public static interface CreateTargetGroupRequest.Builder extends ElasticLoadBalancingV2Request.Builder, SdkPojo, CopyableBuilder<CreateTargetGroupRequest.Builder,CreateTargetGroupRequest>
| Modifier and Type | Method and Description |
|---|---|
CreateTargetGroupRequest.Builder |
healthCheckEnabled(Boolean healthCheckEnabled)
Indicates whether health checks are enabled.
|
CreateTargetGroupRequest.Builder |
healthCheckIntervalSeconds(Integer healthCheckIntervalSeconds)
The approximate amount of time, in seconds, between health checks of an individual target.
|
CreateTargetGroupRequest.Builder |
healthCheckPath(String healthCheckPath)
[HTTP/HTTPS health checks] The ping path that is the destination on the targets for health checks.
|
CreateTargetGroupRequest.Builder |
healthCheckPort(String healthCheckPort)
The port the load balancer uses when performing health checks on targets.
|
CreateTargetGroupRequest.Builder |
healthCheckProtocol(ProtocolEnum healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets.
|
CreateTargetGroupRequest.Builder |
healthCheckProtocol(String healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets.
|
CreateTargetGroupRequest.Builder |
healthCheckTimeoutSeconds(Integer healthCheckTimeoutSeconds)
The amount of time, in seconds, during which no response from a target means a failed health check.
|
CreateTargetGroupRequest.Builder |
healthyThresholdCount(Integer healthyThresholdCount)
The number of consecutive health checks successes required before considering an unhealthy target healthy.
|
default CreateTargetGroupRequest.Builder |
matcher(Consumer<Matcher.Builder> matcher)
[HTTP/HTTPS health checks] The HTTP codes to use when checking for a successful response from a target.
|
CreateTargetGroupRequest.Builder |
matcher(Matcher matcher)
[HTTP/HTTPS health checks] The HTTP codes to use when checking for a successful response from a target.
|
CreateTargetGroupRequest.Builder |
name(String name)
The name of the target group.
|
CreateTargetGroupRequest.Builder |
overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
Add an optional request override configuration.
|
CreateTargetGroupRequest.Builder |
overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
Add an optional request override configuration.
|
CreateTargetGroupRequest.Builder |
port(Integer port)
The port on which the targets receive traffic.
|
CreateTargetGroupRequest.Builder |
protocol(ProtocolEnum protocol)
The protocol to use for routing traffic to the targets.
|
CreateTargetGroupRequest.Builder |
protocol(String protocol)
The protocol to use for routing traffic to the targets.
|
CreateTargetGroupRequest.Builder |
targetType(String targetType)
The type of target that you must specify when registering targets with this target group.
|
CreateTargetGroupRequest.Builder |
targetType(TargetTypeEnum targetType)
The type of target that you must specify when registering targets with this target group.
|
CreateTargetGroupRequest.Builder |
unhealthyThresholdCount(Integer unhealthyThresholdCount)
The number of consecutive health check failures required before considering a target unhealthy.
|
CreateTargetGroupRequest.Builder |
vpcId(String vpcId)
The identifier of the virtual private cloud (VPC).
|
buildoverrideConfigurationcopyapplyMutation, buildCreateTargetGroupRequest.Builder name(String name)
The name of the target group.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
name - The name of the target group.
This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.
CreateTargetGroupRequest.Builder protocol(String protocol)
The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocol is TCP. If the target is a Lambda function, this parameter does not apply.
protocol - The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported
protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocol is TCP. If the target
is a Lambda function, this parameter does not apply.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder protocol(ProtocolEnum protocol)
The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocol is TCP. If the target is a Lambda function, this parameter does not apply.
protocol - The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported
protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocol is TCP. If the target
is a Lambda function, this parameter does not apply.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder port(Integer port)
The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. If the target is a Lambda function, this parameter does not apply.
port - The port on which the targets receive traffic. This port is used unless you specify a port override
when registering the target. If the target is a Lambda function, this parameter does not apply.CreateTargetGroupRequest.Builder vpcId(String vpcId)
The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter does not apply.
vpcId - The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter
does not apply.CreateTargetGroupRequest.Builder healthCheckProtocol(String healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets. The TCP protocol is supported only if the protocol of the target group is TCP. For Application Load Balancers, the default is HTTP. For Network Load Balancers, the default is TCP.
healthCheckProtocol - The protocol the load balancer uses when performing health checks on targets. The TCP protocol is
supported only if the protocol of the target group is TCP. For Application Load Balancers, the default
is HTTP. For Network Load Balancers, the default is TCP.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder healthCheckProtocol(ProtocolEnum healthCheckProtocol)
The protocol the load balancer uses when performing health checks on targets. The TCP protocol is supported only if the protocol of the target group is TCP. For Application Load Balancers, the default is HTTP. For Network Load Balancers, the default is TCP.
healthCheckProtocol - The protocol the load balancer uses when performing health checks on targets. The TCP protocol is
supported only if the protocol of the target group is TCP. For Application Load Balancers, the default
is HTTP. For Network Load Balancers, the default is TCP.ProtocolEnum,
ProtocolEnumCreateTargetGroupRequest.Builder healthCheckPort(String healthCheckPort)
The port the load balancer uses when performing health checks on targets. The default is
traffic-port, which is the port on which each target receives traffic from the load balancer.
healthCheckPort - The port the load balancer uses when performing health checks on targets. The default is
traffic-port, which is the port on which each target receives traffic from the load
balancer.CreateTargetGroupRequest.Builder healthCheckEnabled(Boolean healthCheckEnabled)
Indicates whether health checks are enabled. If the target type is instance or ip,
the default is true. If the target type is lambda, the default is
false.
healthCheckEnabled - Indicates whether health checks are enabled. If the target type is instance or
ip, the default is true. If the target type is lambda, the
default is false.CreateTargetGroupRequest.Builder healthCheckPath(String healthCheckPath)
[HTTP/HTTPS health checks] The ping path that is the destination on the targets for health checks. The default is /.
healthCheckPath - [HTTP/HTTPS health checks] The ping path that is the destination on the targets for health checks. The
default is /.CreateTargetGroupRequest.Builder healthCheckIntervalSeconds(Integer healthCheckIntervalSeconds)
The approximate amount of time, in seconds, between health checks of an individual target. For Application
Load Balancers, the range is 5–300 seconds. For Network Load Balancers, the supported values are 10 or 30
seconds. If the target type is instance or ip, the default is 30 seconds. If the
target type is lambda, the default is 35 seconds.
healthCheckIntervalSeconds - The approximate amount of time, in seconds, between health checks of an individual target. For
Application Load Balancers, the range is 5–300 seconds. For Network Load Balancers, the supported
values are 10 or 30 seconds. If the target type is instance or ip, the
default is 30 seconds. If the target type is lambda, the default is 35 seconds.CreateTargetGroupRequest.Builder healthCheckTimeoutSeconds(Integer healthCheckTimeoutSeconds)
The amount of time, in seconds, during which no response from a target means a failed health check. For
Application Load Balancers, the range is 2–120 seconds and the default is 5 seconds if the target type is
instance or ip and 30 seconds if the target type is lambda. For
Network Load Balancers, this is 10 seconds for TCP and HTTPS health checks and 6 seconds for HTTP health
checks.
healthCheckTimeoutSeconds - The amount of time, in seconds, during which no response from a target means a failed health check.
For Application Load Balancers, the range is 2–120 seconds and the default is 5 seconds if the target
type is instance or ip and 30 seconds if the target type is
lambda. For Network Load Balancers, this is 10 seconds for TCP and HTTPS health checks
and 6 seconds for HTTP health checks.CreateTargetGroupRequest.Builder healthyThresholdCount(Integer healthyThresholdCount)
The number of consecutive health checks successes required before considering an unhealthy target healthy. For Application Load Balancers, the default is 5. For Network Load Balancers, the default is 3.
healthyThresholdCount - The number of consecutive health checks successes required before considering an unhealthy target
healthy. For Application Load Balancers, the default is 5. For Network Load Balancers, the default is
3.CreateTargetGroupRequest.Builder unhealthyThresholdCount(Integer unhealthyThresholdCount)
The number of consecutive health check failures required before considering a target unhealthy. For Application Load Balancers, the default is 2. For Network Load Balancers, this value must be the same as the healthy threshold count.
unhealthyThresholdCount - The number of consecutive health check failures required before considering a target unhealthy. For
Application Load Balancers, the default is 2. For Network Load Balancers, this value must be the same
as the healthy threshold count.CreateTargetGroupRequest.Builder matcher(Matcher matcher)
[HTTP/HTTPS health checks] The HTTP codes to use when checking for a successful response from a target.
matcher - [HTTP/HTTPS health checks] The HTTP codes to use when checking for a successful response from a
target.default CreateTargetGroupRequest.Builder matcher(Consumer<Matcher.Builder> matcher)
[HTTP/HTTPS health checks] The HTTP codes to use when checking for a successful response from a target.
This is a convenience that creates an instance of theMatcher.Builder avoiding the need to create one
manually via Matcher.builder().
When the Consumer completes, SdkBuilder.build() is called immediately and its result is
passed to matcher(Matcher).matcher - a consumer that will call methods on Matcher.Buildermatcher(Matcher)CreateTargetGroupRequest.Builder targetType(String targetType)
The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.
instance - Targets are specified by instance ID. This is the default value.
ip - Targets are specified by IP address. You can specify IP addresses from the subnets of the
virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and
192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.
lambda - The target groups contains a single Lambda function.
targetType - The type of target that you must specify when registering targets with this target group. You can't
specify targets for a target group using more than one target type.
instance - Targets are specified by instance ID. This is the default value.
ip - Targets are specified by IP address. You can specify IP addresses from the subnets
of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8,
172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly
routable IP addresses.
lambda - The target groups contains a single Lambda function.
TargetTypeEnum,
TargetTypeEnumCreateTargetGroupRequest.Builder targetType(TargetTypeEnum targetType)
The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.
instance - Targets are specified by instance ID. This is the default value.
ip - Targets are specified by IP address. You can specify IP addresses from the subnets of the
virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and
192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.
lambda - The target groups contains a single Lambda function.
targetType - The type of target that you must specify when registering targets with this target group. You can't
specify targets for a target group using more than one target type.
instance - Targets are specified by instance ID. This is the default value.
ip - Targets are specified by IP address. You can specify IP addresses from the subnets
of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8,
172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly
routable IP addresses.
lambda - The target groups contains a single Lambda function.
TargetTypeEnum,
TargetTypeEnumCreateTargetGroupRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
AwsRequest.BuilderoverrideConfiguration in interface AwsRequest.BuilderoverrideConfiguration - The override configuration.CreateTargetGroupRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
AwsRequest.BuilderoverrideConfiguration in interface AwsRequest.BuilderbuilderConsumer - A Consumer to which an empty AwsRequestOverrideConfiguration.Builder will be
given.Copyright © 2017 Amazon Web Services, Inc. All Rights Reserved.