public static interface JobOutput.Builder extends SdkPojo, CopyableBuilder<JobOutput.Builder,JobOutput>
| Modifier and Type | Method and Description |
|---|---|
default JobOutput.Builder |
albumArt(Consumer<JobAlbumArt.Builder> albumArt)
The album art to be associated with the output file, if any.
|
JobOutput.Builder |
albumArt(JobAlbumArt albumArt)
The album art to be associated with the output file, if any.
|
JobOutput.Builder |
appliedColorSpaceConversion(String appliedColorSpaceConversion)
If Elastic Transcoder used a preset with a
ColorSpaceConversionMode to transcode the output
file, the AppliedColorSpaceConversion parameter shows the conversion used. |
JobOutput.Builder |
captions(Captions captions)
You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another.
|
default JobOutput.Builder |
captions(Consumer<Captions.Builder> captions)
You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another.
|
JobOutput.Builder |
composition(Clip... composition)
You can create an output file that contains an excerpt from the input file.
|
JobOutput.Builder |
composition(Collection<Clip> composition)
You can create an output file that contains an excerpt from the input file.
|
JobOutput.Builder |
composition(Consumer<Clip.Builder>... composition)
You can create an output file that contains an excerpt from the input file.
|
JobOutput.Builder |
duration(Long duration)
Duration of the output file, in seconds.
|
JobOutput.Builder |
durationMillis(Long durationMillis)
Duration of the output file, in milliseconds.
|
default JobOutput.Builder |
encryption(Consumer<Encryption.Builder> encryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your output files.
|
JobOutput.Builder |
encryption(Encryption encryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your output files.
|
JobOutput.Builder |
fileSize(Long fileSize)
File size of the output file, in bytes.
|
JobOutput.Builder |
frameRate(String frameRate)
Frame rate of the output file, in frames per second.
|
JobOutput.Builder |
height(Integer height)
Height of the output file, in pixels.
|
JobOutput.Builder |
id(String id)
A sequential counter, starting with 1, that identifies an output among the outputs from the current job.
|
JobOutput.Builder |
key(String key)
The name to assign to the transcoded file.
|
JobOutput.Builder |
presetId(String presetId)
The value of the
Id object for the preset that you want to use for this job. |
JobOutput.Builder |
rotate(String rotate)
The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the
input.
|
JobOutput.Builder |
segmentDuration(String segmentDuration)
|
JobOutput.Builder |
status(String status)
The status of one output in a job.
|
JobOutput.Builder |
statusDetail(String statusDetail)
Information that further explains
Status. |
default JobOutput.Builder |
thumbnailEncryption(Consumer<Encryption.Builder> thumbnailEncryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
|
JobOutput.Builder |
thumbnailEncryption(Encryption thumbnailEncryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
|
JobOutput.Builder |
thumbnailPattern(String thumbnailPattern)
Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic
Transcoder to name the files.
|
JobOutput.Builder |
watermarks(Collection<JobWatermark> watermarks)
Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding.
|
JobOutput.Builder |
watermarks(Consumer<JobWatermark.Builder>... watermarks)
Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding.
|
JobOutput.Builder |
watermarks(JobWatermark... watermarks)
Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding.
|
JobOutput.Builder |
width(Integer width)
Specifies the width of the output file in pixels.
|
copyapplyMutation, buildJobOutput.Builder id(String id)
A sequential counter, starting with 1, that identifies an output among the outputs from the current job. In the Output syntax, this value is always 1.
id - A sequential counter, starting with 1, that identifies an output among the outputs from the current
job. In the Output syntax, this value is always 1.JobOutput.Builder key(String key)
The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket
specified by the OutputBucket object in the pipeline that is specified by the pipeline ID.
key - The name to assign to the transcoded file. Elastic Transcoder saves the file in the Amazon S3 bucket
specified by the OutputBucket object in the pipeline that is specified by the pipeline
ID.JobOutput.Builder thumbnailPattern(String thumbnailPattern)
Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want Elastic Transcoder to name the files.
If you don't want Elastic Transcoder to create thumbnails, specify "".
If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
{count} (Required): If you want to create thumbnails, you must include
{count} in the ThumbnailPattern object. Wherever you specify {count},
Elastic Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail file names.
The number indicates where a given thumbnail appears in the sequence of thumbnails for a transcoded file.
If you specify a literal value and/or {resolution} but you omit {count}, Elastic
Transcoder returns a validation error and does not create the job.
Literal values (Optional): You can specify literal values anywhere in the
ThumbnailPattern object. For example, you can include them as a file name prefix or as a
delimiter between {resolution} and {count}.
{resolution} (Optional): If you want Elastic Transcoder to include the resolution in the
file name, include {resolution} in the ThumbnailPattern object.
When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or .png) that
appears in the preset that you specified in the PresetID value of CreateJobOutput.
Elastic Transcoder also appends the applicable file name extension.
thumbnailPattern - Whether you want Elastic Transcoder to create thumbnails for your videos and, if so, how you want
Elastic Transcoder to name the files.
If you don't want Elastic Transcoder to create thumbnails, specify "".
If you do want Elastic Transcoder to create thumbnails, specify the information that you want to include in the file name for each thumbnail. You can specify the following values in any sequence:
{count} (Required): If you want to create thumbnails, you must include
{count} in the ThumbnailPattern object. Wherever you specify
{count}, Elastic Transcoder adds a five-digit sequence number (beginning with
00001) to thumbnail file names. The number indicates where a given thumbnail appears in the
sequence of thumbnails for a transcoded file.
If you specify a literal value and/or {resolution} but you omit {count},
Elastic Transcoder returns a validation error and does not create the job.
Literal values (Optional): You can specify literal values anywhere in the
ThumbnailPattern object. For example, you can include them as a file name prefix or as a
delimiter between {resolution} and {count}.
{resolution} (Optional): If you want Elastic Transcoder to include the resolution
in the file name, include {resolution} in the ThumbnailPattern object.
When creating thumbnails, Elastic Transcoder automatically saves the files in the format (.jpg or
.png) that appears in the preset that you specified in the PresetID value of
CreateJobOutput. Elastic Transcoder also appends the applicable file name extension.
JobOutput.Builder thumbnailEncryption(Encryption thumbnailEncryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
thumbnailEncryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.default JobOutput.Builder thumbnailEncryption(Consumer<Encryption.Builder> thumbnailEncryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your thumbnail.
This is a convenience that creates an instance of theEncryption.Builder avoiding the need to create
one manually via Encryption.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and its result
is passed to thumbnailEncryption(Encryption).thumbnailEncryption - a consumer that will call methods on Encryption.BuilderthumbnailEncryption(Encryption)JobOutput.Builder rotate(String rotate)
The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to the input. Enter one of the following values:
auto, 0, 90, 180, 270
The value auto generally works only if the file that you're transcoding contains rotation
metadata.
rotate - The number of degrees clockwise by which you want Elastic Transcoder to rotate the output relative to
the input. Enter one of the following values:
auto, 0, 90, 180, 270
The value auto generally works only if the file that you're transcoding contains rotation
metadata.
JobOutput.Builder presetId(String presetId)
The value of the Id object for the preset that you want to use for this job. The preset
determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To use a
preset that you created, specify the preset ID that Elastic Transcoder returned in the response when you
created the preset. You can also use the Elastic Transcoder system presets, which you can get with
ListPresets.
presetId - The value of the Id object for the preset that you want to use for this job. The preset
determines the audio, video, and thumbnail settings that Elastic Transcoder uses for transcoding. To
use a preset that you created, specify the preset ID that Elastic Transcoder returned in the response
when you created the preset. You can also use the Elastic Transcoder system presets, which you can get
with ListPresets.JobOutput.Builder segmentDuration(String segmentDuration)
(Outputs in Fragmented MP4 or MPEG-TS format only.
If you specify a preset in PresetId for which the value of Container is
fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the target
maximum duration of each segment in seconds. For HLSv3 format playlists, each media segment is
stored in a separate .ts file. For HLSv4, MPEG-DASH, and
Smooth playlists, all media segments for an output are stored in a single file. Each segment is
approximately the length of the SegmentDuration, though individual segments might be shorter or
longer.
The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by
SegmentDuration, the duration of the last segment is the remainder of total
length/SegmentDuration.
Elastic Transcoder creates an output-specific playlist for each output HLS output that you
specify in OutputKeys. To add an output to the master playlist for this job, include it in the
OutputKeys of the associated playlist.
segmentDuration - (Outputs in Fragmented MP4 or MPEG-TS format only.
If you specify a preset in PresetId for which the value of Container is
fmp4 (Fragmented MP4) or ts (MPEG-TS), SegmentDuration is the
target maximum duration of each segment in seconds. For HLSv3 format playlists, each
media segment is stored in a separate .ts file. For HLSv4,
MPEG-DASH, and Smooth playlists, all media segments for an output are stored
in a single file. Each segment is approximately the length of the SegmentDuration, though
individual segments might be shorter or longer.
The range of valid values is 1 to 60 seconds. If the duration of the video is not evenly divisible by
SegmentDuration, the duration of the last segment is the remainder of total
length/SegmentDuration.
Elastic Transcoder creates an output-specific playlist for each output HLS output that
you specify in OutputKeys. To add an output to the master playlist for this job, include it in the
OutputKeys of the associated playlist.
JobOutput.Builder status(String status)
The status of one output in a job. If you specified only one output for the job, Outputs:Status
is always the same as Job:Status. If you specified more than one output:
Job:Status and Outputs:Status for all of the outputs is Submitted until Elastic
Transcoder starts to process the first output.
When Elastic Transcoder starts to process the first output, Outputs:Status for that output and
Job:Status both change to Progressing. For each output, the value of Outputs:Status
remains Submitted until Elastic Transcoder starts to process the output.
Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error.
When all of the outputs reach a terminal status, Job:Status changes to Complete only if
Outputs:Status for all of the outputs is Complete. If Outputs:Status
for one or more outputs is Error, the terminal status for Job:Status is also
Error.
The value of Status is one of the following: Submitted, Progressing,
Complete, Canceled, or Error.
status - The status of one output in a job. If you specified only one output for the job,
Outputs:Status is always the same as Job:Status. If you specified more than
one output:
Job:Status and Outputs:Status for all of the outputs is Submitted until
Elastic Transcoder starts to process the first output.
When Elastic Transcoder starts to process the first output, Outputs:Status for that
output and Job:Status both change to Progressing. For each output, the value of
Outputs:Status remains Submitted until Elastic Transcoder starts to process the output.
Job:Status remains Progressing until all of the outputs reach a terminal status, either Complete or Error.
When all of the outputs reach a terminal status, Job:Status changes to Complete only if
Outputs:Status for all of the outputs is Complete. If
Outputs:Status for one or more outputs is Error, the terminal status for
Job:Status is also Error.
The value of Status is one of the following: Submitted,
Progressing, Complete, Canceled, or Error.
JobOutput.Builder statusDetail(String statusDetail)
Information that further explains Status.
statusDetail - Information that further explains Status.JobOutput.Builder duration(Long duration)
Duration of the output file, in seconds.
duration - Duration of the output file, in seconds.JobOutput.Builder width(Integer width)
Specifies the width of the output file in pixels.
width - Specifies the width of the output file in pixels.JobOutput.Builder height(Integer height)
Height of the output file, in pixels.
height - Height of the output file, in pixels.JobOutput.Builder frameRate(String frameRate)
Frame rate of the output file, in frames per second.
frameRate - Frame rate of the output file, in frames per second.JobOutput.Builder fileSize(Long fileSize)
File size of the output file, in bytes.
fileSize - File size of the output file, in bytes.JobOutput.Builder durationMillis(Long durationMillis)
Duration of the output file, in milliseconds.
durationMillis - Duration of the output file, in milliseconds.JobOutput.Builder watermarks(Collection<JobWatermark> watermarks)
Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You
can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset
that you specify in Preset for the current output.
Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add covers the first one, the third one covers the second, and the fourth one covers the third.
watermarks - Information about the watermarks that you want Elastic Transcoder to add to the video during
transcoding. You can specify up to four watermarks for each output. Settings for each watermark must
be defined in the preset that you specify in Preset for the current output.
Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add covers the first one, the third one covers the second, and the fourth one covers the third.
JobOutput.Builder watermarks(JobWatermark... watermarks)
Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You
can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset
that you specify in Preset for the current output.
Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add covers the first one, the third one covers the second, and the fourth one covers the third.
watermarks - Information about the watermarks that you want Elastic Transcoder to add to the video during
transcoding. You can specify up to four watermarks for each output. Settings for each watermark must
be defined in the preset that you specify in Preset for the current output.
Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add covers the first one, the third one covers the second, and the fourth one covers the third.
JobOutput.Builder watermarks(Consumer<JobWatermark.Builder>... watermarks)
Information about the watermarks that you want Elastic Transcoder to add to the video during transcoding. You
can specify up to four watermarks for each output. Settings for each watermark must be defined in the preset
that you specify in Preset for the current output.
Watermarks are added to the output video in the sequence in which you list them in the job output—the first watermark in the list is added to the output video first, the second watermark in the list is added next, and so on. As a result, if the settings in a preset cause Elastic Transcoder to place all watermarks in the same location, the second watermark that you add covers the first one, the third one covers the second, and the fourth one covers the third.
This is a convenience that creates an instance of theList.Builder avoiding the need to
create one manually via List#builder() .
When the Consumer completes, List.Builder#build() is called immediately and its
result is passed to #watermarks(List) .watermarks - a consumer that will call methods on List.Builder #watermarks(List) JobOutput.Builder albumArt(JobAlbumArt albumArt)
The album art to be associated with the output file, if any.
albumArt - The album art to be associated with the output file, if any.default JobOutput.Builder albumArt(Consumer<JobAlbumArt.Builder> albumArt)
The album art to be associated with the output file, if any.
This is a convenience that creates an instance of theJobAlbumArt.Builder avoiding the need to create
one manually via JobAlbumArt.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and its result
is passed to albumArt(JobAlbumArt).albumArt - a consumer that will call methods on JobAlbumArt.BuilderalbumArt(JobAlbumArt)JobOutput.Builder composition(Collection<Clip> composition)
You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.
composition - You can create an output file that contains an excerpt from the input file. This excerpt, called a
clip, can come from the beginning, middle, or end of the file. The Composition object contains
settings for the clips that make up an output file. For the current release, you can only specify
settings for a single clip per output file. The Composition object cannot be null.JobOutput.Builder composition(Clip... composition)
You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.
composition - You can create an output file that contains an excerpt from the input file. This excerpt, called a
clip, can come from the beginning, middle, or end of the file. The Composition object contains
settings for the clips that make up an output file. For the current release, you can only specify
settings for a single clip per output file. The Composition object cannot be null.JobOutput.Builder composition(Consumer<Clip.Builder>... composition)
You can create an output file that contains an excerpt from the input file. This excerpt, called a clip, can come from the beginning, middle, or end of the file. The Composition object contains settings for the clips that make up an output file. For the current release, you can only specify settings for a single clip per output file. The Composition object cannot be null.
This is a convenience that creates an instance of theList.Builder avoiding the need to create
one manually via List#builder() .
When the Consumer completes, List.Builder#build() is called immediately and its result
is passed to #composition(List) .composition - a consumer that will call methods on List.Builder #composition(List) JobOutput.Builder captions(Captions captions)
You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions:
Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file.
Valid input values include: CEA-608 (EIA-608, first non-empty channel only),
CEA-708 (EIA-708, first non-empty channel only), and mov-text
Valid outputs include: mov-text
Elastic Transcoder supports a maximum of one embedded format per output.
Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file.
Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt
Valid outputs include: dfxp (first div element only), scc, srt, and
webvtt.
If you want ttml or smpte-tt compatible captions, specify dfxp as your output format.
Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process.
To remove captions or leave the captions empty, set Captions to null. To pass through existing
captions unchanged, set the MergePolicy to MergeRetain, and pass in a null
CaptionSources array.
For more information on embedded files, see the Subtitles Wikipedia page.
For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.
captions - You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another.
All captions must be in UTF-8. Elastic Transcoder supports two types of captions:
Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file.
Valid input values include: CEA-608 (EIA-608, first non-empty channel only),
CEA-708 (EIA-708, first non-empty channel only), and mov-text
Valid outputs include: mov-text
Elastic Transcoder supports a maximum of one embedded format per output.
Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file.
Valid input values include: dfxp (first div element only), ebu-tt,
scc, smpt, srt, ttml (first div element only), and
webvtt
Valid outputs include: dfxp (first div element only), scc, srt,
and webvtt.
If you want ttml or smpte-tt compatible captions, specify dfxp as your output format.
Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process.
To remove captions or leave the captions empty, set Captions to null. To pass through
existing captions unchanged, set the MergePolicy to MergeRetain, and pass in
a null CaptionSources array.
For more information on embedded files, see the Subtitles Wikipedia page.
For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.
default JobOutput.Builder captions(Consumer<Captions.Builder> captions)
You can configure Elastic Transcoder to transcode captions, or subtitles, from one format to another. All captions must be in UTF-8. Elastic Transcoder supports two types of captions:
Embedded: Embedded captions are included in the same file as the audio and video. Elastic Transcoder supports only one embedded caption per language, to a maximum of 300 embedded captions per file.
Valid input values include: CEA-608 (EIA-608, first non-empty channel only),
CEA-708 (EIA-708, first non-empty channel only), and mov-text
Valid outputs include: mov-text
Elastic Transcoder supports a maximum of one embedded format per output.
Sidecar: Sidecar captions are kept in a separate metadata file from the audio and video data. Sidecar captions require a player that is capable of understanding the relationship between the video file and the sidecar file. Elastic Transcoder supports only one sidecar caption per language, to a maximum of 20 sidecar captions per file.
Valid input values include: dfxp (first div element only), ebu-tt, scc, smpt, srt, ttml (first div element only), and webvtt
Valid outputs include: dfxp (first div element only), scc, srt, and
webvtt.
If you want ttml or smpte-tt compatible captions, specify dfxp as your output format.
Elastic Transcoder does not support OCR (Optical Character Recognition), does not accept pictures as a valid input for captions, and is not available for audio-only transcoding. Elastic Transcoder does not preserve text formatting (for example, italics) during the transcoding process.
To remove captions or leave the captions empty, set Captions to null. To pass through existing
captions unchanged, set the MergePolicy to MergeRetain, and pass in a null
CaptionSources array.
For more information on embedded files, see the Subtitles Wikipedia page.
For more information on sidecar files, see the Extensible Metadata Platform and Sidecar file Wikipedia pages.
This is a convenience that creates an instance of theCaptions.Builder avoiding the need to create
one manually via Captions.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and its result is
passed to captions(Captions).captions - a consumer that will call methods on Captions.Buildercaptions(Captions)JobOutput.Builder encryption(Encryption encryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder writes an unencrypted file to your Amazon S3 bucket.
encryption - The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If
you choose to use encryption, you must specify a mode to use. If you choose not to use encryption,
Elastic Transcoder writes an unencrypted file to your Amazon S3 bucket.default JobOutput.Builder encryption(Consumer<Encryption.Builder> encryption)
The encryption settings, if any, that you want Elastic Transcoder to apply to your output files. If you choose to use encryption, you must specify a mode to use. If you choose not to use encryption, Elastic Transcoder writes an unencrypted file to your Amazon S3 bucket.
This is a convenience that creates an instance of theEncryption.Builder avoiding the need to create
one manually via Encryption.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and its result
is passed to encryption(Encryption).encryption - a consumer that will call methods on Encryption.Builderencryption(Encryption)JobOutput.Builder appliedColorSpaceConversion(String appliedColorSpaceConversion)
If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the output
file, the AppliedColorSpaceConversion parameter shows the conversion used. If no
ColorSpaceConversionMode was defined in the preset, this parameter is not be included in the job
response.
appliedColorSpaceConversion - If Elastic Transcoder used a preset with a ColorSpaceConversionMode to transcode the
output file, the AppliedColorSpaceConversion parameter shows the conversion used. If no
ColorSpaceConversionMode was defined in the preset, this parameter is not be included in
the job response.Copyright © 2017 Amazon Web Services, Inc. All Rights Reserved.