Package software.amazon.awssdk.services.securityhub

Interface SecurityHubAsyncClient

All Superinterfaces:
AutoCloseable, AwsClient, SdkAutoCloseable, SdkClient
@Generated("software.amazon.awssdk:codegen") @ThreadSafe public interface SecurityHubAsyncClient extends AwsClient
Service client for accessing AWS SecurityHub asynchronously. This can be created using the static builder() method.

Security Hub provides you with a comprehensive view of the security state of your Amazon Web Services environment and resources. It also provides you with the readiness status of your environment based on controls from supported security standards. Security Hub collects security data from Amazon Web Services accounts, services, and integrated third-party products and helps you analyze security trends in your environment to identify the highest priority security issues. For more information about Security Hub, see the Security Hub User Guide .

When you use operations in the Security Hub API, the requests are executed only in the Amazon Web Services Region that is currently active or in the specific Amazon Web Services Region that you specify in your request. Any configuration or settings change that results from the operation is applied only to that Region. To make the same change in other Regions, run the same command for each Region in which you want to apply the change.

For example, if your Region is set to us-west-2, when you use CreateMembers to add a member account to Security Hub, the association of the member account with the administrator account is created only in the us-west-2 Region. Security Hub must be enabled for the member account in the same Region that the invitation was sent from.

The following throttling limits apply to using Security Hub API operations.

  • BatchEnableStandards - RateLimit of 1 request per second. BurstLimit of 1 request per second.

  • GetFindings - RateLimit of 3 requests per second. BurstLimit of 6 requests per second.

  • BatchImportFindings - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.

  • BatchUpdateFindings - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.

  • UpdateStandardsControl - RateLimit of 1 request per second. BurstLimit of 5 requests per second.

  • All other operations - RateLimit of 10 requests per second. BurstLimit of 30 requests per second.

  • Field Details

  • Method Details

    • acceptAdministratorInvitation

      default CompletableFuture<AcceptAdministratorInvitationResponse> acceptAdministratorInvitation(AcceptAdministratorInvitationRequest acceptAdministratorInvitationRequest)

      Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.

      This operation is only used by member accounts that are not added through Organizations.

      When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.

      Parameters:
      acceptAdministratorInvitationRequest -
      Returns:
      A Java Future containing the result of the AcceptAdministratorInvitation operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • acceptAdministratorInvitation

      default CompletableFuture<AcceptAdministratorInvitationResponse> acceptAdministratorInvitation(Consumer<AcceptAdministratorInvitationRequest.Builder> acceptAdministratorInvitationRequest)

      Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.

      This operation is only used by member accounts that are not added through Organizations.

      When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.


      This is a convenience which creates an instance of the AcceptAdministratorInvitationRequest.Builder avoiding the need to create one manually via AcceptAdministratorInvitationRequest.builder()

      Parameters:
      acceptAdministratorInvitationRequest - A Consumer that will call methods on AcceptAdministratorInvitationRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the AcceptAdministratorInvitation operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • acceptInvitation

      @Deprecated default CompletableFuture<AcceptInvitationResponse> acceptInvitation(AcceptInvitationRequest acceptInvitationRequest)
      Deprecated.
      This API has been deprecated, use AcceptAdministratorInvitation API instead.

      This method is deprecated. Instead, use AcceptAdministratorInvitation.

      The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation.

      Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.

      This operation is only used by member accounts that are not added through Organizations.

      When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.

      Parameters:
      acceptInvitationRequest -
      Returns:
      A Java Future containing the result of the AcceptInvitation operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • acceptInvitation

      @Deprecated default CompletableFuture<AcceptInvitationResponse> acceptInvitation(Consumer<AcceptInvitationRequest.Builder> acceptInvitationRequest)
      Deprecated.
      This API has been deprecated, use AcceptAdministratorInvitation API instead.

      This method is deprecated. Instead, use AcceptAdministratorInvitation.

      The Security Hub console continues to use AcceptInvitation. It will eventually change to use AcceptAdministratorInvitation. Any IAM policies that specifically control access to this function must continue to use AcceptInvitation. You should also add AcceptAdministratorInvitation to your policies to ensure that the correct permissions are in place after the console begins to use AcceptAdministratorInvitation.

      Accepts the invitation to be a member account and be monitored by the Security Hub administrator account that the invitation was sent from.

      This operation is only used by member accounts that are not added through Organizations.

      When the member account accepts the invitation, permission is granted to the administrator account to view findings generated in the member account.


      This is a convenience which creates an instance of the AcceptInvitationRequest.Builder avoiding the need to create one manually via AcceptInvitationRequest.builder()

      Parameters:
      acceptInvitationRequest - A Consumer that will call methods on AcceptInvitationRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the AcceptInvitation operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchDeleteAutomationRules

      default CompletableFuture<BatchDeleteAutomationRulesResponse> batchDeleteAutomationRules(BatchDeleteAutomationRulesRequest batchDeleteAutomationRulesRequest)

      Deletes one or more automation rules.

      Parameters:
      batchDeleteAutomationRulesRequest -
      Returns:
      A Java Future containing the result of the BatchDeleteAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchDeleteAutomationRules

      default CompletableFuture<BatchDeleteAutomationRulesResponse> batchDeleteAutomationRules(Consumer<BatchDeleteAutomationRulesRequest.Builder> batchDeleteAutomationRulesRequest)

      Deletes one or more automation rules.


      This is a convenience which creates an instance of the BatchDeleteAutomationRulesRequest.Builder avoiding the need to create one manually via BatchDeleteAutomationRulesRequest.builder()

      Parameters:
      batchDeleteAutomationRulesRequest - A Consumer that will call methods on BatchDeleteAutomationRulesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchDeleteAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchDisableStandards

      default CompletableFuture<BatchDisableStandardsResponse> batchDisableStandards(BatchDisableStandardsRequest batchDisableStandardsRequest)

      Disables the standards specified by the provided StandardsSubscriptionArns.

      For more information, see Security Standards section of the Security Hub User Guide.

      Parameters:
      batchDisableStandardsRequest -
      Returns:
      A Java Future containing the result of the BatchDisableStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchDisableStandards

      default CompletableFuture<BatchDisableStandardsResponse> batchDisableStandards(Consumer<BatchDisableStandardsRequest.Builder> batchDisableStandardsRequest)

      Disables the standards specified by the provided StandardsSubscriptionArns.

      For more information, see Security Standards section of the Security Hub User Guide.


      This is a convenience which creates an instance of the BatchDisableStandardsRequest.Builder avoiding the need to create one manually via BatchDisableStandardsRequest.builder()

      Parameters:
      batchDisableStandardsRequest - A Consumer that will call methods on BatchDisableStandardsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchDisableStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchEnableStandards

      default CompletableFuture<BatchEnableStandardsResponse> batchEnableStandards(BatchEnableStandardsRequest batchEnableStandardsRequest)

      Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation.

      For more information, see the Security Standards section of the Security Hub User Guide.

      Parameters:
      batchEnableStandardsRequest -
      Returns:
      A Java Future containing the result of the BatchEnableStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchEnableStandards

      default CompletableFuture<BatchEnableStandardsResponse> batchEnableStandards(Consumer<BatchEnableStandardsRequest.Builder> batchEnableStandardsRequest)

      Enables the standards specified by the provided StandardsArn. To obtain the ARN for a standard, use the DescribeStandards operation.

      For more information, see the Security Standards section of the Security Hub User Guide.


      This is a convenience which creates an instance of the BatchEnableStandardsRequest.Builder avoiding the need to create one manually via BatchEnableStandardsRequest.builder()

      Parameters:
      batchEnableStandardsRequest - A Consumer that will call methods on BatchEnableStandardsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchEnableStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchGetAutomationRules

      default CompletableFuture<BatchGetAutomationRulesResponse> batchGetAutomationRules(BatchGetAutomationRulesRequest batchGetAutomationRulesRequest)

      Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs).

      Parameters:
      batchGetAutomationRulesRequest -
      Returns:
      A Java Future containing the result of the BatchGetAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchGetAutomationRules

      default CompletableFuture<BatchGetAutomationRulesResponse> batchGetAutomationRules(Consumer<BatchGetAutomationRulesRequest.Builder> batchGetAutomationRulesRequest)

      Retrieves a list of details for automation rules based on rule Amazon Resource Names (ARNs).


      This is a convenience which creates an instance of the BatchGetAutomationRulesRequest.Builder avoiding the need to create one manually via BatchGetAutomationRulesRequest.builder()

      Parameters:
      batchGetAutomationRulesRequest - A Consumer that will call methods on BatchGetAutomationRulesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchGetAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchGetSecurityControls

      default CompletableFuture<BatchGetSecurityControlsResponse> batchGetSecurityControls(BatchGetSecurityControlsRequest batchGetSecurityControlsRequest)

      Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region.

      Parameters:
      batchGetSecurityControlsRequest -
      Returns:
      A Java Future containing the result of the BatchGetSecurityControls operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchGetSecurityControls

      default CompletableFuture<BatchGetSecurityControlsResponse> batchGetSecurityControls(Consumer<BatchGetSecurityControlsRequest.Builder> batchGetSecurityControlsRequest)

      Provides details about a batch of security controls for the current Amazon Web Services account and Amazon Web Services Region.


      This is a convenience which creates an instance of the BatchGetSecurityControlsRequest.Builder avoiding the need to create one manually via BatchGetSecurityControlsRequest.builder()

      Parameters:
      batchGetSecurityControlsRequest - A Consumer that will call methods on BatchGetSecurityControlsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchGetSecurityControls operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchGetStandardsControlAssociations

      default CompletableFuture<BatchGetStandardsControlAssociationsResponse> batchGetStandardsControlAssociations(BatchGetStandardsControlAssociationsRequest batchGetStandardsControlAssociationsRequest)

      For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard.

      Parameters:
      batchGetStandardsControlAssociationsRequest -
      Returns:
      A Java Future containing the result of the BatchGetStandardsControlAssociations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchGetStandardsControlAssociations

      default CompletableFuture<BatchGetStandardsControlAssociationsResponse> batchGetStandardsControlAssociations(Consumer<BatchGetStandardsControlAssociationsRequest.Builder> batchGetStandardsControlAssociationsRequest)

      For a batch of security controls and standards, identifies whether each control is currently enabled or disabled in a standard.


      This is a convenience which creates an instance of the BatchGetStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via BatchGetStandardsControlAssociationsRequest.builder()

      Parameters:
      batchGetStandardsControlAssociationsRequest - A Consumer that will call methods on BatchGetStandardsControlAssociationsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchGetStandardsControlAssociations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchImportFindings

      default CompletableFuture<BatchImportFindingsResponse> batchImportFindings(BatchImportFindingsRequest batchImportFindingsRequest)

      Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub.

      BatchImportFindings must be called by one of the following:

      • The Amazon Web Services account that is associated with a finding if you are using the default product ARN or are a partner sending findings from within a customer's Amazon Web Services account. In these cases, the identifier of the account that you are calling BatchImportFindings from needs to be the same as the AwsAccountId attribute for the finding.

      • An Amazon Web Services account that Security Hub has allow-listed for an official partner integration. In this case, you can call BatchImportFindings from the allow-listed account and send findings from different customer accounts in the same batch.

      The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.

      After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.

      • Note

      • UserDefinedFields

      • VerificationState

      • Workflow

      Finding providers also should not use BatchImportFindings to update the following attributes.

      • Confidence

      • Criticality

      • RelatedFindings

      • Severity

      • Types

      Instead, finding providers use FindingProviderFields to provide values for these attributes.

      Parameters:
      batchImportFindingsRequest -
      Returns:
      A Java Future containing the result of the BatchImportFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchImportFindings

      default CompletableFuture<BatchImportFindingsResponse> batchImportFindings(Consumer<BatchImportFindingsRequest.Builder> batchImportFindingsRequest)

      Imports security findings generated by a finding provider into Security Hub. This action is requested by the finding provider to import its findings into Security Hub.

      BatchImportFindings must be called by one of the following:

      • The Amazon Web Services account that is associated with a finding if you are using the default product ARN or are a partner sending findings from within a customer's Amazon Web Services account. In these cases, the identifier of the account that you are calling BatchImportFindings from needs to be the same as the AwsAccountId attribute for the finding.

      • An Amazon Web Services account that Security Hub has allow-listed for an official partner integration. In this case, you can call BatchImportFindings from the allow-listed account and send findings from different customer accounts in the same batch.

      The maximum allowed size for a finding is 240 Kb. An error is returned for any finding larger than 240 Kb.

      After a finding is created, BatchImportFindings cannot be used to update the following finding fields and objects, which Security Hub customers use to manage their investigation workflow.

      • Note

      • UserDefinedFields

      • VerificationState

      • Workflow

      Finding providers also should not use BatchImportFindings to update the following attributes.

      • Confidence

      • Criticality

      • RelatedFindings

      • Severity

      • Types

      Instead, finding providers use FindingProviderFields to provide values for these attributes.


      This is a convenience which creates an instance of the BatchImportFindingsRequest.Builder avoiding the need to create one manually via BatchImportFindingsRequest.builder()

      Parameters:
      batchImportFindingsRequest - A Consumer that will call methods on BatchImportFindingsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchImportFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchUpdateAutomationRules

      default CompletableFuture<BatchUpdateAutomationRulesResponse> batchUpdateAutomationRules(BatchUpdateAutomationRulesRequest batchUpdateAutomationRulesRequest)

      Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters.

      Parameters:
      batchUpdateAutomationRulesRequest -
      Returns:
      A Java Future containing the result of the BatchUpdateAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchUpdateAutomationRules

      default CompletableFuture<BatchUpdateAutomationRulesResponse> batchUpdateAutomationRules(Consumer<BatchUpdateAutomationRulesRequest.Builder> batchUpdateAutomationRulesRequest)

      Updates one or more automation rules based on rule Amazon Resource Names (ARNs) and input parameters.


      This is a convenience which creates an instance of the BatchUpdateAutomationRulesRequest.Builder avoiding the need to create one manually via BatchUpdateAutomationRulesRequest.builder()

      Parameters:
      batchUpdateAutomationRulesRequest - A Consumer that will call methods on BatchUpdateAutomationRulesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchUpdateAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchUpdateFindings

      default CompletableFuture<BatchUpdateFindingsResponse> batchUpdateFindings(BatchUpdateFindingsRequest batchUpdateFindingsRequest)

      Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.

      Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.

      Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects.

      • Confidence

      • Criticality

      • Note

      • RelatedFindings

      • Severity

      • Types

      • UserDefinedFields

      • VerificationState

      • Workflow

      You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide.

      Parameters:
      batchUpdateFindingsRequest -
      Returns:
      A Java Future containing the result of the BatchUpdateFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchUpdateFindings

      default CompletableFuture<BatchUpdateFindingsResponse> batchUpdateFindings(Consumer<BatchUpdateFindingsRequest.Builder> batchUpdateFindingsRequest)

      Used by Security Hub customers to update information about their investigation into a finding. Requested by administrator accounts or member accounts. Administrator accounts can update findings for their account and their member accounts. Member accounts can update findings for their account.

      Updates from BatchUpdateFindings do not affect the value of UpdatedAt for a finding.

      Administrator and member accounts can use BatchUpdateFindings to update the following finding fields and objects.

      • Confidence

      • Criticality

      • Note

      • RelatedFindings

      • Severity

      • Types

      • UserDefinedFields

      • VerificationState

      • Workflow

      You can configure IAM policies to restrict access to fields and field values. For example, you might not want member accounts to be able to suppress findings or change the finding severity. See Configuring access to BatchUpdateFindings in the Security Hub User Guide.


      This is a convenience which creates an instance of the BatchUpdateFindingsRequest.Builder avoiding the need to create one manually via BatchUpdateFindingsRequest.builder()

      Parameters:
      batchUpdateFindingsRequest - A Consumer that will call methods on BatchUpdateFindingsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchUpdateFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchUpdateStandardsControlAssociations

      default CompletableFuture<BatchUpdateStandardsControlAssociationsResponse> batchUpdateStandardsControlAssociations(BatchUpdateStandardsControlAssociationsRequest batchUpdateStandardsControlAssociationsRequest)

      For a batch of security controls and standards, this operation updates the enablement status of a control in a standard.

      Parameters:
      batchUpdateStandardsControlAssociationsRequest -
      Returns:
      A Java Future containing the result of the BatchUpdateStandardsControlAssociations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • batchUpdateStandardsControlAssociations

      default CompletableFuture<BatchUpdateStandardsControlAssociationsResponse> batchUpdateStandardsControlAssociations(Consumer<BatchUpdateStandardsControlAssociationsRequest.Builder> batchUpdateStandardsControlAssociationsRequest)

      For a batch of security controls and standards, this operation updates the enablement status of a control in a standard.


      This is a convenience which creates an instance of the BatchUpdateStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via BatchUpdateStandardsControlAssociationsRequest.builder()

      Parameters:
      batchUpdateStandardsControlAssociationsRequest - A Consumer that will call methods on BatchUpdateStandardsControlAssociationsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the BatchUpdateStandardsControlAssociations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createActionTarget

      default CompletableFuture<CreateActionTargetResponse> createActionTarget(CreateActionTargetRequest createActionTargetRequest)

      Creates a custom action target in Security Hub.

      You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.

      Parameters:
      createActionTargetRequest -
      Returns:
      A Java Future containing the result of the CreateActionTarget operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createActionTarget

      default CompletableFuture<CreateActionTargetResponse> createActionTarget(Consumer<CreateActionTargetRequest.Builder> createActionTargetRequest)

      Creates a custom action target in Security Hub.

      You can use custom actions on findings and insights in Security Hub to trigger target actions in Amazon CloudWatch Events.


      This is a convenience which creates an instance of the CreateActionTargetRequest.Builder avoiding the need to create one manually via CreateActionTargetRequest.builder()

      Parameters:
      createActionTargetRequest - A Consumer that will call methods on CreateActionTargetRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateActionTarget operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createAutomationRule

      default CompletableFuture<CreateAutomationRuleResponse> createAutomationRule(CreateAutomationRuleRequest createAutomationRuleRequest)

      Creates an automation rule based on input parameters.

      Parameters:
      createAutomationRuleRequest -
      Returns:
      A Java Future containing the result of the CreateAutomationRule operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createAutomationRule

      default CompletableFuture<CreateAutomationRuleResponse> createAutomationRule(Consumer<CreateAutomationRuleRequest.Builder> createAutomationRuleRequest)

      Creates an automation rule based on input parameters.


      This is a convenience which creates an instance of the CreateAutomationRuleRequest.Builder avoiding the need to create one manually via CreateAutomationRuleRequest.builder()

      Parameters:
      createAutomationRuleRequest - A Consumer that will call methods on CreateAutomationRuleRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateAutomationRule operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createFindingAggregator

      default CompletableFuture<CreateFindingAggregatorResponse> createFindingAggregator(CreateFindingAggregatorRequest createFindingAggregatorRequest)

      Used to enable finding aggregation. Must be called from the aggregation Region.

      For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide.

      Parameters:
      createFindingAggregatorRequest -
      Returns:
      A Java Future containing the result of the CreateFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createFindingAggregator

      default CompletableFuture<CreateFindingAggregatorResponse> createFindingAggregator(Consumer<CreateFindingAggregatorRequest.Builder> createFindingAggregatorRequest)

      Used to enable finding aggregation. Must be called from the aggregation Region.

      For more details about cross-Region replication, see Configuring finding aggregation in the Security Hub User Guide.


      This is a convenience which creates an instance of the CreateFindingAggregatorRequest.Builder avoiding the need to create one manually via CreateFindingAggregatorRequest.builder()

      Parameters:
      createFindingAggregatorRequest - A Consumer that will call methods on CreateFindingAggregatorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createInsight

      default CompletableFuture<CreateInsightResponse> createInsight(CreateInsightRequest createInsightRequest)

      Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.

      To group the related findings in the insight, use the GroupByAttribute.

      Parameters:
      createInsightRequest -
      Returns:
      A Java Future containing the result of the CreateInsight operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createInsight

      default CompletableFuture<CreateInsightResponse> createInsight(Consumer<CreateInsightRequest.Builder> createInsightRequest)

      Creates a custom insight in Security Hub. An insight is a consolidation of findings that relate to a security issue that requires attention or remediation.

      To group the related findings in the insight, use the GroupByAttribute.


      This is a convenience which creates an instance of the CreateInsightRequest.Builder avoiding the need to create one manually via CreateInsightRequest.builder()

      Parameters:
      createInsightRequest - A Consumer that will call methods on CreateInsightRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateInsight operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createMembers

      default CompletableFuture<CreateMembersResponse> createMembers(CreateMembersRequest createMembersRequest)

      Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account.

      CreateMembers is always used to add accounts that are not organization members.

      For accounts that are managed using Organizations, CreateMembers is only used in the following cases:

      • Security Hub is not configured to automatically add new organization accounts.

      • The account was disassociated or deleted in Security Hub.

      This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation.

      For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub.

      Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub.

      • If the organization account does not have Security Hub enabled, then Security Hub and the default standards are automatically enabled. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account.

      • For organization accounts that already have Security Hub enabled, Security Hub does not make any other changes to those accounts. It does not change their enabled standards or controls.

      A permissions policy is added that permits the administrator account to view the findings generated in the member account.

      To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation.

      Parameters:
      createMembersRequest -
      Returns:
      A Java Future containing the result of the CreateMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • createMembers

      default CompletableFuture<CreateMembersResponse> createMembers(Consumer<CreateMembersRequest.Builder> createMembersRequest)

      Creates a member association in Security Hub between the specified accounts and the account used to make the request, which is the administrator account. If you are integrated with Organizations, then the administrator account is designated by the organization management account.

      CreateMembers is always used to add accounts that are not organization members.

      For accounts that are managed using Organizations, CreateMembers is only used in the following cases:

      • Security Hub is not configured to automatically add new organization accounts.

      • The account was disassociated or deleted in Security Hub.

      This action can only be used by an account that has Security Hub enabled. To enable Security Hub, you can use the EnableSecurityHub operation.

      For accounts that are not organization members, you create the account association and then send an invitation to the member account. To send the invitation, you use the InviteMembers operation. If the account owner accepts the invitation, the account becomes a member account in Security Hub.

      Accounts that are managed using Organizations do not receive an invitation. They automatically become a member account in Security Hub.

      • If the organization account does not have Security Hub enabled, then Security Hub and the default standards are automatically enabled. Note that Security Hub cannot be enabled automatically for the organization management account. The organization management account must enable Security Hub before the administrator account enables it as a member account.

      • For organization accounts that already have Security Hub enabled, Security Hub does not make any other changes to those accounts. It does not change their enabled standards or controls.

      A permissions policy is added that permits the administrator account to view the findings generated in the member account.

      To remove the association between the administrator and member accounts, use the DisassociateFromMasterAccount or DisassociateMembers operation.


      This is a convenience which creates an instance of the CreateMembersRequest.Builder avoiding the need to create one manually via CreateMembersRequest.builder()

      Parameters:
      createMembersRequest - A Consumer that will call methods on CreateMembersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the CreateMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • declineInvitations

      default CompletableFuture<DeclineInvitationsResponse> declineInvitations(DeclineInvitationsRequest declineInvitationsRequest)

      Declines invitations to become a member account.

      A prospective member account uses this operation to decline an invitation to become a member.

      This operation is only called by member accounts that aren't part of an organization. Organization accounts don't receive invitations.

      Parameters:
      declineInvitationsRequest -
      Returns:
      A Java Future containing the result of the DeclineInvitations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • declineInvitations

      default CompletableFuture<DeclineInvitationsResponse> declineInvitations(Consumer<DeclineInvitationsRequest.Builder> declineInvitationsRequest)

      Declines invitations to become a member account.

      A prospective member account uses this operation to decline an invitation to become a member.

      This operation is only called by member accounts that aren't part of an organization. Organization accounts don't receive invitations.


      This is a convenience which creates an instance of the DeclineInvitationsRequest.Builder avoiding the need to create one manually via DeclineInvitationsRequest.builder()

      Parameters:
      declineInvitationsRequest - A Consumer that will call methods on DeclineInvitationsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeclineInvitations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteActionTarget

      default CompletableFuture<DeleteActionTargetResponse> deleteActionTarget(DeleteActionTargetRequest deleteActionTargetRequest)

      Deletes a custom action target from Security Hub.

      Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.

      Parameters:
      deleteActionTargetRequest -
      Returns:
      A Java Future containing the result of the DeleteActionTarget operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteActionTarget

      default CompletableFuture<DeleteActionTargetResponse> deleteActionTarget(Consumer<DeleteActionTargetRequest.Builder> deleteActionTargetRequest)

      Deletes a custom action target from Security Hub.

      Deleting a custom action target does not affect any findings or insights that were already sent to Amazon CloudWatch Events using the custom action.


      This is a convenience which creates an instance of the DeleteActionTargetRequest.Builder avoiding the need to create one manually via DeleteActionTargetRequest.builder()

      Parameters:
      deleteActionTargetRequest - A Consumer that will call methods on DeleteActionTargetRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteActionTarget operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteFindingAggregator

      default CompletableFuture<DeleteFindingAggregatorResponse> deleteFindingAggregator(DeleteFindingAggregatorRequest deleteFindingAggregatorRequest)

      Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation.

      When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated.

      Parameters:
      deleteFindingAggregatorRequest -
      Returns:
      A Java Future containing the result of the DeleteFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteFindingAggregator

      default CompletableFuture<DeleteFindingAggregatorResponse> deleteFindingAggregator(Consumer<DeleteFindingAggregatorRequest.Builder> deleteFindingAggregatorRequest)

      Deletes a finding aggregator. When you delete the finding aggregator, you stop finding aggregation.

      When you stop finding aggregation, findings that were already aggregated to the aggregation Region are still visible from the aggregation Region. New findings and finding updates are not aggregated.


      This is a convenience which creates an instance of the DeleteFindingAggregatorRequest.Builder avoiding the need to create one manually via DeleteFindingAggregatorRequest.builder()

      Parameters:
      deleteFindingAggregatorRequest - A Consumer that will call methods on DeleteFindingAggregatorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteInsight

      default CompletableFuture<DeleteInsightResponse> deleteInsight(DeleteInsightRequest deleteInsightRequest)

      Deletes the insight specified by the InsightArn.

      Parameters:
      deleteInsightRequest -
      Returns:
      A Java Future containing the result of the DeleteInsight operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteInsight

      default CompletableFuture<DeleteInsightResponse> deleteInsight(Consumer<DeleteInsightRequest.Builder> deleteInsightRequest)

      Deletes the insight specified by the InsightArn.


      This is a convenience which creates an instance of the DeleteInsightRequest.Builder avoiding the need to create one manually via DeleteInsightRequest.builder()

      Parameters:
      deleteInsightRequest - A Consumer that will call methods on DeleteInsightRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteInsight operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteInvitations

      default CompletableFuture<DeleteInvitationsResponse> deleteInvitations(DeleteInvitationsRequest deleteInvitationsRequest)

      Deletes invitations received by the Amazon Web Services account to become a member account.

      A Security Hub administrator account can use this operation to delete invitations sent to one or more member accounts.

      This operation is only used to delete invitations that are sent to member accounts that aren't part of an organization. Organization accounts don't receive invitations.

      Parameters:
      deleteInvitationsRequest -
      Returns:
      A Java Future containing the result of the DeleteInvitations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteInvitations

      default CompletableFuture<DeleteInvitationsResponse> deleteInvitations(Consumer<DeleteInvitationsRequest.Builder> deleteInvitationsRequest)

      Deletes invitations received by the Amazon Web Services account to become a member account.

      A Security Hub administrator account can use this operation to delete invitations sent to one or more member accounts.

      This operation is only used to delete invitations that are sent to member accounts that aren't part of an organization. Organization accounts don't receive invitations.


      This is a convenience which creates an instance of the DeleteInvitationsRequest.Builder avoiding the need to create one manually via DeleteInvitationsRequest.builder()

      Parameters:
      deleteInvitationsRequest - A Consumer that will call methods on DeleteInvitationsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteInvitations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteMembers

      default CompletableFuture<DeleteMembersResponse> deleteMembers(DeleteMembersRequest deleteMembersRequest)

      Deletes the specified member accounts from Security Hub.

      You can invoke this API only to delete accounts that became members through invitation. You can't invoke this API to delete accounts that belong to an Organizations organization.

      Parameters:
      deleteMembersRequest -
      Returns:
      A Java Future containing the result of the DeleteMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • deleteMembers

      default CompletableFuture<DeleteMembersResponse> deleteMembers(Consumer<DeleteMembersRequest.Builder> deleteMembersRequest)

      Deletes the specified member accounts from Security Hub.

      You can invoke this API only to delete accounts that became members through invitation. You can't invoke this API to delete accounts that belong to an Organizations organization.


      This is a convenience which creates an instance of the DeleteMembersRequest.Builder avoiding the need to create one manually via DeleteMembersRequest.builder()

      Parameters:
      deleteMembersRequest - A Consumer that will call methods on DeleteMembersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DeleteMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeActionTargets

      default CompletableFuture<DescribeActionTargetsResponse> describeActionTargets(DescribeActionTargetsRequest describeActionTargetsRequest)

      Returns a list of the custom action targets in Security Hub in your account.

      Parameters:
      describeActionTargetsRequest -
      Returns:
      A Java Future containing the result of the DescribeActionTargets operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeActionTargets

      default CompletableFuture<DescribeActionTargetsResponse> describeActionTargets(Consumer<DescribeActionTargetsRequest.Builder> describeActionTargetsRequest)

      Returns a list of the custom action targets in Security Hub in your account.


      This is a convenience which creates an instance of the DescribeActionTargetsRequest.Builder avoiding the need to create one manually via DescribeActionTargetsRequest.builder()

      Parameters:
      describeActionTargetsRequest - A Consumer that will call methods on DescribeActionTargetsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeActionTargets operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeActionTargetsPaginator

      default DescribeActionTargetsPublisher describeActionTargetsPaginator(DescribeActionTargetsRequest describeActionTargetsRequest)

      Returns a list of the custom action targets in Security Hub in your account.


      This is a variant of describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsPublisher publisher = client.describeActionTargetsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsPublisher publisher = client.describeActionTargetsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation.

      Parameters:
      describeActionTargetsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeActionTargetsPaginator

      default DescribeActionTargetsPublisher describeActionTargetsPaginator(Consumer<DescribeActionTargetsRequest.Builder> describeActionTargetsRequest)

      Returns a list of the custom action targets in Security Hub in your account.


      This is a variant of describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsPublisher publisher = client.describeActionTargetsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeActionTargetsPublisher publisher = client.describeActionTargetsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeActionTargets(software.amazon.awssdk.services.securityhub.model.DescribeActionTargetsRequest) operation.

      This is a convenience which creates an instance of the DescribeActionTargetsRequest.Builder avoiding the need to create one manually via DescribeActionTargetsRequest.builder()

      Parameters:
      describeActionTargetsRequest - A Consumer that will call methods on DescribeActionTargetsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeHub

      default CompletableFuture<DescribeHubResponse> describeHub(DescribeHubRequest describeHubRequest)

      Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.

      Parameters:
      describeHubRequest -
      Returns:
      A Java Future containing the result of the DescribeHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeHub

      default CompletableFuture<DescribeHubResponse> describeHub(Consumer<DescribeHubRequest.Builder> describeHubRequest)

      Returns details about the Hub resource in your account, including the HubArn and the time when you enabled Security Hub.


      This is a convenience which creates an instance of the DescribeHubRequest.Builder avoiding the need to create one manually via DescribeHubRequest.builder()

      Parameters:
      describeHubRequest - A Consumer that will call methods on DescribeHubRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeOrganizationConfiguration

      default CompletableFuture<DescribeOrganizationConfigurationResponse> describeOrganizationConfiguration(DescribeOrganizationConfigurationRequest describeOrganizationConfigurationRequest)

      Returns information about the Organizations configuration for Security Hub. Can only be called from a Security Hub administrator account.

      Parameters:
      describeOrganizationConfigurationRequest -
      Returns:
      A Java Future containing the result of the DescribeOrganizationConfiguration operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeOrganizationConfiguration

      default CompletableFuture<DescribeOrganizationConfigurationResponse> describeOrganizationConfiguration(Consumer<DescribeOrganizationConfigurationRequest.Builder> describeOrganizationConfigurationRequest)

      Returns information about the Organizations configuration for Security Hub. Can only be called from a Security Hub administrator account.


      This is a convenience which creates an instance of the DescribeOrganizationConfigurationRequest.Builder avoiding the need to create one manually via DescribeOrganizationConfigurationRequest.builder()

      Parameters:
      describeOrganizationConfigurationRequest - A Consumer that will call methods on DescribeOrganizationConfigurationRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeOrganizationConfiguration operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeProducts

      default CompletableFuture<DescribeProductsResponse> describeProducts(DescribeProductsRequest describeProductsRequest)

      Returns information about product integrations in Security Hub.

      You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.

      If you do not provide an integration ARN, then the results include all of the available product integrations.

      Parameters:
      describeProductsRequest -
      Returns:
      A Java Future containing the result of the DescribeProducts operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeProducts

      default CompletableFuture<DescribeProductsResponse> describeProducts(Consumer<DescribeProductsRequest.Builder> describeProductsRequest)

      Returns information about product integrations in Security Hub.

      You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.

      If you do not provide an integration ARN, then the results include all of the available product integrations.


      This is a convenience which creates an instance of the DescribeProductsRequest.Builder avoiding the need to create one manually via DescribeProductsRequest.builder()

      Parameters:
      describeProductsRequest - A Consumer that will call methods on DescribeProductsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeProducts operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeProductsPaginator

      default DescribeProductsPublisher describeProductsPaginator(DescribeProductsRequest describeProductsRequest)

      Returns information about product integrations in Security Hub.

      You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.

      If you do not provide an integration ARN, then the results include all of the available product integrations.


      This is a variant of describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsPublisher publisher = client.describeProductsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsPublisher publisher = client.describeProductsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeProductsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeProductsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation.

      Parameters:
      describeProductsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeProductsPaginator

      default DescribeProductsPublisher describeProductsPaginator(Consumer<DescribeProductsRequest.Builder> describeProductsRequest)

      Returns information about product integrations in Security Hub.

      You can optionally provide an integration ARN. If you provide an integration ARN, then the results only include that integration.

      If you do not provide an integration ARN, then the results include all of the available product integrations.


      This is a variant of describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsPublisher publisher = client.describeProductsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeProductsPublisher publisher = client.describeProductsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeProductsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeProductsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeProducts(software.amazon.awssdk.services.securityhub.model.DescribeProductsRequest) operation.

      This is a convenience which creates an instance of the DescribeProductsRequest.Builder avoiding the need to create one manually via DescribeProductsRequest.builder()

      Parameters:
      describeProductsRequest - A Consumer that will call methods on DescribeProductsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandards

      default CompletableFuture<DescribeStandardsResponse> describeStandards(DescribeStandardsRequest describeStandardsRequest)

      Returns a list of the available standards in Security Hub.

      For each standard, the results include the standard ARN, the name, and a description.

      Parameters:
      describeStandardsRequest -
      Returns:
      A Java Future containing the result of the DescribeStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandards

      default CompletableFuture<DescribeStandardsResponse> describeStandards(Consumer<DescribeStandardsRequest.Builder> describeStandardsRequest)

      Returns a list of the available standards in Security Hub.

      For each standard, the results include the standard ARN, the name, and a description.


      This is a convenience which creates an instance of the DescribeStandardsRequest.Builder avoiding the need to create one manually via DescribeStandardsRequest.builder()

      Parameters:
      describeStandardsRequest - A Consumer that will call methods on DescribeStandardsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandardsControls

      default CompletableFuture<DescribeStandardsControlsResponse> describeStandardsControls(DescribeStandardsControlsRequest describeStandardsControlsRequest)

      Returns a list of security standards controls.

      For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.

      Parameters:
      describeStandardsControlsRequest -
      Returns:
      A Java Future containing the result of the DescribeStandardsControls operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandardsControls

      default CompletableFuture<DescribeStandardsControlsResponse> describeStandardsControls(Consumer<DescribeStandardsControlsRequest.Builder> describeStandardsControlsRequest)

      Returns a list of security standards controls.

      For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.


      This is a convenience which creates an instance of the DescribeStandardsControlsRequest.Builder avoiding the need to create one manually via DescribeStandardsControlsRequest.builder()

      Parameters:
      describeStandardsControlsRequest - A Consumer that will call methods on DescribeStandardsControlsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DescribeStandardsControls operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandardsControlsPaginator

      default DescribeStandardsControlsPublisher describeStandardsControlsPaginator(DescribeStandardsControlsRequest describeStandardsControlsRequest)

      Returns a list of security standards controls.

      For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.


      This is a variant of describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsPublisher publisher = client.describeStandardsControlsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsPublisher publisher = client.describeStandardsControlsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation.

      Parameters:
      describeStandardsControlsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandardsControlsPaginator

      default DescribeStandardsControlsPublisher describeStandardsControlsPaginator(Consumer<DescribeStandardsControlsRequest.Builder> describeStandardsControlsRequest)

      Returns a list of security standards controls.

      For each control, the results include information about whether it is currently enabled, the severity, and a link to remediation information.


      This is a variant of describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsPublisher publisher = client.describeStandardsControlsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsControlsPublisher publisher = client.describeStandardsControlsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeStandardsControls(software.amazon.awssdk.services.securityhub.model.DescribeStandardsControlsRequest) operation.

      This is a convenience which creates an instance of the DescribeStandardsControlsRequest.Builder avoiding the need to create one manually via DescribeStandardsControlsRequest.builder()

      Parameters:
      describeStandardsControlsRequest - A Consumer that will call methods on DescribeStandardsControlsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandardsPaginator

      default DescribeStandardsPublisher describeStandardsPaginator(DescribeStandardsRequest describeStandardsRequest)

      Returns a list of the available standards in Security Hub.

      For each standard, the results include the standard ARN, the name, and a description.


      This is a variant of describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsPublisher publisher = client.describeStandardsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsPublisher publisher = client.describeStandardsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeStandardsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeStandardsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation.

      Parameters:
      describeStandardsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • describeStandardsPaginator

      default DescribeStandardsPublisher describeStandardsPaginator(Consumer<DescribeStandardsRequest.Builder> describeStandardsRequest)

      Returns a list of the available standards in Security Hub.

      For each standard, the results include the standard ARN, the name, and a description.


      This is a variant of describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsPublisher publisher = client.describeStandardsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.DescribeStandardsPublisher publisher = client.describeStandardsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.DescribeStandardsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.DescribeStandardsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the describeStandards(software.amazon.awssdk.services.securityhub.model.DescribeStandardsRequest) operation.

      This is a convenience which creates an instance of the DescribeStandardsRequest.Builder avoiding the need to create one manually via DescribeStandardsRequest.builder()

      Parameters:
      describeStandardsRequest - A Consumer that will call methods on DescribeStandardsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disableImportFindingsForProduct

      default CompletableFuture<DisableImportFindingsForProductResponse> disableImportFindingsForProduct(DisableImportFindingsForProductRequest disableImportFindingsForProductRequest)

      Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.

      Parameters:
      disableImportFindingsForProductRequest -
      Returns:
      A Java Future containing the result of the DisableImportFindingsForProduct operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disableImportFindingsForProduct

      default CompletableFuture<DisableImportFindingsForProductResponse> disableImportFindingsForProduct(Consumer<DisableImportFindingsForProductRequest.Builder> disableImportFindingsForProductRequest)

      Disables the integration of the specified product with Security Hub. After the integration is disabled, findings from that product are no longer sent to Security Hub.


      This is a convenience which creates an instance of the DisableImportFindingsForProductRequest.Builder avoiding the need to create one manually via DisableImportFindingsForProductRequest.builder()

      Parameters:
      disableImportFindingsForProductRequest - A Consumer that will call methods on DisableImportFindingsForProductRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DisableImportFindingsForProduct operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disableOrganizationAdminAccount

      default CompletableFuture<DisableOrganizationAdminAccountResponse> disableOrganizationAdminAccount(DisableOrganizationAdminAccountRequest disableOrganizationAdminAccountRequest)

      Disables a Security Hub administrator account. Can only be called by the organization management account.

      Parameters:
      disableOrganizationAdminAccountRequest -
      Returns:
      A Java Future containing the result of the DisableOrganizationAdminAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disableOrganizationAdminAccount

      default CompletableFuture<DisableOrganizationAdminAccountResponse> disableOrganizationAdminAccount(Consumer<DisableOrganizationAdminAccountRequest.Builder> disableOrganizationAdminAccountRequest)

      Disables a Security Hub administrator account. Can only be called by the organization management account.


      This is a convenience which creates an instance of the DisableOrganizationAdminAccountRequest.Builder avoiding the need to create one manually via DisableOrganizationAdminAccountRequest.builder()

      Parameters:
      disableOrganizationAdminAccountRequest - A Consumer that will call methods on DisableOrganizationAdminAccountRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DisableOrganizationAdminAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disableSecurityHub

      default CompletableFuture<DisableSecurityHubResponse> disableSecurityHub(DisableSecurityHubRequest disableSecurityHubRequest)

      Disables Security Hub in your account only in the current Amazon Web Services Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.

      You can't disable Security Hub in an account that is currently the Security Hub administrator.

      When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.

      If you want to save your existing findings, you must export them before you disable Security Hub.

      Parameters:
      disableSecurityHubRequest -
      Returns:
      A Java Future containing the result of the DisableSecurityHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disableSecurityHub

      default CompletableFuture<DisableSecurityHubResponse> disableSecurityHub(Consumer<DisableSecurityHubRequest.Builder> disableSecurityHubRequest)

      Disables Security Hub in your account only in the current Amazon Web Services Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.

      You can't disable Security Hub in an account that is currently the Security Hub administrator.

      When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.

      If you want to save your existing findings, you must export them before you disable Security Hub.


      This is a convenience which creates an instance of the DisableSecurityHubRequest.Builder avoiding the need to create one manually via DisableSecurityHubRequest.builder()

      Parameters:
      disableSecurityHubRequest - A Consumer that will call methods on DisableSecurityHubRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DisableSecurityHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disableSecurityHub

      default CompletableFuture<DisableSecurityHubResponse> disableSecurityHub()

      Disables Security Hub in your account only in the current Amazon Web Services Region. To disable Security Hub in all Regions, you must submit one request per Region where you have enabled Security Hub.

      You can't disable Security Hub in an account that is currently the Security Hub administrator.

      When you disable Security Hub, your existing findings and insights and any Security Hub configuration settings are deleted after 90 days and cannot be recovered. Any standards that were enabled are disabled, and your administrator and member account associations are removed.

      If you want to save your existing findings, you must export them before you disable Security Hub.

      Returns:
      A Java Future containing the result of the DisableSecurityHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateFromAdministratorAccount

      default CompletableFuture<DisassociateFromAdministratorAccountResponse> disassociateFromAdministratorAccount(DisassociateFromAdministratorAccountRequest disassociateFromAdministratorAccountRequest)

      Disassociates the current Security Hub member account from the associated administrator account.

      This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.

      Parameters:
      disassociateFromAdministratorAccountRequest -
      Returns:
      A Java Future containing the result of the DisassociateFromAdministratorAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateFromAdministratorAccount

      default CompletableFuture<DisassociateFromAdministratorAccountResponse> disassociateFromAdministratorAccount(Consumer<DisassociateFromAdministratorAccountRequest.Builder> disassociateFromAdministratorAccountRequest)

      Disassociates the current Security Hub member account from the associated administrator account.

      This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.


      This is a convenience which creates an instance of the DisassociateFromAdministratorAccountRequest.Builder avoiding the need to create one manually via DisassociateFromAdministratorAccountRequest.builder()

      Parameters:
      disassociateFromAdministratorAccountRequest - A Consumer that will call methods on DisassociateFromAdministratorAccountRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DisassociateFromAdministratorAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateFromMasterAccount

      @Deprecated default CompletableFuture<DisassociateFromMasterAccountResponse> disassociateFromMasterAccount(DisassociateFromMasterAccountRequest disassociateFromMasterAccountRequest)
      Deprecated.
      This API has been deprecated, use DisassociateFromAdministratorAccount API instead.

      This method is deprecated. Instead, use DisassociateFromAdministratorAccount.

      The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount.

      Disassociates the current Security Hub member account from the associated administrator account.

      This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.

      Parameters:
      disassociateFromMasterAccountRequest -
      Returns:
      A Java Future containing the result of the DisassociateFromMasterAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateFromMasterAccount

      @Deprecated default CompletableFuture<DisassociateFromMasterAccountResponse> disassociateFromMasterAccount(Consumer<DisassociateFromMasterAccountRequest.Builder> disassociateFromMasterAccountRequest)
      Deprecated.
      This API has been deprecated, use DisassociateFromAdministratorAccount API instead.

      This method is deprecated. Instead, use DisassociateFromAdministratorAccount.

      The Security Hub console continues to use DisassociateFromMasterAccount. It will eventually change to use DisassociateFromAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use DisassociateFromMasterAccount. You should also add DisassociateFromAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use DisassociateFromAdministratorAccount.

      Disassociates the current Security Hub member account from the associated administrator account.

      This operation is only used by accounts that are not part of an organization. For organization accounts, only the administrator account can disassociate a member account.


      This is a convenience which creates an instance of the DisassociateFromMasterAccountRequest.Builder avoiding the need to create one manually via DisassociateFromMasterAccountRequest.builder()

      Parameters:
      disassociateFromMasterAccountRequest - A Consumer that will call methods on DisassociateFromMasterAccountRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DisassociateFromMasterAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateMembers

      default CompletableFuture<DisassociateMembersResponse> disassociateMembers(DisassociateMembersRequest disassociateMembersRequest)

      Disassociates the specified member accounts from the associated administrator account.

      Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually.

      Parameters:
      disassociateMembersRequest -
      Returns:
      A Java Future containing the result of the DisassociateMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • disassociateMembers

      default CompletableFuture<DisassociateMembersResponse> disassociateMembers(Consumer<DisassociateMembersRequest.Builder> disassociateMembersRequest)

      Disassociates the specified member accounts from the associated administrator account.

      Can be used to disassociate both accounts that are managed using Organizations and accounts that were invited manually.


      This is a convenience which creates an instance of the DisassociateMembersRequest.Builder avoiding the need to create one manually via DisassociateMembersRequest.builder()

      Parameters:
      disassociateMembersRequest - A Consumer that will call methods on DisassociateMembersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the DisassociateMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • enableImportFindingsForProduct

      default CompletableFuture<EnableImportFindingsForProductResponse> enableImportFindingsForProduct(EnableImportFindingsForProductRequest enableImportFindingsForProductRequest)

      Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.

      When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.

      Parameters:
      enableImportFindingsForProductRequest -
      Returns:
      A Java Future containing the result of the EnableImportFindingsForProduct operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • enableImportFindingsForProduct

      default CompletableFuture<EnableImportFindingsForProductResponse> enableImportFindingsForProduct(Consumer<EnableImportFindingsForProductRequest.Builder> enableImportFindingsForProductRequest)

      Enables the integration of a partner product with Security Hub. Integrated products send findings to Security Hub.

      When you enable a product integration, a permissions policy that grants permission for the product to send findings to Security Hub is applied.


      This is a convenience which creates an instance of the EnableImportFindingsForProductRequest.Builder avoiding the need to create one manually via EnableImportFindingsForProductRequest.builder()

      Parameters:
      enableImportFindingsForProductRequest - A Consumer that will call methods on EnableImportFindingsForProductRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the EnableImportFindingsForProduct operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • enableOrganizationAdminAccount

      default CompletableFuture<EnableOrganizationAdminAccountResponse> enableOrganizationAdminAccount(EnableOrganizationAdminAccountRequest enableOrganizationAdminAccountRequest)

      Designates the Security Hub administrator account for an organization. Can only be called by the organization management account.

      Parameters:
      enableOrganizationAdminAccountRequest -
      Returns:
      A Java Future containing the result of the EnableOrganizationAdminAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • enableOrganizationAdminAccount

      default CompletableFuture<EnableOrganizationAdminAccountResponse> enableOrganizationAdminAccount(Consumer<EnableOrganizationAdminAccountRequest.Builder> enableOrganizationAdminAccountRequest)

      Designates the Security Hub administrator account for an organization. Can only be called by the organization management account.


      This is a convenience which creates an instance of the EnableOrganizationAdminAccountRequest.Builder avoiding the need to create one manually via EnableOrganizationAdminAccountRequest.builder()

      Parameters:
      enableOrganizationAdminAccountRequest - A Consumer that will call methods on EnableOrganizationAdminAccountRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the EnableOrganizationAdminAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • enableSecurityHub

      default CompletableFuture<EnableSecurityHubResponse> enableSecurityHub(EnableSecurityHubRequest enableSecurityHubRequest)

      Enables Security Hub for your account in the current Region or the Region you specify in the request.

      When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.

      When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards:

      • Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0

      • Amazon Web Services Foundational Security Best Practices

      Other standards are not automatically enabled.

      To opt out of automatically enabled standards, set EnableDefaultStandards to false.

      After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.

      To learn more, see the setup information in the Security Hub User Guide.

      Parameters:
      enableSecurityHubRequest -
      Returns:
      A Java Future containing the result of the EnableSecurityHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • enableSecurityHub

      default CompletableFuture<EnableSecurityHubResponse> enableSecurityHub(Consumer<EnableSecurityHubRequest.Builder> enableSecurityHubRequest)

      Enables Security Hub for your account in the current Region or the Region you specify in the request.

      When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.

      When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards:

      • Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0

      • Amazon Web Services Foundational Security Best Practices

      Other standards are not automatically enabled.

      To opt out of automatically enabled standards, set EnableDefaultStandards to false.

      After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.

      To learn more, see the setup information in the Security Hub User Guide.


      This is a convenience which creates an instance of the EnableSecurityHubRequest.Builder avoiding the need to create one manually via EnableSecurityHubRequest.builder()

      Parameters:
      enableSecurityHubRequest - A Consumer that will call methods on EnableSecurityHubRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the EnableSecurityHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • enableSecurityHub

      default CompletableFuture<EnableSecurityHubResponse> enableSecurityHub()

      Enables Security Hub for your account in the current Region or the Region you specify in the request.

      When you enable Security Hub, you grant to Security Hub the permissions necessary to gather findings from other services that are integrated with Security Hub.

      When you use the EnableSecurityHub operation to enable Security Hub, you also automatically enable the following standards:

      • Center for Internet Security (CIS) Amazon Web Services Foundations Benchmark v1.2.0

      • Amazon Web Services Foundational Security Best Practices

      Other standards are not automatically enabled.

      To opt out of automatically enabled standards, set EnableDefaultStandards to false.

      After you enable Security Hub, to enable a standard, use the BatchEnableStandards operation. To disable a standard, use the BatchDisableStandards operation.

      To learn more, see the setup information in the Security Hub User Guide.

      Returns:
      A Java Future containing the result of the EnableSecurityHub operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceConflictException The resource specified in the request conflicts with an existing resource.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getAdministratorAccount

      default CompletableFuture<GetAdministratorAccountResponse> getAdministratorAccount(GetAdministratorAccountRequest getAdministratorAccountRequest)

      Provides the details for the Security Hub administrator account for the current member account.

      Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.

      Parameters:
      getAdministratorAccountRequest -
      Returns:
      A Java Future containing the result of the GetAdministratorAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getAdministratorAccount

      default CompletableFuture<GetAdministratorAccountResponse> getAdministratorAccount(Consumer<GetAdministratorAccountRequest.Builder> getAdministratorAccountRequest)

      Provides the details for the Security Hub administrator account for the current member account.

      Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.


      This is a convenience which creates an instance of the GetAdministratorAccountRequest.Builder avoiding the need to create one manually via GetAdministratorAccountRequest.builder()

      Parameters:
      getAdministratorAccountRequest - A Consumer that will call methods on GetAdministratorAccountRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetAdministratorAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getEnabledStandards

      default CompletableFuture<GetEnabledStandardsResponse> getEnabledStandards(GetEnabledStandardsRequest getEnabledStandardsRequest)

      Returns a list of the standards that are currently enabled.

      Parameters:
      getEnabledStandardsRequest -
      Returns:
      A Java Future containing the result of the GetEnabledStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getEnabledStandards

      default CompletableFuture<GetEnabledStandardsResponse> getEnabledStandards(Consumer<GetEnabledStandardsRequest.Builder> getEnabledStandardsRequest)

      Returns a list of the standards that are currently enabled.


      This is a convenience which creates an instance of the GetEnabledStandardsRequest.Builder avoiding the need to create one manually via GetEnabledStandardsRequest.builder()

      Parameters:
      getEnabledStandardsRequest - A Consumer that will call methods on GetEnabledStandardsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetEnabledStandards operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getEnabledStandardsPaginator

      default GetEnabledStandardsPublisher getEnabledStandardsPaginator(GetEnabledStandardsRequest getEnabledStandardsRequest)

      Returns a list of the standards that are currently enabled.


      This is a variant of getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsPublisher publisher = client.getEnabledStandardsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsPublisher publisher = client.getEnabledStandardsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation.

      Parameters:
      getEnabledStandardsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getEnabledStandardsPaginator

      default GetEnabledStandardsPublisher getEnabledStandardsPaginator(Consumer<GetEnabledStandardsRequest.Builder> getEnabledStandardsRequest)

      Returns a list of the standards that are currently enabled.


      This is a variant of getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsPublisher publisher = client.getEnabledStandardsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetEnabledStandardsPublisher publisher = client.getEnabledStandardsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getEnabledStandards(software.amazon.awssdk.services.securityhub.model.GetEnabledStandardsRequest) operation.

      This is a convenience which creates an instance of the GetEnabledStandardsRequest.Builder avoiding the need to create one manually via GetEnabledStandardsRequest.builder()

      Parameters:
      getEnabledStandardsRequest - A Consumer that will call methods on GetEnabledStandardsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingAggregator

      default CompletableFuture<GetFindingAggregatorResponse> getFindingAggregator(GetFindingAggregatorRequest getFindingAggregatorRequest)

      Returns the current finding aggregation configuration.

      Parameters:
      getFindingAggregatorRequest -
      Returns:
      A Java Future containing the result of the GetFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingAggregator

      default CompletableFuture<GetFindingAggregatorResponse> getFindingAggregator(Consumer<GetFindingAggregatorRequest.Builder> getFindingAggregatorRequest)

      Returns the current finding aggregation configuration.


      This is a convenience which creates an instance of the GetFindingAggregatorRequest.Builder avoiding the need to create one manually via GetFindingAggregatorRequest.builder()

      Parameters:
      getFindingAggregatorRequest - A Consumer that will call methods on GetFindingAggregatorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingHistory

      default CompletableFuture<GetFindingHistoryResponse> getFindingHistory(GetFindingHistoryRequest getFindingHistoryRequest)

      Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).

      Parameters:
      getFindingHistoryRequest -
      Returns:
      A Java Future containing the result of the GetFindingHistory operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingHistory

      default CompletableFuture<GetFindingHistoryResponse> getFindingHistory(Consumer<GetFindingHistoryRequest.Builder> getFindingHistoryRequest)

      Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).


      This is a convenience which creates an instance of the GetFindingHistoryRequest.Builder avoiding the need to create one manually via GetFindingHistoryRequest.builder()

      Parameters:
      getFindingHistoryRequest - A Consumer that will call methods on GetFindingHistoryRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetFindingHistory operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingHistoryPaginator

      default GetFindingHistoryPublisher getFindingHistoryPaginator(GetFindingHistoryRequest getFindingHistoryRequest)

      Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).


      This is a variant of getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryPublisher publisher = client.getFindingHistoryPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryPublisher publisher = client.getFindingHistoryPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetFindingHistoryResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation.

      Parameters:
      getFindingHistoryRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingHistoryPaginator

      default GetFindingHistoryPublisher getFindingHistoryPaginator(Consumer<GetFindingHistoryRequest.Builder> getFindingHistoryRequest)

      Returns history for a Security Hub finding in the last 90 days. The history includes changes made to any fields in the Amazon Web Services Security Finding Format (ASFF).


      This is a variant of getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryPublisher publisher = client.getFindingHistoryPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingHistoryPublisher publisher = client.getFindingHistoryPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetFindingHistoryResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getFindingHistory(software.amazon.awssdk.services.securityhub.model.GetFindingHistoryRequest) operation.

      This is a convenience which creates an instance of the GetFindingHistoryRequest.Builder avoiding the need to create one manually via GetFindingHistoryRequest.builder()

      Parameters:
      getFindingHistoryRequest - A Consumer that will call methods on GetFindingHistoryRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindings

      default CompletableFuture<GetFindingsResponse> getFindings(GetFindingsRequest getFindingsRequest)

      Returns a list of findings that match the specified criteria.

      If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.

      Parameters:
      getFindingsRequest -
      Returns:
      A Java Future containing the result of the GetFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindings

      default CompletableFuture<GetFindingsResponse> getFindings(Consumer<GetFindingsRequest.Builder> getFindingsRequest)

      Returns a list of findings that match the specified criteria.

      If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.


      This is a convenience which creates an instance of the GetFindingsRequest.Builder avoiding the need to create one manually via GetFindingsRequest.builder()

      Parameters:
      getFindingsRequest - A Consumer that will call methods on GetFindingsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindings

      default CompletableFuture<GetFindingsResponse> getFindings()

      Returns a list of findings that match the specified criteria.

      If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.

      Returns:
      A Java Future containing the result of the GetFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingsPaginator

      default GetFindingsPublisher getFindingsPaginator()

      Returns a list of findings that match the specified criteria.

      If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.


      This is a variant of getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsPublisher publisher = client.getFindingsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsPublisher publisher = client.getFindingsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetFindingsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetFindingsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation.

      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingsPaginator

      default GetFindingsPublisher getFindingsPaginator(GetFindingsRequest getFindingsRequest)

      Returns a list of findings that match the specified criteria.

      If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.


      This is a variant of getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsPublisher publisher = client.getFindingsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsPublisher publisher = client.getFindingsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetFindingsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetFindingsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation.

      Parameters:
      getFindingsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getFindingsPaginator

      default GetFindingsPublisher getFindingsPaginator(Consumer<GetFindingsRequest.Builder> getFindingsRequest)

      Returns a list of findings that match the specified criteria.

      If finding aggregation is enabled, then when you call GetFindings from the aggregation Region, the results include all of the matching findings from both the aggregation Region and the linked Regions.


      This is a variant of getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsPublisher publisher = client.getFindingsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetFindingsPublisher publisher = client.getFindingsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetFindingsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetFindingsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getFindings(software.amazon.awssdk.services.securityhub.model.GetFindingsRequest) operation.

      This is a convenience which creates an instance of the GetFindingsRequest.Builder avoiding the need to create one manually via GetFindingsRequest.builder()

      Parameters:
      getFindingsRequest - A Consumer that will call methods on GetFindingsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInsightResults

      default CompletableFuture<GetInsightResultsResponse> getInsightResults(GetInsightResultsRequest getInsightResultsRequest)

      Lists the results of the Security Hub insight specified by the insight ARN.

      Parameters:
      getInsightResultsRequest -
      Returns:
      A Java Future containing the result of the GetInsightResults operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInsightResults

      default CompletableFuture<GetInsightResultsResponse> getInsightResults(Consumer<GetInsightResultsRequest.Builder> getInsightResultsRequest)

      Lists the results of the Security Hub insight specified by the insight ARN.


      This is a convenience which creates an instance of the GetInsightResultsRequest.Builder avoiding the need to create one manually via GetInsightResultsRequest.builder()

      Parameters:
      getInsightResultsRequest - A Consumer that will call methods on GetInsightResultsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetInsightResults operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInsights

      default CompletableFuture<GetInsightsResponse> getInsights(GetInsightsRequest getInsightsRequest)

      Lists and describes insights for the specified insight ARNs.

      Parameters:
      getInsightsRequest -
      Returns:
      A Java Future containing the result of the GetInsights operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInsights

      default CompletableFuture<GetInsightsResponse> getInsights(Consumer<GetInsightsRequest.Builder> getInsightsRequest)

      Lists and describes insights for the specified insight ARNs.


      This is a convenience which creates an instance of the GetInsightsRequest.Builder avoiding the need to create one manually via GetInsightsRequest.builder()

      Parameters:
      getInsightsRequest - A Consumer that will call methods on GetInsightsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetInsights operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInsightsPaginator

      default GetInsightsPublisher getInsightsPaginator(GetInsightsRequest getInsightsRequest)

      Lists and describes insights for the specified insight ARNs.


      This is a variant of getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsPublisher publisher = client.getInsightsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsPublisher publisher = client.getInsightsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetInsightsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetInsightsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation.

      Parameters:
      getInsightsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInsightsPaginator

      default GetInsightsPublisher getInsightsPaginator(Consumer<GetInsightsRequest.Builder> getInsightsRequest)

      Lists and describes insights for the specified insight ARNs.


      This is a variant of getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsPublisher publisher = client.getInsightsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.GetInsightsPublisher publisher = client.getInsightsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.GetInsightsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.GetInsightsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the getInsights(software.amazon.awssdk.services.securityhub.model.GetInsightsRequest) operation.

      This is a convenience which creates an instance of the GetInsightsRequest.Builder avoiding the need to create one manually via GetInsightsRequest.builder()

      Parameters:
      getInsightsRequest - A Consumer that will call methods on GetInsightsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInvitationsCount

      default CompletableFuture<GetInvitationsCountResponse> getInvitationsCount(GetInvitationsCountRequest getInvitationsCountRequest)

      Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.

      Parameters:
      getInvitationsCountRequest -
      Returns:
      A Java Future containing the result of the GetInvitationsCount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInvitationsCount

      default CompletableFuture<GetInvitationsCountResponse> getInvitationsCount(Consumer<GetInvitationsCountRequest.Builder> getInvitationsCountRequest)

      Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.


      This is a convenience which creates an instance of the GetInvitationsCountRequest.Builder avoiding the need to create one manually via GetInvitationsCountRequest.builder()

      Parameters:
      getInvitationsCountRequest - A Consumer that will call methods on GetInvitationsCountRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetInvitationsCount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getInvitationsCount

      default CompletableFuture<GetInvitationsCountResponse> getInvitationsCount()

      Returns the count of all Security Hub membership invitations that were sent to the current member account, not including the currently accepted invitation.

      Returns:
      A Java Future containing the result of the GetInvitationsCount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getMasterAccount

      @Deprecated default CompletableFuture<GetMasterAccountResponse> getMasterAccount(GetMasterAccountRequest getMasterAccountRequest)
      Deprecated.
      This API has been deprecated, use GetAdministratorAccount API instead.

      This method is deprecated. Instead, use GetAdministratorAccount.

      The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.

      Provides the details for the Security Hub administrator account for the current member account.

      Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.

      Parameters:
      getMasterAccountRequest -
      Returns:
      A Java Future containing the result of the GetMasterAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getMasterAccount

      @Deprecated default CompletableFuture<GetMasterAccountResponse> getMasterAccount(Consumer<GetMasterAccountRequest.Builder> getMasterAccountRequest)
      Deprecated.
      This API has been deprecated, use GetAdministratorAccount API instead.

      This method is deprecated. Instead, use GetAdministratorAccount.

      The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.

      Provides the details for the Security Hub administrator account for the current member account.

      Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.


      This is a convenience which creates an instance of the GetMasterAccountRequest.Builder avoiding the need to create one manually via GetMasterAccountRequest.builder()

      Parameters:
      getMasterAccountRequest - A Consumer that will call methods on GetMasterAccountRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetMasterAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getMasterAccount

      @Deprecated default CompletableFuture<GetMasterAccountResponse> getMasterAccount()
      Deprecated.
      This API has been deprecated, use GetAdministratorAccount API instead.

      This method is deprecated. Instead, use GetAdministratorAccount.

      The Security Hub console continues to use GetMasterAccount. It will eventually change to use GetAdministratorAccount. Any IAM policies that specifically control access to this function must continue to use GetMasterAccount. You should also add GetAdministratorAccount to your policies to ensure that the correct permissions are in place after the console begins to use GetAdministratorAccount.

      Provides the details for the Security Hub administrator account for the current member account.

      Can be used by both member accounts that are managed using Organizations and accounts that were invited manually.

      Returns:
      A Java Future containing the result of the GetMasterAccount operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getMembers

      default CompletableFuture<GetMembersResponse> getMembers(GetMembersRequest getMembersRequest)

      Returns the details for the Security Hub member accounts for the specified account IDs.

      An administrator account can be either the delegated Security Hub administrator account for an organization or an administrator account that enabled Security Hub manually.

      The results include both member accounts that are managed using Organizations and accounts that were invited manually.

      Parameters:
      getMembersRequest -
      Returns:
      A Java Future containing the result of the GetMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • getMembers

      default CompletableFuture<GetMembersResponse> getMembers(Consumer<GetMembersRequest.Builder> getMembersRequest)

      Returns the details for the Security Hub member accounts for the specified account IDs.

      An administrator account can be either the delegated Security Hub administrator account for an organization or an administrator account that enabled Security Hub manually.

      The results include both member accounts that are managed using Organizations and accounts that were invited manually.


      This is a convenience which creates an instance of the GetMembersRequest.Builder avoiding the need to create one manually via GetMembersRequest.builder()

      Parameters:
      getMembersRequest - A Consumer that will call methods on GetMembersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the GetMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • inviteMembers

      default CompletableFuture<InviteMembersResponse> inviteMembers(InviteMembersRequest inviteMembersRequest)

      Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.

      This operation is only used to invite accounts that do not belong to an organization. Organization accounts do not receive invitations.

      Before you can use this action to invite a member, you must first use the CreateMembers action to create the member account in Security Hub.

      When the account owner enables Security Hub and accepts the invitation to become a member account, the administrator account can view the findings generated from the member account.

      Parameters:
      inviteMembersRequest -
      Returns:
      A Java Future containing the result of the InviteMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • inviteMembers

      default CompletableFuture<InviteMembersResponse> inviteMembers(Consumer<InviteMembersRequest.Builder> inviteMembersRequest)

      Invites other Amazon Web Services accounts to become member accounts for the Security Hub administrator account that the invitation is sent from.

      This operation is only used to invite accounts that do not belong to an organization. Organization accounts do not receive invitations.

      Before you can use this action to invite a member, you must first use the CreateMembers action to create the member account in Security Hub.

      When the account owner enables Security Hub and accepts the invitation to become a member account, the administrator account can view the findings generated from the member account.


      This is a convenience which creates an instance of the InviteMembersRequest.Builder avoiding the need to create one manually via InviteMembersRequest.builder()

      Parameters:
      inviteMembersRequest - A Consumer that will call methods on InviteMembersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the InviteMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAutomationRules

      default CompletableFuture<ListAutomationRulesResponse> listAutomationRules(ListAutomationRulesRequest listAutomationRulesRequest)

      A list of automation rules and their metadata for the calling account.

      Parameters:
      listAutomationRulesRequest -
      Returns:
      A Java Future containing the result of the ListAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listAutomationRules

      default CompletableFuture<ListAutomationRulesResponse> listAutomationRules(Consumer<ListAutomationRulesRequest.Builder> listAutomationRulesRequest)

      A list of automation rules and their metadata for the calling account.


      This is a convenience which creates an instance of the ListAutomationRulesRequest.Builder avoiding the need to create one manually via ListAutomationRulesRequest.builder()

      Parameters:
      listAutomationRulesRequest - A Consumer that will call methods on ListAutomationRulesRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListAutomationRules operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InternalException Internal server error.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEnabledProductsForImport

      default CompletableFuture<ListEnabledProductsForImportResponse> listEnabledProductsForImport(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)

      Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.

      Parameters:
      listEnabledProductsForImportRequest -
      Returns:
      A Java Future containing the result of the ListEnabledProductsForImport operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEnabledProductsForImport

      default CompletableFuture<ListEnabledProductsForImportResponse> listEnabledProductsForImport(Consumer<ListEnabledProductsForImportRequest.Builder> listEnabledProductsForImportRequest)

      Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.


      This is a convenience which creates an instance of the ListEnabledProductsForImportRequest.Builder avoiding the need to create one manually via ListEnabledProductsForImportRequest.builder()

      Parameters:
      listEnabledProductsForImportRequest - A Consumer that will call methods on ListEnabledProductsForImportRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListEnabledProductsForImport operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEnabledProductsForImport

      default CompletableFuture<ListEnabledProductsForImportResponse> listEnabledProductsForImport()

      Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.

      Returns:
      A Java Future containing the result of the ListEnabledProductsForImport operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEnabledProductsForImportPaginator

      default ListEnabledProductsForImportPublisher listEnabledProductsForImportPaginator()

      Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.


      This is a variant of listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportPublisher publisher = client.listEnabledProductsForImportPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportPublisher publisher = client.listEnabledProductsForImportPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation.

      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEnabledProductsForImportPaginator

      default ListEnabledProductsForImportPublisher listEnabledProductsForImportPaginator(ListEnabledProductsForImportRequest listEnabledProductsForImportRequest)

      Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.


      This is a variant of listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportPublisher publisher = client.listEnabledProductsForImportPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportPublisher publisher = client.listEnabledProductsForImportPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation.

      Parameters:
      listEnabledProductsForImportRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listEnabledProductsForImportPaginator

      default ListEnabledProductsForImportPublisher listEnabledProductsForImportPaginator(Consumer<ListEnabledProductsForImportRequest.Builder> listEnabledProductsForImportRequest)

      Lists all findings-generating solutions (products) that you are subscribed to receive findings from in Security Hub.


      This is a variant of listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportPublisher publisher = client.listEnabledProductsForImportPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListEnabledProductsForImportPublisher publisher = client.listEnabledProductsForImportPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listEnabledProductsForImport(software.amazon.awssdk.services.securityhub.model.ListEnabledProductsForImportRequest) operation.

      This is a convenience which creates an instance of the ListEnabledProductsForImportRequest.Builder avoiding the need to create one manually via ListEnabledProductsForImportRequest.builder()

      Parameters:
      listEnabledProductsForImportRequest - A Consumer that will call methods on ListEnabledProductsForImportRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listFindingAggregators

      default CompletableFuture<ListFindingAggregatorsResponse> listFindingAggregators(ListFindingAggregatorsRequest listFindingAggregatorsRequest)

      If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.

      Parameters:
      listFindingAggregatorsRequest -
      Returns:
      A Java Future containing the result of the ListFindingAggregators operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listFindingAggregators

      default CompletableFuture<ListFindingAggregatorsResponse> listFindingAggregators(Consumer<ListFindingAggregatorsRequest.Builder> listFindingAggregatorsRequest)

      If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.


      This is a convenience which creates an instance of the ListFindingAggregatorsRequest.Builder avoiding the need to create one manually via ListFindingAggregatorsRequest.builder()

      Parameters:
      listFindingAggregatorsRequest - A Consumer that will call methods on ListFindingAggregatorsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListFindingAggregators operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listFindingAggregatorsPaginator

      default ListFindingAggregatorsPublisher listFindingAggregatorsPaginator(ListFindingAggregatorsRequest listFindingAggregatorsRequest)

      If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.


      This is a variant of listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsPublisher publisher = client.listFindingAggregatorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsPublisher publisher = client.listFindingAggregatorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation.

      Parameters:
      listFindingAggregatorsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listFindingAggregatorsPaginator

      default ListFindingAggregatorsPublisher listFindingAggregatorsPaginator(Consumer<ListFindingAggregatorsRequest.Builder> listFindingAggregatorsRequest)

      If finding aggregation is enabled, then ListFindingAggregators returns the ARN of the finding aggregator. You can run this operation from any Region.


      This is a variant of listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsPublisher publisher = client.listFindingAggregatorsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListFindingAggregatorsPublisher publisher = client.listFindingAggregatorsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listFindingAggregators(software.amazon.awssdk.services.securityhub.model.ListFindingAggregatorsRequest) operation.

      This is a convenience which creates an instance of the ListFindingAggregatorsRequest.Builder avoiding the need to create one manually via ListFindingAggregatorsRequest.builder()

      Parameters:
      listFindingAggregatorsRequest - A Consumer that will call methods on ListFindingAggregatorsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInvitations

      default CompletableFuture<ListInvitationsResponse> listInvitations(ListInvitationsRequest listInvitationsRequest)

      Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.

      This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.

      Parameters:
      listInvitationsRequest -
      Returns:
      A Java Future containing the result of the ListInvitations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInvitations

      default CompletableFuture<ListInvitationsResponse> listInvitations(Consumer<ListInvitationsRequest.Builder> listInvitationsRequest)

      Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.

      This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.


      This is a convenience which creates an instance of the ListInvitationsRequest.Builder avoiding the need to create one manually via ListInvitationsRequest.builder()

      Parameters:
      listInvitationsRequest - A Consumer that will call methods on ListInvitationsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListInvitations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInvitations

      default CompletableFuture<ListInvitationsResponse> listInvitations()

      Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.

      This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.

      Returns:
      A Java Future containing the result of the ListInvitations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInvitationsPaginator

      default ListInvitationsPublisher listInvitationsPaginator()

      Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.

      This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.


      This is a variant of listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsPublisher publisher = client.listInvitationsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsPublisher publisher = client.listInvitationsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation.

      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInvitationsPaginator

      default ListInvitationsPublisher listInvitationsPaginator(ListInvitationsRequest listInvitationsRequest)

      Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.

      This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.


      This is a variant of listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsPublisher publisher = client.listInvitationsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsPublisher publisher = client.listInvitationsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation.

      Parameters:
      listInvitationsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listInvitationsPaginator

      default ListInvitationsPublisher listInvitationsPaginator(Consumer<ListInvitationsRequest.Builder> listInvitationsRequest)

      Lists all Security Hub membership invitations that were sent to the current Amazon Web Services account.

      This operation is only used by accounts that are managed by invitation. Accounts that are managed using the integration with Organizations do not receive invitations.


      This is a variant of listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsPublisher publisher = client.listInvitationsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListInvitationsPublisher publisher = client.listInvitationsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListInvitationsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listInvitations(software.amazon.awssdk.services.securityhub.model.ListInvitationsRequest) operation.

      This is a convenience which creates an instance of the ListInvitationsRequest.Builder avoiding the need to create one manually via ListInvitationsRequest.builder()

      Parameters:
      listInvitationsRequest - A Consumer that will call methods on ListInvitationsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMembers

      default CompletableFuture<ListMembersResponse> listMembers(ListMembersRequest listMembersRequest)

      Lists details about all member accounts for the current Security Hub administrator account.

      The results include both member accounts that belong to an organization and member accounts that were invited manually.

      Parameters:
      listMembersRequest -
      Returns:
      A Java Future containing the result of the ListMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMembers

      default CompletableFuture<ListMembersResponse> listMembers(Consumer<ListMembersRequest.Builder> listMembersRequest)

      Lists details about all member accounts for the current Security Hub administrator account.

      The results include both member accounts that belong to an organization and member accounts that were invited manually.


      This is a convenience which creates an instance of the ListMembersRequest.Builder avoiding the need to create one manually via ListMembersRequest.builder()

      Parameters:
      listMembersRequest - A Consumer that will call methods on ListMembersRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMembers

      default CompletableFuture<ListMembersResponse> listMembers()

      Lists details about all member accounts for the current Security Hub administrator account.

      The results include both member accounts that belong to an organization and member accounts that were invited manually.

      Returns:
      A Java Future containing the result of the ListMembers operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMembersPaginator

      default ListMembersPublisher listMembersPaginator()

      Lists details about all member accounts for the current Security Hub administrator account.

      The results include both member accounts that belong to an organization and member accounts that were invited manually.


      This is a variant of listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListMembersPublisher publisher = client.listMembersPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListMembersPublisher publisher = client.listMembersPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListMembersResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListMembersResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation.

      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMembersPaginator

      default ListMembersPublisher listMembersPaginator(ListMembersRequest listMembersRequest)

      Lists details about all member accounts for the current Security Hub administrator account.

      The results include both member accounts that belong to an organization and member accounts that were invited manually.


      This is a variant of listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListMembersPublisher publisher = client.listMembersPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListMembersPublisher publisher = client.listMembersPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListMembersResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListMembersResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation.

      Parameters:
      listMembersRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listMembersPaginator

      default ListMembersPublisher listMembersPaginator(Consumer<ListMembersRequest.Builder> listMembersRequest)

      Lists details about all member accounts for the current Security Hub administrator account.

      The results include both member accounts that belong to an organization and member accounts that were invited manually.


      This is a variant of listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListMembersPublisher publisher = client.listMembersPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListMembersPublisher publisher = client.listMembersPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListMembersResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListMembersResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listMembers(software.amazon.awssdk.services.securityhub.model.ListMembersRequest) operation.

      This is a convenience which creates an instance of the ListMembersRequest.Builder avoiding the need to create one manually via ListMembersRequest.builder()

      Parameters:
      listMembersRequest - A Consumer that will call methods on ListMembersRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listOrganizationAdminAccounts

      default CompletableFuture<ListOrganizationAdminAccountsResponse> listOrganizationAdminAccounts(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)

      Lists the Security Hub administrator accounts. Can only be called by the organization management account.

      Parameters:
      listOrganizationAdminAccountsRequest -
      Returns:
      A Java Future containing the result of the ListOrganizationAdminAccounts operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listOrganizationAdminAccounts

      default CompletableFuture<ListOrganizationAdminAccountsResponse> listOrganizationAdminAccounts(Consumer<ListOrganizationAdminAccountsRequest.Builder> listOrganizationAdminAccountsRequest)

      Lists the Security Hub administrator accounts. Can only be called by the organization management account.


      This is a convenience which creates an instance of the ListOrganizationAdminAccountsRequest.Builder avoiding the need to create one manually via ListOrganizationAdminAccountsRequest.builder()

      Parameters:
      listOrganizationAdminAccountsRequest - A Consumer that will call methods on ListOrganizationAdminAccountsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListOrganizationAdminAccounts operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listOrganizationAdminAccountsPaginator

      default ListOrganizationAdminAccountsPublisher listOrganizationAdminAccountsPaginator(ListOrganizationAdminAccountsRequest listOrganizationAdminAccountsRequest)

      Lists the Security Hub administrator accounts. Can only be called by the organization management account.


      This is a variant of listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsPublisher publisher = client.listOrganizationAdminAccountsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsPublisher publisher = client.listOrganizationAdminAccountsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation.

      Parameters:
      listOrganizationAdminAccountsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listOrganizationAdminAccountsPaginator

      default ListOrganizationAdminAccountsPublisher listOrganizationAdminAccountsPaginator(Consumer<ListOrganizationAdminAccountsRequest.Builder> listOrganizationAdminAccountsRequest)

      Lists the Security Hub administrator accounts. Can only be called by the organization management account.


      This is a variant of listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsPublisher publisher = client.listOrganizationAdminAccountsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListOrganizationAdminAccountsPublisher publisher = client.listOrganizationAdminAccountsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listOrganizationAdminAccounts(software.amazon.awssdk.services.securityhub.model.ListOrganizationAdminAccountsRequest) operation.

      This is a convenience which creates an instance of the ListOrganizationAdminAccountsRequest.Builder avoiding the need to create one manually via ListOrganizationAdminAccountsRequest.builder()

      Parameters:
      listOrganizationAdminAccountsRequest - A Consumer that will call methods on ListOrganizationAdminAccountsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listSecurityControlDefinitions

      default CompletableFuture<ListSecurityControlDefinitionsResponse> listSecurityControlDefinitions(ListSecurityControlDefinitionsRequest listSecurityControlDefinitionsRequest)

      Lists all of the security controls that apply to a specified standard.

      Parameters:
      listSecurityControlDefinitionsRequest -
      Returns:
      A Java Future containing the result of the ListSecurityControlDefinitions operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listSecurityControlDefinitions

      default CompletableFuture<ListSecurityControlDefinitionsResponse> listSecurityControlDefinitions(Consumer<ListSecurityControlDefinitionsRequest.Builder> listSecurityControlDefinitionsRequest)

      Lists all of the security controls that apply to a specified standard.


      This is a convenience which creates an instance of the ListSecurityControlDefinitionsRequest.Builder avoiding the need to create one manually via ListSecurityControlDefinitionsRequest.builder()

      Parameters:
      listSecurityControlDefinitionsRequest - A Consumer that will call methods on ListSecurityControlDefinitionsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListSecurityControlDefinitions operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listSecurityControlDefinitionsPaginator

      default ListSecurityControlDefinitionsPublisher listSecurityControlDefinitionsPaginator(ListSecurityControlDefinitionsRequest listSecurityControlDefinitionsRequest)

      Lists all of the security controls that apply to a specified standard.


      This is a variant of listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsPublisher publisher = client.listSecurityControlDefinitionsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsPublisher publisher = client.listSecurityControlDefinitionsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation.

      Parameters:
      listSecurityControlDefinitionsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listSecurityControlDefinitionsPaginator

      default ListSecurityControlDefinitionsPublisher listSecurityControlDefinitionsPaginator(Consumer<ListSecurityControlDefinitionsRequest.Builder> listSecurityControlDefinitionsRequest)

      Lists all of the security controls that apply to a specified standard.


      This is a variant of listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsPublisher publisher = client.listSecurityControlDefinitionsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListSecurityControlDefinitionsPublisher publisher = client.listSecurityControlDefinitionsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listSecurityControlDefinitions(software.amazon.awssdk.services.securityhub.model.ListSecurityControlDefinitionsRequest) operation.

      This is a convenience which creates an instance of the ListSecurityControlDefinitionsRequest.Builder avoiding the need to create one manually via ListSecurityControlDefinitionsRequest.builder()

      Parameters:
      listSecurityControlDefinitionsRequest - A Consumer that will call methods on ListSecurityControlDefinitionsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listStandardsControlAssociations

      default CompletableFuture<ListStandardsControlAssociationsResponse> listStandardsControlAssociations(ListStandardsControlAssociationsRequest listStandardsControlAssociationsRequest)

      Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.

      Parameters:
      listStandardsControlAssociationsRequest -
      Returns:
      A Java Future containing the result of the ListStandardsControlAssociations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listStandardsControlAssociations

      default CompletableFuture<ListStandardsControlAssociationsResponse> listStandardsControlAssociations(Consumer<ListStandardsControlAssociationsRequest.Builder> listStandardsControlAssociationsRequest)

      Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.


      This is a convenience which creates an instance of the ListStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via ListStandardsControlAssociationsRequest.builder()

      Parameters:
      listStandardsControlAssociationsRequest - A Consumer that will call methods on ListStandardsControlAssociationsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListStandardsControlAssociations operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listStandardsControlAssociationsPaginator

      default ListStandardsControlAssociationsPublisher listStandardsControlAssociationsPaginator(ListStandardsControlAssociationsRequest listStandardsControlAssociationsRequest)

      Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.


      This is a variant of listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsPublisher publisher = client.listStandardsControlAssociationsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsPublisher publisher = client.listStandardsControlAssociationsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation.

      Parameters:
      listStandardsControlAssociationsRequest -
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listStandardsControlAssociationsPaginator

      default ListStandardsControlAssociationsPublisher listStandardsControlAssociationsPaginator(Consumer<ListStandardsControlAssociationsRequest.Builder> listStandardsControlAssociationsRequest)

      Specifies whether a control is currently enabled or disabled in each enabled standard in the calling account.


      This is a variant of listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation. The return type is a custom publisher that can be subscribed to request a stream of response pages. SDK will internally handle making service calls for you.

      When the operation is called, an instance of this class is returned. At this point, no service calls are made yet and so there is no guarantee that the request is valid. If there are errors in your request, you will see the failures only after you start streaming the data. The subscribe method should be called as a request to start streaming data. For more info, see Publisher.subscribe(org.reactivestreams.Subscriber). Each call to the subscribe method will result in a new Subscription i.e., a new contract to stream data from the starting request.

      The following are few ways to use the response class:

      1) Using the subscribe helper method 
       
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsPublisher publisher = client.listStandardsControlAssociationsPaginator(request);
 CompletableFuture<Void> future = publisher.subscribe(res -> { // Do something with the response });
 future.get();
      2) Using a custom subscriber 
       
 software.amazon.awssdk.services.securityhub.paginators.ListStandardsControlAssociationsPublisher publisher = client.listStandardsControlAssociationsPaginator(request);
 publisher.subscribe(new Subscriber<software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsResponse>() {
 
 public void onSubscribe(org.reactivestreams.Subscriber subscription) { //... };
 
 
 public void onNext(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsResponse response) { //... };
 });
      As the response is a publisher, it can work well with third party reactive streams implementations like RxJava2.

      Please notice that the configuration of MaxResults won't limit the number of results you get with the paginator. It only limits the number of results in each page.

      Note: If you prefer to have control on service calls, use the listStandardsControlAssociations(software.amazon.awssdk.services.securityhub.model.ListStandardsControlAssociationsRequest) operation.

      This is a convenience which creates an instance of the ListStandardsControlAssociationsRequest.Builder avoiding the need to create one manually via ListStandardsControlAssociationsRequest.builder()

      Parameters:
      listStandardsControlAssociationsRequest - A Consumer that will call methods on ListStandardsControlAssociationsRequest.Builder to create a request.
      Returns:
      A custom publisher that can be subscribed to request a stream of response pages.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(ListTagsForResourceRequest listTagsForResourceRequest)

      Returns a list of tags associated with a resource.

      Parameters:
      listTagsForResourceRequest -
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • listTagsForResource

      default CompletableFuture<ListTagsForResourceResponse> listTagsForResource(Consumer<ListTagsForResourceRequest.Builder> listTagsForResourceRequest)

      Returns a list of tags associated with a resource.


      This is a convenience which creates an instance of the ListTagsForResourceRequest.Builder avoiding the need to create one manually via ListTagsForResourceRequest.builder()

      Parameters:
      listTagsForResourceRequest - A Consumer that will call methods on ListTagsForResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the ListTagsForResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(TagResourceRequest tagResourceRequest)

      Adds one or more tags to a resource.

      Parameters:
      tagResourceRequest -
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • tagResource

      default CompletableFuture<TagResourceResponse> tagResource(Consumer<TagResourceRequest.Builder> tagResourceRequest)

      Adds one or more tags to a resource.


      This is a convenience which creates an instance of the TagResourceRequest.Builder avoiding the need to create one manually via TagResourceRequest.builder()

      Parameters:
      tagResourceRequest - A Consumer that will call methods on TagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the TagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(UntagResourceRequest untagResourceRequest)

      Removes one or more tags from a resource.

      Parameters:
      untagResourceRequest -
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • untagResource

      default CompletableFuture<UntagResourceResponse> untagResource(Consumer<UntagResourceRequest.Builder> untagResourceRequest)

      Removes one or more tags from a resource.


      This is a convenience which creates an instance of the UntagResourceRequest.Builder avoiding the need to create one manually via UntagResourceRequest.builder()

      Parameters:
      untagResourceRequest - A Consumer that will call methods on UntagResourceRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UntagResource operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateActionTarget

      default CompletableFuture<UpdateActionTargetResponse> updateActionTarget(UpdateActionTargetRequest updateActionTargetRequest)

      Updates the name and description of a custom action target in Security Hub.

      Parameters:
      updateActionTargetRequest -
      Returns:
      A Java Future containing the result of the UpdateActionTarget operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateActionTarget

      default CompletableFuture<UpdateActionTargetResponse> updateActionTarget(Consumer<UpdateActionTargetRequest.Builder> updateActionTargetRequest)

      Updates the name and description of a custom action target in Security Hub.


      This is a convenience which creates an instance of the UpdateActionTargetRequest.Builder avoiding the need to create one manually via UpdateActionTargetRequest.builder()

      Parameters:
      updateActionTargetRequest - A Consumer that will call methods on UpdateActionTargetRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateActionTarget operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateFindingAggregator

      default CompletableFuture<UpdateFindingAggregatorResponse> updateFindingAggregator(UpdateFindingAggregatorRequest updateFindingAggregatorRequest)

      Updates the finding aggregation configuration. Used to update the Region linking mode and the list of included or excluded Regions. You cannot use UpdateFindingAggregator to change the aggregation Region.

      You must run UpdateFindingAggregator from the current aggregation Region.

      Parameters:
      updateFindingAggregatorRequest -
      Returns:
      A Java Future containing the result of the UpdateFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateFindingAggregator

      default CompletableFuture<UpdateFindingAggregatorResponse> updateFindingAggregator(Consumer<UpdateFindingAggregatorRequest.Builder> updateFindingAggregatorRequest)

      Updates the finding aggregation configuration. Used to update the Region linking mode and the list of included or excluded Regions. You cannot use UpdateFindingAggregator to change the aggregation Region.

      You must run UpdateFindingAggregator from the current aggregation Region.


      This is a convenience which creates an instance of the UpdateFindingAggregatorRequest.Builder avoiding the need to create one manually via UpdateFindingAggregatorRequest.builder()

      Parameters:
      updateFindingAggregatorRequest - A Consumer that will call methods on UpdateFindingAggregatorRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateFindingAggregator operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • AccessDeniedException You don't have permission to perform the action specified in the request.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateFindings

      default CompletableFuture<UpdateFindingsResponse> updateFindings(UpdateFindingsRequest updateFindingsRequest)

      UpdateFindings is deprecated. Instead of UpdateFindings, use BatchUpdateFindings.

      Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.

      Parameters:
      updateFindingsRequest -
      Returns:
      A Java Future containing the result of the UpdateFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateFindings

      default CompletableFuture<UpdateFindingsResponse> updateFindings(Consumer<UpdateFindingsRequest.Builder> updateFindingsRequest)

      UpdateFindings is deprecated. Instead of UpdateFindings, use BatchUpdateFindings.

      Updates the Note and RecordState of the Security Hub-aggregated findings that the filter attributes specify. Any member account that can view the finding also sees the update to the finding.


      This is a convenience which creates an instance of the UpdateFindingsRequest.Builder avoiding the need to create one manually via UpdateFindingsRequest.builder()

      Parameters:
      updateFindingsRequest - A Consumer that will call methods on UpdateFindingsRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateFindings operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateInsight

      default CompletableFuture<UpdateInsightResponse> updateInsight(UpdateInsightRequest updateInsightRequest)

      Updates the Security Hub insight identified by the specified insight ARN.

      Parameters:
      updateInsightRequest -
      Returns:
      A Java Future containing the result of the UpdateInsight operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateInsight

      default CompletableFuture<UpdateInsightResponse> updateInsight(Consumer<UpdateInsightRequest.Builder> updateInsightRequest)

      Updates the Security Hub insight identified by the specified insight ARN.


      This is a convenience which creates an instance of the UpdateInsightRequest.Builder avoiding the need to create one manually via UpdateInsightRequest.builder()

      Parameters:
      updateInsightRequest - A Consumer that will call methods on UpdateInsightRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateInsight operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateOrganizationConfiguration

      default CompletableFuture<UpdateOrganizationConfigurationResponse> updateOrganizationConfiguration(UpdateOrganizationConfigurationRequest updateOrganizationConfigurationRequest)

      Used to update the configuration related to Organizations. Can only be called from a Security Hub administrator account.

      Parameters:
      updateOrganizationConfigurationRequest -
      Returns:
      A Java Future containing the result of the UpdateOrganizationConfiguration operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateOrganizationConfiguration

      default CompletableFuture<UpdateOrganizationConfigurationResponse> updateOrganizationConfiguration(Consumer<UpdateOrganizationConfigurationRequest.Builder> updateOrganizationConfigurationRequest)

      Used to update the configuration related to Organizations. Can only be called from a Security Hub administrator account.


      This is a convenience which creates an instance of the UpdateOrganizationConfigurationRequest.Builder avoiding the need to create one manually via UpdateOrganizationConfigurationRequest.builder()

      Parameters:
      updateOrganizationConfigurationRequest - A Consumer that will call methods on UpdateOrganizationConfigurationRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateOrganizationConfiguration operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateSecurityHubConfiguration

      default CompletableFuture<UpdateSecurityHubConfigurationResponse> updateSecurityHubConfiguration(UpdateSecurityHubConfigurationRequest updateSecurityHubConfigurationRequest)

      Updates configuration options for Security Hub.

      Parameters:
      updateSecurityHubConfigurationRequest -
      Returns:
      A Java Future containing the result of the UpdateSecurityHubConfiguration operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateSecurityHubConfiguration

      default CompletableFuture<UpdateSecurityHubConfigurationResponse> updateSecurityHubConfiguration(Consumer<UpdateSecurityHubConfigurationRequest.Builder> updateSecurityHubConfigurationRequest)

      Updates configuration options for Security Hub.


      This is a convenience which creates an instance of the UpdateSecurityHubConfigurationRequest.Builder avoiding the need to create one manually via UpdateSecurityHubConfigurationRequest.builder()

      Parameters:
      updateSecurityHubConfigurationRequest - A Consumer that will call methods on UpdateSecurityHubConfigurationRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateSecurityHubConfiguration operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • LimitExceededException The request was rejected because it attempted to create resources beyond the current Amazon Web Services account or throttling limits. The error code describes the limit exceeded.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateStandardsControl

      default CompletableFuture<UpdateStandardsControlResponse> updateStandardsControl(UpdateStandardsControlRequest updateStandardsControlRequest)

      Used to control whether an individual security standard control is enabled or disabled.

      Parameters:
      updateStandardsControlRequest -
      Returns:
      A Java Future containing the result of the UpdateStandardsControl operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • updateStandardsControl

      default CompletableFuture<UpdateStandardsControlResponse> updateStandardsControl(Consumer<UpdateStandardsControlRequest.Builder> updateStandardsControlRequest)

      Used to control whether an individual security standard control is enabled or disabled.


      This is a convenience which creates an instance of the UpdateStandardsControlRequest.Builder avoiding the need to create one manually via UpdateStandardsControlRequest.builder()

      Parameters:
      updateStandardsControlRequest - A Consumer that will call methods on UpdateStandardsControlRequest.Builder to create a request.
      Returns:
      A Java Future containing the result of the UpdateStandardsControl operation returned by the service.
      The CompletableFuture returned by this method can be completed exceptionally with the following exceptions.
      • InternalException Internal server error.
      • InvalidInputException The request was rejected because you supplied an invalid or out-of-range value for an input parameter.
      • InvalidAccessException The account doesn't have permission to perform this action.
      • ResourceNotFoundException The request was rejected because we can't find the specified resource.
      • SdkException Base class for all exceptions that can be thrown by the SDK (both service and client). Can be used for catch all scenarios.
      • SdkClientException If any client side error occurs such as an IO related failure, failure to get credentials, etc.
      • SecurityHubException Base class for all service exceptions. Unknown exceptions will be thrown as an instance of this type.
      See Also:

    • serviceClientConfiguration

      default SecurityHubServiceClientConfiguration serviceClientConfiguration()
      Description copied from interface: SdkClient
      The SDK service client configuration exposes client settings to the user, e.g., ClientOverrideConfiguration
      Specified by:
      serviceClientConfiguration in interface AwsClient
      Specified by:
      serviceClientConfiguration in interface SdkClient
      Returns:
      SdkServiceClientConfiguration

    • create

      static SecurityHubAsyncClient create()
      Create a SecurityHubAsyncClient with the region loaded from the DefaultAwsRegionProviderChain and credentials loaded from the DefaultCredentialsProvider.

    • builder

      static SecurityHubAsyncClientBuilder builder()
      Create a builder that can be used to configure and create a SecurityHubAsyncClient.