AWS SDK for C++  1.9.66
AWS SDK for C++
Public Member Functions | List of all members
Aws::MediaConvert::Model::Vp8Settings Class Reference

#include <Vp8Settings.h>

Public Member Functions

 Vp8Settings ()
 
 Vp8Settings (Aws::Utils::Json::JsonView jsonValue)
 
Vp8Settingsoperator= (Aws::Utils::Json::JsonView jsonValue)
 
Aws::Utils::Json::JsonValue Jsonize () const
 
int GetBitrate () const
 
bool BitrateHasBeenSet () const
 
void SetBitrate (int value)
 
Vp8SettingsWithBitrate (int value)
 
const Vp8FramerateControlGetFramerateControl () const
 
bool FramerateControlHasBeenSet () const
 
void SetFramerateControl (const Vp8FramerateControl &value)
 
void SetFramerateControl (Vp8FramerateControl &&value)
 
Vp8SettingsWithFramerateControl (const Vp8FramerateControl &value)
 
Vp8SettingsWithFramerateControl (Vp8FramerateControl &&value)
 
const Vp8FramerateConversionAlgorithmGetFramerateConversionAlgorithm () const
 
bool FramerateConversionAlgorithmHasBeenSet () const
 
void SetFramerateConversionAlgorithm (const Vp8FramerateConversionAlgorithm &value)
 
void SetFramerateConversionAlgorithm (Vp8FramerateConversionAlgorithm &&value)
 
Vp8SettingsWithFramerateConversionAlgorithm (const Vp8FramerateConversionAlgorithm &value)
 
Vp8SettingsWithFramerateConversionAlgorithm (Vp8FramerateConversionAlgorithm &&value)
 
int GetFramerateDenominator () const
 
bool FramerateDenominatorHasBeenSet () const
 
void SetFramerateDenominator (int value)
 
Vp8SettingsWithFramerateDenominator (int value)
 
int GetFramerateNumerator () const
 
bool FramerateNumeratorHasBeenSet () const
 
void SetFramerateNumerator (int value)
 
Vp8SettingsWithFramerateNumerator (int value)
 
double GetGopSize () const
 
bool GopSizeHasBeenSet () const
 
void SetGopSize (double value)
 
Vp8SettingsWithGopSize (double value)
 
int GetHrdBufferSize () const
 
bool HrdBufferSizeHasBeenSet () const
 
void SetHrdBufferSize (int value)
 
Vp8SettingsWithHrdBufferSize (int value)
 
int GetMaxBitrate () const
 
bool MaxBitrateHasBeenSet () const
 
void SetMaxBitrate (int value)
 
Vp8SettingsWithMaxBitrate (int value)
 
const Vp8ParControlGetParControl () const
 
bool ParControlHasBeenSet () const
 
void SetParControl (const Vp8ParControl &value)
 
void SetParControl (Vp8ParControl &&value)
 
Vp8SettingsWithParControl (const Vp8ParControl &value)
 
Vp8SettingsWithParControl (Vp8ParControl &&value)
 
int GetParDenominator () const
 
bool ParDenominatorHasBeenSet () const
 
void SetParDenominator (int value)
 
Vp8SettingsWithParDenominator (int value)
 
int GetParNumerator () const
 
bool ParNumeratorHasBeenSet () const
 
void SetParNumerator (int value)
 
Vp8SettingsWithParNumerator (int value)
 
const Vp8QualityTuningLevelGetQualityTuningLevel () const
 
bool QualityTuningLevelHasBeenSet () const
 
void SetQualityTuningLevel (const Vp8QualityTuningLevel &value)
 
void SetQualityTuningLevel (Vp8QualityTuningLevel &&value)
 
Vp8SettingsWithQualityTuningLevel (const Vp8QualityTuningLevel &value)
 
Vp8SettingsWithQualityTuningLevel (Vp8QualityTuningLevel &&value)
 
const Vp8RateControlModeGetRateControlMode () const
 
bool RateControlModeHasBeenSet () const
 
void SetRateControlMode (const Vp8RateControlMode &value)
 
void SetRateControlMode (Vp8RateControlMode &&value)
 
Vp8SettingsWithRateControlMode (const Vp8RateControlMode &value)
 
Vp8SettingsWithRateControlMode (Vp8RateControlMode &&value)
 

Detailed Description

Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value VP8.

See Also:

AWS API Reference

Definition at line 36 of file Vp8Settings.h.

Constructor & Destructor Documentation

◆ Vp8Settings() [1/2]

Aws::MediaConvert::Model::Vp8Settings::Vp8Settings ( )

◆ Vp8Settings() [2/2]

Aws::MediaConvert::Model::Vp8Settings::Vp8Settings ( Aws::Utils::Json::JsonView  jsonValue)

Member Function Documentation

◆ BitrateHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::BitrateHasBeenSet ( ) const
inline

Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

Definition at line 55 of file Vp8Settings.h.

◆ FramerateControlHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::FramerateControlHasBeenSet ( ) const
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 98 of file Vp8Settings.h.

◆ FramerateConversionAlgorithmHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::FramerateConversionAlgorithmHasBeenSet ( ) const
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 187 of file Vp8Settings.h.

◆ FramerateDenominatorHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::FramerateDenominatorHasBeenSet ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 264 of file Vp8Settings.h.

◆ FramerateNumeratorHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::FramerateNumeratorHasBeenSet ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 305 of file Vp8Settings.h.

◆ GetBitrate()

int Aws::MediaConvert::Model::Vp8Settings::GetBitrate ( ) const
inline

Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

Definition at line 49 of file Vp8Settings.h.

◆ GetFramerateControl()

const Vp8FramerateControl& Aws::MediaConvert::Model::Vp8Settings::GetFramerateControl ( ) const
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 83 of file Vp8Settings.h.

◆ GetFramerateConversionAlgorithm()

const Vp8FramerateConversionAlgorithm& Aws::MediaConvert::Model::Vp8Settings::GetFramerateConversionAlgorithm ( ) const
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 173 of file Vp8Settings.h.

◆ GetFramerateDenominator()

int Aws::MediaConvert::Model::Vp8Settings::GetFramerateDenominator ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 254 of file Vp8Settings.h.

◆ GetFramerateNumerator()

int Aws::MediaConvert::Model::Vp8Settings::GetFramerateNumerator ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 295 of file Vp8Settings.h.

◆ GetGopSize()

double Aws::MediaConvert::Model::Vp8Settings::GetGopSize ( ) const
inline

GOP Length (keyframe interval) in frames. Must be greater than zero.

Definition at line 331 of file Vp8Settings.h.

◆ GetHrdBufferSize()

int Aws::MediaConvert::Model::Vp8Settings::GetHrdBufferSize ( ) const
inline

Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Definition at line 353 of file Vp8Settings.h.

◆ GetMaxBitrate()

int Aws::MediaConvert::Model::Vp8Settings::GetMaxBitrate ( ) const
inline

Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

Definition at line 380 of file Vp8Settings.h.

◆ GetParControl()

const Vp8ParControl& Aws::MediaConvert::Model::Vp8Settings::GetParControl ( ) const
inline

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Definition at line 416 of file Vp8Settings.h.

◆ GetParDenominator()

int Aws::MediaConvert::Model::Vp8Settings::GetParDenominator ( ) const
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Definition at line 482 of file Vp8Settings.h.

◆ GetParNumerator()

int Aws::MediaConvert::Model::Vp8Settings::GetParNumerator ( ) const
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

Definition at line 523 of file Vp8Settings.h.

◆ GetQualityTuningLevel()

const Vp8QualityTuningLevel& Aws::MediaConvert::Model::Vp8Settings::GetQualityTuningLevel ( ) const
inline

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Definition at line 561 of file Vp8Settings.h.

◆ GetRateControlMode()

const Vp8RateControlMode& Aws::MediaConvert::Model::Vp8Settings::GetRateControlMode ( ) const
inline

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Definition at line 603 of file Vp8Settings.h.

◆ GopSizeHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::GopSizeHasBeenSet ( ) const
inline

GOP Length (keyframe interval) in frames. Must be greater than zero.

Definition at line 336 of file Vp8Settings.h.

◆ HrdBufferSizeHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::HrdBufferSizeHasBeenSet ( ) const
inline

Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Definition at line 359 of file Vp8Settings.h.

◆ Jsonize()

Aws::Utils::Json::JsonValue Aws::MediaConvert::Model::Vp8Settings::Jsonize ( ) const

◆ MaxBitrateHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::MaxBitrateHasBeenSet ( ) const
inline

Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

Definition at line 388 of file Vp8Settings.h.

◆ operator=()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::operator= ( Aws::Utils::Json::JsonView  jsonValue)

◆ ParControlHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::ParControlHasBeenSet ( ) const
inline

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Definition at line 427 of file Vp8Settings.h.

◆ ParDenominatorHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::ParDenominatorHasBeenSet ( ) const
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Definition at line 492 of file Vp8Settings.h.

◆ ParNumeratorHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::ParNumeratorHasBeenSet ( ) const
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

Definition at line 533 of file Vp8Settings.h.

◆ QualityTuningLevelHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::QualityTuningLevelHasBeenSet ( ) const
inline

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Definition at line 568 of file Vp8Settings.h.

◆ RateControlModeHasBeenSet()

bool Aws::MediaConvert::Model::Vp8Settings::RateControlModeHasBeenSet ( ) const
inline

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Definition at line 609 of file Vp8Settings.h.

◆ SetBitrate()

void Aws::MediaConvert::Model::Vp8Settings::SetBitrate ( int  value)
inline

Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

Definition at line 61 of file Vp8Settings.h.

◆ SetFramerateControl() [1/2]

void Aws::MediaConvert::Model::Vp8Settings::SetFramerateControl ( const Vp8FramerateControl value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 113 of file Vp8Settings.h.

◆ SetFramerateControl() [2/2]

void Aws::MediaConvert::Model::Vp8Settings::SetFramerateControl ( Vp8FramerateControl &&  value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 128 of file Vp8Settings.h.

◆ SetFramerateConversionAlgorithm() [1/2]

void Aws::MediaConvert::Model::Vp8Settings::SetFramerateConversionAlgorithm ( const Vp8FramerateConversionAlgorithm value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 201 of file Vp8Settings.h.

◆ SetFramerateConversionAlgorithm() [2/2]

void Aws::MediaConvert::Model::Vp8Settings::SetFramerateConversionAlgorithm ( Vp8FramerateConversionAlgorithm &&  value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 215 of file Vp8Settings.h.

◆ SetFramerateDenominator()

void Aws::MediaConvert::Model::Vp8Settings::SetFramerateDenominator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 274 of file Vp8Settings.h.

◆ SetFramerateNumerator()

void Aws::MediaConvert::Model::Vp8Settings::SetFramerateNumerator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 315 of file Vp8Settings.h.

◆ SetGopSize()

void Aws::MediaConvert::Model::Vp8Settings::SetGopSize ( double  value)
inline

GOP Length (keyframe interval) in frames. Must be greater than zero.

Definition at line 341 of file Vp8Settings.h.

◆ SetHrdBufferSize()

void Aws::MediaConvert::Model::Vp8Settings::SetHrdBufferSize ( int  value)
inline

Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Definition at line 365 of file Vp8Settings.h.

◆ SetMaxBitrate()

void Aws::MediaConvert::Model::Vp8Settings::SetMaxBitrate ( int  value)
inline

Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

Definition at line 396 of file Vp8Settings.h.

◆ SetParControl() [1/2]

void Aws::MediaConvert::Model::Vp8Settings::SetParControl ( const Vp8ParControl value)
inline

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Definition at line 438 of file Vp8Settings.h.

◆ SetParControl() [2/2]

void Aws::MediaConvert::Model::Vp8Settings::SetParControl ( Vp8ParControl &&  value)
inline

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Definition at line 449 of file Vp8Settings.h.

◆ SetParDenominator()

void Aws::MediaConvert::Model::Vp8Settings::SetParDenominator ( int  value)
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Definition at line 502 of file Vp8Settings.h.

◆ SetParNumerator()

void Aws::MediaConvert::Model::Vp8Settings::SetParNumerator ( int  value)
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

Definition at line 543 of file Vp8Settings.h.

◆ SetQualityTuningLevel() [1/2]

void Aws::MediaConvert::Model::Vp8Settings::SetQualityTuningLevel ( const Vp8QualityTuningLevel value)
inline

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Definition at line 575 of file Vp8Settings.h.

◆ SetQualityTuningLevel() [2/2]

void Aws::MediaConvert::Model::Vp8Settings::SetQualityTuningLevel ( Vp8QualityTuningLevel &&  value)
inline

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Definition at line 582 of file Vp8Settings.h.

◆ SetRateControlMode() [1/2]

void Aws::MediaConvert::Model::Vp8Settings::SetRateControlMode ( const Vp8RateControlMode value)
inline

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Definition at line 615 of file Vp8Settings.h.

◆ SetRateControlMode() [2/2]

void Aws::MediaConvert::Model::Vp8Settings::SetRateControlMode ( Vp8RateControlMode &&  value)
inline

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Definition at line 621 of file Vp8Settings.h.

◆ WithBitrate()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithBitrate ( int  value)
inline

Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

Definition at line 67 of file Vp8Settings.h.

◆ WithFramerateControl() [1/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithFramerateControl ( const Vp8FramerateControl value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 143 of file Vp8Settings.h.

◆ WithFramerateControl() [2/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithFramerateControl ( Vp8FramerateControl &&  value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 158 of file Vp8Settings.h.

◆ WithFramerateConversionAlgorithm() [1/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithFramerateConversionAlgorithm ( const Vp8FramerateConversionAlgorithm value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 229 of file Vp8Settings.h.

◆ WithFramerateConversionAlgorithm() [2/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithFramerateConversionAlgorithm ( Vp8FramerateConversionAlgorithm &&  value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 243 of file Vp8Settings.h.

◆ WithFramerateDenominator()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithFramerateDenominator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 284 of file Vp8Settings.h.

◆ WithFramerateNumerator()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithFramerateNumerator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 325 of file Vp8Settings.h.

◆ WithGopSize()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithGopSize ( double  value)
inline

GOP Length (keyframe interval) in frames. Must be greater than zero.

Definition at line 346 of file Vp8Settings.h.

◆ WithHrdBufferSize()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithHrdBufferSize ( int  value)
inline

Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Definition at line 371 of file Vp8Settings.h.

◆ WithMaxBitrate()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithMaxBitrate ( int  value)
inline

Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

Definition at line 404 of file Vp8Settings.h.

◆ WithParControl() [1/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithParControl ( const Vp8ParControl value)
inline

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Definition at line 460 of file Vp8Settings.h.

◆ WithParControl() [2/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithParControl ( Vp8ParControl &&  value)
inline

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Definition at line 471 of file Vp8Settings.h.

◆ WithParDenominator()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithParDenominator ( int  value)
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Definition at line 512 of file Vp8Settings.h.

◆ WithParNumerator()

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithParNumerator ( int  value)
inline

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

Definition at line 553 of file Vp8Settings.h.

◆ WithQualityTuningLevel() [1/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithQualityTuningLevel ( const Vp8QualityTuningLevel value)
inline

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Definition at line 589 of file Vp8Settings.h.

◆ WithQualityTuningLevel() [2/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithQualityTuningLevel ( Vp8QualityTuningLevel &&  value)
inline

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Definition at line 596 of file Vp8Settings.h.

◆ WithRateControlMode() [1/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithRateControlMode ( const Vp8RateControlMode value)
inline

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Definition at line 627 of file Vp8Settings.h.

◆ WithRateControlMode() [2/2]

Vp8Settings& Aws::MediaConvert::Model::Vp8Settings::WithRateControlMode ( Vp8RateControlMode &&  value)
inline

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Definition at line 633 of file Vp8Settings.h.


The documentation for this class was generated from the following file: