software.amazon.awssdk.services.servicediscovery.model

Class HealthCheckConfig

java.lang.Object

software.amazon.awssdk.services.servicediscovery.model.HealthCheckConfig

All Implemented Interfaces:

Serializable, SdkPojo, ToCopyableBuilder<HealthCheckConfig.Builder,HealthCheckConfig>

@Generated(value="software.amazon.awssdk:codegen")
public final class HealthCheckConfig
extends Object
implements SdkPojo, Serializable, ToCopyableBuilder<HealthCheckConfig.Builder,HealthCheckConfig>

Public DNS namespaces only. A complex type that contains settings for an optional health check. If you specify settings for a health check, AWS Cloud Map associates the health check with the records that you specify in DnsConfig.

If you specify a health check configuration, you can specify either HealthCheckCustomConfig or HealthCheckConfig but not both.

Health checks are basic Route 53 health checks that monitor an AWS endpoint. For information about pricing for health checks, see Amazon Route 53 Pricing.

Note the following about configuring health checks.

A and AAAA records

If DnsConfig includes configurations for both A and AAAA records, AWS Cloud Map creates a health check that uses the IPv4 address to check the health of the resource. If the endpoint that is specified by the IPv4 address is unhealthy, Route 53 considers both the A and AAAA records to be unhealthy.

CNAME records

You can't specify settings for HealthCheckConfig when the DNSConfig includes CNAME for the value of Type. If you do, the CreateService request will fail with an InvalidInput error.

Request interval

A Route 53 health checker in each health-checking region sends a health check request to an endpoint every 30 seconds. On average, your endpoint receives a health check request about every two seconds. However, health checkers don't coordinate with one another, so you'll sometimes see several requests per second followed by a few seconds with no health checks at all.

Health checking regions

Health checkers perform checks from all Route 53 health-checking regions. For a list of the current regions, see Regions.

Alias records

When you register an instance, if you include the AWS_ALIAS_DNS_NAME attribute, AWS Cloud Map creates a Route 53 alias record. Note the following:

• Route 53 automatically sets EvaluateTargetHealth to true for alias records. When EvaluateTargetHealth is true, the alias record inherits the health of the referenced AWS resource. such as an ELB load balancer. For more information, see EvaluateTargetHealth.

• If you include HealthCheckConfig and then use the service to register an instance that creates an alias record, Route 53 doesn't create the health check.

Charges for health checks

Health checks are basic Route 53 health checks that monitor an AWS endpoint. For information about pricing for health checks, see Amazon Route 53 Pricing.

See Also:

Serialized Form

Nested Class Summary

Nested Classes

Modifier and Type	Class and Description
static interface	HealthCheckConfig.Builder

Method Summary

Modifier and Type	Method and Description
static HealthCheckConfig.Builder	builder()
boolean	equals(Object obj)
Integer	failureThreshold() The number of consecutive health checks that an endpoint must pass or fail for Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa.
<T> Optional<T>	getValueForField(String fieldName, Class<T> clazz)
int	hashCode()
String	resourcePath() The path that you want Route 53 to request when performing health checks.
List<SdkField<?>>	sdkFields()
static Class<? extends HealthCheckConfig.Builder>	serializableBuilderClass()
HealthCheckConfig.Builder	toBuilder() Take this object and create a builder that contains all of the current property values of this object.
String	toString()
HealthCheckType	type() The type of health check that you want to create, which indicates how Route 53 determines whether an endpoint is healthy.
String	typeAsString() The type of health check that you want to create, which indicates how Route 53 determines whether an endpoint is healthy.

Methods inherited from class java.lang.Object

getClass, notify, notifyAll, wait, wait, wait

Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder

copy

Method Detail

type

public HealthCheckType type()

The type of health check that you want to create, which indicates how Route 53 determines whether an endpoint is healthy.

You can't change the value of Type after you create a health check.

You can create the following types of health checks:

• HTTP: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.

• HTTPS: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.

  If you specify HTTPS for the value of Type, the endpoint must support TLS v1.0 or later.

• TCP: Route 53 tries to establish a TCP connection.

  If you specify TCP for Type, don't specify a value for ResourcePath.

For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.

If the service returns an enum value that is not available in the current SDK version, type will return HealthCheckType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from typeAsString().

Returns:

The type of health check that you want to create, which indicates how Route 53 determines whether an endpoint is healthy.

You can't change the value of Type after you create a health check.

You can create the following types of health checks:

• HTTP: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.

• HTTPS: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.

  If you specify HTTPS for the value of Type, the endpoint must support TLS v1.0 or later.

• TCP: Route 53 tries to establish a TCP connection.

  If you specify TCP for Type, don't specify a value for ResourcePath.

For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.

See Also:

HealthCheckType

typeAsString

public String typeAsString()

The type of health check that you want to create, which indicates how Route 53 determines whether an endpoint is healthy.

You can't change the value of Type after you create a health check.

You can create the following types of health checks:

• HTTP: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.

• HTTPS: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.

  If you specify HTTPS for the value of Type, the endpoint must support TLS v1.0 or later.

• TCP: Route 53 tries to establish a TCP connection.

  If you specify TCP for Type, don't specify a value for ResourcePath.

For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.

If the service returns an enum value that is not available in the current SDK version, type will return HealthCheckType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from typeAsString().

Returns:

The type of health check that you want to create, which indicates how Route 53 determines whether an endpoint is healthy.

You can't change the value of Type after you create a health check.

You can create the following types of health checks:

• HTTP: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.

• HTTPS: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.

  If you specify HTTPS for the value of Type, the endpoint must support TLS v1.0 or later.

• TCP: Route 53 tries to establish a TCP connection.

  If you specify TCP for Type, don't specify a value for ResourcePath.

For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.

See Also:

HealthCheckType

resourcePath

public String resourcePath()

The path that you want Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, such as the file /docs/route53-health-check.html. Route 53 automatically adds the DNS name for the service. If you don't specify a value for ResourcePath, the default value is /.

If you specify TCP for Type, you must not specify a value for ResourcePath.

Returns:

The path that you want Route 53 to request when performing health checks. The path can be any value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, such as the file /docs/route53-health-check.html. Route 53 automatically adds the DNS name for the service. If you don't specify a value for ResourcePath, the default value is / .

If you specify TCP for Type, you must not specify a value for ResourcePath.

failureThreshold

public Integer failureThreshold()

The number of consecutive health checks that an endpoint must pass or fail for Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.

Returns:

The number of consecutive health checks that an endpoint must pass or fail for Route 53 to change the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.

toBuilder

public HealthCheckConfig.Builder toBuilder()

Description copied from interface: ToCopyableBuilder

Take this object and create a builder that contains all of the current property values of this object.

Specified by:

toBuilder in interface ToCopyableBuilder<HealthCheckConfig.Builder,HealthCheckConfig>

Returns:

a builder for type T

builder

public static HealthCheckConfig.Builder builder()

serializableBuilderClass

public static Class<? extends HealthCheckConfig.Builder> serializableBuilderClass()

hashCode

public int hashCode()

Overrides:

hashCode in class Object

equals

public boolean equals(Object obj)

Overrides:

equals in class Object

toString

public String toString()

Overrides:

toString in class Object

getValueForField

public <T> Optional<T> getValueForField(String fieldName,
                                        Class<T> clazz)

sdkFields

public List<SdkField<?>> sdkFields()

Specified by:

sdkFields in interface SdkPojo

Returns:

List of SdkField in this POJO. May be empty list but should never be null.