AWS SDK for C++  1.9.71
AWS SDK for C++
Public Member Functions | List of all members
Aws::MediaConvert::Model::AvcIntraSettings Class Reference

#include <AvcIntraSettings.h>

Public Member Functions

 AvcIntraSettings ()
 
 AvcIntraSettings (Aws::Utils::Json::JsonView jsonValue)
 
AvcIntraSettingsoperator= (Aws::Utils::Json::JsonView jsonValue)
 
Aws::Utils::Json::JsonValue Jsonize () const
 
const AvcIntraClassGetAvcIntraClass () const
 
bool AvcIntraClassHasBeenSet () const
 
void SetAvcIntraClass (const AvcIntraClass &value)
 
void SetAvcIntraClass (AvcIntraClass &&value)
 
AvcIntraSettingsWithAvcIntraClass (const AvcIntraClass &value)
 
AvcIntraSettingsWithAvcIntraClass (AvcIntraClass &&value)
 
const AvcIntraUhdSettingsGetAvcIntraUhdSettings () const
 
bool AvcIntraUhdSettingsHasBeenSet () const
 
void SetAvcIntraUhdSettings (const AvcIntraUhdSettings &value)
 
void SetAvcIntraUhdSettings (AvcIntraUhdSettings &&value)
 
AvcIntraSettingsWithAvcIntraUhdSettings (const AvcIntraUhdSettings &value)
 
AvcIntraSettingsWithAvcIntraUhdSettings (AvcIntraUhdSettings &&value)
 
const AvcIntraFramerateControlGetFramerateControl () const
 
bool FramerateControlHasBeenSet () const
 
void SetFramerateControl (const AvcIntraFramerateControl &value)
 
void SetFramerateControl (AvcIntraFramerateControl &&value)
 
AvcIntraSettingsWithFramerateControl (const AvcIntraFramerateControl &value)
 
AvcIntraSettingsWithFramerateControl (AvcIntraFramerateControl &&value)
 
const AvcIntraFramerateConversionAlgorithmGetFramerateConversionAlgorithm () const
 
bool FramerateConversionAlgorithmHasBeenSet () const
 
void SetFramerateConversionAlgorithm (const AvcIntraFramerateConversionAlgorithm &value)
 
void SetFramerateConversionAlgorithm (AvcIntraFramerateConversionAlgorithm &&value)
 
AvcIntraSettingsWithFramerateConversionAlgorithm (const AvcIntraFramerateConversionAlgorithm &value)
 
AvcIntraSettingsWithFramerateConversionAlgorithm (AvcIntraFramerateConversionAlgorithm &&value)
 
int GetFramerateDenominator () const
 
bool FramerateDenominatorHasBeenSet () const
 
void SetFramerateDenominator (int value)
 
AvcIntraSettingsWithFramerateDenominator (int value)
 
int GetFramerateNumerator () const
 
bool FramerateNumeratorHasBeenSet () const
 
void SetFramerateNumerator (int value)
 
AvcIntraSettingsWithFramerateNumerator (int value)
 
const AvcIntraInterlaceModeGetInterlaceMode () const
 
bool InterlaceModeHasBeenSet () const
 
void SetInterlaceMode (const AvcIntraInterlaceMode &value)
 
void SetInterlaceMode (AvcIntraInterlaceMode &&value)
 
AvcIntraSettingsWithInterlaceMode (const AvcIntraInterlaceMode &value)
 
AvcIntraSettingsWithInterlaceMode (AvcIntraInterlaceMode &&value)
 
const AvcIntraScanTypeConversionModeGetScanTypeConversionMode () const
 
bool ScanTypeConversionModeHasBeenSet () const
 
void SetScanTypeConversionMode (const AvcIntraScanTypeConversionMode &value)
 
void SetScanTypeConversionMode (AvcIntraScanTypeConversionMode &&value)
 
AvcIntraSettingsWithScanTypeConversionMode (const AvcIntraScanTypeConversionMode &value)
 
AvcIntraSettingsWithScanTypeConversionMode (AvcIntraScanTypeConversionMode &&value)
 
const AvcIntraSlowPalGetSlowPal () const
 
bool SlowPalHasBeenSet () const
 
void SetSlowPal (const AvcIntraSlowPal &value)
 
void SetSlowPal (AvcIntraSlowPal &&value)
 
AvcIntraSettingsWithSlowPal (const AvcIntraSlowPal &value)
 
AvcIntraSettingsWithSlowPal (AvcIntraSlowPal &&value)
 
const AvcIntraTelecineGetTelecine () const
 
bool TelecineHasBeenSet () const
 
void SetTelecine (const AvcIntraTelecine &value)
 
void SetTelecine (AvcIntraTelecine &&value)
 
AvcIntraSettingsWithTelecine (const AvcIntraTelecine &value)
 
AvcIntraSettingsWithTelecine (AvcIntraTelecine &&value)
 

Detailed Description

Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.

See Also:

AWS API Reference

Definition at line 44 of file AvcIntraSettings.h.

Constructor & Destructor Documentation

◆ AvcIntraSettings() [1/2]

Aws::MediaConvert::Model::AvcIntraSettings::AvcIntraSettings ( )

◆ AvcIntraSettings() [2/2]

Aws::MediaConvert::Model::AvcIntraSettings::AvcIntraSettings ( Aws::Utils::Json::JsonView  jsonValue)

Member Function Documentation

◆ AvcIntraClassHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::AvcIntraClassHasBeenSet ( ) const
inline

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

Definition at line 69 of file AvcIntraSettings.h.

◆ AvcIntraUhdSettingsHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::AvcIntraUhdSettingsHasBeenSet ( ) const
inline

Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.

Definition at line 120 of file AvcIntraSettings.h.

◆ FramerateControlHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::FramerateControlHasBeenSet ( ) const
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 179 of file AvcIntraSettings.h.

◆ FramerateConversionAlgorithmHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::FramerateConversionAlgorithmHasBeenSet ( ) const
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 268 of file AvcIntraSettings.h.

◆ FramerateDenominatorHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::FramerateDenominatorHasBeenSet ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 345 of file AvcIntraSettings.h.

◆ FramerateNumeratorHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::FramerateNumeratorHasBeenSet ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 386 of file AvcIntraSettings.h.

◆ GetAvcIntraClass()

const AvcIntraClass& Aws::MediaConvert::Model::AvcIntraSettings::GetAvcIntraClass ( ) const
inline

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

Definition at line 60 of file AvcIntraSettings.h.

◆ GetAvcIntraUhdSettings()

const AvcIntraUhdSettings& Aws::MediaConvert::Model::AvcIntraSettings::GetAvcIntraUhdSettings ( ) const
inline

Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.

Definition at line 113 of file AvcIntraSettings.h.

◆ GetFramerateControl()

const AvcIntraFramerateControl& Aws::MediaConvert::Model::AvcIntraSettings::GetFramerateControl ( ) const
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 164 of file AvcIntraSettings.h.

◆ GetFramerateConversionAlgorithm()

const AvcIntraFramerateConversionAlgorithm& Aws::MediaConvert::Model::AvcIntraSettings::GetFramerateConversionAlgorithm ( ) const
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 254 of file AvcIntraSettings.h.

◆ GetFramerateDenominator()

int Aws::MediaConvert::Model::AvcIntraSettings::GetFramerateDenominator ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 335 of file AvcIntraSettings.h.

◆ GetFramerateNumerator()

int Aws::MediaConvert::Model::AvcIntraSettings::GetFramerateNumerator ( ) const
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 376 of file AvcIntraSettings.h.

◆ GetInterlaceMode()

const AvcIntraInterlaceMode& Aws::MediaConvert::Model::AvcIntraSettings::GetInterlaceMode ( ) const
inline

Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Definition at line 423 of file AvcIntraSettings.h.

◆ GetScanTypeConversionMode()

const AvcIntraScanTypeConversionMode& Aws::MediaConvert::Model::AvcIntraSettings::GetScanTypeConversionMode ( ) const
inline

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).

Definition at line 521 of file AvcIntraSettings.h.

◆ GetSlowPal()

const AvcIntraSlowPal& Aws::MediaConvert::Model::AvcIntraSettings::GetSlowPal ( ) const
inline

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.

Definition at line 618 of file AvcIntraSettings.h.

◆ GetTelecine()

const AvcIntraTelecine& Aws::MediaConvert::Model::AvcIntraSettings::GetTelecine ( ) const
inline

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

Definition at line 683 of file AvcIntraSettings.h.

◆ InterlaceModeHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::InterlaceModeHasBeenSet ( ) const
inline

Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Definition at line 439 of file AvcIntraSettings.h.

◆ Jsonize()

Aws::Utils::Json::JsonValue Aws::MediaConvert::Model::AvcIntraSettings::Jsonize ( ) const

◆ operator=()

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::operator= ( Aws::Utils::Json::JsonView  jsonValue)

◆ ScanTypeConversionModeHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::ScanTypeConversionModeHasBeenSet ( ) const
inline

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).

Definition at line 538 of file AvcIntraSettings.h.

◆ SetAvcIntraClass() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetAvcIntraClass ( AvcIntraClass &&  value)
inline

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

Definition at line 87 of file AvcIntraSettings.h.

◆ SetAvcIntraClass() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetAvcIntraClass ( const AvcIntraClass value)
inline

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

Definition at line 78 of file AvcIntraSettings.h.

◆ SetAvcIntraUhdSettings() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetAvcIntraUhdSettings ( AvcIntraUhdSettings &&  value)
inline

Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.

Definition at line 134 of file AvcIntraSettings.h.

◆ SetAvcIntraUhdSettings() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetAvcIntraUhdSettings ( const AvcIntraUhdSettings value)
inline

Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.

Definition at line 127 of file AvcIntraSettings.h.

◆ SetFramerateControl() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetFramerateControl ( AvcIntraFramerateControl &&  value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 209 of file AvcIntraSettings.h.

◆ SetFramerateControl() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetFramerateControl ( const AvcIntraFramerateControl value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 194 of file AvcIntraSettings.h.

◆ SetFramerateConversionAlgorithm() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetFramerateConversionAlgorithm ( AvcIntraFramerateConversionAlgorithm &&  value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 296 of file AvcIntraSettings.h.

◆ SetFramerateConversionAlgorithm() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetFramerateConversionAlgorithm ( const AvcIntraFramerateConversionAlgorithm value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 282 of file AvcIntraSettings.h.

◆ SetFramerateDenominator()

void Aws::MediaConvert::Model::AvcIntraSettings::SetFramerateDenominator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 355 of file AvcIntraSettings.h.

◆ SetFramerateNumerator()

void Aws::MediaConvert::Model::AvcIntraSettings::SetFramerateNumerator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 396 of file AvcIntraSettings.h.

◆ SetInterlaceMode() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetInterlaceMode ( AvcIntraInterlaceMode &&  value)
inline

Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Definition at line 471 of file AvcIntraSettings.h.

◆ SetInterlaceMode() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetInterlaceMode ( const AvcIntraInterlaceMode value)
inline

Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Definition at line 455 of file AvcIntraSettings.h.

◆ SetScanTypeConversionMode() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetScanTypeConversionMode ( AvcIntraScanTypeConversionMode &&  value)
inline

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).

Definition at line 572 of file AvcIntraSettings.h.

◆ SetScanTypeConversionMode() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetScanTypeConversionMode ( const AvcIntraScanTypeConversionMode value)
inline

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).

Definition at line 555 of file AvcIntraSettings.h.

◆ SetSlowPal() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetSlowPal ( AvcIntraSlowPal &&  value)
inline

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.

Definition at line 651 of file AvcIntraSettings.h.

◆ SetSlowPal() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetSlowPal ( const AvcIntraSlowPal value)
inline

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.

Definition at line 640 of file AvcIntraSettings.h.

◆ SetTelecine() [1/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetTelecine ( AvcIntraTelecine &&  value)
inline

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

Definition at line 710 of file AvcIntraSettings.h.

◆ SetTelecine() [2/2]

void Aws::MediaConvert::Model::AvcIntraSettings::SetTelecine ( const AvcIntraTelecine value)
inline

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

Definition at line 701 of file AvcIntraSettings.h.

◆ SlowPalHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::SlowPalHasBeenSet ( ) const
inline

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.

Definition at line 629 of file AvcIntraSettings.h.

◆ TelecineHasBeenSet()

bool Aws::MediaConvert::Model::AvcIntraSettings::TelecineHasBeenSet ( ) const
inline

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

Definition at line 692 of file AvcIntraSettings.h.

◆ WithAvcIntraClass() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithAvcIntraClass ( AvcIntraClass &&  value)
inline

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

Definition at line 105 of file AvcIntraSettings.h.

◆ WithAvcIntraClass() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithAvcIntraClass ( const AvcIntraClass value)
inline

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

Definition at line 96 of file AvcIntraSettings.h.

◆ WithAvcIntraUhdSettings() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithAvcIntraUhdSettings ( AvcIntraUhdSettings &&  value)
inline

Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.

Definition at line 148 of file AvcIntraSettings.h.

◆ WithAvcIntraUhdSettings() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithAvcIntraUhdSettings ( const AvcIntraUhdSettings value)
inline

Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K (CLASS_4K_2K). When you set AVC-Intra class to a different value, this object isn't allowed.

Definition at line 141 of file AvcIntraSettings.h.

◆ WithFramerateControl() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithFramerateControl ( AvcIntraFramerateControl &&  value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 239 of file AvcIntraSettings.h.

◆ WithFramerateControl() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithFramerateControl ( const AvcIntraFramerateControl value)
inline

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Definition at line 224 of file AvcIntraSettings.h.

◆ WithFramerateConversionAlgorithm() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithFramerateConversionAlgorithm ( AvcIntraFramerateConversionAlgorithm &&  value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 324 of file AvcIntraSettings.h.

◆ WithFramerateConversionAlgorithm() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithFramerateConversionAlgorithm ( const AvcIntraFramerateConversionAlgorithm value)
inline

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Definition at line 310 of file AvcIntraSettings.h.

◆ WithFramerateDenominator()

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithFramerateDenominator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 365 of file AvcIntraSettings.h.

◆ WithFramerateNumerator()

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithFramerateNumerator ( int  value)
inline

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Definition at line 406 of file AvcIntraSettings.h.

◆ WithInterlaceMode() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithInterlaceMode ( AvcIntraInterlaceMode &&  value)
inline

Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Definition at line 503 of file AvcIntraSettings.h.

◆ WithInterlaceMode() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithInterlaceMode ( const AvcIntraInterlaceMode value)
inline

Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

Definition at line 487 of file AvcIntraSettings.h.

◆ WithScanTypeConversionMode() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithScanTypeConversionMode ( AvcIntraScanTypeConversionMode &&  value)
inline

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).

Definition at line 606 of file AvcIntraSettings.h.

◆ WithScanTypeConversionMode() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithScanTypeConversionMode ( const AvcIntraScanTypeConversionMode value)
inline

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).

Definition at line 589 of file AvcIntraSettings.h.

◆ WithSlowPal() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithSlowPal ( AvcIntraSlowPal &&  value)
inline

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.

Definition at line 673 of file AvcIntraSettings.h.

◆ WithSlowPal() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithSlowPal ( const AvcIntraSlowPal value)
inline

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and (framerateDenominator) to 1.

Definition at line 662 of file AvcIntraSettings.h.

◆ WithTelecine() [1/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithTelecine ( AvcIntraTelecine &&  value)
inline

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

Definition at line 728 of file AvcIntraSettings.h.

◆ WithTelecine() [2/2]

AvcIntraSettings& Aws::MediaConvert::Model::AvcIntraSettings::WithTelecine ( const AvcIntraTelecine value)
inline

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture. When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

Definition at line 719 of file AvcIntraSettings.h.


The documentation for this class was generated from the following file: