software.amazon.awssdk.services.directconnect.model

Class CreateConnectionResponse

java.lang.Object

software.amazon.awssdk.core.SdkResponse

software.amazon.awssdk.awscore.AwsResponse

software.amazon.awssdk.services.directconnect.model.DirectConnectResponse

software.amazon.awssdk.services.directconnect.model.CreateConnectionResponse

All Implemented Interfaces:

SdkPojo, ToCopyableBuilder<CreateConnectionResponse.Builder,CreateConnectionResponse>

@Generated(value="software.amazon.awssdk:codegen")
public final class CreateConnectionResponse
extends DirectConnectResponse
implements ToCopyableBuilder<CreateConnectionResponse.Builder,CreateConnectionResponse>

Information about an AWS Direct Connect connection.

Nested Class Summary

Nested Classes

Modifier and Type	Class and Description
static interface	CreateConnectionResponse.Builder

Method Summary

Modifier and Type	Method and Description
String	awsDevice() The Direct Connect endpoint on which the physical connection terminates.
String	awsDeviceV2() The Direct Connect endpoint on which the physical connection terminates.
String	bandwidth() The bandwidth of the connection.
static CreateConnectionResponse.Builder	builder()
String	connectionId() The ID of the connection.
String	connectionName() The name of the connection.
ConnectionState	connectionState() The state of the connection.
String	connectionStateAsString() The state of the connection.
boolean	equals(Object obj)
<T> Optional<T>	getValueForField(String fieldName, Class<T> clazz) Used to retrieve the value of a field from any class that extends SdkResponse.
int	hashCode()
HasLogicalRedundancy	hasLogicalRedundancy() Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
String	hasLogicalRedundancyAsString() Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
Boolean	jumboFrameCapable() Indicates whether jumbo frames (9001 MTU) are supported.
String	lagId() The ID of the LAG.
Instant	loaIssueTime() The time of the most recent call to DescribeLoa for this connection.
String	location() The location of the connection.
String	ownerAccount() The ID of the AWS account that owns the connection.
String	partnerName() The name of the AWS Direct Connect service provider associated with the connection.
String	region() The AWS Region where the connection is located.
List<SdkField<?>>	sdkFields()
static Class<? extends CreateConnectionResponse.Builder>	serializableBuilderClass()
CreateConnectionResponse.Builder	toBuilder() Take this object and create a builder that contains all of the current property values of this object.
String	toString()
Integer	vlan() The ID of the VLAN.

Methods inherited from class software.amazon.awssdk.services.directconnect.model.DirectConnectResponse

responseMetadata

Methods inherited from class software.amazon.awssdk.core.SdkResponse

sdkHttpResponse

Methods inherited from class java.lang.Object

getClass, notify, notifyAll, wait, wait, wait

Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder

copy

Method Detail

ownerAccount

public String ownerAccount()

The ID of the AWS account that owns the connection.

Returns:

The ID of the AWS account that owns the connection.

connectionId

public String connectionId()

The ID of the connection.

Returns:

The ID of the connection.

connectionName

public String connectionName()

The name of the connection.

Returns:

The name of the connection.

connectionState

public ConnectionState connectionState()

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

If the service returns an enum value that is not available in the current SDK version, connectionState will return ConnectionState.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from connectionStateAsString().

Returns:

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

See Also:

ConnectionState

connectionStateAsString

public String connectionStateAsString()

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

If the service returns an enum value that is not available in the current SDK version, connectionState will return ConnectionState.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from connectionStateAsString().

Returns:

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

See Also:

ConnectionState

region

public String region()

The AWS Region where the connection is located.

Returns:

The AWS Region where the connection is located.

location

public String location()

The location of the connection.

Returns:

The location of the connection.

bandwidth

public String bandwidth()

The bandwidth of the connection.

Returns:

The bandwidth of the connection.

vlan

public Integer vlan()

The ID of the VLAN.

Returns:

The ID of the VLAN.

partnerName

public String partnerName()

The name of the AWS Direct Connect service provider associated with the connection.

Returns:

The name of the AWS Direct Connect service provider associated with the connection.

loaIssueTime

public Instant loaIssueTime()

The time of the most recent call to DescribeLoa for this connection.

Returns:

The time of the most recent call to DescribeLoa for this connection.

lagId

public String lagId()

The ID of the LAG.

Returns:

The ID of the LAG.

awsDevice

public String awsDevice()

The Direct Connect endpoint on which the physical connection terminates.

Returns:

The Direct Connect endpoint on which the physical connection terminates.

jumboFrameCapable

public Boolean jumboFrameCapable()

Indicates whether jumbo frames (9001 MTU) are supported.

Returns:

Indicates whether jumbo frames (9001 MTU) are supported.

awsDeviceV2

public String awsDeviceV2()

The Direct Connect endpoint on which the physical connection terminates.

Returns:

The Direct Connect endpoint on which the physical connection terminates.

hasLogicalRedundancy

public HasLogicalRedundancy hasLogicalRedundancy()

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

If the service returns an enum value that is not available in the current SDK version, hasLogicalRedundancy will return HasLogicalRedundancy.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from hasLogicalRedundancyAsString().

Returns:

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

See Also:

HasLogicalRedundancy

hasLogicalRedundancyAsString

public String hasLogicalRedundancyAsString()

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

If the service returns an enum value that is not available in the current SDK version, hasLogicalRedundancy will return HasLogicalRedundancy.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from hasLogicalRedundancyAsString().

Returns:

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

See Also:

HasLogicalRedundancy

toBuilder

public CreateConnectionResponse.Builder toBuilder()

Description copied from interface: ToCopyableBuilder

Take this object and create a builder that contains all of the current property values of this object.

Specified by:

toBuilder in interface ToCopyableBuilder<CreateConnectionResponse.Builder,CreateConnectionResponse>

Specified by:

toBuilder in class AwsResponse

Returns:

a builder for type T

builder

public static CreateConnectionResponse.Builder builder()

serializableBuilderClass

public static Class<? extends CreateConnectionResponse.Builder> serializableBuilderClass()

hashCode

public int hashCode()

Overrides:

hashCode in class Object

equals

public boolean equals(Object obj)

Overrides:

equals in class Object

toString

public String toString()

Overrides:

toString in class Object

getValueForField

public <T> Optional<T> getValueForField(String fieldName,
                                        Class<T> clazz)

Description copied from class: SdkResponse

Used to retrieve the value of a field from any class that extends SdkResponse. The field name specified should match the member name from the corresponding service-2.json model specified in the codegen-resources folder for a given service. The class specifies what class to cast the returned value to. If the returned value is also a modeled class, the SdkResponse.getValueForField(String, Class) method will again be available.

Overrides:

getValueForField in class SdkResponse

Parameters:

fieldName - The name of the member to be retrieved.

clazz - The class to cast the returned object to.

Returns:

Optional containing the casted return value

sdkFields

public List<SdkField<?>> sdkFields()

Specified by:

sdkFields in interface SdkPojo

Returns:

List of SdkField in this POJO. May be empty list but should never be null.