLifecycleHookTypesRequest)

Describes the available types of lifecycle hooks.

default DescribeLifecycleHookTypesResponse

describeLifecycleHookTypes(DescribeLifecycleHookTypesRequest describeLifecycleHookTypesRequest)

Describes the available types of lifecycle hooks.

default DescribeLoadBalancersResponse

describeLoadBalancers(Consumer<DescribeLoadBalancersRequest.Builder> describeLoadBalancersRequest)

default DescribeLoadBalancersResponse

describeLoadBalancers(DescribeLoadBalancersRequest describeLoadBalancersRequest)

default DescribeLoadBalancersIterable

describeLoadBalancersPaginator(Consumer<DescribeLoadBalancersRequest.Builder> describeLoadBalancersRequest)

This is a variant of describeLoadBalancers(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersRequest) operation.

default DescribeLoadBalancersIterable

describeLoadBalancersPaginator(DescribeLoadBalancersRequest describeLoadBalancersRequest)

This is a variant of describeLoadBalancers(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersRequest) operation.

default DescribeLoadBalancerTargetGroupsResponse

describeLoadBalancerTargetGroups(Consumer<DescribeLoadBalancerTargetGroupsRequest.Builder> describeLoadBalancerTargetGroupsRequest)

default DescribeLoadBalancerTargetGroupsResponse

describeLoadBalancerTargetGroups(DescribeLoadBalancerTargetGroupsRequest describeLoadBalancerTargetGroupsRequest)

default DescribeLoadBalancerTargetGroupsIterable

describeLoadBalancerTargetGroupsPaginator(Consumer<DescribeLoadBalancerTargetGroupsRequest.Builder> describeLoadBalancerTargetGroupsRequest)

This is a variant of describeLoadBalancerTargetGroups(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsRequest) operation.

default DescribeLoadBalancerTargetGroupsIterable

describeLoadBalancerTargetGroupsPaginator(DescribeLoadBalancerTargetGroupsRequest describeLoadBalancerTargetGroupsRequest)

This is a variant of describeLoadBalancerTargetGroups(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsRequest) operation.

default DescribeMetricCollectionTypesResponse

describeMetricCollectionTypes()

Describes the available CloudWatch metrics for Amazon EC2 Auto Scaling.

default DescribeMetricCollectionTypesResponse

describeMetricCollectionTypes(Consumer<DescribeMetricCollectionTypesRequest.Builder> describeMetricCollectionTypesRequest)

Describes the available CloudWatch metrics for Amazon EC2 Auto Scaling.

default DescribeMetricCollectionTypesResponse

describeMetricCollectionTypes(DescribeMetricCollectionTypesRequest describeMetricCollectionTypesRequest)

Describes the available CloudWatch metrics for Amazon EC2 Auto Scaling.

default DescribeNotificationConfigurationsResponse

describeNotificationConfigurations()

Gets information about the Amazon SNS notifications that are configured for one or more Auto Scaling groups.

default DescribeNotificationConfigurationsResponse

describeNotificationConfigurations(Consumer<DescribeNotificationConfigurationsRequest.Builder> describeNotificationConfigurationsRequest)

Gets information about the Amazon SNS notifications that are configured for one or more Auto Scaling groups.

default DescribeNotificationConfigurationsResponse

describeNotificationConfigurations(DescribeNotificationConfigurationsRequest describeNotificationConfigurationsRequest)

Gets information about the Amazon SNS notifications that are configured for one or more Auto Scaling groups.

default DescribeNotificationConfigurationsIterable

describeNotificationConfigurationsPaginator()

This is a variant of describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation.

default DescribeNotificationConfigurationsIterable

describeNotificationConfigurationsPaginator(Consumer<DescribeNotificationConfigurationsRequest.Builder> describeNotificationConfigurationsRequest)

This is a variant of describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation.

default DescribeNotificationConfigurationsIterable

describeNotificationConfigurationsPaginator(DescribeNotificationConfigurationsRequest describeNotificationConfigurationsRequest)

This is a variant of describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation.

default DescribePoliciesResponse

describePolicies()

Gets information about the scaling policies in the account and Region.

default DescribePoliciesResponse

describePolicies(Consumer<DescribePoliciesRequest.Builder> describePoliciesRequest)

Gets information about the scaling policies in the account and Region.

default DescribePoliciesResponse

describePolicies(DescribePoliciesRequest describePoliciesRequest)

Gets information about the scaling policies in the account and Region.

default DescribePoliciesIterable

describePoliciesPaginator()

This is a variant of describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation.

default DescribePoliciesIterable

describePoliciesPaginator(Consumer<DescribePoliciesRequest.Builder> describePoliciesRequest)

This is a variant of describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation.

default DescribePoliciesIterable

describePoliciesPaginator(DescribePoliciesRequest describePoliciesRequest)

This is a variant of describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation.

default DescribeScalingActivitiesResponse

describeScalingActivities()

Gets information about the scaling activities in the account and Region.

default DescribeScalingActivitiesResponse

describeScalingActivities(Consumer<DescribeScalingActivitiesRequest.Builder> describeScalingActivitiesRequest)

Gets information about the scaling activities in the account and Region.

default DescribeScalingActivitiesResponse

describeScalingActivities(DescribeScalingActivitiesRequest describeScalingActivitiesRequest)

Gets information about the scaling activities in the account and Region.

default DescribeScalingActivitiesIterable

describeScalingActivitiesPaginator()

This is a variant of describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation.

default DescribeScalingActivitiesIterable

describeScalingActivitiesPaginator(Consumer<DescribeScalingActivitiesRequest.Builder> describeScalingActivitiesRequest)

This is a variant of describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation.

default DescribeScalingActivitiesIterable

describeScalingActivitiesPaginator(DescribeScalingActivitiesRequest describeScalingActivitiesRequest)

This is a variant of describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation.

default DescribeScalingProcessTypesResponse

describeScalingProcessTypes()

Describes the scaling process types for use with the ResumeProcesses and SuspendProcesses APIs.

default DescribeScalingProcessTypesResponse

describeScalingProcessTypes(Consumer<DescribeScalingProcessTypesRequest.Builder> describeScalingProcessTypesRequest)

Describes the scaling process types for use with the ResumeProcesses and SuspendProcesses APIs.

default DescribeScalingProcessTypesResponse

describeScalingProcessTypes(DescribeScalingProcessTypesRequest describeScalingProcessTypesRequest)

Describes the scaling process types for use with the ResumeProcesses and SuspendProcesses APIs.

default DescribeScheduledActionsResponse

describeScheduledActions()

Gets information about the scheduled actions that haven't run or that have not reached their end time.

default DescribeScheduledActionsResponse

describeScheduledActions(Consumer<DescribeScheduledActionsRequest.Builder> describeScheduledActionsRequest)

Gets information about the scheduled actions that haven't run or that have not reached their end time.

default DescribeScheduledActionsResponse

describeScheduledActions(DescribeScheduledActionsRequest describeScheduledActionsRequest)

Gets information about the scheduled actions that haven't run or that have not reached their end time.

default DescribeScheduledActionsIterable

describeScheduledActionsPaginator()

This is a variant of describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation.

default DescribeScheduledActionsIterable

describeScheduledActionsPaginator(Consumer<DescribeScheduledActionsRequest.Builder> describeScheduledActionsRequest)

This is a variant of describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation.

default DescribeScheduledActionsIterable

describeScheduledActionsPaginator(DescribeScheduledActionsRequest describeScheduledActionsRequest)

This is a variant of describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation.

default DescribeTagsResponse

describeTags()

Describes the specified tags.

default DescribeTagsResponse

describeTags(Consumer<DescribeTagsRequest.Builder> describeTagsRequest)

Describes the specified tags.

default DescribeTagsResponse

describeTags(DescribeTagsRequest describeTagsRequest)

Describes the specified tags.

default DescribeTagsIterable

describeTagsPaginator()

This is a variant of describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation.

default DescribeTagsIterable

describeTagsPaginator(Consumer<DescribeTagsRequest.Builder> describeTagsRequest)

This is a variant of describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation.

default DescribeTagsIterable

describeTagsPaginator(DescribeTagsRequest describeTagsRequest)

This is a variant of describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation.

default DescribeTerminationPolicyTypesResponse

describeTerminationPolicyTypes()

Describes the termination policies supported by Amazon EC2 Auto Scaling.

default DescribeTerminationPolicyTypesResponse

describeTerminationPolicyTypes(Consumer<DescribeTerminationPolicyTypesRequest.Builder> describeTerminationPolicyTypesRequest)

Describes the termination policies supported by Amazon EC2 Auto Scaling.

default DescribeTerminationPolicyTypesResponse

describeTerminationPolicyTypes(DescribeTerminationPolicyTypesRequest describeTerminationPolicyTypesRequest)

Describes the termination policies supported by Amazon EC2 Auto Scaling.

default DescribeTrafficSourcesResponse

describeTrafficSources(Consumer<DescribeTrafficSourcesRequest.Builder> describeTrafficSourcesRequest)

Gets information about the traffic sources for the specified Auto Scaling group.

default DescribeTrafficSourcesResponse

describeTrafficSources(DescribeTrafficSourcesRequest describeTrafficSourcesRequest)

Gets information about the traffic sources for the specified Auto Scaling group.

default DescribeTrafficSourcesIterable

describeTrafficSourcesPaginator(Consumer<DescribeTrafficSourcesRequest.Builder> describeTrafficSourcesRequest)

This is a variant of describeTrafficSources(software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesRequest) operation.

default DescribeTrafficSourcesIterable

describeTrafficSourcesPaginator(DescribeTrafficSourcesRequest describeTrafficSourcesRequest)

This is a variant of describeTrafficSources(software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesRequest) operation.

default DescribeWarmPoolResponse

describeWarmPool(Consumer<DescribeWarmPoolRequest.Builder> describeWarmPoolRequest)

Gets information about a warm pool and its instances.

default DescribeWarmPoolResponse

describeWarmPool(DescribeWarmPoolRequest describeWarmPoolRequest)

Gets information about a warm pool and its instances.

default DescribeWarmPoolIterable

describeWarmPoolPaginator(Consumer<DescribeWarmPoolRequest.Builder> describeWarmPoolRequest)

This is a variant of describeWarmPool(software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolRequest) operation.

default DescribeWarmPoolIterable

describeWarmPoolPaginator(DescribeWarmPoolRequest describeWarmPoolRequest)

This is a variant of describeWarmPool(software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolRequest) operation.

default DetachInstancesResponse

detachInstances(Consumer<DetachInstancesRequest.Builder> detachInstancesRequest)

Removes one or more instances from the specified Auto Scaling group.

default DetachInstancesResponse

detachInstances(DetachInstancesRequest detachInstancesRequest)

Removes one or more instances from the specified Auto Scaling group.

default DetachLoadBalancersResponse

detachLoadBalancers(Consumer<DetachLoadBalancersRequest.Builder> detachLoadBalancersRequest)

default DetachLoadBalancersResponse

detachLoadBalancers(DetachLoadBalancersRequest detachLoadBalancersRequest)

default DetachLoadBalancerTargetGroupsResponse

detachLoadBalancerTargetGroups(Consumer<DetachLoadBalancerTargetGroupsRequest.Builder> detachLoadBalancerTargetGroupsRequest)

default DetachLoadBalancerTargetGroupsResponse

detachLoadBalancerTargetGroups(DetachLoadBalancerTargetGroupsRequest detachLoadBalancerTargetGroupsRequest)

default DetachTrafficSourcesResponse

detachTrafficSources(Consumer<DetachTrafficSourcesRequest.Builder> detachTrafficSourcesRequest)

Detaches one or more traffic sources from the specified Auto Scaling group.

default DetachTrafficSourcesResponse

detachTrafficSources(DetachTrafficSourcesRequest detachTrafficSourcesRequest)

Detaches one or more traffic sources from the specified Auto Scaling group.

default DisableMetricsCollectionResponse

disableMetricsCollection(Consumer<DisableMetricsCollectionRequest.Builder> disableMetricsCollectionRequest)

Disables group metrics collection for the specified Auto Scaling group.

default DisableMetricsCollectionResponse

disableMetricsCollection(DisableMetricsCollectionRequest disableMetricsCollectionRequest)

Disables group metrics collection for the specified Auto Scaling group.

default EnableMetricsCollectionResponse

enableMetricsCollection(Consumer<EnableMetricsCollectionRequest.Builder> enableMetricsCollectionRequest)

Enables group metrics collection for the specified Auto Scaling group.

default EnableMetricsCollectionResponse

enableMetricsCollection(EnableMetricsCollectionRequest enableMetricsCollectionRequest)

Enables group metrics collection for the specified Auto Scaling group.

default EnterStandbyResponse

enterStandby(Consumer<EnterStandbyRequest.Builder> enterStandbyRequest)

Moves the specified instances into the standby state.

default EnterStandbyResponse

enterStandby(EnterStandbyRequest enterStandbyRequest)

Moves the specified instances into the standby state.

default ExecutePolicyResponse

executePolicy(Consumer<ExecutePolicyRequest.Builder> executePolicyRequest)

Executes the specified policy.

default ExecutePolicyResponse

executePolicy(ExecutePolicyRequest executePolicyRequest)

Executes the specified policy.

default ExitStandbyResponse

exitStandby(Consumer<ExitStandbyRequest.Builder> exitStandbyRequest)

Moves the specified instances out of the standby state.

default ExitStandbyResponse

exitStandby(ExitStandbyRequest exitStandbyRequest)

Moves the specified instances out of the standby state.

default GetPredictiveScalingForecastResponse

getPredictiveScalingForecast(Consumer<GetPredictiveScalingForecastRequest.Builder> getPredictiveScalingForecastRequest)

Retrieves the forecast data for a predictive scaling policy.

default GetPredictiveScalingForecastResponse

getPredictiveScalingForecast(GetPredictiveScalingForecastRequest getPredictiveScalingForecastRequest)

Retrieves the forecast data for a predictive scaling policy.

default PutLifecycleHookResponse

putLifecycleHook(Consumer<PutLifecycleHookRequest.Builder> putLifecycleHookRequest)

Creates or updates a lifecycle hook for the specified Auto Scaling group.

default PutLifecycleHookResponse

putLifecycleHook(PutLifecycleHookRequest putLifecycleHookRequest)

Creates or updates a lifecycle hook for the specified Auto Scaling group.

default PutNotificationConfigurationResponse

putNotificationConfiguration(Consumer<PutNotificationConfigurationRequest.Builder> putNotificationConfigurationRequest)

Configures an Auto Scaling group to send notifications when specified events take place.

default PutNotificationConfigurationResponse

putNotificationConfiguration(PutNotificationConfigurationRequest putNotificationConfigurationRequest)

Configures an Auto Scaling group to send notifications when specified events take place.

default PutScalingPolicyResponse

putScalingPolicy(Consumer<PutScalingPolicyRequest.Builder> putScalingPolicyRequest)

Creates or updates a scaling policy for an Auto Scaling group.

default PutScalingPolicyResponse

putScalingPolicy(PutScalingPolicyRequest putScalingPolicyRequest)

Creates or updates a scaling policy for an Auto Scaling group.

default PutScheduledUpdateGroupActionResponse

putScheduledUpdateGroupAction(Consumer<PutScheduledUpdateGroupActionRequest.Builder> putScheduledUpdateGroupActionRequest)

Creates or updates a scheduled scaling action for an Auto Scaling group.

default PutScheduledUpdateGroupActionResponse

putScheduledUpdateGroupAction(PutScheduledUpdateGroupActionRequest putScheduledUpdateGroupActionRequest)

Creates or updates a scheduled scaling action for an Auto Scaling group.

default PutWarmPoolResponse

putWarmPool(Consumer<PutWarmPoolRequest.Builder> putWarmPoolRequest)

Creates or updates a warm pool for the specified Auto Scaling group.

default PutWarmPoolResponse

putWarmPool(PutWarmPoolRequest putWarmPoolRequest)

Creates or updates a warm pool for the specified Auto Scaling group.

default RecordLifecycleActionHeartbeatResponse

recordLifecycleActionHeartbeat(Consumer<RecordLifecycleActionHeartbeatRequest.Builder> recordLifecycleActionHeartbeatRequest)

Records a heartbeat for the lifecycle action associated with the specified token or instance.

default RecordLifecycleActionHeartbeatResponse

recordLifecycleActionHeartbeat(RecordLifecycleActionHeartbeatRequest recordLifecycleActionHeartbeatRequest)

Records a heartbeat for the lifecycle action associated with the specified token or instance.

default ResumeProcessesResponse

resumeProcesses(Consumer<ResumeProcessesRequest.Builder> resumeProcessesRequest)

Resumes the specified suspended auto scaling processes, or all suspended process, for the specified Auto Scaling group.

default ResumeProcessesResponse

resumeProcesses(ResumeProcessesRequest resumeProcessesRequest)

Resumes the specified suspended auto scaling processes, or all suspended process, for the specified Auto Scaling group.

default RollbackInstanceRefreshResponse

rollbackInstanceRefresh(Consumer<RollbackInstanceRefreshRequest.Builder> rollbackInstanceRefreshRequest)

Cancels an instance refresh that is in progress and rolls back any changes that it made.

default RollbackInstanceRefreshResponse

rollbackInstanceRefresh(RollbackInstanceRefreshRequest rollbackInstanceRefreshRequest)

Cancels an instance refresh that is in progress and rolls back any changes that it made.

default AutoScalingServiceClientConfiguration

serviceClientConfiguration()

The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration

static ServiceMetadata

serviceMetadata()

default SetDesiredCapacityResponse

setDesiredCapacity(Consumer<SetDesiredCapacityRequest.Builder> setDesiredCapacityRequest)

Sets the size of the specified Auto Scaling group.

default SetDesiredCapacityResponse

setDesiredCapacity(SetDesiredCapacityRequest setDesiredCapacityRequest)

Sets the size of the specified Auto Scaling group.

default SetInstanceHealthResponse

setInstanceHealth(Consumer<SetInstanceHealthRequest.Builder> setInstanceHealthRequest)

Sets the health status of the specified instance.

default SetInstanceHealthResponse

setInstanceHealth(SetInstanceHealthRequest setInstanceHealthRequest)

Sets the health status of the specified instance.

default SetInstanceProtectionResponse

setInstanceProtection(Consumer<SetInstanceProtectionRequest.Builder> setInstanceProtectionRequest)

Updates the instance protection settings of the specified instances.

default SetInstanceProtectionResponse

setInstanceProtection(SetInstanceProtectionRequest setInstanceProtectionRequest)

Updates the instance protection settings of the specified instances.

default StartInstanceRefreshResponse

startInstanceRefresh(Consumer<StartInstanceRefreshRequest.Builder> startInstanceRefreshRequest)

Starts an instance refresh.

default StartInstanceRefreshResponse

startInstanceRefresh(StartInstanceRefreshRequest startInstanceRefreshRequest)

Starts an instance refresh.

default SuspendProcessesResponse

suspendProcesses(Consumer<SuspendProcessesRequest.Builder> suspendProcessesRequest)

Suspends the specified auto scaling processes, or all processes, for the specified Auto Scaling group.

default SuspendProcessesResponse

suspendProcesses(SuspendProcessesRequest suspendProcessesRequest)

Suspends the specified auto scaling processes, or all processes, for the specified Auto Scaling group.

default TerminateInstanceInAutoScalingGroupResponse

terminateInstanceInAutoScalingGroup(Consumer<TerminateInstanceInAutoScalingGroupRequest.Builder> terminateInstanceInAutoScalingGroupRequest)

Terminates the specified instance and optionally adjusts the desired group size.

default TerminateInstanceInAutoScalingGroupResponse

terminateInstanceInAutoScalingGroup(TerminateInstanceInAutoScalingGroupRequest terminateInstanceInAutoScalingGroupRequest)

Terminates the specified instance and optionally adjusts the desired group size.

default UpdateAutoScalingGroupResponse

updateAutoScalingGroup(Consumer<UpdateAutoScalingGroupRequest.Builder> updateAutoScalingGroupRequest)

We strongly recommend that all Auto Scaling groups use launch templates to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.

default UpdateAutoScalingGroupResponse

updateAutoScalingGroup(UpdateAutoScalingGroupRequest updateAutoScalingGroupRequest)

We strongly recommend that all Auto Scaling groups use launch templates to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.

default AutoScalingWaiter

waiter()

Create an instance of AutoScalingWaiter using this client.

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable
close

Methods inherited from interface software.amazon.awssdk.core.SdkClient
serviceName

Field Details
- SERVICE_NAME
  static final String SERVICE_NAME
  
  See Also:
  
  Constant Field Values
- SERVICE_METADATA_ID
  static final String SERVICE_METADATA_ID
  
  Value for looking up the service's metadata from the ServiceMetadataProvider.
  
  See Also:
  
  Constant Field Values
Method Details
- attachInstances
  default AttachInstancesResponse attachInstances(AttachInstancesRequest attachInstancesRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Attaches one or more EC2 instances to the specified Auto Scaling group.
  
  When you attach instances, Amazon EC2 Auto Scaling increases the desired capacity of the group by the number of instances being attached. If the number of instances being attached plus the desired capacity of the group exceeds the maximum size of the group, the operation fails.
  
  If there is a Classic Load Balancer attached to your Auto Scaling group, the instances are also registered with the load balancer. If there are target groups attached to your Auto Scaling group, the instances are also registered with the target groups.
  
  For more information, see Detach or attach instances in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  attachInstancesRequest -
  
  Returns:
  
  Result of the AttachInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- attachInstances
  default AttachInstancesResponse attachInstances(Consumer<AttachInstancesRequest.Builder> attachInstancesRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Attaches one or more EC2 instances to the specified Auto Scaling group.
  
  When you attach instances, Amazon EC2 Auto Scaling increases the desired capacity of the group by the number of instances being attached. If the number of instances being attached plus the desired capacity of the group exceeds the maximum size of the group, the operation fails.
  
  If there is a Classic Load Balancer attached to your Auto Scaling group, the instances are also registered with the load balancer. If there are target groups attached to your Auto Scaling group, the instances are also registered with the target groups.
  
  For more information, see Detach or attach instances in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the AttachInstancesRequest.Builder avoiding the need to create one manually via AttachInstancesRequest.builder()
  
  Parameters:
  
  attachInstancesRequest - A Consumer that will call methods on AttachInstancesRequest.Builder to create a request.
  
  Returns:
  
  Result of the AttachInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- attachLoadBalancerTargetGroups
  default AttachLoadBalancerTargetGroupsResponse attachLoadBalancerTargetGroups(AttachLoadBalancerTargetGroupsRequest attachLoadBalancerTargetGroupsRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by AttachTrafficSources, which can attach multiple traffic sources types. We recommend using AttachTrafficSources to simplify how you manage traffic sources. However, we continue to support AttachLoadBalancerTargetGroups. You can use both the original AttachLoadBalancerTargetGroups API operation and AttachTrafficSources on the same Auto Scaling group.
  
  Attaches one or more target groups to the specified Auto Scaling group.
  
  This operation is used with the following load balancer types:
  
  Application Load Balancer - Operates at the application layer (layer 7) and supports HTTP and HTTPS.
  
  Network Load Balancer - Operates at the transport layer (layer 4) and supports TCP, TLS, and UDP.
  
  Gateway Load Balancer - Operates at the network layer (layer 3).
  
  To describe the target groups for an Auto Scaling group, call the DescribeLoadBalancerTargetGroups API. To detach the target group from the Auto Scaling group, call the DetachLoadBalancerTargetGroups API.
  
  This operation is additive and does not detach existing target groups or Classic Load Balancers from the Auto Scaling group.
  
  For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  attachLoadBalancerTargetGroupsRequest -
  
  Returns:
  
  Result of the AttachLoadBalancerTargetGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- attachLoadBalancerTargetGroups
  default AttachLoadBalancerTargetGroupsResponse attachLoadBalancerTargetGroups(Consumer<AttachLoadBalancerTargetGroupsRequest.Builder> attachLoadBalancerTargetGroupsRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by AttachTrafficSources, which can attach multiple traffic sources types. We recommend using AttachTrafficSources to simplify how you manage traffic sources. However, we continue to support AttachLoadBalancerTargetGroups. You can use both the original AttachLoadBalancerTargetGroups API operation and AttachTrafficSources on the same Auto Scaling group.
  
  Attaches one or more target groups to the specified Auto Scaling group.
  
  This operation is used with the following load balancer types:
  
  Application Load Balancer - Operates at the application layer (layer 7) and supports HTTP and HTTPS.
  
  Network Load Balancer - Operates at the transport layer (layer 4) and supports TCP, TLS, and UDP.
  
  Gateway Load Balancer - Operates at the network layer (layer 3).
  
  To describe the target groups for an Auto Scaling group, call the DescribeLoadBalancerTargetGroups API. To detach the target group from the Auto Scaling group, call the DetachLoadBalancerTargetGroups API.
  
  This operation is additive and does not detach existing target groups or Classic Load Balancers from the Auto Scaling group.
  
  For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the AttachLoadBalancerTargetGroupsRequest.Builder avoiding the need to create one manually via AttachLoadBalancerTargetGroupsRequest.builder()
  
  Parameters:
  
  attachLoadBalancerTargetGroupsRequest - A Consumer that will call methods on AttachLoadBalancerTargetGroupsRequest.Builder to create a request.
  
  Returns:
  
  Result of the AttachLoadBalancerTargetGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- attachLoadBalancers
  default AttachLoadBalancersResponse attachLoadBalancers(AttachLoadBalancersRequest attachLoadBalancersRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by AttachTrafficSources, which can attach multiple traffic sources types. We recommend using AttachTrafficSources to simplify how you manage traffic sources. However, we continue to support AttachLoadBalancers. You can use both the original AttachLoadBalancers API operation and AttachTrafficSources on the same Auto Scaling group.
  
  Attaches one or more Classic Load Balancers to the specified Auto Scaling group. Amazon EC2 Auto Scaling registers the running instances with these Classic Load Balancers.
  
  To describe the load balancers for an Auto Scaling group, call the DescribeLoadBalancers API. To detach a load balancer from the Auto Scaling group, call the DetachLoadBalancers API.
  
  This operation is additive and does not detach existing Classic Load Balancers or target groups from the Auto Scaling group.
  
  For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  attachLoadBalancersRequest -
  
  Returns:
  
  Result of the AttachLoadBalancers operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- attachLoadBalancers
  default AttachLoadBalancersResponse attachLoadBalancers(Consumer<AttachLoadBalancersRequest.Builder> attachLoadBalancersRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by AttachTrafficSources, which can attach multiple traffic sources types. We recommend using AttachTrafficSources to simplify how you manage traffic sources. However, we continue to support AttachLoadBalancers. You can use both the original AttachLoadBalancers API operation and AttachTrafficSources on the same Auto Scaling group.
  
  Attaches one or more Classic Load Balancers to the specified Auto Scaling group. Amazon EC2 Auto Scaling registers the running instances with these Classic Load Balancers.
  
  To describe the load balancers for an Auto Scaling group, call the DescribeLoadBalancers API. To detach a load balancer from the Auto Scaling group, call the DetachLoadBalancers API.
  
  This operation is additive and does not detach existing Classic Load Balancers or target groups from the Auto Scaling group.
  
  For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the AttachLoadBalancersRequest.Builder avoiding the need to create one manually via AttachLoadBalancersRequest.builder()
  
  Parameters:
  
  attachLoadBalancersRequest - A Consumer that will call methods on AttachLoadBalancersRequest.Builder to create a request.
  
  Returns:
  
  Result of the AttachLoadBalancers operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- attachTrafficSources
  default AttachTrafficSourcesResponse attachTrafficSources(AttachTrafficSourcesRequest attachTrafficSourcesRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Attaches one or more traffic sources to the specified Auto Scaling group.
  
  You can use any of the following as traffic sources for an Auto Scaling group:
  
  Application Load Balancer
  
  Classic Load Balancer
  
  Gateway Load Balancer
  
  Network Load Balancer
  
  VPC Lattice
  
  This operation is additive and does not detach existing traffic sources from the Auto Scaling group.
  
  After the operation completes, use the DescribeTrafficSources API to return details about the state of the attachments between traffic sources and your Auto Scaling group. To detach a traffic source from the Auto Scaling group, call the DetachTrafficSources API.
  
  Parameters:
  
  attachTrafficSourcesRequest -
  
  Returns:
  
  Result of the AttachTrafficSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- attachTrafficSources
  default AttachTrafficSourcesResponse attachTrafficSources(Consumer<AttachTrafficSourcesRequest.Builder> attachTrafficSourcesRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Attaches one or more traffic sources to the specified Auto Scaling group.
  
  You can use any of the following as traffic sources for an Auto Scaling group:
  
  Application Load Balancer
  
  Classic Load Balancer
  
  Gateway Load Balancer
  
  Network Load Balancer
  
  VPC Lattice
  
  This operation is additive and does not detach existing traffic sources from the Auto Scaling group.
  
  After the operation completes, use the DescribeTrafficSources API to return details about the state of the attachments between traffic sources and your Auto Scaling group. To detach a traffic source from the Auto Scaling group, call the DetachTrafficSources API.
  
  This is a convenience which creates an instance of the AttachTrafficSourcesRequest.Builder avoiding the need to create one manually via AttachTrafficSourcesRequest.builder()
  
  Parameters:
  
  attachTrafficSourcesRequest - A Consumer that will call methods on AttachTrafficSourcesRequest.Builder to create a request.
  
  Returns:
  
  Result of the AttachTrafficSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- batchDeleteScheduledAction
  default BatchDeleteScheduledActionResponse batchDeleteScheduledAction(BatchDeleteScheduledActionRequest batchDeleteScheduledActionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes one or more scheduled actions for the specified Auto Scaling group.
  
  Parameters:
  
  batchDeleteScheduledActionRequest -
  
  Returns:
  
  Result of the BatchDeleteScheduledAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- batchDeleteScheduledAction
  default BatchDeleteScheduledActionResponse batchDeleteScheduledAction(Consumer<BatchDeleteScheduledActionRequest.Builder> batchDeleteScheduledActionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes one or more scheduled actions for the specified Auto Scaling group.
  
  This is a convenience which creates an instance of the BatchDeleteScheduledActionRequest.Builder avoiding the need to create one manually via BatchDeleteScheduledActionRequest.builder()
  
  Parameters:
  
  batchDeleteScheduledActionRequest - A Consumer that will call methods on BatchDeleteScheduledActionRequest.Builder to create a request.
  
  Returns:
  
  Result of the BatchDeleteScheduledAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- batchPutScheduledUpdateGroupAction
  default BatchPutScheduledUpdateGroupActionResponse batchPutScheduledUpdateGroupAction(BatchPutScheduledUpdateGroupActionRequest batchPutScheduledUpdateGroupActionRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates one or more scheduled scaling actions for an Auto Scaling group.
  
  Parameters:
  
  batchPutScheduledUpdateGroupActionRequest -
  
  Returns:
  
  Result of the BatchPutScheduledUpdateGroupAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- batchPutScheduledUpdateGroupAction
  default BatchPutScheduledUpdateGroupActionResponse batchPutScheduledUpdateGroupAction(Consumer<BatchPutScheduledUpdateGroupActionRequest.Builder> batchPutScheduledUpdateGroupActionRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates one or more scheduled scaling actions for an Auto Scaling group.
  
  This is a convenience which creates an instance of the BatchPutScheduledUpdateGroupActionRequest.Builder avoiding the need to create one manually via BatchPutScheduledUpdateGroupActionRequest.builder()
  
  Parameters:
  
  batchPutScheduledUpdateGroupActionRequest - A Consumer that will call methods on BatchPutScheduledUpdateGroupActionRequest.Builder to create a request.
  
  Returns:
  
  Result of the BatchPutScheduledUpdateGroupAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- cancelInstanceRefresh
  default CancelInstanceRefreshResponse cancelInstanceRefresh(CancelInstanceRefreshRequest cancelInstanceRefreshRequest) throws LimitExceededException, ResourceContentionException, ActiveInstanceRefreshNotFoundException, AwsServiceException, SdkClientException, AutoScalingException
  
  Cancels an instance refresh or rollback that is in progress. If an instance refresh or rollback is not in progress, an ActiveInstanceRefreshNotFound error occurs.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group after you make configuration changes.
  
  When you cancel an instance refresh, this does not roll back any changes that it made. Use the RollbackInstanceRefresh API to roll back instead.
  
  Parameters:
  
  cancelInstanceRefreshRequest -
  
  Returns:
  
  Result of the CancelInstanceRefresh operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- cancelInstanceRefresh
  default CancelInstanceRefreshResponse cancelInstanceRefresh(Consumer<CancelInstanceRefreshRequest.Builder> cancelInstanceRefreshRequest) throws LimitExceededException, ResourceContentionException, ActiveInstanceRefreshNotFoundException, AwsServiceException, SdkClientException, AutoScalingException
  
  Cancels an instance refresh or rollback that is in progress. If an instance refresh or rollback is not in progress, an ActiveInstanceRefreshNotFound error occurs.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group after you make configuration changes.
  
  When you cancel an instance refresh, this does not roll back any changes that it made. Use the RollbackInstanceRefresh API to roll back instead.
  
  This is a convenience which creates an instance of the CancelInstanceRefreshRequest.Builder avoiding the need to create one manually via CancelInstanceRefreshRequest.builder()
  
  Parameters:
  
  cancelInstanceRefreshRequest - A Consumer that will call methods on CancelInstanceRefreshRequest.Builder to create a request.
  
  Returns:
  
  Result of the CancelInstanceRefresh operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- completeLifecycleAction
  default CompleteLifecycleActionResponse completeLifecycleAction(CompleteLifecycleActionRequest completeLifecycleActionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Completes the lifecycle action for the specified token or instance with the specified result.
  
  This step is a part of the procedure for adding a lifecycle hook to an Auto Scaling group:
  
  (Optional) Create a launch template or launch configuration with a user data script that runs while an instance is in a wait state due to a lifecycle hook.
  
  (Optional) Create a Lambda function and a rule that allows Amazon EventBridge to invoke your Lambda function when an instance is put into a wait state due to a lifecycle hook.
  
  (Optional) Create a notification target and an IAM role. The target can be either an Amazon SQS queue or an Amazon SNS topic. The role allows Amazon EC2 Auto Scaling to publish lifecycle notifications to the target.
  
  Create the lifecycle hook. Specify whether the hook is used when the instances launch or terminate.
  
  If you need more time, record the lifecycle action heartbeat to keep the instance in a wait state.
  
  If you finish before the timeout period ends, send a callback by using the CompleteLifecycleAction API call.
  
  For more information, see Complete a lifecycle action in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  completeLifecycleActionRequest -
  
  Returns:
  
  Result of the CompleteLifecycleAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- completeLifecycleAction
  default CompleteLifecycleActionResponse completeLifecycleAction(Consumer<CompleteLifecycleActionRequest.Builder> completeLifecycleActionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Completes the lifecycle action for the specified token or instance with the specified result.
  
  This step is a part of the procedure for adding a lifecycle hook to an Auto Scaling group:
  
  (Optional) Create a launch template or launch configuration with a user data script that runs while an instance is in a wait state due to a lifecycle hook.
  
  (Optional) Create a Lambda function and a rule that allows Amazon EventBridge to invoke your Lambda function when an instance is put into a wait state due to a lifecycle hook.
  
  (Optional) Create a notification target and an IAM role. The target can be either an Amazon SQS queue or an Amazon SNS topic. The role allows Amazon EC2 Auto Scaling to publish lifecycle notifications to the target.
  
  Create the lifecycle hook. Specify whether the hook is used when the instances launch or terminate.
  
  If you need more time, record the lifecycle action heartbeat to keep the instance in a wait state.
  
  If you finish before the timeout period ends, send a callback by using the CompleteLifecycleAction API call.
  
  For more information, see Complete a lifecycle action in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the CompleteLifecycleActionRequest.Builder avoiding the need to create one manually via CompleteLifecycleActionRequest.builder()
  
  Parameters:
  
  completeLifecycleActionRequest - A Consumer that will call methods on CompleteLifecycleActionRequest.Builder to create a request.
  
  Returns:
  
  Result of the CompleteLifecycleAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAutoScalingGroup
  default CreateAutoScalingGroupResponse createAutoScalingGroup(CreateAutoScalingGroupRequest createAutoScalingGroupRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  We strongly recommend using a launch template when calling this operation to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.
  
  Creates an Auto Scaling group with the specified name and attributes.
  
  If you exceed your maximum limit of Auto Scaling groups, the call fails. To query this limit, call the DescribeAccountLimits API. For information about updating this limit, see Quotas for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  If you're new to Amazon EC2 Auto Scaling, see the introductory tutorials in Get started with Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Every Auto Scaling group has three size properties (DesiredCapacity, MaxSize, and MinSize). Usually, you set these sizes based on a specific number of instances. However, if you configure a mixed instances policy that defines weights for the instance types, you must specify these sizes with the same units that you use for weighting instances.
  
  Parameters:
  
  createAutoScalingGroupRequest -
  
  Returns:
  
  Result of the CreateAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createAutoScalingGroup
  default CreateAutoScalingGroupResponse createAutoScalingGroup(Consumer<CreateAutoScalingGroupRequest.Builder> createAutoScalingGroupRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  We strongly recommend using a launch template when calling this operation to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.
  
  Creates an Auto Scaling group with the specified name and attributes.
  
  If you exceed your maximum limit of Auto Scaling groups, the call fails. To query this limit, call the DescribeAccountLimits API. For information about updating this limit, see Quotas for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  If you're new to Amazon EC2 Auto Scaling, see the introductory tutorials in Get started with Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Every Auto Scaling group has three size properties (DesiredCapacity, MaxSize, and MinSize). Usually, you set these sizes based on a specific number of instances. However, if you configure a mixed instances policy that defines weights for the instance types, you must specify these sizes with the same units that you use for weighting instances.
  
  This is a convenience which creates an instance of the CreateAutoScalingGroupRequest.Builder avoiding the need to create one manually via CreateAutoScalingGroupRequest.builder()
  
  Parameters:
  
  createAutoScalingGroupRequest - A Consumer that will call methods on CreateAutoScalingGroupRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createLaunchConfiguration
  default CreateLaunchConfigurationResponse createLaunchConfiguration(CreateLaunchConfigurationRequest createLaunchConfigurationRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates a launch configuration.
  
  If you exceed your maximum limit of launch configurations, the call fails. To query this limit, call the DescribeAccountLimits API. For information about updating this limit, see Quotas for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  For more information, see Launch configurations in the Amazon EC2 Auto Scaling User Guide.
  
  Amazon EC2 Auto Scaling configures instances launched as part of an Auto Scaling group using either a launch template or a launch configuration. We strongly recommend that you do not use launch configurations. They do not provide full functionality for Amazon EC2 Auto Scaling or Amazon EC2. For information about using launch templates, see Launch templates in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  createLaunchConfigurationRequest -
  
  Returns:
  
  Result of the CreateLaunchConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createLaunchConfiguration
  default CreateLaunchConfigurationResponse createLaunchConfiguration(Consumer<CreateLaunchConfigurationRequest.Builder> createLaunchConfigurationRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates a launch configuration.
  
  If you exceed your maximum limit of launch configurations, the call fails. To query this limit, call the DescribeAccountLimits API. For information about updating this limit, see Quotas for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  For more information, see Launch configurations in the Amazon EC2 Auto Scaling User Guide.
  
  Amazon EC2 Auto Scaling configures instances launched as part of an Auto Scaling group using either a launch template or a launch configuration. We strongly recommend that you do not use launch configurations. They do not provide full functionality for Amazon EC2 Auto Scaling or Amazon EC2. For information about using launch templates, see Launch templates in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the CreateLaunchConfigurationRequest.Builder avoiding the need to create one manually via CreateLaunchConfigurationRequest.builder()
  
  Parameters:
  
  createLaunchConfigurationRequest - A Consumer that will call methods on CreateLaunchConfigurationRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateLaunchConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createOrUpdateTags
  default CreateOrUpdateTagsResponse createOrUpdateTags(CreateOrUpdateTagsRequest createOrUpdateTagsRequest) throws LimitExceededException, AlreadyExistsException, ResourceContentionException, ResourceInUseException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates tags for the specified Auto Scaling group.
  
  When you specify a tag with a key that already exists, the operation overwrites the previous tag definition, and you do not get an error message.
  
  For more information, see Tag Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  createOrUpdateTagsRequest -
  
  Returns:
  
  Result of the CreateOrUpdateTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- createOrUpdateTags
  default CreateOrUpdateTagsResponse createOrUpdateTags(Consumer<CreateOrUpdateTagsRequest.Builder> createOrUpdateTagsRequest) throws LimitExceededException, AlreadyExistsException, ResourceContentionException, ResourceInUseException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates tags for the specified Auto Scaling group.
  
  When you specify a tag with a key that already exists, the operation overwrites the previous tag definition, and you do not get an error message.
  
  For more information, see Tag Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the CreateOrUpdateTagsRequest.Builder avoiding the need to create one manually via CreateOrUpdateTagsRequest.builder()
  
  Parameters:
  
  createOrUpdateTagsRequest - A Consumer that will call methods on CreateOrUpdateTagsRequest.Builder to create a request.
  
  Returns:
  
  Result of the CreateOrUpdateTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAutoScalingGroup
  default DeleteAutoScalingGroupResponse deleteAutoScalingGroup(DeleteAutoScalingGroupRequest deleteAutoScalingGroupRequest) throws ScalingActivityInProgressException, ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified Auto Scaling group.
  
  If the group has instances or scaling activities in progress, you must specify the option to force the deletion in order for it to succeed. The force delete operation will also terminate the EC2 instances. If the group has a warm pool, the force delete option also deletes the warm pool.
  
  To remove instances from the Auto Scaling group before deleting it, call the DetachInstances API with the list of instances and the option to decrement the desired capacity. This ensures that Amazon EC2 Auto Scaling does not launch replacement instances.
  
  To terminate all instances before deleting the Auto Scaling group, call the UpdateAutoScalingGroup API and set the minimum size and desired capacity of the Auto Scaling group to zero.
  
  If the group has scaling policies, deleting the group deletes the policies, the underlying alarm actions, and any alarm that no longer has an associated action.
  
  For more information, see Delete your Auto Scaling infrastructure in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  deleteAutoScalingGroupRequest -
  
  Returns:
  
  Result of the DeleteAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteAutoScalingGroup
  default DeleteAutoScalingGroupResponse deleteAutoScalingGroup(Consumer<DeleteAutoScalingGroupRequest.Builder> deleteAutoScalingGroupRequest) throws ScalingActivityInProgressException, ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified Auto Scaling group.
  
  If the group has instances or scaling activities in progress, you must specify the option to force the deletion in order for it to succeed. The force delete operation will also terminate the EC2 instances. If the group has a warm pool, the force delete option also deletes the warm pool.
  
  To remove instances from the Auto Scaling group before deleting it, call the DetachInstances API with the list of instances and the option to decrement the desired capacity. This ensures that Amazon EC2 Auto Scaling does not launch replacement instances.
  
  To terminate all instances before deleting the Auto Scaling group, call the UpdateAutoScalingGroup API and set the minimum size and desired capacity of the Auto Scaling group to zero.
  
  If the group has scaling policies, deleting the group deletes the policies, the underlying alarm actions, and any alarm that no longer has an associated action.
  
  For more information, see Delete your Auto Scaling infrastructure in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DeleteAutoScalingGroupRequest.Builder avoiding the need to create one manually via DeleteAutoScalingGroupRequest.builder()
  
  Parameters:
  
  deleteAutoScalingGroupRequest - A Consumer that will call methods on DeleteAutoScalingGroupRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteLaunchConfiguration
  default DeleteLaunchConfigurationResponse deleteLaunchConfiguration(DeleteLaunchConfigurationRequest deleteLaunchConfigurationRequest) throws ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified launch configuration.
  
  The launch configuration must not be attached to an Auto Scaling group. When this call completes, the launch configuration is no longer available for use.
  
  Parameters:
  
  deleteLaunchConfigurationRequest -
  
  Returns:
  
  Result of the DeleteLaunchConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteLaunchConfiguration
  default DeleteLaunchConfigurationResponse deleteLaunchConfiguration(Consumer<DeleteLaunchConfigurationRequest.Builder> deleteLaunchConfigurationRequest) throws ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified launch configuration.
  
  The launch configuration must not be attached to an Auto Scaling group. When this call completes, the launch configuration is no longer available for use.
  
  This is a convenience which creates an instance of the DeleteLaunchConfigurationRequest.Builder avoiding the need to create one manually via DeleteLaunchConfigurationRequest.builder()
  
  Parameters:
  
  deleteLaunchConfigurationRequest - A Consumer that will call methods on DeleteLaunchConfigurationRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteLaunchConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteLifecycleHook
  default DeleteLifecycleHookResponse deleteLifecycleHook(DeleteLifecycleHookRequest deleteLifecycleHookRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified lifecycle hook.
  
  If there are any outstanding lifecycle actions, they are completed first (ABANDON for launching instances, CONTINUE for terminating instances).
  
  Parameters:
  
  deleteLifecycleHookRequest -
  
  Returns:
  
  Result of the DeleteLifecycleHook operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteLifecycleHook
  default DeleteLifecycleHookResponse deleteLifecycleHook(Consumer<DeleteLifecycleHookRequest.Builder> deleteLifecycleHookRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified lifecycle hook.
  
  If there are any outstanding lifecycle actions, they are completed first (ABANDON for launching instances, CONTINUE for terminating instances).
  
  This is a convenience which creates an instance of the DeleteLifecycleHookRequest.Builder avoiding the need to create one manually via DeleteLifecycleHookRequest.builder()
  
  Parameters:
  
  deleteLifecycleHookRequest - A Consumer that will call methods on DeleteLifecycleHookRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteLifecycleHook operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteNotificationConfiguration
  default DeleteNotificationConfigurationResponse deleteNotificationConfiguration(DeleteNotificationConfigurationRequest deleteNotificationConfigurationRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified notification.
  
  Parameters:
  
  deleteNotificationConfigurationRequest -
  
  Returns:
  
  Result of the DeleteNotificationConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteNotificationConfiguration
  default DeleteNotificationConfigurationResponse deleteNotificationConfiguration(Consumer<DeleteNotificationConfigurationRequest.Builder> deleteNotificationConfigurationRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified notification.
  
  This is a convenience which creates an instance of the DeleteNotificationConfigurationRequest.Builder avoiding the need to create one manually via DeleteNotificationConfigurationRequest.builder()
  
  Parameters:
  
  deleteNotificationConfigurationRequest - A Consumer that will call methods on DeleteNotificationConfigurationRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteNotificationConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deletePolicy
  default DeletePolicyResponse deletePolicy(DeletePolicyRequest deletePolicyRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified scaling policy.
  
  Deleting either a step scaling policy or a simple scaling policy deletes the underlying alarm action, but does not delete the alarm, even if it no longer has an associated action.
  
  For more information, see Delete a scaling policy in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  deletePolicyRequest -
  
  Returns:
  
  Result of the DeletePolicy operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deletePolicy
  default DeletePolicyResponse deletePolicy(Consumer<DeletePolicyRequest.Builder> deletePolicyRequest) throws ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified scaling policy.
  
  Deleting either a step scaling policy or a simple scaling policy deletes the underlying alarm action, but does not delete the alarm, even if it no longer has an associated action.
  
  For more information, see Delete a scaling policy in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DeletePolicyRequest.Builder avoiding the need to create one manually via DeletePolicyRequest.builder()
  
  Parameters:
  
  deletePolicyRequest - A Consumer that will call methods on DeletePolicyRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeletePolicy operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteScheduledAction
  default DeleteScheduledActionResponse deleteScheduledAction(DeleteScheduledActionRequest deleteScheduledActionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified scheduled action.
  
  Parameters:
  
  deleteScheduledActionRequest -
  
  Returns:
  
  Result of the DeleteScheduledAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteScheduledAction
  default DeleteScheduledActionResponse deleteScheduledAction(Consumer<DeleteScheduledActionRequest.Builder> deleteScheduledActionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified scheduled action.
  
  This is a convenience which creates an instance of the DeleteScheduledActionRequest.Builder avoiding the need to create one manually via DeleteScheduledActionRequest.builder()
  
  Parameters:
  
  deleteScheduledActionRequest - A Consumer that will call methods on DeleteScheduledActionRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteScheduledAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTags
  default DeleteTagsResponse deleteTags(DeleteTagsRequest deleteTagsRequest) throws ResourceContentionException, ResourceInUseException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified tags.
  
  Parameters:
  
  deleteTagsRequest -
  
  Returns:
  
  Result of the DeleteTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteTags
  default DeleteTagsResponse deleteTags(Consumer<DeleteTagsRequest.Builder> deleteTagsRequest) throws ResourceContentionException, ResourceInUseException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the specified tags.
  
  This is a convenience which creates an instance of the DeleteTagsRequest.Builder avoiding the need to create one manually via DeleteTagsRequest.builder()
  
  Parameters:
  
  deleteTagsRequest - A Consumer that will call methods on DeleteTagsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteWarmPool
  default DeleteWarmPoolResponse deleteWarmPool(DeleteWarmPoolRequest deleteWarmPoolRequest) throws LimitExceededException, ResourceContentionException, ScalingActivityInProgressException, ResourceInUseException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the warm pool for the specified Auto Scaling group.
  
  For more information, see Warm pools for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  deleteWarmPoolRequest -
  
  Returns:
  
  Result of the DeleteWarmPool operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- deleteWarmPool
  default DeleteWarmPoolResponse deleteWarmPool(Consumer<DeleteWarmPoolRequest.Builder> deleteWarmPoolRequest) throws LimitExceededException, ResourceContentionException, ScalingActivityInProgressException, ResourceInUseException, AwsServiceException, SdkClientException, AutoScalingException
  
  Deletes the warm pool for the specified Auto Scaling group.
  
  For more information, see Warm pools for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DeleteWarmPoolRequest.Builder avoiding the need to create one manually via DeleteWarmPoolRequest.builder()
  
  Parameters:
  
  deleteWarmPoolRequest - A Consumer that will call methods on DeleteWarmPoolRequest.Builder to create a request.
  
  Returns:
  
  Result of the DeleteWarmPool operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAccountLimits
  default DescribeAccountLimitsResponse describeAccountLimits(DescribeAccountLimitsRequest describeAccountLimitsRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the current Amazon EC2 Auto Scaling resource quotas for your account.
  
  When you establish an Amazon Web Services account, the account has initial quotas on the maximum number of Auto Scaling groups and launch configurations that you can create in a given Region. For more information, see Quotas for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  describeAccountLimitsRequest -
  
  Returns:
  
  Result of the DescribeAccountLimits operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAccountLimits
  default DescribeAccountLimitsResponse describeAccountLimits(Consumer<DescribeAccountLimitsRequest.Builder> describeAccountLimitsRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the current Amazon EC2 Auto Scaling resource quotas for your account.
  
  When you establish an Amazon Web Services account, the account has initial quotas on the maximum number of Auto Scaling groups and launch configurations that you can create in a given Region. For more information, see Quotas for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DescribeAccountLimitsRequest.Builder avoiding the need to create one manually via DescribeAccountLimitsRequest.builder()
  
  Parameters:
  
  describeAccountLimitsRequest - A Consumer that will call methods on DescribeAccountLimitsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeAccountLimits operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAccountLimits
  default DescribeAccountLimitsResponse describeAccountLimits() throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the current Amazon EC2 Auto Scaling resource quotas for your account.
  
  When you establish an Amazon Web Services account, the account has initial quotas on the maximum number of Auto Scaling groups and launch configurations that you can create in a given Region. For more information, see Quotas for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Returns:
  
  Result of the DescribeAccountLimits operation returned by the service.
  
  See Also:
  
  describeAccountLimits(DescribeAccountLimitsRequest)
  
  AWS API Documentation
- describeAdjustmentTypes
  default DescribeAdjustmentTypesResponse describeAdjustmentTypes(DescribeAdjustmentTypesRequest describeAdjustmentTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available adjustment types for step scaling and simple scaling policies.
  
  The following adjustment types are supported:
  
  ChangeInCapacity
  
  ExactCapacity
  
  PercentChangeInCapacity
  
  Parameters:
  
  describeAdjustmentTypesRequest -
  
  Returns:
  
  Result of the DescribeAdjustmentTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAdjustmentTypes
  default DescribeAdjustmentTypesResponse describeAdjustmentTypes(Consumer<DescribeAdjustmentTypesRequest.Builder> describeAdjustmentTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available adjustment types for step scaling and simple scaling policies.
  
  The following adjustment types are supported:
  
  ChangeInCapacity
  
  ExactCapacity
  
  PercentChangeInCapacity
  
  This is a convenience which creates an instance of the DescribeAdjustmentTypesRequest.Builder avoiding the need to create one manually via DescribeAdjustmentTypesRequest.builder()
  
  Parameters:
  
  describeAdjustmentTypesRequest - A Consumer that will call methods on DescribeAdjustmentTypesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeAdjustmentTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAdjustmentTypes
  default DescribeAdjustmentTypesResponse describeAdjustmentTypes() throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available adjustment types for step scaling and simple scaling policies.
  
  The following adjustment types are supported:
  
  ChangeInCapacity
  
  ExactCapacity
  
  PercentChangeInCapacity
  
  Returns:
  
  Result of the DescribeAdjustmentTypes operation returned by the service.
  
  See Also:
  
  describeAdjustmentTypes(DescribeAdjustmentTypesRequest)
  
  AWS API Documentation
- describeAutoScalingGroups
  default DescribeAutoScalingGroupsResponse describeAutoScalingGroups(DescribeAutoScalingGroupsRequest describeAutoScalingGroupsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Auto Scaling groups in the account and Region.
  
  If you specify Auto Scaling group names, the output includes information for only the specified Auto Scaling groups. If you specify filters, the output includes information for only those Auto Scaling groups that meet the filter criteria. If you do not specify group names or filters, the output includes information for all Auto Scaling groups.
  
  This operation also returns information about instances in Auto Scaling groups. To retrieve information about the instances in a warm pool, you must call the DescribeWarmPool API.
  
  Parameters:
  
  describeAutoScalingGroupsRequest -
  
  Returns:
  
  Result of the DescribeAutoScalingGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingGroups
  default DescribeAutoScalingGroupsResponse describeAutoScalingGroups(Consumer<DescribeAutoScalingGroupsRequest.Builder> describeAutoScalingGroupsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Auto Scaling groups in the account and Region.
  
  If you specify Auto Scaling group names, the output includes information for only the specified Auto Scaling groups. If you specify filters, the output includes information for only those Auto Scaling groups that meet the filter criteria. If you do not specify group names or filters, the output includes information for all Auto Scaling groups.
  
  This operation also returns information about instances in Auto Scaling groups. To retrieve information about the instances in a warm pool, you must call the DescribeWarmPool API.
  
  This is a convenience which creates an instance of the DescribeAutoScalingGroupsRequest.Builder avoiding the need to create one manually via DescribeAutoScalingGroupsRequest.builder()
  
  Parameters:
  
  describeAutoScalingGroupsRequest - A Consumer that will call methods on DescribeAutoScalingGroupsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeAutoScalingGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingGroups
  default DescribeAutoScalingGroupsResponse describeAutoScalingGroups() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Auto Scaling groups in the account and Region.
  
  If you specify Auto Scaling group names, the output includes information for only the specified Auto Scaling groups. If you specify filters, the output includes information for only those Auto Scaling groups that meet the filter criteria. If you do not specify group names or filters, the output includes information for all Auto Scaling groups.
  
  This operation also returns information about instances in Auto Scaling groups. To retrieve information about the instances in a warm pool, you must call the DescribeWarmPool API.
  
  Returns:
  
  Result of the DescribeAutoScalingGroups operation returned by the service.
  
  See Also:
  
  describeAutoScalingGroups(DescribeAutoScalingGroupsRequest)
  
  AWS API Documentation
- describeAutoScalingGroupsPaginator
  default DescribeAutoScalingGroupsIterable describeAutoScalingGroupsPaginator() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client.describeAutoScalingGroupsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client .describeAutoScalingGroupsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client.describeAutoScalingGroupsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describeAutoScalingGroupsPaginator(DescribeAutoScalingGroupsRequest)
  
  AWS API Documentation
- describeAutoScalingGroupsPaginator
  default DescribeAutoScalingGroupsIterable describeAutoScalingGroupsPaginator(DescribeAutoScalingGroupsRequest describeAutoScalingGroupsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client.describeAutoScalingGroupsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client .describeAutoScalingGroupsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client.describeAutoScalingGroupsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation.
  
  Parameters:
  
  describeAutoScalingGroupsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingGroupsPaginator
  default DescribeAutoScalingGroupsIterable describeAutoScalingGroupsPaginator(Consumer<DescribeAutoScalingGroupsRequest.Builder> describeAutoScalingGroupsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client.describeAutoScalingGroupsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client .describeAutoScalingGroupsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingGroupsIterable responses = client.describeAutoScalingGroupsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeAutoScalingGroups(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingGroupsRequest) operation.
  
  This is a convenience which creates an instance of the DescribeAutoScalingGroupsRequest.Builder avoiding the need to create one manually via DescribeAutoScalingGroupsRequest.builder()
  
  Parameters:
  
  describeAutoScalingGroupsRequest - A Consumer that will call methods on DescribeAutoScalingGroupsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingInstances
  default DescribeAutoScalingInstancesResponse describeAutoScalingInstances(DescribeAutoScalingInstancesRequest describeAutoScalingInstancesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Auto Scaling instances in the account and Region.
  
  Parameters:
  
  describeAutoScalingInstancesRequest -
  
  Returns:
  
  Result of the DescribeAutoScalingInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingInstances
  default DescribeAutoScalingInstancesResponse describeAutoScalingInstances(Consumer<DescribeAutoScalingInstancesRequest.Builder> describeAutoScalingInstancesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Auto Scaling instances in the account and Region.
  
  This is a convenience which creates an instance of the DescribeAutoScalingInstancesRequest.Builder avoiding the need to create one manually via DescribeAutoScalingInstancesRequest.builder()
  
  Parameters:
  
  describeAutoScalingInstancesRequest - A Consumer that will call methods on DescribeAutoScalingInstancesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeAutoScalingInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingInstances
  default DescribeAutoScalingInstancesResponse describeAutoScalingInstances() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Auto Scaling instances in the account and Region.
  
  Returns:
  
  Result of the DescribeAutoScalingInstances operation returned by the service.
  
  See Also:
  
  describeAutoScalingInstances(DescribeAutoScalingInstancesRequest)
  
  AWS API Documentation
- describeAutoScalingInstancesPaginator
  default DescribeAutoScalingInstancesIterable describeAutoScalingInstancesPaginator() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client.describeAutoScalingInstancesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client .describeAutoScalingInstancesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client.describeAutoScalingInstancesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describeAutoScalingInstancesPaginator(DescribeAutoScalingInstancesRequest)
  
  AWS API Documentation
- describeAutoScalingInstancesPaginator
  default DescribeAutoScalingInstancesIterable describeAutoScalingInstancesPaginator(DescribeAutoScalingInstancesRequest describeAutoScalingInstancesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client.describeAutoScalingInstancesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client .describeAutoScalingInstancesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client.describeAutoScalingInstancesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation.
  
  Parameters:
  
  describeAutoScalingInstancesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingInstancesPaginator
  default DescribeAutoScalingInstancesIterable describeAutoScalingInstancesPaginator(Consumer<DescribeAutoScalingInstancesRequest.Builder> describeAutoScalingInstancesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client.describeAutoScalingInstancesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client .describeAutoScalingInstancesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeAutoScalingInstancesIterable responses = client.describeAutoScalingInstancesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeAutoScalingInstances(software.amazon.awssdk.services.autoscaling.model.DescribeAutoScalingInstancesRequest) operation.
  
  This is a convenience which creates an instance of the DescribeAutoScalingInstancesRequest.Builder avoiding the need to create one manually via DescribeAutoScalingInstancesRequest.builder()
  
  Parameters:
  
  describeAutoScalingInstancesRequest - A Consumer that will call methods on DescribeAutoScalingInstancesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingNotificationTypes
  default DescribeAutoScalingNotificationTypesResponse describeAutoScalingNotificationTypes(DescribeAutoScalingNotificationTypesRequest describeAutoScalingNotificationTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the notification types that are supported by Amazon EC2 Auto Scaling.
  
  Parameters:
  
  describeAutoScalingNotificationTypesRequest -
  
  Returns:
  
  Result of the DescribeAutoScalingNotificationTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingNotificationTypes
  default DescribeAutoScalingNotificationTypesResponse describeAutoScalingNotificationTypes(Consumer<DescribeAutoScalingNotificationTypesRequest.Builder> describeAutoScalingNotificationTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the notification types that are supported by Amazon EC2 Auto Scaling.
  
  This is a convenience which creates an instance of the DescribeAutoScalingNotificationTypesRequest.Builder avoiding the need to create one manually via DescribeAutoScalingNotificationTypesRequest.builder()
  
  Parameters:
  
  describeAutoScalingNotificationTypesRequest - A Consumer that will call methods on DescribeAutoScalingNotificationTypesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeAutoScalingNotificationTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeAutoScalingNotificationTypes
  default DescribeAutoScalingNotificationTypesResponse describeAutoScalingNotificationTypes() throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the notification types that are supported by Amazon EC2 Auto Scaling.
  
  Returns:
  
  Result of the DescribeAutoScalingNotificationTypes operation returned by the service.
  
  See Also:
  
  describeAutoScalingNotificationTypes(DescribeAutoScalingNotificationTypesRequest)
  
  AWS API Documentation
- describeInstanceRefreshes
  default DescribeInstanceRefreshesResponse describeInstanceRefreshes(DescribeInstanceRefreshesRequest describeInstanceRefreshesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the instance refreshes for the specified Auto Scaling group from the previous six weeks.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group after you make configuration changes.
  
  To help you determine the status of an instance refresh, Amazon EC2 Auto Scaling returns information about the instance refreshes you previously initiated, including their status, start time, end time, the percentage of the instance refresh that is complete, and the number of instances remaining to update before the instance refresh is complete. If a rollback is initiated while an instance refresh is in progress, Amazon EC2 Auto Scaling also returns information about the rollback of the instance refresh.
  
  Parameters:
  
  describeInstanceRefreshesRequest -
  
  Returns:
  
  Result of the DescribeInstanceRefreshes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeInstanceRefreshes
  default DescribeInstanceRefreshesResponse describeInstanceRefreshes(Consumer<DescribeInstanceRefreshesRequest.Builder> describeInstanceRefreshesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the instance refreshes for the specified Auto Scaling group from the previous six weeks.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group after you make configuration changes.
  
  To help you determine the status of an instance refresh, Amazon EC2 Auto Scaling returns information about the instance refreshes you previously initiated, including their status, start time, end time, the percentage of the instance refresh that is complete, and the number of instances remaining to update before the instance refresh is complete. If a rollback is initiated while an instance refresh is in progress, Amazon EC2 Auto Scaling also returns information about the rollback of the instance refresh.
  
  This is a convenience which creates an instance of the DescribeInstanceRefreshesRequest.Builder avoiding the need to create one manually via DescribeInstanceRefreshesRequest.builder()
  
  Parameters:
  
  describeInstanceRefreshesRequest - A Consumer that will call methods on DescribeInstanceRefreshesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeInstanceRefreshes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeInstanceRefreshesPaginator
  default DescribeInstanceRefreshesIterable describeInstanceRefreshesPaginator(DescribeInstanceRefreshesRequest describeInstanceRefreshesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeInstanceRefreshes(software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeInstanceRefreshesIterable responses = client.describeInstanceRefreshesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeInstanceRefreshesIterable responses = client .describeInstanceRefreshesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeInstanceRefreshesIterable responses = client.describeInstanceRefreshesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeInstanceRefreshes(software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesRequest) operation.
  
  Parameters:
  
  describeInstanceRefreshesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeInstanceRefreshesPaginator
  default DescribeInstanceRefreshesIterable describeInstanceRefreshesPaginator(Consumer<DescribeInstanceRefreshesRequest.Builder> describeInstanceRefreshesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeInstanceRefreshes(software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeInstanceRefreshesIterable responses = client.describeInstanceRefreshesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeInstanceRefreshesIterable responses = client .describeInstanceRefreshesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeInstanceRefreshesIterable responses = client.describeInstanceRefreshesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeInstanceRefreshes(software.amazon.awssdk.services.autoscaling.model.DescribeInstanceRefreshesRequest) operation.
  
  This is a convenience which creates an instance of the DescribeInstanceRefreshesRequest.Builder avoiding the need to create one manually via DescribeInstanceRefreshesRequest.builder()
  
  Parameters:
  
  describeInstanceRefreshesRequest - A Consumer that will call methods on DescribeInstanceRefreshesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeLaunchConfigurations
  default DescribeLaunchConfigurationsResponse describeLaunchConfigurations(DescribeLaunchConfigurationsRequest describeLaunchConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the launch configurations in the account and Region.
  
  Parameters:
  
  describeLaunchConfigurationsRequest -
  
  Returns:
  
  Result of the DescribeLaunchConfigurations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLaunchConfigurations
  default DescribeLaunchConfigurationsResponse describeLaunchConfigurations(Consumer<DescribeLaunchConfigurationsRequest.Builder> describeLaunchConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the launch configurations in the account and Region.
  
  This is a convenience which creates an instance of the DescribeLaunchConfigurationsRequest.Builder avoiding the need to create one manually via DescribeLaunchConfigurationsRequest.builder()
  
  Parameters:
  
  describeLaunchConfigurationsRequest - A Consumer that will call methods on DescribeLaunchConfigurationsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLaunchConfigurations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLaunchConfigurations
  default DescribeLaunchConfigurationsResponse describeLaunchConfigurations() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the launch configurations in the account and Region.
  
  Returns:
  
  Result of the DescribeLaunchConfigurations operation returned by the service.
  
  See Also:
  
  describeLaunchConfigurations(DescribeLaunchConfigurationsRequest)
  
  AWS API Documentation
- describeLaunchConfigurationsPaginator
  default DescribeLaunchConfigurationsIterable describeLaunchConfigurationsPaginator() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client.describeLaunchConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client .describeLaunchConfigurationsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client.describeLaunchConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describeLaunchConfigurationsPaginator(DescribeLaunchConfigurationsRequest)
  
  AWS API Documentation
- describeLaunchConfigurationsPaginator
  default DescribeLaunchConfigurationsIterable describeLaunchConfigurationsPaginator(DescribeLaunchConfigurationsRequest describeLaunchConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client.describeLaunchConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client .describeLaunchConfigurationsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client.describeLaunchConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation.
  
  Parameters:
  
  describeLaunchConfigurationsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeLaunchConfigurationsPaginator
  default DescribeLaunchConfigurationsIterable describeLaunchConfigurationsPaginator(Consumer<DescribeLaunchConfigurationsRequest.Builder> describeLaunchConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client.describeLaunchConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client .describeLaunchConfigurationsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLaunchConfigurationsIterable responses = client.describeLaunchConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeLaunchConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeLaunchConfigurationsRequest) operation.
  
  This is a convenience which creates an instance of the DescribeLaunchConfigurationsRequest.Builder avoiding the need to create one manually via DescribeLaunchConfigurationsRequest.builder()
  
  Parameters:
  
  describeLaunchConfigurationsRequest - A Consumer that will call methods on DescribeLaunchConfigurationsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeLifecycleHookTypes
  default DescribeLifecycleHookTypesResponse describeLifecycleHookTypes(DescribeLifecycleHookTypesRequest describeLifecycleHookTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available types of lifecycle hooks.
  
  The following hook types are supported:
  
  autoscaling:EC2_INSTANCE_LAUNCHING
  
  autoscaling:EC2_INSTANCE_TERMINATING
  
  Parameters:
  
  describeLifecycleHookTypesRequest -
  
  Returns:
  
  Result of the DescribeLifecycleHookTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLifecycleHookTypes
  default DescribeLifecycleHookTypesResponse describeLifecycleHookTypes(Consumer<DescribeLifecycleHookTypesRequest.Builder> describeLifecycleHookTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available types of lifecycle hooks.
  
  The following hook types are supported:
  
  autoscaling:EC2_INSTANCE_LAUNCHING
  
  autoscaling:EC2_INSTANCE_TERMINATING
  
  This is a convenience which creates an instance of the DescribeLifecycleHookTypesRequest.Builder avoiding the need to create one manually via DescribeLifecycleHookTypesRequest.builder()
  
  Parameters:
  
  describeLifecycleHookTypesRequest - A Consumer that will call methods on DescribeLifecycleHookTypesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLifecycleHookTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLifecycleHookTypes
  default DescribeLifecycleHookTypesResponse describeLifecycleHookTypes() throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available types of lifecycle hooks.
  
  The following hook types are supported:
  
  autoscaling:EC2_INSTANCE_LAUNCHING
  
  autoscaling:EC2_INSTANCE_TERMINATING
  
  Returns:
  
  Result of the DescribeLifecycleHookTypes operation returned by the service.
  
  See Also:
  
  describeLifecycleHookTypes(DescribeLifecycleHookTypesRequest)
  
  AWS API Documentation
- describeLifecycleHooks
  default DescribeLifecycleHooksResponse describeLifecycleHooks(DescribeLifecycleHooksRequest describeLifecycleHooksRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the lifecycle hooks for the specified Auto Scaling group.
  
  Parameters:
  
  describeLifecycleHooksRequest -
  
  Returns:
  
  Result of the DescribeLifecycleHooks operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLifecycleHooks
  default DescribeLifecycleHooksResponse describeLifecycleHooks(Consumer<DescribeLifecycleHooksRequest.Builder> describeLifecycleHooksRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the lifecycle hooks for the specified Auto Scaling group.
  
  This is a convenience which creates an instance of the DescribeLifecycleHooksRequest.Builder avoiding the need to create one manually via DescribeLifecycleHooksRequest.builder()
  
  Parameters:
  
  describeLifecycleHooksRequest - A Consumer that will call methods on DescribeLifecycleHooksRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLifecycleHooks operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancerTargetGroups
  default DescribeLoadBalancerTargetGroupsResponse describeLoadBalancerTargetGroups(DescribeLoadBalancerTargetGroupsRequest describeLoadBalancerTargetGroupsRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DescribeTrafficSources, which can describe multiple traffic sources types. We recommend using DetachTrafficSources to simplify how you manage traffic sources. However, we continue to support DescribeLoadBalancerTargetGroups. You can use both the original DescribeLoadBalancerTargetGroups API operation and DescribeTrafficSources on the same Auto Scaling group.
  
  Gets information about the Elastic Load Balancing target groups for the specified Auto Scaling group.
  
  To determine the attachment status of the target group, use the State element in the response. When you attach a target group to an Auto Scaling group, the initial State value is Adding. The state transitions to Added after all Auto Scaling instances are registered with the target group. If Elastic Load Balancing health checks are enabled for the Auto Scaling group, the state transitions to InService after at least one Auto Scaling instance passes the health check. When the target group is in the InService state, Amazon EC2 Auto Scaling can terminate and replace any instances that are reported as unhealthy. If no registered instances pass the health checks, the target group doesn't enter the InService state.
  
  Target groups also have an InService state if you attach them in the CreateAutoScalingGroup API call. If your target group state is InService, but it is not working properly, check the scaling activities by calling DescribeScalingActivities and take any corrective actions necessary.
  
  For help with failed health checks, see Troubleshooting Amazon EC2 Auto Scaling: Health checks in the Amazon EC2 Auto Scaling User Guide. For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  You can use this operation to describe target groups that were attached by using AttachLoadBalancerTargetGroups, but not for target groups that were attached by using AttachTrafficSources.
  
  Parameters:
  
  describeLoadBalancerTargetGroupsRequest -
  
  Returns:
  
  Result of the DescribeLoadBalancerTargetGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancerTargetGroups
  default DescribeLoadBalancerTargetGroupsResponse describeLoadBalancerTargetGroups(Consumer<DescribeLoadBalancerTargetGroupsRequest.Builder> describeLoadBalancerTargetGroupsRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DescribeTrafficSources, which can describe multiple traffic sources types. We recommend using DetachTrafficSources to simplify how you manage traffic sources. However, we continue to support DescribeLoadBalancerTargetGroups. You can use both the original DescribeLoadBalancerTargetGroups API operation and DescribeTrafficSources on the same Auto Scaling group.
  
  Gets information about the Elastic Load Balancing target groups for the specified Auto Scaling group.
  
  To determine the attachment status of the target group, use the State element in the response. When you attach a target group to an Auto Scaling group, the initial State value is Adding. The state transitions to Added after all Auto Scaling instances are registered with the target group. If Elastic Load Balancing health checks are enabled for the Auto Scaling group, the state transitions to InService after at least one Auto Scaling instance passes the health check. When the target group is in the InService state, Amazon EC2 Auto Scaling can terminate and replace any instances that are reported as unhealthy. If no registered instances pass the health checks, the target group doesn't enter the InService state.
  
  Target groups also have an InService state if you attach them in the CreateAutoScalingGroup API call. If your target group state is InService, but it is not working properly, check the scaling activities by calling DescribeScalingActivities and take any corrective actions necessary.
  
  For help with failed health checks, see Troubleshooting Amazon EC2 Auto Scaling: Health checks in the Amazon EC2 Auto Scaling User Guide. For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  You can use this operation to describe target groups that were attached by using AttachLoadBalancerTargetGroups, but not for target groups that were attached by using AttachTrafficSources.
  
  This is a convenience which creates an instance of the DescribeLoadBalancerTargetGroupsRequest.Builder avoiding the need to create one manually via DescribeLoadBalancerTargetGroupsRequest.builder()
  
  Parameters:
  
  describeLoadBalancerTargetGroupsRequest - A Consumer that will call methods on DescribeLoadBalancerTargetGroupsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLoadBalancerTargetGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancerTargetGroupsPaginator
  default DescribeLoadBalancerTargetGroupsIterable describeLoadBalancerTargetGroupsPaginator(DescribeLoadBalancerTargetGroupsRequest describeLoadBalancerTargetGroupsRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeLoadBalancerTargetGroups(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancerTargetGroupsIterable responses = client.describeLoadBalancerTargetGroupsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancerTargetGroupsIterable responses = client .describeLoadBalancerTargetGroupsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancerTargetGroupsIterable responses = client.describeLoadBalancerTargetGroupsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeLoadBalancerTargetGroups(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsRequest) operation.
  
  Parameters:
  
  describeLoadBalancerTargetGroupsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancerTargetGroupsPaginator
  default DescribeLoadBalancerTargetGroupsIterable describeLoadBalancerTargetGroupsPaginator(Consumer<DescribeLoadBalancerTargetGroupsRequest.Builder> describeLoadBalancerTargetGroupsRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeLoadBalancerTargetGroups(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancerTargetGroupsIterable responses = client.describeLoadBalancerTargetGroupsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancerTargetGroupsIterable responses = client .describeLoadBalancerTargetGroupsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancerTargetGroupsIterable responses = client.describeLoadBalancerTargetGroupsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeLoadBalancerTargetGroups(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancerTargetGroupsRequest) operation.
  
  This is a convenience which creates an instance of the DescribeLoadBalancerTargetGroupsRequest.Builder avoiding the need to create one manually via DescribeLoadBalancerTargetGroupsRequest.builder()
  
  Parameters:
  
  describeLoadBalancerTargetGroupsRequest - A Consumer that will call methods on DescribeLoadBalancerTargetGroupsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancers
  default DescribeLoadBalancersResponse describeLoadBalancers(DescribeLoadBalancersRequest describeLoadBalancersRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DescribeTrafficSources, which can describe multiple traffic sources types. We recommend using DescribeTrafficSources to simplify how you manage traffic sources. However, we continue to support DescribeLoadBalancers. You can use both the original DescribeLoadBalancers API operation and DescribeTrafficSources on the same Auto Scaling group.
  
  Gets information about the load balancers for the specified Auto Scaling group.
  
  This operation describes only Classic Load Balancers. If you have Application Load Balancers, Network Load Balancers, or Gateway Load Balancers, use the DescribeLoadBalancerTargetGroups API instead.
  
  To determine the attachment status of the load balancer, use the State element in the response. When you attach a load balancer to an Auto Scaling group, the initial State value is Adding. The state transitions to Added after all Auto Scaling instances are registered with the load balancer. If Elastic Load Balancing health checks are enabled for the Auto Scaling group, the state transitions to InService after at least one Auto Scaling instance passes the health check. When the load balancer is in the InService state, Amazon EC2 Auto Scaling can terminate and replace any instances that are reported as unhealthy. If no registered instances pass the health checks, the load balancer doesn't enter the InService state.
  
  Load balancers also have an InService state if you attach them in the CreateAutoScalingGroup API call. If your load balancer state is InService, but it is not working properly, check the scaling activities by calling DescribeScalingActivities and take any corrective actions necessary.
  
  For help with failed health checks, see Troubleshooting Amazon EC2 Auto Scaling: Health checks in the Amazon EC2 Auto Scaling User Guide. For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  describeLoadBalancersRequest -
  
  Returns:
  
  Result of the DescribeLoadBalancers operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancers
  default DescribeLoadBalancersResponse describeLoadBalancers(Consumer<DescribeLoadBalancersRequest.Builder> describeLoadBalancersRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DescribeTrafficSources, which can describe multiple traffic sources types. We recommend using DescribeTrafficSources to simplify how you manage traffic sources. However, we continue to support DescribeLoadBalancers. You can use both the original DescribeLoadBalancers API operation and DescribeTrafficSources on the same Auto Scaling group.
  
  Gets information about the load balancers for the specified Auto Scaling group.
  
  This operation describes only Classic Load Balancers. If you have Application Load Balancers, Network Load Balancers, or Gateway Load Balancers, use the DescribeLoadBalancerTargetGroups API instead.
  
  To determine the attachment status of the load balancer, use the State element in the response. When you attach a load balancer to an Auto Scaling group, the initial State value is Adding. The state transitions to Added after all Auto Scaling instances are registered with the load balancer. If Elastic Load Balancing health checks are enabled for the Auto Scaling group, the state transitions to InService after at least one Auto Scaling instance passes the health check. When the load balancer is in the InService state, Amazon EC2 Auto Scaling can terminate and replace any instances that are reported as unhealthy. If no registered instances pass the health checks, the load balancer doesn't enter the InService state.
  
  Load balancers also have an InService state if you attach them in the CreateAutoScalingGroup API call. If your load balancer state is InService, but it is not working properly, check the scaling activities by calling DescribeScalingActivities and take any corrective actions necessary.
  
  For help with failed health checks, see Troubleshooting Amazon EC2 Auto Scaling: Health checks in the Amazon EC2 Auto Scaling User Guide. For more information, see Use Elastic Load Balancing to distribute traffic across the instances in your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DescribeLoadBalancersRequest.Builder avoiding the need to create one manually via DescribeLoadBalancersRequest.builder()
  
  Parameters:
  
  describeLoadBalancersRequest - A Consumer that will call methods on DescribeLoadBalancersRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeLoadBalancers operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancersPaginator
  default DescribeLoadBalancersIterable describeLoadBalancersPaginator(DescribeLoadBalancersRequest describeLoadBalancersRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeLoadBalancers(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancersIterable responses = client.describeLoadBalancersPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancersIterable responses = client .describeLoadBalancersPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancersIterable responses = client.describeLoadBalancersPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeLoadBalancers(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersRequest) operation.
  
  Parameters:
  
  describeLoadBalancersRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeLoadBalancersPaginator
  default DescribeLoadBalancersIterable describeLoadBalancersPaginator(Consumer<DescribeLoadBalancersRequest.Builder> describeLoadBalancersRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeLoadBalancers(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancersIterable responses = client.describeLoadBalancersPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancersIterable responses = client .describeLoadBalancersPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeLoadBalancersIterable responses = client.describeLoadBalancersPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeLoadBalancers(software.amazon.awssdk.services.autoscaling.model.DescribeLoadBalancersRequest) operation.
  
  This is a convenience which creates an instance of the DescribeLoadBalancersRequest.Builder avoiding the need to create one manually via DescribeLoadBalancersRequest.builder()
  
  Parameters:
  
  describeLoadBalancersRequest - A Consumer that will call methods on DescribeLoadBalancersRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeMetricCollectionTypes
  default DescribeMetricCollectionTypesResponse describeMetricCollectionTypes(DescribeMetricCollectionTypesRequest describeMetricCollectionTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available CloudWatch metrics for Amazon EC2 Auto Scaling.
  
  Parameters:
  
  describeMetricCollectionTypesRequest -
  
  Returns:
  
  Result of the DescribeMetricCollectionTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeMetricCollectionTypes
  default DescribeMetricCollectionTypesResponse describeMetricCollectionTypes(Consumer<DescribeMetricCollectionTypesRequest.Builder> describeMetricCollectionTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available CloudWatch metrics for Amazon EC2 Auto Scaling.
  
  This is a convenience which creates an instance of the DescribeMetricCollectionTypesRequest.Builder avoiding the need to create one manually via DescribeMetricCollectionTypesRequest.builder()
  
  Parameters:
  
  describeMetricCollectionTypesRequest - A Consumer that will call methods on DescribeMetricCollectionTypesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeMetricCollectionTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeMetricCollectionTypes
  default DescribeMetricCollectionTypesResponse describeMetricCollectionTypes() throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the available CloudWatch metrics for Amazon EC2 Auto Scaling.
  
  Returns:
  
  Result of the DescribeMetricCollectionTypes operation returned by the service.
  
  See Also:
  
  describeMetricCollectionTypes(DescribeMetricCollectionTypesRequest)
  
  AWS API Documentation
- describeNotificationConfigurations
  default DescribeNotificationConfigurationsResponse describeNotificationConfigurations(DescribeNotificationConfigurationsRequest describeNotificationConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Amazon SNS notifications that are configured for one or more Auto Scaling groups.
  
  Parameters:
  
  describeNotificationConfigurationsRequest -
  
  Returns:
  
  Result of the DescribeNotificationConfigurations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeNotificationConfigurations
  default DescribeNotificationConfigurationsResponse describeNotificationConfigurations(Consumer<DescribeNotificationConfigurationsRequest.Builder> describeNotificationConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Amazon SNS notifications that are configured for one or more Auto Scaling groups.
  
  This is a convenience which creates an instance of the DescribeNotificationConfigurationsRequest.Builder avoiding the need to create one manually via DescribeNotificationConfigurationsRequest.builder()
  
  Parameters:
  
  describeNotificationConfigurationsRequest - A Consumer that will call methods on DescribeNotificationConfigurationsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeNotificationConfigurations operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeNotificationConfigurations
  default DescribeNotificationConfigurationsResponse describeNotificationConfigurations() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the Amazon SNS notifications that are configured for one or more Auto Scaling groups.
  
  Returns:
  
  Result of the DescribeNotificationConfigurations operation returned by the service.
  
  See Also:
  
  describeNotificationConfigurations(DescribeNotificationConfigurationsRequest)
  
  AWS API Documentation
- describeNotificationConfigurationsPaginator
  default DescribeNotificationConfigurationsIterable describeNotificationConfigurationsPaginator() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client.describeNotificationConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client .describeNotificationConfigurationsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client.describeNotificationConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describeNotificationConfigurationsPaginator(DescribeNotificationConfigurationsRequest)
  
  AWS API Documentation
- describeNotificationConfigurationsPaginator
  default DescribeNotificationConfigurationsIterable describeNotificationConfigurationsPaginator(DescribeNotificationConfigurationsRequest describeNotificationConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client.describeNotificationConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client .describeNotificationConfigurationsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client.describeNotificationConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation.
  
  Parameters:
  
  describeNotificationConfigurationsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeNotificationConfigurationsPaginator
  default DescribeNotificationConfigurationsIterable describeNotificationConfigurationsPaginator(Consumer<DescribeNotificationConfigurationsRequest.Builder> describeNotificationConfigurationsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client.describeNotificationConfigurationsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client .describeNotificationConfigurationsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeNotificationConfigurationsIterable responses = client.describeNotificationConfigurationsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeNotificationConfigurations(software.amazon.awssdk.services.autoscaling.model.DescribeNotificationConfigurationsRequest) operation.
  
  This is a convenience which creates an instance of the DescribeNotificationConfigurationsRequest.Builder avoiding the need to create one manually via DescribeNotificationConfigurationsRequest.builder()
  
  Parameters:
  
  describeNotificationConfigurationsRequest - A Consumer that will call methods on DescribeNotificationConfigurationsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describePolicies
  default DescribePoliciesResponse describePolicies(DescribePoliciesRequest describePoliciesRequest) throws InvalidNextTokenException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scaling policies in the account and Region.
  
  Parameters:
  
  describePoliciesRequest -
  
  Returns:
  
  Result of the DescribePolicies operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describePolicies
  default DescribePoliciesResponse describePolicies(Consumer<DescribePoliciesRequest.Builder> describePoliciesRequest) throws InvalidNextTokenException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scaling policies in the account and Region.
  
  This is a convenience which creates an instance of the DescribePoliciesRequest.Builder avoiding the need to create one manually via DescribePoliciesRequest.builder()
  
  Parameters:
  
  describePoliciesRequest - A Consumer that will call methods on DescribePoliciesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribePolicies operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describePolicies
  default DescribePoliciesResponse describePolicies() throws InvalidNextTokenException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scaling policies in the account and Region.
  
  Returns:
  
  Result of the DescribePolicies operation returned by the service.
  
  See Also:
  
  describePolicies(DescribePoliciesRequest)
  
  AWS API Documentation
- describePoliciesPaginator
  default DescribePoliciesIterable describePoliciesPaginator() throws InvalidNextTokenException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client.describePoliciesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client .describePoliciesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribePoliciesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client.describePoliciesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describePoliciesPaginator(DescribePoliciesRequest)
  
  AWS API Documentation
- describePoliciesPaginator
  default DescribePoliciesIterable describePoliciesPaginator(DescribePoliciesRequest describePoliciesRequest) throws InvalidNextTokenException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client.describePoliciesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client .describePoliciesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribePoliciesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client.describePoliciesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation.
  
  Parameters:
  
  describePoliciesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describePoliciesPaginator
  default DescribePoliciesIterable describePoliciesPaginator(Consumer<DescribePoliciesRequest.Builder> describePoliciesRequest) throws InvalidNextTokenException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client.describePoliciesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client .describePoliciesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribePoliciesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribePoliciesIterable responses = client.describePoliciesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describePolicies(software.amazon.awssdk.services.autoscaling.model.DescribePoliciesRequest) operation.
  
  This is a convenience which creates an instance of the DescribePoliciesRequest.Builder avoiding the need to create one manually via DescribePoliciesRequest.builder()
  
  Parameters:
  
  describePoliciesRequest - A Consumer that will call methods on DescribePoliciesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeScalingActivities
  default DescribeScalingActivitiesResponse describeScalingActivities(DescribeScalingActivitiesRequest describeScalingActivitiesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scaling activities in the account and Region.
  
  When scaling events occur, you see a record of the scaling activity in the scaling activities. For more information, see Verify a scaling activity for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  If the scaling event succeeds, the value of the StatusCode element in the response is Successful. If an attempt to launch instances failed, the StatusCode value is Failed or Cancelled and the StatusMessage element in the response indicates the cause of the failure. For help interpreting the StatusMessage, see Troubleshooting Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  describeScalingActivitiesRequest -
  
  Returns:
  
  Result of the DescribeScalingActivities operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeScalingActivities
  default DescribeScalingActivitiesResponse describeScalingActivities(Consumer<DescribeScalingActivitiesRequest.Builder> describeScalingActivitiesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scaling activities in the account and Region.
  
  When scaling events occur, you see a record of the scaling activity in the scaling activities. For more information, see Verify a scaling activity for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  If the scaling event succeeds, the value of the StatusCode element in the response is Successful. If an attempt to launch instances failed, the StatusCode value is Failed or Cancelled and the StatusMessage element in the response indicates the cause of the failure. For help interpreting the StatusMessage, see Troubleshooting Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DescribeScalingActivitiesRequest.Builder avoiding the need to create one manually via DescribeScalingActivitiesRequest.builder()
  
  Parameters:
  
  describeScalingActivitiesRequest - A Consumer that will call methods on DescribeScalingActivitiesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeScalingActivities operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeScalingActivities
  default DescribeScalingActivitiesResponse describeScalingActivities() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scaling activities in the account and Region.
  
  When scaling events occur, you see a record of the scaling activity in the scaling activities. For more information, see Verify a scaling activity for an Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  If the scaling event succeeds, the value of the StatusCode element in the response is Successful. If an attempt to launch instances failed, the StatusCode value is Failed or Cancelled and the StatusMessage element in the response indicates the cause of the failure. For help interpreting the StatusMessage, see Troubleshooting Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Returns:
  
  Result of the DescribeScalingActivities operation returned by the service.
  
  See Also:
  
  describeScalingActivities(DescribeScalingActivitiesRequest)
  
  AWS API Documentation
- describeScalingActivitiesPaginator
  default DescribeScalingActivitiesIterable describeScalingActivitiesPaginator() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client.describeScalingActivitiesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client .describeScalingActivitiesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client.describeScalingActivitiesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describeScalingActivitiesPaginator(DescribeScalingActivitiesRequest)
  
  AWS API Documentation
- describeScalingActivitiesPaginator
  default DescribeScalingActivitiesIterable describeScalingActivitiesPaginator(DescribeScalingActivitiesRequest describeScalingActivitiesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client.describeScalingActivitiesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client .describeScalingActivitiesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client.describeScalingActivitiesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation.
  
  Parameters:
  
  describeScalingActivitiesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeScalingActivitiesPaginator
  default DescribeScalingActivitiesIterable describeScalingActivitiesPaginator(Consumer<DescribeScalingActivitiesRequest.Builder> describeScalingActivitiesRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client.describeScalingActivitiesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client .describeScalingActivitiesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScalingActivitiesIterable responses = client.describeScalingActivitiesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeScalingActivities(software.amazon.awssdk.services.autoscaling.model.DescribeScalingActivitiesRequest) operation.
  
  This is a convenience which creates an instance of the DescribeScalingActivitiesRequest.Builder avoiding the need to create one manually via DescribeScalingActivitiesRequest.builder()
  
  Parameters:
  
  describeScalingActivitiesRequest - A Consumer that will call methods on DescribeScalingActivitiesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeScalingProcessTypes
  default DescribeScalingProcessTypesResponse describeScalingProcessTypes(DescribeScalingProcessTypesRequest describeScalingProcessTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the scaling process types for use with the ResumeProcesses and SuspendProcesses APIs.
  
  Parameters:
  
  describeScalingProcessTypesRequest -
  
  Returns:
  
  Result of the DescribeScalingProcessTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeScalingProcessTypes
  default DescribeScalingProcessTypesResponse describeScalingProcessTypes(Consumer<DescribeScalingProcessTypesRequest.Builder> describeScalingProcessTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the scaling process types for use with the ResumeProcesses and SuspendProcesses APIs.
  
  This is a convenience which creates an instance of the DescribeScalingProcessTypesRequest.Builder avoiding the need to create one manually via DescribeScalingProcessTypesRequest.builder()
  
  Parameters:
  
  describeScalingProcessTypesRequest - A Consumer that will call methods on DescribeScalingProcessTypesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeScalingProcessTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeScalingProcessTypes
  default DescribeScalingProcessTypesResponse describeScalingProcessTypes() throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the scaling process types for use with the ResumeProcesses and SuspendProcesses APIs.
  
  Returns:
  
  Result of the DescribeScalingProcessTypes operation returned by the service.
  
  See Also:
  
  describeScalingProcessTypes(DescribeScalingProcessTypesRequest)
  
  AWS API Documentation
- describeScheduledActions
  default DescribeScheduledActionsResponse describeScheduledActions(DescribeScheduledActionsRequest describeScheduledActionsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scheduled actions that haven't run or that have not reached their end time.
  
  To describe the scaling activities for scheduled actions that have already run, call the DescribeScalingActivities API.
  
  Parameters:
  
  describeScheduledActionsRequest -
  
  Returns:
  
  Result of the DescribeScheduledActions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeScheduledActions
  default DescribeScheduledActionsResponse describeScheduledActions(Consumer<DescribeScheduledActionsRequest.Builder> describeScheduledActionsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scheduled actions that haven't run or that have not reached their end time.
  
  To describe the scaling activities for scheduled actions that have already run, call the DescribeScalingActivities API.
  
  This is a convenience which creates an instance of the DescribeScheduledActionsRequest.Builder avoiding the need to create one manually via DescribeScheduledActionsRequest.builder()
  
  Parameters:
  
  describeScheduledActionsRequest - A Consumer that will call methods on DescribeScheduledActionsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeScheduledActions operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeScheduledActions
  default DescribeScheduledActionsResponse describeScheduledActions() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the scheduled actions that haven't run or that have not reached their end time.
  
  To describe the scaling activities for scheduled actions that have already run, call the DescribeScalingActivities API.
  
  Returns:
  
  Result of the DescribeScheduledActions operation returned by the service.
  
  See Also:
  
  describeScheduledActions(DescribeScheduledActionsRequest)
  
  AWS API Documentation
- describeScheduledActionsPaginator
  default DescribeScheduledActionsIterable describeScheduledActionsPaginator() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client.describeScheduledActionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client .describeScheduledActionsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client.describeScheduledActionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describeScheduledActionsPaginator(DescribeScheduledActionsRequest)
  
  AWS API Documentation
- describeScheduledActionsPaginator
  default DescribeScheduledActionsIterable describeScheduledActionsPaginator(DescribeScheduledActionsRequest describeScheduledActionsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client.describeScheduledActionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client .describeScheduledActionsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client.describeScheduledActionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation.
  
  Parameters:
  
  describeScheduledActionsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeScheduledActionsPaginator
  default DescribeScheduledActionsIterable describeScheduledActionsPaginator(Consumer<DescribeScheduledActionsRequest.Builder> describeScheduledActionsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client.describeScheduledActionsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client .describeScheduledActionsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeScheduledActionsIterable responses = client.describeScheduledActionsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeScheduledActions(software.amazon.awssdk.services.autoscaling.model.DescribeScheduledActionsRequest) operation.
  
  This is a convenience which creates an instance of the DescribeScheduledActionsRequest.Builder avoiding the need to create one manually via DescribeScheduledActionsRequest.builder()
  
  Parameters:
  
  describeScheduledActionsRequest - A Consumer that will call methods on DescribeScheduledActionsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeTags
  default DescribeTagsResponse describeTags(DescribeTagsRequest describeTagsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the specified tags.
  
  You can use filters to limit the results. For example, you can query for the tags for a specific Auto Scaling group. You can specify multiple values for a filter. A tag must match at least one of the specified values for it to be included in the results.
  
  You can also specify multiple filters. The result includes information for a particular tag only if it matches all the filters. If there's no match, no special message is returned.
  
  For more information, see Tag Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  describeTagsRequest -
  
  Returns:
  
  Result of the DescribeTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTags
  default DescribeTagsResponse describeTags(Consumer<DescribeTagsRequest.Builder> describeTagsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the specified tags.
  
  You can use filters to limit the results. For example, you can query for the tags for a specific Auto Scaling group. You can specify multiple values for a filter. A tag must match at least one of the specified values for it to be included in the results.
  
  You can also specify multiple filters. The result includes information for a particular tag only if it matches all the filters. If there's no match, no special message is returned.
  
  For more information, see Tag Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DescribeTagsRequest.Builder avoiding the need to create one manually via DescribeTagsRequest.builder()
  
  Parameters:
  
  describeTagsRequest - A Consumer that will call methods on DescribeTagsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeTags operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTags
  default DescribeTagsResponse describeTags() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the specified tags.
  
  You can use filters to limit the results. For example, you can query for the tags for a specific Auto Scaling group. You can specify multiple values for a filter. A tag must match at least one of the specified values for it to be included in the results.
  
  You can also specify multiple filters. The result includes information for a particular tag only if it matches all the filters. If there's no match, no special message is returned.
  
  For more information, see Tag Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
  
  Returns:
  
  Result of the DescribeTags operation returned by the service.
  
  See Also:
  
  describeTags(DescribeTagsRequest)
  
  AWS API Documentation
- describeTagsPaginator
  default DescribeTagsIterable describeTagsPaginator() throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeTagsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  describeTagsPaginator(DescribeTagsRequest)
  
  AWS API Documentation
- describeTagsPaginator
  default DescribeTagsIterable describeTagsPaginator(DescribeTagsRequest describeTagsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeTagsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation.
  
  Parameters:
  
  describeTagsRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeTagsPaginator
  default DescribeTagsIterable describeTagsPaginator(Consumer<DescribeTagsRequest.Builder> describeTagsRequest) throws InvalidNextTokenException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeTagsResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTagsIterable responses = client.describeTagsPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeTags(software.amazon.awssdk.services.autoscaling.model.DescribeTagsRequest) operation.
  
  This is a convenience which creates an instance of the DescribeTagsRequest.Builder avoiding the need to create one manually via DescribeTagsRequest.builder()
  
  Parameters:
  
  describeTagsRequest - A Consumer that will call methods on DescribeTagsRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeTerminationPolicyTypes
  default DescribeTerminationPolicyTypesResponse describeTerminationPolicyTypes(DescribeTerminationPolicyTypesRequest describeTerminationPolicyTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the termination policies supported by Amazon EC2 Auto Scaling.
  
  For more information, see Configure termination policies for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  describeTerminationPolicyTypesRequest -
  
  Returns:
  
  Result of the DescribeTerminationPolicyTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTerminationPolicyTypes
  default DescribeTerminationPolicyTypesResponse describeTerminationPolicyTypes(Consumer<DescribeTerminationPolicyTypesRequest.Builder> describeTerminationPolicyTypesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the termination policies supported by Amazon EC2 Auto Scaling.
  
  For more information, see Configure termination policies for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DescribeTerminationPolicyTypesRequest.Builder avoiding the need to create one manually via DescribeTerminationPolicyTypesRequest.builder()
  
  Parameters:
  
  describeTerminationPolicyTypesRequest - A Consumer that will call methods on DescribeTerminationPolicyTypesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeTerminationPolicyTypes operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTerminationPolicyTypes
  default DescribeTerminationPolicyTypesResponse describeTerminationPolicyTypes() throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Describes the termination policies supported by Amazon EC2 Auto Scaling.
  
  For more information, see Configure termination policies for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Returns:
  
  Result of the DescribeTerminationPolicyTypes operation returned by the service.
  
  See Also:
  
  describeTerminationPolicyTypes(DescribeTerminationPolicyTypesRequest)
  
  AWS API Documentation
- describeTrafficSources
  default DescribeTrafficSourcesResponse describeTrafficSources(DescribeTrafficSourcesRequest describeTrafficSourcesRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the traffic sources for the specified Auto Scaling group.
  
  You can optionally provide a traffic source type. If you provide a traffic source type, then the results only include that traffic source type.
  
  If you do not provide a traffic source type, then the results include all the traffic sources for the specified Auto Scaling group.
  
  Parameters:
  
  describeTrafficSourcesRequest -
  
  Returns:
  
  Result of the DescribeTrafficSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTrafficSources
  default DescribeTrafficSourcesResponse describeTrafficSources(Consumer<DescribeTrafficSourcesRequest.Builder> describeTrafficSourcesRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about the traffic sources for the specified Auto Scaling group.
  
  You can optionally provide a traffic source type. If you provide a traffic source type, then the results only include that traffic source type.
  
  If you do not provide a traffic source type, then the results include all the traffic sources for the specified Auto Scaling group.
  
  This is a convenience which creates an instance of the DescribeTrafficSourcesRequest.Builder avoiding the need to create one manually via DescribeTrafficSourcesRequest.builder()
  
  Parameters:
  
  describeTrafficSourcesRequest - A Consumer that will call methods on DescribeTrafficSourcesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeTrafficSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeTrafficSourcesPaginator
  default DescribeTrafficSourcesIterable describeTrafficSourcesPaginator(DescribeTrafficSourcesRequest describeTrafficSourcesRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeTrafficSources(software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTrafficSourcesIterable responses = client.describeTrafficSourcesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeTrafficSourcesIterable responses = client .describeTrafficSourcesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTrafficSourcesIterable responses = client.describeTrafficSourcesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeTrafficSources(software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesRequest) operation.
  
  Parameters:
  
  describeTrafficSourcesRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeTrafficSourcesPaginator
  default DescribeTrafficSourcesIterable describeTrafficSourcesPaginator(Consumer<DescribeTrafficSourcesRequest.Builder> describeTrafficSourcesRequest) throws ResourceContentionException, InvalidNextTokenException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeTrafficSources(software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTrafficSourcesIterable responses = client.describeTrafficSourcesPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeTrafficSourcesIterable responses = client .describeTrafficSourcesPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeTrafficSourcesIterable responses = client.describeTrafficSourcesPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeTrafficSources(software.amazon.awssdk.services.autoscaling.model.DescribeTrafficSourcesRequest) operation.
  
  This is a convenience which creates an instance of the DescribeTrafficSourcesRequest.Builder avoiding the need to create one manually via DescribeTrafficSourcesRequest.builder()
  
  Parameters:
  
  describeTrafficSourcesRequest - A Consumer that will call methods on DescribeTrafficSourcesRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeWarmPool
  default DescribeWarmPoolResponse describeWarmPool(DescribeWarmPoolRequest describeWarmPoolRequest) throws InvalidNextTokenException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about a warm pool and its instances.
  
  For more information, see Warm pools for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  describeWarmPoolRequest -
  
  Returns:
  
  Result of the DescribeWarmPool operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeWarmPool
  default DescribeWarmPoolResponse describeWarmPool(Consumer<DescribeWarmPoolRequest.Builder> describeWarmPoolRequest) throws InvalidNextTokenException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Gets information about a warm pool and its instances.
  
  For more information, see Warm pools for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DescribeWarmPoolRequest.Builder avoiding the need to create one manually via DescribeWarmPoolRequest.builder()
  
  Parameters:
  
  describeWarmPoolRequest - A Consumer that will call methods on DescribeWarmPoolRequest.Builder to create a request.
  
  Returns:
  
  Result of the DescribeWarmPool operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- describeWarmPoolPaginator
  default DescribeWarmPoolIterable describeWarmPoolPaginator(DescribeWarmPoolRequest describeWarmPoolRequest) throws InvalidNextTokenException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeWarmPool(software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeWarmPoolIterable responses = client.describeWarmPoolPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeWarmPoolIterable responses = client .describeWarmPoolPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeWarmPoolIterable responses = client.describeWarmPoolPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeWarmPool(software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolRequest) operation.
  
  Parameters:
  
  describeWarmPoolRequest -
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- describeWarmPoolPaginator
  default DescribeWarmPoolIterable describeWarmPoolPaginator(Consumer<DescribeWarmPoolRequest.Builder> describeWarmPoolRequest) throws InvalidNextTokenException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This is a variant of describeWarmPool(software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolRequest) operation. The return type is a custom iterable that can be used to iterate through all the pages. SDK will internally handle making service calls for you.
  
  When this operation is called, a custom iterable is returned but no service calls are made yet. So there is no guarantee that the request is valid. As you iterate through the iterable, SDK will start lazily loading response pages by making service calls until there are no pages left or your iteration stops. If there are errors in your request, you will see the failures only after you start iterating through the iterable.
  
  The following are few ways to iterate through the response pages:
  1) Using a Stream
  software.amazon.awssdk.services.autoscaling.paginators.DescribeWarmPoolIterable responses = client.describeWarmPoolPaginator(request); responses.stream().forEach(....);
  2) Using For loop
  { @code software.amazon.awssdk.services.autoscaling.paginators.DescribeWarmPoolIterable responses = client .describeWarmPoolPaginator(request); for (software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolResponse response : responses) { // do something; } }
  3) Use iterator directly
  software.amazon.awssdk.services.autoscaling.paginators.DescribeWarmPoolIterable responses = client.describeWarmPoolPaginator(request); responses.iterator().forEachRemaining(....);
  
  Please notice that the configuration of MaxRecords won't limit the number of results you get with the paginator. It only limits the number of results in each page.
  
  Note: If you prefer to have control on service calls, use the describeWarmPool(software.amazon.awssdk.services.autoscaling.model.DescribeWarmPoolRequest) operation.
  
  This is a convenience which creates an instance of the DescribeWarmPoolRequest.Builder avoiding the need to create one manually via DescribeWarmPoolRequest.builder()
  
  Parameters:
  
  describeWarmPoolRequest - A Consumer that will call methods on DescribeWarmPoolRequest.Builder to create a request.
  
  Returns:
  
  A custom iterable that can be used to iterate through all the response pages.
  
  See Also:
  
  AWS API Documentation
- detachInstances
  default DetachInstancesResponse detachInstances(DetachInstancesRequest detachInstancesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Removes one or more instances from the specified Auto Scaling group.
  
  After the instances are detached, you can manage them independent of the Auto Scaling group.
  
  If you do not specify the option to decrement the desired capacity, Amazon EC2 Auto Scaling launches instances to replace the ones that are detached.
  
  If there is a Classic Load Balancer attached to the Auto Scaling group, the instances are deregistered from the load balancer. If there are target groups attached to the Auto Scaling group, the instances are deregistered from the target groups.
  
  For more information, see Detach or attach instances in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  detachInstancesRequest -
  
  Returns:
  
  Result of the DetachInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- detachInstances
  default DetachInstancesResponse detachInstances(Consumer<DetachInstancesRequest.Builder> detachInstancesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Removes one or more instances from the specified Auto Scaling group.
  
  After the instances are detached, you can manage them independent of the Auto Scaling group.
  
  If you do not specify the option to decrement the desired capacity, Amazon EC2 Auto Scaling launches instances to replace the ones that are detached.
  
  If there is a Classic Load Balancer attached to the Auto Scaling group, the instances are deregistered from the load balancer. If there are target groups attached to the Auto Scaling group, the instances are deregistered from the target groups.
  
  For more information, see Detach or attach instances in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the DetachInstancesRequest.Builder avoiding the need to create one manually via DetachInstancesRequest.builder()
  
  Parameters:
  
  detachInstancesRequest - A Consumer that will call methods on DetachInstancesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DetachInstances operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- detachLoadBalancerTargetGroups
  default DetachLoadBalancerTargetGroupsResponse detachLoadBalancerTargetGroups(DetachLoadBalancerTargetGroupsRequest detachLoadBalancerTargetGroupsRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DetachTrafficSources, which can detach multiple traffic sources types. We recommend using DetachTrafficSources to simplify how you manage traffic sources. However, we continue to support DetachLoadBalancerTargetGroups. You can use both the original DetachLoadBalancerTargetGroups API operation and DetachTrafficSources on the same Auto Scaling group.
  
  Detaches one or more target groups from the specified Auto Scaling group.
  
  When you detach a target group, it enters the Removing state while deregistering the instances in the group. When all instances are deregistered, then you can no longer describe the target group using the DescribeLoadBalancerTargetGroups API call. The instances remain running.
  
  You can use this operation to detach target groups that were attached by using AttachLoadBalancerTargetGroups, but not for target groups that were attached by using AttachTrafficSources.
  
  Parameters:
  
  detachLoadBalancerTargetGroupsRequest -
  
  Returns:
  
  Result of the DetachLoadBalancerTargetGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- detachLoadBalancerTargetGroups
  default DetachLoadBalancerTargetGroupsResponse detachLoadBalancerTargetGroups(Consumer<DetachLoadBalancerTargetGroupsRequest.Builder> detachLoadBalancerTargetGroupsRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DetachTrafficSources, which can detach multiple traffic sources types. We recommend using DetachTrafficSources to simplify how you manage traffic sources. However, we continue to support DetachLoadBalancerTargetGroups. You can use both the original DetachLoadBalancerTargetGroups API operation and DetachTrafficSources on the same Auto Scaling group.
  
  Detaches one or more target groups from the specified Auto Scaling group.
  
  When you detach a target group, it enters the Removing state while deregistering the instances in the group. When all instances are deregistered, then you can no longer describe the target group using the DescribeLoadBalancerTargetGroups API call. The instances remain running.
  
  You can use this operation to detach target groups that were attached by using AttachLoadBalancerTargetGroups, but not for target groups that were attached by using AttachTrafficSources.
  
  This is a convenience which creates an instance of the DetachLoadBalancerTargetGroupsRequest.Builder avoiding the need to create one manually via DetachLoadBalancerTargetGroupsRequest.builder()
  
  Parameters:
  
  detachLoadBalancerTargetGroupsRequest - A Consumer that will call methods on DetachLoadBalancerTargetGroupsRequest.Builder to create a request.
  
  Returns:
  
  Result of the DetachLoadBalancerTargetGroups operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- detachLoadBalancers
  default DetachLoadBalancersResponse detachLoadBalancers(DetachLoadBalancersRequest detachLoadBalancersRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DetachTrafficSources, which can detach multiple traffic sources types. We recommend using DetachTrafficSources to simplify how you manage traffic sources. However, we continue to support DetachLoadBalancers. You can use both the original DetachLoadBalancers API operation and DetachTrafficSources on the same Auto Scaling group.
  
  Detaches one or more Classic Load Balancers from the specified Auto Scaling group.
  
  This operation detaches only Classic Load Balancers. If you have Application Load Balancers, Network Load Balancers, or Gateway Load Balancers, use the DetachLoadBalancerTargetGroups API instead.
  
  When you detach a load balancer, it enters the Removing state while deregistering the instances in the group. When all instances are deregistered, then you can no longer describe the load balancer using the DescribeLoadBalancers API call. The instances remain running.
  
  Parameters:
  
  detachLoadBalancersRequest -
  
  Returns:
  
  Result of the DetachLoadBalancers operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- detachLoadBalancers
  default DetachLoadBalancersResponse detachLoadBalancers(Consumer<DetachLoadBalancersRequest.Builder> detachLoadBalancersRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  This API operation is superseded by DetachTrafficSources, which can detach multiple traffic sources types. We recommend using DetachTrafficSources to simplify how you manage traffic sources. However, we continue to support DetachLoadBalancers. You can use both the original DetachLoadBalancers API operation and DetachTrafficSources on the same Auto Scaling group.
  
  Detaches one or more Classic Load Balancers from the specified Auto Scaling group.
  
  This operation detaches only Classic Load Balancers. If you have Application Load Balancers, Network Load Balancers, or Gateway Load Balancers, use the DetachLoadBalancerTargetGroups API instead.
  
  When you detach a load balancer, it enters the Removing state while deregistering the instances in the group. When all instances are deregistered, then you can no longer describe the load balancer using the DescribeLoadBalancers API call. The instances remain running.
  
  This is a convenience which creates an instance of the DetachLoadBalancersRequest.Builder avoiding the need to create one manually via DetachLoadBalancersRequest.builder()
  
  Parameters:
  
  detachLoadBalancersRequest - A Consumer that will call methods on DetachLoadBalancersRequest.Builder to create a request.
  
  Returns:
  
  Result of the DetachLoadBalancers operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- detachTrafficSources
  default DetachTrafficSourcesResponse detachTrafficSources(DetachTrafficSourcesRequest detachTrafficSourcesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Detaches one or more traffic sources from the specified Auto Scaling group.
  
  When you detach a traffic source, it enters the Removing state while deregistering the instances in the group. When all instances are deregistered, then you can no longer describe the traffic source using the DescribeTrafficSources API call. The instances continue to run.
  
  Parameters:
  
  detachTrafficSourcesRequest -
  
  Returns:
  
  Result of the DetachTrafficSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- detachTrafficSources
  default DetachTrafficSourcesResponse detachTrafficSources(Consumer<DetachTrafficSourcesRequest.Builder> detachTrafficSourcesRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Detaches one or more traffic sources from the specified Auto Scaling group.
  
  When you detach a traffic source, it enters the Removing state while deregistering the instances in the group. When all instances are deregistered, then you can no longer describe the traffic source using the DescribeTrafficSources API call. The instances continue to run.
  
  This is a convenience which creates an instance of the DetachTrafficSourcesRequest.Builder avoiding the need to create one manually via DetachTrafficSourcesRequest.builder()
  
  Parameters:
  
  detachTrafficSourcesRequest - A Consumer that will call methods on DetachTrafficSourcesRequest.Builder to create a request.
  
  Returns:
  
  Result of the DetachTrafficSources operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- disableMetricsCollection
  default DisableMetricsCollectionResponse disableMetricsCollection(DisableMetricsCollectionRequest disableMetricsCollectionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Disables group metrics collection for the specified Auto Scaling group.
  
  Parameters:
  
  disableMetricsCollectionRequest -
  
  Returns:
  
  Result of the DisableMetricsCollection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- disableMetricsCollection
  default DisableMetricsCollectionResponse disableMetricsCollection(Consumer<DisableMetricsCollectionRequest.Builder> disableMetricsCollectionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Disables group metrics collection for the specified Auto Scaling group.
  
  This is a convenience which creates an instance of the DisableMetricsCollectionRequest.Builder avoiding the need to create one manually via DisableMetricsCollectionRequest.builder()
  
  Parameters:
  
  disableMetricsCollectionRequest - A Consumer that will call methods on DisableMetricsCollectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the DisableMetricsCollection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- enableMetricsCollection
  default EnableMetricsCollectionResponse enableMetricsCollection(EnableMetricsCollectionRequest enableMetricsCollectionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Enables group metrics collection for the specified Auto Scaling group.
  
  You can use these metrics to track changes in an Auto Scaling group and to set alarms on threshold values. You can view group metrics using the Amazon EC2 Auto Scaling console or the CloudWatch console. For more information, see Monitor CloudWatch metrics for your Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  enableMetricsCollectionRequest -
  
  Returns:
  
  Result of the EnableMetricsCollection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- enableMetricsCollection
  default EnableMetricsCollectionResponse enableMetricsCollection(Consumer<EnableMetricsCollectionRequest.Builder> enableMetricsCollectionRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Enables group metrics collection for the specified Auto Scaling group.
  
  You can use these metrics to track changes in an Auto Scaling group and to set alarms on threshold values. You can view group metrics using the Amazon EC2 Auto Scaling console or the CloudWatch console. For more information, see Monitor CloudWatch metrics for your Auto Scaling groups and instances in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the EnableMetricsCollectionRequest.Builder avoiding the need to create one manually via EnableMetricsCollectionRequest.builder()
  
  Parameters:
  
  enableMetricsCollectionRequest - A Consumer that will call methods on EnableMetricsCollectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the EnableMetricsCollection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- enterStandby
  default EnterStandbyResponse enterStandby(EnterStandbyRequest enterStandbyRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Moves the specified instances into the standby state.
  
  If you choose to decrement the desired capacity of the Auto Scaling group, the instances can enter standby as long as the desired capacity of the Auto Scaling group after the instances are placed into standby is equal to or greater than the minimum capacity of the group.
  
  If you choose not to decrement the desired capacity of the Auto Scaling group, the Auto Scaling group launches new instances to replace the instances on standby.
  
  For more information, see Temporarily removing instances from your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  enterStandbyRequest -
  
  Returns:
  
  Result of the EnterStandby operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- enterStandby
  default EnterStandbyResponse enterStandby(Consumer<EnterStandbyRequest.Builder> enterStandbyRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Moves the specified instances into the standby state.
  
  If you choose to decrement the desired capacity of the Auto Scaling group, the instances can enter standby as long as the desired capacity of the Auto Scaling group after the instances are placed into standby is equal to or greater than the minimum capacity of the group.
  
  If you choose not to decrement the desired capacity of the Auto Scaling group, the Auto Scaling group launches new instances to replace the instances on standby.
  
  For more information, see Temporarily removing instances from your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the EnterStandbyRequest.Builder avoiding the need to create one manually via EnterStandbyRequest.builder()
  
  Parameters:
  
  enterStandbyRequest - A Consumer that will call methods on EnterStandbyRequest.Builder to create a request.
  
  Returns:
  
  Result of the EnterStandby operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- executePolicy
  default ExecutePolicyResponse executePolicy(ExecutePolicyRequest executePolicyRequest) throws ScalingActivityInProgressException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Executes the specified policy. This can be useful for testing the design of your scaling policy.
  
  Parameters:
  
  executePolicyRequest -
  
  Returns:
  
  Result of the ExecutePolicy operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- executePolicy
  default ExecutePolicyResponse executePolicy(Consumer<ExecutePolicyRequest.Builder> executePolicyRequest) throws ScalingActivityInProgressException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Executes the specified policy. This can be useful for testing the design of your scaling policy.
  
  This is a convenience which creates an instance of the ExecutePolicyRequest.Builder avoiding the need to create one manually via ExecutePolicyRequest.builder()
  
  Parameters:
  
  executePolicyRequest - A Consumer that will call methods on ExecutePolicyRequest.Builder to create a request.
  
  Returns:
  
  Result of the ExecutePolicy operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- exitStandby
  default ExitStandbyResponse exitStandby(ExitStandbyRequest exitStandbyRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Moves the specified instances out of the standby state.
  
  After you put the instances back in service, the desired capacity is incremented.
  
  For more information, see Temporarily removing instances from your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  exitStandbyRequest -
  
  Returns:
  
  Result of the ExitStandby operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- exitStandby
  default ExitStandbyResponse exitStandby(Consumer<ExitStandbyRequest.Builder> exitStandbyRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Moves the specified instances out of the standby state.
  
  After you put the instances back in service, the desired capacity is incremented.
  
  For more information, see Temporarily removing instances from your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the ExitStandbyRequest.Builder avoiding the need to create one manually via ExitStandbyRequest.builder()
  
  Parameters:
  
  exitStandbyRequest - A Consumer that will call methods on ExitStandbyRequest.Builder to create a request.
  
  Returns:
  
  Result of the ExitStandby operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getPredictiveScalingForecast
  default GetPredictiveScalingForecastResponse getPredictiveScalingForecast(GetPredictiveScalingForecastRequest getPredictiveScalingForecastRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Retrieves the forecast data for a predictive scaling policy.
  
  Load forecasts are predictions of the hourly load values using historical load data from CloudWatch and an analysis of historical trends. Capacity forecasts are represented as predicted values for the minimum capacity that is needed on an hourly basis, based on the hourly load forecast.
  
  A minimum of 24 hours of data is required to create the initial forecasts. However, having a full 14 days of historical data results in more accurate forecasts.
  
  For more information, see Predictive scaling for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  getPredictiveScalingForecastRequest -
  
  Returns:
  
  Result of the GetPredictiveScalingForecast operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- getPredictiveScalingForecast
  default GetPredictiveScalingForecastResponse getPredictiveScalingForecast(Consumer<GetPredictiveScalingForecastRequest.Builder> getPredictiveScalingForecastRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Retrieves the forecast data for a predictive scaling policy.
  
  Load forecasts are predictions of the hourly load values using historical load data from CloudWatch and an analysis of historical trends. Capacity forecasts are represented as predicted values for the minimum capacity that is needed on an hourly basis, based on the hourly load forecast.
  
  A minimum of 24 hours of data is required to create the initial forecasts. However, having a full 14 days of historical data results in more accurate forecasts.
  
  For more information, see Predictive scaling for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the GetPredictiveScalingForecastRequest.Builder avoiding the need to create one manually via GetPredictiveScalingForecastRequest.builder()
  
  Parameters:
  
  getPredictiveScalingForecastRequest - A Consumer that will call methods on GetPredictiveScalingForecastRequest.Builder to create a request.
  
  Returns:
  
  Result of the GetPredictiveScalingForecast operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putLifecycleHook
  default PutLifecycleHookResponse putLifecycleHook(PutLifecycleHookRequest putLifecycleHookRequest) throws LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a lifecycle hook for the specified Auto Scaling group.
  
  Lifecycle hooks let you create solutions that are aware of events in the Auto Scaling instance lifecycle, and then perform a custom action on instances when the corresponding lifecycle event occurs.
  
  This step is a part of the procedure for adding a lifecycle hook to an Auto Scaling group:
  
  (Optional) Create a launch template or launch configuration with a user data script that runs while an instance is in a wait state due to a lifecycle hook.
  
  (Optional) Create a Lambda function and a rule that allows Amazon EventBridge to invoke your Lambda function when an instance is put into a wait state due to a lifecycle hook.
  
  (Optional) Create a notification target and an IAM role. The target can be either an Amazon SQS queue or an Amazon SNS topic. The role allows Amazon EC2 Auto Scaling to publish lifecycle notifications to the target.
  
  Create the lifecycle hook. Specify whether the hook is used when the instances launch or terminate.
  
  If you need more time, record the lifecycle action heartbeat to keep the instance in a wait state using the RecordLifecycleActionHeartbeat API call.
  
  If you finish before the timeout period ends, send a callback by using the CompleteLifecycleAction API call.
  
  For more information, see Amazon EC2 Auto Scaling lifecycle hooks in the Amazon EC2 Auto Scaling User Guide.
  
  If you exceed your maximum limit of lifecycle hooks, which by default is 50 per Auto Scaling group, the call fails.
  
  You can view the lifecycle hooks for an Auto Scaling group using the DescribeLifecycleHooks API call. If you are no longer using a lifecycle hook, you can delete it by calling the DeleteLifecycleHook API.
  
  Parameters:
  
  putLifecycleHookRequest -
  
  Returns:
  
  Result of the PutLifecycleHook operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putLifecycleHook
  default PutLifecycleHookResponse putLifecycleHook(Consumer<PutLifecycleHookRequest.Builder> putLifecycleHookRequest) throws LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a lifecycle hook for the specified Auto Scaling group.
  
  Lifecycle hooks let you create solutions that are aware of events in the Auto Scaling instance lifecycle, and then perform a custom action on instances when the corresponding lifecycle event occurs.
  
  This step is a part of the procedure for adding a lifecycle hook to an Auto Scaling group:
  
  (Optional) Create a launch template or launch configuration with a user data script that runs while an instance is in a wait state due to a lifecycle hook.
  
  (Optional) Create a Lambda function and a rule that allows Amazon EventBridge to invoke your Lambda function when an instance is put into a wait state due to a lifecycle hook.
  
  (Optional) Create a notification target and an IAM role. The target can be either an Amazon SQS queue or an Amazon SNS topic. The role allows Amazon EC2 Auto Scaling to publish lifecycle notifications to the target.
  
  Create the lifecycle hook. Specify whether the hook is used when the instances launch or terminate.
  
  If you need more time, record the lifecycle action heartbeat to keep the instance in a wait state using the RecordLifecycleActionHeartbeat API call.
  
  If you finish before the timeout period ends, send a callback by using the CompleteLifecycleAction API call.
  
  For more information, see Amazon EC2 Auto Scaling lifecycle hooks in the Amazon EC2 Auto Scaling User Guide.
  
  If you exceed your maximum limit of lifecycle hooks, which by default is 50 per Auto Scaling group, the call fails.
  
  You can view the lifecycle hooks for an Auto Scaling group using the DescribeLifecycleHooks API call. If you are no longer using a lifecycle hook, you can delete it by calling the DeleteLifecycleHook API.
  
  This is a convenience which creates an instance of the PutLifecycleHookRequest.Builder avoiding the need to create one manually via PutLifecycleHookRequest.builder()
  
  Parameters:
  
  putLifecycleHookRequest - A Consumer that will call methods on PutLifecycleHookRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutLifecycleHook operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putNotificationConfiguration
  default PutNotificationConfigurationResponse putNotificationConfiguration(PutNotificationConfigurationRequest putNotificationConfigurationRequest) throws LimitExceededException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Configures an Auto Scaling group to send notifications when specified events take place. Subscribers to the specified topic can have messages delivered to an endpoint such as a web server or an email address.
  
  This configuration overwrites any existing configuration.
  
  For more information, see Amazon SNS notification options for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  If you exceed your maximum limit of SNS topics, which is 10 per Auto Scaling group, the call fails.
  
  Parameters:
  
  putNotificationConfigurationRequest -
  
  Returns:
  
  Result of the PutNotificationConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putNotificationConfiguration
  default PutNotificationConfigurationResponse putNotificationConfiguration(Consumer<PutNotificationConfigurationRequest.Builder> putNotificationConfigurationRequest) throws LimitExceededException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Configures an Auto Scaling group to send notifications when specified events take place. Subscribers to the specified topic can have messages delivered to an endpoint such as a web server or an email address.
  
  This configuration overwrites any existing configuration.
  
  For more information, see Amazon SNS notification options for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  If you exceed your maximum limit of SNS topics, which is 10 per Auto Scaling group, the call fails.
  
  This is a convenience which creates an instance of the PutNotificationConfigurationRequest.Builder avoiding the need to create one manually via PutNotificationConfigurationRequest.builder()
  
  Parameters:
  
  putNotificationConfigurationRequest - A Consumer that will call methods on PutNotificationConfigurationRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutNotificationConfiguration operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putScalingPolicy
  default PutScalingPolicyResponse putScalingPolicy(PutScalingPolicyRequest putScalingPolicyRequest) throws LimitExceededException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a scaling policy for an Auto Scaling group. Scaling policies are used to scale an Auto Scaling group based on configurable metrics. If no policies are defined, the dynamic scaling and predictive scaling features are not used.
  
  For more information about using dynamic scaling, see Target tracking scaling policies and Step and simple scaling policies in the Amazon EC2 Auto Scaling User Guide.
  
  For more information about using predictive scaling, see Predictive scaling for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  You can view the scaling policies for an Auto Scaling group using the DescribePolicies API call. If you are no longer using a scaling policy, you can delete it by calling the DeletePolicy API.
  
  Parameters:
  
  putScalingPolicyRequest -
  
  Returns:
  
  Result of the PutScalingPolicy operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putScalingPolicy
  default PutScalingPolicyResponse putScalingPolicy(Consumer<PutScalingPolicyRequest.Builder> putScalingPolicyRequest) throws LimitExceededException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a scaling policy for an Auto Scaling group. Scaling policies are used to scale an Auto Scaling group based on configurable metrics. If no policies are defined, the dynamic scaling and predictive scaling features are not used.
  
  For more information about using dynamic scaling, see Target tracking scaling policies and Step and simple scaling policies in the Amazon EC2 Auto Scaling User Guide.
  
  For more information about using predictive scaling, see Predictive scaling for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  You can view the scaling policies for an Auto Scaling group using the DescribePolicies API call. If you are no longer using a scaling policy, you can delete it by calling the DeletePolicy API.
  
  This is a convenience which creates an instance of the PutScalingPolicyRequest.Builder avoiding the need to create one manually via PutScalingPolicyRequest.builder()
  
  Parameters:
  
  putScalingPolicyRequest - A Consumer that will call methods on PutScalingPolicyRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutScalingPolicy operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putScheduledUpdateGroupAction
  default PutScheduledUpdateGroupActionResponse putScheduledUpdateGroupAction(PutScheduledUpdateGroupActionRequest putScheduledUpdateGroupActionRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a scheduled scaling action for an Auto Scaling group.
  
  For more information, see Scheduled scaling in the Amazon EC2 Auto Scaling User Guide.
  
  You can view the scheduled actions for an Auto Scaling group using the DescribeScheduledActions API call. If you are no longer using a scheduled action, you can delete it by calling the DeleteScheduledAction API.
  
  If you try to schedule your action in the past, Amazon EC2 Auto Scaling returns an error message.
  
  Parameters:
  
  putScheduledUpdateGroupActionRequest -
  
  Returns:
  
  Result of the PutScheduledUpdateGroupAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putScheduledUpdateGroupAction
  default PutScheduledUpdateGroupActionResponse putScheduledUpdateGroupAction(Consumer<PutScheduledUpdateGroupActionRequest.Builder> putScheduledUpdateGroupActionRequest) throws AlreadyExistsException, LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a scheduled scaling action for an Auto Scaling group.
  
  For more information, see Scheduled scaling in the Amazon EC2 Auto Scaling User Guide.
  
  You can view the scheduled actions for an Auto Scaling group using the DescribeScheduledActions API call. If you are no longer using a scheduled action, you can delete it by calling the DeleteScheduledAction API.
  
  If you try to schedule your action in the past, Amazon EC2 Auto Scaling returns an error message.
  
  This is a convenience which creates an instance of the PutScheduledUpdateGroupActionRequest.Builder avoiding the need to create one manually via PutScheduledUpdateGroupActionRequest.builder()
  
  Parameters:
  
  putScheduledUpdateGroupActionRequest - A Consumer that will call methods on PutScheduledUpdateGroupActionRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutScheduledUpdateGroupAction operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putWarmPool
  default PutWarmPoolResponse putWarmPool(PutWarmPoolRequest putWarmPoolRequest) throws LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a warm pool for the specified Auto Scaling group. A warm pool is a pool of pre-initialized EC2 instances that sits alongside the Auto Scaling group. Whenever your application needs to scale out, the Auto Scaling group can draw on the warm pool to meet its new desired capacity.
  
  This operation must be called from the Region in which the Auto Scaling group was created.
  
  You can view the instances in the warm pool using the DescribeWarmPool API call. If you are no longer using a warm pool, you can delete it by calling the DeleteWarmPool API.
  
  For more information, see Warm pools for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  putWarmPoolRequest -
  
  Returns:
  
  Result of the PutWarmPool operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- putWarmPool
  default PutWarmPoolResponse putWarmPool(Consumer<PutWarmPoolRequest.Builder> putWarmPoolRequest) throws LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Creates or updates a warm pool for the specified Auto Scaling group. A warm pool is a pool of pre-initialized EC2 instances that sits alongside the Auto Scaling group. Whenever your application needs to scale out, the Auto Scaling group can draw on the warm pool to meet its new desired capacity.
  
  This operation must be called from the Region in which the Auto Scaling group was created.
  
  You can view the instances in the warm pool using the DescribeWarmPool API call. If you are no longer using a warm pool, you can delete it by calling the DeleteWarmPool API.
  
  For more information, see Warm pools for Amazon EC2 Auto Scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the PutWarmPoolRequest.Builder avoiding the need to create one manually via PutWarmPoolRequest.builder()
  
  Parameters:
  
  putWarmPoolRequest - A Consumer that will call methods on PutWarmPoolRequest.Builder to create a request.
  
  Returns:
  
  Result of the PutWarmPool operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- recordLifecycleActionHeartbeat
  default RecordLifecycleActionHeartbeatResponse recordLifecycleActionHeartbeat(RecordLifecycleActionHeartbeatRequest recordLifecycleActionHeartbeatRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Records a heartbeat for the lifecycle action associated with the specified token or instance. This extends the timeout by the length of time defined using the PutLifecycleHook API call.
  
  This step is a part of the procedure for adding a lifecycle hook to an Auto Scaling group:
  
  (Optional) Create a launch template or launch configuration with a user data script that runs while an instance is in a wait state due to a lifecycle hook.
  
  (Optional) Create a Lambda function and a rule that allows Amazon EventBridge to invoke your Lambda function when an instance is put into a wait state due to a lifecycle hook.
  
  (Optional) Create a notification target and an IAM role. The target can be either an Amazon SQS queue or an Amazon SNS topic. The role allows Amazon EC2 Auto Scaling to publish lifecycle notifications to the target.
  
  Create the lifecycle hook. Specify whether the hook is used when the instances launch or terminate.
  
  If you need more time, record the lifecycle action heartbeat to keep the instance in a wait state.
  
  If you finish before the timeout period ends, send a callback by using the CompleteLifecycleAction API call.
  
  For more information, see Amazon EC2 Auto Scaling lifecycle hooks in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  recordLifecycleActionHeartbeatRequest -
  
  Returns:
  
  Result of the RecordLifecycleActionHeartbeat operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- recordLifecycleActionHeartbeat
  default RecordLifecycleActionHeartbeatResponse recordLifecycleActionHeartbeat(Consumer<RecordLifecycleActionHeartbeatRequest.Builder> recordLifecycleActionHeartbeatRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Records a heartbeat for the lifecycle action associated with the specified token or instance. This extends the timeout by the length of time defined using the PutLifecycleHook API call.
  
  This step is a part of the procedure for adding a lifecycle hook to an Auto Scaling group:
  
  (Optional) Create a launch template or launch configuration with a user data script that runs while an instance is in a wait state due to a lifecycle hook.
  
  (Optional) Create a Lambda function and a rule that allows Amazon EventBridge to invoke your Lambda function when an instance is put into a wait state due to a lifecycle hook.
  
  (Optional) Create a notification target and an IAM role. The target can be either an Amazon SQS queue or an Amazon SNS topic. The role allows Amazon EC2 Auto Scaling to publish lifecycle notifications to the target.
  
  Create the lifecycle hook. Specify whether the hook is used when the instances launch or terminate.
  
  If you need more time, record the lifecycle action heartbeat to keep the instance in a wait state.
  
  If you finish before the timeout period ends, send a callback by using the CompleteLifecycleAction API call.
  
  For more information, see Amazon EC2 Auto Scaling lifecycle hooks in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the RecordLifecycleActionHeartbeatRequest.Builder avoiding the need to create one manually via RecordLifecycleActionHeartbeatRequest.builder()
  
  Parameters:
  
  recordLifecycleActionHeartbeatRequest - A Consumer that will call methods on RecordLifecycleActionHeartbeatRequest.Builder to create a request.
  
  Returns:
  
  Result of the RecordLifecycleActionHeartbeat operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- resumeProcesses
  default ResumeProcessesResponse resumeProcesses(ResumeProcessesRequest resumeProcessesRequest) throws ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Resumes the specified suspended auto scaling processes, or all suspended process, for the specified Auto Scaling group.
  
  For more information, see Suspend and resume Amazon EC2 Auto Scaling processes in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  resumeProcessesRequest -
  
  Returns:
  
  Result of the ResumeProcesses operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- resumeProcesses
  default ResumeProcessesResponse resumeProcesses(Consumer<ResumeProcessesRequest.Builder> resumeProcessesRequest) throws ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Resumes the specified suspended auto scaling processes, or all suspended process, for the specified Auto Scaling group.
  
  For more information, see Suspend and resume Amazon EC2 Auto Scaling processes in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the ResumeProcessesRequest.Builder avoiding the need to create one manually via ResumeProcessesRequest.builder()
  
  Parameters:
  
  resumeProcessesRequest - A Consumer that will call methods on ResumeProcessesRequest.Builder to create a request.
  
  Returns:
  
  Result of the ResumeProcesses operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- rollbackInstanceRefresh
  default RollbackInstanceRefreshResponse rollbackInstanceRefresh(RollbackInstanceRefreshRequest rollbackInstanceRefreshRequest) throws LimitExceededException, ResourceContentionException, ActiveInstanceRefreshNotFoundException, IrreversibleInstanceRefreshException, AwsServiceException, SdkClientException, AutoScalingException
  
  Cancels an instance refresh that is in progress and rolls back any changes that it made. Amazon EC2 Auto Scaling replaces any instances that were replaced during the instance refresh. This restores your Auto Scaling group to the configuration that it was using before the start of the instance refresh.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group after you make configuration changes.
  
  A rollback is not supported in the following situations:
  
  There is no desired configuration specified for the instance refresh.
  
  The Auto Scaling group has a launch template that uses an Amazon Web Services Systems Manager parameter instead of an AMI ID for the ImageId property.
  
  The Auto Scaling group uses the launch template's invalid input: '&#36'Latest or invalid input: '&#36'Default version.
  
  When you receive a successful response from this operation, Amazon EC2 Auto Scaling immediately begins replacing instances. You can check the status of this operation through the DescribeInstanceRefreshes API operation.
  
  Parameters:
  
  rollbackInstanceRefreshRequest -
  
  Returns:
  
  Result of the RollbackInstanceRefresh operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- rollbackInstanceRefresh
  default RollbackInstanceRefreshResponse rollbackInstanceRefresh(Consumer<RollbackInstanceRefreshRequest.Builder> rollbackInstanceRefreshRequest) throws LimitExceededException, ResourceContentionException, ActiveInstanceRefreshNotFoundException, IrreversibleInstanceRefreshException, AwsServiceException, SdkClientException, AutoScalingException
  
  Cancels an instance refresh that is in progress and rolls back any changes that it made. Amazon EC2 Auto Scaling replaces any instances that were replaced during the instance refresh. This restores your Auto Scaling group to the configuration that it was using before the start of the instance refresh.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group after you make configuration changes.
  
  A rollback is not supported in the following situations:
  
  There is no desired configuration specified for the instance refresh.
  
  The Auto Scaling group has a launch template that uses an Amazon Web Services Systems Manager parameter instead of an AMI ID for the ImageId property.
  
  The Auto Scaling group uses the launch template's invalid input: '&#36'Latest or invalid input: '&#36'Default version.
  
  When you receive a successful response from this operation, Amazon EC2 Auto Scaling immediately begins replacing instances. You can check the status of this operation through the DescribeInstanceRefreshes API operation.
  
  This is a convenience which creates an instance of the RollbackInstanceRefreshRequest.Builder avoiding the need to create one manually via RollbackInstanceRefreshRequest.builder()
  
  Parameters:
  
  rollbackInstanceRefreshRequest - A Consumer that will call methods on RollbackInstanceRefreshRequest.Builder to create a request.
  
  Returns:
  
  Result of the RollbackInstanceRefresh operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- setDesiredCapacity
  default SetDesiredCapacityResponse setDesiredCapacity(SetDesiredCapacityRequest setDesiredCapacityRequest) throws ScalingActivityInProgressException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Sets the size of the specified Auto Scaling group.
  
  If a scale-in activity occurs as a result of a new DesiredCapacity value that is lower than the current size of the group, the Auto Scaling group uses its termination policy to determine which instances to terminate.
  
  For more information, see Manual scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  setDesiredCapacityRequest -
  
  Returns:
  
  Result of the SetDesiredCapacity operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- setDesiredCapacity
  default SetDesiredCapacityResponse setDesiredCapacity(Consumer<SetDesiredCapacityRequest.Builder> setDesiredCapacityRequest) throws ScalingActivityInProgressException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Sets the size of the specified Auto Scaling group.
  
  If a scale-in activity occurs as a result of a new DesiredCapacity value that is lower than the current size of the group, the Auto Scaling group uses its termination policy to determine which instances to terminate.
  
  For more information, see Manual scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the SetDesiredCapacityRequest.Builder avoiding the need to create one manually via SetDesiredCapacityRequest.builder()
  
  Parameters:
  
  setDesiredCapacityRequest - A Consumer that will call methods on SetDesiredCapacityRequest.Builder to create a request.
  
  Returns:
  
  Result of the SetDesiredCapacity operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- setInstanceHealth
  default SetInstanceHealthResponse setInstanceHealth(SetInstanceHealthRequest setInstanceHealthRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Sets the health status of the specified instance.
  
  For more information, see Set up a custom health check for your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  setInstanceHealthRequest -
  
  Returns:
  
  Result of the SetInstanceHealth operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- setInstanceHealth
  default SetInstanceHealthResponse setInstanceHealth(Consumer<SetInstanceHealthRequest.Builder> setInstanceHealthRequest) throws ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Sets the health status of the specified instance.
  
  For more information, see Set up a custom health check for your Auto Scaling group in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the SetInstanceHealthRequest.Builder avoiding the need to create one manually via SetInstanceHealthRequest.builder()
  
  Parameters:
  
  setInstanceHealthRequest - A Consumer that will call methods on SetInstanceHealthRequest.Builder to create a request.
  
  Returns:
  
  Result of the SetInstanceHealth operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- setInstanceProtection
  default SetInstanceProtectionResponse setInstanceProtection(SetInstanceProtectionRequest setInstanceProtectionRequest) throws LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Updates the instance protection settings of the specified instances. This operation cannot be called on instances in a warm pool.
  
  For more information, see Use instance scale-in protection in the Amazon EC2 Auto Scaling User Guide.
  
  If you exceed your maximum limit of instance IDs, which is 50 per Auto Scaling group, the call fails.
  
  Parameters:
  
  setInstanceProtectionRequest -
  
  Returns:
  
  Result of the SetInstanceProtection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- setInstanceProtection
  default SetInstanceProtectionResponse setInstanceProtection(Consumer<SetInstanceProtectionRequest.Builder> setInstanceProtectionRequest) throws LimitExceededException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Updates the instance protection settings of the specified instances. This operation cannot be called on instances in a warm pool.
  
  For more information, see Use instance scale-in protection in the Amazon EC2 Auto Scaling User Guide.
  
  If you exceed your maximum limit of instance IDs, which is 50 per Auto Scaling group, the call fails.
  
  This is a convenience which creates an instance of the SetInstanceProtectionRequest.Builder avoiding the need to create one manually via SetInstanceProtectionRequest.builder()
  
  Parameters:
  
  setInstanceProtectionRequest - A Consumer that will call methods on SetInstanceProtectionRequest.Builder to create a request.
  
  Returns:
  
  Result of the SetInstanceProtection operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startInstanceRefresh
  default StartInstanceRefreshResponse startInstanceRefresh(StartInstanceRefreshRequest startInstanceRefreshRequest) throws LimitExceededException, ResourceContentionException, InstanceRefreshInProgressException, AwsServiceException, SdkClientException, AutoScalingException
  
  Starts an instance refresh.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group. This feature is helpful, for example, when you have a new AMI or a new user data script. You just need to create a new launch template that specifies the new AMI or user data script. Then start an instance refresh to immediately begin the process of updating instances in the group.
  
  If successful, the request's response contains a unique ID that you can use to track the progress of the instance refresh. To query its status, call the DescribeInstanceRefreshes API. To describe the instance refreshes that have already run, call the DescribeInstanceRefreshes API. To cancel an instance refresh that is in progress, use the CancelInstanceRefresh API.
  
  An instance refresh might fail for several reasons, such as EC2 launch failures, misconfigured health checks, or not ignoring or allowing the termination of instances that are in Standby state or protected from scale in. You can monitor for failed EC2 launches using the scaling activities. To find the scaling activities, call the DescribeScalingActivities API.
  
  If you enable auto rollback, your Auto Scaling group will be rolled back automatically when the instance refresh fails. You can enable this feature before starting an instance refresh by specifying the AutoRollback property in the instance refresh preferences. Otherwise, to roll back an instance refresh before it finishes, use the RollbackInstanceRefresh API.
  
  Parameters:
  
  startInstanceRefreshRequest -
  
  Returns:
  
  Result of the StartInstanceRefresh operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- startInstanceRefresh
  default StartInstanceRefreshResponse startInstanceRefresh(Consumer<StartInstanceRefreshRequest.Builder> startInstanceRefreshRequest) throws LimitExceededException, ResourceContentionException, InstanceRefreshInProgressException, AwsServiceException, SdkClientException, AutoScalingException
  
  Starts an instance refresh.
  
  This operation is part of the instance refresh feature in Amazon EC2 Auto Scaling, which helps you update instances in your Auto Scaling group. This feature is helpful, for example, when you have a new AMI or a new user data script. You just need to create a new launch template that specifies the new AMI or user data script. Then start an instance refresh to immediately begin the process of updating instances in the group.
  
  If successful, the request's response contains a unique ID that you can use to track the progress of the instance refresh. To query its status, call the DescribeInstanceRefreshes API. To describe the instance refreshes that have already run, call the DescribeInstanceRefreshes API. To cancel an instance refresh that is in progress, use the CancelInstanceRefresh API.
  
  An instance refresh might fail for several reasons, such as EC2 launch failures, misconfigured health checks, or not ignoring or allowing the termination of instances that are in Standby state or protected from scale in. You can monitor for failed EC2 launches using the scaling activities. To find the scaling activities, call the DescribeScalingActivities API.
  
  If you enable auto rollback, your Auto Scaling group will be rolled back automatically when the instance refresh fails. You can enable this feature before starting an instance refresh by specifying the AutoRollback property in the instance refresh preferences. Otherwise, to roll back an instance refresh before it finishes, use the RollbackInstanceRefresh API.
  
  This is a convenience which creates an instance of the StartInstanceRefreshRequest.Builder avoiding the need to create one manually via StartInstanceRefreshRequest.builder()
  
  Parameters:
  
  startInstanceRefreshRequest - A Consumer that will call methods on StartInstanceRefreshRequest.Builder to create a request.
  
  Returns:
  
  Result of the StartInstanceRefresh operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- suspendProcesses
  default SuspendProcessesResponse suspendProcesses(SuspendProcessesRequest suspendProcessesRequest) throws ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Suspends the specified auto scaling processes, or all processes, for the specified Auto Scaling group.
  
  If you suspend either the Launch or Terminate process types, it can prevent other process types from functioning properly. For more information, see Suspend and resume Amazon EC2 Auto Scaling processes in the Amazon EC2 Auto Scaling User Guide.
  
  To resume processes that have been suspended, call the ResumeProcesses API.
  
  Parameters:
  
  suspendProcessesRequest -
  
  Returns:
  
  Result of the SuspendProcesses operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- suspendProcesses
  default SuspendProcessesResponse suspendProcesses(Consumer<SuspendProcessesRequest.Builder> suspendProcessesRequest) throws ResourceInUseException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Suspends the specified auto scaling processes, or all processes, for the specified Auto Scaling group.
  
  If you suspend either the Launch or Terminate process types, it can prevent other process types from functioning properly. For more information, see Suspend and resume Amazon EC2 Auto Scaling processes in the Amazon EC2 Auto Scaling User Guide.
  
  To resume processes that have been suspended, call the ResumeProcesses API.
  
  This is a convenience which creates an instance of the SuspendProcessesRequest.Builder avoiding the need to create one manually via SuspendProcessesRequest.builder()
  
  Parameters:
  
  suspendProcessesRequest - A Consumer that will call methods on SuspendProcessesRequest.Builder to create a request.
  
  Returns:
  
  Result of the SuspendProcesses operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- terminateInstanceInAutoScalingGroup
  default TerminateInstanceInAutoScalingGroupResponse terminateInstanceInAutoScalingGroup(TerminateInstanceInAutoScalingGroupRequest terminateInstanceInAutoScalingGroupRequest) throws ScalingActivityInProgressException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Terminates the specified instance and optionally adjusts the desired group size. This operation cannot be called on instances in a warm pool.
  
  This call simply makes a termination request. The instance is not terminated immediately. When an instance is terminated, the instance status changes to terminated. You can't connect to or start an instance after you've terminated it.
  
  If you do not specify the option to decrement the desired capacity, Amazon EC2 Auto Scaling launches instances to replace the ones that are terminated.
  
  By default, Amazon EC2 Auto Scaling balances instances across all Availability Zones. If you decrement the desired capacity, your Auto Scaling group can become unbalanced between Availability Zones. Amazon EC2 Auto Scaling tries to rebalance the group, and rebalancing might terminate instances in other zones. For more information, see Manual scaling in the Amazon EC2 Auto Scaling User Guide.
  
  Parameters:
  
  terminateInstanceInAutoScalingGroupRequest -
  
  Returns:
  
  Result of the TerminateInstanceInAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- terminateInstanceInAutoScalingGroup
  default TerminateInstanceInAutoScalingGroupResponse terminateInstanceInAutoScalingGroup(Consumer<TerminateInstanceInAutoScalingGroupRequest.Builder> terminateInstanceInAutoScalingGroupRequest) throws ScalingActivityInProgressException, ResourceContentionException, AwsServiceException, SdkClientException, AutoScalingException
  
  Terminates the specified instance and optionally adjusts the desired group size. This operation cannot be called on instances in a warm pool.
  
  This call simply makes a termination request. The instance is not terminated immediately. When an instance is terminated, the instance status changes to terminated. You can't connect to or start an instance after you've terminated it.
  
  If you do not specify the option to decrement the desired capacity, Amazon EC2 Auto Scaling launches instances to replace the ones that are terminated.
  
  By default, Amazon EC2 Auto Scaling balances instances across all Availability Zones. If you decrement the desired capacity, your Auto Scaling group can become unbalanced between Availability Zones. Amazon EC2 Auto Scaling tries to rebalance the group, and rebalancing might terminate instances in other zones. For more information, see Manual scaling in the Amazon EC2 Auto Scaling User Guide.
  
  This is a convenience which creates an instance of the TerminateInstanceInAutoScalingGroupRequest.Builder avoiding the need to create one manually via TerminateInstanceInAutoScalingGroupRequest.builder()
  
  Parameters:
  
  terminateInstanceInAutoScalingGroupRequest - A Consumer that will call methods on TerminateInstanceInAutoScalingGroupRequest.Builder to create a request.
  
  Returns:
  
  Result of the TerminateInstanceInAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateAutoScalingGroup
  default UpdateAutoScalingGroupResponse updateAutoScalingGroup(UpdateAutoScalingGroupRequest updateAutoScalingGroupRequest) throws ScalingActivityInProgressException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  We strongly recommend that all Auto Scaling groups use launch templates to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.
  
  Updates the configuration for the specified Auto Scaling group.
  
  To update an Auto Scaling group, specify the name of the group and the property that you want to change. Any properties that you don't specify are not changed by this update request. The new settings take effect on any scaling activities after this call returns.
  
  If you associate a new launch configuration or template with an Auto Scaling group, all new instances will get the updated configuration. Existing instances continue to run with the configuration that they were originally launched with. When you update a group to specify a mixed instances policy instead of a launch configuration or template, existing instances may be replaced to match the new purchasing options that you specified in the policy. For example, if the group currently has 100% On-Demand capacity and the policy specifies 50% Spot capacity, this means that half of your instances will be gradually terminated and relaunched as Spot Instances. When replacing instances, Amazon EC2 Auto Scaling launches new instances before terminating the old ones, so that updating your group does not compromise the performance or availability of your application.
  
  Note the following about changing DesiredCapacity, MaxSize, or MinSize:
  
  If a scale-in activity occurs as a result of a new DesiredCapacity value that is lower than the current size of the group, the Auto Scaling group uses its termination policy to determine which instances to terminate.
  
  If you specify a new value for MinSize without specifying a value for DesiredCapacity, and the new MinSize is larger than the current size of the group, this sets the group's DesiredCapacity to the new MinSize value.
  
  If you specify a new value for MaxSize without specifying a value for DesiredCapacity, and the new MaxSize is smaller than the current size of the group, this sets the group's DesiredCapacity to the new MaxSize value.
  
  To see which properties have been set, call the DescribeAutoScalingGroups API. To view the scaling policies for an Auto Scaling group, call the DescribePolicies API. If the group has scaling policies, you can update them by calling the PutScalingPolicy API.
  
  Parameters:
  
  updateAutoScalingGroupRequest -
  
  Returns:
  
  Result of the UpdateAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- updateAutoScalingGroup
  default UpdateAutoScalingGroupResponse updateAutoScalingGroup(Consumer<UpdateAutoScalingGroupRequest.Builder> updateAutoScalingGroupRequest) throws ScalingActivityInProgressException, ResourceContentionException, ServiceLinkedRoleFailureException, AwsServiceException, SdkClientException, AutoScalingException
  
  We strongly recommend that all Auto Scaling groups use launch templates to ensure full functionality for Amazon EC2 Auto Scaling and Amazon EC2.
  
  Updates the configuration for the specified Auto Scaling group.
  
  To update an Auto Scaling group, specify the name of the group and the property that you want to change. Any properties that you don't specify are not changed by this update request. The new settings take effect on any scaling activities after this call returns.
  
  If you associate a new launch configuration or template with an Auto Scaling group, all new instances will get the updated configuration. Existing instances continue to run with the configuration that they were originally launched with. When you update a group to specify a mixed instances policy instead of a launch configuration or template, existing instances may be replaced to match the new purchasing options that you specified in the policy. For example, if the group currently has 100% On-Demand capacity and the policy specifies 50% Spot capacity, this means that half of your instances will be gradually terminated and relaunched as Spot Instances. When replacing instances, Amazon EC2 Auto Scaling launches new instances before terminating the old ones, so that updating your group does not compromise the performance or availability of your application.
  
  Note the following about changing DesiredCapacity, MaxSize, or MinSize:
  
  If a scale-in activity occurs as a result of a new DesiredCapacity value that is lower than the current size of the group, the Auto Scaling group uses its termination policy to determine which instances to terminate.
  
  If you specify a new value for MinSize without specifying a value for DesiredCapacity, and the new MinSize is larger than the current size of the group, this sets the group's DesiredCapacity to the new MinSize value.
  
  If you specify a new value for MaxSize without specifying a value for DesiredCapacity, and the new MaxSize is smaller than the current size of the group, this sets the group's DesiredCapacity to the new MaxSize value.
  
  To see which properties have been set, call the DescribeAutoScalingGroups API. To view the scaling policies for an Auto Scaling group, call the DescribePolicies API. If the group has scaling policies, you can update them by calling the PutScalingPolicy API.
  
  This is a convenience which creates an instance of the UpdateAutoScalingGroupRequest.Builder avoiding the need to create one manually via UpdateAutoScalingGroupRequest.builder()
  
  Parameters:
  
  updateAutoScalingGroupRequest - A Consumer that will call methods on UpdateAutoScalingGroupRequest.Builder to create a request.
  
  Returns:
  
  Result of the UpdateAutoScalingGroup operation returned by the service.
  
  See Also:
  
  AWS API Documentation
- waiter
  
  default AutoScalingWaiter waiter()
  
  Create an instance of AutoScalingWaiter using this client.
  Waiters created via this method are managed by the SDK and resources will be released when the service client is closed.
  
  Returns:
  
  an instance of AutoScalingWaiter
- create
  
  static AutoScalingClient create()
  
  Create a AutoScalingClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.
- builder
  
  static AutoScalingClientBuilder builder()
  
  Create a builder that can be used to configure and create a AutoScalingClient.
- serviceMetadata
  
  static ServiceMetadata serviceMetadata()
- serviceClientConfiguration
  
  default AutoScalingServiceClientConfiguration serviceClientConfiguration()
  
  Description copied from interface: SdkClient
  
  The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
  
  Specified by:
  
  serviceClientConfiguration in interface AwsClient
  
  Specified by:
  
  serviceClientConfiguration in interface SdkClient
  
  Returns:
  
  SdkServiceClientConfiguration

Interface AutoScalingClient

Field Summary

Method Summary

Methods inherited from interface software.amazon.awssdk.utils.SdkAutoCloseable

Methods inherited from interface software.amazon.awssdk.core.SdkClient

Field Details

SERVICE_NAME

SERVICE_METADATA_ID

Method Details

attachInstances

attachInstances

attachLoadBalancerTargetGroups

attachLoadBalancerTargetGroups

attachLoadBalancers

attachLoadBalancers

attachTrafficSources

attachTrafficSources

batchDeleteScheduledAction

batchDeleteScheduledAction

batchPutScheduledUpdateGroupAction

batchPutScheduledUpdateGroupAction

cancelInstanceRefresh

cancelInstanceRefresh

completeLifecycleAction

completeLifecycleAction

createAutoScalingGroup

createAutoScalingGroup

createLaunchConfiguration

createLaunchConfiguration

createOrUpdateTags

createOrUpdateTags

deleteAutoScalingGroup

deleteAutoScalingGroup

deleteLaunchConfiguration

deleteLaunchConfiguration

deleteLifecycleHook

deleteLifecycleHook

deleteNotificationConfiguration

deleteNotificationConfiguration

deletePolicy

deletePolicy

deleteScheduledAction

deleteScheduledAction

deleteTags

deleteTags

deleteWarmPool

deleteWarmPool

describeAccountLimits

describeAccountLimits

describeAccountLimits

describeAdjustmentTypes

describeAdjustmentTypes

describeAdjustmentTypes

describeAutoScalingGroups

describeAutoScalingGroups

describeAutoScalingGroups

describeAutoScalingGroupsPaginator

describeAutoScalingGroupsPaginator

describeAutoScalingGroupsPaginator

describeAutoScalingInstances

describeAutoScalingInstances

describeAutoScalingInstances

describeAutoScalingInstancesPaginator

describeAutoScalingInstancesPaginator

describeAutoScalingInstancesPaginator

describeAutoScalingNotificationTypes

describeAutoScalingNotificationTypes

describeAutoScalingNotificationTypes

describeInstanceRefreshes

describeInstanceRefreshes

describeInstanceRefreshesPaginator

describeInstanceRefreshesPaginator

describeLaunchConfigurations

describeLaunchConfigurations

describeLaunchConfigurations

describeLaunchConfigurationsPaginator

describeLaunchConfigurationsPaginator

describeLaunchConfigurationsPaginator

describeLifecycleHookTypes

describeLifecycleHookTypes